Powder Form Research Articles

Monitoring illicit pentobarbital availability in the United States: A National Drug Early Warning System briefing

BackgroundPentobarbital is a Schedule II/III short-acting barbiturate with limited medical use in humans. Veterinary professionals use pentobarbital to euthanize dogs, cats, and other companion animals. Pentobarbital is also utilized in capital punishment and small amounts are illegally shipped or diverted to assist in suicides. However, five kilograms of pentobarbital smuggled in from Mexico was recently seized by an organized crime drug enforcement task force (along with fentanyl, heroin, and cocaine), which may suggest a shift in illicit supply. We investigated potential indicators of illicit pentobarbital use or availability in the US to help determine whether this drug is becoming an emerging public health concern. MethodsThe National Drug Early Warning System requested information on pentobarbital from its sentinel surveillance sites and collaborators and conducted a search of current literature. ResultsIn early 2024, multiple batches of counterfeit pills (e.g., pressed as “M30s” to represent oxycodone) confiscated near the Southwest border tested positive for pentobarbital plus combinations of fentanyl, fentanyl analogs, and xylazine. Other indicators suggest pentobarbital is being smuggled in powder form and possibly sold as another drug such as heroin. One national drug analysis program detected pentobarbital in 217 drug submissions from 2020 to 2023, and there were at least 12 fatal exposures linked to use from 2020 to 2022. ConclusionContinued monitoring of illicit use and availability is needed as pentobarbital may continue to appear on the illicit market. Unknown exposure can occur if the drug is mixed into counterfeit pills or sold in powder form represented to be another drug.

Physicochemical and sensory properties of fermented milk supplemented with sundried African horned melon

AbstractAfrican horned melon (AHM) (Cucumis metuliferus), indigenous to Kenya. It contains high polyphenol and antioxidant content, yet remains underutilized in food products. This study sought to increase the utilization of AHM by developing a supplemented milk product and evaluating the effects of sundried AHM powder on the physicochemical and sensory properties of the fermented milk product. The fermented milk was supplemented with three different forms of AHM powder: whole fruit, peel, and seed, at concentrations of 0.5%, 0.7%, and 1% w/v. Physicochemical parameters such as pH, total titratable acidity (TTA), syneresis, texture, and viscosity were measured, alongside sensory acceptability assessments. Statistical analysis demonstrated significant differences (p < 0.05) in physicochemical and sensory properties between the control (did not contain AHM) and supplemented samples, particularly at higher concentrations and extended storage periods. The inclusion of AHM powder markedly influenced the fermented milk's properties, with increased TTA and syneresis in samples with higher melon powder concentrations. TTA ranged between 0.32% and 0.46% among all samples during storage which were comparatively higher than the recommended values for fermented milk products at 0.3%. pH findings range was 4.22 and 4.58. The pH range between 4.2 and 4.6 is recommended by FDA for fermented milk. Syneresis were between 2% and 13%. Texture was between 1.24 and 3.95 N. Viscosity was between 1.67 and 3.87 cP. Sensory scores ranged from 8.00 to 2.67 during storage. Fruit seed powder (FSP1) recorded the lowest amount of pH. Control maintained a higher score in the sensory attributes.

Scaling a bifunctional catalytic Fixed-Bed reactor for acetone-to-mesitylene Jet-Fuel additive production

De-fossilization of the aviation sector will require the use of renewable synthetic jet fuels and additives that comply with strict regulations. One such additive, mesitylene, can be produced using a novel sustainable process based on the fermentation of biomass waste to acetone, followed by the self-condensation of acetone to mesitylene. This study addresses the viability of gas-phase self-condensation of acetone, catalyzed by TiO2 and Al-MCM-41 acid catalysts, at a technological readiness level of TRL-4.The reactor used was a bench-scale fixed-bed reactor (28 mm diameter and 500 mm height) loaded with commercial-sized catalyst pellets (1/8″ diameter). It was equipped with a jacket for heat transfer using flowing thermal oil. The performance of commercial-scale reactors was approximated under conditions of 275 °C, 280 kPa, and a space velocity of 50–500 mol/kg·h.The catalyst pellets exhibited significant mass transfer resistances, which limited the reaction rate. This, in turn, reduced the deactivation rate caused by the adsorption of high-molecular-weight condensation products on the strongest acid sites. Additionally, the product distribution differed between pellet and powder forms of the catalysts, with higher yields of isophorone and mesitylene being observed on TiO2 and Al-MCM-41 pellets, respectively. A reaction and mass transfer model was proposed and fitted to the bench-scale data.The study also considered the combination of both catalyst pellets in the same reactor for the bench-scale unit. It was demonstrated that mesitylene yield could be improved, with the best configuration being two separate beds placed consecutively in the reactor with a catalyst ratio of 1:2 (TiO2:MCM-41).

