Presurgical Orthodontic Treatment Research Articles

A qualitative study of preoperative anxiety in orthognathic patients: The patient perspective

Increased preoperative anxiety may have an adverse impact on the patient experience. This qualitative study therefore aimed to explore those factors affecting anxiety in the approach to orthognathic surgery. A total of 28 orthognathic patients who had completed their presurgical orthodontic treatment and were within 8 weeks before their surgery underwent one-to-one in-depth interviews. The interviews explored their experience in the preoperative period, with the focus on aspects relating to anxiety. Interviews were audio-recorded and transcribed verbatim, and data were then analyzed using a thematic framework approach. Eight themes and associated subthemes were identified. The first theme related to time and described the approach to the surgery and the transience of the side effects. The second theme discussed control and how the need for control may affect anxiety; the third focused on fear related to the surgery and the element of "the unknown." The fourth theme highlighted the importance of trust between patients and clinicians, whilst the fifth focused on information and its delivery, which was crucial for managing uncertainty. The sixth theme centered on expectations about the surgery and the patient's ability to cope, and the seventh discussed coping strategies that were effective in alleviating anxiety. The final theme focused on the benefits of a strong, effective support system in reducing anxiety. No distinct typologies emerged from the data. Recommendations for consideration by clinicians are presented. The findings provide a novel insight into the multifactorial nature of preoperative anxiety in orthognathic patients and also highlight the important role of the clinical team in creating a supportive environment to help reduce patient anxiety.

Comparative evaluation of alveolar bone remodeling and root length changes in fixed appliances versus clear aligners: A retrospective cohort study on skeletal Class III malocclusion treatment

The retrospective study examined changes in the root length and alveolar bone surrounding maxillary incisors in patients with skeletal Class III malocclusion treated by surgical orthodontic treatment with either fixed appliances (FAs) or clear aligners (CAs). A total of 60 subjects were divided based on appliance type used. Cone beam computed tomography scans were taken at three stages: before treatment, after presurgical orthodontic treatment, and post-treatment for both groups. Vertical alveolar bone level and horizontal alveolar bone thickness (ABT) were measured at four heights (3, 6, and 9 mm from the cementoenamel junction, and the root apex), along with root length, at these time points. Both groups showed a decrease in root length, with the CA group experiencing a significantly smaller reduction (0.4 ± 0.79 mm) compared with the FA group (0.64 ± 0.8 mm; P = 0.02). The FA group demonstrated more significant reduction in palatal ABT (P < 0.05) and greater root resorption, whereas the CA group exhibited considerable labial marginal bone resorption (P = 0.007) and a notable decrease in labiolingual inclination (P = 0.042). The findings suggest that FA and CA might lead to decreased ABT and significant root resorption, with FA therapy likely resulting in more pronounced effects. Both modalities led to notable vertical bone loss, particularly, on the labial side of the maxillary incisors in the CA group during postsurgical orthodontic treatment. Preventing iatrogenic deterioration of periodontal support surrounding the incisors is crucial during presurgical and postsurgical phases.

Simultaneous labial and lingual augmented corticotomy assisted presurgical orthodontics in class III patients: the morphological aspects of the mandibular anterior ridge with cone-beam computed tomography

ObjectivesThis study aims to investigate the changes in alveolar bone following the simultaneous performance of labial and lingual augmented corticotomy (LLAC) in patients with insufficient alveolar bone thickness on both the labial and lingual sides of the mandibular anterior teeth during presurgical orthodontic treatment.Materials and methodsThirth-five surgical patients with skeletal Class III malocclusion were included: 19 (LLAC group) accepted LLAC surgery during presurgical orthodontic treatment, and 16 (non-surgery group, NS) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T0) and at the completion of presurgical orthodontic treatment (T1). The amount of vertical alveolar bone and contour area of the alveolar bone in the labial and lingual sides of mandibular incisors were measured.ResultsAfter presurgical orthodontic treatment, the contour area of the alveolar bone at each level on the lingual side and alveolar bone level on both sides decreased significantly in the NS group (P < 0.001). However, the labial and lingual bone contour area at each level and bone level increased significantly in the LLAC group (P < 0.001). The bone formation rate in the lingual apical region was the highest, significantly different from other sites (P < 0.001).ConclusionsDuring presurgical orthodontic treatment, LLAC can significantly increase the contour area of the labio-lingual alveolar bone in the mandibular anterior teeth to facilitate safe and effective orthodontic decompensation in skeletal Class III patients.Clinical relevance: This surgery has positive clinical significance in patients lacking bone thickness (< 0.5 mm) in the labial and lingual sides of the lower incisors.

