Power-Efficient Gathering In Sensor Information Systems Research Articles

Evaluation on Data Transmission in Wireless Sensor Networks Based on Computer Technology

Traditional network data transmission (DT) has certain limitations in terms of processing, storage, and communication capabilities. Moreover, DT is easily affected by the network environment, which can reduce the real-time performance of DT. In severe cases, network transmission failures, DT interruptions, and other issues may even occur. As a new network, wireless sensor networks (WSN) have been widely used in military, industrial, agricultural, medical and other fields. In this paper, WSN was regarded as an important research method, and in-depth research was carried out around the real-time and energy consumption (for the convenience of the following text, the abbreviation for energy consumption is EC) of WSN DT. This paper focused on the issues of real-time performance, EC, and real-time transmission. It balanced EC and improved real-time performance through the low energy adaptive clustering hierarchy (LEACH) protocol and the power-efficient gathering in sensor information systems (PEGASIS) protocol. The experimental results showed that the real-time rates of LEACH under single reaction nodes were 45.5% and 48.6%, respectively. The lowest and highest real-time rates of PEGASIS were 86.2% and 89.5%, respectively. The real-time rate of PEGASIS was much higher than that of LEACH, proving that the proposed PEGASIS had high real-time performance and reduced DT delay.

Swarm energy efficient power efficient gathering in sensor information systems protocol in wireless sensor networks

Wireless sensor network (WSN) is a network, which has more numbers of sensors that are small in nature and are self organised. The inbuilt battery system is provided in the sensor nodes through which the nodes can communicate and do good operations among the other nodes available in the network. Lifetime is the most essential parameter which needs to be maximised for the WSN. This measure is more important for conservation of energy, for adequate and efficient performance of sensor networks. This paper proposes a swarm energy efficient power efficient gathering in sensor information systems (PEGASIS) (SEE-PEG) based energy optimization algorithm for WSN in which clustering and clustering head selection are done by using modified particle swarm optimization (MPSO) algorithm with respect to minimizing the consumption of power in WSN. The parameters evaluated for the proposed method is compared with existing technique like energy efficient PEGASIS without optimization. The simulation results are obtained using matlab tool.

EEGT: Energy Efficient Grid-Based Routing Protocol in Wireless Sensor Networks for IoT Applications

The Internet of Things (IoT) integrates different advanced technologies in which a wireless sensor network (WSN) with many smart micro-sensor nodes is an important portion of building various IoT applications such as smart agriculture systems, smart healthcare systems, smart home or monitoring environments, etc. However, the limited energy resources of sensors and the harsh properties of the WSN deployment environment make routing a challenging task. To defeat this routing quandary, an energy-efficient routing protocol based on grid cells (EEGT) is proposed in this study to improve the lifespan of WSN-based IoT applications. In EEGT, the whole network region is separated into virtual grid cells (clusters) at which the number of sensor nodes is balanced among cells. Then, a cluster head node (CHN) is chosen according to the residual energy and the distance between the sink and nodes in each cell. Moreover, to determine the paths for data delivery inside the cell with small energy utilization, the Kruskal algorithm is applied to connect nodes in each cell and their CHN into a minimum spanning tree (MST). Further, the ant colony algorithm is also used to find the paths of transmitting data packets from CHNs to the sink (outside cell) to reduce energy utilization. The simulation results show that the performance of EEGT is better than the three existing protocols, which are LEACH-C (low energy adaptive clustering hierarchy), PEGASIS (power-efficient gathering in sensor information systems), and PEGCP (maximizing WSN life using power-efficient grid-chain routing protocol) in terms of improved energy efficiency and extended the lifespan of the network.

Joint Shortest Chain and Fair Transmission Design for Energy-Balanced PEGASIS in WSNs

