Phosphor Powders Research Articles

Human Supplementation with AM3, Spermidine, and Hesperidin Enhances Immune Function, Decreases Biological Age, and Improves Oxidative-Inflammatory State: A Randomized Controlled Trial.

The positive effect of AM3, spermidine, and hesperidin, which have antioxidant and anti-inflammatory properties, on immunity is known, but their effect on the rate of aging, known as biological age (BA), is unclear. This work aims to test if the intake of a blend of AM3 (150 mg), spermidine (0.6 mg), and hesperidin (50 mg) for 2 months could decrease BA and improve immunity, redox, and inflammatory states. For this, 41 participants (30-63 years) were randomly divided into placebo and supplement groups. The supplement group took two capsules daily with AM3, spermidine, and hesperidin for two months, while the placebo group took capsules containing only calcium phosphate and talcum powder. Before and after the treatment, peripheral blood was collected. Immune function was assessed in leukocytes, redox state in whole-blood cells, erythrocytes, and plasma, and cytokine concentration in both mononuclear cell cultures and plasma. Finally, the Immunity Clock model was applied to determine BA. The results show that the intake of this blend improves the immune functions that constitute the Immunity Clock, decreasing BA by 11 years and reducing the oxidative-inflammatory state of the participants. Therefore, this supplement can be proposed as a strategy to rejuvenate BA and achieve healthy aging.

Gelatinolytic activity in dentin upon adhesive treatment

In this multi-parameter study, the effect of diverse factors related to adhesive application on the activation of host-derived gelatinases was investigated by gelatin zymography, in-situ zymography, fluorogenic DQ-gelatin assay and micro-tensile bond-strength (μTBS) testing. Gelatin zymography disclosed the presence of gelatinases in phosphoric acid-etched dentin powder, while two gold-standard adhesives generated no measurable MMP activation. In-situ zymography revealed that the interfacial gelatinolytic activity from specimens treated with the two adhesives appeared similar as that of the EDTA negative control, indicating no detectable gelatinases were activated upon adhesive treatment. In solution, MMP-2/9 activity significantly decreased upon interaction with both adhesives (two-way linear mixed effects model [LMEM]: p < 0.05); gelatinases were almost completely deactivated upon 1-week incubation at 37 °C (general linear model: p < 0.05); light-curing adhesives increased temperature up to 55 °C, which appeared sufficient to dramatically decrease MMP-2/9 activity (two-way ANOVA: p < 0.05). Finally, challenging adhesive-dentin interfaces with highly concentrated MMP-9 (at a much higher concentration than present in saliva) for 1 m did not significantly affect μTBS (two-way LMEM: p > 0.05). Taken together, the two adhesives did not activate but rather inhibited the release and activation of dentinal gelatinases.

Hydrogen Bond‐Induced Flexible and Twisted Self‐Assembly of Functionalized Carbon Dots with Customized‐Color Circularly Polarized Luminescence

AbstractCircularly polarized luminescence (CPL) has numerous applications in optical data storage, quantum computing, bioresponsive imaging, liquid crystal displays, and backlights in three‐dimensional (3D) displays. In addition to their competitive optical properties, carbon dots (CDs) benefit from simple and low‐cost preparation, facile post‐modification, and excellent resistance to photo‐ and chemical bleaching after carbonization. Combining the superior optical performance with polarization peculiarities through hierarchical structure engineering is imperative for the development of CDs. In this study, hydrophobic interactions of aromatic ligands, which participate in the surface‐ligand post‐modification process on the ground‐state chiral carbon core, are employed to drive the oriented assembly. Furthermore, the residual chiral amides on CDs form multiple hydrogen bonds during gradual aggregation, causing the assembled materials to form an asymmetric bending structure. Superficial ligands interfere with the optical dynamics of the exciton radiation transition and stabilize the excited state of the assembled materials to achieve a circularly polarized signal. The linkage ligands overcome the frequent aggregation‐induced quenching phenomenon that present difficulties in conventional CDs, facilitate the assembly of self‐supporting films, and improve chiral optical expression. The full‐color and white CPL are manipulated by simply adjusting the functional groups of the ligands, which also illustrates the versatility of the post‐modification strategy. Finally, large chiral flexible films and multicolor chiral light‐emitting diodes based on the stable chiral powder phosphors were constructed, thereby providing feasible materials and technical support for flexible 3D displays.