The Effects of Presurgical Orthodontic Treatment on the Outcome of Secondary Bone Graft for Individuals With Cleft Lip and Palate

Background/Objective: Alveolar bone graft (ABG) or repair has become a routine part of treatment protocols for individuals with cleft lip and/or palate. However, the necessity and potential benefits of presurgical orthodontic treatment in influencing the outcomes of secondary alveolar bone grafting remain inconclusive. This systematic review aimed to assess the impact of presurgical orthodontics on preparing patients for secondary alveolar bone grafts. Study Design: The authors systematically searched for relevant articles in PubMed, Web of Science, and Embase databases spanning the period from January 1, 2000, to December 31, 2023, using keywords related to alveolar bone grafting and orthodontic treatment for patients with cleft lip and/or palate. The review encompassed various study designs, including prospective and retrospective studies, observational studies, cross-sectional studies, randomized and nonrandomized clinical trials, cohort studies, and case-control studies. The review adhered to Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, and the risk of bias was evaluated in studies selected for full-text review. Results: The search strategy identified 809 publications. After initial screening and application of exclusion criteria, 11 studies were included for final review. Three were prospective studies, 8 were retrospective studies, and 3 were cross-sectional cohort studies. On the basis of ROBINS-I and RoB 2 risk assessment, 9 studies were found to be of moderate risk of bias, one study was categorized as of high risk of bias, and 1 study was categorized as low risk of bias. Conclusions: Drawing from the latest and most reliable studies, 7 out of 11 included studies provided compelling evidence that presurgical orthodontics preceding alveolar bone grafting (ABG) leads to significantly improved outcomes compared with cases without presurgical orthodontic intervention. Notably, individuals with specific conditions, such as severely collapsed upper arch and mispositioned upper incisors, appear to derive the greatest benefits from presurgical orthodontic treatment. However, a call for additional studies characterized by high methodological quality and with longer follow-up periods is emphasized to enhance the safety considerations for both practitioners and patients concerning the utilization of presurgical orthodontics in the treatment of individuals with cleft lip and palate.

A Case Study on Orthodontic-Surgical Management of Skeletal Class III Malocclusion in Adults: Clinical Approach and Outcomes

This article presents a case study illustrating the successful management of skeletal Class III malocclusion in an adult through an orthodontic-surgical approach. The clinical case outlines the entire process, from initial assessment to post-treatment outcomes, conducted within our service. Key steps include diagnostic planning using advanced tools such as 3D imaging and virtual surgery simulation. Pre-surgical orthodontic treatment was carefully planned to prepare dental and skeletal structures for surgical correction. Orthognathic surgery was performed precisely according to the established plan, followed by a post-surgical orthodontic phase to finalize occlusion. Short-term and long-term outcomes are evaluated, highlighting significant improvement in facial aesthetics, occlusal function, and post-treatment stability. This case study demonstrates the effectiveness of our integrated approach in managing skeletal Class III malocclusions in adults, underscoring the importance of interdisciplinary collaboration for optimal outcomes

Lower incisor position in skeletal Class III malocclusion patients: a comparative study of orthodontic camouflage and orthognathic surgery.

To determine the difference between orthodontic camouflage and orthodontic-orthognathic surgery using the traditional cephalometric measurement IMPA and the newly proposed IA/PAMD, the angle between the long axis of the lower incisor (IA) and the principal axis of the mandibular alveolus (PAMD). This study included 40 cases each in the orthodontic camouflage group (OG) and orthodontic-orthognathic surgery group (SG). The differences between the IMPA and IA/PAMD before and after treatment were compared between the two groups. T0 lateral cephalometric images of the 10 cases with the highest and lowest increase in the IA/PAMD were analyzed to identify characteristics associated with a higher risk of overdecompensation of the lower incisors during presurgical orthodontic treatment. Both the OG and SG showed a significant improvement in hard- and soft-tissue measurements. However, in the OG, there was significant lingual inclination of the lower incisor but only a small change in the IA/PAMD. In the surgical group, the IMPA was close to 90° after treatment, but the IA/PAMD significantly increased. In orthodontic camouflage, the lower anterior teeth were significantly moved lingually with a better root-bone relationship. However, this relationship deteriorated in some surgical patients. Therefore, it is important to conduct cephalometric or cone-beam computed tomography examinations during preoperative orthodontics to identify and prevent possible periodontal risks.

