Pressure System Research Articles

Filters comprised of sand and Zero Valent Iron hold promise as tools to mitigate risk posed by Cyclospora cayetanensis oocysts

Irrigation water contaminated by human fecal material may elevate the risk of produce contamination with the enteric parasite Cyclospora cayetanensis. Oocysts of C. cayetanensis are resistant to commonly used disinfectants and a method of removing C. cayetanensis from irrigation water would mitigate this risk. We evaluated zero valent iron (ZVI) sand filtration as one such method. We sought to determine if sand filters containing ZVI outperformed those without ZVI. We first evaluated the abundant poultry parasites Eimeria maxima, E. tenella and E. acervulina as surrogates for C. cayetanensis. We determined if a miniaturized gravity fed ZVI-sand filter, scaled to evaluate scarce supplies of C. cayetanensis oocysts, provided useful information about the performance of larger filtration systems. Filters were inoculated with oocysts, rinsed, and the resulting filtrate examined microscopically for oocysts. We performed experiments to measure the effect of varying ZVI concentrations, repeated filter use, simulated agricultural water, and oocyst size and condition. We then compared the performance of mini filters to that of larger, gravity-fed pool filters and found that ZVI-sand filtration was far more effective at removing Eimeria spp. from water when compared to sand filtration, at both scales. Sand mini filters retained 13–54 % of E. acervulina oocysts, and pool filters retained 82 %, but when combined with 50 % (mini filter) or 35 % (pool filter) v/v ZVI, mini filters retained 89–99 % of oocysts and pool filters retained >99 %. The effectiveness of the mini filters increased with increasing ZVI concentration, and the addition of ZVI far outweighed the influence of any other measured variable. We then performed experiments including C. cayetanensis, which provided similar results to those utilizing Eimeria; 59 % of inoculated C. cayetanensis oocysts were retained in sand mini filters, and 97 % in mini filters composed of 35 % v/v ZVI. In sum, ZVI is highly effective in removing oocysts from water and Eimeria is a useful surrogate for C. cayetanensis to assess filtration. ZVI-sand filtration shows promise as a tool to mitigate the risk of C. cayetanensis contamination of irrigation water. Further studies should evaluate the performance of ZVI-sand in pressurized fast filtration systems under a range of field conditions.

Automated operational forecasting of monsoon low pressure systems

Automated operational forecasting of monsoon low pressure systems

The cause of an extreme sea surface warming in the midlatitude western North Pacific during 2012 summer

This study investigated an extreme sea surface warming in the midlatitude western North Pacific (MLWNP) during the summer of 2012. The 2012 extreme event was characterized by warm sea surface temperature anomaly (SSTA) extending from the East/Japan Sea to central North Pacific. The SSTA box–averaged over the MLWNP (130–180°E, 33–50°N) in 2012 ranked as the third warmest in recent four decades, which has caused intense marine heatwaves in this region. During the summer of 2012, a positive Indian Ocean Dipole event co-occurred with El Niño, favoring anomalous moisture transport between the two basins that caused enhanced convection in the South China and Philippine Seas and western–to–central subtropical Pacific. The enhanced convective activities triggered two meridional atmospheric Rossby wave trains to form strong atmospheric blocking high–pressure systems in the MLWNP. This reduced the total cloud cover and surface wind speed, enhancing insolation and reducing the release of latent heat flux. In addition, the weakened wind strengthened the stratification and shoaled the mixed layer. As a result, the increased net heat flux into the ocean accompanied by a shallower mixed layer contributed to the upper ocean warming in the MLWNP. Meanwhile, the North Pacific was dominated by a negative phase of Pacific Decadal Oscillation (PDO), significantly contributing to warm SSTAs in the MLWNP in 2012. Consequently, the 2012 extreme warming in the MLWNP was the results of the combination of atmospheric Rossby waves and PDO. Our study highlighted the roles of high–frequency atmospheric teleconnection and low–frequency PDO in extreme sea surface warming in the MLWNP.

