Potential Sources Of Contamination Research Articles

Parasitological assessment of some fruits and vegetables commonly sold in retail outlets in the Mfoundi Division of Cameroon

BackgroundFruits and vegetables are very important for human diet as they provide all the nutrients needed to be healthy with just a daily-recommended intake of 400 to 600 mg. However, they constitute one of the major sources of human infectious agents. Thus monitoring of the microbial contaminants of the fruits and vegetables is very crucial for human safety. MethodA cross sectional study was conducted on fruits and vegetables in four markets (Mfoundi, Mokolo, Huitième and Acacia) of the Yaoundé city from October 2020 to March 2021. In all, 528 samples were purchased (carrots, cucumbers, cabbages, lettuces, leeks, green beans, okra, celeries, pepper, green peppers and tomatoes) and processed for infective agents using the centrifugation methods (Formalin, distilled and saline water). Seventy-four (74) soil/water samples collected from the sale environment were analysed using the same technics. ResultsOverall, 149/528 (28.21%) were contaminated by at least one infective agent: 130 (24.62%) and 19 (3.6%) having one and two pathogen species respectively. Vegetables had high contamination rate (22.34%) than fruits (5.87%). Lettuce (52.08%), carrot (41.66%) and cabbage (35.41%), were the most contaminated while okra was the least (6.25%). Candida spp. (14.01%) and larva of Strongyloides stercoralis (7.76%) were more observed while Hookworms (1.13%) was the least. Frequency of Strongyloides stercoralis (p = 0.001) and Candida spp. (p = 0.01) were statistically high than other pathogens. Contamination rates were similar for washed (27.65%) and unwashed (28.78%) samples before sale. Candida spp. (p = 0.001), Strongyloides stercoralis (p = 0.01) and Entamoeba histolytica/dispar (p = 0.017) showed significant contamination rates by month. Contamination trends were high in the rainy season (42.6%) than the dry season (15.1%). Correlation between environment and products sold revealed same pathogens in both cases. ConclusionThe study highlights that the sale environment and products constitute potential source of microbial contamination. These data raised the concern of stakeholders about health risk related to vegetables and fruits sold in some local markets in Cameroon. Thus the necessity for them to development more appropriate policies on the surveillance of sale environment and on the management of these products during the different process phases by the population.

Potential sources of microplastic contamination in laboratory analysis and a protocol for minimising contamination.

Measurements of microplastics in environmental and biological samples can be overestimated because of contaminants introduced during the analytical process. Knowledge of the potential sources and frequency of contamination during analysis is required to develop a protocol to prevent analytical errors. In this study, potential sources of contamination in the laboratory analysis of biological samples were evaluated, and reliable, inexpensive measures to prevent contamination were tested. Glass fibre filters, water samples, air samples, and chemicals [Fenton's reagent (H2O2 and FeSO4), and ZnCl2] were tested for the presence of contaminants. Particulate contamination, including microplastics, was found in all samples when tested before application of any preventative measures. The following measures were evaluated for preventing contamination: (1) filtration of the water and chemical solutions using a glass fibre filter, (2) pre-combustion of the glass fibre filters, and (3) use of a clean booth for experimental work. The preventative measures reduced the levels of microplastics in all samples by 70-100%. The dominant polymers identified by Fourier transform infrared spectroscopy were polyethylene terephthalate, cellulose fibre (rayon), polystyrene, polyacrylonitrile, and polyethylene. With the preventative measures, the number of microplastics in the laboratory blanks was low enough to set the limit of detection to < 1. This limit of detection would be suitable for examination of microplastics contamination at the individual organism level, even at trace levels. Preventative countermeasures are essential to reduce overestimation of microplastics in biological samples and can be implemented at low cost.

The Crucial Role of Microbiological Testing in Ensuring Safety and Efficacy of Medical Devices: An Overview

Microbiological testing is a critical aspect of the development and evaluation of medical devices, as it plays a vital role in ensuring their safety and efficacy. This article highlights the importance of microbiological testing in medical device development and the various types of tests that are commonly performed. Microbiological testing is essential for assessing the potential risks associated with medical devices, such as bacterial contamination or infections. Testing can also help to identify potential sources of contamination during the manufacturing process and to monitor the efficacy of sterilization methods. In addition, microbiological testing is crucial in determining the appropriate usage and maintenance procedures for medical devices. By providing accurate and reliable data, microbiological testing can aid in the development of safe and effective medical devices, while also ensuring compliance with regulatory standards. Overall, this article emphasizes the critical role of microbiological testing in the development and evaluation of medical devices, and highlights its significance in maintaining patient safety and improving health care outcomes.

