Potency Of Influenza Vaccines Research Articles

Analysing the Potency of a Seasonal Influenza Vaccine Using Reference Antisera from Heterologous Strains.

The potency of inactivated seasonal influenza vaccine is harmonised by establishing the haemagglutinin (HA) content using the compendial single radial diffusion (SRD) method. SRD reagents (antigens and antisera) are prepared, calibrated and distributed by regulatory agencies as standards for potency testing, following the biannual World Health Organization (WHO) announcements of the virus strains suitable for inclusion in the vaccine. The generation of a homologous hyperimmune sheep antiserum constrains the time to vaccine release. This study tests the application of heterologous antisera to determine the potency of influenza vaccine compared to that of a standard homologous antiserum. The results indicate that the selected heterologous sheep antisera directed to seasonal H1N1, H3N2 or B Victoria virus strains can be used to determine the accurate potency of inactivated seasonal influenza vaccines. Individually selected antisera could be useful for two to fourteen seasons. A limitation to the heterologous antiserum approach is the diversity of each individual serum, indicating that the empirical determination of a specific serum is required. This application has the potential to enable the earlier availability of a seasonal vaccine and reduce animal usage.

Influenza virus evolution and vaccine development

Although the effectiveness of universal influenza vaccines may vary from year to year, getting vaccinated against the influenza virus remains the optimal strategy for preventing influenza virus infection. As a result, recent research has focused on improving the protective efficacy and potency of influenza vaccines. This paper explores two theories: antigenic drift and antigenic imprinting. Antigenic drift refers to the gradual changes and evolution of antigens within influenza viruses. However, epidemiological data suggest that a single strain dominates each flu season. The theory of antigenic imprinting helps explain this phenomenon. Population immunity targets epitopes of limited variables (ELVs). Influenza vaccines can target ELVs to enhance vaccine effectiveness specifically.

Rapid determination of influenza vaccine potency by an SPR-based method using subtype or lineage-specific monoclonal antibodies.

Potency testing and release of annual influenza vaccines require preparation, calibration, and distribution of reference antigens (RAs) and antisera every year, which takes an average of 8 to 12 weeks, and can be a major limiting factor in pandemic situations. Here we describe for the first time a robust Surface Plasmon Resonance (SPR)-based method that employs influenza subtype or lineage hemagglutinin (HA) specific monoclonal antibodies (mAbs) to measure the HA concentration in influenza multivalent vaccines. Implementing such an advanced test method will at the very least eliminate the rate-limiting and laborious efforts of making antisera reagents annually, and thus expedite the influenza vaccine delivery to the public by at least 6 weeks. Results demonstrate that the SPR-based method, developed using Biacore, is robust and not influenced by the type of RAs (inactivated whole virus, split, or subunit vaccine-derived materials), whether they are used as monovalent or multivalent preparations. HA concentrations obtained for monovalent drug substances (DS) or quadrivalent drug products (DP) of inactivated influenza split vaccine showed a tight correlation (the best fit value for the slope is 1.001 with R2 of 0.9815 and P-value <0.0001) with the corresponding values obtained by the current potency assay, Single Radial Immunodiffusion (SRID). Supplementary analysis of the results by the Bland-Altman plot demonstrated good agreement between the SPR and SRID methods, with no consistent bias of the SPR versus SRID method. We further demonstrate that the SPR-based method can be used to estimate HA concentrations in intermediates of the influenza vaccine manufacturing process containing varying matrices and impurity levels. Further, the results demonstrate that the method is sensitive to detecting degradation of HA caused by elevated temperature, low pH, and freezing. It is evident from this report and other published work that the advancement of analytical techniques and the early findings are encouraging for the implementation of alternate potency assays with far-reaching benefits covering both seasonal and pandemic influenza.

