Precambrian Basins Research Articles

Dating fluid flow and Mississippi Valley type base-metal mineralization in the Paleoproterozoic Earaheedy Basin, Western Australia

The ages of deposition and metamorphism of low-grade Precambrian metasedimentary sequences can be difficult to define in the absence of interlayered volcanogenic rocks. Monazite and xenotime can grow at temperatures below 400°C and can give vital evidence for the timing of diagenesis, hydrothermal fluid flow, and low-grade deformation and metamorphism in Precambrian basins. The histories of sedimentary basins in the eastern Capricorn Orogen of the West Australian Craton are generally poorly constrained. However, sandstones and siltstones of the basal Yelma Formation in the Earaheedy Basin contain authigenic monazite and xenotime associated with sulphide minerals related to Mississippi Valley Type base-metal mineralization hosted within carbonate of the overlying Sweetwaters Well Member. In the Teague area, within the Earaheedy Basin, siliciclastic rocks overlying granites of the Yilgarn Craton contain authigenic monazite that gives an in situ SHRIMP 207Pb/206Pb age of 1811±13Ma. Monazite in weathered sandstones and siltstones of the Cano secondary Pb deposit on Magellan Hill, overlying the Yerrida Basin, gives an indistinguishable age of 1815±13Ma. The Cano monazite is interpreted to have been intergrown with primary sulphide minerals and therefore to record the age of mineralization. Xenotime outgrowths on detrital zircons from Cano have high common Pb but define an isochron with an age of 1832±36Ma. The isochron is co-linear with Pb isotope ratios from Pb ore at Magellan, suggesting that xenotime growth is also related to mineralization. The timing of fluid flow is synchronous with the 1820–1770Ma Capricorn Orogeny, and is the first evidence for activity of this age in the eastern part of the Capricorn Orogen. The age of mineralization provides a firm minimum age for the Yelma Formation, and constrains its deposition to between ∼2.0Ga, the youngest age of detrital zircons, and the mineralization age.

Sequence stratigraphy of the Precambrian

The method of sequence stratigraphy requires the application of the same workflow and principles irrespective of the age of strata under analysis. In that respect, its application to Precambrian successions is similar to the approach used for Phanerozoic case studies. Differences, however, are recorded in terms of the preservation potential and the amount of data available for analysis; the rates and intensities of the allogenic controls on sedimentation; the environmental conditions and related physical processes; and the evolution of competing groups of organisms and associated biogenic processes. The combined effect of these contrasting aspects accounts for differences in the architecture of depositional sequences, particularly with respect to the relative contributions of various systems tracts to the makeup of a sequence. The application of sequence stratigraphy to Precambrian basins has considerably enlarged the perspective on the fundamental principles governing the processes of sedimentary basin formation and the mechanisms controlling stratigraphic cyclicity in the rock record. These first-order principles are perhaps the most important contribution of Precambrian research to sequence stratigraphy. At the broader scale of Earth's geological history, the tectonic regimes governing the formation and evolution of sedimentary basins are shown to have been much more erratic in terms of nature and rates than originally inferred solely from the study of the Phanerozoic record. This provides important clues with respect to the criteria that should be involved in the hierarchy system of classification of stratigraphic sequences and bounding surfaces.

Fluids, basin analysis, and mineral deposits

AbstractSedimentary basins are the largest structures on the surface of our planet and the most significant sources of energy‐related commodities. With time, sedimentary successions in basins normally are subjected to increasingly intense diagenesis that results in differential evolution of basin hydrology. This hydrologic structure is in turn vitally important in determining how and where deposition of metals may occur. Fluids in all basins originate and flow as a result of sedimentological and tectonic events, so that fluid histories should reflect the control of both lithology and tectonism on ore deposition. Sandstone lithologies, in particular, reflect fluid‐flow events because they are normally the major aquifers in basins. However, early cementation results in occlusion of primary permeability in some facies (diagenetic aquitards) whereas in others, permeability develops due to the dissolution of unstable grains (diagenetic aquifers). Particularly for ore deposits in Precambrian basins, identification of paleohydrologic systems during basin evolution requires the integration of data derived from tectonics, sedimentology, stratigraphy, diagenesis, geochemistry and geology. Assessment of all these data is a prerequisite for the ‘holistic basin analysis’ needed to guide the search for basin‐hosted ores.Recent results from the Paleoproterozoic Mt Isa and McArthur basins in northern Australia serve as a template for exploring for mineral deposits in basins. Basinal fluids were saline, 200–300°C and evolved primarily from meteoric water in the Mt Isa Basin and from seawater in the McArthur Basin during burial to depths of 4–12 km. The δDfluid and δ18Ofluid values in these brines were isotopically identical to those in the Zn‐Pb, Cu and U deposits. Geochemical changes of various lithologies during alteration support detrital minerals as the major source of the U, and volcanic units proximal to diagenetic aquifers as a source for the transition metals. Ages of diagenetic phases extracted from aquifer lithologies reveal that fluid migration from the diagenetic aquifers effectively covers the period of formation for U, Zn‐Pb and Cu mineralization, and that the deposits formed in response to tectonic events reflected in the apparent polar wandering path for the area. Sequence stratigraphic analysis and models of fluid flow also indicate that basinal reservoirs were likely sources for the mineralizing fluids. Thus, diagenetic aquifer lithologies were being drained of fluids at the same time as the deposits were forming from fluids that were chemically and isotopically similar, linking diagenesis and fluid events within the basin to the formation of the deposits.

