Potential Wound Dressings Research Articles

Physically Cross-Linked PVA Hydrogels as Potential Wound Dressings: How Freezing Conditions and Formulation Composition Define Cryogel Structure and Performance.

Objectives: Hydrogels produced using the freeze-thaw method have demonstrated significant potential for wound management applications. However, their production requires precise control over critical factors including freezing temperature and the choice of matrix-forming excipients, for which no consensus on the optimal conditions currently exists. This study aimed to address this gap by evaluating the effects of the above-mentioned variables on cryogel performance. Methods: Mechanical properties, absorption capacity, and microstructure were assessed alongside advanced analyses using differential scanning calorimetry (DSC) and low-field nuclear magnetic resonance relaxometry (LF TD NMR). Results: The results demonstrated that fully hydrolyzed polyvinyl alcohol (PVA) with a molecular weight above 61,000 g/mol is essential for producing high-performance cryogels. Among the tested formulations, an 8% (w/w) PVA56-98 solution (Mw~195,000; DH = 98.0-98.8%) with 10% (w/w) propylene glycol (PG) provided the best balance of stretchability, durability, and low adhesion. Notably, while -25 °C is often used for cryogel preparation, freezing the gel precursor at -80 °C yielded superior results, producing materials with more open, interconnected structures and enhanced mechanical strength and elasticity-deviating from conventional practices. Conclusions: The designed cryogel prototypes exhibited functional properties comparable to or even surpassing commercial wound dressings, except for absorption capacity, which remained lower. Despite this, the cryogel prototypes demonstrated potential as wound dressings, particularly for use in dry or minimally exuding wounds. All in all, this study provides a comprehensive analysis of the physicochemical and functional properties of PVA cryogels, establishing a strong foundation for the development of advanced wound dressing systems.

Investigation of Tannic Acid Crosslinked PVA/PEI-Based Hydrogels as Potential Wound Dressings with Self-Healing and High Antibacterial Properties.

This study developed hydrogels containing different ratios of TA using polyvinyl alcohol (PVA) and polyethyleneimine (PEI) polymers crosslinked with tannic acid (TA) for the treatment of burn wounds. Various tests, such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), swelling, moisture retention, contact angle, tensile strength, the scratch test, antibacterial activity and the in vitro drug-release test, were applied to characterize the developed hydrogels. Additionally, the hydrogels were examined for cytotoxic properties and cell viability with the WST-1 test. TA improved both the self-healing properties of the hydrogels and showed antibacterial activity, while the added gentamicin (GEN) further increased the antibacterial activities of the hydrogels. The hydrogels exhibited good hydrophilic properties and high swelling capacity, moisture retention, and excellent antibacterial activity, especially to S. aureus. In addition, the swelling and drug-release kinetics of hydrogels were investigated, and while swelling of hydrogels obeyed the pseudo-second-order modeling, the drug release occurred in a diffusion-controlled manner according to the Higuchi and Korsmeyer-Peppas models. These results show that PVA/PEI-based hydrogels have promising potential for wound dressings with increased mechanical strength, swelling, moisture retention, self-healing, and antibacterial properties.

Multifunctional Microneedle Patch with Diphlorethohydroxycarmalol for Potential Wound Dressing.

Treatment of skin wounds with diverse pathological characteristics presents significant challenges due to the limited specific and efficacy of current wound healing approaches. Microneedle (MN) patches incorporating bioactive and stimulus materials have emerged as a promising strategy to overcome these limitations and integrating bioactive materials with anti-bacterial and anti-inflammatory properties for advanced wound dressing. We isolated diphlorethohydroxycarmalol (DPHC) from Ishige okamurae and assessed its anti-inflammatory and anti-bacterial effects on macrophages and its antibacterial activity against Cutibacterium acnes. Subsequently, we fabricated polylactic acid (PLA) MN patches containing DPHC at various concentrations (0-0.3%) (PDPHC MN patches) and evaluated their mechanical properties and biological effects using in vitro and in vivo models. Our findings demonstrated that DPHC effectively inhibited nitric oxide production in macrophages and exhibited rapid bactericidal activity against C. acnes. The PDPHC MN patches displayed potent antibacterial effects without cytotoxicity. Moreover, in 2,4-Dinitrochlorobenzene-stimulated mouse model, the PDPHC MN patches significantly suppressed inflammatory response and cutaneous lichenification. The results suggest that the PDPHC MN patches holds promise as a multifunctional wound dressing for skin tissue engineering, offering antibacterial properties and anti-inflammatory properties to promote wound healing process.

