Primary Energy Demand Research Articles

Pathway and Policy for China's Provincial Carbon Emission Peak

An effective way for China to achieve a carbon emission peak by 2030 is to encourage developed regions to take the lead in attaining carbon peaking at the regional level. Considering Jiangsu Province as an example, this study established a provincial low emissions analysis platform (LEAP-Jiangsu) model. It combined the improved multilevel logarithmic mean Divisia index (M-LMDI) model, Tapio decoupling model, and the synergistic effect of pollution and carbon reduction model to explore the key influencing factors of carbon emissions and carbon reduction paths. The improved M-LMDI model was used to analyze the factors influencing historical and future carbon emissions in Jiangsu Province. Based on the analysis results and planning objectives, a LEAP-Jiangsu model involving various development scenarios was established to predict the time and value of carbon emission peaks. The Tapio decoupling and synergistic effect models were used to clarify the relationship between carbon emissions and economic development, the synergistic effect of carbon, and air pollutant emission reduction. The prediction results demonstrated that the total primary energy demand of Jiangsu Province in 2035 was predicted to be approximately 401.2-474.6 Mt, and the final energy demand would be approximately 319.2-382.3 Mt. Jiangsu Province was most likely to achieve the goal of carbon peaking in 2025-2030, and the peak carbon emission was approximately 815.3-845.7 Mt. The contribution rates of energy conservation and emission reduction measures such as energy intensity reduction, industrial structure optimization, terminal electrification improvement, and energy structure adjustment were 33.1%, 26.8%, 21%, and 15.2%, respectively.

Petroleum++: The Expanded Scope of the Industry and Our Role in It

The expanded scope of our industry as it evolves means that members of the petroleum engineering profession will enjoy a long, rewarding career. At the same time, we need to continue developing our competencies to enable expected contributions in producing new forms of energy resources and mitigating climate change concerns, as well as the constant changes and advancements in our traditional role of producing oil and natural gas. Based on the projections of multiple groups including the US Energy Information Administration (EIA), the International Energy Agency (IEA), and several international and national oil companies, it is clear the world energy demand will continue to grow into the 2040s. Lower-carbon sources will be the fastest-growing among the various sources of energy, demand for oil will continue to increase at least into the 2030s, and demand for natural gas will continue to grow into the 2040s. The latest projection from IEA (October 2022) illustrates these points. For example, as I am writing this column, Norway approved more than $18 billion investments to develop 19 oil and gas fields. Consensus also appears to indicate that policy will influence the speed of change of the energy landscape, that energy transition will vary by region, and that the pace of the energy transition will depend on costs, infrastructure, project execution, and geopolitics. This indicates that multiple solutions are needed to satisfy energy demand, oil and gas will remain essential for decades, and technological developments will continue to be needed in all sources of energy and may end up changing the mix of energy sources in the future. Data and projections also show two important points. The required levels of investment to provide the world with its energy needs are lagging, and there will be a shift in the regional demand of energy. Needed investment in oil and gas should be about $900 billion annually. Following the COVID-19 pandemic, when investment dipped to $600 billion, investments have gradually increased but are not yet to the desired levels. For the new energy sources to reach the level needed for IEA’s Net Zero 2050 target, annual investment in the range of $2,600 billion is needed. Right now, this investment is around $1,700 billion. Projections for the regional share of the world economy indicates that Asia will have about 43% of the world economy by the year 2040 (currently at 35%) followed by North America at about 24% (currently at 26%) and the EU and the UK at about 17% (currently at 20%). Shares of Latin America and the Middle East will stay around the current levels of 7% and 4%, respectively, while Africa’s share will increase from about 4 to 5%. The tables show the changes in global primary energy demand as well as the changes in different regions. I obtained the information from the sources cited earlier. However, I converted the values from exajoules (1e18 joule, a measurement unit I cannot relate to) to BOE using a conversion factor of 1 exajoule = 163.45e6 BOE.