The content of gold in Vendian-Cambrian phosphorite concretions from the East European Platform

High Au contents in phosphorite concretions and Vendian-Cambrian enclosing shales are attributed to the concentration function of microbial biota of Precambrian epiplatformal basins. Microorganisms and organic detritus served as intermediate collectors of gold delivered with the continental runoff from provenances of the East European Platform.

Patterns of sedimentation in the Precambrian

The principle of uniformitarianism may be applied to Precambrian basin evolution and to the sedimentary record as a whole. The major difference in the Precambrian Eon lay in variability of rates and intensities of processes controlling weathering, erosion, transport, deposition, lithification, and diagenesis. This paper examines Precambrian sedimentation patterns within the larger framework of Earth evolution. Pre-rock record sedimentation probably comprised deep water oceanic realms within which meteoritic and cometary impact events generated very large tsunamis, resulting in very coarse volcaniclastic detritus combined with fine dust settling out of suspension, all reworked by marine current systems and localised turbidites. From c. 4 to 3.2 Ga, greenstone belts provided the predominant settings for the thin passive margin carbonates, BIF, stromatolitic evaporites, pelites and quartzites, and lesser synorogenic turbidites, conglomerates, and sandstones that accompanied the volcanic and volcaniclastic rocks typical of these settings. Common palaeoenvironments were high gradient alluvial fans, low sinuosity braided rivers, and relatively shallow marine settings, subject to wave and tidal action, and turbidity currents. Although continental crustal growth continued largely through greenstone belts until c. 2.7 Ga, the Witwatersrand basin (c. 3.0–2.7 Ga; Kaapvaal craton, South Africa) reflects initial stabilisation of the oldest craton, with an epeiric sea accumulating largely fluvial detritus subject to tidal (inland) and storm-wave (craton-marginal) reworking within a retroarc foreland basin setting. Neoarchaean–Palaeoproterozoic sedimentation is discussed within a framework of two global “superevents”, at c. 2.7 Ga and 2.2–1.8 Ga, each encompassing major changes in Earth's evolution related to the supercontinent cycle, mantle superplumes, peaks in crustal growth rates, and significant biochemical changes within the atmosphere–hydrosphere system. Concomitant globally raised sea levels led to chemical and clastic epeiric seas within which the first giant carbonate platforms developed, and deposition of iron-formation peaked globally at c. 2.5 Ga. The first global glaciation at c. 2.4–2.2 Ga provides little support for the “Snowball Earth” theory, but does suggest a negative feedback loop model whereby intraglacial CO 2-related warming and synglacial decreases in weathering alternated up to three times. Models for palaeo-atmospheric and -oceanic evolution are mutually exclusive, but by c.1.8 Ga, the existence of large landmasses and free oxygen in Earth's atmosphere enabled erg development and red bed sedimentation globally; the full spectrum of Phanerozoic–Modern sedimentary environments was thus present on Earth. A third postulated “superevent” at c. 0.8–0.6 Ga essentially recreated conditions experienced at c. 2.2–1.8 Ga, with, additionally, at least three global refrigeration events.

