Potent HIV-1 Protease Inhibitors Research Articles

Design and Synthesis of Highly Potent HIV-1 Protease Inhibitors Containing Tricyclic Fused Ring Systems as Novel P2 Ligands: Structure-Activity Studies, Biological and X-ray Structural Analysis.

The design, synthesis, and biological evaluation of a new class of HIV-1 protease inhibitors containing stereochemically defined fused tricyclic polyethers as the P2 ligands and a variety of sulfonamide derivatives as the P2' ligands are described. A number of ring sizes and various substituent effects were investigated to enhance the ligand-backbone interactions in the protease active site. Inhibitors 5c and 5d containing this unprecedented fused 6-5-5 ring system as the P2 ligand, an aminobenzothiazole as the P2' ligand, and a difluorophenylmethyl as the P1 ligand exhibited exceptional enzyme inhibitory potency and maintained excellent antiviral activity against a panel of highly multidrug-resistant HIV-1 variants. The umbrella-like P2 ligand for these inhibitors has been synthesized efficiently in an optically active form using a Pauson-Khand cyclization reaction as the key step. The racemic alcohols were resolved efficiently using a lipase catalyzed enzymatic resolution. Two high resolution X-ray structures of inhibitor-bound HIV-1 protease revealed extensive interactions with the backbone atoms of HIV-1 protease and provided molecular insight into the binding properties of these new inhibitors.

Design of Highly Potent, Dual-Acting and Central-Nervous-System-Penetrating HIV-1 Protease Inhibitors with Excellent Potency against Multidrug-Resistant HIV-1 Variants.

Herein we report the design, synthesis, X-ray structural, and biological studies of an exceptionally potent HIV-1 protease inhibitor, compound 5 ((3S,7aS,8S)-hexahydro-4H-3,5-methanofuro[2,3-b]pyran-8-yl ((2S,3R)-4-((2-(cyclopropylamino)-N-isobutylbenzo[d]thiazole)-6-sulfonamido)-1-(3,5-difluorophenyl)-3-hydroxybutan-2-yl)carbamate). Using structure-based design, we incorporated an unprecedented 6-5-5-ring-fused crown-like tetrahydropyranofuran as the P2-ligand, a cyclopropylaminobenzothiazole as the P2'-ligand, and a 3,5-difluorophenylmethyl group as the P1-ligand. The resulting inhibitor 5 exhibited exceptional HIV-1 protease inhibitory and antiviral potency at the picomolar level. Furthermore, it displayed antiviral IC50 values in the picomolar range against a wide panel of highly multidrug-resistant HIV-1 variants. The inhibitor shows an extremely high genetic barrier against the emergence of drug-resistant variants. It also showed extremely potent inhibitory activity toward dimerization as well as favorable central nervous system penetration. We determined a high-resolution X-ray crystal structure of the complex between inhibitor 5 and HIV-1 protease, which provides molecular insight into the unprecedented activity profiles observed.

Design and Synthesis of Piperazine Sulfonamide Cores Leading to Highly Potent HIV-1 Protease Inhibitors.

Using the HIV-1 protease binding mode of MK-8718 and PL-100 as inspiration, a novel aspartate binding bicyclic piperazine sulfonamide core was designed and synthesized. The resulting HIV-1 protease inhibitor containing this core showed an 60-fold increase in enzyme binding affinity and a 10-fold increase in antiviral activity relative to MK-8718.

An enantioselective enzymatic desymmetrization route to hexahydro-4H-furopyranol, a high-affinity ligand for HIV-1 protease inhibitors

An enantioselective synthesis of (3aS,4S,7aR)-hexahydro-4H-furo[2,3-b]pyran-4-ol, a high-affinity nonpeptide ligand for a variety of potent HIV-1 protease inhibitors is described. The key steps involved a highly enantioselective enzymatic desymmetrization of meso-diacetate, an efficient transacetalization, and a highly diastereoselective reduction of a ketone. This route is amenable to large-scale synthesis using readily available starting materials.