The differential effect of sub-micron level HA aggregates on influenza potency assays

Influenza vaccines remain the most effective public health measure for the prevention of influenza-related illnesses. The primary immunogen in inactivated influenza vaccines is hemagglutinin (HA), the receptor binding protein of influenza. The concentration of HA during vaccine production and testing is standardized according to the level of antigen as measured by Single Radial Immunodiffusion Assay (SRID). This allows vaccine potency to be controlled such that individuals receive a dose known to provoke a clinically protective immune response. As compared to alternatives, SRID has the advantage of quantifying immunologically relevant forms of HA, but it depends on timely generation of novel reagents for each new vaccine strain. In recent years, a number of alternative assays have been suggested based on either epitope recognition, receptor binding or protection from proteolysis but it is unclear how they relate to vaccine potency in clinical trials. In this report we describe the development of a lectin-based, ELISA-type assay for HA potency and find it provides similar potency estimates to SRID except in the case of a vaccine with aggregated HA and other viral proteins. In that case, SRID predicted the immunologically active HA present and ELISA techniques did not. This difference was due to tested antibodies failing to pull down or bind to the HA present unless particle aggregates were first dissociated. Furthermore, detergent treatment alone was insufficient to complete this dissociation. While others have previously demonstrated that immunocapture-based techniques can misestimate the potency of influenza vaccines depending on the individual antibodies used we demonstrate that in this case the failure was due to an inability of all antibodies to capture HA contained in the aggregated influenza vaccine.

Selective Capture and Determination of Receptor-Binding Hemagglutinin in Influenza Vaccine Preparations Using a Coupled Receptor-Binding/RP-HPLC Assay.

Influenza vaccine potency is determined by the quantification of immunologically active hemagglutinin capable of eliciting neutralizing antibodies upon immunization. Currently, the single radial immunodiffusion (SRID) method is the standard in vitro potency assay used for lot release of seasonal inactivated influenza vaccines. Despite the proven usage of SRID, significant limitations such as the time-consuming preparation of reagents and limited dynamic range warrant the need for the development of alternative potency assays. Such alternative approaches need to discriminate and quantify relevant hemagglutinin material, provide strain identity, and be independent of strain-specific and seasonal reagents. Herein, we present a proof of concept method that combines the capture of conformationally well-folded hemagglutinin via a sialic acid binding step with the resolving power of reversed-phase high-performance liquid chromatography for strain identity and determination. Details of the protocol for the selective capture of receptor-binding hemagglutinin, its release from the receptor, and its relative determination are presented. This approach was found to provide flexibility for the reagents to be used and was adaptable to varying strain compositions of influenza vaccines. This proof of concept approach was developed as an antibody-independent methodology.

SPRi-based hemagglutinin quantitative assay for influenza vaccine production monitoring

Influenza vaccine manufacturers lack tools, whatever the involved production bioprocess (egg or cell-based), to precisely and accurately evaluate vaccine antigen content from samples. Indeed, the gold standard single-radial immunodiffusion (SRID) assay, which remains the only validated assay for the evaluation of influenza vaccine potency, is criticized by the scientific community and regulatory agencies since a decade for its high variability, lack of flexibility and low sensitivity. We hereby report an imaging surface plasmon resonance (SPRi) assay for the quantification of both inactivated vaccine influenza antigens and viral particles derived from egg- and cell-based production samples, respectively. The assay, based on fetuin-hemagglutinin interactions, presents higher reproducibility (<3%) and a greater analytical range (0.03–20 µg/mL) than SRID for bulk monovalent and trivalent vaccine and its limit of detection was evaluated to be 100 times lower than the SRID’s one. Finally, viral particles production through cell culture-based bioprocess was also successfully monitored using our SPRi-based assay and a clear correlation was found between the biosensor response and total virus particle content.

Gene expression profiling toward the next generation safety control of influenza vaccines and adjuvants in Japan

