Peak Power Research Articles

Validity of the Hawkin Dynamics Wireless Dual Force Platform System Against a Piezoelectric Laboratory Grade System for Vertical Countermovement Jump Variables.

Dos'Santos, T, Evans, DT, and Read, DB. Validity of the Hawkin dynamics wireless dual force platform system against a piezoelectric laboratory grade system for vertical countermovement jump variables. J Strength Cond Res 38(6): 1144-1148, 2024-The aim of this study was to determine the criterion validity of the Hawkin Dynamics (HD) wireless dual force platform system for assessing vertical countermovement jump (CMJ) variables, compared with those derived from a Kistler piezoelectric laboratory grade force platform system. During a single testing session, HD force platforms were placed directly on top of 2 adjacent Kistler force platforms to simultaneously collect vertical ground reaction forces produced by 2 male recreational soccer players (age: 29.0 ± 2.8 years, height: 1.79 ± 0.01 m, mass: 85.6 ± 4.7 kg) that performed 25 vertical CMJs each. Sixteen vertical CMJ variables pertaining to jump height (JH), flight time (FT), time-to-take off (TTT), countermovement depth, body weight (BW), propulsive and braking mean, and peak powers, forces, and impulses were compared between systems. Fixed bias was observed for 6 of 16 variables (peak and mean braking power, mean propulsion force, TTT, FT, and BW), while proportional bias was present for 10 of 16 variables (peak and mean propulsive and braking force, TTT, FT, peak and mean braking power, mean propulsive power, and BW). For all variables regardless of fixed or proportional bias, percentage differences were ≤3.4% between force platform systems, with near perfect to perfect correlations (r or ρ = 0.977-1.000) observed for 15 of 16 variables. The HD dual wireless force platform system can be considered a valid alternative to a piezoelectric laboratory grade force platform system for the collection of vertical CMJ variables, particularly outcome (i.e., JH, reactive strength index modified) and strategy variables (countermovement depth).

Physical Profiles of All-Rounders, Batters, and Bowlers in Sub-Elite Women's Cricket.

Jacobs, J, Olivier, B, Brandt, C, and Jafta, G. Physical profiles of all-rounders, batters, and bowlers in sub-elite women's cricket. J Strength Cond Res 38(6): 1095-1102, 2024-The unique physical profile of each player's role in sub-elite women's cricket is vital for optimizing performance as these players progress to the elite levels. This quantitative, cross-sectional study investigates the physical profiles of sub-elite women's cricket players as a group and compares these profiles across different player roles. Sub-elite female cricket players in the South African domestic women's cricket league were included in this study. A battery of physical assessments were conducted at the start of the 2022/23 season. The physical assessments included body composition, individual muscle strength testing using dynamometry, 2-km time trial (TT), countermovement jump (CMJ), single-leg jump (SLJ), isometric mid-thigh pull, push-up, and hop test on force plates. A total of 44 female players (20.86 ± 1.6 years) were included in the study. Differences were found in muscle mass (p = 0.004) and peak power (p = 0.040) for all-rounders and bowlers. Player roles presented with different dominant (p = 0.006) and non-dominant (p = 0.066) knee flexion strength. The bowlers' body composition and physical strength profile are compromised compared with batters and all-rounders. There were several physical strength and power differences between pace and spin bowlers in CMJ and SLJ tests for jump height (p = 0.009) and peak power (p = 0.006). Batters performed the best in the 2-km TT. Body composition and musculoskeletal profiles for each player role can be baseline markers in sub-elite women's cricket. Stakeholders can use this information to guide physical preparation for players advancing to elite levels.