2D-QSAR study of fullerene nanostructure derivatives as potent HIV-1 protease inhibitors

The protease of human immunodeficiency virus1 (HIV-PR) is an essential enzyme for antiviral treatments. Carbon nanostructures of fullerene derivatives, have nanoscale dimension with a diameter comparable to the diameter of the active site of HIV-PR which would in turn inhibit HIV. In this research, two dimensional quantitative structure-activity relationships (2D-QSAR) of fullerene derivatives against HIV-PR activity were employed as a powerful tool for elucidation the relationships between structure and experimental observations. QSAR study of 49 fullerene derivatives was performed by employing stepwise-MLR, GAPLS-MLR, and PCA-MLR models for variable (descriptor) selection and model construction. QSAR models were obtained with higher ability to predict the activity of the fullerene derivatives against HIV-PR by a correlation coefficient (R2training) of 0.942, 0.89, and 0.87 as well as R2test values of 0.791, 0.67and 0.674 for stepwise-MLR, GAPLS-MLR, and PCA -MLR models, respectively. Leave-one-out cross-validated correlation coefficient (R2CV) and Y-randomization methods confirmed the models robustness. The descriptors indicated that the HIV-PR inhibition depends on the van der Waals volumes, polarizability, bond order between two atoms and electronegativities of fullerenes derivatives. 2D-QSAR simulation without needing receptor's active site geometry, resulted in useful descriptors mainly denoting “C60 backbone-functional groups” and “C60 functional groups” properties. Both properties in fullerene refer to the ligand fitness and improvement van der Waals interactions with HIV-PR active site. Therefore, the QSAR models can be used in the search for novel HIV-PR inhibitors based on fullerene derivatives.

Design and synthesis of potent HIV-1 protease inhibitors with (S)-tetrahydrofuran-tertiary amine-acetamide as P2−ligand: Structure−activity studies and biological evaluation

The design, synthesis, and SAR study of a new series of HIV-1 protease inhibitors incorporating stereochemically defined tetrahydrofuran-tertiary amine-acetamide P2-ligand are described. Various substituent effects on the tertiary amine P2-ligand and phenylsulfonamide P2′-ligand were investigated to maximize the ligand-binding site interactions in the protease active site. Most of inhibitors displayed low nanomolar to subnanomolar inhibitory potency. Inhibitor 20e containing N-(S-tetrahydrofuran)-N-(2-methoxyethyl)acetamide as P2-ligand along with 4-methoxylphenylsulfonamide as P2′-ligand displayed the most potent enzyme inhibitory activity (IC50 = 0.35 nM) and remarkably low cytotoxicity (CC50 = 305 μM).

Design and Development of Highly Potent HIV-1 Protease Inhibitors with a Crown-Like Oxotricyclic Core as the P2-Ligand To Combat Multidrug-Resistant HIV Variants.

Design, synthesis, and evaluation of a new class of exceptionally potent HIV-1 protease inhibitors are reported. Inhibitor 5 displayed superior antiviral activity and drug-resistance profiles. In fact, this inhibitor showed several orders of magnitude improved antiviral activity over the FDA approved drug darunavir. This inhibitor incorporates an unprecedented 6-5-5 ring-fused crown-like tetrahydropyranofuran as the P2 ligand and an aminobenzothiazole as the P2' ligand with the (R)-hydroxyethylsulfonamide isostere. The crown-like P2 ligand for this inhibitor has been synthesized efficiently in an optically active form using a chiral Diels-Alder catalyst providing a key intermediate in high enantiomeric purity. Two high resolution X-ray structures of inhibitor-bound HIV-1 protease revealed extensive interactions with the backbone atoms of HIV-1 protease and provided molecular insight into the binding properties of these new inhibitors.

The Second-Generation Maturation Inhibitor GSK3532795 Maintains Potent Activity Toward HIV Protease Inhibitor-Resistant Clinical Isolates.

Protease inhibitor (PI)-resistant HIV-1 isolates with primary substitutions in protease (PR) and secondary substitutions in Gag could potentially exhibit cross-resistance to maturation inhibitors. We evaluated the second-generation maturation inhibitor, GSK3532795, for activity toward clinical isolates with genotypic and phenotypic characteristics associated with PI resistance (longitudinal). Longitudinal clinical isolates from 15 PI-treated patients and 7 highly PI-resistant (nonlongitudinal) viruses containing major and minor PI resistance-associated mutations were evaluated for GSK3532795 sensitivity. Phenotypic sensitivity was determined using the PhenoSense Gag/PR assay (Monogram Biosciences) or in-house single- and multiple-cycle assays. Changes from baseline [CFB; ratio of post- to pre-treatment FC-IC50 (fold-change in IC50 versus wild-type virus)] <3 were considered to be within the no-effect level. All nonlongitudinal viruses tested were sensitive to GSK3532795 (FC-IC50 range 0.16-0.68). Among longitudinal isolates, all post-PI treatment samples had major PI resistance-associated mutations in PR and 17/21 had PI resistance-associated changes in Gag. Nineteen of the 21 post-PI treatment samples had GSK3532795 CFB <3. Median (range) CFB was 0.83 (0.05-27.4) [Monogram (11 patients)] and 1.5 (1.0-2.2) [single-cycle (4 patients)]. The 2 post-PI treatment samples showing GSK3532795 CFB >3 (Monogram) were retested using single- and multiple-cycle assays. Neither sample had meaningful sensitivity changes in the multiple-cycle assay. Gag changes were not associated with an increased GSK3532795 CFB. GSK3532795 maintained antiviral activity against PI-resistant isolates with emergent PR and/or Gag mutations. This finding supports continued development of GSK3532795 in treatment-experienced patients with or without previous PI therapy.