Fine-grained concrete properties in depending on carbon black additive introducing methods

The object of research is fine-grained concrete with carbon black additive obtained from the recycling of rubber tires. This study aims to determine a method for introducing carbon black into fine-grained concrete that achieves the best strength characteristics. The first method involves the preliminary preparation of a suspension by mixing a superplasticizer, carbon black, and part of the water. The second is the granulation of carbon black together with a superplasticizer in the ratio water: superplasticizer = 9: 1, followed by its introduction into the dry mixture and the addition of water at the last stage of mixing the raw material mixture. The addition of carbon black in powder form to the concrete mixture resulted in a decrease in strength from 35.1 MPa (without carbon black) to 34.9–25.6 MPa (with 4–12% carbon black). The effectiveness of the method of introducing granular carbon black was established, with an increase in strength by 40% in relation to the mixture obtained by the first method. The best strength of 50 MPa was demonstrated by the mix with 4% granular carbon black, which was 6% higher than that of the reference mix. Granulation of carbon black makes it possible to reduce its hydrophobicity and solve the problem of uniform distribution of carbon particles during homogenization of the raw material mixture in the presence of water.

Influence of Gamma-Phase Aluminum Oxide Nanopowder and Polyester-Glass Recyclate Filler on the Destruction Process of Composite Materials Reinforced by Glass Fiber.

Recycling of composite materials is an important global issue due to the wide use of these materials in many industries. Waste management options are being explored. Mechanical recycling is one of the methods that allows obtaining polyester-glass recyclate in powder form as a result of appropriate crushing and grinding of waste. Due to the fact that the properties of composites can be easily modified by adding various types of fillers and nanofillers, this is one of the ways to improve the properties of such complex composite materials. This article presents the strength parameters of composites with the addition of fillers in the form of polyester-glass recyclate and a nanofiller in the form of gamma-phase aluminum nanopowder. To analyze the obtained results, Kolmogorov-Sinai (K-S) metric entropy was used to determine the transition from the elastic to the viscoelastic state in materials without and with the addition of nanoaluminum, during a static tensile test. The tests included samples with the addition of fillers and nanofillers, as well as a base sample without any additives. The article presents the strength parameters obtained from a testing machine during a static tensile test. Additionally, the acoustic emission method was used during the research. Thanks to which, graphs of the effective value of the electrical signal (RMS) were prepared as a function of time, the parameters were previously identified as extremely useful for analyzing the destruction process of composite materials. The values obtained from the K-S metric entropy method and the acoustic emission method were plotted on sample stretching graphs. The influence of the nanofiller and filler on these parameters was also analyzed. The presented results showed that the aluminum nanoadditive did not increase the strength parameters of the composite with recyclate as a result of the addition of aluminum nanofiller; however, its addition influenced the operational parameters, which is reflected in a 5% increase in the UTS value (from 55% to 60%).

