Presence Of Modified Montmorillonite Research Articles

Properties of recycled polycaprolactone‐based thermoplastic polyurethane filled with montmorillonites

AbstractThe properties of recycled low temperature biodegradable polycaprolactone‐based thermoplastic polyurethane (rTPU), filled with different types of organically modified montmorillonite (MMT) prepared by two‐roll milling, were studied. The dependence of rTPU properties on the mastication time and clays content was determined by various structural and physical testing methods. Results show that the melt flow and mechanical properties of rTPU deteriorate with increasing of mastication time, but thermal properties were affected only slightly. rTPU/MMT composites show exfoliated or intercalated structures depending on the nature of organic modifier of clay. MMT reduces slightly rTPU tensile and melt flow properties, but accelerates hydrolytic degradation process. During degradation the weight loss and polydispersity increase significantly in the presence of MMT, but it does not accelerate crystallinity changes. The degradation of rTPU composites with higher hydrophilicity organoclays proceeds faster than that with hydrophobic ones due to the relatively higher interaction with polymer matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

Hybrid Nanocomposites: Advanced Nonlinear Method for Calculating Key Kinetic Parameters of Complex Cure Kinetics

Complex cure kinetics involved in the elaboration of organic/inorganic hybrid silicate nanocomposites based on diglycidyl ether of bisphenol A (DGEBA), 1,3-phenylenediamine (m-PDA), and modified montmorillonite (MMTm) clay have been studied. An advanced isoconversional method has been applied to nonisothermal data in order to evaluate cure kinetic parameters. A new method based on nonlinear optimization was proposed to compute nonisothermal kinetic parameters avoiding complex optimization techniques. The objective is to obtain kinetic parameters rather than modeling values in order to give more insight into the elucidation of complex cure mechanisms. Key kinetic parameters of cure have been computed according to this method. It appears that the reaction mechanism changes if MMTm is added to the curing system. The results reveal an increase of the efficiency of collisions in presence of MMTm at the beginning of the cure and an increase of the frequency of diffusion jumps at the later stage of the reaction.