Potential Leaching Research Articles

A screening model for predicting the potential of soil colloids-enhanced leaching of hydrophobic organic contaminants to groundwater at contaminated sites

Modeling the fate and transport of organic pollutants at contaminated sites is critical for risk assessment and management practices, such as establishing realistic cleanup standards or remediation endpoints. Against the conventional wisdom that highly hydrophobic persistent organic pollutants (POPs) (e.g., polybrominated diphenyl ethers and polycyclic aromatic hydrocarbons) in surface soils are essentially immobile, mounting evidence has demonstrated the potential of these contaminants leaching into the groundwater, due to enhanced transport by soil colloids. Here, we develop a Colloids-Enhanced Transport (CET) model, which can be used as a simple screening tool to predict the leaching potential of POPs into groundwater, as mediated by soil colloids. The CET model incorporates several processes, including the release of POPs-bearing colloids into the porewater, the vertical transport of colloids and associated POPs in the vadose zone, the mixing of POPs-containing soil leachate with groundwater, and the migration of POPs-bearing colloids in saturated zone. Thus, using parameters that can be easily obtained (e.g., annual rainfall, soil type, and common hydrogeological properties of the subsurface porous media), the CET model can estimate the concentrations of POPs in the saturated zone from the observed POPs concentrations in surface or shallow subsurface zones. The CET model can also be used to derive soil quality standards or cleanup endpoints by back-calculating soil concentrations based on groundwater protection limits.

Environmental performance of unfired bricks produced from co-disposal of mine tailings and municipal solid waste incineration fly ash based on comprehensive leaching tests

The potential leaching of heavy metals is a crucial concern for construction materials produced from solidification/stabilization (S/S) treatment of wastes. This study comprehensively evaluated the leaching characteristics of heavy metals from the unfired bricks produced from co-disposal of Pb–Zn mine tailings and municipal solid waste incineration fly ash using batch, sequential, and semi-dynamic leaching tests. The results show that S/S treatment drastically reduced the leachability of heavy metals from the unfired bricks through lowering their distribution in the acid-soluble fraction. The effective diffusion coefficients of heavy metals within unfired bricks were all below 1.55 × 10−13 cm2/s, which is indicative of low mobility in the environment. The release of heavy metals from the unfired bricks was primarily governed by diffusion and dissolution. Slaking treatment of fly ash significantly reduced the leaching of heavy metals from the unfired bricks due to their improved structural integrity and compactness, which minimizes the surface area in the solid matrix accessible by the leaching medium. The leachability indices of heavy metals within the unfired bricks ranged from 13.12 to 18.10, suggesting that they are suitable for “controlled utilization” in specific scenarios. Compared to untreated mine tailings, converting them into unfired bricks could reduce the releases of heavy metals by several to hundreds of folds. These findings demonstrate that S/S can be an effective and sustainable strategy for co-disposal of mining tailings and incineration fly ash to produce construction materials with sound long-term environmental performance.

Efficient nanostructured materials to reduce nutrient leaching to overcome environmental contaminants.

Nutrient leaching is a major reason for fresh and ground water contamination. Menthol is the major bioactive ingredient of Mentha arvensis L. and one of the most traded products of global essential oil market. The indigenous production of menthol crystals in developing countries of the world can prove to be the backbone for local growers and poor farmers. Therefore, present research was designed to check the effects of nano-structured plant growth regulators (PGRs) (28-homobrassinolide and ethephon) with reduced leaching potentials on the essential oil and menthol (%) of Mentha arvensis L. The prepared nano-formulations were characterized by Fourier transform infrared (FTIR) spectroscopy, Laser induced breakdown spectroscopy (LIBS), Differential scanning colorimetry-thermal gravimetric analysis (DSC-TGA), Scanning electron microscopy (SEM), Atomic absorption spectrometry (AAS) and Zeta potential and Zeta size analysis. The menthol (%) was determined by modified spectrophotometric and gas chromatographic (GC) method. The highest essential oil (%) was obtained by the application of 28-homobrassinolide-Zn-NPs-L-II (0.92 ± 0.09%) and ethephon-Ca-NPs-L-III (0.91 ± 0.05%) as compared to the control (0.65 ± 0.03%) and blank (0.62 ± 0.09%). The highest menthol (%) was obtained by applying 28-homobrassinolide-Ca-NPs-L-I (80.06 ± 0.07%), 28-homobrassinolide-Ca-NPs-L-II (80.48 ± 0.09%) and 28-homobrassinolide-Ca-NPs-L-III (80.84 ± 0.11%) and ethephon-Ca-NPs-L-III (81.53 ± 0.17%) and ethephon-Zn-NPs-L-II (81.93 ± 0.26%) as compared to control (67.19 ± 0.14%) and blank (63.93 ± 0.17%).