Impact of Metal Ions, Peroxymonosulfate (PMS), and pH on Sulfolane Degradation by Pressurized Ozonation

This study investigated the degradation of sulfolane using pressurized ozonation under varying initial concentrations and the influence of different catalysts and peroxymonosulfate activation methods on the degradation efficiency. Initial sulfolane concentrations of 1 mg L−1, 20 mg L−1, and 100 mg L−1 were tested over 120 min, revealing a degradation efficiency of 73%, 41%, and 18%, respectively. The addition of various metal ions (Zn2+, Mg2+, Cu2+, Ni2+, and Co2+) demonstrated that only zinc and magnesium enhanced degradation, with zinc achieving a 92% removal efficiency and magnesium achieving 86%. Different doses of magnesium and zinc were further tested, showing optimal degradation at specific concentrations. The combination of PMS with ozonation was explored, revealing that zinc activation did not significantly enhance degradation, while NaOH activation achieved near-total degradation, with a 100 mg L−1 NaOH concentration. Varying PMS concentrations indicated that altering pH was more effective than changing PMS dosage. Finally, the impact of pH changes in both reverse osmosis water and tap water matrices confirmed that higher pH levels significantly improved degradation efficacy, achieving up to 98% removal with NaOH concentrations of 50 mg L−1 in reverse osmosis water. These results suggest that optimizing pH and catalyst type are critical for enhancing sulfolane degradation in pressurized ozonation systems.

Pressurization System under Various Operating Conditions for Smoke Control

The importance of smoke control systems has been emphasized for a safe evacuation and efficient firefighting activities during fire situations. To protect stairwells from smoke hazards, ‘Design Guide for Smoke Control System of Special Evacuation Stairwell and Lobby (NFPC501A)’ has been presented. In domestic area, pressurization systems utilize an air supply system consisting of fans, ducts, and dampers for supplying the outdoor air to the lobbies . For a 10-story model building, the design of the pressurization system must consider the leakage/supply flow rate, pressure loss, and fan performance. In this study, the flow field of the pressurization system under various operating conditions was analyzed using CONTAM network model.

Experimental Study on the Analysis of Leakage in Aged Fire Doors

Aged fire doors may develop leakage cracks owing to damage from long-term use, leading to issues such as declines in the functionality of pressurization systems. This study analyzes the trends of leakage cracks in aged fire doors based on existing research and field surveys and derives the differential pressure and leakage amounts corresponding to each leakage crack via experiments conducted in a full-scale ancillary room. The results indicate that an increase in the number of leakage cracks tends to result in a decrease in the design differential pressure, which thereby prevents the fire door from performing its intended functions. Moreover, the results confirm that an increase in the number of leakage cracks also affects the leakage amounts.

Design and fabrication of ultrathin silicon-based strain gauges for piezoresistive pressure sensor

Ultra-thin (20 μm) silicon strain gauges were fabricated with silicon-on-insulator (SOI) wafer by a newly-conceived wet etching process. Buffered oxide etchant (BOE, NH4F: HF = 6:1) solution with additives of octylamine and octanol was used for wet etching process in which the operating temperature was 50°C. Photoresist as a passivation layer was deposited on the upper side of SOI wafer to minimize strain gauge damage by chemical etchants. Small amount of octylamine and octanol were added to BOE solution to improve surface wettability and SiO2/Si selectivity. The fabricated strain gauges were attached to the pressure diaphragm and the performance of strain gauge was investigated by measuring with the hydraulic pressure system. The resistance changed linearly with tensile and compressive strains. Maximum values of non-linearity, hysteresis, thermal coefficient of resistance (TCR) and sensitivity were -0.341 %, 0.909 %, 4128 ppm/°C and 34.22 mV/V respectively. The fabricated strain gauges might be well applicable to the hydrogen pressure sensor which is detectable for high pressure range (0–900 bar).