The conventional routing protocol considers several local transmission factors in a single node for the many-to-one packet transmission. These factors lead to rapid energy consumption in some specific nodes, thereby generating energy holes to reduce network lifetime. In this article, a novel energy-balanced power-efficient gathering in sensor information systems (EB-PEGASISs) is proposed to improve energy efficiency and utilization for wireless sensor networks (WSNs). In the original power-efficient gathering in sensor information system (PEGASIS), the protocol constructs a chain-based network with the locally shortest distance rather than the globally optimal network length. To improve this, two construction algorithms are proposed to achieve the shortest network length in the EB-PEGASIS, including centralized formation and distributed construction schemes. In the centralized algorithm, the chain length of each starting node is computed, and the minimum chain length can be subsequently determined in the following packet transmission phase. In order to reduce formation complexity, a distributed method uses the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$K$ </tex-math></inline-formula> -means clustering algorithm to partition the network into clusters. In particular, it forms a subchain in each cluster and connects each subchain into the final shortest chain. Additionally, to balance the energy consumption among all nodes in the packet transmission phase, Jain’s fairness index for residual battery capacity is designed to minimize the fluctuation of energy consumption among nodes in a network. As a result, not only energy efficiency is achieved with the shortest chain length but also energy utilization is balanced for packet transmission. Ultimately, simulation results validate that the network lifetime of the EB-PEGASIS is about 2.46 times the original PEGASIS and 3.36 times the random projection-polar coordinate-chain (RPC) protocol for WSNs.

Efficient Energy and Delay Reduction Model for Wireless Sensor Networks

In every network, delay and energy are crucial for communication and network life. In wireless sensor networks, many tiny nodes create networks with high energy consumption and compute routes for better communication. Wireless Sensor Networks (WSN) is a very complex scenario to compute minimal delay with data aggregation and energy efficiency. In this research, we compute minimal delay and energy efficiency for improving the quality of service of any WSN. The proposed work is based on energy and distance parameters as taken dependent variables with data aggregation. Data aggregation performs on different models, namely Hybrid-Low Energy Adaptive Clustering Hierarchy (H-LEACH), Low Energy Adaptive Clustering Hierarchy (LEACH), and Multi-Aggregator-based Multi-Cast (MAMC). The main contribution of this research is to a reduction in delay and optimized energy solution, a novel hybrid model design in this research that ensures the quality of service in WSN. This model includes a whale optimization technique that involves heterogeneous functions and performs optimization to reach optimized results. For cluster head selection, Stable Election Protocol (SEP) protocol is used and Power-Efficient Gathering in Sensor Information Systems (PEGASIS) is used for driven-path in routing. Simulation results evaluate that H-LEACH provides minimal delay and energy consumption by sensor nodes. In the comparison of existing theories and our proposed method, H-LEACH is providing energy and delay reduction and improvement in quality of service. MATLAB 2019 is used for simulation work.

Adaptive Threshold Residual Energy‐Based Efficient Sensor Network Protocol (ATREEN)

Wireless sensor network (WSN) hierarchical (clustering) routing involves the gathering of sensor nodes to form clusters in which sensor node communicates to cluster head (CH). The CH is responsible for data aggregation and forwarding collected data toward base station (BS). Energy expenditure in usual protocols becomes unequal because of clusters having diverse lengths. In this paper, we propose another new enhanced clustering protocol called adaptive threshold residual energy‐based efficient sensor network protocol (ATREEN) for adaptive selection of CH in WSNs. In ATREEN, CHs are chosen by comparing threshold of node value with respect to distance between cluster member and CH, residual energy of sensor nodes, and position of sensor node with respect to BS. Simulation results show that ATREEN protocol extends network lifetime and stability with decline in energy dissipation compared to clustering protocols such as low‐energy adaptive clustering hierarchy (LEACH), power‐efficient gathering in sensor information systems (PEGASIS), and distributed energy‐efficient clustering (DEEC) scheme for heterogeneous WSNs.

D2CRP: A Novel Distributed 2-Hop Cluster Routing Protocol for Wireless Sensor Networks

Typically, wireless sensor networks (WSNs) use limited-capacity batteries that cannot be recharged or replaced. In general, designing an energy-efficient routing protocol has a significant impact on prolonging the network lifetime. In this article, a novel distributed 2-hop cluster-routing protocol (D2CRP) is introduced to achieve energy efficiency in WSNs. In the cluster formation phase, each node obtains the information of its neighbor nodes within the 2-hop range to form the 2-hop cluster in a fully distributed manner. The transmission distance and residual energy are jointly considered to determine the energy-efficient cluster head (CH) in each 2-hop cluster. After the CH is generated, each member node can transmit packets to its 1-hop neighbor or the CH directly. To reduce the overall transmission distance for intercluster communication, multiple chains can be formed among CHs via their adjacent CHs that are closer to the base station (BS). As a result, energy-efficient intracluster and intercluster routing can be achieved for packet transmission. In addition, the optimal cluster number of 2-hop clustering is formulated and derived to minimize the energy consumption for both intracluster and intercluster communications. Simulation results show that the optimal cluster number of D2CRP can be achieved and D2CRP is effectively improved on the performances of network lifetime, energy consumption, and packet transmission than the other four state-of-the-art competitive routing protocols, including low-energy adaptive clustering hierarchy (LEACH), R-LEACH, power-efficient gathering in sensor information system (PEGASIS), and two-tier distributed fuzzy logic-based protocol (TTDFP).