Microbial, chemical, and isotopic monitoring integrated approach to assess potential leachate contamination of groundwater in a karstic aquifer (Apulia, Italy)

Landfill sites are subjected to long-term risks of accidental spill of leachate through the soil and consequential contamination of the groundwater. Wide areas surrounding the landfill can seriously be threatened with possible consequences to human health and the environment. Given the potential impact of different coexisting anthropic pollution sources (i.e., agriculture and cattle farming) on the same site, the perturbation of the groundwater quality may be due to multiple factors. Therefore, it is a challenging issue to correctly establish the pollution source of an aquifer where the landfill is not isolated from other anthropic land uses, especially in the case of a karstic coastal aquifer. The present study is aimed at setting in place an integrated environmental monitoring system that included microbiological, chemical, and isotope methods to evaluate potential groundwater pollution in a landfill district in the south of Italy located in Murgia karstic aquifer. Conventional (microbial plate count and physical–chemical analyses) and advanced methods (PCR-ARISA, isotope analysis of δ18O, δ2H, 3H, δ 13C, δ 15N-NO3−, and δ 18O-NO3−) were included in the study. Through data integration, it was possible to reconstruct a scenario in which agriculture and other human activities along with seawater intrusion in the karst aquifer were the main drivers of groundwater pollution at the monitored site. The microbiological, chemical, and isotope results confirmed the absence of leachate effects on groundwater quality, showing the decisive role of fertilizers as potential nitrate sources. The next goal will be to extend long-term integrated monitoring to other landfill districts, with different geological and hydrogeological characteristics and including different sources of pollution, to support the ecological restoration of landfills.

Tempospatially Confined Catalytic Membranes for Advanced Water Remediation.

The application of homogeneous catalysts in water remediation is limited by their excessive chemical and energy input, weak regenerability, and potential leaching. Heterogeneous catalytic membranes (CMs) offer a new approach to facilitate efficient, selective, and continuous pollutant degradation. Thus, integrating membranes and continuous filtration with heterogeneous advanced oxidation processes (AOPs) can promote thermodynamic and kinetic mass transfers in spatially confined intrapores and facilitate diffusion-reaction processes. Despite the remarkable advantages of heterogeneous CMs, their engineering application is practically restricted due to the fuzzy design criteria for specific applications. Herein, the recent advances in CMs for advanced water remediation are critically reviewed and the design flow for tempospatially confined CMs is proposed. Further, state-of-the-art CM materials and their catalytic mechanisms are reviewed, after which the tempospatial confinement mechanisms comprising the nanoconfinement effect, interface effect, and kinetic mass transfer are emphasized, thus clarifying their roles in the construction and performance optimization of CMs. Additionally, the fabrication methods for CMs based on their catalysts and pore sizes are summarized and an overview of their application and performance evaluations is presented. Finally, future directions for CMs in materials research and water treatment, are presented.