Controls on Precambrian sea level change and sedimentary cyclicity

Although uniformitarianism applies in a general sense to the controls on relative and global sea level change, some influences thereon were more prominent in the Precambrian. Short-term base level change due to waves and tides may have been enhanced due to possibly more uniform circulation systems on wide, low gradient Precambrian shelves. The lack of evidence for global glacial events in the Precambrian record implies that intraplate stresses and cyclic changes to Earth's geoid were more likely explanations for third-order sea level change than glacio-eustasy. Higher heat flow in the earlier Precambrian may have led to more rapid tectonic plate formation, transport and destruction, along with an increased role for hot spots, aseismic ridges and mantle plumes (superplumes), all of which may have influenced cyclic sedimentation within the ocean basins. A weak cyclicity in the occurrence of plume events has an approximate duration comparable to that of first-order (supercontinental cycle) sea level change. Second-order cyclicity in the Precambrian largely reflects the influences of thermal epeirogeny, changes to mid-ocean ridge volume as well as to ridge growth and decay rates, and cratonic marginal downwarping concomitant with either sediment loading or extensional tectonism. Third-order cycles of sea level change in the Precambrian also reflected cyclic loading/unloading within flexural foreland basin settings, and filling/deflation of magma chambers associated with island arc evolution. The relatively limited number of studies of Precambrian sequence stratigraphy allows some preliminary conclusions to be drawn on duration of the first three orders of cyclicity. Archaean greenstone basins appear to have had first- and second-order cycle durations analogous to Phanerozoic equivalents, supporting steady state tectonics throughout Earth history. In direct contrast, however, preserved basin-fills from Neoarchaean–Palaeoproterozoic cratonic terranes have first- and second-order cycles of considerably longer duration than Phanerozoic examples, supporting less evolved tectonism affecting cratonic plates. It is possible that oceanic tectonic realms underwent more rapid and dynamic plate movements and arc generation, whereas early continental cratonic plates offered more stable platforms and may have been subject to slower migration rates. The wide range of controls on Precambrian sea level change, allied to their apparent variability (in rates and periodicity) through Precambrian time supports the conclusion that each order of cyclicity is relative and must be defined within the stratigraphic context of each individual case study. This underlines the importance of establishing a hierarchical order of cyclicity in sequence stratigraphic interpretations of Precambrian basins based on the relative importance of sequences rather than their temporal duration.

Precambrian sequence stratigraphy

Sequence stratigraphy studies the change in depositional trends in response to the interplay of accommodation and sediment supply, from the scale of individual depositional systems to entire sedimentary basin-fills. As accommodation is controlled by allogenic mechanisms that operate at basinal to global scales, the change in depositional trends is commonly synchronized among all environments established within a basin, thus providing the basis for the definition of systems tracts and the development of models of facies predictability. All classical sequence stratigraphic models assume the presence of an interior seaway within the basin under analysis and are centered around the direction and types of shoreline shifts, which control the timing of all systems tracts and sequence stratigraphic surfaces. In overfilled basins, dominated by nonmarine sedimentation, the definition of systems tracts is based on changes in fluvial accommodation, as inferred from the shifting balance between the various fluvial architectural elements. The method of sequence stratigraphy requires the application of the same set of core principles irrespective of the age of strata under analysis, from Precambrian to Phanerozoic. The study of Precambrian basins is often hampered by poorer stratal preservation and by a general lack of time control. However, where sedimentary facies are well preserved, the lack of time control may be partially compensated by a good knowledge of facies architecture and relationships, as well as by paleocurrent data. The latter are particularly important to understand the stratigraphic record of tectonically active basins, where abrupt shifts in paleoflow directions allow one to infer tectonic events and map the corresponding sequence-bounding unconformities. Arguably the most important contribution of Precambrian research to sequence stratigraphy is the better understanding of the mechanisms controlling stratigraphic cyclicity in the rock record, and hence of the criteria that should be employed in a system of sequence stratigraphic hierarchy. There is increasing evidence that the tectonic regimes which controlled the formation and evolution of sedimentary basins in the more distant geological past were much more erratic in terms of origin and rates than formerly inferred solely from the study of the Phanerozoic record. In this context, time is largely irrelevant as a parameter in the classification of stratigraphic sequences, and it is rather the stratigraphic record of changes in the tectonic setting that provides the key criteria for the basic subdivision of the rock record into basin-fill successions separated by first-order sequence boundaries. These first-order basin-fill successions are in turn subdivided into second- and lower-order sequences that result from shifts in the balance between accommodation and sedimentation at various scales of observation, irrespective of the time span between two same-order consecutive events. Sequences identified in any particular basin are not expected to correlate to other first- and lower-order sequences of other basins that may be similar in age but may have different timing and duration.