A Novel Approach for Energy-Efficient of WSN Using PEGASIS Protocol

Wireless Sensor Networks (WSNs) have hardware and software limitations and are deployed in hostile environments. The problem of energy consumption in WSNs has become a very important axis of research. To obtain good performance in terms of the lifetime of the WSN, several routing protocols have been proposed. We present in this article a new approach for the energy efficiency of WSN by using the PEGASIS (Power Efficient Gathering In Sensor Information Systems) routing protocol in order to reduce sensor energy consumption and to achieve good performance in terms of the lifetime of the network in WSN. The simulation results have shown that our proposed protocol excels regarding energy consumption in wireless sensor networks, resulting in an extension of a lifetime for the network. We simulated the proposed technique compared with traditional LEACH (Low-Energy Adaptive Clustering Hierarchy) protocol using MATLAB environment.

Integration of fault-tolerant feature to OMIEEPB routing protocol in wireless sensor network

PurposeWhereas a human operator is hard to observe the networking infrastructure and its functions on a continuous basis, wireless sensor network (WSN) nodes must overcome faults and route the perceived data to the sink/base stations (BS). The main target of this research article is to ensure the fault-tolerance (FT) capability, especially for transmission of sensed data to its destination without failure. Thus, through this paper, a fuzzy-based subordinate support (FSS) system is introduced as an additional feature to the existing optimized mobile sink improved energy efficient Power-Efficient Gathering in Sensor Information Systems (PEGASIS)-based (OMIEEPB) routing protocol, which lacks focus on ensuring the FT capabilities to the selected leaders of the corresponding chain. The central focus of FSS is to prevent the incident of fault, especially to the cluster heads.Design/methodology/approachWSNs encounter several issues owing to random events or different causes such as energy exhaustion, negative influences of the deployed region, signal interference, unbalanced supply routes, instability of motes due to misalignments and collision, which ultimately intends the failure of the network. Throughout the past investigation periods, researchers gain an understanding of fault-tolerant strategies that may improve the data integrity or reliability, precision, energy efficiency, the life expectancy of the system and reduce/prevent the failure of deployed components. If that is the case, the maximum chances of data packets (sensed) needed to be transferred reliably and accurately to the sink node or BS are degraded.FindingsThe FSS system utilizes the fuzzy logic concepts that have been proved to be beneficial since it permits several parameters to be combined effectively and evaluated. Here, near-point, residual energy, total operation time and past average processing time are considered as vital parameters. Moreover, the FSS system ensures the key performance activities of the network, such as optimization of response time, enhancing the data transmission reliability and accuracy. Simulation-based experiments are carried out through the Mannasim framework. After several experimental executions, the outcome of the proposed system is analyzed through elaborated comparison with the advanced existing systems.Originality/valueFinally, it has been observed that the FSS system not only enhanced the FT features to OMIEEPB but also assures the improved accuracy level (>95%) with optimized response time (<0.09 s) during data communication between leaders and the normal nodes.

Reducing Power Consumption in Hexagonal Wireless Sensor Networks Using Efficient Routing Protocols

Power consumption and network lifetime are vital issues in wireless sensor network (WSN) design. This motivated us to find innovative mechanisms that help in reducing energy consumption and prolonging the lifetime of such networks. In this paper, we propose a hexagonal model for WSNs to reduce power consumption when sending data from sensor nodes to cluster heads or the sink. Four models are proposed for cluster head positioning and the results were compared with well-known models such as Power Efficient Gathering In Sensor Information Systems (PEGASIS) and Low-Energy Adaptive Clustering Hierarchy (LEACH). The results showed that the proposed models reduced WSN power consumption and network lifetime.