Self-similarity of rogue wave generation in gyrotrons: Beyond the Peregrine breather

Within the framework of numerical simulations, we study the gyrotron dynamics under conditions of a significant excess of the operating current over the starting value, when the generation of electromagnetic pulses with anomalously large amplitudes (“rogue waves”) can be realized. The averaged shape of high-power pulses is shown to be very close to the celebrated Peregrine breather. At the same time, we demonstrate that the relation between peak power and duration of rogue waves is self-similar, but does not reproduce the one characteristic for Peregrine breathers. Remarkably, the discovered self-similar relation corresponds to the exponential nonlinearity of an equivalent Schrödinger-like evolution equation. This interpretation can be used as a theoretical basis for explaining the giant amplitudes of gyrotron rogue waves.

Optimal Prescription for Superior Outcomes: A Comparative Analysis of Inter-Individual Variability in Adaptations to Small-Sided Games and Short Sprint Interval Training in Young Basketball Players

This study compared the inter-individual variability in adaptive responses to six weeks of small-sided games (SSG) and short sprint interval training (sSIT) in young basketball players. Thirty well-trained young athletes (age: 16.4 ± 0.6 years; stature: 190 ± 8.4 cm; weight: 84.1 ± 8.2 kg) voluntarily participated and were randomly assigned to SSG (3 sets of 5 min 3v3 on full length (28 m) and half-width (7.5 m) court, with 2 minutes of passive recovery in-between), sSIT (3 sets of 12 × 5 s sprinting with 20 s recovery between efforts and 2 min of rest between sets), or CON (routine basketball-specific technical and tactical drills) groups, each of ten. Before and after the training period, participants underwent a series of laboratory- and field-based measurements to evaluate their maximum oxygen uptake (V̇O2max), first and second ventilatory threshold (VT1 and VT2), oxygen pulse, peak and average power output (PPO and APO), linear speed, change of direction (COD), countermovement jump (CMJ), and vertical jump (VJ). Both SSG and sSIT sufficiently stimulated adaptive mechanisms involved in enhancement of the mentioned variables (p < 0.05). However, sSIT resulted in lower residuals in percent changes in V̇O2max (p = 0.02), O2pulse (p = 0.005), VT1 (p = 0.001), PPO (p = 0.03), and linear speed (p = 0.01) across athletes compared to the SSG. Moreover, sSIT resulted in more responders than SSG in V̇O2max (p = 0.02, φ = 0.500), O2pulse (p = 0.003, φ = 0.655), VT1 (p = 0.003, φ = 0.655), VT2 (p = 0.05, φ = 0.436), and linear speed (p = 0.05, φ = 0.420). Our results indicate that sSIT creates a more consistent level of mechanical and physiological stimulus than SSG, potentially leading to more similar adaptations across team members.

Novel effective spectrum broadening technology pumped by 2 μm picosecond laser for mid-infrared supercontinuum generation

Using thulium-doped fiber laser to pump fluoride fiber is one of the most common methods to generate mid-infrared supercontinuum (SC). But it is difficult to generate SC spectrum with wavelength more than 4 μm by directly pumping short fluoride fiber with 2 μm picosecond (ps) laser. Although some studies with SC exceeding 4 μm have also been reported, the proportion of spectral power in the long-wavelength region is not very high. To address this issue, a novel and simple approach to solve low peak power of 2 μm ps pump sources is introduced by adding a short piece of holmium-doped fiber. This method can make full use of the gain bandwidth of Ho3+ and soliton self-frequency shift effect to enhance soliton energy and promote spectral broadening. The effectiveness of the approach is verified by constructing a theoretical model to solve the generalized nonlinear Schrödinger equation. We demonstrate through simulations that addition of holmium-doped fiber can yield significantly improved output spectral range, power ratio in the long-wavelength region and optical–optical conversion efficiency compared to the previous technical. Especially, the implementation of the new technology can effectively expand the SC long-wavelength edge by ∼470 nm after applying a 3 dB gain, and can easily build a simple, compact and low-cost mid-infrared light source system.