Valorization of organic residues for lettuce production minimizes nitrogen loss in soil in comparison to mineral fertilization

The agri-food industry, produces organic residues that could be reused as fertilizer, thereby allowing the recycling of nutrients for crops and the replacement of mineral fertilizers. In this context, here we examined the capacity of anaerobic digestates and mixed residues (digestates plus spent mushroom substrates) to supply nutrients to lettuce (Lactuca sativa L.) grown in a greenhouse experiment. Moreover, the potential leaching of nutrients into the soil was evaluated in a column assay. The results obtained from organic residues treatments were then compared to those achieved in soil treated with mineral fertilizer and in untreated soil. Digestates treatments minimized the potential risk of nitrate (NO3 −) leaching by allowing the slow release of NO3 − maintaining crop yield. Given our observations, this type of organic residues emerges as an alternative to mineral fertilizer. The loss of NO3 −-N from the total amount of N applied reached ∼3% in the mixed residues treatments, 36–46% in the digestate treatments, and 68% in the mineral fertilizer treatment. The mixed treatments showed low available N content as a result of immobilization in the soil, which is a limiting factor for crop production. Moreover, the organic residues treatments had no negative effect on lettuce seed germination or plant growth with respect to parameters such as chlorophyll, total polyphenols, and heavy metals in aerial biomass. The findings reported herein contribute to a better understanding of nutrient availability provided by organic residues materials and the capacity of these amendments to replace mineral fertilizers and avoid nutrient loss by leaching.

Two-stage leaching of calcium and vanadium from high-calcium steelmaking slag

ABSTRACT Vanadium (V) is a critically important element in many industries. A widely used recovery process is a combination of roasting and leaching. However, roasting is an energy-intensive stage. Generally, basic oxygen furnace (BOF) slag is high in calcium (Ca) but low in V. Ca content and its chemical nature can prevent V leaching. This study presents a potential two-stage leaching process for Ca and V from BOF slag. The method is environmentally friendly using low temperatures and enabling leachate recycling. Furthermore, the utilisation rate of the slag can be higher due to Ca recovery. Ca is first leached using ammonium nitrate and nitric acid solution. The V-containing residue is directed to the second stage, where V is leached using ammonium carbonate ((NH4)2CO3). Ca leaching efficiency was 71% achieved with a low temperature (40°C) and in 20 min. > 99% of the dissolved element was Ca. Increasing the total nitrate concentration increased the leaching efficiency. Reducing the L/S ratio improved selectivity. The solid material was analysed after the leaching stages and a clear change was observed after the Ca-stage. The V leaching efficiency was 50%. > 88% of dissolved element was V (L/S 8, [(NH4)2CO3] 200 g/L, 60°C, and 60 min). Increasing [(NH4)2CO3] and L/S ratio slightly improved the leaching efficiency but decreased selectivity. The studied process implements circular economy principles and has been developed for side streams with low V concentrations. However, further optimisation and developments are required regarding the effectiveness of the process.

Leaching characteristics of electrochemically precipitated struvite compared to other common phosphorus fertilizers in differing soils

AbstractPhosphate‐rich struvite (MgNH4PO4·6H2O) can be reclaimed from wastewater as a fertilizer material to help provide clean water and sustainable food production. The objective of this study was to evaluate the leaching characteristics of wastewater‐recovered electrochemically precipitated struvite (ECST) compared to other common fertilizer‐P sources in soils from Arkansas (AR loam and silt loam), Missouri (MO silt loam 1 and 2), and Nebraska (NE sandy loam and silt loam). A bench‐scale, soil‐column experiment was conducted using five fertilizer‐P sources (i.e., ECST, chemically precipitated struvite [CPST], monoammonium phosphate [MAP], triple superphosphate [TSP], and an unamended control [UC]) and leached six times over 15 weeks after fertilizer application. Leachate‐P concentration changes from the UC differed among soil–fertilizer combinations over time (p < 0.05) but only in the AR‐loam, where TSP (2.0–6.6 mg L−1) consistently had a larger leachate‐P change from the UC than ECST (−0.04 to 3.1 mg L−1) in weeks 1–3. Leachate‐NO3‐N concentration changes from the UC among soils occurred only in week 1, where three of the six soils had NO3‐N concentration increases >10.7 mg L−1 from their respective UC. Though inconsistent across the various soils evaluated, P‐leaching losses relative to respective UC treatments were often larger from MAP and TSP than ECST and CPST. Results showed that P, NH4‐N, NO3‐N, Ca, Mg, and Fe leaching potentials differed among soils depending on initial soil pH and texture and fertilizer‐P source; thus, soil characteristics and fertilizer‐P source should be considered to minimize potential nutrient leaching losses.