Sector Tree-Based Clustering for Energy Efficient Routing Protocol in Heterogeneous Wireless Sensor Network

One of the main challenges for researchers to build routing protocols is how to use energy efficiently to extend the lifespan of the whole wireless sensor networks (WSN) because sensor nodes have limited battery power resources. In this work, we propose a Sector Tree-Based clustering routing protocol (STB-EE) for Energy Efficiency to cope with this problem, where the entire network area is partitioned into dynamic sectors (clusters), which balance the number of alive nodes. The nodes in each sector only communicate with their nearest neighbour by constructing a minimum tree based on the Kruskal algorithm and using mixed distance from candidate node to base station (BS) and remaining energy of candidate nodes to determine which node will become the cluster head (CH) in each cluster? By calculating the duration of time in each round for suitability, STB-EE increases the number of data packets sent to the BS. Our simulation results show that the network lifespan using STB-EE can be improved by about 16% and 10% in comparison to power-efficient gathering in sensor information system (PEGASIS) and energy-efficient PEGASIS-based protocol (IEEPB), respectively.

A Segment-based Tree Traversal Algorithm for Enhancing Data Gathering in Wireless Sensor Networks

Wireless Sensor Networks (WSNs) are sink-based networks in which assigned sinks gather all data sensed by lightweight devices that are deployed in natural areas. The sensor devices are energyscarce, therefore, energy-efficient protocols need to be designed for this kind of technology. PowerEfficient GAthering in Sensor Information Systems (PEGASIS) protocol is an energy-efficient data gathering protocol in which a chain is constructed using a greedy approach. This greedy approach has appeared to have unbalanced distances among the nodes which result in unfair energy consumption. Tree traversal algorithms have been used to improve the constructed chain to distribute the energy consumption fairly. In this research, however, a new segmentbased tree traversal approach is introduced to further improve the constructed chain. Our new proposed algorithm first constructs initial segments based on a list of nodes that are sorted according to post-order traversal. Afterwards, it groups these segments and concatenates them one by one according to their location; thus, our proposed approach uses location-awareness to construct a single balanced chain in order to use it for the data gathering process. This approach has been evaluated under various numbers of sensor devices in the network field with respect to various crucial performance metrics. It is shown in our conducted simulation results that our proposed segment-based chain construction approach produces shorter chains and shorter transmission ranges which as a result has improved the overall energy consumption per round, network lifetime, and end-to-end delay.

"Energy Cost Calculations for Enhanced Power Efficient Gathering in Sensor Information Systems Algorithm with Mobile-Sink "

"The issue of energy consumption in wireless sensor networks is an important issue nowadays, Power efficient gathering in sensor information systems (PEGASIS) acts as routing protocols improve the energy consumed, which is one of the most important hierarchical directives used and that works to collect and transfer data to and from a neighbor to reduce duplication of data transfer by transferring data to bypass the dead node. In this research paper, experimental results have been made to improve the performance with new location for nodes trajectory to mobile sink, Finally, minimum cost for data gathering calculated to optimize network performance and life time with parameters of enhanced PEGASIS criteria to show the impact of factors changing.

Pegasis Double Cluster Head Hybrid Congestion Control in Wireless Sensor Networks

Wireless sensor network (WSN) is the fastest growing technology that dominates the future world into wireless communication. It is a collection of a number of self-governing sensor nodes responsible to sense, process and manipulate the nodes. The sensor nodes are regulated by a battery where the network gets failed if the battery is dead. Thus, energy is an important factor to be efficiently used. Furthermore, congestion occurs in WSN when the incoming traffic load exceeds the capacity of the network. The major factors that lead to congestion are buffer overflow, varying rates of transmission, packet collision, and many-to-one data transmission. Due to these, the network suffers from packet loss, queuing delay, end-to-end delay, decrease in network lifetime, and increase in energy consumption. Hence, a clustering-based routing protocol is introduced in this paper to improve the performance of the network and reduce congestion. In the proposed method, Power-Efficient Gathering in Sensor Information Systems (PEGASIS) double cluster head with artificial neural network (ANN) is utilized to analyze the overall network lifetime. The proposed technique is comprised of four phases: clustering the network nodes, cluster head (CH) selection, chain formation, and secondary CH (SCH) selection. The sensor nodes are initially clustered with the firefly algorithm in which the cluster heads of each node are elected via an artificial neural network. Meanwhile, chain formation is processed by PEGASIS double cluster head (PDCH) and the SCH is selected through grey wolf optimizer (GWO) to afford equivalent energy utilization between the sensor nodes. The simulation outcomes proved that the proposed method efficiently increases the lifetime of the network and reduces congestion level in WSN.