Functional dry powders of connexin-containing extracellular vesicles

Extracellular vesicles (EVs) have emerged as a promising drug delivery system. Connectosomes are a specialized type of EVs that contain connexins in their membranes. Connexin is a surface transmembrane protein that forms connexin hemichannels. When a connexin hemichannel on a connectosome docks with another connexin hemichannel of a target cell, they form a gap junction that allows direct intracellular delivery of therapeutic cargos from within the connectosome to the cytoplasm of the recipient cell. In the present study, we tested the feasibility of converting connectosomes into dry powders by (thin-film) freeze-drying to enable their potential storage in temperatures higher than the recommended −80 °C, while maintaining their activity. Connectosomes were isolated from a genetically engineered HeLa cell line that overexpressing connexin-43 subunit protein tagged with red fluorescence protein. To facilitate the testing of the function of the connectosomes, they were loaded with calcein green dye. Calcein green-loaded connectosomes were thin-film freeze-dried with trehalose alone or trehalose and a polyvinylpyrrolidone polymer as lyoprotectant(s) to produce amorphous powders with high glass transition temperatures (>100 °C). Thin-film freeze-drying did not significantly change the morphology and structure of the connectosomes, nor their particle size distribution. Based on data from confocal microscopy, flow cytometry, and fluorescence spectrometry, the connexin hemichannels in the connectosomes reconstituted from the thin-film freeze-dried powder remained functional, allowing the passage of calcein green through the hemichannels and the release of the calcein green from the connectosomes when the channels were opened by chelating calcium in the reconstituted medium. The function of connectosomes was assessed after one month storage at different temperatures. The connexin hemichannels in connectosomes in liquid lost their function when stored at −19.5 ± 2.2 °C or 6.0 ± 0.5 °C for a month, while those in dry powder form remained functional under the same storage conditions. Finally, using doxorubicin-loaded connectosomes, we showed that the connectosomes reconstituted from thin-film freeze-dried powder remained pharmacologically active. These findings demonstrate that (thin-film) freeze-drying represents a viable method to prepare stable and functional powders of EVs that contain connexins in their membranes.

A Large-Scale Electrometallurgical Treatment of Waste Printed Circuit Board (WPCB) in Ethylene Glycol for Metal Recovery

The accumulating generation of E-Waste is gaining more concern. This work reported an environmental-friendly approach, slurry electrolysis (SE), to highly effectively recover metals embedded in Waste Printed Circuit Board (WPCB). The reusable ethylene glycol (EG) is employed as the electrolyte, simple and cheap graphite rod, and copper strip function as anode and cathode, respectively. And it could operate at room temperature and pressure. EG can withstand for hours or days of electrolysis with no sign of degradation but evaporation. It has shown a good selectivity in the leaching solution with metal ions. The metals with high activity could be electrochemically oxidized but not reduced. The metals with low activity could undergo both. From the current results, the system has demonstrated a moderate faraday efficiency of the cathode of 67.7%, successfully recovered 95-97% copper from the real WPCB powder with 61% copper, 24% Al, 10% Zn, 3% Sn and some trace metals. Notably, the extracted metals are all in powder form and easily extractable, indicating that it requires only some facile treatments to make the powder eligible for replacement from mining. This study proved another novel approach to recovering metals from E-Waste on an industrial scale.

Elucidating Fundamental Structure-Function Relationships for Iridium Oxide Catalysts in PEM Water Electrolyzers

Proton exchange membrane water electrolysis (PEMWE) will contribute substantially towards decarbonization efforts and is expected to make up 40% of the green hydrogen market.1 A primary barrier for PEMWE scale-up is the detrimentally high usage of iridium for the oxygen evolution reaction catalyst. To achieve large-scale PEMWE deployment, loading reductions from 2-3 mgIr cm-2 to 0.10 mgIr cm-2 must occur.2 Such a feat can only be achieved through significant improvements in activity and durability. However, there exists a lack of fundamental understanding in how catalyst properties correlate to performance, thus hindering optimization efforts. The phenomena of catalyst activity/durability are frequently treated with purely empirical approaches, and thus the foundational knowledge needed for improved catalyst design—such as understanding how crystallinity and oxidation states impact performance in a membrane electrode assembly (MEA)—has not been well investigated.3 This work serves to bridge this gap in knowledge by correlating extensive structural characterization data with MEA activity and durability for six commercial IrOx catalysts. Properties such as oxidation states, chemical composition, local atomic/electronic configuration, crystallinity, surface area, and particle size distribution were elucidated for each catalyst in powder and/or MEA form. Following MEA conditioning, catalyst activity was benchmarked via polarization curves and Tafel analysis. Lastly, durability was evaluated by performing a 500h accelerated stress test (adapted from the H2New consortium), with electrochemical characterization conducted every 100h. The presence of amorphous character and the Ir3+ oxidation state was the best determinant of activity. Durability, on the other hand, was associated with greater crystalline character and more redox-stable cyclic voltammogram profiles. Correlations regarding chemical composition, local atomic/electronic configurations, particle size, and surface area will be discussed as well. Smolinka, T.; Wiebe, N.; Sterchele, P.; Palzer, A.; Lehner, F.; Jansen, M.; Kiemel, S.; Miehe, R.; Wahren, S.; Zimmermann, F. Studie IndWEDe: Industrialisierung Der Wasserelektrolyse in Deutschland: Chancen Und Herausforderungen Für Nachhaltigen Wasserstoff Für Verkehr, Strom Und Wärme.; 2018.Clapp, M.; Zalitis, C. M.; Ryan, M. Perspectives on Current and Future Iridium Demand and Iridium Oxide Catalysts for PEM Water Electrolysis. Catal Today 2023, 420 (March), 114140. https://doi.org/10.1016/j.cattod.2023.114140.Lazaridis, T.; Stühmeier, B. M.; Gasteiger, H. A.; El-Sayed, H. A. Capabilities and Limitations of Rotating Disk Electrodes versus Membrane Electrode Assemblies in the Investigation of Electrocatalysts. Nat Catal 2022, 5 (5), 363–373. https://doi.org/10.1038/s41929-022-00776-5.