Leaching characteristics of metals and Polycyclic Aromatic Hydrocarbons (PAHs) from asphalt paving materials

Asphalt pavement, a major type of road surface, may contain hazardous elements depending on its specific composition. A growing concern has developed regarding the potential leaching of these hazardous constituents from asphalt pavements, particularly when incorporating waste materials and additives. This study investigates the presence of heavy metals and polycyclic aromatic hydrocarbons (PAHs) in leachates from six commonly employed asphalt paving materials. A comprehensive laboratory leaching experiment was conducted on three key sample scales: asphalt binder, asphalt mortar, and asphalt mixture. The impact of the leachates was assessed by the heavy metal pollution index and the toxic equivalency factor based on the benzo[a]pyrene equivalent concentration. The results reveal that leaching tests at the binder and mortar scales provided fundamental insights into leaching characteristics within a relatively short timeframe, while the mixture-scale test was more capable of representing pollutant leaching in near-true scenarios. In addition, the results indicate potential adverse health implications associated with the incorporation of hazardous waste, such as bottom ash, into asphalt pavement. These findings hold significant implications for promoting environmentally responsible practices of asphalt pavement.

A Comprehensive Review of Remediation Strategies for Soil and Groundwater Contaminated with Explosives

This study offers an updated overview of the soil and water remediation strategies employed to address the widespread environmental and public health risks associated with explosive compounds, particularly TNT and RDX. Recognizing soil contamination originating from military activities, industrial accidents, and historical land use, this review delves into physical, chemical, and biological approaches to mitigating ecological and human health concerns. While physical methods like excavation and disposal are effective, their applicability is constrained by cost and logistical challenges for large contaminated areas. Chemical methods, such as oxidation and reduction, focus on transforming explosives into less toxic byproducts. Biological remediation utilizing plants and microorganisms emerges as a cost-effective and sustainable alternative. This review highlights challenges, including the persistence of explosive compounds, potential groundwater leaching, and the necessity for long-term monitoring. Emphasizing the need for site-specific strategies, considering the contaminant type, concentration, soil properties, and regulatory requirements, this study advocates for integrated and sustainable remediation approaches in pilot-scale applications. It concludes by evaluating the appropriate solution based on the advantages and disadvantages of the categories of soil and groundwater remediation methods. The duration, the effectiveness, and the cost of available technologies were estimated.

Managing potential environmental and human health risks of lead halide perovskite photovoltaic modules

Perovskite solar cells (PSCs) are emerging photovoltaic (PV) technologies capable of matching power conversion efficiencies (PCEs) of current PV technologies in the market at lower manufacturing costs, making perovskite solar modules (PSMs) cost competitive if manufactured at scale and perform with minimal degradation. PSCs with the highest PCEs, to date, are lead halide perovskites. Lead presents potential environmental and human health risks if PSMs are to be commercialized, as the lead in PSMs are more soluble in water compared to other PV technologies. Therefore, prior to commercialization of PSMs, it is important to highlight, identify, and establish the potential environmental and human health risks of PSMs as well as develop methods for assessing the potential risks. Here, we identify and discuss a variety of international standards, U.S. regulations, and permits applicable to PSM deployment that relate to the potential environmental and human health risks associated with PSMs. The potential risks for lead and other hazardous material exposures to humans and the environment are outlined which include water quality, air quality, human health, wildlife, land use, and soil contamination, followed by examples of how developers of other PV technologies have navigated human health and environmental risks previously. Potential experimentation, methodology, and research efforts are proposed to elucidate and characterize potential lead leaching risks and concerns pertaining to fires, in-field module damage, and sampling and leach testing of PSMs at end of life. Lastly, lower technology readiness level solutions to mitigate lead leaching, currently being explored for PSMs, are discussed. PSMs have the potential to become a cost competitive PV technology for the solar industry and taking steps toward understanding, identifying, and creating solutions to mitigate potential environmental and human health risks will aid in improving their commercial viability.