Influenza becomes epidemic worldwide every year, and many individuals receive vaccination annually. Quality control relating to safety and potency of influenza vaccines is important to maintain public confidence. The safety of influenza vaccines has been assessed by clinical trials, and animal safety tests are performed to monitor the consistent quality between vaccines used for clinical trials and marketing; the biological responses in vaccinated animals are evaluated, including changes in body weight and white blood cell count. Animal safety tests have been contributing to the quality relating to the safety of influenza vaccines for decades, but improvements are needed. Although precise mechanisms involving biological changes in animal safety tests have not been fully elucidated, the application of cDNA microarray technology make it possible to reliably identify genes related to biological responses in vaccinated animals. From analysis of the expression profile of >10,000 genes of lung in animals treated with an inactivated whole virion influenza vaccine, we identified 17 marker genes whose expression patterns correlated well to changes in body weight and leukocyte count in vaccinated animals. In influenza HA vaccine-treated animals exhibiting subtle changes in biological responses, a robust expression pattern of marker genes was found. Furthermore, these marker genes could also be used in the evaluation of adjuvanted influenza vaccines. The expression profile of marker genes is expected to be an alternative indicator for safety control of various influenza vaccines conferring high sensitivity and short turnaround time. Thus, gene expression profiling may be a powerful tool for safety control of vaccines in the future.

VaxArray for hemagglutinin and neuraminidase potency testing of influenza vaccines

Practical methods to measure the potency of influenza vaccines are needed as alternatives for the standard single radial immunodiffusion (SRID) assay. VaxArray assays for influenza hemagglutinin (HA) and neuraminidase (NA) have been developed to address this need. In this report, we evaluate the use of these assays to assess the potency of HA and NA of an A/H3N2 subunit vaccine by determining the correlation between the amounts measured by VaxArray and the immunogenicity in mice. The antibody response after one and two doses of five formulations of the vaccine ranging from 5 µg/mL to 80 µg/mL of HA, was measured by hemagglutination inhibition (HAI) and neuraminidase inhibition (NAI) assays. For hemagglutinin, vaccine potency determined by VaxArray was equivalent to potency measured SRID and these amounts were predictive of immunogenicity, with excellent correlation between potency measured by VaxArray and the HAI geometric mean titers (GMT). Likewise, the amount of NA measured by VaxArray was predictive of the NAI GMT. The VaxArray NA assay reported non-detectable levels of intact NA for a sample that had been heat degraded at 56 °C for 20 h, demonstrating that the assay measures the native, active form of NA. Similarly, the HA potency measured by VaxArray in this heat-treated sample was very low when a monoclonal antibody was used to detect the amount of antigen bound. Importantly, the force degraded sample induced low HAI titers and the NAI titers were not measurable, supporting the conclusion that the VaxArray HA and NA assays measure the immunogenic forms of these A/H3N2 antigens. This study indicates that VaxArray assays can be used to assess the potency of HA and NA components in influenza vaccines as a proxy for immunogenicity.

Standardisation of inactivated influenza vaccines-Learning from history.

The single radial immunodiffusion assay has been the accepted method for determining the potency of inactivated influenza vaccines since 1978. The worldwide adoption of this assay for vaccine standardisation was facilitated through collaborative studies that demonstrated a high level of reproducibility and its applicability to the different types of influenza vaccine being produced at that time. Clinical evidence indicated the relevance of SRID as a potency assay. Unique features of the SRID assay are likely responsible for its longevity even as newer technologies for vaccine characterisation have been developed and refined. Nevertheless, there are significant limitations to the SRID assay that indicate the need for improvement, and there has been a substantial amount of work undertaken in recent years to develop and evaluate alternative potency assays, including collaborative studies involving research laboratories, regulatory agencies and vaccine manufacturers. Here, we provide an overview of the history of inactivated influenza vaccine potency testing, the current state of alternative assay development and the some of the major challenges to be overcome before implementation of new assays for potency determination.

Analysis of the proficiency of single radial immunodiffusion assays for quality control of influenza vaccines in Korea

Influenza vaccine potency, which is determined by quantitatively measuring the content of Hemagglutinin (HA), is an essential index representing the efficacy of the vaccine. Standardization of the single radial immunodiffusion (SRID) assay, a method for measuring HA content, and proficiency of the testing institutions are crucial for influenza vaccine quality control. Herein, we assessed the proficiency of SRID assays at the National Control Laboratory (NCL) of Korea and several vaccine manufacturers. Eight laboratories participated in this study, and the proficiencies of all laboratories yielded satisfactory results in overall SRID assays. In contrast, there were some unsatisfactory results in measuring with different types of agarose gel plates produced by other laboratories. Overall, our findings demonstrated that the proficiency of SRID assay in the tested laboratories is acceptable for quality control of influenza vaccines and that detailed review on the validation reports regarding the test methods will be helpful for better control.

