Power Plants In Poland Research Articles

Distribution of Rare Earth Elements in Ash from Lignite Combustion in Polish Power Plants.

Rare earth elements are an essential critical raw material in the development of modern technologies and are highly sensitive to both supply chain disruptions and market turbulence. The presented study examines the characteristics of fuel, fly ash, and bottom ash from lignite combustion in power plant units. Also, we attempted to determine the amount of amorphous glass in the ashes and whether and to what extent the glass from the ash samples is bound to REY. The suitability of the ash was assessed as an alternative source of REY. The fuel and ash samples were acquired from power plants in Poland. The tests determined the fuel quality parameters, including the chemical and phase composition, of amorphous glass using ICP-MS and XRD methods, respectively. The study showed that all ash samples dissolved in 4% HF were enriched in REY. The efficiency of REY enrichment varied, and its presence in the residue samples was found to be in similar proportions compared to the raw sample. All ash residue samples were enriched in critical elements. The obtained values of the Coutl prospective coefficient allowed for the classification of some of the analyzed ashes and their residues after dissolution in 4% HF as prospective REY raw materials.

Potential for Repowering Inland Coal-Fired Power Plants Using Nuclear Reactors According to the Coal-to-Nuclear Concept

The popularity of nuclear power as a high-availability energy source is increasing in countries that currently rely on coal-based energy. The growing use of renewable energy sources emphasizes the need for greater energy supply security and grid stability. However, nuclear reactors remain the most expensive commercially available power-generation technology, which limits investment in this field. This paper explores the feasibility of investing in Coal-to-Nuclear conversion at selected coal-fired power plant sites in Poland. By converting coal-fired infrastructure, it is possible to reduce the financial cost of constructing a nuclear power plant. The study included an analysis of hydrological conditions from 2010 to 2023 at selected locations, which determined the potential for siting high-power nuclear reactors. An analytical model was used to calculate the required water intake for cooling, and the results were compared with actual river flow measurements. The findings suggested that constructing an inland nuclear power plant in Poland is feasible while complying with legal standards regarding maximum cooling water temperature. The assessment of the four sites allowed appropriate recommendations to be made concerning further research into the implementation of Generation III reactors.

Quantitative Assessment of Gaseous Effluents during Routine Operation: A Comparative Study of Planned Nuclear Power Plants at Lubiatowo-Kopalino and Pątnów Sites in Poland

On September 2021, Polish government declared that six pressurized water reactors with combined capacity of 6–9 GWe will be built by 2040 to reduce Poland’s reliance on coal. Due to the adopted schedule, construction of the first nuclear power plant will begin in 2026, with the first reactor capacity of 1–1.6 GWe to be operational in 2033. The Polish authorities announced in 2022 the selection of two locations and technologies for Poland’s first commercial nuclear power plants. Westinghouse AP1000 reactor was selected by Polish government to be built as the first plant in the location of Lubiatowo-Kopalino, on the coast of the country. In the meantime, Poland’s ZE PAK, Polska Grupa Energetyczna, and Korea Hydro & Nuclear Power have signed the letter of intent to collaborate on the project that evaluates the feasibility of building South Korean APR1400 on Pątnów site in central Poland. The objective of this study was to acquire and examine the gaseous effluents released during the standard operation of the AP1000 and APR1400 reactor technologies, with the primary goal of focusing on estimating the potential exposure of the general public. The effluents were calculated by using the GALE code based on each nuclear reactor technical specification. The obtained results were compared with those included in the Design Control Document for each reactor. Subsequently, the HotSpot software was used to calculate the radiation risk for downwind areas by utilizing GALE code results as source terms together with specific meteorological data corresponding for each localization. The results for AP1000 at Lubiatowo-Kopalino site and for APR1400 at Pątnów site were analysed and compared in the study. As the study findings were evaluated with the Polish radiation limits for the general public, all doses remained below the legal thresholds. With no previous alike studies conducted, this research begins the analysis of radiation impacts associated with the planned nuclear power plant in Poland during normal operation.