Metal and semimetal loadings in sediments and water from mangrove ecosystems: A preliminary assessment of anthropogenic enrichment in São Tomé island (central Africa)

Mangroves act as buffer areas for marine systems, providing a barrier to contamination from continental sources by retaining metal pollutants. This study evaluates metal and semimetal contamination in the water column and sediments of four mangroves located on the volcanic island of São Tomé. Several metals had a widespread distribution, with occasional high concentrations, linked to potential sources of contamination. However, the two smaller mangroves, located in the northern part of the island, tended to have high metal concentrations. Arsenic and chromium concentrations were notably concerning, particularly if we consider this is an isolated and non-industrialized island. This work highlights the need for further assessments and a better understanding of processes and implications of metal contamination in mangroves. This assumes a particular relevance in areas that have specific geochemical compositions (i.e., volcanic origin) and in developing countries, where people often rely directly and heavily on resources obtained from these ecosystems.

Projection of Sediment Loading from Pearl River Basin, Mississippi into Gulf of Mexico under a Future Climate with Afforestation.

Sediment load in rivers is recognized as both a carrier and a potential source of contaminants. Sediment deposition significantly changes river flow and morphology, thereby affecting stream hydrology and aquatic life. We projected sediment load from the Pearl River basin (PRB), Mississippi into the northern Gulf of Mexico under a future climate with afforestation using the SWAT (Soil and Water Assessment Tool)-based HAWQS (Hydrologic and Water Quality System) model. Three simulation scenarios were developed in this study: (1) the past scenario for estimating the 40-year sediment load from 1981 to 2020; (2) the future scenario for projecting the 40-year sediment load from 2025 to 2064, and (3) the future afforestation scenario that was the same as the future scenario, except for converting the rangeland located in the middle section of the Pearl River watershed of the PRB into the mixed forest land cover. Simulations showed a 16% decrease in sediment load for the future scenario in comparison to the past scenario due to the decrease in future surface runoff. Over both the past and future 40 years, the monthly maximum and minimum sediment loads occurred, respectively, in April and August; whereas the seasonal sediment load followed the order: spring > winter > summer > fall. Among the four seasons, winter and spring accounted for about 86% of sediment load for both scenarios. Under the future 40-year climate conditions, a 10% reduction in annual average sediment load with afforestation was observed in comparison to without afforestation. This study provides new insights into how a future climate with afforestation would affect sediment load into the northern Gulf of Mexico.

Per- and polyfluorinated alkyl substances (PFAS) in Pennsylvania surface waters: A statewide assessment, associated sources, and land-use relations

The objectives of this study are to identify per- and polyfluoroalkyl substances (PFAS) in Pennsylvania surface waters, corresponding associations with potential sources of PFAS contamination (PSOC) and other parameters, and compare raw surface water concentrations to human and ecological benchmarks. Surface water samples from 161 streams were collected in September 2019 and were analyzed for 33 target PFAS and water chemistry. Land use and physical attributes in upstream catchments and geospatial counts of PSOC in local catchments are summarized. The hydrologic yield of the sum of 33 PFAS (∑PFAS) for each stream was computed by normalizing each site's load by the drainage area of the upstream catchment. Utilizing conditional inference tree analysis, the percentage of development (>7.58 %) was identified as a primary driver of the ∑PFAS hydrologic yields. When percentage of development was removed from analysis, ∑PFAS yields were closely related to surface water chemistry associated with landscape alteration (e.g., development or agricultural cropland), such as concentrations of total nitrogen, chloride, and ammonia, but also to count of water pollution control facilities (agricultural, industrial, stormwater, and/or municipal waste pollution abatement facilities). In oil and gas development regions, ∑PFAS yields were associated with combined sewage outfalls. Sites surrounded by ≥2 electronic manufacturing facilities had elevated ∑PFAS yields (median = 241 ng/s/km2). Study results are critical to guide future research, regulatory policy, best practices that will mitigate PFAS contamination, and the communication of human health and ecological risks associated with PFAS exposure from surface waters.