VaxArray assessment of influenza split vaccine potency and stability

Vaccine manufacturers require more rapid and accurate tools to characterize the potency and stability of their products. Currently, the gold standard for influenza vaccine potency is the single radial immunodiffusion (SRD) assay, which has inherent disadvantages. The primary objective of this study was to investigate the ability of the VaxArray Influenza (VXI) seasonal hemagglutinin (sHA) potency assay to accurately quantify potency and stability in finished vaccines as well as to quantify hemagglutinin protein (HA) within crude in-process samples. Monobulk intermediates and mono- and multivalent vaccines were tested using VXI. Quantification of HA in crude samples was evaluated by spiking known concentrations of HA into allantoic fluid. VXI generated SRD equivalent potency measurements with high accuracy (within ±10%) and precision (CV 10±4%) for antigen components of monobulk intermediates and multivalent split vaccines. For these vaccines and vaccine intermediates, the VXI linear dynamic range was ∼0.01–0.6μg/mL, which is 12× greater than the linear range of SRD. The measured sample limit of detection (LOD) for VXI varied from 0.005 to 0.01μg/mL for the different subtypes, which in general is ≥600× lower than the LOD for SRD. VXI was able to quantify HA in crude samples where HA only accounts for 0.02% of the total protein content. Stability indication was investigated by tracking measured potency as a function of time at elevated temperature by both SRD and VXI. After 20 h at 56°C, the ratio of VXI to SRD measured potency in a quadrivalent vaccine was 76%, 125%, 60%, and 98% for H1/California, H3/Switzerland, B/Phuket and B/Brisbane, respectively. Based on the study results, it is concluded that VXI is a rapid, multiplexed immunoassay that can be used to accurately determine flu vaccine potency and stability in finished product and in crude samples from upstream processes.

Evaluation of Haemagglutinin Content by RP-HPLC to Generate Pandemic Influenza Vaccine.

The potency of influenza vaccine is determined based on its hemagglutinin (HA) content. In general, single radial immunodiffusion (SRID) assay has been utilized as the standard method to measure HA content. However, preparation of reagents for SRID such as antigen and antibody takes approximately 2~3 months, which causes delays in the development of influenza vaccine. Therefore, quantification of HA content by other alternative methods is required. In this study, we measured HA contents of H1N1 antigen and H1N1 influenza vaccine by reverse phase-high performance liquid chromatography (RP-HPLC) methods. The presence of HA1 and HA2 was investigated by silver staining and Western blot assay. In addition, accuracy and repeatability of HA measurement by RP-HPLC were evaluated. Comparison of HA concentration by SRID and RP-HPLC revealed a precise correlation between the two methods. Our results suggest that RP-HPLC assay can replace SRID in the event of a pandemic flu outbreak for rapid vaccine development.

Conformationally selective biophysical assay for influenza vaccine potency determination

Influenza vaccines are the primary intervention for reducing the substantial health burden from pandemic and seasonal influenza. Hemagglutinin (HA) is the most important influenza vaccine antigen. Subunit and split influenza vaccines are formulated, released for clinical use, and tested for stability based on an in vitro potency assay, single-radial immunodiffusion (SRID), which selectively detects HA that is immunologically active (capable of eliciting neutralizing or hemagglutination inhibiting antibodies in an immunized subject). The time consuming generation of strain-specific sheep antisera and calibrated antigen standards for SRID can delay vaccine release. The limitation in generating SRID reagents was evident during the early days of the 2009 pandemic, prompting efforts to develop more practical, alternative, quantitative assays for immunologically active HA. Here we demonstrate that, under native conditions, trypsin selectively digests HA produced from egg or mammalian cell in monovalent vaccines that is altered by stress conditions such as reduced pH, elevated temperature, or deamidation, leaving native, pre-fusion HA, intact. Subsequent reverse-phase high pressure liquid chromatography (RP-HPLC) can separate trypsin-resistant HA from the digested HA. Integration of the resulting RP-HPLC peak yields HA quantities that match well the values obtained by SRID. Therefore, trypsin digestion, to pre-select immunologically active HA, followed by quantification by RP-HPLC is a promising alternative in vitro potency assay for influenza vaccines.