Luminescence Properties of Cs&lt;sub&gt;3&lt;/sub&gt;Cu&lt;sub&gt;2&lt;/sub&gt;I&lt;sub&gt;5&lt;/sub&gt; Phosphors Powder with Solid State Method

The low-temperature solid-state method is utilized to prepare Cs3Cu2I5 phosphors powder by using the cesium iodide (CsI) and cuprous iodide (CuI) as the raw materials. The phase structures of samples were investigated by using X-ray spectrum and steady-state fluorescence spectrometer. The experimental results show that all of samples were crystallized in the orthorhombic structure with pnma space group at the annealing temperature of 100-400°C. Cs3Cu2I5 phosphors exhibits a strong blue photoluminescence emission with peak at 440nm under excitation at 310nm. With the increase of the annealing temperature in the range of 100-400°C, the photoluminescence quantum yield (PLQY) of Cs3Cu2I5 powder achieved the 79.95%. It is revealed that the prepared Cs3Cu2I5 powder phosphors potentially have the promising application in the blue light emitting materials.

High-quality temperature imaging of Li2TiO3: Mn4+ thin film based on time-resolved luminescence measurement

With the rapid progress and mass production of integrated electronic devices in micro and nanometer scale, it is urgent to develop a technology that can monitor surface temperature distribution of integrated device for the purpose of optimizing the device design. Herein, a thermometry based on time-resolved measurements of luminescence from Li2TiO3: Mn4+ was presented, which uses the ratio of integrated fluorescence intensities in two different time windows. The scheme significantly improves the relative sensitivity of temperature sensing, with maximum value reaching 5.81 % K−1 at 342 K. With the help of a fluorescence microscope and an intensified charge coupled device (ICCD), the scheme based on the time-resolved measurement of Li2TiO3: Mn4+ was successfully applied to the temperature imaging of nickel circuit surface. By comparing the performance of temperature imaging via powder phosphor with that via thin film, it can be found that the thin film can better reflect the true temperature distribution on the surface of nickel circuit. What’s more, the Li2TiO3: Mn4+ thin film also improves the resolution of the temperature imaging (δT=0.61 K). Therefore, it is significant to explore the temperature measurement scheme based on the time-resolved measurement of Li2TiO3: Mn4+ thin film for realizing high-quality temperature imaging.

Selective leaching of lithium from mixed spent lithium iron phosphate powder

In recent years, lithium iron phosphate (LFP) batteries have been widely used in the electric vehicle industry. The recycling of spent LFP will be propitious to conserving resources and alleviating the environmental risks it poses. In this study, a selective extraction method for lithium from spent LFP was proposed using nitric acid. Lithium leached into the liquid phase, while P and Fe remained in the leaching residue. Under the conditions of 120°C, HNO3/Li molar ratio of 2, and time of 2 h, the leaching efficiency of lithium reached 99.5 %, with a selectivity reaching 82.1 %. Initially, LFP was decomposed to liberate Li, Fe, and P in the liquid phase. Subsequently, ferrous ions were oxidized to trivalent, high-valent iron ions re-precipitated as FePO4·2 H2O. Thermodynamic calculations indicate that the temperature and pH value of the extraction system have significant influence on both the oxidation and reprecipitation steps. An imbalance of Fe/P ratio (<1) in the raw material hinders the selectivity of lithium extraction, and supplementing this portion of Fe can enhance the selectivity to over 90 %. Additionally, LiCO3 and anhydrous FePO4 were effectively regenerated from the leachate and residue. This study provides a novel approach for the recycling of spent LFP and probably contributes to the sustainability of the lithium ion battery industry.