Microbial Colonization of Capsular Traction Sutures in Hip Arthroscopic Surgery.

A common practice in hip arthroscopic surgery is the utilization of capsular traction sutures that can be incorporated into the capsular repair site at the end of the procedure, potentially seeding the hip joint with colonized suture material. To investigate the rate of the microbial colonization of capsular traction sutures used during hip arthroscopic surgery and to identify patient-associated risk factors for this microbial colonization. Cross-sectional study; Level of evidence, 3. A total of 50 consecutive patients who underwent hip arthroscopic surgery with a single surgeon were enrolled. There were 4 braided nonabsorbable sutures utilized for capsular traction during each hip arthroscopic procedure. These 4 traction sutures and 1 control suture were submitted for aerobic and nonaerobic cultures. Cultures were held for 21 days. Demographic information was collected, such as age, sex, and body mass index. All variables underwent bivariate analysis, and variables with a P value <.1 underwent further analysis in a multivariate logistic regression model. One of 200 experimental traction sutures and 1 of 50 control sutures had a positive culture. Proteus mirabilis and Citrobacter koseri were isolated in both these positive experimental and control cultures from the same patient. Age and traction time were not significantly associated with positive cultures. The rate of microbial colonization was 0.5%. The rate of the microbial colonization of capsular traction sutures used in hip arthroscopic surgery was low, and no patient-associated risk factors were identified for microbial colonization. Capsular traction sutures used in hip arthroscopic surgery were not a significant potential source of microbial contamination. Based on these results, capsular traction sutures can be incorporated in capsular closure with a low risk of seeding the hip joint with microbial contaminants.

Occurrence and limited zoonotic potential of Cryptosporidium spp., Giardia duodenalis, and Balantioides coli infections in free-ranging and farmed wild ungulates in Spain

Little information is currently available on the occurrence and molecular diversity of the enteric protozoan parasites Cryptosporidium spp., Giardia duodenalis, and Balantioides coli in wild ungulates and the role of these host species as potential sources of environmental contamination and consequent human infections. The presence of these three pathogens was investigated in eight wild ungulate species present in Spain (genera Ammotragus, Capra, Capreolus, Cervus, Dama, Ovis, Rupicapra, and Sus) by molecular methods. Faecal samples were retrospectively collected from free-ranging (n = 1058) and farmed (n = 324) wild ungulates from the five Spanish bioregions. Overall infection rates were 3.0% (42/1382; 95% CI: 2.1–3.9%) for Cryptosporidium spp., 5.4% (74/1382; 95% CI: 4.2–6.5%) for G. duodenalis, and 0.7% (9/1382; 95% CI: 0.3–1.2%) for B. coli. Cryptosporidium infection was detected in roe deer (7.5%), wild boar (7.0%) and red deer (1.5%), and G. duodenalis in southern chamois (12.9%), mouflon (10.0%), Iberian wild goat (9.0%), roe deer (7.5%), wild boar (5.6%), fallow deer (5.2%) and red deer (3.8%). Balantioides coli was only detected in wild boar (2.5%, 9/359). Sequence analyses revealed the presence of six distinct Cryptosporidium species: C. ryanae in red deer, roe deer, and wild boar; C. parvum in red deer and wild boar; C. ubiquitum in roe deer; C. scrofarum in wild boar; C. canis in roe deer; and C. suis in red deer. Zoonotic assemblages A and B were detected in wild boar and red deer, respectively. Ungulate-adapted assemblage E was identified in mouflon, red deer, and southern chamois. Attempts to genotype samples positive for B. coli failed. Sporadic infections by canine- or swine-adapted species may be indicative of potential cross-species transmission, although spurious infections cannot be ruled out. Molecular evidence gathered is consistent with parasite mild infections and limited environmental contamination with (oo)cysts. Free-ranging wild ungulate species would not presumably play a significant role as source of human infections by these pathogens. Wild ruminants do not seem to be susceptible hosts for B. coli.