Probing Lipophilic Adamantyl Group as the P1-Ligand for HIV-1 Protease Inhibitors: Design, Synthesis, Protein X-ray Structural Studies, and Biological Evaluation.

A series of potent HIV-1 protease inhibitors with a lipophilic adamantyl P1 ligand have been designed, synthesized, and evaluated. We have developed an enantioselective synthesis of adamantane-derived hydroxyethylamine isosteres utilizing Sharpless asymmetric epoxidation as the key step. Various inhibitors incorporating P1-adamantylmethyl in combination with P2 ligands such as 3-(R)-THF, 3-(S)-THF, bis-THF, and THF-THP were examined. The S1' pocket was also probed with phenyl and phenylmethyl ligands. Inhibitor 15d, with an isobutyl P1' ligand and a bis-THF P2 ligand, proved to be the most potent of the series. The cLogP value of inhibitor 15d is improved compared to inhibitor 2 with a phenylmethyl P1-ligand. X-ray structural studies of 15d, 15h, and 15i with HIV-1 protease complexes revealed molecular insight into the inhibitor-protein interaction.

Simplified molecular input line entry system-based descriptors in QSAR modeling for HIV-protease inhibitors

Simplified molecular input line entry system (SMILES) descriptor based quantitative structure–activity relationship (QSAR) study was performed on a set of HIV-protease inhibitors to explore the structural functionalities for inhibition of the HIV-protease. For this purpose a set of HIV-inhibitors was collected from the literature along with their inhibitory constants. Monte Carlo optimization-based CORAL software was used for QSAR model development. Firstly, the dataset was divided into three random splits and secondly each split was divided into training, calibration, test and validation sets. A training set was used for model development whereas the rest of the sets were used to assess the quality of the developed models. QSAR models were developed with and without considering the influence of cyclic rings toward the inhibitory activity. Statistical quality of QSAR models developed from all splits was very good and fulfilled the criteria. The values of R2, Q2, s, R2pred and r2m explained that selected models are robust in nature and efficient enough to predict the inhibitory activity of the molecules outside of the training set. Statistical parameters also suggested that the presence of cyclic rings have a crucial impact on inhibitory activity. The molecular fragments were found to be important for the increase or decrease of the inhibitory activity which explained that models have mechanistic interpretation. This ligand-based QSAR study can provide clear directions to design and modulate potential HIV-protease inhibitors.

Expedient screening for HIV-1 protease inhibitors using a simplified immunochromatographic assay.

A colloidal gold-based immunochromatographic (IC) strip test was developed and validated for the detection of HIV-1 protease (HIV-PR) activity and inhibitory effect of HIV-PR inhibitors (PIs). It is a unique 'two-step' process requiring the combination of proteolysis of HIV-PR and an immunochromatographic reaction. Monoclonal antibodies to the free C-terminus of HIV matrix protein (HIV-MA) conjugated to gold particles and a monoclonal antibody against intact and cleaved forms of the HIV-MA are immobilized on the 'Test'-line of the IC strip. Using lopinavir, a potent HIV protease inhibitor, the IC-strip was optimized to detect inhibitory activity against HIV-protease. At a lopinavir concentration of 1000ng/mL (its suggested minimum effective concentration), a HIV-PRH6 concentration of 6mg/mL and incubation period of 60min were the optimal conditions. A preliminary comparison between a validated high-performance liquid chromatography assay and the IC-strip to semi-quantify HIV protease inhibitor concentrations (lopinavir and atazanavir) demonstrated good agreement. This simplified method is suitable for the rapid screening of novel protease inhibitors for future therapeutic use. Moreover, the IC strip could also be optimized to semi-quantify PIs concentrations in plasma samples.