Phycocyanin-Loaded Alginate-Based Hydrogel Synthesis and Characterization.

Phycocyanin was extracted from Spirulina platensis using conventional extraction (CE), direct ultrasonic-assisted extraction (direct UAE), indirect ultrasonic-assisted extraction (indirect UAE), and microwave-assisted extraction (MAE) methods at different temperatures, extraction intervals, stirring rate, and power intensities while maintaining the same algae to solvent ratio (1:15 w/v). The optimization of the extraction parameters indicated that the direct UAE yielded the highest phycocyanin concentration (29.31 ± 0.33 mg/mL) and antioxidant activity (23.6 ± 0.56 mg TE/g algae), while MAE achieved the highest purity (Rp = 0.5 ± 0.002). Based on the RP value, phycocyanin extract obtained by MAE (1:15 w/v algae to solvent ratio, 40 min, 40 °C, and 900 rpm) was selected as active compound in an alginate-based hydrogel formulation designed as potential wound dressings. Phycocyanin extracts and loaded hydrogels were characterized by FT-IR analysis. SEM analysis confirmed a porous structure for both blank and phycocyanin loaded hydrogels, while the mechanical properties remained approximately unchanged in the presence of phycocyanin. Phycocyanin release kinetics was investigated at two pH values using Zero-order, First-order, Higuchi, and Korsmeyer-Peppas kinetics models. The Higuchi model best fitted the experimental results. The R2 value at higher pH was nearly 1, indicating a superior fit compared with lower pH values.

Hemp Protein Isolate-Based Natural Thermal-Reversible Hydrogel as a Novel Wound Dressing Material.

Hydrogels, due to their excellent microstructure and mechanical strength, have become a novel biomaterial in wound dressing. However, plant proteins have never been considered because of their poor original gelling performances and insufficient rheological properties. Here, we reported the fabrication of a plant protein-based thermal-reversible gel using a reverse micelle-extracted hemp protein isolate (HPI). A systematic study was conducted to fully reveal their microstructure, rheological properties, and anti-inflammatory effect to lay a foundation for this newly developed plant protein hydrogel as a potential natural wound dressing. By modulating protein concentration (4% HPI) and temperature (85 °C), a thermal-reversible HPI gel appeared as a filament structure with the major molecular driving force of hydrophobic interactions and hydrogen bonds. By characterizing the rheological properties, lower gel strength and wider linear viscoelastic regime were determined in the thermal-reversible HPI gel compared with a thermal-irreversible HPI gel. Besides, large amplitude oscillatory shear data identified the thermal-reversible gel as a soft gel which demonstrated intracycle strain stiffening and shear thinning behavior. Moreover, the thermal-reversible HPI gel is nontoxic and has benefits in neutrophil growth with injectability and perfect wound coverage. This study opens a novel means to form a natural thermal-reversible hydrogel that can be a new material source for wound dressing.

Carboxymethyl chitosan/polyacrylamide double network hydrogels based on hydrogen bond cross-linking as potential wound dressings for skin repair

An ideal biomedical hydrogel should imitate natural tissues with high water absorption, high toughness and superior biocompatibility. However, hydrogels constructed from biomolecules such as polysaccharides have low mechanical strength and limited applications. Based on carboxymethyl chitosan (CMCS) and polyacrylamide (PAM), a facile process is presented for preparing double network hydrogels (CMCS/PAM) with improved mechanical properties. According to the systematic characterization, carboxymethyl chitosan and polyacrylamide form a double network hydrogel through hydrogen bonding. The introduction of carboxymethyl chitosan alters the microscopic structure of PAM hydrogel, resulting in a consistent porosity pattern. Hydrogels with double networks exhibit high tensile properties, high stiffness, and good energy dissipation. Furthermore, the hydrogel exhibits effective adhesion to other hydrophilic surfaces. The CMCS/PAM network hydrogels possess excellent properties such as high swelling capacity, injectability, and cellular biocompatibility, making them potentially valuable for biomedical applications.