Structural and magnetic insights of the novel phosphate Ca2NiFe2(PO4)4

One of the primary goals of scientists in the field of materials chemistry is to explore new functional materials, the discovery of new crystal structures and the understanding of their structure-properties relationship. This paper outlines the synthesis of a novel orthophosphate, Ca2NiFe2(PO4)4, in the single crystal and powder forms. The crystallographic analysis reveals that this newly synthesized phosphate exhibits an orthorhombic crystal lattice with the Pbca space group. The crystal structure is composed of PO4 tetrahedra connected to Fe1O6, Fe2O5 and NiO5 polyhedra through shared vertices. This interconnection forms a three-dimensional framework that encloses cavities housing Ca2+ cations. A sol-gel technique was employed to obtain the pure powder. The Rietveld refinement indicates an excellent correlation between the calculated and observed X-ray diffraction patterns. This material was further characterized structurally using infrared and Raman spectroscopy, and morphologically by scanning electron microscopy. The magnetic measurements revealed two magnetic transitions at T1∼8.9 K and T2∼16.5 K suggesting the presence of magnetic frustration with overall dominant antiferromagnetic behavior.

ProtectaBEE® and bee vectoring: innovating hive-based health with inspensing technology for sustainable apiculture

Apivectoring, or bee vectoring, employs managed bees to distribute powders containing disease and pest-fighting biocontrol agents during pollination flights to crops. Our research introduces a novel application of this concept, termed inspensing, which leverages bee vectoring for hive-based benefits. In inspensing, bees traverse through a carrier powder combined with products aimed at combating pathogens or pests within the hive. To facilitate this, we developed the ProtectaBEE® system, an innovative beehive-entrance technology that guides bees through a compartment inoculated with an inspensing powder. This system facilitates the application of beneficial agents into the hive without the need for beekeepers to open the hive, thereby streamlining the treatment process and reducing hive disturbance. To analyze the effectiveness of the system, we employed a fluorescent tracer in a powder formulation for tracking distribution throughout the hive. Complementing this, we inspensed a living dry powder-formulated biocontrol agent, Beauveria bassiana, an entomopathogenic fungus known to reduce Varroa mite populations, and detected its presence in the hive using PCR. The fluorescent powder was detected in 78.8% of the samples while B. bassiana was confirmed in up to 86.2% of larvae and 91.7% of mites. Our results underscore the system's efficacy in delivering material throughout the hive and affirm the potential for inspensing dry-powder-formulated biocontrol agents to manage Varroa destructor. Inspensing paves new paths for optimizing bee health and pest control strategies, streamlining disease management, simplifying hive maintenance, and minimizing beekeeper intervention, all contributing to sustainable apiculture.

Enzymatically and chemically starch nanoparticles preparation using ultrasonication, precipitation and lyophilization post-treatments: Screening and characterization