Characterization of ready-to-eat fish surface as a potential source of contamination of Vibrio parahaemolyticus biofilms

The worldwide consumption of ready-to-eat seafood products has steadily increased due to a range of health benefits. However, depending on the handling or cutting process of raw fish, ready-to-eat sashimi can be exposed to microbiological risks that can lead to foodborne infection by marine pathogens. Since surface characteristics are key factors for microbial adhesion and biofilm formation, the present study aims to determine the correlation between raw fish skin properties and Vibrio parahaemolyticus biofilm formation. We analyzed V. parahaemolyticus biofilms (ATCC 17802; initially inoculated ca. 2 or 4 log CFU/cm2) on fish skin (gizzard shad, pomfret, red snapper, and mackerel; fish species served as sashimi without peeling the skin) formed under simulated marine environments (incubating in artificial seawater with rocking motion at 30 °C, the maximum temperature of seasonal seawater) for 24 h. The characteristics of fish skin were determined using confocal laser scanning microscopy/scanning electron microscopy. V. parahaemolyticus showed higher biofilm counts on fish skins than on stainless steel, which was used as a control (P < 0.05). In particular, V. parahaemolyticus formed biofilms with significantly higher levels of bacterial populations on gizzard shad and pomfret (ca. 5 log CFU/cm2; P < 0.05), highlighting the relationship between the biofilm formation level and the characteristics of gizzard shad and pomfret skins. The surface roughness of fish skins, including the main roughness parameters (Ra, Rq, and Rz), influenced the attachment of V. parahaemolyticus (P < 0.05). Additionally, images of V. parahaemolyticus biofilms suggested that different topographical profiles of fish species (e.g., mucus, unique structural features, etc.) could cause V. parahaemolyticus to exhibit different biofilm phenotypes, such as sticking to or entangling on the fish skin surface. The major findings of this study provide various phenotypic adhesions of V. parahaemolyticus to fish skin in considerations of the potential hazard for the consumption of ready-to-eat sashimi served with its skin.

Per- and polyfluoroalkyl substances: using comparative medicine to understand exposure and adverse health outcomes in people and their pets.

One of the important human health benefits of keeping pets may be to serve as an early warning system for indoor childhood exposure to toxic chemicals such as per- and polyfluoroalkyl substances (PFAS). The stain-resistant properties and environmental stability of PFAS make them a preferred choice for protective coatings and lubricants, and they have been used for years in various manufacturing and industrial processes around the world. Although the use of PFAS has arguably improved many commercial products, they have been linked to adverse health outcomes such as developmental delays, liver damage, immune suppression, disruption of endocrine and reproductive systems, and some cancers. The current body of literature suggests that serum PFAS levels in dogs and cats are analogous to their human counterparts and that household pets experience similar changes in blood chemistry markers. The proximity of small children and household pets to PFAS-treated carpets and floors, in addition to their tendency to put things into their mouths, potentially allows pets to serve as sentinels for household PFAS exposure. To assess the suitability of pets as indicators for exposure, researchers need to understand the most likely sources of PFAS exposure for household pets and identify the biomarkers of biological effects in those animals. Understanding these parameters may alert veterinary clinicians to potential sources of contamination in the home and ultimately protect the lives of the children and animals who live there.

Kajian perilaku higiene sanitasi penjamah makanan sekitar sekolah dasar pada wilayah desa dan kota selama masa pandemi Covid-19

Food handlers with poor knowledge of food born diseases and poor personal hygiene can be potential sources of food contamination. This study aimed to analyze food handlers' knowledge, attitudes, and hygiene practices around elementary schools in Banyumas. This research was conducted using a cross-sectional study design, has been conducted at Banyumas in 2020. The multistage sampling method determined the number of subjects as many as 150 food handlers. Data on characteristics, knowledge, attitudes, and practices were obtained by interview and analyzed using Mann Whitney and spearman correlation test. The results showed no significant difference in the knowledge (p= 0,287) and attitudes (p= 0,689) of subjects who lived in rural and urban areas. There was a significant difference in the average practice score between subjects living in rural and urban areas (p= 0,000). The Spearman correlation test showed a relationship between knowledge-attitudes of subjects living in rural (p= 0,002) and urban (p= 0,000). There was a relationship between the knowledge practice of the subject who lived in rural (p= 0,015) and urban (p= 0,000). There was no relationship between the attitudes and practices of the subject in rural (p= 0,122) and urban areas (p= 0,819). In conclusion, there was a relationship between knowledge-attitude and knowledge-practice of hygiene and sanitation in rural and urban areas. There was no relationship between attitude and practice in rural or urban areas.