Effect of Tetrapropylammonium Chloride Quaternary Ammonium Salt on Characterization, Cytotoxicity, and Antibacterial Properties of PLA/PEG Electrospun Mat.

In this study, poly(lactic acid) (PLA)-tetrapropylammonium chloride (TCL)-poly(ethylene glycol) (PEG) nonwoven networks were produced using PLA, PEG with different concentrations (3, 5, 7, and 9 wt%), and TCL. PEG is included as a plasticizer in PLA polymer, which has high biocompatibility but a brittle structure. The importance of this study is to investigate the effect of TCL salt on the characterization of PLA-PEG nanofibers. For this research, the cytotoxicity test system responsible for the fibroblast cell line (L929) was evaluated with the liquid absorption capacity (LAC) and drying time tests for its use in wound dressings. The addition of TCL salt reduced bead formation in PLA-PEG nanofibers and increased the homogeneity of fiber dispersion. The smoothest and most homogeneous nonwoven networks were obtained as PLA-5TCL-PEG. It was also reported that this nonwoven network exhibited liquid absorption behavior with a maximum increase of 150% compared to the PLA-PEG nonwoven network and had the highest Young's modulus value of 12.97 MPa. In addition to these tests, evaluations were made with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), drying time test, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and mechanical tests. In addition, high cell viability was observed in L292 mouse fibroblast cells at the end of the 24th hour, again with the effect of TCL salt. In addition, antibacterial activity was tested against gram-negative E. coli and gram-positive S. aureus bacteria, and it was observed that there was no antibacterial activity. Since PLA-TCL-PEG nonwoven webs have a maximum cell viability of 133.27%, they are recommended as a potential dermal wound dressing.

Chitosan/cellulose nanocrystals/graphene oxide scaffolds as a potential pH-responsive wound dressing: Tuning physico-chemical, pro-regenerative and antimicrobial properties

Chronic wounds (CWs) treatment still represents a demanding medical challenge. Several intrinsic physiological signals (i.e., pH) help to stimulate and support wound healing. CWs, in fact, are characterized by a predominantly alkaline pH of the exudate, which acidifies as the wound heals. Therefore, pH-responsive wound dressings hold great potential owing to their capability of tuning their functions according to the wound conditions. Herein, porous chitosan (CS)-based scaffolds loaded with cellulose nanocrystals (CNCs) and graphene oxide (GO) were successfully fabricated using a freeze-drying method. CNCs were extracted from bagasse pulps fibers through acid hydrolysis. GO was synthesised by Hummer's method. The scaffolds were then ionically cross-linked using the amino acid L-Arginine (Arg), as a bioactive agent, and tested as potential pH-responsive wound dressing. Notably, the effect of CNCs and GO singly and simultaneously loaded within the CS-Arg scaffolds was investigated. The modulation of CNCs and GO content within CS-Arg scaffolds facilitated the development of scaffolds with an optimal pH-dependent swelling ratio capability and extended degradation time. Furthermore, CS/CNC/GO-Arg scaffolds exhibited tuned biological features, in terms of antimicrobial activity, cellular proliferation/migration ability, and the expression of extracellular matrix specific markers (i.e., elastin and collagen I) related to wound healing in human dermal fibroblasts.

Effect of the molar mass of chitosan and film casting solvents on the properties of chitosan films loaded with Mentha spicata essential oil for potential application as wound dressing