Hybrid modeling of a circulating fluidized bed boiler for development of a prediction and prescription system for power plant operation

A novel hybrid modeling system of a circulating fluidized bed boiler was developed in this study. The proposed approach combines a computational fluid dynamics model, practice-oriented macro-scale models, and a data-driven reduced order model to capture both the physical and empirical behaviors of the boiler. The application of various modeling strategies allowed for capturing features of the simulated process at various scales and for developing a fast and accurate prediction system. The use of the computational fluid dynamics model improved the predictions of the practice-oriented macro-scale models providing more detailed flow information and the use of the reduced order model allowed for reducing the computation time by a factor of 1350. The hybrid model and its submodels were validated against real measurement data. The validation confirmed good accuracy in predicting key process variables. The developed model is used as a prediction and prescription system to enable operators to optimize the boiler operation and prevent abnormal events. The hybrid system is used for a supercritical, once-through boiler in Łagisza power plant in Poland, however, the presented modeling strategy can be applied in other power plants, which can improve efficiency, reduce emissions, enhance boiler availability, and ultimately contribute to more sustainable energy systems.

Factors Limiting the Location Possibilities of Photovoltaic and Wind Power Plants in Poland

This article focuses on factors limiting the development possibilities of Poland's photovoltaic and wind power plants. Technical, environmental and legal conditions were found and indicated as a result of research based on legal acts and literature on location possibilities of renewable energy installations under discussion. Also, formulas that can show limiting factors in absolute value are proposed. These formulas consider all limiting factors and allow for comparison between different regions of Poland concerning location impossibilities.

Ashes Qualified as a Source of Selected Critical Elements (REY, Co, Ga, V)

The subject of the research involved fly ashes from several power plants in Poland, produced in the process of hard coal and lignite combustion. The objective of this article was to determine the concentration and distribution of elements strategic for the EU economy in ashes and in their two finest grain classes (below 20 µm and 45 µm). The differences in grain size of these ashes, as shown by granulometric tests, were significant. The concentrations of elements in the ashes and in grain classes were compared with the world average (Clarke value) for this raw material. For the majority of critical elements, a dependence of the concentration on the size of ash particles was observed. The content of REY (Rare earth elements and yttrium) and other critical elements in hard coal ashes increases with decreasing particle size. Despite the increase in the concentration of REY in the class below 20 µm, the Clarke value of these elements was not exceeded. Pearson’s correlation coefficients confirmed the interdependence between some elements of the ashes. The distribution of trace elements in grain classes of the ash was determined on the basis of observations using a scanning electron microscope equipped with an EDS (Energy Dispersive Spectroscopy) detector. Components of fly ashes that can be treated as an alternative source of strategic elements for the European Union were indicated.

Repowering a Coal Power Plant Steam Cycle Using Modular Light-Water Reactor Technology

This article presents the results of a techno-economic analysis of repowering a coal-fired power plant’s steam turbine system to instead accept heat produced by a pressurized water reactor-type small modular nuclear system (PWR SMR). This type of repowering presents a challenge due to the significantly lower steam pressure and temperature produced by the nuclear system. A 460 MW supercritical power unit with steam parameters of 28 MPa/560 °C/580 °C, operated in the Łagisza Power Plant in Poland, was selected for the analysis. After repowering, the turbine system would be fed with saturated steam from the steam generators of the SMRs at a pressure of 7 MPa and a temperature of 285 °C. In total, four options for repowering were analyzed. In all cases, the existing high-pressure section of the turbine was disconnected, and the existing low-pressure stages of the turbine, as well as all auxiliary and outward components (feedwater heaters, pumps, generator, condenser, condenser cooling, etc.), are re-used in their existing configurations, except for a feedwater-heater pump that needs to be replaced. In three cases, the existing intermediate pressure turbine section acts as the high-pressure stage of the repowered system. These cases include repowering without an additional reheater (case A), with an added single-stage reheater (B) and with an added two-stage reheater (C). In the fourth case (D), the existing intermediate pressure section was replaced by a new high-pressure turbine stage suited to the SMR live steam conditions. While all four repowering options are technically possible and may represent an economic advantage compared to a complete greenfield SMR installation, option D with a new high-pressure stage is clearly the best option available, with significant cost savings, leading to a lower levelized cost of electricity (LCOE) and a higher net present value (NPV) and net present value ratio (NPVR) than the greenfield case and all other repowering. For relatively new coal power plants with equipment in good condition, this type of repowering may present a cost optimal near-term pathway.