Life cycle assessment applied to a self-healing elastomer filled with ground tire rubber

In this study, we present the first life cycle assessment (LCA) of a self-healing styrene-butadiene rubber (SBR) used in the production of marine fenders. Results show that a rubber with healing capabilities is not environmentally attractive if it cannot last for the same lifetime as a conventional product due to its lower mechanical performance and higher energy consumption. To overcome these constraints, we added a sustainable filler, ground tire rubber, which improved the mechanical properties of the self-healing SBR (x6 increase in tensile strength). Although this addition involved additional sub-processes, the additional environmental impacts were outweighed by the benefits achieved through improved material performance (28% decrease in global warming potential - GWP and 26% in primary energy demand - PED). This study used primary data on experimental healing efficiencies and healing cycles rather than conservative assumptions, which provides a more representative and trustworthy LCA of self-healing rubbers. Our findings have significant implications for the rubber industry, as self-healing rubbers offer a promising avenue for reducing the environmental impact of synthetic materials.

Development of the virtual battery concept in the paper industry: Applying a dynamic life cycle assessment approach

Energy-intensive industries face the challenge of reducing carbon emissions while remaining competitive. Key measures include fossil fuel substitution, energy efficiency, and integration of renewable energy sources, but their fluctuating production profile makes them difficult to integrate and require industries to adapt their current consumption and production patterns to become more flexible.In this study, the virtual battery concept (VBC), exemplarily demonstrated for a specific site in the paper industry, is introduced and evaluated from an environmental, energetic, and techno-economic perspective. A mathematical optimization model of the class mixed integer linear programming (MILP) was applied to express the industrial site as VBC and derive the operational data basis for the subsequent life cycle assessment (LCA). A dynamic LCA approach is presented to allow the consideration and assessment of the temporal behavior of energy load profiles and their associated environmental implications.The results showed that compared to a static LCA, the dynamic approach leads up to 42 % lower greenhouse gas (GHG) emissions for 1 MJ of public electricity. The global warming potential (GWP) of the total energy supply chain was reduced by 40 % for electricity and 8 % for heat, respectively. By means of a scenario analysis, the GWP to produce one ton of paper was reduced up to 33 % compared to the business-as-usual (BAU) case to 672 kgCO2eq.r in the best case. However, the total primary energy demand (PED) increased by 34 %, but the fossil PED was reduced by 32 % and the renewable PED increased by 157 %. The renewable PED share covered up to 67 % of the total PED. The techno-economic analysis revealed total annual cost savings of up to 44 % to 64.6 € per ton of paper. Environmental costs were estimated to range from 79.6 to 88.9 € per ton of paper.The VBC is considered a promising approach to utilize regional renewable excess electricity effectively, reduce fossil-based energy generation, increase grid stability, and to avoid costly grid infrastructure investments in future. In principle, the VBC is site-independent and replicable to other industries but needs to be evaluated site specifically according to certain process characteristics and requirements.

Environmental Impact Analysis of Functional Retrofitting Measures in Buildings

A large number of existing building stock in India was built before the implementation of government guidelines mandating the Green Building Codes. These buildings have been operating with various inefficiencies pertaining to their resource consumption and emissions. Literature suggests that the option of functional retrofitting of building has a potential to reduce this inefficiency by up to 50%. This paper investigates this potential by analysing actual cases of functional retrofitting of buildings (for achieving greater operational efficiency) in Indian context. The environmental impact analysis in this study includes the impact categories of primary energy demand, global warming potential, abiotic depletion potential, ozone depletion potential and water resource consumption for both pre-retrofit and post-retrofit scenario of building. The results are then correlated to the initial cost of functional retrofitting for each case in order to identify the inter-relationship and trend with respect to the level of intervention opted for the cases.

On the Multi-Domain Impacts of Coupling Mechanical Ventilation to Radiant Systems in Residential Buildings

In the current context of joint efforts towards the decarbonisation of buildings, integrating occupants’ comfort and health with latest technological advancements for energy efficiency is at the center of the latest development of research, policies and professional practice. Radiant systems are encountering great success since the low-thickness systems can also be used in renovation projects for both heating and cooling, while guaranteeing optimal comfort. However, dehumidification is often required for optimal radiant cooling operation with no condensation risks, and the great potential of mechanical ventilation systems to optimally address the needs for dehumidification, air renewal, health and energy efficiency appears to be far from its full exploitation in the post-COVID-19 era. The present paper aims at providing a quantification of the energy and financial impacts of the implementation of a controlled mechanical ventilation system (CMV) coupled to a radiant system in a typical residential case study building in Italy. The results show that the sole CMV may decrease primary energy demand and energy costs by more than 30% and contribute to an increase in the smart readiness of the building by 8%, but further incentive policies must be developed to cover the still high investment and maintenance cost.