Marine heatwaves suppress ocean circulation and large vortices in the Gulf of Alaska

Large-scale anticyclonic vortices forming along the Gulf of Alaska continental slope serve as fertile ecosystems for marine life, significantly shaping the distribution of primary productivity, with 40–80% of the gulf’s open ocean surface chlorophyll-a concentrated in their cores. Between 2013 and 2023, Alaska experienced some of the largest and longest marine heatwaves ever recorded in the world’s oceans, persistently altering its ecosystem and fisheries. Here, using 30 years of satellite and reanalysis data, we find that the coastal upwelling atmospheric forcing conditions associated with the heatwaves have also significantly suppressed the Gulf of Alaska’s ocean circulation and the formation of large anticyclones. Climate model simulations spanning from 1850 to 2100 suggest that future changes in the Aleutian Low pressure system will lead to a 60% increase in upwelling extremes (>2 standard deviations), further weakening the ocean anticyclones. However, large uncertainties remain in the mechanisms controlling the Aleutian Low’s response to climate forcing in the models.

Recent trends in extratropical lows and their rainfall over Australia

Low pressure systems are an important source of rainfall in southern Australia, particularly deep lows that extend from the surface to at least 500 hPa. This paper uses multiple reanalyses to assess long-term trends in lows over the period 1959–2023, and identifies statistically significant decreasing trends in the number of surface low pressure systems near southern Australia during May–October, linked to a decrease in cyclogenesis near south-western Western Australia. Trends in lows at 500 hPa are also negative but weaker than at the surface, and are less consistent between reanalyses owing to less consistent observations through time. The spatial pattern of observed declines during the cool season is consistent with trends using eight CMIP6 models, but global climate models systematically underestimate the magnitude of the observed decline in surface lows. Trends in rainfall associated with lows are also shown, including assessing the sensitivity of trends to the specific years used. Despite well above average numbers of lows and enhanced rainfall during recent La Niña years 2020–2022, total rainfall from low pressure systems is declining during the cool season in south-east Australia. Trends in rainfall from lows are largest on the east coast, where they explain more than 70% of observed rainfall changes since the 1960s.

Assessment of Intrarenal Pressure through Dilatation State of the Renal Collecting System

Introduction: The aim of the study was to explore the relationship between the dilation states of the renal collecting system in flexible ureteroscopy (f-URS) view and intrarenal pressure (IRP). Methods: Fifteen porcine kidneys were randomly selected and numbered 1 through 15. Pressure transducers were inserted into the renal calyx via puncture and adjusted to a zero position. The distal end of the f-URS probe was placed within the renal pelvis. Perfusion rates of 50 mL/min, 80 mL/min, and 100 mL/min were utilized. We observed the relationship between the dilation state of the renal collecting system and changes in IRP. The state of complete dilation was defined as an unchanging spatial morphology of the renal collecting system as visualized during f-URS. Results: With irrigation rates of 50 mL/min, 80 mL/min, and 100 mL/min, IRP values at the moment of complete dilation of the renal collecting system ranged from 16 to 18 cm H2O, 16–19 cm H2O, and 16–19 cm H2O, respectively. Maximum IRPs ranged from 47 to 49 cm H2O, 82–85 cm H2O, and 97–100 cm H2O, respectively. Prior to complete dilation of the renal collecting system, IRP consistently remained below 20 cm H2O. However, following full dilation of the renal collecting system, IRP rose rapidly and rapidly surpassed 20 cm H2O. Despite sustained elevations in IRP following full dilation, no significant alterations in the renal collecting system dilated morphological were observed with f-URS. Conclusions: In vitro experiments indicate that when the renal collecting system is not fully dilated, the IRP is consistently less than 20 cm H2O. Evaluation of IRP being within a safe range can be determined by assessing the dilation status of the renal collecting system.

Implementation of a novel bubble continuous positive airway pressure system with a blender in preterm infants in a low resource setting.

To determine if a novel CPAP system is associated with physiologic improvement in premature infants in a low resource setting and if the introduction of blended oxygen would reduce FiO2. Feasibility study of infants ≤2000 g or ≤32 weeks gestational age with early respiratory distress who were placed on Vayu CPAP with continuous pulse oximetry. Physiologic parameters were recorded prior to initiation and through the first 24 h. Seventy-six infants of birthweight 1360 ± 324 g and gestational age 31.2 ± 2.5 weeks were included. Compared to baseline, heart rate, respiratory rate, FiO2, and Silverman Anderson score significantly decreased while oxygen saturations significantly increased at one hour with persistence through 24 h. Utilization of Vayu CPAP in premature infants with respiratory distress was associated with immediate improvement in physiologic parameters. Use of blended oxygen coupled with pulse oximetry facilitates reduction in delivered oxygen.