Three-dimensional assessment of periodontal support of lower incisors for skeletal Class II malocclusion undergoing presurgical orthodontic treatment with different vertical skeletal patterns

BackgroundThe aim of the present study was to compare periodontal support changes during retraction of mandibular anterior teeth for skeletal Class II malocclusion with different facial divergence and to analyze relevant factors influencing bone remodeling by applying three-dimensional (3D) cone-beam computed tomography (CBCT) reconstruction technology.MethodsForty-eight patients with Class II malocclusion requiring surgical orthodontic treatment enrolled in the study were divided into the hyperdivergent group (n = 16), normodivergent group (n = 16) and hypodivergent group (n = 16) according to their vertical skeletal patterns. Cone-beam computed tomography (CBCT) scans were obtained before treatment (T1) and after presurgical orthodontic treatment (T2). The two-dimensional (2D) alveolar bone morphology, movement of mandibular central incisors and volume of the alveolar bone around incisors were measured on the labial and lingual sides by 3D CBCT reconstruction technology. Statistical analyses were performed with one-way ANOVA, paired t tests and multiple linear regression.ResultsDuring presurgical orthodontic treatment, the alveolar bone height on the labial side of the hyperdivergent group decreased significantly (P ≤ 0.05), but was maintained in the normodivergent and hypodivergent groups (P > 0.05). However, the alveolar bone volume, alveolar bone thickness at each level and alveolar bone height on the lingual side decreased significantly for all the groups. Apart from the initial morphometric measurements at T1, the morphology of lingual alveolar bone at T2 was significantly influenced by the direction and amount of tooth movement. Horizontal retraction and vertical protrusion of the root apex were negatively related to the alveolar bone on the lingual side after presurgical orthodontic treatment.ConclusionFor Class II malocclusion patients undergoing presurgical orthodontic treatment, the changes in the periodontal support of the lower central incisors varied in different vertical skeletal patterns. There exists a great periodontal risk of alveolar bone resorption on the lingual side for various vertical types. To avoid alveolar bone deterioration, it is essential to investigate the bone remodeling of patients with different alveolar bone conditions and cautiously plan tooth movement prior to orthodontic treatment. Moreover, 3D measurements based on CBCT construction can provide complementary information to traditional 2D measurements.

COMBINED ORTHODONTIC AND SURGICAL TREATMEN IN PATIENT WITH MANDIBULAR PROGNATHISM

The aim of this case was to present a combined orthodontic-surgical treatment for a 30-year-old patient. The initial clinical examination revealed a Class III malocclusion, concave profile, 4.5mm overjet, and 2mm overbite. The treatment plan included orthodontic preparation with fixed appliances, surgical correction of skeletal discrepancies, and post-surgical orthodontic treatment. Lateral cephalograms were taken before the orthodontic therapy, just before the surgical intervention, and after the treatment, following the removal of fixed appliances. On the initial lateral cephalogram SNB angle was 88°, ANB -5°, SpP/MP 28°, total Bjork’s polygon angle 405°, I/SpP 71°, i/MP 111° and mandibular corpus length was increased by +11mm. On the final post-surgical lateral cephalogram, after the intervention and appliance removal the SNB angle was 81°, ANB 3°, SpP/MP 25°, total Bjork’s polygon angle 398°, I/SpP 64°, i/MP 96° and man- dibular corpus length was increased by +3mm. The pre-surgical orthodontic treatment lasted 12 months, followed by bimaxillary surgery. The post-surgical orthodontic treatment lasted 12 months. After appliance removal, a retentive phase with night-time wear of retainers was implemented. The result was stable Class I occlusion, satisfactory profile appearance, 2.5mm overbite, and 2mm overjet.