Pyrolysis of different organic feedstock combinations as soil amendments enhances the reclamation of saline-sodic soil

Utilizing agricultural wastes (e.g., straw, bagasse, manure) as amendments to remediate saline-sodic soils can be beneficial for improving soil quality and better waste management. In this study, we investigated the impact of raw and pyrolyzed feedstocks on salt leaching potential and physical and chemical properties in a saline-sodic silt loam soil. Utilizing a column experiment within a completely randomized design, we evaluated five feedstock combinations (i.e., rice husk, pine wood, cow manure, sugarcane bagasse) as amendments (69 Mg ha–1), including variations of raw feedstock and feedstock pyrolyzed at 300 and 500 °C, alongside a control (CT). For both the amended soil and the leachate, we measured electrical conductivity (EC), sodium adsorption ratio (SAR), pH and cations. Soil saturated hydraulic conductivity (KS) and bulk density (BD) were also measured. The BWR treatment (i.e., sugarcane bagasse, pine wood, and rice husk) exhibited notable improvements in soil physical quality (i.e., decreased BD and enhanced KS). Raw feedstock significantly (p < 0.01) increased soil leachate EC SAR, except for WM (i.e., pine wood and cow manure). The BWR treatments expedited the reduction of soil salinity and sodicity, evident in lower SAR/SARmax and EC/ECmax ratios, indicative of increased leaching potential. The amendments consistently demonstrated a trend of reducing soil SAR compared to the control, with raw feedstock exhibiting a more pronounced effect. Soil ECe decreased after amending with feedstock pyrolyzed at 500 °C compared to raw feedstock and pyrolyzed at 300 °C. Feedstock pyrolyzed at 300 °C did not significantly alter soil pH after leaching, and there was a decrease in the soil Na+/K+ ratio, especially with pyrolyzed feedstock. After leaching, the pyrolyzed feedstock treatments showed better soil aggregate stability (Mg2+/Ca2+<1) compared to raw feedstock. Based on the aggregated amelioration score for each amendment combination, BWR treatments consistently outperformed other combinations, with BWR300 being the most favorable option due to its lower production cost compared to BWR500. This study highlights BWR pyrolyzed at 300 °C as a suitable amendment for improving soil conditions, reducing salinity and sodicity, and increasing leaching potential.

Probabilistic analysis of georisk from capping of contaminated sediment in Gunneklev Fjord, Norway

The seabed of the Gunneklev Fjord in south-eastern Norway is covered with exceptionally soft contaminated sediment containing mercury and dioxins. The sediments have an undrained shear strength less than 1 kPa and a variable thickness of up to 2.5 m. To reduce the potential for leaching of contaminants from these sediments, Hydro Energy AS developed a remediation plan involving capping of the sediment. Significant uncertainties are associated with the sediment's undrained shear strength and the cap thickness. An unfortunate combination of low shear strength and thick cap could cause slope failure (e.g. translational sliding of the sediment and/or bearing capacity failure (e.g. punching through). Failure, particularly slope failure, can cause spreading of the contaminants in the fjord causing serious consequences. This paper presents an assessment of the probability of slope failure associated with the contaminated sediment before and after the cap placement. Probability of bearing capacity failure is considered to have more local effect and is also discussed briefly. The study used the Monte Carlo method with random undrained shear strength and sediment thickness. The simulations show high slope failure probability when the seabed inclination was ≥ 1:50 combined with an average undrained shear strength ≤ 0.4 kPa. Based on the probabilistic analyses, a pilot field testing campaign was carried out (after this study) with 20-cm thickness cap in the “gentle” sloping area and 5-cm thickness in the “steep” areas to avoid causing a failure. The analyses were used to support evidence-based decision-making on the cap design and implementation for further field testing.