Starch nanoparticles (SNPs) have been used in food emulsions as natural stabilizer and emulsifier. SNPs in colloidal form were produced using enzymatically, acidic and alkaline hydrolyses in combination to ultrasonication and precipitation methods. X-Ray diffraction test for produced SNPs indicated that enzymatically and acidic prepared SNPs had amorphous structure while, the resulted SNPs using alkaline hydrolysis had lower relatively crystallinity. Results indicated that, enzymatically prepared SNPs, had minimum particle size (225 ± 10 nm) and polydispersity index (0.472 ± 0.05), and maximum zeta potential (−26.3 ± 1 mV), antioxidant activity (3.36 ± 0.05 %) and specific surface area (1.8 ± 0.1 m2g−1). Transmission electron microscopy revealed that prepared SNPs had spherical shape and enzymatically prepared SNPs had mean particle size of <100 nm. SNPs in powder form were prepared using freeze drying (pressure and temperature of 100 Pa and − 70 °C). Atomic force microscopy results demonstrated that starch granules had smooth surface, with polyhedral shape and particle size ranging 5 to 25 μm, and after hydrolysis, SNPs had particle size in nanometer scale. Emulsion ability test indicated that oil separation time from the prepared emulsions containing 10 % (W/V) starch, and enzymatically, acidic and alkaline prepared SNPs powder were 41, 70, 82 and 101 s, respectively.

Boron substitution in silicate bioactive glass scaffolds to enhance bone differentiation and regeneration

Commercially available bioactive glasses (BAGs) are exclusively used in powder form, due to their tendency to crystallize. Silicate BAG 1393 was developed to allow fiber drawing and scaffold sintering, but its slow degradation limits its potential. To enable scaffold manufacturing while maintaining glass dissolution rate close to that of commercially available BAGs, the borosilicate glass 1393B20 was developed. This study investigates the potential of 1393B20 scaffolds to support bone regeneration and mineralization in vitro and in vivo, in comparison to silicate 1393. Both scaffolds supported human adipose stem cells proliferation, either in direct contact for the 1393, or mainly around for the 1393B20. Similarly, both BAGs induced osteogenesis and angiogenesis in vitro, with a better pro-angiogenic influence of the 1393B20. In addition, these scaffolds supported bone regeneration and osteoclast/osteoblast activity in vivo in critical-sized rat calvarial defect. Nevertheless, mineralization and collagen formation were significantly enhanced for the 1393B20, at 3-months post-implantation, assigned to faster and more complete dissolution of the scaffolds. Thus, 1393B20 demonstrates greater promise for bone tissue engineering certainly due to its time-controlled release of boron and silicon. Statement of significanceBioactive glasses (BAGs) show great promise in bone tissue engineering as they effectively bond with bone tissue, fostering integration and regeneration. Silicate BAG 1393 was developed to allow fiber drawing and scaffold sintering, but its slow degradation limits its potential. To enable scaffold manufacturing while maintaining glass dissolution rate close to that of commercially available BAGs, the borosilicate glass 1393B20 was developed. Both BAGs induced osteogenesis and angiogenesis in vitro, with a better pro-angiogenic influence of the 1393B20. The presence of boron in the 1393B20 enhanced mineralization and collagen formation in vivo compared to 1393, probably due to its faster dissolution rate. Here, 1393B20 demonstrated greater promise for bone tissue engineering compared to the well-known 1393 BAG.

In-situ immobilization of ZIF-67/ZIF-8 on wood biomass for degradation of methylene blue and formaldehyde

Metal-organic frameworks (MOFs) have been extensively studied for the removal of pollutants in wastewater and air. However, the existence of MOF materials in powder form with easy agglomeration and difficult separation has greatly confined their application potential. To address this challenge, ZIF-67/ZIF-8 composites were in-situ grown on wood biomass, with its porous structure providing channels for the growth of MOFs and active sites for MOFs catalysis. The structure, i.e., morphology, crystallinity and chemical components, and optical properties were characterized. The degradation efficiency of methylene blue (MB) by the ZIF-67/ZIF-8@wood composites photocatalyst was more than 85.7 % under visible light irradiation within 90 mins, reflecting the good photocatalytic activity of the composites. The ZIF-67/ZIF-8@wood composites completely adsorbed and decomposed HCHO (22.3 ppm) within 30 mins. The high catalytic performance of the ZIF-67/ZIF-8@wood composites can be attributed to the high surface area of wood that results in a high absorption of contaminants. This simple, low-cost, and green preparation method has promoted the sustainable utilization of biomass resources with great significance for practical environmental remediation.