Hydrogel Sensors in an IoT System for Self-Monitoring and Remote Monitoring of Massage Pressure.

The effectiveness of massage can be enhanced if the pressure applied can be monitored continuously. In this study, we described an Internet-of-Things (IoT) system based on hydrogel sensors, which allows for self-monitoring and remote monitoring of massage pressure. The piezoresistive hydrogel with the compressive energy loss coefficient of 15.7% was developed, which was attributed to the strong polarization of ammonium phosphate on water molecules, which was evidenced by nuclear magnetic resonance (NMR) transverse relaxation analyses and atomic force microscopy. Using this hydrogel as a pressure-sensing component, we assembled a wearable sensor capable of quantifying and transmitting massage pressure with insignificant energy dissipation. By integrating RGB LED arrays, the message pressure was indicated by the color states of the LEDs. Furthermore, the wearable sensors and LEDs were connected to a microcontroller (MCU) chip, an IoT chip, and a cloud server to form a sensing-controlled IoT system, enabling visible and remote monitoring of massage pressure.

Assessment and forecasting of water ecological security and obstacle factor diagnosis in the Hexi Corridor of Northwest China

The water ecological security pattern is a core factor. A scientific, accurate, and practical evaluation of water ecological security provides a theoretical basis for regional water ecological management. Using water resource data from five cities in the Hexi Corridor of Gansu Province (Jiuquan (JQ), Jiayuguan (JYG), Zhangye (ZY), Jinchang (JC), and Wuwei (WW)) from 2006 to 2021, a water ecological security evaluation index system based on the PSR (pressure-state-response) framework was constructed, covering 27 factors related to water resources, socio-economics, and the ecological environment. The main obstacle factors of water ecological security were identified using the obstacle degree model, and the grey GM(1,1) model was employed to predict water ecological security. Results indicated that the comprehensive assessment index of water ecology in the Hexi Corridor increased from 2006 to 2021, showing a transition from relatively unsafe (0.319) to basic safety and then to relatively safe (0.672). The pressure and response systems were the main limiting factors affecting water ecological security in the Hexi Corridor. After a slight decline in 2008, the overall spatial distribution continued to rise, with WW City and ZY City leading since 2016. ZY had a higher safety grade proportion (25%) compared to other areas in the Hexi region. The pressure system was the most significant obstacle to water ecological security after 2006. Prediction results indicated that the comprehensive evaluation index of water ecological security would continue to rise annually from 2022 to 2031, reaching a very safe level by 2025. The evaluation results provide a scientific basis for ecological security and risk decision-making in the study area.

Influence of the equation of state for moderate to high pressure gaseous systems

For transportation and defense systems, equations of state describe the thermodynamical behavior of gases, as a function of pressure, density, and temperature and are often used to close systems of equation (such as Navier–Stokes for fluid mechanics). For low pressure system (under a few dozen MPa), the ideal gas equation can be used, whereas for high pressure system (above 1000 MPa), dedicated equations of state are used (Jones-Wilkins-Lee: JWL or Becker-Kistiakowsky-Wilson: BKW). For intermediate pressure systems, such as interior ballistics or pyromechanisms, where the pressure is around a few hundreds MPa and many phenomena interact closely and simultaneously (multiphysics system: combustion, fluid dynamics, thermics, fluid-structure interaction, thermodynamics…), the ideal gas equation is not valid anymore and nor are the JWL or BKW equations. A dedicated equation of state is then necessary for intermediate level of pressures, and its choice is not obvious. This paper presents a comparison of equations of state for this range of pressure (Noble-Abel, Van der Waals, virial), details the calculations of the involved coefficients and their effects on uncertainties, and studies the influence of the equation of state on the predictions of pressure, density, pressure coefficient, and heat transfer, with both analytical and numerical approach. The results highlight the importance of the choice of the equation of state, especially for a multiphysics system, as the equation of state influences not only thermodynamical properties (pressure, density, temperature) but also thermical properties of a system, such as heat transfer.