Draft Genome Sequences of 110 Shiga Toxin-Producing Escherichia coli Isolates Collected from Bovine Manure Samples in the Southern United States.

Shiga toxin-producing Escherichia coli (STEC) bacteria continue to impact the food industry. Environmental sampling of potential sources of contamination is important to aid epidemiologic efforts in tracking foodborne illnesses throughout the United States. Here, the draft genome sequences of 110 STEC isolates from bovine manure collected in Florida and Texas are reported.

Pulmonary Aspergillosis in Humboldt Penguins-Susceptibility Patterns and Molecular Epidemiology of Clinical and Environmental Aspergillus fumigatus Isolates from a Belgian Zoo, 2017-2022.

Aspergillus fumigatus is the main causative agent of avian aspergillosis and results in significant health problems in birds, especially those living in captivity. The fungal contamination by A. fumigatus in the environment of Humboldt penguins (Spheniscus humboldti), located in a Belgian zoo, was assessed through the analysis of air, water, sand and nest samples during four non-consecutive days in 2021-2022. From these samples, potential azole-resistant A. fumigatus (ARAF) isolates were detected using a selective culture medium. A total of 28 veterinary isolates obtained after necropsy of Humboldt penguins and other avian species from the zoo were also included. All veterinary and suspected ARAF isolates from the environment were characterized for their azole-resistance profile by broth microdilution. Isolates displaying phenotypic resistance against at least one medical azole were systematically screened for mutations in the cyp51A gene. A total of 14 (13.6%) ARAF isolates were identified from the environment (n = 8) and from Humboldt penguins (n = 6). The TR34/L98H mutation was observed in all resistant environmental strains, and in two resistant veterinary strains. To the best of our knowledge, this is the first description of this mutation in A. fumigatus isolates from Humboldt penguins. During the period 2017-2022, pulmonary aspergillosis was confirmed in 51 necropsied penguins, which reflects a death rate due to aspergillosis of 68.0%, mostly affecting adults. Microsatellite polymorphism analysis revealed a high level of diversity among environmental and veterinary A. fumigatus isolates. However, a cluster was observed between one veterinary isolate and six environmental strains, all resistant to medical azoles. In conclusion, the environment of the Humboldt penguins is a potential contamination source of ARAF, making their management even more complex.

From ash to oxides: Recovery of rare-earth elements as a step towards valorization of coal fly ash waste

Coal fly ash (CFA) is both a valuable waste material and a potential source of environmental contamination. The inclusion of metals such as rare-earth elements offer a possible incentive towards waste valorization if the metals can be extracted and recovered in an economical manner. Rare-earth elements (REEs) have many technological applications and are critically important in the manufacture of electric vehicles, communication devices, and industrial magnets. However, the global supply of rare-earth elements has faced shortages and price shocks. Current methods for separating and isolating individual rare-earth elements use large amounts of energy and organic solvents, raising concerns over environmental impacts. These factors have led to the investigation of nontraditional sources and separation techniques for these elements. We describe a column-based system that uses a newly developed ligand-associated organosilica sorbent to concentrate and separate rare-earth elements from fly ash leachate. The fly ash used in this study originally contained 0.024 wt% rare-earth elements and the final oxide powder after enrichment contained > 10 wt% rare-earth elements, which is a enrichment of > 400 times. This process requires no additional organic solvents after the sorbent media has been synthesized, offering an alternative to the current standard using solvent extraction for rare-earth element recovery.