Degradation and sorption of the herbicide pelargonic acid in subsoils below railway tracks compared to a range of topsoils

BackgroundPelargonic acid is a non-selective herbicide derived from natural sources with a range of potential applications in areas where synthetic herbicides may be less acceptable. One such use area is weed control on railway tracks. To assess the potential leaching of pelargonic acid to groundwater for this specific use, we conducted degradation and sorption studies with soils from railway tracks and, for comparison, with a range of topsoils.ResultsDegradation of pelargonic acid was very rapid in subsoils from railway tracks with half-lives (DT50) of < 1 day (geom. mean DT50, 5.8 h), and even faster in the selected agricultural topsoils (1.5 h). The starting concentration had a strong influence with much slower degradation at higher spike levels. Adsorption to the railway soils (alkaline soils with low organic matter content) was expectedly weak (Freundlich adsorption coefficients KF of 0.06–0.31 mL/g) and clearly stronger in the topsoils (0.2–40 mL/g). Organic carbon normalized adsorption coefficients (KFoc) ranged from 11 to 371 mL/g (all soils) and were pH dependent, consistent with the behaviour of weak acids. Computer modelling using the software PELMO and a set of scenarios for herbicide use on railway tracks developed for the authorisation in Germany yielded predicted environmental concentrations in groundwater of < 0.001 µg/L when parameterised with the adsorption and degradation endpoints from subsoils.ConclusionsThe leaching potential of pelargonic acid may be considered low even in application scenarios with sandy soils with low organic matter content such as those found below railway tracks.

Extraction Kinetics of Rare Earth Elements from Ion-Adsorbed Underclays

Citric acid has been identified as an environmentally sustainable organic acid capable of leaching up to ~30% of easily accessible REEs from underclay material. An analysis of the leaching profiles was performed to discern the reaction rates, extraction efficiencies, and potential leaching mechanisms of REEs and cations of interest from ion-adsorbed underclays. The initial leaching stage follows a slow intraparticle diffusion mechanism followed by a second stage controlled by a mixed diffusion regime. The leaching profiles of Ca and P were similar to those of REEs, suggesting that REEs are most likely derived from mineral surfaces such as hydroxyapatite or crandallite rather than predominately from underclays. Fitting to a modified diffusion control model found diffusion-controlled leaching to be the primary mechanism whereas non-diffusive mechanisms made up about 22% of the extracted REEs. Gangue cations associated with underclays had less non-diffusive leaching than REE species, indicating that their leaching kinetics may be dominated by diffusion from within the material or potentially from product layer formation. Fitting to Boyd plots further indicated that REEs were leached following intraparticle diffusion control. These results have important implications for the development of more efficient and sustainable methods for extracting REEs or critical minerals from alternative feedstocks.

Effects of Different Tillage and Fertilization Methods on the Yield and Nitrogen Leaching of Fragrant Rice

Conservation tillage and deep-side fertilization both hold the potential to reduce nitrogen leaching and improve grain yield and nitrogen use efficiency in fragrant rice cultivation practices. However, the combined impact of different tillage practices with deep-side fertilization on nitrogen leaching remains uncertain. Therefore, this study conducted on-site experiments for four rice-growing seasons in both early and late seasons in 2018 and 2019 using the fragrant rice varieties “Meixiangzhan 2” (MX) and “Xiangyaxiangzhan” (XY). The four experimental treatments included the following: conventional tillage with regular fertilization (T1), conventional tillage with simultaneous deep fertilization (T2), reduced tillage with simultaneous deep fertilization (T3), and no-tillage with simultaneous deep fertilization (T4). Our results indicate that the T4 treatment exhibited higher nitrogen leaching rates and potential nitrogen losses throughout the entire rice growth cycle, with a 4.51% increase in total mineral nitrogen leaching (TMNL) and a 1.86% increase in potential nitrogen leaching compared to T1 treatment. In contrast, the T2 treatment demonstrated the lowest nitrogen leaching rate, resulting in a 6.01% reduction in TMNL and a 9.57% decrease in potential nitrogen leaching compared to T1, demonstrating the most optimal performance. It is important to note that a reduction in nitrogen leaching does not directly translate into an increase in rice yield. Our study involved the cultivation of two fragrant rice varieties, ‘Meixiangzhan2’ (MX) and ‘Xiangyaxiangzhan’ (XY), and the results revealed some interesting insights. For MX, the T1 treatment resulted in lower daily grain outputs compared to the other treatments, with disparities ranging from 5.35% to 9.94%. Similarly, for XY, the T1 treatment yielded significantly lower daily grain outputs compared to the other treatments, with discrepancies ranging from 6.26% to 10.81% during the late season of 2019. Therefore, this study suggests that conventional tillage combined with deep fertilizer application can be considered as an effective agricultural strategy to reduce nitrogen leaching and enhance fragrant rice yields.