Primary Preconditions of Benefits from the Construction of Nuclear Power Plants in Poland

Primary Preconditions of Benefits from the Construction of Nuclear Power Plants in Poland

Modelling a pumped storage power plant on the example of the Porąbka Żar power plant

This article presents the idea and mathematical model of a pumped storage power plant. PSPS Porąbka Żar was selected as the real object for modelling. Due to the specificity of the operation of an intervention-regulatory and scheduled nature related to the coverage of power demand in the power system, the possibility of different modes of operation was taken into account in the model. Porąbka-Żar power plant is a pearl of hydro-engineering on the global stage. It is the first underground and the second largest pumped storage power plant in Poland. It is located in Międzybrodzie Bialskie, in the Silesian province. The short distance between the upper reservoir of the power station, located on Mt. Żar, and the lower reservoir of the międzybrodzkie lake, the high average head of the power station of 432 m above sea level, create great opportunities for accessibility and interference in the operation of the power station. It is equipped with four reversible Francis turbine sets, which operate simultaneously with a total capacity of 500 MW in the generator mode and 542 MW in the pumping mode. Due to its high potential and short turn-on and turn-off times of the turbine sets, it plays an important role in the national power system. The mathematical model was made in Matlab - Simulink software. An important role in the control process of the facility is played by the forecast of both power demand and contingencies. The forecasting model is equipped with elements of artificial intelligence. In addition, the article shows the possibility of supplementing an operating power plant with hybrid elements. The analysis is supported by commentary and a number of charts

Soft power and the media management of energy transition: Analysis of the media narrative about the construction of nuclear power plants in Poland

The aim of this article is to describe the potential of soft power as a tool for shaping energy policy and creating social approval for activities that are not subject to a real, open and independent public debate. The article analyses media coverage about nuclear energy in Poland. The analysis is based on empirical material which appeared in selected media from 2015 to 2021 and includes nearly 5,000 media messages. A quantitative analysis of the market value of the produced media coverage about nuclear energy has been performed. The main types of narratives and arguments used to support nuclear energy have been reconstructed. The author emphasises the possibility of using the concept of soft power in the analysis of media coverages, expert statements, political messages and advertising campaigns created in the context of promoting certain technology models and certain energy policy schemes. The soft power analysis is very appropriate in the context of disputes over the desired model of energy policy and shaping public mood in the face of the energy crisis. It makes it possible to expose the agents of the dominant message, the type of arguments used by them, and also to study in what direction energy policy is developed, what social atmosphere is being built towards the energy models promoted by the state, and what social attitudes are shaped towards them under the influence of soft power mechanisms.