Effects of tidal bore on hydraulic transients in low-head pressurized water conveyance systems

Effects of tidal bore on hydraulic transients in low-head pressurized water conveyance systems

A wearable, self-sustainable, and wireless plantar pressure and temperature monitoring system for foot ulceration prognosis and rehabilitation

Continuous foot temperature and pressure monitoring are desirable for prevention and care of foot health conditions such as Diabetic foot ulceration (DFU). However, monitoring these parameters simultaneously is complex, and mostly rely on sensors with undisrupted power supply integration. Herein, we propose high-performance self-sustainable smart footwear capable of monitoring foot pressure and temperature at various locations for real-time applications. The footwear consists of three modules of an integrated electromagnetic generator (EMG) and triboelectric (TENG) self-powered pressure sensors operated by very elastic 3D printed thermoplastic polyurethane (TPU) springs formed by stacking circular plates that allow TENG pressure sensors to be embedded within. Additionally, Laser-induced graphene (LIG) temperature sensors are used for monitoring foot temperature. The embedded EMG can deliver high output power during various activities: walking (38 mW), running (154 mW), and jumping (75 mW), sufficient to power signal processing and transmission circuitries for wireless monitoring of foot temperature and pressure. TENG-based pressure sensors and LIG temperature sensors (LTS) embedded in this design allow mapping of foot pressure (0.2 V/kPa at 1 Hz) and foot temperature (0.55 Ω °C−1) continuously. Finally, footwear was assembled successfully to demonstrate wireless self-sustainable multisensory smart footwear for monitoring foot pressure and temperature to prevent and rehabilitate diabetic foot ulcers.

Regime-Dependent Characteristics and Predictability of Cold-Season Precipitation Events in the St. Lawrence River Valley

Abstract The St. Lawrence River Valley experiences a variety of precipitation types (p-types) during the cold season, such as rain, freezing rain, ice pellets, and snow. These varied precipitation types exert considerable impacts on aviation, road transportation, power generation and distribution, and winter recreation and are shaped by diverse multiscale processes that interact with the region’s complex topography. This study utilizes ERA5 reanalysis data, surface cyclone climatology, and hourly station observations from Montréal, Québec, and Burlington, Vermont, during October–April 2000–18 to investigate the spectrum of synoptic-scale weather regimes that induce cold-season precipitation across the St. Lawrence River Valley. In particular, k-means clustering and self-organizing maps (SOMs) are used to classify cyclone tracks passing near the St. Lawrence River Valley, and their accompanying thermodynamic profiles, into a set of event types that include a U.S. East Coast track, a central U.S. track, and two Canadian clipper tracks. Composite analyses are subsequently performed to reveal the synoptic-scale environments and the characteristic p-types that most frequently accompany each event type. Global Ensemble Forecast System version 12 (GEFSv12) reforecasts are then used to examine the relative predictability of cyclone characteristics and the local thermodynamic profile associated with each event type at 0–5-day forecast lead times. The analysis suggests that forecasted cyclones near the St. Lawrence River Valley develop too quickly and are located left-of-track relative to the reanalysis on average, which has implications for forecasts of the local thermodynamic profile and p-type across the region when the temperature is near 0°C. Significance Statement Diverse precipitation types are observed when near-surface temperatures approach 0°C during the cold season, especially across the St. Lawrence River Valley in southern Québec. This study classifies cold-season precipitation events impacting the St. Lawrence River Valley based on the track of storm systems across the region and quantifies the average meteorological characteristics and predictability of each track. Our analysis reveals that forecasted low pressure systems develop too quickly and are left of their observed track 0–5 days prior to an event on average, which has implications for forecasted temperatures and the type of precipitation observed across the region. Our results can inform future operational forecasts of cold-season precipitation events by providing a storm-focused perspective on forecast errors during these impactful events.