Chitosan based films endowed with antibacterial features have witnessed remarkable progress as potential wound dressings. The current study aimed at appraising the effects of the molar mass of chitosan (MM) and the film casting acids on the properties of unplasticized chitosan films and plasticized MSO-embedded chitosan films in order to provide best suited film formulation as a potential candidate for wound dressing application. The prepared films were functionally characterized in terms of their qualitative assessment, thickness, density, swelling behavior, water vapor barrier, mechanical and antibacterial properties. Overall, all chitosan films displayed thickness lower than the human dermis even though thicker and denser films were produced with lactic acid. Assessment of the swelling behavior revealed that only high molar mass (HMM) chitosan films may be regarded as absorbent dressings. Moreover, unplasticized HMM lactate (HMM-LA) films furnished lower stiffness and higher percent strain break as compared to acetate films, due to the plasticizing effect of the remaining lactic acid as alluded by the FTIR analysis. Meanwhile, they provided suitable level of moisture and indicated substantial antibacterial activity against S. aureus and E. coli, the most commonly opportunistic bacteria found in infected skin wound. Plasticized chitosan films doped with MSO were significantly thicker and more permeable to water compared to unplasticized films. Furthermore, MSO significantly potentiate the antibacterial effect of chitosan-based films. Therefore, plasticized HMM-LA/MSO chitosan film flashing good swelling behavior, adequate WVTR and WVP, suitable mechanical properties and antibacterial performances substantiated to be a promising antibacterial dressing material for moderately exuding wounds.

Agaricus blazei Murill extract-loaded alginate/poly (vinyl alcohol)-based microgels as potential wound dressings

The development of new biomaterials based on natural products for wound treatment is a frequent research topic in recent years. In this study, the hydroalcoholic extract from Agaricus blazei Murill (EAb) was incorporated in microgels based on poly (vinyl alcohol) (PVA) and sodium alginate (SA). Microgels were characterized according to their physicochemical and morphological properties. An in vivo wound healing assay was performed and histomorphometric parameters and oxidative stress were studied. The physicochemical characterizations showed the occurrence of intermolecular interactions between both polymers and this natural product, suggesting a potential physical cross-linking. The microgels presented sol-gel transition (G’ > G’’) at low frequencies, porosity degree around 40 % and significant ability to scavenge the DPPH radical. Morphological characterization evidenced pores on the micrometric scale, where EAb granules (0.3–0.6 µm) are trapped. On the 14th day, mice treated with EAb-loaded microgels presented wound contraction > 99 %, as well as greater epidermis and dermis thickness, higher density of type I collagen and significant reduction in oxidative stress. Our results showed that EAb-loaded microgels, especially the M0.5 formulation, are a promising multifunctional biomaterial for wound dressing applications.

Nano hydrogel with bacterial nanocellulose and bitter almond oil nanoemulsions for enhanced wound healing: In-vivo and in-vitro characterization

Biocompatibility, good mechanical properties, infection prevention, and anti-inflammatory are the requirements of an ideal wound dressing for the care and treatment of skin wounds. In this study, the nanohydrogels as wound dressing, were fabricated by bacterial nanocellulose (BNC), polyvinyl alcohol (PVA), and gellan gum. Bitter almond oil nanoemulsion (BAO-NE) was made with ultrasonic force and incorporated into the nanohydrogels in concentrations of 2, 4, and 6 %. The mechanical and physicochemical analyses such as tensile strength (TS), elongation at break (EB), swelling, water vapor transmission rate (WVTR), degradation, FTIR-ATR, and SEM, and anti-inflammatory, antibacterial, etc. properties of the nanohydrogels were investigated. Also, the wound healing ability was evaluated by in-vivo analyses. The molecular analyses of the expression of genes related to collagen production and inflammation were performed. Increasing BAO-NE concentration enhanced anti-inflammatory and antibacterial activities against Gram-negative and Gram-positive bacteria (P < 0.05). The in-vivo study presented the healing role of nanohydrogels in rat wounds. Real-time PCR results confirmed the anti-inflammatory and healing effects of the films at molecular levels. All the results testify to the promising properties of the fabricated nanohydrogels as a potential wound dressing.