Spatial distribution and characteristics of microplastics and associated contaminants from mid-altitude lake in NW Himalaya

Despite the worldwide concern over the impact of microplastics (MPs) and associated organic contaminants, the information regarding the occurrence and characteristics of these emerging class of pollutants is limited in freshwater environment. We present data on the distribution and concentration levels of MPs and phthalate esters (PAEs) from Rewalsar Lake, a shallow eutrophic lake in Northwest Himalaya. The MPs were identified in all samples, with concentration of 13–238 particles L−1 and 750 to 3020 particles kg−1 dry weight (dw) in surface water and sediments respectively. Majority of MPs were dominated by polystyrene, polyethylene, polypropylene polymers that principally occurred in the form of pellets and fragments. The MPs distribution was different among sampling sites, being more abundant to sites in the proximity of domestic sewage effluents and high level of religious and tourist activities. The di-isobutyl phthalate, dibutyl phthalate (DBP) and its branched isomer, di(2-ethylhexyl) phthalate (DEHP) are the identified PAE congeners in sediments, and the measured total concentrations of Σ3PAE ranged from 1.69 μg/g to 4.03 μg/g dw. Notably, concentration values of DEHP were higher as compared to other detected phthalates, and exceeded recommended environmental risk limit. The findings of this study emphasize the requirement for proper waste management measures in the region to reduce entry of these pollutants into the ecosystem. Further, this work contributes to the understanding of MPs and PAEs potential contamination profiles and sources in freshwater environments, and provides valuable information for future management decisions.

Long-term monitoring of exposure to toxic and essential metals and metalloids in the tawny owl (Strix aluco): Temporal trends and influence of spatial patterns

As a result of regulatory decisions, atmospheric deposition of most toxic metals and metalloids (MEs) has decreased in Europe over the past few decades. However, little is known about how this reduction translates into exposure at higher trophic levels in the terrestrial environment where temporal trends may be spatially heterogeneous due to local current or legacy sources of emissions (e.g., industry) or long-range transport of elements (e.g., marine transport). The aim of this study was to characterize temporal and spatial trends of exposure to MEs in terrestrial food webs using a predatory bird, the tawny owl Strix aluco, as a biomonitor. Toxic (Al, As, Cd, Hg, Pb) and essential/beneficial (B, Co, Cu, Mn, Se) elemental concentrations were measured in feathers of nest-captured females from 1986 to 2016, extending a previous study published over the time-series 1986–2005 (n = 1051), in a breeding population in Norway. A drastic decline over time was shown for the toxic MEs (−97 % for Pb, −89 % for Cd, −48 % for Al, and −43 % for As) except Hg. The beneficial elements B, Mn, and Se showed oscillations but an overall decline (−86 %, −34 %, and −12 %, respectively) whereas the essentials Co and Cu did not exhibit significant trends. The distance to potential sources of contamination influenced both the spatial patterns of concentrations in owl feathers and their temporal trends. The accumulation of As, Cd, Co, Mn and Pb was overall higher in the vicinity of sites recorded as polluted, and a greater temporal decrease of As, B, and Cd concentrations was found in the areas of further distance to polluted sites. The decrease of Pb concentrations was sharper further from the coast during the 1980s than in coastal areas, while the opposite was observed for Mn. The levels of Hg and Se were higher in coastal areas, and Hg temporal trends differed according to the distance to the coast. This study highlights the valuable insights provided by long-term survey of wildlife exposure to pollutants and landscape indicators to reveal regional or local patterns and detect unexpected events, data that are crucial for regulation and conservation of ecosystem health.

PFGE analysis of Listeria monocytogenes isolates from milk, bovine clinical and bovine environment origin from Nagpur

Listeria monocytogenes, a foodborne pathogen, causes listeriosis, that mainly affects immunocompromised persons. Epidemiological investigation and molecular subtyping can be helpful in linking the specific sources of infection. Thirty-eight isolates of Listeria monocytogenes recovered from the bovine environment, milk, and bovine clinical cases were characterized by serotyping and pulse field gel electrophoresis (PFGE) to correlate the genetic links between the isolates. Serotyping revealed 3 L. monocytogenes isolates to be of serovar group 4b, 4d and 4e, 34 isolates of serovar group 1/2b, 4b, 3b, 4d, 4e, and one isolate to be serovar group 1/2a, 1/2c,3a, and 3c. The PFGE analysis revealed 38 L. monocytogenes isolate from seven different clusters combined ApaI and AscI with 80% relative genetic similarity. In comparison majority of the strains showed location and serovar wise homology in PFGE pattern than source wise. It was also observed that at the place of collection, the organisms circulate in the environment. The present findings suggested that the dairy/bovine farm environment is a potential source of contamination of L. monocytogenes in milk and animals.