Neuromechanical Differences between Pronated and Supinated Forearm Positions during Upper-Body Wingate Tests

Arm-cycling is a versatile exercise modality with applications in both athletic enhancement and rehabilitation, yet the influence of forearm orientation remains understudied. Thus, this study aimed to investigate the impact of forearm position on upper-body arm-cycling Wingate tests. Fourteen adult males (27.3 ± 5.8 years) underwent bilateral assessments of handgrip strength in standing and seated positions, followed by pronated and supinated forward arm-cycling Wingate tests. Electromyography (EMG) was recorded from five upper-extremity muscles, including anterior deltoid, triceps brachii lateral head, biceps brachii, latissimus dorsi, and brachioradialis. Simultaneously, bilateral normal and propulsion forces were measured at the pedal-crank interface. Rate of perceived exertion (RPE), power output, and fatigue index were recorded post-test. The results showed that a pronated forearm position provided significantly (p < 0.05) higher normal and propulsion forces and triceps brachii muscle activation patterns during arm-cycling. No significant difference in RPE was observed between forearm positions (p = 0.17). A positive correlation was found between seated handgrip strength and peak power output during the Wingate test while pronated (dominant: p = 0.01, r = 0.55; non-dominant: p = 0.03, r = 0.49) and supinated (dominant: p = 0.03, r = 0.51; don-dominant: p = 0.04, r = 0.47). Fatigue changed the force and EMG profile during the Wingate test. In conclusion, this study enhances our understanding of forearm position's impact on upper-body Wingate tests. These findings have implications for optimizing training and performance strategies in individuals using arm-cycling for athletic enhancement and rehabilitation.

Assessment of Power Quality Enhancement in a Grid-tied PV Network via ANN-based UPQC

Background: Microgrid is the recent decade terminology that surpasses the long-run issues associated with the public and utility grids. Among the renewable energy sources, solar PV units have gained greater importance owing to their huge potential availability and laidback operating characteristics on technological grounds. Conversely, it offers pollution-free electricity and perhaps the dependability is volatile in most situations. The literature study accumulates the foresaid setback and presents the fluctuation-less and controlled standard quality of power outputs. Objective: The aim of this particular research is to propose an assessment of Power Quality enhancement in a Grid-tied photovoltaic (PV) network via ANN-based UPQC. The novel idea behind this proposed approach is the UPQC component which deliberately regulates and controls the power system to achieve higher levels of power quality, ultimately meeting the recent IEEE standards. Method: This particular research enhances the performances of UPQC employed in the microgrid unit by replacing the traditional PI controller with a multi-layered feed-forward-type ANN controller for the current regulation of the series active filter. Additionally, a training algorithm for the ANN controller is built, trained and simulated via MATLAB/Simulink platform. The ANN-based UPQC is proposed to alleviate the power quality challenges like sag and swell in voltage, harmonic distortion, the time required for voltage compensation, and power factor. Therefore, UPQC is equipped to enrich the standard of power transfer at the point of common coupling inside the power frameworks, respectively. Result: Finally, the simulation results are presented to validate the operation of the grid-tied PV network via an ANN-based UPQC system. To show the enriched performance of the proposed topology, a comparative analysis is made with PI controller-based UPQC, and outcomes infer to be in agreement with the theoretical discussions. Also, the ANN-based proposed approach reduces the restoration time and THD as well under both sag and swell conditions, respectively. Conclusion: In this articulated work, a PV power system network with a DC-DC converter and three-phase inverter is employed for grid integration. The peak power extraction is ensured via a DC-DC converter with an incremental conductance algorithm. Both UPQCs are analysed and experimented via MATLAB/Simulink platform with inconstant nonlinear loads to investigate the indices mentioned above and corroborate the same within the operating regions.

No Sex Differences in Perceptual Responses to High-Intensity Interval Training or Sprint Interval Training.