Outcome measures of the surgery first approach for orthognathic correction of dentofacial deformities

In the surgery-first approach (SFA), orthognathic surgery is performed without the need for presurgical orthodontic treatment. This study was aimed at assessing the treatment durations and occlusal outcomes for a consecutive cohort of patients, with a range of dentofacial deformities, who had completed orthognathic treatment using SFA. The duration of orthognathic treatment was measured. The overall change in occlusion, and the quality of the final occlusion, were evaluated using the patients’ study casts. A single, independent, calibrated operator carried out the occlusal scores, using the validated Peer Assessment Rating (PAR) index. This was repeated to test intraoperator reliability. A total of 51 patients completed surgery-first treatment during the study period. The mean (range) age at surgery was 23.3 (15–47) years. The pre-treatment skeletal jaw relationship was Class III in 39 cases, and Class II in 12 cases. The mean (SD) overall treatment duration was 11.7 (5.7) months. The intraexaminer reliability of assessing the occlusion was high. The PAR scores confirmed a significant improvement in the quality of occlusion at the completion of treatment, which compares favourably with previous studies on the conventional orthodontics-first approach. The surgery first approach can be effective at correcting both Class II and Class III malocclusion types with reduced treatment times.

Classification of Skeletal Phenotypes of Adult Patients With Cleft Skeletal Class III Malocclusion Using Principal Component Analysis and Cluster Analysis.

The purpose of this study was to classify the skeletal phenotypes of adult patients with skeletal class III (C-III) malocclusion and unilateral or bilateral cleft lip and palate using principal component analysis and cluster analysis. The samples consisted of 81 adult C-III patients with cleft lip and palate (CLP) who underwent orthognathic surgery (OGS) or distraction osteogenesis (59 males and 22 females; 50 unilateral cleft lip and palate and 31 bilateral cleft lip and palate; mean age when lateral cephalograms were taken, 22.2±4.6y). Thirteen angular and one ratio cephalometric variables were measured. Using 4 representative variables obtained from principal component analysis (SNA, SNB, Gonial angle, and Bjork sum), K-means cluster analysis was performed to classify the phenotypes. Then, statistical analysis was conducted to characterize the differences in the variables among the clusters. Five clusters were obtained from 3 groups: severely retrusive maxilla and moderately retrusive mandible group: cluster-1 (23.5%, severely hyperdivergent pattern), cluster-4 (27.2%, moderately hyperdivergent pattern), and cluster-5 (11.1%, normodivergent pattern); moderately retrusive maxilla and normal mandible group: cluster-2 (30.9%, normodivergent pattern); normal maxilla and moderately protrusive mandible group: cluster-3 (7.4%, normodivergent pattern). Although skeletal phenotypes were diverse, distribution of sex and cleft type did not differ among 5 clusters ( P >0.05). Sixty-two percent of cleft patients showed a severely retrusive maxilla and moderately retrusive mandible (cluster-1, cluster-4, and cluster-5), which indicated that these are the main cause of skeletal C-III malocclusion in CLP patients who were treated with OGS. Therefore, it is necessary to consider presurgical orthodontic treatment and surgical planning based on the skeletal phenotypes of CLP patients.

Outcomes of alveolar cleft repair in complete cleft lip and palate after tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy.

Gingivoperiosteoplasty is often used for reconstruction of alveolar defects in infants with cleft lip and palate. This study aimed to examine outcomes of tertiary gingivoperiosteoplasty, which has not previously been investigated. This prospective study included 11 adults with complete cleft lip and palate (n = 12 sites) who consecutively underwent segmental Le Fort I osteotomy and concomitant gingivoperiosteoplasty for correction of skeletal class III deformity, nasoalveolar fistula and alveolar cleft. Outcomes included clinical and radiographic evaluations of gingivoperiosteoplasty at the time of osteotomy (presence of nasoalveolar fistula, residual cleft defect and unsupported root ratio of cleft-adjacent teeth), and determination of influencing factors for the clinical success of alveolar cleft repair. Study variables included age, gender, pre-surgical orthodontic treatment and alveolar cleft width of cleft-adjacent canine and angulation between cleft-adjacent teeth before surgery and 1-week postsurgery. Posttreatment, no nasoalveolar fistula remained. The residual cleft defect decreased significantly (p < 0.01). The unsupported root ratio of cleft-adjacent teeth did not differ (p > 0.05); eight cleft sites reached Bergland I or II (67% success). One-week postsurgery, the minimal alveolar cleft width of cleft-adjacent canine was significantly less in the success group compared with the failed group (p = 0.01). Tertiary gingivoperiosteoplasty and segmental Le Fort I osteotomy decreased nasoalveolar fistulas and induced alveolar bone formation. The minimal alveolar cleft width immediately after surgery was the major influencing factor of clinical success. Segmental Le Fort I osteotomy with simultaneous gingivoperiosteoplasty efficaciously repairs adult alveolar clefts.