Carbon Life Cycle Assessment and Costing of Building Integrated Photovoltaic Systems for Deep Low-Carbon Renovation

Building integrated photovoltaic (BIPV) systems can achieve high yields through high percentages of building envelope surface coverage associated with material savings by substituting conventional building envelope components and avoiding land-use change to install open-land PV installations. This article discusses the life cycle assessment (LCA) and the life cycle costing (LCC) of BIPV systems in timber-hybrid building extensions and envelope renovation systems of three exemplary buildings in the Republic of Korea: apartment, mixed-use commercial/industrial, and low-rise multi-unit residential. The BIPV system’s electricity production was quantified with simulation tools. Minimum and average carbon LCAs were calculated using a global product inventory database for 50 years. Greenhouse gas (GHG) emission savings by substituting conventional energy supplies were calculated based on the associated primary energy demands. LCC calculations were based on international datasets for BIPV LCC for 25 and 50 years. As a result, the BIPV system-associated GHG emissions can be decreased by up to 30% with a payback time of 12 (apartment) to 41 (mixed-use building) years for buildings with full PV coverage. The positive cumulative net present value (NPV) for both LCC scenarios encourages economic investments in building renovations with BIPV systems.

Energy Analyses of Multi-Family Residential Buildings in Various Locations in Poland and Their Impact on the Number of Heating Degree Days

Reducing energy demand and greenhouse gas emissions in the construction industry is one of the daunting challenges to be addressed in the context of global warming. The purpose of these analyses was to examine how the energy class of a multi-family residential building regarding thermal insulation and type of ventilation affects the usable energy demand for heating and ventilation purposes, the length of the heating season, and the amount of demand for energy consumed by auxiliary devices. This article presents the energy analyses of multi-family residential buildings with identical technical parameters located in different locations in Poland. For research purposes, a total of 354 energy balances were compiled, covering 59 meteorological stations, 3 types of ventilation systems, and 2 building insulation standards. This article presents the ways in which the location and energy class of buildings affect the length of the heating season and the demand for energy required for heating and ventilation purposes. The results of the analyses carried out in this article show that the location and the energy class of the building have a significant impact on the demand for primary energy (EP). As a result, it was concluded that when designating a reference building for the energy rating system, its location should be taken into account and reference buildings should be designated considering climate zones.

Energy and greenhouse gases life cycle assessment of electric and hydrogen buses: A real-world case study in Bolzano Italy

The transportation sector plays an important role in the current effort towards the control of global warming. Against this backdrop, electrification is currently attracting attention as the life cycle environmental performance of different powertrain technologies is critically assessed. In this study, a life cycle analysis of the public transportation buses was performed. The scope of the analysis is to compare the energy and global warming performances of the different powertrain technologies in the city fleet: diesel, full electric and hydrogen buses. Real world monitored data were used in the analysis for the energy consumptions of the buses and to produce hydrogen in Bolzano. Compared to the traditional diesel buses, the electric vehicles showed a 43% reduction of the non-renewable primary energy demand and a 33% of the global warming potential even in the worst consequential scenario considered. The switch to hydrogen buses leads to very different environmental figures: from very positive if it contributes to a further penetration of renewable electricity, to hardly any difference if hydrogen from steam-methane reforming is used, to clearly negative ones (approximately doubling the impacts) if a predominantly fossil electricity mix is used in the electrolysis.

Legal Politics toward Natural Energy: Natural Gas Utilization in Indonesia

Indonesia is abundantly blessed with natural resources, including energy, among which natural gas holds a significant position. As of 2017, global demand for natural gas accounted for 23.4% of the total global primary energy demand. The substantial demand for natural gas can be attributed to its reputation as a clean and efficient energy source compared to fossil fuels. Natural gas possesses the potential to become a vital component of the energy mix, driving economic growth. Consequently, effective management of natural gas resources is essential to harness the full potential of oil and gas reserves in Indonesia, thereby maximizing benefits for the well-being of the population. In pursuit of this objective, the Indonesian government has implemented various regulations to provide a legal framework for natural gas management.