Bioassay-guided fractionation of Verbascum thapsus extract and its combination with polyvinyl alcohol in the form electrospun nanofibrous membrane for efficient wound dressing application

Verbascum thapsus (V. thpsus), family Scrophulariaceae, has considerable importance in traditional medicine worldwide because of its antioxidant and anti-inflammatory activities. V. thpsus was used in traditional medicines as a useful drug for lung disease, sore throat, wound healing, and treatment of whooping cough. The aim of this study was to extract of V. thpsus bioactive fraction using antibacterial assay guided fractionation methodology and develop a system based on electrospun nanofibrous membrane (NFM) that can be effective by releasing the extract of V. thapsus for antibacterial and wound healing applications. For this purpose, the fractionation of total extract was done using Liquid-Liquid extraction method. The selected fraction based on its anti-bacterial activity was then subjected to the silica gel column chromatography for further purification. Since electrospinning is an economical and relatively simple method to produce continuous and uniform nanofibers, and due to its high specific surface area, adjustable pore size, and flexibility, special attention has been paid to loaded the most effective fraction on PVA nanofibers for applications such as wound dressings. The obtained result showed that, the purified V. Thapsus extract has a concentration-dependent antimicrobial activity against Escherichia coli and Staphylococcus aureus. The phytochemically analyses of bioactive fraction by High-performance liquid chromatography (HPLC) proved the presence of 6 phenolic acids, 4-hydroxybenzoic acid, chlorogenic acid, caffeic acid, p-coumaric acid, ferulic acid, and flavonoid, rutin, as the major compounds. Also, physicochemical characterization of PVA-selected extract loaded electrospun nanofibrous membranes (NFM) were analyzed by scanning electron microscope (SEM), Fourier transform infrared spectrometer (FT-IR). MTT and hemolysis assays were done to affirm the biocompatibility of fabricated scaffolds. Release profile of extract loaded- NFM showed continues release of extract from mat during 90h. Moreover, the capability of these NFM in wound healing application was evaluated in-vitro and in-vivo. The cell viability test (MTT), cell adhesion images, antioxidant, antibacterial, hemolysis assays and in-vitro and in-vivo wound healing assays confirmed that fabricated NFM containing 5 % butanolic extract were the most biocompatible scaffold for wound dressing applications and accelerates the rate of wound closure. The obtained outcomes confirmed that V. thpsus/PVA NFM can be considered as promising scaffold for potential wound dressings.

Water‐soluble astaxanthin and silver enriched poly(vinyl alcohol)/silk fibroin crosslinking electrospun nanofiber for wound dressing

AbstractThe aim of this work is to fabricate a novel electrospun poly(vinyl alcohol) (PVA)/silk fibroin (SF) nanofibrous membrane containing astaxanthin (ASTA) and silver (Ag) nanoparticles as potential wound dressing. Since ASTA is typically liposoluble, the bioavailability could be greatly enhanced by improving its hydrophilicity. The antioxidant performance of eletrospun membrane is verified by ABTS radical scavenging assays. The beadless fibers could be fabricated at 16 kV when PVA (12, wt%) is blended with SF (6, wt%). In addition, the membrane is carefully chemically crosslinked by comparing the efforts (i.e., mechanical strength and water resistance) of glutaraldehyde dipping and vapor treatment. The morphology of the electrospun membrane is observed by scanning electron microscopy and optical microscope. The formation of Ag nanoparticles, which provides the membranes antibacterial properties, is also confirmed by energy dispersive spectroscopy and inhibition zone test. Meanwhile, the PVA/SF/ASTA/Ag compound membrane is characterized by Fourier transform infrared spectroscopy, x‐ray diffraction, thermo gravimetric analysis, differential thermal analysis, and water contact angle. The releasing of ASTA is also measured, and kinetic data are adjusted by Higuchi models. Finally, the biocompatibility is confirmed by in vitro cell staining experiments and in vivo rat models.

Bacterial cellulose-turmeric powder composites as potential therapeutic wound dressings

Bacterial cellulose (BC) has emerged as a promising biomaterial for rapid wound healing and tissue regeneration due to its excellent liquid absorbing and biocompatible properties. However, its lack of therapeutic properties restricts its applicability as a wound dressing. The current study was undertaken to develop bacterial cellulose-turmeric powder (BC-TP) composite films as wound dressing materials that combine the therapeutic properties of turmeric powder (TP) with the unique structural, physicochemical, and biological properties of BC. FTIR and SEM showed that TP was successfully impregnated into BC films using an ex-situ approach. Swelling and water release rate studies revealed that the composite films produced had high-water uptake and retention capacities. Antibacterial investigations using gram-positive and -negative species demonstrated the significant antibacterial potential of TP when incorporated into a BC matrix. Toxicity testing confirmed the non-cytotoxic nature of BC-TP composite films, while biocompatibility investigations demonstrated that fibroblast cells attached and proliferated effectively on BC films treated with TP. Furthermore, BC-TP composites promoted tissue regeneration, hair growth, and wound healing. BC composites exhibited over 90% wound closure by the 7th day, whereas untreated wounds demonstrated only approximately 24% closure during the same period. The study shows that the manufactured BC-TP composite films offer starting points for the development of alternative standard wound dressing systems.