Influence of Outsole Structures on Foot Loading and Gait Stability

As the downstream products most relevant to the leather industry, leather shoes perform well in the global market. Consumers have put forward high requirements for the comfort and safety of leather shoes in recent years, especially for high heels, whose unique outsole structure often causes foot overloading. The outsole structure varies in ground-contacted mode and heel base size, and plays a decisive role in its function, affecting gait patterns. This study aimed to investigate differences in foot loading and gait stability induced by different outsole structures, at two typical heel heights. Six pairs of customized high heels (3 outsole structures × 2 heel heights) were tested on eighteen healthy females while walking by the Novel Pedar-X in-shoe plantar pressure system. Taking the thick high heels for the intermediate control group, the main effects of the outsole structures and the heel heights, and their interactions on the plantar pressures were analyzed by Two-way repeated ANOVAs. The center of pressure displacements and velocities were calculated throughout the whole stance phase. The results indicated that the whole ground-contacted mode of the outsole displayed better stability in the medial-lateral direction in the early stance phase but may increase the risk of hallux valgus because of the elevated load there. On the contrary, the smaller heel base size exhibited poorer stability in the medial-lateral direction in the early stance phase and would increase forefoot loading. The response of gait characteristics to heel height change is more prominent, which could cause a more vulnerable gait posture. The results could be relevant to improving high-heel functional design, positively motivating the transformation and upgrading of the leather shoe industry.

Evaluating Ensemble Predictions of South Asian Monsoon Low Pressure System Genesis

Abstract Synoptic-scale vortices known as monsoon low pressure systems (LPSs) frequently produce intense precipitation and hydrological disasters in South Asia, so accurately forecasting LPS genesis is crucial for improving disaster preparedness and response. However, the accuracy of LPS genesis forecasts by numerical weather prediction models has remained unknown. Here, we evaluate the performance of two global ensemble models—the U.S. Global Ensemble Forecast System (GEFS) and the Ensemble Prediction System of the European Centre for Medium-Range Weather Forecasts (ECMWF)—in predicting LPS genesis during the years 2021–22. The GEFS successfully predicted about half the observed LPS genesis events 1–2 days in advance; the ECMWF model captured an additional 10% of observed genesis events. Both models had a false alarm ratio (FAR) of around 50% for 1–2-day lead times. In both ensembles, the control run typically exhibited a higher probability of detection (POD) of observed events and a lower FAR compared to the perturbed ensemble members. However, a consensus forecast, in which genesis is predicted when at least 20% of ensemble members forecast LPS formation, had POD values surpassing those of the control run for all lead times. Moreover, probabilistic predictions of genesis over the Bay of Bengal, where most LPSs form, were skillful, with the fraction of ensemble members predicting LPS formation over a 5-day lead time approximating the observed frequency of genesis, without any adjustment or bias correction.

Process-Oriented Compound Long-Duration Dry and Hot Events in China: Atmospheric Conditions, Moisture, and Heat Budget Analyses

Abstract Summertime compound dry and hot events pose severe threats to agricultural production and human health, especially those with a long duration. Considering the joint evolution of such hazards in space and time, spatiotemporal compound long-duration dry and hot (SLDDH) events in China during 1961–2022 are identified with a process-oriented method. Here, we investigate the associated large-scale atmospheric circulation patterns and the physical processes causing their precipitation and temperature anomalies. In all regions of China, this persistent dry–hot compound extreme is accompanied by anomalous high pressure systems along with enhanced descending motion, increased net surface solar radiation, and decreased water vapor flux convergence. Moisture budget diagnosis shows that precipitation deficits during the SLDDH events are produced primarily by the suppressed vertical moisture advection associated with the dynamical contribution of anomalous subsidence, while the thermodynamic process due to the anomaly in atmospheric moisture content makes a small contribution. Horizontal temperature advection generally plays a negative role in sustaining SLDDH events, while it helps trigger the events in North China. In most regions, adiabatic warming due to abnormal subsidence plays a dominant role in determining the near-surface high temperatures during the long-lasting warm and dry periods, whereas diabatic heating has a cooling or small effect therein. However, in some northern areas such as North China and northern Xinjiang, hot extremes during SLDDH events arise from a combination of diabatic heating and adiabatic warming. This study thus quantifies and reveals the crucial factors leading to the severity of compound dry and hot events.