Coe, LN and Astorino, TA. No sex differences in perceptual responses to high-intensity interval training or sprint interval training. J Strength Cond Res 36(6): 1025-1032, 2024-High-intensity interval training (HIIT) elicits similar and, in some cases, superior benefits vs. moderate-intensity continuous training (MICT). However, HIIT is typically more aversive than MICT because of the higher intensity and in turn, greater blood lactate accumulation (BLa). This study explored potential sex differences in perceptual responses to acute HIIT and sprint interval training. Fifteen men (age and V̇O2max = 29 ± 8 years and 39 ± 3 ml·kg-1·min-1) and 13 women (age and V̇O2max = 22 ± 2 years and 38 ± 5 ml·kg-1·min-1) who are healthy and recreationally active initially underwent testing of maximal oxygen uptake (V̇O2max) on a cycle ergometer. In randomized order on 3 separate occasions, they performed the 10 × 1-minute protocol at 85% of peak power output, 4 × 4-minute protocol at 85-95% maximal heart rate (%HRmax), or reduced exertion high intensity interval training consisting of 2 "all-out" 20-second sprints at a load equal to 5% body mass. Before and throughout each protocol, rating of perceived exertion (rating of perceived exertion [RPE] 6-20 scale), affective valence (+5 to -5 of the Feeling Scale), and BLa were assessed. Five minutes postexercise, enjoyment was measured using the Physical Activity Enjoyment scale survey. Results showed no difference in RPE (p = 0.17), affective valence (0.27), or enjoyment (p = 0.52) between men and women. Blood lactate accumulation increased in response to all protocols (p < 0.001), and men showed higher BLa than women (p = 0.03). Previous research suggests that interval exercise protocols are not interchangeable between men and women, yet our data reveal that men and women having similar V̇O2max exhibit no differences in perceptual responses to interval exercise.

A regulatory power split strategy for energy management with battery and ultracapacitor

Electric vehicle batteries face fast degradation due to the high frequency of charging/discharging cycles and great peak power demands. Lifetime, continuity of supply and power density of these batteries affect the performance of electric vehicles (EVs). Hybrid energy storage systems (HESS) offers a feasible solution by incorporating other energy storage elements like ultra-capacitor (UC) along with battery. Their combination provides higher efficiency and better performance in terms energy/power density. UC can behave like a power buffer when the EV is accelerating and regenerating. The HESS needs a controller that can split the available power between different sub systems as per demand. This paper presents a regulatory control strategy useful in HESS with battery and UC for the speed regulation of a brushless DC (BLDC) motor using a 3-port bidirectional DC-DC converter. The regulatory control strategy monitors the state of charge (SOC) of UC and a fuzzy logic controller regulates the power flow between HESS and the motor. Simulation in MATLAB validates the efficacy of the strategy. Simulation results and hardware evaluation confirm that the regulatory control scheme is effective in splitting the available power according to the load demand and achieves better energy efficiency.

Coherent beam combining of two all-PM thulium-doped fiber chirped pulse amplifiers

In this paper, we report a coherent beam combining (CBC) system that involves two thulium-doped all-polarization maintaining (PM) fiber chirped pulse amplifiers. Through phase-locking the two channels via a fiber stretcher by using the stochastic parallel gradient descent (SPGD) algorithm, a maximum average power of 265 W is obtained, with a CBC efficiency of 81% and a residual phase error of λ/17. After de-chirping by a pair of diffraction gratings, the duration of the combined laser pulse is compressed to 690 fs. Taking into account the compression efficiency of 90% and the main peak energy proportion of 91%, the corresponding peak power is calculated to be 4 MW. The laser noise characteristics before and after CBC are examined, and the results indicate that the CBC would degrade the low frequency relative intensity noise (RIN), of which the integration is 1.74% in [100 Hz, 2 MHz] at the maximum combined output power. In addition, the effects of the nonlinear spectrum broadening during chirped pulse amplification on the CBC efficiency are also investigated, showing that a higher extent of pulse stretching is effective in alleviating the spectrum broadening and realizing a higher output power with decent combining efficiency.Graphical

High specific capacity microfluidic Al-air battery with the double-side reactive anode