Renewable smart energy network: A thermoeconomic comparison between conventional lithium-ion batteries and reversible solid oxide fuel cells

Smart energy networks including renewables and energy storage systems are a promising technology for improving the sustainability of residential districts and private mobility. In this work, a smart energy network is analyzed, based on photovoltaic panels, electric energy storage systems, heat pumps and electric vehicles. The system consists of a fully electric residential district, where air-to-air heat pumps are used for space heating and cooling and air-to-water heat pumps provide domestic hot water; a photovoltaic field meets the power load of the residential district, including charging stations for electric vehicles. A district electric energy storage system is included for balancing power supply and demand: two storage technologies are considered and compared in this work: a lithium-ion battery and a reversible solid oxide fuel cell. These systems are modelled and dynamically simulated in Transient Systems Simulation Program (TRNSYS) 18. A case study is discussed, where the proposed systems exhibit promising results in terms of primary energy saving: for example, the renewable energy matches almost 74–77% of the district primary energy demand for the analyzed smart energy districts. Moreover, both the proposed systems achieve very profitable results with a payback period of 3.5–4.4 years. Both the analyzed layouts achieve very similar results.

Toward zero-emission buildings: a case study on a non-residential building in Germany using life cycle assessment and carbon sequestration of green infrastructure

Regarding greenhouse gas (GHG) emissions and further environmental impacts, such as acidification potential (AP), eutrophication potential (EP), and pollutants, the building sector plays an essential role in the global transformation toward a climate and environmentally friendly industry. In this paper, a non-residential building in Germany is analyzed regarding various emissions (GHG, AP, EP, pollutants, acoustic, light, and radiation) and the primary energy demand (PERT, PENRT) during its life cycle of 70 years. Life cycle assessment (LCA) according to DIN EN ISO 14040/14044 and DIN EN 15978 is used to determine and allocate the environmental impacts of the building. Building emissions are compared to the compensation potential of the green infrastructure onsite. Based on scenario analysis, recommendations to reduce the building emissions are given. The results show that there are emissions in every life cycle stage of the building. Using green instead of conventional electricity for operational energy reduces GHG emissions, AP, and EP by more than 90%. Emissions that already occurred can only be reduced or compensated slightly: the carbon sequestration of the building’s green infrastructure and its outdoor facilities can compensate nearly 6% of the total GHG emissions. Therefore, the authors claim that strategies to avoid, reduce and compensate emissions should take place in early planning phases to realize zero-emission buildings.

Resilience assessment methodology of natural gas network system under random leakage

Natural gas accounts for more than 20% of global primary energy demand. Potential natural or man-made disasters can cause natural gas supply shortages, with severe economic and social consequences. System resilience is difficult to achieve because of many factors affecting the natural gas network system (NGNS) and the uncertainty of the timing, location, and shock strengths. A new methodology for evaluating the resilience of NGNS under random leakage conditions is developed by combining Monte Carlo simulation and hydraulic analysis of an unsteady flow. A resilience metric based on gas supply capacity and reliability is proposed. The extensive time delay and nonlinear dynamic characteristics of the system caused by the compressibility of the natural gas are considered in combination with hydraulic analysis. System uncertainty in damage and recovery states is resolved by batch simulation of the random leakage. The resilience value is calculated by integrating the performance curve. The proposed methodology is demonstrated on the NGNS of Shandong Province, China, and results show that it can effectively assess the resilience of the NGNS under random leakage conditions.

Straw density board vs. conventional density board: Is straw density board more sustainable?

The widespread use of density boards in various industries has caused a series of environmental issues. The results of this study can inform policy-making and facilitate the sustainable development of density boards. The research focuses on the comparison between 1m3 conventional density board and 1m3 straw density board, with the system boundary defined as "from cradle to grave." Their life cycles are evaluated across three stages: manufacturing, utilization, and disposal. To facilitate environmental impact comparisons, the production stage was divided into four scenarios based on different power supply techniques. To identify the environmental break-even point (e-BEP), variable parameters for transport distance and service life were incorporated into the usage phase. The disposal stage evaluated the most prevalent disposal method (100 % incineration). Regardless of the power supply method, the total environmental impact of conventional density board throughout its life cycle is always higher than that of straw density board, owing to the large amount of electricity consumption and the utilization of urea-formaldehyde (UF) resin adhesives in the raw material stage of conventional density boards. During the production stage, while the conventional manufacture of density boards results in environmental impacts ranging from 57 % to 95 %, which surpasses those of straw-based alternatives at 44 % to 75 %, modifying the power supply technique can alleviate such impacts by 1 % to 54 % and 0 % to 7 %, respectively. Thus, altering the power supply technique can effectively mitigate the ecological footprint of conventional density boards. Moreover, when assuming a service life, the remaining eight environmental impact categories exhibit an e-BEP at or prior to 50 years, with the exception of the primary energy demand (PED) values. Based on the environmental impact results, relocating the plant to a more judicious geographical location would indirectly increase the break-even transport distance and consequently mitigate the environmental impact.