Real-Time Characterization of Phosphate Powder With Microwave Sensor: Investigating the Impact of Temperature

Real-Time Characterization of Phosphate Powder With Microwave Sensor: Investigating the Impact of Temperature

Robust and orange-yellow-emitting Sr-rich polytypoid α-SiAlON (Sr3Si24Al6N40:Eu2+) phosphor for white LEDs

ABSTRACT Nitrides and oxynitrides isostructural to α-Si3N4 (M-α-SiAlON, M = Sr, Ca, Li) possess superb thermally stable photoluminescence (PL) properties, making them reliable phosphors for high-power solid-state lighting. However, the synthesis of phase-pure Sr-α-SiAlON still remains a great challenge and has only been reported for Sr below 1.35 at.% as the large size of Sr2+ ions tends to destabilize the α-SiAlON structure. Here, we succeeded to synthesize the single-phase powders of a unique ‘Sr-rich’ polytypoid α-SiAlON (Sr3Si24Al6N40:Eu2+) phosphor with three distinctive Sr/Eu luminescence sites using a solid-state remixing-reannealing process. The Sr content of this polytypoid structure exceeds those of a few previously reported structures by over 200%. The phase purity, composition, structure, and PL properties of this phosphor were investigated. A single phase can be obtained by firing the stoichiometric mixtures of all-nitride precursors at 2050°C under a 0.92 MPa N2 atmosphere. The Sr3Si24Al6N40:Eu2+ shows an intense orange-yellow emission, with the emission maximum of 590 nm and internal/external quantum efficiency of 66%/52% under 400 nm excitation. It also has a quite small thermal quenching, maintaining 93% emission intensity at 150°C. In comparison to Ca-α-SiAlON:Eu2+, this Sr counterpart shows superior quantum efficiency and thermal stability, enabling it to be an interesting orange-yellow down-conversion luminescent material for white LEDs. The experimental confirmation of the existence of such ‘Sr-rich’ SiAlON systems, in a single-phase powder form, paves the way for the design and synthesis of novel ‘Sr-rich’ SiAlON-based phosphor powders with unparalleled properties.

Effects of annealing temperature, doping concentration, and excitation wavelength on photoluminescence characteristics of GdOCl:Bi3+ phosphor powders

This study presents a novel investigation of the structure, particle morphology and photoluminescence (PL) characteristics of Gd1-xOCl:Bix phosphors prepared by a solid-state reaction method. X-ray diffraction data confirmed the formation of the tetrahedral GdOCl phase. The phosphors emitted peculiar photoluminescence that was dependent on the excitation wavelength, annealing temperature and doping concentration. When undoped GdOCl host was excited at 275 nm, a narrowband ultraviolet B (UVB) was observed at 315 nm. This emission is ascribed to the 8S7/2 → 6IJ transition of Gd3+. After doping with Bi3+, two excitation bands were observed at 275 nm (major excitation) and 336 nm (minor excitation). Exciting Bi3+ doped GdOCl at 275 and 366 nm resulted in two broad emission bands at 455 nm (bluish green) and 428 nm (blue) ascribed to and 3P0,1 → 1S0 transitions of Bi3+. The PL peak intensities of these emissions were found to vary with Bi3+ doping concentrations and annealing temperatures. The decay characteristics and photoluminescence quantum yield of the blue photoluminescence were determined, and the mechanism of the blue Bi3+ emission is proposed.

Enhanced fluorescence in Cs2ZnI4 powders by Cu doping

Cu+-doped metal halide Cs2ZnI4 phosphor powders were synthesized by a facile solid-state synthesis method. The introduction of Cu+ makes the weakly luminous Cs2ZnI4 emit stronger blue light around 450 nm. When the doping concentration is 5 %, the photoluminescence quantum yield (PLQY) is up to 17.76 %. This work provides a feasible strategy for the preparation of metal halide phosphors applied to blue-light-excitable LED devices, and also gives an insight into understanding self-trapped excitons (STEs) emission in zero-dimensional metal halides.

Tuning β-Si3Al3O3N5 phosphors by Eu or Ce doping for white light-emitting diodes (wLEDs)