A composite photoluminescent probe based on Er/Yb co-doped tellurite glass powder for dual-parameter measurement of temperature and UV radiation

To cope with the cross-sensitivity of simultaneous measurement of ultraviolet (UV) irradiance and temperature, we propose and experimentally demonstrate a miniature composite photoluminescent probe that is formed by thoroughly mixing Er/Yb co-doped tellurite glass powder into a resin adhesive substrate. Utilizing tellurite glass in form of powder not only guarantees its thorough mixing into the liquid resin base, but also retains its amorphous glass phase for hosting Er/Yb ions, thus breaking the limitations of studying tellurite glass only in bulk or fibrous form. Co-excited by UV radiation and NIR pumping, the composite probe produces a superimposed fluorescence emission spectrum, where the intensity change rate of the 488 nm dip can be used for UV irradiance measurement, and the fluorescence intensity ratio (FIR) of the 524 nm and 545 nm peaks for temperature measurement. Based on the sensitive specificity of the resin substrate and the Er/Yb co-doped tellurite glass, we have realized the simultaneous measurement of UV and temperature without cross-sensitivity.

Electrokinetic Properties of Cellulose Diacetate—Influence of Morphology and Crystallinity on the Zeta Potential

AbstractThe study presents the electrokinetic properties of the zeta potential and the isoelectric point for cellulose diacetate (CA) in the forms of powder, nonporous film, and porous film. Surface zeta potential (ζ) and isoelectric point (IEP) are important properties that reflect the material's behavior in contact with liquids, as a consequence of the surface charge density and the morphology of the material. Nonporous films are prepared by casting CA solution on glass and Teflon dishes, while the porous film is prepared by the solution blow spinning (SBS) technique. The ζ potential is determined using the streaming potential method in the pH range from 2.5 to 9.5. The influence of the material's crystallinity (CI) and surface roughness (Sa) on the zeta potential is studied. The form of the material (powder, porous film, or nonporous film) influences the electrokinetic properties, which may have consequences on their behavior in contact with liquid (e.g., for processes such as oxidation, surface modification, grafting, or aging during use).

Effect of Film Thickness on the Electrical Resistivity and Optical Functions Distribution of Iron Tris(8-hydroxyquinoline) Thin Films

Iron tris(8-hydroxyquinoline) (Feq3) was synthesized and investigated by X-ray photoemission spectroscopy. It crystalizes in triclinic polycrystalline structure in powder form, whereas the Feq3 films, with different thickness values (12, 20, 35, and 42 nm), have an amorphous structure. The influence of film thickness on the electrical resistivity and the optical properties is reported. The morphology of Feq3 was investigated in terms of field-emission scanning electron microscope. Electrical resistivity measurements indicate an inverse proportionality to the film thickness. The optical properties of Feq3 films were investigated in terms of photoluminescence spectra and spectrophotometric measurements of transmittance and reflectance. The optical functions such as absorption coefficient and refractive index of the films were calculated. The dependence of the Feq3 film thickness on the optical energy band gap and dispersion parameters was studied. The outcomes indicate that the Feq3 films are of great importance for applications in organic solar cells and light emitting diodes.

Development of a New Dry Powder Aerosol Synthetic Lung Surfactant Product for Neonatal Respiratory Distress Syndrome (RDS) – Part I: In Vitro Testing and Characterization

PurposeImproving the deep lung delivery of aerosol surfactant therapy (AST) with a dry powder formulation may enable significant reductions in dose while providing improved efficacy. The objective of Part I of this two-part study was to present the development of a new dry powder aerosol synthetic lung surfactant (SLS) product and to characterize performance based on aerosol formation and realistic in vitro airway testing leading to aerosol delivery recommendations for subsequent in vivo animal model experiments.MethodsA new micrometer-sized SLS excipient enhanced growth (EEG) dry powder formulation was produced via spray drying and aerosolized using a positive-pressure air-jet dry powder inhaler (DPI) intended for aerosol delivery directly to intubated infants with respiratory distress syndrome (RDS) or infant-size test animals.ResultsThe best-case design (D2) of the air-jet DPI was capable of high emitted dose (> 80% of loaded) and formed a < 2 µm mass median aerodynamic diameter (MMAD) aerosol, but was limited to ≤ 20 mg mass loadings. Testing with a realistic in vitro rabbit model indicated that over half of the loaded dose could penetrate into the lower lung regions. Using the characterization data, a dose delivery protocol was designed in which a 60 mg total loaded dose would be administered and deliver an approximate lung dose of 14.7–17.7 mg phospholipids/kg with a total aerosol delivery period < 5 min.ConclusionsA high-efficiency aerosol SLS product was designed and tested that may enable an order of magnitude reduction in administered phospholipid dose, and provide rapid aerosol administration to infants with RDS.