Effect of Pre-Surgical Orthopedic Treatment on Hard and Soft Tissue Morphology in Infants with Cleft Lip and Palate

The frequency of cleft lip and palate births in Japan is approximately 0.146%. The study aimed to compare the effects of NAM on restoring nasal morphology and improving extraoral nasal morphology in children with cleft lip and palate in the first stage of treatment using 3D imaging and oral model analysis. The subjects were five infants (37.6 ± 14.4 days old) with unilateral cleft lip and palate. The images taken with the 3D analyzer and oral model used for constructing the NAM at the first examination (baseline) and at the completion of the pre-surgical orthodontic treatment (157.8 ± 37.8 days old) were analyzed. The cleft distance was measured at the upper, middle, and lower points on the 3D images. On the model, the cleft jaw width at the maximum protrusion of the healthy and affected sides of the alveolar bone was measured. After the pre-surgical orthopedic treatment, the measured value on the model decreased significantly by a mean of 8.3 mm from baseline, and the cleft lip width narrowed by an average of 2.8 ± 2.2, 4.3 ± 2.3, and 3.0 ± 2.8 mm at the upper, middle, and lower points of the cleft, respectively. Pre-surgical orthopedic treatment using NAM can help narrow the width of the cleft jaw and lip. The sample size is stated at the study limit in the paper.

Comparison of Alveolar Bone Grafting Outcomes using CBCT in Individuals with UCLP Based on the Presurgical Orthodontic Treatment Methods.

The purpose is to evaluate outcomes of alveolar bone grafting based on the pre-grafting orthodontic preparation methods. Retrospective analysis of individuals with unilateral cleft lip and palate. 28 individuals with non-syndromic UCLP from two craniofacial centers, 14 individuals each from XXXX and XXXX. The alignment group underwent maxillary expansion with incisors alignment while the non-alignment group underwent only maxillary expansion for presurgical orthodontic preparation. Initial and post-surgical CBCT scans were compared to observe changes in angulation of the incisor adjacent to the cleft site, alveolar bony root coverage, and bone graft outcomes. In the alignment group, the buccolingual rotation decreased by 32.35 degrees (p = .0002), the anteroposterior inclination increased by 14.01 degrees (p = .0004), and the mesiodistal angulation decreased by 17.88 degrees (p = .0001). Alveolar bony coverage did not change after bone graft in both groups, and no difference was observed between the groups. Chelsea scale showed satisfactory bone graft outcome (category A, C) in 12 cases (85.71%) in the alignment group and 11 cases (78.51%) in the non-alignment group. The volumetric measurement showed the alignment group had better bone fill of 69.85% versus 51.45% in the non-alignment group (p = .0495). Alveolar bony coverage on the tooth adjacent to cleft sites did not change with alveolar bone grafting surgery in either of the alignment and non-alignment group. Presurgical orthodontic alignment does not induce root exposure nor poorer bone grafting outcome.

Effect of augmented corticotomy-assisted presurgical orthodontic treatment on alveolar bone fenestration and dehiscence in skeletal class III patients

Background/purposeAlveolar bone fenestration and dehiscence is common in untreated patients and potentially harmful. This study was to evaluate the effect of augmented corticotomy (AC) on the prevention and treatment of alveolar bone defects in skeletal class III high-angle patients during presurgical orthodontic treatment (POT). Materials and methodsFifty patients with skeletal Class III high-angle malocclusion were enrolled, of whom 25 patients (G1) underwent traditional POT and 25 patients (G2) received AC during POT. The alveolar bone fenestration and dehiscence around the upper and lower anterior teeth were measured by CBCT. The incidence and transition of fenestration and dehiscence in the two groups were compared by the chisquare and Mann‒Whitney rank-sum tests. ResultsBefore treatment (T0), the incidence of fenestration and dehiscence around the anterior teeth of all patients was 39.24% and 24.10%, respectively. After POT (T1), the incidence of fenestration in G1 and G2 was 49.83% and 25.86%, respectively, and the incidence of dehiscence in G1 and G2 was 58.08% and 32.07%, respectively. For teeth without fenestration and dehiscence at T0, more anterior teeth in G1 exhibited fenestration and dehiscence at T1 than in G2. For teeth with fenestration and dehiscence at T0, most transitions in G1 were maintained or worsened, but “cure” cases were observed in G2. After POT, the cure rates of fenestration and dehiscence in G2 were 80.95% and 91.07%, respectively. ConclusionDuring the POT of skeletal Class III high-angle patients, augmented corticotomy can significantly treat and prevent alveolar bone fenestration and dehiscence around anterior teeth.