SiAlON-based phosphors have garnered considerable attention in the field of white lighting owing to their excellent thermal stability, and rare earth doped SiAlON-based phosphors are expected to be used in a new generation of lighting sources. In this work, Eu2+ or Ce3+ doped Si3Al3O3N5 phosphors were synthesized by high temperature solid phase method. The microstructure of the phosphors exhibited irregular grain. The two phosphors exhibit green and cyan luminescence under 365 nm excitation, which are derived from the 5d-4f transitions of Eu2+ and Ce3+, respectively. The quenching concentrations are 3 % and 4 % for Eu2+ and Ce3+doped phosphors, respectively. The fluorescence intensity of Eu2+ and Ce3+ activated SiAlON powders decreased to 50 % of the room temperature intensity at 179 °C and 170 °C, respectively. The thermal activation energy values of the two phosphors were 0.35 eV, and the coordinate configuration diagram was constructed to comprehensively analyze the thermal quenching behavior of phosphors. Finally, the two phosphors powders were mixed with red and blue fluorophore to obtain white LEDs, showing low color temperature, high color rendering, high power unsaturation and long half-life. The SiAlON-based phosphors with excellent thermal stability obtained in this work achieve different wavelengths of luminescence in the green region. The results show that the β-Si3Al3O3N5 phosphor can be used as a candidate material for high-quality green light supplement for wLEDs.

DUV electroluminescence from Bi3+-doped bi-phase yttrium phosphate

Trivalent-doped tetragonal xenotime yttrium orthophosphate phosphors have attracted significant attention as promising materials for deep ultraviolet (DUV) luminescence. In this study, we achieved DUV electroluminescence (EL) using Bi3+-doped bi-phase yttrium phosphate (YPB) phosphor under an AC-driven sinusoidal waveform. Phosphor powder was synthesized via a solid-state reaction with an optimal Bi3+ concentration. The phosphor exhibited a mixed phase of xenotime tetragonal YPO4 and monoclinic Y(PO3). We suggest that the mixed phase within the phosphor particles plays a crucial role in enhancing light generation via a bipolar field emission mechanism in the developed powder-based EL device. It emitted a narrow-band DUV emission spectrum peaking at 243 nm, which was attributed to the 3P1 → 1S0 transition of the Bi3+ ions within the mixed host lattices. Moreover, it has a lower voltage application than the excimer lamp DUV sources. The application of the YPB phosphor in EL devices presents an appealing outlook for future advancements in the development of DUV sources.

An alternative approach for increasing the visibility of roads

Visibility problems occur on highways that are not sufficiently illuminated at night, endangering traffic safety. Phosphor material, which has a natural glow feature under ultraviolet (UV) light, is planned to increase road visibility in areas with inadequate lighting. Phosphor powder (PP) was used in four different percentages (25%, 50%, 75%, and 100%) as fillers in hot mix asphalt (HMA), reduced to filler size. Asphalt specimens were prepared using a super pave gyratory compactor and super pave volumetric mixture design. Compacted specimens were exposed to artificial 12V UV light for 10-minute intervals in a dark room, and UV light absorption was observed. Visibility analyses were performed on the specimens by taking high-resolution photos with long exposure from a distance of approximately 30 cm from the asphalt specimen using a professional camera. According to the analysis results, the visibility values increased by 200.4%, 378.5%, 538.1%, and 728.5% compared to the reference specimen for substitution rates of 25%, 50%, 75%, and 100%, respectively. Experiments were conducted to determine the behavior of the specimens prepared as phosphorus substitutes in the mixture. After selecting the optimum binder contents, the modified Lottman test procedure was applied to measure the specimens' strength values and moisture sensitivity prepared at optimum ratios. The indirect tensile test results show that the 25% PP-substituted specimen had a better strength value. The tensile strength ratio (TSR) value, the ratio of dry and wet tensile stresses, was determined to have minor moisture sensitivity in the 50% PP-substituted specimen. HWTT was applied to the specimen containing 50% PP content, which exhibited the best TSR ratio, resulting in improved rutting performance compared to the reference specimen.

The reactivity of α-tricalcium phosphate powders is affected by minute amounts of β-calcium pyrophosphate and by the synthesis temperature

α-tricalcium phosphate (α-TCP) is the most widespread raw material for hydraulic calcium phosphate cements (CPCs). CPCs are widely used in bone repair due to their injectability, setting ability, and osteoconductivity. This study investigated the reactivity of α-TCP powders, focusing on the impact of minor phase impurities, β-calcium pyrophosphate and hydroxyapatite, and the synthesis temperature. The α-TCP powders were synthesized via a solid-state reaction of calcium carbonate and anhydrous dicalcium phosphate, with varying Ca/P molar ratios (1.4850–1.5075) and synthesis temperatures (1175°C–1350 °C). Powders produced with a Ca/P molar ratio below 1.50 and synthesized at a temperature above the melting point of β-CPP (1296 °C) had a broader size distribution and a two to fourfold lower hydraulic reactivity. Conversely, a higher Ca/P molar ratio improved reactivity. The study underscores the importance of precise control over synthesis parameters to enhance the performance of α-TCP-based CPCs, offering insights for optimizing material design in biomedical applications.