Full Length Article

Recent advances in the field of geochronology have led to a greater understanding of the scale and duration of geological processes. It is currently possible to date igneous and metamorphic rocks by a variety of radiometric methods to within a million years, but establishing the depositional age of sedimentary rocks has remained exceedingly difficult. The problem is most pronounced for Precambrian rocks, where the low diversity and abundance of organisms have prevented the establishment of any meaningful biostratigraphic framework for correlating strata. Also, most Precambrian successions have been metamorphosed, rendering original minerals and textures difficult to interpret, and resetting diagenetic minerals. Xenotime (YPO4) is an isotopically robust chronometer, which is increasingly being recognized as a trace constituent in siliciclastic sedimentary rocks. It may start to grow during early diagenesis, typically forming syntaxial outgrowths on detrital zircon grains. Diagenetic xenotime occurs in a wide variety of rock types, including conglomerate, sandstone, siltstone, shale, phosphorite and volcaniclastic rocks, varying from early Archaean to Mesozoic in age. The formation of diagenetic xenotime is principally related to redox cycling of Fe-oxyhydroxides and microbial decomposition of organic matter, leading to elevated concentrations of dissolved phosphate and rare earth elements (REE) in sediment pore-waters. Xenotime has the properties of an ideal U–Pb chronometer, containing elevated levels of U (generally >1000 ppm) and very low concentrations of initial common Pb. In addition, it has an exceptional ability to remain closed to element mobility during later thermal events, and commonly yields concordant and precise dates. Because of the small size of diagenetic xenotime crystals and common textural complexities, an in situ isotopic technique with a spatial resolution of <10 μm is required to successfully date xenotime; to date, this has only been achieved by ion microprobe. In metamorphosed sedimentary rocks, diagenetic xenotime retains its age information up to lower amphibolite facies in sandstone, and up to mid-upper greenschist facies in pelitic rocks. In many Precambrian basins (e.g., Witwatersrand Basin, South Africa), diagenetic xenotime is overgrown by chemically distinct and texturally younger xenotime related to burial diagenesis, contact metamorphism, hydrothermal alteration or regional metamorphism. With the aid of petrography, geochemical microanalysis and the use of isotopic techniques with fine spatial resolution, it may be possible to use xenotime to date early diagenesis, and potentially every major fluid and thermal event to have affected a depositional basin.

Radiometric dating of sedimentary rocks: the application of diagenetic xenotime geochronology

Recent advances in the field of geochronology have led to a greater understanding of the scale and duration of geological processes. It is currently possible to date igneous and metamorphic rocks by a variety of radiometric methods to within a million years, but establishing the depositional age of sedimentary rocks has remained exceedingly difficult. The problem is most pronounced for Precambrian rocks, where the low diversity and abundance of organisms have prevented the establishment of any meaningful biostratigraphic framework for correlating strata. Also, most Precambrian successions have been metamorphosed, rendering original minerals and textures difficult to interpret, and resetting diagenetic minerals. Xenotime (YPO 4) is an isotopically robust chronometer, which is increasingly being recognized as a trace constituent in siliciclastic sedimentary rocks. It may start to grow during early diagenesis, typically forming syntaxial outgrowths on detrital zircon grains. Diagenetic xenotime occurs in a wide variety of rock types, including conglomerate, sandstone, siltstone, shale, phosphorite and volcaniclastic rocks, varying from early Archaean to Mesozoic in age. The formation of diagenetic xenotime is principally related to redox cycling of Fe-oxyhydroxides and microbial decomposition of organic matter, leading to elevated concentrations of dissolved phosphate and rare earth elements (REE) in sediment pore-waters. Xenotime has the properties of an ideal U–Pb chronometer, containing elevated levels of U (generally >1000 ppm) and very low concentrations of initial common Pb. In addition, it has an exceptional ability to remain closed to element mobility during later thermal events, and commonly yields concordant and precise dates. Because of the small size of diagenetic xenotime crystals and common textural complexities, an in situ isotopic technique with a spatial resolution of <10 μm is required to successfully date xenotime; to date, this has only been achieved by ion microprobe. In metamorphosed sedimentary rocks, diagenetic xenotime retains its age information up to lower amphibolite facies in sandstone, and up to mid-upper greenschist facies in pelitic rocks. In many Precambrian basins (e.g., Witwatersrand Basin, South Africa), diagenetic xenotime is overgrown by chemically distinct and texturally younger xenotime related to burial diagenesis, contact metamorphism, hydrothermal alteration or regional metamorphism. With the aid of petrography, geochemical microanalysis and the use of isotopic techniques with fine spatial resolution, it may be possible to use xenotime to date early diagenesis, and potentially every major fluid and thermal event to have affected a depositional basin.