Orthodontic and Orthognathic Treatment Combined withSurgically Assisted Rapid Maxillary Expansion in an Adult Patient with a Hyperdivergent Skeletal Pattern.

In this case study, we report the successful treatment of a 35-year-old woman with a hyperdivergent skeletal pattern, open bite and severe transverse deficiency, exhibiting a skeletal Class III malocclusion. The treatment plan included 3D correction of these issues with surgically assisted rapid maxillary expansion (SARME) to solve the transverse deficiency, presurgical orthodontic treatment including aligning and levelling of the teeth in both arches, LeFort I osteotomy and bilateral sagittal split ramus osteotomy, and postsurgical correction of malocclusion. Orthodontic treatment was performed with labial brackets, and the patient achieved satisfactory occlusion and a significantly improved facial profile. Retention at the 1-year follow-up showed stable occlusion and arch forms with a harmonious facial profile.

Complex case treatment: Is there a limit for surgery-first approach?

Are there any limits for Surgery-first approach? the article strives to identify the tenets of effective management of complex cases, such as facial asymmetry, with surgery-first approach. The main purpose of the article is in attempting to itemize prerequisites or determining factors, through various degrees of facial asymmetry severity, for the successful management of facial asymmetry cases. The key factors such as (1) assessment of chin deviation, (2) quantification or discernment of transverse occlusal plane canting, (3) spatial orientation evaluation of differential anterior and posterior region transverse occlusal canting, and (4) contemplations of six degrees of freedom (6DoF) (translation movements combined with rotation axis - pitch, roll and yaw) are evaluated. Furthermore, dental alignment, severity of mandibular and maxillary occlusal (anterior and posterior) plane canting, critical cephalometric parameters, such as, incisor mandibular plane angle, and other vital sub- components of facial asymmetry are analysed, in detail. Subsequently, these are coherently synchronized with the maxillomandibular complex (MMC) rotation surgery during planning for the successful execution of facial asymmetry correction. Additionally, the article describes the (1) usage of orthodontic arch wires, (2) selection criteria of specific surgical osteotomies, and (3) coordination of maxillary and mandibular dentition to establish a transitional or treatable malocclusion. In conclusion, a thorough evaluation of the determining factors, as described in the article, for the correction of facial asymmetry with surgery-first, aid in categorising facial asymmetry cases that require minimal pre-surgical orthodontics or without pre-surgical orthodontic treatment, thereby defining the limits of surgery-first.

Augmented corticotomy-assisted presurgical orthodontic treatment to prevent alveolar bone loss in patients with skeletal Class III malocclusion

The objective of this study was to explore the effect of augmented corticotomy (AC) on anterior alveolar bone morphology in presurgical orthodontic treatment for skeletal Class III malocclusion. Thirty-six surgical patients with skeletal Class III malocclusion with high-angle were included: 18 (AC group) accepted AC surgery during presurgical orthodontic treatment, and 18 (control group) accepted traditional presurgical orthodontic treatment. Cone-beam computed tomography scans were obtained before treatment (T0) and after presurgical orthodontic treatment (T1). The alveolar bone morphology, root length, dehiscence, and movement of mandibular central incisors were measured by cone-beam computed tomography using Dolphin software. Statistical analyses were performed with independent-sample t tests, paired t tests, and multiple linear regression. After presurgical orthodontic treatment, the whole alveolar bone thickness at each level, alveolar bone area, and alveolar bone height decreased significantly in the control group but increased or remained unchanged in the AC group. In the AC group, the lower the labial alveolar bone height at T0 was, the greater the increase after T1; the change in alveolar bone thickness was related to ΔL1-MP and sex. At T0, the incidences of dehiscence were similar in the 2 groups, ranging from 11.11% to 16.67%. At T1, the labial and lingual incidences of dehiscence in the AC group were 0% and 27.78%, compared with 55.56% and 66.67% in the control group. During presurgical orthodontic treatment, AC is effective in preventing alveolar bone resorption and dehiscence without additional root resorption. AC can be recommended for high-angle skeletal Class III patients with thin alveolar bone around anterior teeth during presurgical orthodontic treatment.