Reduction of the Risk of Inaccurate Prediction of Electricity Generation from PV Farms Using Machine Learning

Problems with inaccurate prediction of electricity generation from photovoltaic (PV) farms cause severe operational, technical, and financial risks, which seriously affect both their owners and grid operators. Proper prediction results are required for optimal planning the spinning reserve as well as managing inertia and frequency response in the case of contingency events. In this work, the impact of a number of meteorological parameters on PV electricity generation in Poland was analyzed using the Pearson coefficient. Furthermore, seven machine learning models using Lasso Regression, K–Nearest Neighbours Regression, Support Vector Regression, AdaBoosted Regression Tree, Gradient Boosted Regression Tree, Random Forest Regression, and Artificial Neural Network were developed to predict electricity generation from a 0.7 MW solar PV power plant in Poland. The models were evaluated using determination coefficient (R2), the mean absolute error (MAE), and root mean square error (RMSE). It was found out that horizontal global irradiation and water saturation deficit have a strong proportional relationship with the electricity generation from PV systems. All proposed machine learning models turned out to perform well in predicting electricity generation from the analyzed PV farm. Random Forest Regression was the most reliable and accurate model, as it received the highest R2 (0.94) and the lowest MAE (15.12 kWh) and RMSE (34.59 kWh).

Production and Evaluation of Synthetic Lightweight Aggregates Based on Mixture of Fluidized Bed Fly Ash and Post-Mining Residues.

This paper presents an attempt to obtain technically valuable lightweight aggregate produced from a mixture of fluidized bed fly ash and post-mining residues. The motivation to take up this study is a problem with the reasonable utilization of huge amounts of ashes produced by power plants in Poland. The ashes still produced and those stored in heaps amount to a tonnage of millions, and new ways to utilize them are desired. A real lack of mineral aggregates (non-renewable resources) demands the search for alternative materials. Using the industrial ashes as aggregates is a possible solution to the two above-mentioned problems. The aim of the study was to produce the lightweight aggregate components and to assess them in terms of their physical and mechanical properties. The components were prepared by mixing, granulation, and sintering at the temperature of over 1170 °C. Evaluation of physical parameters was based on parameters such as bulk density and water absorption. The study of mechanical properties was carried out on the basis of aggregates’ resistance to crushing. The obtained results revealed that using a mixture of the combustion and post-mining residues in the production of a lightweight aggregate is beneficial and results in the formation of a porous and durable structure. The measured resistance to the crushing of the produced aggregates varied from 5.9 MPa to 7.5 MPa. They also showed a high freeze-thaw resistance and good resistance to aggressive environments (bases, acids, salt). The registered properties indicate that the aggregates meet the basic requirements for materials used in construction and road-building. This study has a scientific and didactic value in that it describes the step-by-step process of planning and implementing the production of synthetic mineral aggregates.

Different design aspects of an Organic Rankine Cycle turbine for electricity production using a geothermal binary power plant

In recent years, pressure has been growing to increase the share of renewable energy sources in electricity generation, which may offer opportunities for the development of geothermal energy in regions that have been so far considered unprofitable in this respect. One such country currently undergoing an energy transition is Poland in which low-temperature geothermal resources are currently used for district heating and recreation purposes. Nevertheless, research on the possibilities of using geothermal energy for electricity production is ongoing. The objective of this paper was to perform a comprehensive analysis of a binary power plant construction in relation to low-temperature petro-geothermal resources. The potential binary power plant is located in the area characterized by temperature of 120 °C at depths of 5000 m. About half of Poland’s area, especially the regions of western and central Poland, has these characteristics. It was assumed that brine at volume flow rate of 400 m3/h is a heat source for the Organic Rankine Cycle with isobutane as a working medium. The thermal efficiency based on the First Law of Thermodynamics and the power output were estimated at 10.5% and 1.79 MWe, respectively. In addition, the thermal efficiency based on the Second Law of Thermodynamics was calculated at 29.0%. For the calculated cycle parameters, a preliminary design of a two-stage axial turbine was constructed. All results were compared to the other binary power plants and they confirm that establishing the binary power plant in Poland would be thermodynamically justified. The main novelty of the present work is the combination of three issues, namely the selection of the low- temperature heat source, the design and analysis of the cycle together with a turbine adapted to these conditions.

Foamed Geopolymer Composites with the Addition of Glass Wool Waste.