Development of novel high entropy alloy feedstocks for powder bed fusion using equimolar CoFeNiCuMn composition

In this study, six different prediction models were used to generate a script to obtain the High Entropy Alloy (HEA) database from which CoFeNiCuMn was selected. The powder form of the alloy was utilized by high-pressure gas atomization. The samples were characterized by Energy Dispersive Spectroscopy (EDS) for chemical analysis, Electron Back-Scattered Diffraction (EBSD) for grain size determination, X-ray Diffraction (XRD), and Transmission Electron Microscopy (TEM) for phase analysis, and nanoindentation for mechanical properties. Equimolar CoFeNiCuMn samples had single face-centered cubic (FCC) structure, and the +106 μm showed 111 GPa elastic modulus and 2.97 GPa hardness. Also, each sample was evaluated for compatibility with powder bed fusion (PBF) by employing Scanning Electron Microscopy (SEM) for morphology, laser diffraction for particle size distribution, and static and dynamic flow analyses for the flowability examination. Considering all results, it was observed that three tests were sufficient to comparatively assess the novel alloy powders as suitable feedstock for PBF. The −15 µm sample exhibited widespread satellite particles in its morphology, resulting in the lowest apparent density of 4.28 g/cm³ and the highest specific energy of 2.60 mJ/g. In contrast, the other samples, with larger particle sizes, demonstrated discrete powder particles and improved flowability parameters.

HP inulin-MCT dietary fiber improves lipid metabolism and prevents non-alcoholic steatohepatitis in obese mice

IntroductionRegular intake of dietary fiber (DF) can counteract the negative impacts of obesity on physical health and chronic disease risk. DF mitigates obesity by promoting fullness, reducing calories, slowing nutrient absorption, stabilizing glucose, preventing fat storage, and influencing gut microbiota. High-performance (HP) inulin, a highly fermentable water-soluble DF, shows promise, but its palatability is limited in powder form. Combining HP inulin with beneficial triglycerides like Medium Chain Triglycerides (MCT) could overcome this issue. Aim of studyThis study investigates the effects of HP inulin-MCT on lipid metabolism and immune modulation in high-fat high-sucrose (HFHS) diet-induced obese mice. MethodsObese mice were orally administered with 20 % (w/v) HP inulin-MCT ad-libitum for 30 days. We measured their peripheral blood lipid profile, including LDL, HDL, and triglycerides. Additionally, the atherogenic coefficient, a parameter for assessing cardiovascular disease risk, was determined by calculating the ratio of non-HDL-C to HDL-C. Flow cytometry was used to identify splenic regulatory CD4 + and CD8 + T cells (Tregs). The Non-Alcoholic Steatohepatitis Score was assessed through histological examination. ResultsSignificant reduced body mass index, improved lipid profiles, and reduced cardiovascular disease risk were observed in the obese mice treated with HP inulin-MCT. Moreover, HP inulin-MCT appeared to ameliorate non-alcoholic steatohepatitis, a liver condition associated with obesity. These health improvements were linked to immune system modulation, associated with an increase of CD4+ T-regulatory cells after HP inulin-MCT supplementation. ConclusionHP inulin-MCT is a promising and palatable dietary intervention to combat obesity-related noncommunicable diseases, offering the potential for better overall health outcomes.

The Botulinum Toxin Innovation: From Powder to Liquid.

Botulinum toxin (BoNT) has evolved as a popular treatment for various medical and aesthetic conditions since the 1980s. The emergence of new liquid formulation BoNT products in the industry highlights the need to evaluate the value and advantages of these modern formulations. The aim of this review was to assess and compare the expected difference in practice between liquid and powder formulation BoNT products. This article involves a review of pertinent guidelines, product information from manufacturers, available database for safety reports, and survey results. Guidelines and safety reports have pointed out potential risks in the reconstitution process, while medication preparation steps are simplified in liquid formulation. The shift toward ready-to-use liquid products can mitigate risks related with reconstitution errors and potentially enhancing patient care by saving time and cost associated with medication preparation.