Polymer-Based Hydroxyapatite-Silver Composite Resin with Enhanced Antibacterial Activity for Dental Applications.

The primary objective of this investigation was to synthesize a resin incorporating nanoparticles of hydroxyapatite and silver (HA-NpsAg) to enhance biocompatibility and antimicrobial efficacy, thereby facilitating potential implementation within the dental industry. These enhancements aim to ensure reliable, durable, functional, and aesthetically pleasing restorations while concurrently reducing susceptibility to bacterial colonization within the oral cavity. Hydroxyapatite powders were prepared using the sol-gel method and doped with silver nanoparticles obtained by chemical reduction. The crystalline amorphous calcium phosphate powder had a particle size of 279 nm, and the silver nanoparticles had an average diameter of 26.5 nm. Resin spheres containing HA-NpsAg (RHN) were then synthesized at two concentrations (0.5% and 1%) by dissolving the initial monomer mixture in tetrahydrofuran. Subsequent antimicrobial evaluations were conducted via agar diffusion and turbidimetry, employing three strains of Gram-negative bacteria (E. coli, K. oxytoca, and P. aeruginosa) and three strains of Gram-positive bacteria (S. mutans, S. aureus, and B. subtilis). The findings revealed that P. aeruginosa exhibited maximum susceptibility to RHN powder at a concentration of 0.5%, while RHN powder at 1% concentration demonstrated maximal inhibition against S. aureus and S. mutans. Overall, our study highlights the successful synthesis of a dental resin with hydroxyapatite and silver nanoparticles, exhibiting bactericidal properties at low silver concentrations. These findings hold promise for enhancing dental materials with improved antimicrobial efficacy and clinical performance.

Evaluation of photocatalytic properties of TiO2/g-C3N4 core-shell hybrid catalyst supported on Sr4Al14O25:eu,dy phosphor

TiO2/g-C3N4 hybrid compounds were supported as core-shell catalyst on Sr4Al14O25:Eu,Dy phosphor powder by a 2-step hydrothermal and solvothermal self-assembly method. Surface and chemical characterizations confirmed that the phosphor substrate and the hybrid catalysts co-existed as a multi-composite material. Where nano spherical TiO2 particles were dominant as core/shell catalyst. Diffuse reflectance spectra were shifted toward the visible light region (400 nm to 600 nm) in composites with g-C3N4 as shell-catalyst. X-ray photon spectroscopy (XPS) confirmed the chemical integrity and binding of g-C3N4 on phosphor/TiO2 material. When g-C3N4 was coated as shell-catalyst on phosphor/TiO2, superior photocatalytic performances of above 90% efficiency were obtained in comparison to where TiO2 was coated as shell-catalyst under both ultraviolet and visible light illumination. Thus, g-C3N4 is more active as shell-catalyst owing to its lower band gap of 2.7 eV than core TiO2 (3.2 eV).

Phosphor Ceramic Composite for Tunable Warm White Light.

Composite phosphor ceramics for warm white LED lighting were fabricated with K2SiF6:Mn4+ (KSF) as both a narrowband red phosphor and a translucent matrix in which yellow-emitting Y3Al5O12:Ce3+ (YAG) particles were dispersed. The emission spectra of these composites under blue LED excitation were studied as a function of YAG loading and thickness. Warm white light with a color temperature of 2716 K, a high CRI of 92.6, and an R9 of 77.6 was achieved. A modest improvement in the thermal conductivity of the KSF ceramic of up to 9% was observed with the addition of YAG particles. In addition, a simple model was developed for predicting the emission spectra based on several parameters of the composite ceramics and validated with the experimental results. The emission spectrum can be tuned by varying the dopant concentrations, thickness, YAG loading, and YAG particle size. This work demonstrates the utility of KSF/YAG composite phosphor ceramics as a means of producing warm white light, which are potentially suitable for higher-drive applications due to their increased thermal conductivity and reduced droop compared with silicone-dispersed phosphor powders.