Soil management effects on soil organic matter properties and carbon sequestration (SOMPACS)

SOMPACS is a project recommended by EJP SOIL for funding under the 1st External Call "Towards Healthy, Resilient and Sustainable Agricultural Soils". The goal of this project is to assess management practices that enrich organic matter pools that are resilient to rapid microbial decomposition. The project started in 2022 as a consortium of 12 research institutions from Poland, Germany, Ireland, Lithuania, UK, Italy and USA for a period of three years. Soil and vegetation samples from eight long-term experiments that differ in soil management practices (i.e., conventional vs. no-tillage; mineral vs. organic fertilization; with and without catch crop; and arable land vs. undisturbed grassland) are investigated. Study sites include: 22- and 54-year long experiments in Lithuania; 26-year long experiment in Italy; 30- and 40-year long experiments in Ireland; 30- and 46- and 100-year long experiments in Poland; and 178-year long Broadbalk experiment in Great Britain. Additional experimentation includes assessing the impact of root growth promoting amendments (commercially available humic substances, biochar and biogas digestate) on stable organic matter pools. In parallel with soil sampling, plant productivity are measured in all field experiments. This investigation is couples fields studies with small-scale experimental plots and laboratory incubations under controlled conditions. In addition to assessing basic soil properties, the following state-of-the-art analyses are conducted: SOM composition and stability by Py-GC-MS; fractionation of aggregate size classes and C pools of increasing physicochemical protection; isotopic analysis of δ13C and δ15N performed on different SOM pools; microbiological properties (community-level physiological profiling, selected functional genes involved in C and N cycles, microbiome and mycobiome analyses by next-generation sequencing, genetic diversity using terminal restriction fragment length polymorphism); enzymatic activity; soil water retention and soil water repellency; mineral composition of clay fraction; (8) soil structure stability. SOM composition and stability by Py-GC-MS; fractionation of aggregate size classes and C pools of increasing physicochemical protection; isotopic analysis of δ13C and δ15N performed on different SOM pools; microbiological properties (community-level physiological profiling, selected functional genes involved in C and N cycles, microbiome and mycobiome analyses by next-generation sequencing, genetic diversity using terminal restriction fragment length polymorphism); enzymatic activity; soil water retention and soil water repellency; mineral composition of clay fraction; (8) soil structure stability. The most resistant SOM pool (humin) are isolated by different methods (isolation vs. extraction) and examined for chemical composition and structure, using spectrometric and spectroscopic techniques (mass spectrometry, NMR, FTIR, EPR, UV-Vis-NIR, fluorescence). The carbon stocks in the soil profile will be evaluated and the carbon extractable in cold water will be determined to assess the potential carbon leaching and microbial availability. Additionally, in-field soil carbon dioxide (CO2) fluxes from selected experiments is monitored. Thus far, soil samples (0-100 cm depth) were collected and the humin fraction from surface A horizon was isolated for spectroscopic studies. Crop yield and vegetation productivity was also assessed. The research was financed by NCBR (EJPSOIL/I/78/SOMPACS/2022).