The Role Of Hydrogen In Future Climate-neutral Economy

Global annual CO2 emissions have increased more than 16 times in 2021 compared to 1990 and are expected to keep growing. Renewable energy is a critical way to reduce the impact on the climate. However, renewable energy production’s power output does not necessarily match the demand. The intermittent character of renewable electricity generation requires the storage of produced energy. Green hydrogen production via electrolysis is an opportunity to increase the integration of renewable energy sources and move hard-to-decarbonize sectors to climate neutrality. This research aims to assess the potential role of hydrogen in decarbonizing the energy sector in Latvia in the long term. Latvia’s energy system is modeled using the input/output deterministic energy system analysis model EnergyPlan. The model includes all the primary energy demand sectors, energy production, and storage, and allows the analysis of the impact of different strategies on the total costs and emissions of the system by 2050. The results show that the production potential of green hydrogen will increase significantly by 2030, taking into account the existing plans for the installation of 800 MW of wind and solar generating capacity on a national scale. The most significant potential is associated with using hydrogen in the transport sector in vehicles and in producing alternative fuels. Other uses include the decarbonization of the natural gas sector. In these scenarios, it is possible to reduce CO2 emissions while annual system costs increase.

Calcium looping in the steel industry: GHG emissions and energy demand

The development of innovative solutions to decarbonize hard-to-abate sectors is a priority challenge in the quest to mitigate climate change. The GHG emission mitigation potential of the carbon capture Calcium Looping process (CaL) is investigated in this work. Two steelmaking routes are modeled: a blast furnace and a basic oxygen furnace (BF-BOF), and a direct reduction process and an electric arc furnace (DR-EAF), both of which are coupled with CaL technology. The carbon footprints of the two systems were evaluated, through an eco-design approach, with the aim of quantifying the GHG emissions and identifying the hotspots of the emissions. DR-EAF was found to be characterized by lower GHG emissions than BF-BOF (0.9 t vs 2.1 t CO2eq per tonne of liquid steel produced), as it is intrinsically more efficient and less carbon intensive. For this reason, the adoption of the CaL technology resulted to be more effective when applied to the BF-BOF, as it led to a reduction in GHG emissions of up to 66%, with respect to baseline plant configuration without the CaL system. The primary energy demand increased considerably by the integration of CaL in BF-BOF and this would be amplified in a future scenario dominated by renewable energy resources. We also remarked the importance of the CaL technology being circular to reduce and reuse the spent material deployed for CO2 sequestration. This work ends with a parametric analysis that points out the importance of the timescale of climate change metrics on the evaluation of the carbon footprint.

A comparison of three different delivery methods for achieving CRISPR/Cas9 mediated genome editing in Cichorium intybus L.

Root chicory (Cichorium intybus L. var. sativum) is used to extract inulin, a fructose polymer used as a natural sweetener and prebiotic. However, bitter tasting sesquiterpene lactones, giving chicory its known flavour, need to be removed during inulin extraction. To avoid this extraction and associated costs, recently chicory variants with a lower sesquiterpene lactone content were created by inactivating the four copies of the germacrene A synthase gene (CiGAS-S1, -S2, -S3, -L) which encode the enzyme initiating bitter sesquiterpene lactone biosynthesis in chicory. In this study, different delivery methods for CRISPR/Cas9 reagents have been compared regarding their efficiency to induce mutations in the CiGAS genes, the frequency of off-target mutations as well as their environmental and economic impacts. CRISPR/Cas9 reagents were delivered by Agrobacterium-mediated stable transformation or transient delivery by plasmid or preassembled ribonucleic complexes (RNPs) using the same sgRNA. All methods used lead to a high number of INDEL mutations within the CiGAS-S1 and CiGAS-S2 genes, which match the used sgRNA perfectly; additionally, the CiGAS-S3 and CiGAS-L genes, which have a single mismatch with the sgRNA, were mutated but with a lower mutation efficiency. While using both RNPs and plasmids delivery resulted in biallelic, heterozygous or homozygous mutations, plasmid delivery resulted in 30% of unwanted integration of plasmid fragments in the genome. Plants transformed via Agrobacteria often showed chimerism and a mixture of CiGAS genotypes. This genetic mosaic becomes more diverse when plants were grown over a prolonged period. While the genotype of the on-targets varied between the transient and stable delivery methods, no off-target activity in six identified potential off-targets with two to four mismatches was found. The environmental impacts (greenhouse gas (GHG) emissions and primary energy demand) of the methods are highly dependent on their individual electricity demand. From an economic view - like for most research and development activities - employment and value-added multiplier effects are high; particularly when compared to industrial or manufacturing processes. Considering all aspects, we conclude that using RNPs is the most suitable method for genome editing in chicory since it led to a high efficiency of editing, no off-target mutations, non-transgenic plants with no risk of unwanted integration of plasmid DNA and without needed segregation of transgenes.