New 1(2H)-phthalazinone derivatives as potent nonpeptidic HIV-1 protease inhibitors: molecular docking studies, molecular dynamics simulation, oral bioavailability and ADME prediction

Molecular docking simulations of compounds 1–7, the newly synthesised 1(2H)-phthalazinone derivatives with N-(dimethylamino)ethyl pendant arm, as potent inhibitors of HIV-1 protease (HIV-1 PR) were performed. The results of calculations show that compounds 1–7 can form stable complexes with HIV-1 PR and their inhibitory action is mainly based on combination of intermolecular hydrogen bonds and ionic interactions between flexible cationic ammonium moiety of ligands and deprotonated carboxylic residues Asp25 and Asp29 of the target receptor. Molecular dynamics calculation in explicit water environment of the best ranked complex of compound 3 with HIV-1 PR reveals its high stability with conservation of strong salt bridge interactions during all simulation time. Per-residue decomposition of the binding free energy of HIV-1 PR complex with compound 3 calculated with the MM-PBSA method shows electrostatic and van der Waals interactions as the main favourable components. Estimated oral bioavailability and calculated absorption, distribution, metabolism and excretion (ADME) descriptors, namely, intestinal absorption, aqueous solubility and blood–brain barrier penetration, for compounds 1–7 indicate their good pharmacokinetic profile in humans after oral administration. Enthalpically favourable contribution of ligand–receptor salt bridge interactions and hydrogen bonds to binding free energy in calculated complexes of compounds 1–7 with HIV-1 PR also suggests a potent feature to combat a drug resistance to HIV-1 PR inhibitors.

Design of HIV-1 Protease Inhibitors with Amino-bis-tetrahydrofuran Derivatives as P2-Ligands to Enhance Backbone-Binding Interactions: Synthesis, Biological Evaluation, and Protein-Ligand X-ray Studies.

Structure-based design, synthesis, and biological evaluation of a series of very potent HIV-1 protease inhibitors are described. In an effort to improve backbone ligand-binding site interactions, we have incorporated basic-amines at the C4 position of the bis-tetrahydrofuran (bis-THF) ring. We speculated that these substituents would make hydrogen bonding interactions in the flap region of HIV-1 protease. Synthesis of these inhibitors was performed diastereoselectively. A number of inhibitors displayed very potent enzyme inhibitory and antiviral activity. Inhibitors 25f, 25i, and 25j were evaluated against a number of highly-PI-resistant HIV-1 strains, and they exhibited improved antiviral activity over darunavir. Two high resolution X-ray structures of 25f- and 25g-bound HIV-1 protease revealed unique hydrogen bonding interactions with the backbone carbonyl group of Gly48 as well as with the backbone NH of Gly48 in the flap region of the enzyme active site. These ligand-binding site interactions are possibly responsible for their potent activity.

Fragment-Based QSAR and Structural Analysis of a Series of Hydroxyethylamine Derivatives as HIV-1 Protease Inhibitors.

HIV-1 protease is a key enzyme for viral maturation because it cleaves precursor polypeptides into mature structural and functional proteins. The introduction of protease inhibitors into therapy in the mid-1990s has dramatically changed the AIDS panorama worldwide. However, resistance to currently available protease inhibitors remains a serious challenge that must be overcome. Herein, we report a fragment-based QSAR study of a series of highly potent HIV-1 protease inhibitors, as well as the structural basis of their binding affinity. Hologram QSAR (HQSAR) analyses were performed, resulting in robust statistical models that consistently correlated the bioactivity profile with the two dimensional molecular descriptors. The robustness of the best model was assessed based on the correlation coefficients (q(2) = 0.70 and r(2) = 0.90), as well as the prediction of the activity of an external test set (r(2) pred = 0.75). Structure-based molecular modeling studies were performed to investigate the binding mode of the best inhibitor in the active site of the enzyme. The HQSAR model and the structural findings provide valuable insights for the rational design of structurally related HIV-1 protease inhibitors.

Structure-based design of potent HIV-1 protease inhibitors with modified P1-biphenyl ligands: synthesis, biological evaluation, and enzyme-inhibitor X-ray structural studies.

We report the design, synthesis, X-ray structural studies, and biological evaluation of a novel series of HIV-1 protease inhibitors. We designed a variety of functionalized biphenyl derivatives to make enhanced van der Waals interactions in the S1 subsite of HIV-1 protease. These biphenyl derivatives were conveniently synthesized using a Suzuki-Miyaura cross-coupling reaction as the key step. We examined the potential of these functionalized biphenyl-derived P1 ligands in combination with 3-(S)-tetrahydrofuranyl urethane and bis-tetrahydrofuranyl urethane as the P2 ligands. Inhibitor 21e, with a 2-methoxy-1,1'-biphenyl derivative as P1 ligand and bis-THF as the P2 ligand, displayed the most potent enzyme inhibitory and antiviral activity. This inhibitor also exhibited potent activity against a panel of multidrug-resistant HIV-1 variants. A high resolution X-ray crystal structure of related Boc-derivative 17a-bound HIV-1 protease provided important molecular insight into the ligand-binding site interactions of the biphenyl core in the S1 subsite of HIV-1 protease.