An efficient catalytic reduction of nitroarenes over metal‐organic framework‐derived magnetic graphitic carbon nitride nanosheet

Metal–organic frameworks (MOFs) have emerged as highly viable and environmentally friendly alternatives to traditional catalysts within the catalytic family. This project delves into the investigation and subsequent reporting of the remarkable catalytic performance exhibited by magnetic Ox‐CN‐Cu‐MOF in the reduction of nitroarenes. The synthesis of magnetic Ox‐CN‐Cu‐MOF was achieved through a streamlined and intricate process, with its structure meticulously identified via various analytical methods including high‐resolution transmision electron microscopy (HRTEM), X‐ray diffraction (XRD), scanning electron microscopy/energy dispersive X‐ray spectroscopy (SEM/EDS), Fourier transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), vibrating‐sample magnetometry (VSM) and thermogravimetric (TG) analysis. Of particular significance, the loading of copper (Cu) and its potential leaching were effectively detected through inductively coupled plasma optical emission spectroscopy (ICP‐OES) analysis. The catalytic efficacy of magnetic Ox‐CN‐Cu‐MOF was evaluated during the conversion of nitro compounds o related‐amines utilizing NaBH4 as the reductant. Remarkably, the unique structure and Lewis acidic properties of copper in the metal nodes contributed to the exceptional catalytic behavior exhibited by the magnetic Ox‐CN‐Cu‐MOF catalyst, surpassing that of previously reported catalysts. Furthermore, magnetic Ox‐CN‐Cu‐MOF demonstrated exceptional recyclability, as validated through repetitive continuous usage.

Green method for recovery of cannabinoids from Cannabis sativa flowers: pH-controlled aqueous leaching

Cannabis sativa is a remarkable plant containing a wide variety of valuable secondary metabolites, especially cannabinoids, which are valued for their clinical relevance. In this investigation, an efficient and environmentally friendly method to recover cannabinoids from cannabis plant tissues using organic solvent-free pH-controlled solution has been developed. The impact of leaching pH and solid/liquid ratios on the recovery of thirteen acidic and neutral cannabinoids from a wide range of cannabis plant tissues, which are either high tetrahydrocannabinol (THC) or high cannabidiol (CBD) cultivars in fresh, dried and decarboxylated forms, was investigated. The results revealed acidic cannabinoids, the predominant cannabinoids in fresh and cannabis dried at low temperature, were recovered efficiently at pH ≥ 12, demonstrating the potential of alkaline leaching to replace the conventional alcohol leaching widely utilized in the cannabis industry. Alkaline leaching also enables a highly efficient means of obtaining a cannabinoid concentrate directly from fresh material and avoids the long (4–6 d) and energy-intensive drying process. Alkaline leaching was also viable for neutral cannabinoid recovery from decarboxylated cannabis at low solid/liquid ratio. Finally, the stability of cannabinoids in leached solutions at room temperature and in the dark was tracked and analyzed for up to 15 d. These data offer the cannabis industry a range of options for cannabinoid storage and extraction during the enrichment processes.

Fate of herbicides in cropped lysimeters: 1. Influence of different processes and model structure on vadose zone flow

AbstractUnderstanding transport and fate processes in the subsurface is of fundamental importance to identify the leaching potentials of herbicides or other compounds to groundwater resources. HYDRUS‐1D was used to simulate water flow and solute transport in arable land lysimeters. Simulations were compared to observed drainage rates and stable water isotopes (δ18O) in the drainage. Four different model setups were investigated and statistically evaluated for their model performance to identify dominant processes for water flow characterization in the vadose zone under similar cultivation management and climatic conditions. The studied lysimeters contain soil cores dominated by sandy gravel (Ly1) and clayey sandy silt (Ly2), both cropped with maize located in Wielenbach, Germany. First, a single‐porosity setup was chosen. For Ly1, modeling results were satisfactory, but for Ly2, the damping observed in the isotope signature of the drainage could not be fully covered. By considering immobile water with a dual‐porosity setup for Ly2, model performance improved. This could be due to a higher fraction of fine pores in Ly2 available for water storage, leading to mixing processes of isotopically enriched summer precipitation and lighter winter water. Accounting for isotopic evaporation fractionation processes in both model setups did not lead to improved model performance. Consequentially, the difference in soil hydraulic properties between the two lysimeters seems to impact water flow processes. Knowledge of such differences is crucial to prevent contamination and mitigate potential risks to soil and groundwater.