Cowberry extract loaded chitosan hydrogel with photothermal and antioxidant properties promotes infected wound healing

Bacterial infection and oxidative stress impede clinical wound healing. Herein, the plant-derived cowberry extract (CE) was first explored as a natural photothermal agent and antioxidant to deal with bacterial infection and oxidative stress. After loading in the carboxymethyl chitosan (CMCs)/oxidized dextran (Odex) hydrogel, the photothermal effect of CE was highly enhanced by CMCs. The controlled temperature induced by CE-containing hydrogel under NIR laser irradiation could rapidly (10 min) and effectively kill Staphylococcus aureus (S. aureus, 99.3 %) and Escherichia coli (E. coli, 94.6 %). Besides, this hydrogel exhibited a fast gelation and hemostasis abilities, high stability, adhesion and ROS scavenging capabilities, as well as good injectability and biocompatibility. Above superior properties make this hydrogel to accelerate the wound healing in S. aureus-infected mice, and it is expected to be a potential clinical wound dressing.

Electrospun nylon 6/hyaluronic acid/chitosan bioactive nanofibrous composite as a potential antibacterial wound dressing.

Hyaluronic acid (HA) and chitosan (CS), as natural biomaterials, display excellent biocompatibility and stimulate the growth and proliferation of fibroblasts. Furthermore, nylon 6 (N6) is a low-cost polymer with good compatibility with human tissues and high mechanical stability. In this study, HA and CS were applied to modify N6 nanofibrous mat (N6/HA/CS) for potential wound dressing. N6/HA/CS nanofibrous composite mats were developed using a simple one-step electrospinning technique at different CS concentrations of 1, 2, and 3 wt%. The results demonstrated that incorporating HA and CS into N6 resulted in increased hydrophilicity, as well as favorable physical and mechanical properties. In addition, the minimum inhibitory concentration and (MIC) optical density techniques were used to determine the antibacterial properties of N6/HA/CS nanofibrous composite mats, and the results demonstrated that the composites could markedly inhibit the growth of Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli. Because of its superior mechanical properties, substantial antimicrobial effects, and hydrophilic surface, N6/HA/CS at 2 wt% of CS (N6/HA/CS2) was chosen as the most suitable nanofibrous mat. The swelling, porosity, gel content, and in vitro degradation studies imply that N6/HA/CS2 nanofibrous composite mat has proper moisture retention and biodegradability. Furthermore, the N6/HA/CS2 nanofibrous composite mat was discovered to be nontoxic to L929 fibroblast cells and to even improve cell proliferation. Based on the findings, this research offers a simple and rapid method for creating material that could be utilized as prospective wound dressings in clinical environments.

Innovative approaches to wound healing: insights into interactive dressings and future directions.

The objective of this review is to provide an up-to-date and all-encompassing account of the recent advancements in the domain of interactive wound dressings. Considering the gap between the achieved and desired clinical outcomes with currently available or under-study wound healing therapies, newer more specific options based on the wound type and healing phase are reviewed. Starting from the comprehensive description of the wound healing process, a detailed classification of wound dressings is presented. Subsequently, we present an elaborate and significant discussion describing interactive (unconventional) wound dressings. Latter includes biopolymer-based, bioactive-containing and biosensor-based smart dressings, which are discussed in separate sections together with their applications and limitations. Moreover, recent (2-5 years) clinical trials, patents on unconventional dressings, marketed products, and other information on advanced wound care designs and techniques are discussed. Subsequently, the future research direction is highlighted, describing peptides, proteins, and human amniotic membranes as potential wound dressings. Finally, we conclude that this field needs further development and offers scope for integrating information on the healing process with newer technologies.