Neoproterozoic allochthonous salt tectonics during the Lufilian orogeny in the Katangan Copperbelt, central Africa

The Neoproterozoic Katangan rocks in the Copperbelt of Shaba (Democratic Republic of the Congo) and Zambia contain the world's largest concentration of stratiform copper-cobalt ores. We propose that during the Lufilian orogeny, the Katangan basin was radically transformed first by extrusion of allochthonous evaporites, then by orogenic shortening. Salt tectonics plausibly explains spectacular breccias underlying 25,000 km2 and containing gigaclasts up to 10 km long. The brecciated Shaban Roan Supergroup—the lowermost Katangan unit—forms regional detachments and diapirs. The former existence of Roan evaporites is indicated by sabkha facies, crystals, and pseudomorphs of gypsum and anhydrite, stratigraphic gaps underlain by collapse breccias, chloride inclusions in ores, hydrothermally propylitized ore hosts, and saline springs. Salt tectonics began during deposition of the Roan Supergroup between 1050 and 950 Ma. In mid-Roan time, small walls and extrusions of evaporite-gigabreccia began to be emplaced. In early Kundelungu time (940–850 Ma), evaporitic diapirs enlarged. Lufilian deformation began between 850 and 650 Ma by laterally squeezing diapirs to form salt welds. Then, a large sheet of commingled Roan evaporite and carbonate-dominated sediments and ores was extruded northward by ∼65 km. Extrusion was fast enough to blanket a uniform preorogenic footwall unit without overriding any synorogenic deposits. Continued shortening then emplaced large thrust sheets, lubricated by the preexisting salt-sediment extrusive sheet. Restoration suggests that the Lufilian foreland in this area shortened from 193 km to 85 km. The depositional northern edge of the evaporite basin controlled the shape of the Outer Lufilian Arc. We infer three original salt provinces. The large-scale salt tectonics inferred here has implications for ore genesis and may yet be recognized in other Precambrian basins.

System analysis to estimate subsurface flow: from global level to the State of Minnesota

Stream runoff data globally and in the state of Minnesota were used to estimate subsurface water flow. This system approach is based, in principal, on unity of groundwater and surface water systems, and it is in stark contrast to the traditional deterministic approach based on modeling. In coordination with methodology of system analysis, two levels of study were used to estimate subsurface flow. First, the global stream runoff data were assessed to estimate the temporal–spatial variability of surface water runoff. Factor analysis was used to study the temporal–spatial variability of global runoff for the period from 1918 to 1967. Results of these analysis demonstrate that the variability of global runoff could be represented by seven major components (factor scores) that could be grouped into seven distinct independent grouping from the total of 18 continental slopes on the Earth. Computed variance value in this analysis is 76% and supports such analysis. The global stream runoff for this period is stationary, and is more closely connected with the stream flow of Asia to the Pacific Ocean as well as with the stream runoff of North America towards the Arctic and Pacific Oceans. The second level examines the distribution of river runoff (annual and for February) for various landscapes and the hydrogeological conditions in the State of Minnesota (218,000 km2). The annual and minimal monthly rate of stream runoff for 115 gauging stations with a period of observation of 47 years (1935–1981) were used to characterize the spatio-temporal distribution of stream runoff in Minnesota. Results of this analysis demonstrate that the annual stream runoff rate changes from 6.3, towards 3.95, and then to 2.09 l s–1 km–2 (the difference is significant based on Student's criteria). These values in Minnesota correspond to ecological provinces from a mixed forest province towards the broadleaf forest and to prairie province, respectively. The distribution of minimal monthly stream runoff rate (February runoff) is controlled by hydrogeological systems in Minnesota. The difference between the two hydrogeological regions, Precambrian crystalline basement and Paleozoic artesian basin of 0.83 and 2.09 l/s/km2, is statistically significant. Within these regions, the monthly minimal runoff (0.5 and 1.68, and 0.87 and 3.11 l s–1 km–2 for February, respectively) is also distinctly different for delineated subregions, depending on whether or not the Quaternary cover is present. The spatio-temporal structure that emerges could thus be used to generate river runoff and subsurface flow maps at any scale – from the global level to local detail. Such analysis was carried out in Minnesota with the detailed mapping of the subsurface flow for the Twin Cities Metropolitan area.

Facies Associations of Riphean Sedimentary Sequences

Large-scale facies associations typical of intra- and pericratonic Riphean sections of the Volga–Ural region, western slope of the Urals, Timan–Pechora region, Kola Peninsula, outer and inner parts of the Siberian, North American, and Indian platforms are considered. The reconstruction of their lateral and vertical relationships makes it possible to reconstruct principal trends in the evolution of late Precambrian sedimentary basins. Recommended special studies aimed at the restoration of spatial architecture of associations retained in fragments of Riphean sedimentary basins could yield a substantially new information on the basin filling. Such approach has important implications for estimation of the potential of late Precambrian sedimentary basins with respect to the exploration for mineral resources including hydrocarbons.