Microplastics Removal from a Plastic Recycling Industrial Wastewater Using Sand Filtration

The removal of microplastic from wastewater collected from a plastic recycling facility was investigated, using a laboratory scale sand-filter. Wastewater samples were collected before and after the onsite sand-filter, for characterization for different polymer types, sizes, and shapes. A considerable difference in the characteristics and concentrations of microplastics was observed before and after onsite sand-filtration, demonstrating differences in the source of microplastics and/or potential contamination of the sand-filter operated at the facility. The distribution of different polymers showed polyethylene and polypropylene to be the main microplastics present in the wastewater samples. In the next stage, the samples were passed through a laboratory scale sand-filter column, to investigate the removal of microplastics. The laboratory scale sand-filter showed high efficiency (up to 100%) in removing microplastics of all polymer types, shapes, and sizes, demonstrating the effectiveness of this well-developed, and widely adopted, method for the removal of microplastics from wastewater. As the green shift and circular economy will result in more plastics being recycled, this study demonstrates the need for quantification of microplastic in effluents from plastic recycling facilities. This is important for devising appropriate microplastic removal strategies, and meeting potential discharge regulations that may come into effect in the future.

Distribution of 90Sr and 137Cs in biotic and abiotic elements of the coastal zone of the King George Island (South Shetland Archipelago, Antarctic Peninsula)

For many years Antarctic ecosystems have been considered pristine, however recent studies, including our results, contradict this assumption. Our comprehensive study on the activity of anthropogenic radioisotopes (137Cs and 90Sr) in the most common species of green algae, bryophytes, lichens, and vascular plants, as well as soil and guano samples collected over a large area on King George Island (South Shetland Archipelago) in the austral summer 2018/2019 clearly indicate the importance of large-scale transport in shaping the level of pollution in areas very distant from potential sources of contamination. Additionally, radioisotope pollution can be measured even after a very long period (>60 years) since their occurrence. The mean activity of 137Cs measured in lichens, bryophytes, vascular plants, green algae, soil, and guano was, respectively: 3.72 Bq kg−1dw, 3.70 Bq kg−1dw, 2.62 Bq kg−1dw, 2.26 Bq kg−1dw, 4.07 Bq kg−1dw and 2.08 Bq kg−1dw. For 90Sr mean activity in lichens, bryophytes, vascular plants, green algae, and soil was, respectively: 1.99 Bq kg−1dw, 3.05 Bq kg−1dw, 2.42 Bq kg−1dw, 1.08 Bq kg−1dw, and 6.43 Bq kg−1dw. Increased activities of 90Sr and 137Cs were observed in species collected in the area influenced by glacier melt and penguin guano.

Quantifying ecological and human health risks of metal(loid)s pollution from non-ferrous metal mining and smelting activities in Southwest China

The environmental release and transfer of heavy metal(loids) from natural and anthropogenic sources to neighboring habitats can pose an ecological threat to the exposed biota and habitat, as well as a human health risk to the residents. However, analytical tools to identify the potential contamination source(s) and assess the impact of this transfer have not been well described. Soil samples were collected from affected areas proximal to non-ferrous metal(loid)s mining and smelting facilities. Two integrated assessment methods, based on soil total metal(loid) content, included: (1) the potential ecological risk index combined with positive matrix factorization (PMF) and (2) human health risk assessment combined with PMF. Results indicated that there were four generic sources of pollution (based on PMF analyses of 115 replicated samples collected from four study areas): agricultural and industrial activities, traffic emissions, and natural sources. For ecological risk, the contribution of these metal(loid)s pollution sources were industrial activities (20.34–70.76 %), traffic emissions (18.73–56.93 %), natural sources (3.69–27.02 %), and agricultural activities (3.79–21.43 %). Health risks were higher for children than for adults. Industrial activity was a major source of non-carcinogenic risk to children (32.10–74.62 %) and adults (31.33–73.78 %), and carcinogenic risk to children (22.53–67.27 %) and adults (20.69–64.76 %). Total metal analysis indicated that As and Cd were highly enriched in the soil, but chemical fractionation revealed low As mobility. Total Cd and possibly As were the main pollutants causing the ecological risks at these contaminated sites. This study demonstrates that ecological and human health risks could be quantified to prioritize the pollution sources for reasonable contaminated site risk management.