The cotton-based microfluidic Al-air batteries automatically deliver the electrolyte by the capillary force, available as the power supply for microelectronic devices. However, among these Al-air batteries, only one side of the Al anode participates in anodic reactions, wasting the anode and decreasing the anodic utility. To address the issues and gain a compact battery, the cotton-based Al-air battery with the double-side reactive anode is presented. It is comprised of the two air-breathing cathodes, two cotton channels and one anode. This battery shows a high specific capacity of 2856 mA h g−1 at 10 mA cm−2 current density, corresponding to the anodic utility of 95.8 %. At 3.5 mg cm−2 catalyst loading and 4 mol L−1 NaOH, the battery performance is optimal, with the peak power density of 28.0 ± 0.1 mW cm−2 and the limiting current density of 81.0 ± 4.1 mA cm−2. To further simplify the battery, the electrolyte container and absorbent pad are removed, and the electrolyte is non-flowing. The peak power densities of the batteries with or without the flowing electrolytes are almost the same. Finally, the stacks connected from the two batteries in series with and without the flowing electrolytes can light 63 and 50 light-emitting diodes.

Integrating Aperiodic 3D Porous Electrodes into 3D Batteries through Spray‐Deposited Polymer Electrolytes

AbstractDue to their exceptional energy and power densities, 3D micro‐batteries emerge as highly promising candidates for miniaturized power sources. However, fabricating a complete and uniform electrolyte/separator membrane to separate 3D electrodes in assembled 3D batteries remains a significant challenge. Herein, the study presents a straightforward approach to preparing 3D electrolyte membranes via a modified spray‐deposition method. This 3D electrolyte membrane effectively isolates the 3D porous LiFePO4 cathode from the Li anode with a ionic conductivity of 9.6 × 10−4 S cm−1, facilitating the creation of an integrated aperiodic 3D battery. The 3D battery exhibits a specific capacity of up to 8.8 mAh cm−2 (29.1 mWh cm−2) and attains a maximum power density of 12.7 mW cm−2. The characteristic time is 0.17 s for 3D battery while 0.73 s for traditional 2D batteries. The enhanced rate performance with thick electrode is primarily attributed to the reduced ionic diffusion pathway. These results represent the highest peak power and energy density among all reported aperiodic 3D batteries. The utilization of spray‐deposited electrolytes for 3D electrode separation promises significant advancements in developing 3D batteries and demonstrates great potentials for practical applications.

The impact of high-intensity arm crank exercise on reaction time in wheelchair fencers: gender differences and mechanical predictors

To achieve high performance, wheelchair fencing (WF) athletes are required to exhibit good physiological and timing indicators. The main aims of this study were to assess the relationship between the results of the repeated sprint ability (RSA) test and reaction time (RT) in WF, and to evaluate changes in RT after repeated high-intensity sprints in the group of an international-level WF athletes. This experimental study involved 18 athletes (aged 34.6 ± 7.70) from the Paralympic WF team. To establish the impact of fatigue on psychomotor capacity, the participants undergo a series of tests. At the beginning of the study, first reaction time (RT1) was measured. Afterwards, the RSA test was performed using the arm crank ergometer to evaluate the participants’ repeated sprint ability. Immediately after RSA, the second reaction time (RT2) was measured. Statistical analysis revealed moderate correlations between the RT2 and total work, decrease of work (DW), highest peak power, mean peak power, and highest peak power/kg, but these correlations were not statistically significant (p > 0.05). All fencers achieved a significantly shorter average RT2 (p < 0.005) after the RSA test (0.383 ± 0.035 s) than before the test (0.391 ± 0.038 s). Additionally, RT2 was significantly shorter than RT1 in the women's group (p < 0.001). Moreover, males had significantly greater values of repeated sprint ability parameters: highest work, total work, decrease of work and highest peak power (p < 0.05) than females. To conclude, repeated high-intensity arm crank exercise has a positive impact on simple postexercise cognitive tasks in WF fencers, especially in women, and leads to a decrease in RT. The RSA parameters can be predictors of changes in RT in men and women wheelchair fencers.

Synergistic Bulk and Surface Engineering for Expeditious and Durable Reversible Protonic Ceramic Electrochemical Cells Air Electrode.