Evaluation of Epic® label-free technology to quantify functional recombinant hemagglutinin.

BackgroundAlternative methods are being sought to measure the potency of influenza vaccines. Label-free technologies that do not require the use of hemagglutinin (HA)-specific antisera are particularly attractive as the preparation of antiserum delays availability of potency reagents. The objective of these experiments was to evaluate the use of a Corning Epic® label-free method to quantify functional influenza hemagglutinin in rHA preparations. The method was optimized to quantify recombinant HA (rHA) of B/Brisbane/60/2008 (B/BR/08). Fetuin was immobilized onto plates and the change in wavelength of refracted light measured using an Enspire (Perkin Elmer) instrument.ResultsThe change in wavelength measured in response to addition of rHA of B/BR/08 was proportional to its concentration and was optimal in the presence of native rHA conformations. However, the assay was strain-dependent and did not correlate with HAU measured using turkey red blood cells.ConclusionsThe Corning Epic® label-free method is suitable for quantifying the native forms of rHA for B/BR/08 and A/Brisbane/59/2007 (H1N1) and A/Hangxhou/3/2013 (H7N9). This method is a useful tool for research purposes but further investigation is needed to identify suitable glycoproteins to use as ligands that allow quantification of HAs from a broader range of virus strains.Electronic supplementary materialThe online version of this article (doi:10.1186/s12575-015-0019-5) contains supplementary material, which is available to authorized users.

Titer on chip: new analytical tool for influenza vaccine potency determination.

Titer on Chip (Flu-ToC) is a new technique for quantification of influenza hemagglutinin (HA) concentration. In order to evaluate the potential of this new technique, a comparison of Flu-ToC to more conventional methods was conducted using recombinant HA produced in a baculovirus expression system as a test case. Samples from current vaccine strains were collected from four different steps in the manufacturing process. A total of 19 samples were analysed by Flu-ToC (blinded), single radial immunodiffusion (SRID), an enzyme-linked immunosorbent assay (ELISA), and the purity adjusted bicinchoninic acid assay (paBCA). The results indicated reasonable linear correlation between Flu-ToC and SRID, ELISA, and paBCA, with regression slopes of log-log plots being 0.91, 1.03, and 0.91, respectively. The average ratio for HA content measured by Flu-ToC relative to SRID, ELISA, and paBCA was 83%, 147%, and 81%, respectively; indicating nearly equivalent potency determination for Flu-ToC relative to SRID and paBCA. These results, combined with demonstrated multiplexed analysis of all components within a quadrivalent formulation and robust response to HA strains over a wide time period, support the conclusion that Flu-ToC can be used as a reliable and time-saving alternative potency assay for influenza vaccines.

Novel antibody-independent receptor-binding SPR-based assay for rapid measurement of influenza vaccine potency

A WHO workshop organized following the 2009 H1N1 pandemic recommended development of alternative influenza vaccine potency assays as high priority that could expedite the release of vaccine lots in the face of future influenza pandemics. We have developed an antibody independent, simple, high throughput receptor-binding SPR-based potency assay, which does not require any reference antisera and could be used for rapid HA quantitation and vaccine release in pandemic scenarios. The assay utilizes synthetic glycans with sialic acid (SA) of either α-2,6 or α-2,3 linkage to galactose. Only functionally active forms of HA (trimers and oligomers) recognize the SA-glycans and are quantified in this receptor-binding SPR assay. The SA-glycan SPR assay demonstrated broad dynamic range for quantitation of HA content in influenza vaccines from different manufacturers for both seasonal (A/H1N1, A/H3N2, B lineages) and pandemic influenza (A/H5N1, A/H7N9) strains with high reproducibility and low variability across multiple assays. In addition, the SA-glycan SPR assay is indicative of active HA stability, and can accurately quantify HA content in alum and oil-in-water adjuvanted influenza vaccines. Importantly, there was a good agreement between HA content determined by the SPR-based potency assay and the traditional SRID assay.