High cost of slow energy transitions for emerging countries: On the case of Egypt's pathway options

The Paris Agreement targets to halt the progression of climate change necessitate global cooperation and renewable energy uptake in developed and developing countries at similar rates. This study explores the energy transition pathway options for Egypt across the power, heat, transport, and desalination sectors as a representative case study for other emerging sunbelt economies. The LUT Energy System Transition Model has been used to investigate the feasibility of six scenarios, including four variations of best policy, delayed policy, and current policy scenarios. The least-cost solution, achieving 100% renewable energy and zero CO2 emissions by 2050, is dominated by solar photovoltaics at 90% of the total primary energy demand. Key transition enablers are the excellent and low-cost solar resources, energy storage, and Power-to-X technologies allowing high electrification and full sector coupling. The results reveal that the current and delayed policy scenarios are the most expensive pathways, highlighting the value of leapfrogging into a fully renewable system. Such a transition would require policy reforms that balance investment risks in emerging economies and enable its financial mobilisation. The structural results of this study provide a reliable guide for energy transition planning in Egypt as well as other emerging sunbelt economies.

The effect of low-carbon processes on industrial excess heat potentials for district heating in the EU: A GIS-based analysis

Excess heat from industrial processes can be utilized in district heating networks, thereby reducing the primary energy demand and possibly the CO2 emissions for generating district heating. Numerous studies found a substantial potential of industrial excess heat, but have not systematically considered future changes in the energy system that will affect its utilization potential. Industrial production is set to transform to low-carbon processes and district heating needs to be generated without the use of fossil fuels. We quantify industrial excess heat using spatial matching for the EU-27, and considering the impact of the transformation to a climate-neutral energy system. The first step identifies excess heat potentials from energy-intensive industries as point sources, and considers process changes. The subsequent step spatially matches these excess heat potentials to district heating areas using a GIS-based approach. The results show that the amount of available excess heat will decrease significantly due to industry transformation. At the same time, the utilization could be increased due to lower district heating system temperatures and expanding district heating areas, resulting in 3–36 TWh per year. At local level, industrial excess heat can make a significant contribution to the supply of district heating in the future, but the major share will need to come from renewables.

Availability of Biomass and Potential of Nanotechnologies for Bioenergy Production in Jordan

Jordan’s energy situation is in a critical state of dependency, with the country relying heavily on imports to satisfy its ever-increasing energy requirements. Renewable energy is a more competitive and consistent source of energy that can supply a large proportion of a country’s energy demand. It is environmentally friendly and minimizes atmospheric pollutant emissions. Thus, bioenergy has the potential to be a crucial alternative energy source in Jordan. Biomass is the principal source of bioenergy; it accounts for approximately 13% of the primary energy demand and is anticipated to supply half of the total primary energy demand by 2050. Nanotechnology has emerged as an important scientific research area with numerous applications, including biofuels. This review summarizes the application of nanoparticles to improve the properties and processes of biofuels. It presents the availability and viability of nanotechnology-supported bioenergy production in Jordan. Jordan generates up to 5.8 million tons of biomass each year and has access to abundant nonedible plant resources (such as Jojoba, Handal, and Jatropha). The theoretical energy potential of waste and residue available in Jordan was also assessed; it was discovered that the 1.28 million tons of dry crop residues (vegetables, fruits, and farming crops) could generate 6.8 PJ of energy per year and that biogas could be generated at a rate of 817 MCM/year