Reversible protonic ceramic electrochemical cells (R-PCECs) offer the potential for high-efficiency power generation and green hydrogen production at intermediate temperatures. However, the commercial viability of R-PCECs is hampered by the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) within conventional air electrodes operating at reduced temperatures. To address this challenge, we introduce a novel approach based on the simultaneous optimization of bulk-phase metal-oxygen bonds and in-situ formation of a metal oxide nano-catalyst surface modification. This strategy is designed to expedite the ORR/OER electrocatalytic activity of air electrodes exhibiting triple (O2-, H+, e-) conductivity. Specifically, our engineered air electrode nanocomposite-Ba(Co0.4Fe0.4Zr0.1Y0.1)0.95Ni0.05F0.1O2.9-δ demonstrates remarkable ORR/OER catalytic activity and exceptional durability in R-PCECs. This is evidenced by significantly improved peak power density from 626mW cm-2 to 996mW cm-2 and highly stable reversibility over a 100-hour cycling period. This research offers a rational design strategy to achieve high-performance R-PCEC air electrodes with superior operational activity and stability for efficient and sustainable energy conversion and storage. This article is protected by copyright. All rights reserved.

Changes in Countermovement Vertical Jump Force-Time Metrics Across Different Competitive Levels in Women’s Volleyball

As one of the most fundamental skills in volleyball, the countermovement vertical jump (CVJ) has been commonly implemented as a non-invasive and time-efficient method for the assessment of lower-body neuromuscular function. The purpose of the present study was to examine differences in CVJ performance between three different competitive levels in female volleyball players (i.e., national team [n=20], professional league [n=16], collegiate [n=16]). While standing on a uni-axial force plate system sampling at 1000 Hz, athletes performed three maximal-effort CVJs with no arm swing (i.e., hands on the hips during the entire movement). Each jump was separated by a 10-15 second rest interval to minimize the possible influence of fatigue. Significantly greater eccentric braking impulse, peak velocity, peak force, mean and peak power, vertical jump height, reactive strength index-modified, countermovement depth, and shorter braking phase, eccentric duration, and contraction times were observed for the national team and professional players when compared to collegiate athletes. Also, national team players demonstrated significantly greater eccentric braking impulse, peak velocity, mean and peak power, reactive strength index-modified, and countermovement depth than professional volleyball players. However, during the concentric phase of the CVJ, the only significant differences observed were between national team players and collegiate athletes, where national team players exhibited significantly greater peak velocity, impulse, and mean and peak power. Thus, it can be concluded that higher-level players may be more capable of effectively utilizing the eccentric phase of the CVJ and executing the stretch-shortening action more rapidly, which contributes to better CVJ height.

High-energy, high-peak-power diode-pumped Q-switched Tm:YAG laser at 2.02 μm with tunable repetition rate from 100 Hz to 1000 Hz

A high-energy, high-peak-power Q-switched Tm:YAG laser at 2.02 μm with a tunable repetition rate from 100 Hz to 1000 Hz and pulse duration in the hundreds of nanoseconds is demonstrated. The high energy output was achieved by employing a thermally stable linear cavity, including two compact laser diode continuous-wave side-pumped Tm:YAG laser modules. For Q-switched operation, stable Q-switched performance from 100 Hz to 1000 Hz was realized at near-room temperature. At a repetition rate of 100 Hz, the laser delivered a maximum pulse energy of 215 mJ with a pulse duration of 124.4 ns, resulting in a peak power of up to 1.73 MW. When the repetition rate was tuned to 200 Hz, 500 Hz, and 1000 Hz, pulse energies of 212 mJ, 125.6 mJ, and 68.2 mJ were obtained, with pulse durations of 133.6 ns, 176.3 ns, and 262 ns, respectively. To the best of our knowledge, these results represent the highest single pulse energies and peak powers ever accomplished for a diode-pumped Q-switched Tm-doped 2 μm laser operating at high repetition rates exceeding 100 Hz.