An introduction to Precambrian basins: their characteristics and genesis

Abstract Precambrian and younger basins reflect the interaction of sediment supply and subsidence; the latter is generally ascribed to tectonic, magmatic and related thermal processes. The interplay of supply and subsidence is further modified by eustasy and palaeoclimate. Problems and enigmas inherent in analysis of Precambrian basin-fills include: a spectrum of ideas on the maximum age of Phanerozoic-style plate tectonics in the rock record; Archaean heat flow up to two to three times present values; changes in magmatism over time (including global magmatic events); the evolution of atmospheric composition and of life and their influence on weathering, erosion and sediment supply rates; degree of preservation, deformation and metamorphism, and preservational bias (especially of intracratonic basins which would lack evidence for early plate tectonics); a limited rock record; poor age constraints, inherent errors in geochronological techniques and difficulty in dating the time of deposition of sedimentary rocks. Major influences on Precambrian basin formation are assumed to include magmatism, plate tectonics, eustasy and palaeoclimate, all of which interacted. Models for greenstone belt evolution include plate tectonic intra-oceanic generation, plume-generated oceanic plateau, and global catastrophic magmatic events that may have been transitional to a plate tectonic regime over several hundred million years. The latter transition may have included the onset of the supercontinent cycle. Insignificant preservation of Precambrian ocean floor makes evaluation of these models problematic. Eustasy was intrinsically related to continental crustal growth rates, continental freeboard and the hypsometric curves of emerging cratons. Possible maximum crustal growth rates near the Archaean–Proterozoic boundary led to globally elevated sea levels, and the formation of enormous carbonate-banded iron formation platforms where cyanobacterial mats, which produced oxygen, flourished. The combination of changes in cratonic growth rates, thermal elevation of cratons, eustasy, weathering and palaeo-atmosphere composition may have combined to produce the first global glaciation at ca. 2.4–2.2 Ga. Examples of basins discussed here emphasise the interaction of tectonism, magmatism, eustasy and palaeoclimate in their evolution. For the Neoarchaean Witwatersrand basin (Kaapvaal craton, South Africa), evidence for all these factors is preserved in the basin-fill, whereas for the Neoproterozoic Macaubas basin (Sao Francisco craton, Brazil), clear evidence for eustasy is more limited. The ca. The origin of greenstone basins remains contentious. That magmatism was a major factor in their evolution is accepted by most, but whether this was plate-independent or plate-driven is less certain; the role of mantle plumes and the possibility of greenstones having been ridge-generated are also discussed by some workers. Episodic magmatism on a global scale may have played a role in the evolution of early basins such as the greenstones, Witwatersrand and Ventersdorp, and with a possible transition to plate tectonics into the Palaeoproterozoic, mid-ocean ridge growth related to either supercontinent break-up or to continental crustal growth rates probably influenced the eustatically controlled Hamersley and Lower Transvaal basin sedimentation. The possibility that early plate tectonics was characterised by variable spreading and subduction rates is discussed in the light of evidence from the Witwatersrand basin, the North American, Baltic and Siberian cratons, and the Transvaal Supergroup. In conclusion, Precambrian basin evolution probably reflects the variable interaction of tectonism, magmatism, eustasy and palaeoclimate (as also found for Phanerozoic basins), with the most significant difference compared to younger basins lying in the relative rates of processes such as ridge-spreading, subduction, crustal growth, weathering and atmospheric compositional change.

Oceanography, bathymetry and syndepositional tectonics of a Precambrian intracratonic basin: integrating sediments, storms, earthquakes and tsunamis in the Belt Supergroup (Helena Formation, ca. 1.45Ga), western North America

The carbonate-dominated Helena Formation of the Mesoproterozoic Belt Supergroup of western North America provides an instructive example of how a range of regional depositional and environmental characteristics of an ancient sea can be deduced on the basis of micron- to metre-scale features. Particularly revealing is the window opened by the presence of abundant molar-tooth structure onto the paleoceanography, paleobathymetry, paleoclimate and tectonic regime of this intracratonic Precambrian basin.

Sedimentation rates, basin analysis and regional correlations of three Neoarchaean and Palaeoproterozoic sub-basins of the Kaapvaal craton as inferred from precise U–Pb zircon ages from volcaniclastic sediments