Effects of drug-resistant mutations on the dynamic properties of HIV-1 protease and inhibition by Amprenavir and Darunavir.

Molecular dynamics simulations are performed to investigate the dynamic properties of wild-type HIV-1 protease and its two multi-drug-resistant variants (Flap + (L10I/G48V/I54V/V82A) and Act (V82T/I84V)) as well as their binding with APV and DRV inhibitors. The hydrophobic interactions between flap and 80 s (80’s) loop residues (mainly I50-I84’ and I50’-I84) play an important role in maintaining the closed conformation of HIV-1 protease. The double mutation in Act variant weakens the hydrophobic interactions, leading to the transition from closed to semi-open conformation of apo Act. APV or DRV binds with HIV-1 protease via both hydrophobic and hydrogen bonding interactions. The hydrophobic interactions from the inhibitor is aimed to the residues of I50 (I50’), I84 (I84’), and V82 (V82’) which create hydrophobic core clusters to further stabilize the closed conformation of flaps, and the hydrogen bonding interactions are mainly focused with the active site of HIV-1 protease. The combined change in the two kinds of protease-inhibitor interactions is correlated with the observed resistance mutations. The present study sheds light on the microscopic mechanism underlying the mutation effects on the dynamics of HIV-1 protease and the inhibition by APV and DRV, providing useful information to the design of more potent and effective HIV-1 protease inhibitors.

Design, synthesis, biological evaluation and X-ray structural studies of HIV-1 protease inhibitors containing substituted fused-tetrahydropyranyl tetrahydrofuran as P2-ligands.

Design, synthesis, biological and X-ray crystallographic studies of a series of potent HIV-1 protease inhibitors are described. Various polar functionalities have been incorporated on the tetrahydropyranyl-tetrahydrofuran-derived P2 ligand to interact with the backbone atoms in the S2-subsite. The majority of the inhibitors showed very potent enzyme inhibitory and antiviral activity. Two high-resolution X-ray structures of 30b- and 30j-bound HIV-1 protease provide insight into ligand-binding site interactions. In particular, the polar functionalities on the P2-ligand appear to form unique hydrogen bonds with Gly48 amide NH and amide carbonyl groups in the flap region.

Synthesis of novel p-tert-butylcalix[4]arene Schiff bases and their complexes with C60, potential HIV-Protease inhibitors

Some p-tert-butylcalix[4]arene Schiff base crown ethers were synthesized, characterized using 1H, 13C-NMR, DEPT 135 and Mass spectrometry. Their complexes with C60 were isolated and characterized. The inhibition effect of these complexes on HIVP was studied and found that complexes of 9 and 10 have comparable Ki values to Pepstatine which is known as HIVP inhibitor and used as a control. The synthesis of the ligands, complexes and the inhibition behavior are discussed in this article.

Development of hydrogels by radiation induced polymerization for use in slow drug delivery

In the present work, in order to improve the drug release profile of indinavir sulfate, a potent inhibitor of HIV protease, controlled drug delivery systems in the form of hydrogels have been designed by a radiation graft polymerization method. These hydrogels have been prepared by using dietary fiber psyllium and binary monomers mixture of acrylamide (AAm) and 2-acrylamido-2-methylpropanesulfonic acid (AMPSA). These polymers have been characterized with cryo-SEMs, FTIR, XRD and swelling studies. The swelling of hydrogels has been determined in solution of different pH, temperature and [NaCl]. in vitro release studies of model drug indinavir sulfate in different pH have been carried out to determine the drug release mechanism. The release of dug occurred through non-Fickian mechanism.

Design and synthesis of highly potent HIV-1 protease inhibitors with novel isosorbide-derived P2 ligands

The design, synthesis, and biological evaluation of a series of six HIV-1 protease inhibitors incorporating isosorbide moiety as novel P2 ligands are described. All the compounds are very potent HIV-1 protease inhibitors with IC50 values in the nanomolar or picomolar ranges (0.05–0.43nM). Molecular docking studies revealed the formation of an extensive hydrogen-bonding network between the inhibitor and the active site. Particularly, the isosorbide-derived P2 ligand is involved in strong hydrogen bonding interactions with the backbone atoms.