Multifunctional Bi-layer collagen nanofiber-collagen/PLLA/Zataria multiflora essential oil nanofiber for wound healing: Antibacterial, antifungal and antioxidant properties

Multi-layer electrospun structures have attracted interests as multifunctional wound dressings. In the present study, a double-layered nanofibrous construct was prepared out of pure type I collagen nanofibers (as the inner layer) and collagen/PLLA/Zataria Multiflora essential oil (as the outer layer). Extracted essential oil was analyzed by GC–Mass Spectrometry. Bi-layers were characterized by SEM, ATR-FTIR and XRD. Water contact angle and swelling studies demonstrated hydrophilicity and a high water absorption capability (1504% of the initial weight) of the nanofibers, respectively. Also, the essential oil showed a strong antioxidant activity (IC50: 7.4 ppm). Cumulative release profile of the essential oil from nanofibers illustrated a burst release in about 120 min and then, a sustained release up to 72 h. Broth micro-dilution, disk diffusion and AATCC 100 assays were performed and the bi-layer dressings exhibited strong antibacterial activity (against Bacillus subtilis, Staphylococcus aureus, Pseudomonas aeruginosa and Escherichia coli) and antifungal activity against 4 Candida species. Viability of the fibroblast cells on the obtained structures was evaluated by alamar blue and live/dead assays that confirmed appropriate cyto-compatibility of the nanofibers. Therefore, biocompatible double-layered constructs with strong antimicrobial, antioxidant and water absorption capabilities would be promising as potential wound dressings.

Design of Poly(lactic) acid/gelatin core-shell bicomponent systems as a potential wound dressing material

The electrospun core-shell nanofiber has great many advantages such as different types of solvents that can be used for changing flexibility, mechanical properties, or surface chemistry of fiber. Hydrophobic Poly(lactic) acid (PLA) and hydrophilic gelatin (Gel) were electrospun by various preparation conditions to design perfect bicomponent PLA:Gel nanofiber in a core-shell structure. Solvent types, the concentration of polymeric components, flow rate, and voltage of the electrospinning process were changed to optimization of nanofiber. According to the SEM images, the best nanofiber structure without beads was obtained at 0.4 ml/h flow rate of PLA solution and 1.2 ml/h flow rate of Gel solution at 45:55 (w:w %) weight ratio of PLA:Gel in trifluoroethanol solvent with a 10 kV voltage at 10 cm distance to the collector. From the TEM images, the existence of the core-shell structure had been proved which all prepared nanofibers with 2,2,2-Trifluoroethanol solvent. Furthermore, contact angle measurements showed a change in wettability when the Gel amount was increased. Therefore, the mildest synthesis conditions were determined for bicomponent PLA:Gel core-shell nanofibers as a potential wound dressing and dual drug carrier materials.

Highly Absorbent Egg White/Carbomer-940 Hydrofilm as a Potential Diabetic Wound Dressing.

Diabetic foot ulcer (DFU) is the most critical problem in diabetic patients. Managing exudate in this kind of wound presents significant challenges in clinics. Advanced wound dressings serve as the most effective approach to managing DFU. Herein, a highly absorbent hydrofilm is presented through a combination of egg white (EW) and Carbomer-940, benefiting from the bioactivity of the EW component and superabsorption capacity of Carbomer-940. The crystallinity of samples rises due to the presence of Carbomer-940. Regarding the high water absorption capacity of Carbomer-940, the swelling ratio and water-holding capacity of samples are also improved via its incorporation of up to 1005%. In contrast, the transmission of water vapor and in vitro degradation rate decreases as Carbomer-940 powers the crystallinity of hydrofilms. Carbomer-940 incorporation in the EW structure accelerates protein release during the time, while this acceleration is partially compensated by the crystallization effect. The cell viability assay demonstrates no toxicity as well as high human foreskin fibroblast cell proliferation for the hybrid hydrofilm sample, where the cell migration is positively affected in the presence of the bioactive components extracted from the dressing. Taken together, the optimized hybrid hydrofilm could be suggested as a promising wound dressing for managing DFUs.