Establishing equivalent circuits of mounted, high-power VCSEL arrays for iToF cameras

Solid-state indirect time-of-flight (iToF) cameras are crucial to numerous short-to-medium-range applications, owing to their advantages in terms of system integrability and long-term reliability. However, due to the low light intensity, the sensing range of iToF cameras is generally limited to a few meters, which hinders their wide applications. Further increasing the sensing range requires not only higher-power laser diodes but also well-designed driver circuits, which are based on prior knowledge of the laser diodes’ equivalent circuits (ECs). However, experimental studies on ECs of a mounted, high-power vertical-cavity surface-emitting laser (VCSEL) array that comprehensively incorporates all parasitic components, especially parasitic stemming from printed circuit boards (PCBs), remain absent. In this Letter, an 850 nm VCSEL array with a 15.3 W peak power and a 581 MHz bandwidth is fabricated, and more importantly, its EC is experimentally established. Leveraging the accurate EC, a compact iToF camera with a sensing range up to 11.50 m is designed. In addition, a modified precision model is proposed to better evaluate the iToF camera’s performance.

High-power electrically pumped terahertz topological laser based on a surface metallic Dirac-vortex cavity

Topological lasers (TLs) have attracted widespread attention due to their mode robustness against perturbations or defects. Among them, electrically pumped TLs have gained extensive research interest due to their advantages of compact size and easy integration. Nevertheless, limited studies on electrically pumped TLs have been reported in the terahertz (THz) and telecom wavelength ranges with relatively low output powers, causing a wide gap between practical applications. Here, we introduce a surface metallic Dirac-vortex cavity (SMDC) design to solve the difficulty of increasing power for electrically pumped TLs in the THz spectral range. Due to the strong coupling between the SMDC and the active region, robust 2D topological defect lasing modes are obtained. More importantly, enough gain and large radiative efficiency provided by the SMDC bring in the increase of the output power to a maximum peak power of 150 mW which demonstrates the practical application potential of electrically pumped TLs.

Spectroscopy and efficient dual-wavelength laser performances of a Nd:GYSAG crystal

We reported on the spectral properties and dual-wavelength laser performances of a novel, to the best of our knowledge, Nd:Gd1.8Y1.2ScAl4O12 (Nd:GYSAG) crystal for the first time. The absorption spectra, emission spectra, and fluorescence lifetime were systematically investigated. Further, a continuous-wavelength (CW) laser output power up to 5.02 W was obtained under an absorbed pump power of 9.45 W with slope and optical-to-optical efficiencies of 59.4% and 53.1%, respectively, at 1061.2 and 1063.2 nm. A stable passively Q-switched (PQS) laser employing Cr:YAG as a saturable absorber (SA) was realized. The maximum average output power of 0.756 W with a slope of near 34.4% was obtained with the pulse width, pulse energy, and peak power of 14.0 ns, 128.1 µJ, and 9.15 kW, respectively. The results indicate that the Nd:GYSAG crystal is an excellent laser medium for generating a high-efficiency dual-wavelength laser and has potential in terahertz (THz) laser generation.

Numerical Study on Effect of Flow Field Configuration on Air-Breathing Proton Exchange Membrane Fuel Stacks

Air-breathing proton exchange membrane fuel cells (PEMFCs) show enormous potential in small and portable applications because of their brief construction time without the need for gas supply, humidification and cooling devices. In the current work, a 3D multiphase model of single air-breathing PEMFCs is developed by considering the contact resistance between the gas diffusion layer and bipolar plate and the anisotropic thermal conduction and electric conductive in the through-plane and in-plane directions. The 3D model presents good grid independence and agreement with the experimental polarization curve. The single PEMFC with the best open area ratio of 55% achieves the maximum peak power density of 179.3 mW cm−2. For the fuel cell stack with 10 single fuel cells, the application of the anode window flow field is beneficial to improve the stack peak power density compared to the anode serpentine flow field. The developed model is capable of providing assistance in designing high-performance air-breathing PEMFC stacks.