This study examines foamed geopolymer composites based on fly ash from the Skawina coal-fired power plant in Poland. The paper presents the effect of adding 3% and 5% by weight of glass wool waste on selected properties of foamed geopolymers. The scope of the tests carried out included density measurements, compressive and bending strength tests, measurements of the heat conduction coefficient, and the results of measurements of changes in thermal radiation in samples subjected to a temperature of 800 °C. The obtained results indicate that glass wool waste can be successfully used to lower the density and heat conduction coefficient of foamed geopolymer composites with a fly ash matrix. In addition, the results of changes in thermal radiation in the samples subjected to the temperature of 800 °C showed a positive effect of the addition of glass wool waste. Moreover, the introduction of the addition of glass wool waste made it possible to increase the compressive strength of the examined foamed geopolymers. For the material modified with 3% by weight of mineral wool, the increase in compressive strength was about 10%, and the increase in fibers in the amount of 5% by weight resulted in an increase of 20% concerning the base material. The obtained results seem promising for future applications. Such materials can be used in technical constructions as thermal insulation materials.

Dynamics of Electricity Production against the Backdrop of Climate Change: A Case Study of Hydropower Plants in Poland

Renewable energy sources (RES) play an important role in the European Union’s energy sector as a result of the energy policy framework adopted. Its share in the final energy consumption varies depending on the country and the adopted energy policy. The article presents the structure of electricity production from renewable energy sources in Poland in the years 2002–2019. It was found that the share of energy production from hydroelectric power plants in Poland in relation to the amount of energy produced from renewable energy sources in the analyzed years has strongly decreased. The reason for this state was an increase in the production of energy coming from wind and biomass energy combined with an increase in subsidies for these energy producers. Additionally, unstable hydrological conditions, mainly low river flows, may be the reason for the low share of energy produced in power plants. As a case study, data for five small hydropower plants (SHP) located on the Gwda river (north-western Poland) were analyzed. Electricity production volumes were analyzed depending on the size of the Gwda river flow. It was found that the lower amount of electricity produced at SHPs on the Gwda river is mainly due to lower flows in the river. In the future, unstable electricity production from renewable energy sources may have a significant impact on achieving Poland’s energy targets in 2030.

Possibility of using alternative fuels in Polish power plants in the context of mercury emissions

The progressive decarbonisation of industry is leading to a reduction in coal consumption and the substitution for coal with other types of fuels, including waste-derived alternative fuels. These fuels are characterised by high variation in the content of highly toxic mercury. Co-combustion with coal can cause significant emissions, exceeding mercury emission limits. Various alternative fuels (refuse-derived fuel (RDF), waste paper, textiles, plastics, film, tires and their char, and sewage sludge) were examined for mercury content. The mercury content in analysed alternative fuels ranged from 0.4 to 92.0 µg Hg/MJ, with an average of 17.7 µg Hg/MJ. The fuels with the highest mercury content were RDFs (2.0–79.3 µg Hg/MJ) and sewage sludge (42.3–92.0 µg Hg/MJ). An acceptable amount of RDF added to hard coal which would remain within the emission limits was estimated to be 9–24% of the chemical energy in the blend. For sewage sludge, this amount was estimated to be 5–13%. For brown coal, with a much higher mercury content than hard coal, co-combustion with alternative fuels has a positive effect on reducing mercury emissions. It is possible to meet the mercury emission limits with a 95% contribution of the chemical energy coming from RDF. The blending of various types of waste supported by mild pyrolysis of high-mercury waste allows alternative fuels with relatively low mercury content to be produced. Such fuels may contribute a reduction in mercury emissions from coal-fired power plants in Poland.