Biodegradation of phenol-contaminated soil and plant growth promotion by Myroides xuanwuensis H13.

Physicochemical methods for remediating phenol-contaminated soils are costly and inefficient, making biodegradation an environmentally friendly alternative approach. This study aims to screen for potential phenol-degrading bacteria and to verify the removal capacities of a selected strain in a bioaugmentation experiment at the greenhouse level using Brassica chinensis L. (Chinese cabbage) as the model plant and phenol-contaminated soil. In parallel, pot experiments were conducted using a collaborative approach based on this model system. We found that Myroides xuanwuensis strain H13 showed a high degradation capability, with a 97.67% efficiency in degrading 100 mg/L phenol. Under shaking flask conditions, H13 facilitated the solubilization of tricalcium phosphate and potassium feldspar powder. Pot experiments suggested a phenol removal percentage of 89.22% and enhanced availability of soil phosphorus and potassium for plants with H13 inoculation. In this case, the abundance of soil microbes and the activity of soil enzymes significantly increased as well. Furthermore, both photosynthesis and the antioxidant system in Chinese cabbage were enhanced following H13 inoculation, resulting in its increased yield and quality. Partial least squares path modeling revealed that H13 can primarily affect plant root growth, with a secondary impact on photosynthesis. These findings highlight the potential of biodegradation from phenol-degrading bacteria as a promising strategy for efficient phenol removal from soil while promoting plant growth and health.IMPORTANCEThis study is significant for environmental remediation and agriculture by its exploration of a more environmentally friendly and cost-effective bio-strategy in treating phenol-contaminated soil. These findings have essential implications for environmental remediation efforts and sustainable agriculture. By utilizing the biodegradation capabilities of Myroides xuanwuensis strain H13, it is possible to remove phenol contaminants from the soil efficiently, reducing their negative effects. Furthermore, the enhanced growth and health of the Chinese cabbage plants indicate the potential of this approach to promote sustainable crop production.

Long-wavelength emission room-temperature phosphorescent carbon dots activated by an ortho-carboxyl substitution strategy and employed for achieving tunable LED

While room temperature phosphorescence (RTP) associated with carbon dots (CDs) has been widely achieved, obtaining long-wavelength emission RTP, especially while mitigating the quenching effect of water or dissolved oxygen, remains a challenging yet desirable goal. We synthesized three types of phosphorescent CDs with varying luminescent properties by using three precursors with carboxyls positioned differently. The formation process of these CDs resulted in a well-ordered and compact structure, effectively inhibiting molecular vibrations and reducing non-radiative transitions. Consequently, it successfully prevented the quenching effect of dissolved oxygen on the RTP of CDs in an aqueous environment. Significantly, PA-AIBN synthesized with phthalic acid, rather than iso-phthalic acid and terephthalic acid, exhibited long-wavelength emission RTP, with the phosphorescent emission center reaching as far as 640 nm. To be specific, the ortho-substituted carboxyls played a critical role in boosting the formation of intramolecular hydrogen bonds. Simultaneously, an increase in the doping levels of both nitrogen (N) and phosphorus (P) in PA-AIBN facilitated the long-wavelength emission RTP. The increased sp2 conjugated carbon core of PA-AIBN narrowed the optical band gap, contributing to the long-wavelength emission. Taken together, these factors cooperatively promoted the long-wavelength emission of RTP. Importantly, the PA-AIBN synthesized in this study exhibited a broad half-peak width and long-wavelength emission. It was successfully used in the preparation of white-light-emitting diodes without the need for commercial phosphor powder, demonstrating its enormous potential for practical lighting devices.

Stability and photoluminescence of Bi doped (La,Y)2O3 phosphor powders

La2-yYyO3 phosphor powders were prepared via the citric acid sol-gel combustion method and their stability was checked after four months of storage in the atmosphere using X-ray diffraction. The material, like La2O3, was prone to hydroxylation unless a high proportion of Y was added, which also caused changes in the phases present. Based on its stability, the composition La0.5Y1.5O3 was selected for further study with Bi doping. The luminescence from this material was not as intense as that from Y2-xO3:Bix=0.005, but there was a significant shift in colour as a result of the added La which meant that emission from the Bi3+ ions at the S6 sites of the alloy was close to that of unstable La2O3 on the colour chart.