Potency under pressure: the impact of hydrostatic pressure on antigenic properties of influenza virus hemagglutinin

Influenza vaccines are effective in protecting against illness and death caused by this seasonal pathogen. The potency of influenza vaccines is measured by single radial immunodiffusion (SRID) assay that quantifies antigenic forms of hemagglutinin (HA). Hydrostatic pressure results in loss of binding of influenza virus to red blood cells, but it is not known whether this infers loss of potency. Our goal was to determine the impact of pressure on HA antigenic structure. Viruses included in the 2010-2011 trivalent influenza vaccine were subjected to increasing number of cycles at 35,000 psi in a barocycler, and the impact of this treatment measured by determining hemagglutination units (HAU) and potency. Potency was assessed by SRID and immunogenicity in mice. After 25 cycles of pressure, the potency measured by SRID assay was below the limit of quantification for the H1N1 and B viruses used in our study, while the H3N2 component retained some potency that was lost after 50 pressure cycles. Pressure treatment also resulted in loss of HAU, but this did not strictly correlate with the potency value. Curiously, loss of potency was abrogated when influenza A, but not B, antigens were exposed to pressure in chicken egg allantoic fluid. Protection against pressure appeared to be mediated by specific interactions because addition of bovine serum albumin did not have the same effect. Our results show that pressure-induced loss of potency is strain dependent and suggests that pressure treatment may be useful for identifying vaccine formulations that improve HA stability.

Quantitative Analyses of all Influenza Type A Viral Hemagglutinins and Neuraminidases using Universal Antibodies in Simple Slot Blot Assays

Hemagglutinin (HA) and neuraminidase (NA) are two surface proteins of influenza viruses which are known to play important roles in the viral life cycle and the induction of protective immune responses1,2. As the main target for neutralizing antibodies, HA is currently used as the influenza vaccine potency marker and is measured by single radial immunodiffusion (SRID)3. However, the dependence of SRID on the availability of the corresponding subtype-specific antisera causes a minimum of 2-3 months delay for the release of every new vaccine. Moreover, despite evidence that NA also induces protective immunity4, the amount of NA in influenza vaccines is not yet standardized due to a lack of appropriate reagents or analytical method5. Thus, simple alternative methods capable of quantifying HA and NA antigens are desirable for rapid release and better quality control of influenza vaccines. Universally conserved regions in all available influenza A HA and NA sequences were identified by bioinformatics analyses6-7. One sequence (designated as Uni-1) was identified in the only universally conserved epitope of HA, the fusion peptide6, while two conserved sequences were identified in neuraminidases, one close to the enzymatic active site (designated as HCA-2) and the other close to the N-terminus (designated as HCA-3)7. Peptides with these amino acid sequences were synthesized and used to immunize rabbits for the production of antibodies. The antibody against the Uni-1 epitope of HA was able to bind to 13 subtypes of influenza A HA (H1-H13) while the antibodies against the HCA-2 and HCA-3 regions of NA were capable of binding all 9 NA subtypes. All antibodies showed remarkable specificity against the viral sequences as evidenced by the observation that no cross-reactivity to allantoic proteins was detected. These universal antibodies were then used to develop slot blot assays to quantify HA and NA in influenza A vaccines without the need for specific antisera7,8. Vaccine samples were applied onto a PVDF membrane using a slot blot apparatus along with reference standards diluted to various concentrations. For the detection of HA, samples and standard were first diluted in Tris-buffered saline (TBS) containing 4M urea while for the measurement of NA they were diluted in TBS containing 0.01% Zwittergent as these conditions significantly improved the detection sensitivity. Following the detection of the HA and NA antigens by immunoblotting with their respective universal antibodies, signal intensities were quantified by densitometry. Amounts of HA and NA in the vaccines were then calculated using a standard curve established with the signal intensities of the various concentrations of the references used. Given that these antibodies bind to universal epitopes in HA or NA, interested investigators could use them as research tools in immunoassays other than the slot blot only.