Calculation of sedimentation rates of Neoarchaean and Palaeoproterozoic siliciclastic and chemical sediments covering the Kaapvaal craton imply sedimentation rates comparable to their modern facies equivalents. Zircons from tuff beds in carbonate facies of the Campbellrand Subgroup in the Ghaap Plateau region of the Griqualand West basin, Transvaal Supergroup, South Africa were dated using the Perth Consortium Sensitive High Resolution Ion Microprobe II (SHRIMP II). Dates of 2588±6 Ma and 2549±7 Ma for the middle and the upper part of the Nauga Formation indicate that the decompacted sedimentation rate for the peritidal flat to subtidal below-wave-base Stratifera and clastic carbonate facies, southwest of the Ghaap Plateau at Prieska, was of up to 10 m/Ma, when not corrected for times of erosion and non-deposition. Dates of 2516±4 Ma for the upper Gamohaan Formation and 2555±19 for the upper Monteville Formation, indicate that some 2000 m of carbonate and subordinate shale sedimentation occurred during 16 Ma to 62 Ma on the Ghaap Plateau. For these predominantly peritidal stromatolitic carbonates, decompacted sedimentation rates were of 40 m/Ma to over 150 m/Ma (Bubnoff units). The mixed siliciclastic and carbonate shelf facies of the Schmidtsdrif Subgroup and Monteville Formation accumulated with decompacted sedimentation rates of around 20 B. For the Kuruman Banded Iron Formation a decompacted sedimentation rate of up to 60 B can be calculated. Thus, for the entire examined deep shelf to tidal facies range, Archaean and Phanerozoic chemical and clastic sedimentation rates are comparable. Four major transgressive phases over the Kaapvaal craton, followed by shallowing-upward sedimentation, can be recognized in the Prieska and Ghaap Plateau sub-basins, in Griqualand West, and partly also in the Transvaal basin, and are attributed to second-order cycles of crustal evolution. First-order cycles of duration longer than 50 Ma can also be identified. The calculated sedimentation rates reflect the rate of subsidence of a rift-related basin and can be ascribed to tectonic and thermal subsidence. Comparison of the calculated sedimentation rates to published data from other Archaean and Proterozoic basins allows discussion of general Precambrian basin development. Siliciclastic and carbonate sedimentation rates of Archaean and Palaeoproterozoic basins equivalent to those of younger systems suggest that similar mechanical, chemical and biological processes were active in the Precambrian as found for the Phanerozoic. Particularly for stromatolitic carbonates, matching modern and Neoarchaean sedimentation rates are interpreted as a strong hint of a similar evolutionary stage of stromatolite-building microbiota. The new data also allow for improved regional correlations across the Griqualand West basin and with the Malmani Subgroup carbonates in the Transvaal basin. The Nauga Formation carbonates in the southwest of the Griqualand West basin are significantly older than the Gamohaan Formation in the Ghaap Plateau region of this basin, but are in part, correlatives of the Oaktree Formation in the Transvaal and of parts of the Monteville Formation on the Ghaap Plateau.

Three-dimensional computer-assisted basin modelling to generate exploration target areas: an example from the late Archaean-early Proterozoic Transvaal Supergroup, South Africa

Second- and third-order fault-bounded Precambrian basins frequently host deposits of the sedimentary massive sulphide group. Three-dimensional geometric modelling of the thickness of preserved basin-fill successions of the Transvaal Supergroup, using DATAMINE software, and residual gravity modelling of the contemporary basement floor, help delineate areas of exploration potential in this unit. Two main depositional axes are tentatively identified for the basal volcano-sedimentary protobasinal Transvaal successions. A sheet-like geometry was indicated for the succeeding Black Reef sandstones and Chuniespoort Group chemical sedimentary rocks. The uppermost Pretoria Group thickness model delineates eastern and western second-order basins separated by a central submerged palaeohigh. A similar isopach pattern is noted for the thick shales of the Silverton Formation in this group, with, in addition, a well-defined third-order basin in the northwest of the western second-order basin. The residual gravity model indicates two linear palaeovalleys adjacent to this western basin, one coincident with one of the axes inferred for the protobasinal rocks. The fault-bounded second- and third-order basins and depositional axes postulated here are consistent with known geological data and suggested sedimentation models. Cumulative distortions implicit in the DATAMINE computer modelling technique are reduced when the method is applied on the basin-wide scale, enabling identification of regional exploration target areas rather than immediate prospecting targets.

The Kanye axis, Kaapvaal craton, southern Africa: a postulated Archaean crustal architectural element inferred from three-dimensional basin modelling of the lower Transvaal Supergroup

The Kanye axis of Late Archaean/Palaeoproterozoic rifting, volcanism and sedimentation, is postulated mainly from three-dimensional basin modelling of the lower Transvaal Supergroup, carried out using DATAMINE software. Acid lavas and intrusives of the pre-Transvaal Kanye suite, which occur in eastern Botswana adjacent parts of South Africa and further eastwards below the Dennilton fragment in the Bushveld complex, he on the inferred axis. Both lowermost Transvaal volcano-sedimentary successions and the overlying sheet sandstones of the Black Reef Formation have major axes of subsidence and deposition along this proposed Kanye trend in the DATAMINE basin-fill models. Geophysical data also support the suggested Kanye trend, as does the location of younger intrusive bodies such as the Pilanesberg and Goudini alkaline complexes in South Africa. Three-dimensional basin modelling using DATAMINE software provides a powerful tool in evaluating the tectono-sedimentary history of ancient Precambrian basins, such as that of the Late Archaean/ Palaeoproterozoic Transvaal Supergroup of southern Africa.