Comparison of LEACH and PEGASIS Hierarchical Routing Protocols in WSN

&lt;p&gt;Wireless Sensor Networks is a group of sensor nodes dispatched in a geographical area for a defined objective. These sensor nodes are characterized by limited capacity of communicating, computing and especially of energy. The performance of these WSN is resting on a good routing protocol, hence the need to choose the routing protocol able to satisfy the wsn's objectives, and to satisfy the common challenge to prolong network life time.&lt;/p&gt;&lt;p&gt;Several routing concepts have been proposed for the WSN, hierarchical routing is one of the most used concepts. It is divided into 3 types: cluster based routing, grid based routing and chain based protocol. In this paper, we are interested to Study, analyse and compare two popular routing protocols for Wireless sensor networks (WSNs), Low-Energy Adaptive Clustering Hierarchy (LEACH) using clusters based concept and Power-Efficient Gathering in Sensor Information System (PEGASIS) with chain based concept. The both protocols are simulated with Matlab simulator, in order to evaluate its performances against the different users and the WSNs objectives defined.&lt;/p&gt;

Irrigation control system‐data gathering in WSN using IOT

SummaryAgriculture plays an important role in the growth of agriculture nation like India. The main source of water is essential for agriculture. The irrigation process supplies water, but sometimes the wastage of water may occur. For this reason, the irrigation control scheme in wireless sensor network (WSN) using Internet of things (IoT) is developed to save water and time. This paper presents an ANFIS‐PEGASIS: Irrigation control system‐data gathering in WSN using IoT. The process of the fuzzy inference system (FIS) is utilized for an optimum cluster head (CH) selection that depends on the distance and residual energy. After that, the power‐efficient gathering in sensor information system (PEGASIS) is used for the data collecting process in irrigation structure. PEGASIS is to make a chain between the sensor nodes (SNs), and every node communicates to the CH, and it's transferring the data to the base station (BS). Finally, the decision‐making process can be implemented by adaptive neuro‐FIS (ANFIS) for the automated irrigation process. ANFIS is a useful tool for the decision‐making process. Here, based on the information delivered by the sensors, the decisions are generated using ANFIS for the irrigation system. In the system, the various sensors like humidity, temperature, light intensity, and soil moisture are utilized to sense the different parameters of soil. Based on the value of soil moisture, the land becomes automatically irrigated by ON/OFF, the lamp, and the water pump. The simulation outcomes show that the developed (ANFIS‐PEGASIS) technique outperforms other recent approaches.

Analysis of Binary and Discrete Grey Wolf Optimization Algorithms Applied for Enhancing Performance of Energy Efficient Low Energy Adaptive Clustering Hierarchy

Wireless sensor networks (WSN) are a yield of advancement in information technology and the requirement of large-scale communication infrastructures. Routing of data via selected paths is a critical task in WSN as process need to be carried on under resource constraint situations. This route identification problem can be better handled by employing appropriate heuristic bio-inspired computational intelligence optimization method. The most frequently applied routing is hierarchical routing algorithm is Low Energy Adaptive Clustering Hierarchy (LEACH) algorithm which has limitations in identifying energy efficient inter and intra route communication, identification of number of cluster head (CH), an eminent node to communicate to CH and Base Station (BS), selection of CH, and computing residual energy level, etc. Hence, researchers are focusing on boosting the capability of LEACH clustering algorithm by applying heuristic bio-inspired computational intelligence optimization methods. The proposed work is an attempt in this direction through applying heuristic bio-inspired Grey Wolf Optimization algorithm (GWO) for improving the performance of LEACH algorithm. In this paper, focus is given to increase the overall network time by adapting two modifications to conventional algorithms (i) selection of vice cluster head (VCH) in addition to CH (VCH node will replace the CH when CH when CH node goes down due to unexpected reasons as sensor node work under critical and uninterruptable environments and (ii) selection of intra and inter relay nodes (intra relay node will enhance the life span during CH data gathering and inter relay node will further enhance the life span of CH by acting as a mediator between CH an BS). The Spyder-py3 tool is used to simulate the proposed algorithms, LEACH Binary Grey Wolf search based Optimization (LEACH-BGWO) and LEACH Discrete Grey Wolf search based Optimization (LEACH-DGWO) protocols. The proposed work is compared with cluster based LEACH algorithm, chain based power-efficient gathering in sensor information systems (PEGASIS) algorithm, bio-inspired GWO and Genetic Algorithm data Aggregation (GADA) LEACH protocols. The results prove that both proposed algorithms outperformed other conventional algorithms in terms of prolonged network lifespan and increased throughput. Among proposed algorithms LEACH-BGWO outperformed LEACH-DGWO