Quantitative Analyses of all Influenza Type A Viral Hemagglutinins and Neuraminidases using Universal Antibodies in Simple Slot Blot Assays

Hemagglutinin (HA) and neuraminidase (NA) are two surface proteins of influenza viruses which are known to play important roles in the viral life cycle and the induction of protective immune responses(1,2). As the main target for neutralizing antibodies, HA is currently used as the influenza vaccine potency marker and is measured by single radial immunodiffusion (SRID)(3). However, the dependence of SRID on the availability of the corresponding subtype-specific antisera causes a minimum of 2-3 months delay for the release of every new vaccine. Moreover, despite evidence that NA also induces protective immunity(4), the amount of NA in influenza vaccines is not yet standardized due to a lack of appropriate reagents or analytical method(5). Thus, simple alternative methods capable of quantifying HA and NA antigens are desirable for rapid release and better quality control of influenza vaccines. Universally conserved regions in all available influenza A HA and NA sequences were identified by bioinformatics analyses(6-7). One sequence (designated as Uni-1) was identified in the only universally conserved epitope of HA, the fusion peptide(6), while two conserved sequences were identified in neuraminidases, one close to the enzymatic active site (designated as HCA-2) and the other close to the N-terminus (designated as HCA-3)(7). Peptides with these amino acid sequences were synthesized and used to immunize rabbits for the production of antibodies. The antibody against the Uni-1 epitope of HA was able to bind to 13 subtypes of influenza A HA (H1-H13) while the antibodies against the HCA-2 and HCA-3 regions of NA were capable of binding all 9 NA subtypes. All antibodies showed remarkable specificity against the viral sequences as evidenced by the observation that no cross-reactivity to allantoic proteins was detected. These universal antibodies were then used to develop slot blot assays to quantify HA and NA in influenza A vaccines without the need for specific antisera(7,8). Vaccine samples were applied onto a PVDF membrane using a slot blot apparatus along with reference standards diluted to various concentrations. For the detection of HA, samples and standard were first diluted in Tris-buffered saline (TBS) containing 4M urea while for the measurement of NA they were diluted in TBS containing 0.01% Zwittergent as these conditions significantly improved the detection sensitivity. Following the detection of the HA and NA antigens by immunoblotting with their respective universal antibodies, signal intensities were quantified by densitometry. Amounts of HA and NA in the vaccines were then calculated using a standard curve established with the signal intensities of the various concentrations of the references used. Given that these antibodies bind to universal epitopes in HA or NA, interested investigators could use them as research tools in immunoassays other than the slot blot only.

Influenza neuraminidase-inhibiting antibodies are induced in the presence of zanamivir

Seasonal influenza epidemics cause illness and death each year, and the emergence of antigenically novel influenza A viruses are a continual pandemic threat. Disease and death can be averted by vaccination. The potency of killed virus vaccines is based on hemagglutinin (HA) content. However, antibodies that inhibit enzyme activity of the neuraminidase (NA) also reduce virus replication and protect against disease. Monoclonal NA-inhibiting (NI) antibodies recognize conformational epitopes, and it is anticipated that native tertiary structure is required for their induction. NA assembles as a tetramer and only this form has enzyme activity. Since small inhibitors of NA do not significantly alter conformation, we sought to determine whether neuraminidase-inhibiting (NI) antibodies would be induced by inhibitor-inactivated NA. We therefore evaluated responses of mice immunized with purified NA that was either inactivated by addition of zanamivir or denatured by heat treatment. NI antibodies were induced following immunization with NA from A/Wisconsin/67/2005 (H3N2) in which enzyme activity was inhibited by the former method but not the latter. Protection of mice against challenge with virus containing an antigenically matched NA correlated with the detection of NI antibodies in serum. Similar results were obtained when mice were immunized with whole H1N1 virus in which NA activity had been inhibited by the same two modalities. This demonstrates that native conformation of NA is necessary for induction of NI antibodies; enzyme activity provides a useful marker of intact structure, but absence of activity in NA that is correctly folded does not result in loss of immunogenicity. Thus any assay to assess potency of influenza vaccines with respect to NA content should consider the proportion of NA that is in a structurally native state.