Petroleum Prospectivity in Precambrian and Early Paleozoic Basins, Australia

Proterozoic to Devonian age strata with some potential for petroleum accumulations are known from sedimentary basins covering {approximately}1,870,000 km{sup 2} onshore Australia. Portions of these very old basins have not sustained the deleterious effects of deep burial. Explorers with vision continue to target these very old rocks in the MacArthur/South Nicholson, Amadeus, Canning, Adavale, and Bonaparte basins. Approximately 429,000 km{sup 2} of these basins remain under license for petroleum exploration. The oldest known oil in Australia is reservoired within and sourced from the mid-Proterozoic in the McArthur basin. The Early Ordovician Pacoota Sandstone of the Amadeus basin is the oldest formation commercially exploited for oil and gas in Australia. Significant discoveries awaiting development include Dingo, Pictor, and Gilmore. The Tern gas field trap in the Bonaparte basin is related to a salt diapir; the salt probably being Silurian-Devonian in age. Salt probably of the same age has formed diapirs in the Canning basin, too. Cambrian and Proterozoic salt-bearing strata are likewise the cause and core of some anticlinal and diapiric structures in the Amadeus basin. Minor oil shows have been reported from the Cambrian of the Officer basin. The Warburton, Pedirka, Arrowie, Ord, Wiso, Georgina, and Ngalia basins contain Proterozoicmore » and early Paleozoic sedimentary rocks but are ascribed only limited petroleum prospectivity at this time.« less

Sur l'origine oceanique des metabasites de la chaine du mayombe (Gabon, Congo, Zaïre, Angola)

Abstract The Precambrian Mayombian belt is actually considered to be the result of the closure of an oceanic basin located between a western Eburnean craton and an eastern Archaean craton. The cratonic collision, which took place about 1000 Ma ago, induced the tectonic emplacement of ophiolites along the axis of the belt. This collision favoured the formation of the Nyanga's and Niari's epicontinental basins, deformed later during the Panafrican episode. Geochemial studies of the metabasites of the suture confirm their oceanic origin: they are olivine tholeiites similar to abyssal tholeiites. Different from the tholeiites intruded in a lithospheric stretching model, they are almost identical to the tholeiites of the Red Sea. This evolution model for the Mayombian belt: Kibarian narrow ocean floor basins, which closure leads to the Precambrian superior epicontinental basins, is similar to the Burundian of Burundi and to the Kibarian of Zaire. It seems to be general for the post-Eburnean belts in Central Africa.

Paleobasin Analysis and Tectonic Framework Development of Southern Zagros Basin, Interpreted from Landsat 4 Thematic Mapper Image: ABSTRACT

Detailed lineament maps produced with the digitally enhanced Landsat 4 thematic mapper in conjunction with field data provide new information on structural relations to the southern Zagros basin. Three major parallel lineaments are from north to south, Qatar-Kazern, Razak, and Oman. These lineaments trend approximately N17/sup 0/E and subdivide the Zagros basin into northern, central, and southern segments. The study area is enclosed by the Razak and Oman lineaments. Piercement salt domes (Precambrian salt) are abundant within the southern Zagros basin, absent east of the Oman lineament, and scarce in the area west of the Razak lineament. This salt dome distribution and the N17/sup 0/E trend suggest that these lineaments are surface manifestations of boundaries of basement crustal blocks that have been reactivated periodically since the Precambrian. The northern extension of this Precambrian basin is marked by salt domes (Precambrian salt) along the Oman lineament, located in the Kerman region 400 km north of Minab. Along the eastern boundary, at the juncture of the southern Zagros basin and western Makran Ranges, the trend of fold axes changes from east-west to north-south. The western basin boundary is characterized by a gradual change in the trend of the fold axis from east-westmore » to northwest-southeast. This study provides useful information for subsurface interpretations, which will benefit hydrocarbon exploration. The Razak and Oman lineaments enclose a highly productive area, and separate the southern Zagros basin from less productive areas to the west and from a nonproductive region to the east where chromite and iron deposits are common. These findings suggest that lineaments may serve as an exploration guide for hydrocarbons and economic mineral deposits, and as a model for developing the tectonic framework of the southern Zagros basin.« less