A New Energy Efficient Multitier Deterministic Energy-Efficient Clustering Routing Protocol for Wireless Sensor Networks

Wireless Sensor Networks (WSNs) may be incorporated with thousands of small nodes. This gives them the capability to effectively sense, communicate, and compute parameters. However, the security and life span of a WSN node is a primary concern. This paper is focused on introducing a mathematical model of a modified Multitier Deterministic Energy-Efficient Clustering (DEC) based on novel election multi-tier random probability protocol for agricultural WSNs to enhance the life span of a WSN node along with a comparison of it with existing DEC protocol. In the proposed model, the selection of cluster heads, (CH), is done based on the energy drain pattern and location of the sensor nodes, which increased the lifespan of sensor nodes. In addition, several WSN probabilistic routing protocols to save energy throughout data transmissions like Low Energy Adaptive Clustering Hierarchy (LEACH), Power-Efficient Gathering in Sensor Information Systems (PEGASIS), DEC, and Stable Election Protocol (SEP) are explained. Moreover, it has been found that, after some mathematical modification in existing DEC routing, it will be capable to give a more positive result and reduce the energy drain in WSN nodes using a selective cluster head technique based on residual energy of sensor nodes. The DEC protocol is also compared with our proposed modified protocol for showing the energy-efficiency. The energy efficiency of clustering is associated with the field of energy sustainability of wireless sensor networks which is in the scope of Symmetry journal.

HEEL: A new clustering method to improve wireless sensor network lifetime

In wireless sensor networks, some resources such as memory and energy are limited. In recent years, there has been an increasing interest in improving network lifetime. Node energy plays an important role in the network lifetime. Along with this remarkable growth in wireless sensor networks, however, there is an increasing concern over network lifetime. The principal purpose of this study is to develop an understanding of the effects of other parameters on selecting a cluster head. The methodological approach taken in this study is a mixed methodology typically based on the node's energy. The authors have operated four parameters to select the cluster head: Node energy, the energy of the node's neighbours, number of hops and number of links to neighbours. Each of these parameters has an impact in selecting the cluster head. They accurately observed hop size, energy of each sensor node, average energy of sensor neighbours, links to sensor nodes (HEEL) has better improvements in comparison of Node ranked Low Energy Adaptive Clustering Hierarchy (Nr-LEACH), Modified Low Energy Adaptive Clustering Hierarchy (ModLEACH), Low Energy Adaptive Clustering Hierarchy-B (LEACH-B), Low Energy Adaptive Clustering Hierarchy (LEACH), Power-Efficient Gathering in Sensor Information System (PEGASIS), energy-aware clustering scheme with transmission power control for sensor networks (EACLE) and hybrid energy efficient distributed clustering (HEED) algorithms in possible case of network lifetime and throughput.

Wireless Sensor Network Energy Model and Its Use in the Optimization of Routing Protocols

In this study, a Wireless Sensor Network (WSN) energy model is proposed by defining the energy consumption at each node. Such a model calculates the energy at each node by estimating the energy of the main functions developed at sensing and transmitting data when running the routing protocol. These functions are related to wireless communications and measured and compared to the most relevant impact on an energy standpoint and performance metrics. The energy model is validated using a Texas Instruments CC2530 system-on-chip (SoC), as a proof-of-concept. The proposed energy model is then used to calculate the energy consumption of a Multi-Parent Hierarchical (MPH) routing protocol and five widely known network sensors routing protocols: Ad-hoc On-demand Distance Vector (AODV), Dynamic Source Routing (DSR), ZigBee Tree Routing (ZTR), Low Energy Adaptive Clustering Hierarchy (LEACH), and Power Efficient Gathering in Sensor Information Systems (PEGASIS). Experimental test-bed simulations were performed on a random layout topology with two collector nodes. Each node was running under different wireless technologies: Zigbee, Bluetooth Low Energy, and LoRa by WiFi. The objective of this work is to analyze the performance of the proposed energy model in routing protocols of diverse nature: reactive, proactive, hybrid and energy-aware. Experimental results show that the MPH routing protocol consumes 16%, 13%, and 5% less energy when compared to AODV, DSR, and ZTR, respectively; and it presents only 2% and 3% of greater energy consumption with respect to the energy-aware PEGASIS and LEACH protocols, respectively. The proposed model achieves a 97% accuracy compared to the actual performance of a network. Tests are performed to analyze the consumption of the main tasks of a node in a network.