Performance evaluation of a supercritical circulating fluidized bed boiler for power generation under flexible operation

It is well known that the Łagisza power plant in Poland is the world’s first supercritical circulating fluidized bed (CFB) boiler, whose commercial operation started on June 2009. It has attracted a great deal of interest and operational data are publicly available, therefore it has been chosen as the object of the present study aimed at assessing load and fuel flexibility of supercritical CFB plants. First, the thermal cycle was modelled, by means of the commercial code Thermoflex®, at nominal and part load conditions for validation purposes. After having verified the validity of the applied modelling and simulation tool, the advantage of having supercritical steam combined with CFB boiler over subcritical steam and pulverized coal (PC) boiler, respectively, was quantified in terms of electric efficiency. As a next step, the designed fuel, i.e. locally mined hard coal, was replaced with biomass: 100% biomass firing was taken into account in the case of subcritical CFB boiler whereas the maximum share of biomass with coal was set at 50% with supercritical CFB boiler, consistently with the guidelines provided by the world leading manufacturers of CFB units. A broad range of biomass types was tested to conceive mixtures of fuel capable of preserving quite high performance, despite the energy consumption in pretreatment. However, the overall efficiency penalty, due to biomass co-firing, was found to potentially undermine the benefit of supercritical steam conditions compared to conventional subcritical power cycles. Indeed, the use of low-quality biomass in thermal power generation based on steam Rankine cycle may frustrate efforts to push the steam cycle boundaries.

Designing a Small Water Power Plant in Poland in the Aspect of Minimizing the Impact on River Ecosystem

A small hydro-power plant designing in aspect of current legislation is an interdisciplinary problem because of the fact that efficiency priority is not so important as ecological one. In this article the regulations concerning permissions for plant operation are discussed. The small hydro-power plant designing criteria are presented in the aspect of a plant impact on the river ecosystem.

Distribution of Some Ecotoxic Elements in Fuel and Solid Combustion Residues in Poland

The purpose of this paper is to assess the content and distribution of some elements in coal from two bituminous coal basins and in fly ash and slag derived from combustion of the coals in six power plants in Poland. The petrographic composition and distribution of elements were characterized in the tested samples, using reflected light microscope, X-ray powder diffractometer, inductively coupled plasma atomic emission spectroscopy, and scanning electron microscope with energy dispersive X-ray. The highest content of elements in coal occurs in siderite. In Al-Si particles, as well as in magnetite with skeletal and dendritic structure crystallized on the surface of Al-Si microspheres or cenospheres included in fly ash size < 0.05 mm and in the magnetic fraction of slag, the highest content of elements was noted. Due to the content of elements, fly ash and slag were considered to be neutral for the soil environment. Correlations, which have not been described before, have been observed between the likely mode of binding of some elements in coal and their distribution in fly ash and slag. These correlations could be of particular value when predicting the content and distribution of elements in combustion residues and in the assessment of their environmental toxicity.

Pilot plant initial results for the methanation process using CO2 from amine scrubbing at the Łaziska power plant in Poland

This article presents preliminary results of the methanation process using CO2 from amine scrubbing. The studies were carried out at the CO2-SNG pilot plant. The installation was built by TAURON Wytwarzanie S.A. at the Łaziska Power Plant in Poland. After the commissioning, the Institute for Chemical Processing of Coal (IChPW) was responsible for conducting research. Synthetic methane (SNG) is produced by the reaction of CO2 captured from flue gas (using amine absorption) with H2 obtained from water electrolysis. The methanation reaction takes place in a two-stage catalytic reactor. After the compression the SNG could be used as a fuel for internal combustion engines (CNG). This paper describes in detail the construction of the pilot plant as well as the guidelines for the methanation process. Furthermore, the impact of process gas flow, reactor temperature and system pressure on the conversion of CO2 to methane is presented. The tests were carried out at process gas flows in the range of 9.9–23.0 m3N/h, at pressures of 1.5–3.0 bara and temperatures of 280–350 °C. The maximum obtained CO2 conversion was 98%. The produced SNG consisted of about 82% of methane, 13% of hydrogen and 5% of CO2.