The Prediction Accuracy of Digital Orthodontic Setups for the Orthodontic Phase before Orthognathic Surgery.

The purpose of this study was to verify whether pre-treatment digital setups can accurately predict the tooth positions after presurgical orthodontic treatment has been performed in a 3-dimensional way. Twenty-six patients who underwent a combined orthodontic-orthognathic surgical treatment were included. Pre-treatment digital dental models were merged with cone beam computed tomography (CBCT) scans. One operator fabricated virtual setups to simulate the tooth movements of the presurgical orthodontic treatment. Prior to surgery, digital dental models were merged with the CBCT scans. Differences between de virtual setups and the presurgical dental models were calculated using linear mixed model analyses. Differences in tooth displacements exceeding the boundaries of clinical acceptance (>2 degrees for rotations and >0.6 mm for translations) were found in 75% of the rotational and 52% of translational mean differences in the maxilla and in 74% of the rotational mean differences and 44% of the translational mean differences in the mandible. Significant differences were found for all tooth types and in all tooth displacement directions with significant effects of extractions and surgically assisted rapid maxillary expansion (SARME) procedures. The accuracy of the digital setup is still too limited to correctly simulate the presurgical orthodontic treatment.

Management of impacted maxillary canine with surgical exposure and alignment by orthodontic treatment

Background: Maxillary canines play a critical point in creating an aesthetic smile as they support the part of facial muscle. Canines are also the second most frequently impacted teeth after the third molars. In some cases, it is possible to retract canines into their correct position by orthodontics treatment. Purpose: This article highlighted a treatment option with surgical exposure, in which a maxillary canine was impacted. It presented gradual steps from pre-surgical to post-surgical orthodontic treatment. Case: A 16 years old female patient referred to Orthodontic Department by Oral Surgeon for pre-surgical orthodontic treatment of her impacted maxillary canine. Case Management: After pre-surgical orthodontic treatment, the impacted canine was surgically exposed by closed technique since open surgical exposure might need excessive removal of the surrounding bone. Traction was given through a gold chain which attached to the palatal surface of the impacted canine. The tooth was ideally positioned with fixed orthodontic appliances. The permanent right maxillary canine was successfully positioned into proper alignment with the remaining teeth. Aesthetic smile was improved. Conclusion: Malocclusion with impacted canine was successfully treated with MBT orthodontic prescription combined with gold chain that can retract the impacted canine into its physiological position and the patient was satisfied with the aesthetic result.

Surgical Orthodontic Treatment of Class II Malocclusion with Facial Asymmetry

This case report describes a successful surgical orthodontic treatment of a Class II malocclusion with facial asymmetry. An 18-year-old female visited our dental clinic due to proclined anterior teeth and facial asymmetry. Straight facial profile and skeletal Class II was observed. The frontal cephalometric analysis showed that the left ramus length was longer and the left ramal angle was greater than the right. After extraction of the maxillary and mandibular second premolars, dental arch was decompensated. After presurgical orthodontic treatment, bilateral sagittal split ramus osteotomy (BSSRO) was performed. Facial asymmetry was improved, but posterior open bite on the right was occurred by insufficient dental decompensation. To prevent recurrence of the mandible, a bite stop was made by bonding resin on the lingual side of the right maxillary canine. This prevented the recurrence of the mandibular rolling and yawing with the use of bilateral intermaxillary elastics. The right mandibular posterior part with open bite was segmented from the main arch wire and was extruded with intermaxillary elastic. Fast occlusal stabilization was achieved by using the rapid tooth movement after surgery. Since intermaxillary elastic was used while applying an intrusion force with a micro-implant to the left posterior region, it was possible to stabilize the mandible while prevent tooth extrusion. After treatment, facial symmetry and good occlusal relationship were achieved.