Post-polymerization Modification Research Articles

Fast and Scalable Synthetic Route to Densely Grafted, Branched Polystyrenes and Polydienes via Anionic Polymerization Utilizing P2VP as Branching Point.

Defined, branched polymer architectures with low dispersity and architectural purity are of great interest to polymer science but are challenging to synthesize. Besides star and comb, especially the pom-pom topology is of interest as it is the simplest topology with exactly two branching points. Most synthetic approaches to a pom-pom topology reported a lack of full control and variability over one of the three topological parameters, the backbone or arm molecular weight and arm number. A new, elegant, fast, and scalable synthetic route without the need for post-polymerization modification (PPM) or purification steps during the synthesis to a pom-pom and a broad variety of topologies made from styrene and dienes is reported, with potential application to barbwire, bottlebrush, miktoarm star, Janus type polymers, or multi-graft copolymers. The key is to inset short poly(2-vinyl-pyridine) blocks (<2 mol% in the branched product) into the backbone as branching points. Carb anions can react at the C6 carbon of the pyridine ring, grafting the arms onto the backbone. Since the synthetic route to polystyrene pom-poms has only two steps and is free of PPM or purification, large amounts of up to 300g of defined pom-pom structures can be synthesized in one batch.

Access to Functionalized Materials by Metal-Free Ring-Opening Metathesis Polymerization of Active Esters and Divergent Postpolymerization Modification.

Metal-free ring-opening metathesis polymerization (MF-ROMP) is an emerging polymerization strategy that provides access to ROMP materials by using organic initiators and photoredox catalysts. Unlike metal-mediated ROMP, MF-ROMP is not highly tolerant toward functionalized monomers. Herein, we report that pentafluorophenyl esters are polymerizable under MF-ROMP conditions to produce homopolymers, statistical copolymers, and block copolymers. Amine coupling agents were then used to install a range of functional groups via acyl substitution including alkynes, amino acid derivatives, fluorophores, and redox active moieties. Overall, these findings provide a framework to prepare functionalized ROMP polymers without the risk of metal contamination.

Diversification of Acrylamide Polymers via Direct Transamidation of Unactivated Tertiary Amides.

Postpolymerization modification offers a versatile strategy for synthesizing complex macromolecules, yet modifying acrylamide polymers like poly(N,N-dimethylacrylamide) (PDMA) is notoriously challenging due to the inherent stability and low reactivity of amide bonds. In this study, we unveil a novel approach for the direct transamidation of PDMA, leveraging recent advances in the transamidation of unactivated tertiary amide substrates. By exploiting photoiniferter polymerization, we extended this direct transamidation approach to ultrahigh-molecular-weight (UHMW) PDMA, showcasing the unprecedented postpolymerization modification of synthetic polymers exceeding 106 g/mol. We also designed acrylamide copolymers comprising both the moderately reactive N-methyl-N-phenyl tertiary amides, along with the less reactive, fully alkyl-substituted N,N-dimethyl amides inherent to PDMA. This disparate reactivity enabled a sequential, chemoselective transamidation by initially targeting the more reactive pendant aryl amides with less nucleophilic aromatic amines, and second, transamidating the untouched N,N-dimethyl amide moieties with more nucleophilic aliphatic amines, yielding a uniquely diversified acrylamide copolymer. This work not only broadens the scope of postpolymerization modification strategies by pioneering direct transamidation of unactivated amides but also provides a robust platform for the design of intricate macromolecules, particularly in the realm of UHMW polymers.

Functionalized [2.2]Paracyclophanedienes as Monomers for Poly(p-phenylenevinylene)s.

Poly(p-phenylenevinylene)s (PPVs) featuring complex side-chains, to date, have only been synthesized by nonliving polymerization methods which have no control over PPV molecular weights, dispersities, or end groups. [2.2]Paracyclophane-1,9-diene (pCpd) has gained attention as a monomer for its ability to be ring-opened to PPV in a living fashion. pCpd, an organic cyclic scaffold with planar chirality, has seen minimal structural diversity due to the harsh reaction conditions required to afford the highly strained compound. Herein, we introduce a general method to overcome this by targeting the synthesis of a monohydroxy-pCpd via mono-demethylation of a dialkoxy-pCpd. The monohydroxy-pCpd can then be functionalized easily, which we demonstrate using three distinct side-chains with four moieties commonly incorporated in conjugated polymers: an alkyl bromide, an oligo(ethylene glycol) chain, an enantiomerically pure side-chain, and a Boc-protected amine. These monofunctionalized-pCpds were investigated as monomers in the ring-opening metathesis polymerization (ROMP) to afford functionalized PPVs in a living manner. The functional-group-containing PPVs are synthesized with full control over their end groups, repeat units, and dispersities. The feasibility of post-polymerization modifications to incorporate any desired moiety to PPV fabricated by this method was demonstrated using an azide-alkyne click reaction. All synthesized PPVs were soluble in organic solvents and display the same fluorescent emission, indicating their conjugated backbones are unaltered.

Reactive degradable linear poly(aminoamide)s: synthesis, post-polymerization modifications and layer-by-layer coating

A sustainable approach is presented to synthesize reactive biodegradable indole decorated linear poly(aminoamide) (PAA) which provides a platform to generate different functional linear PAAs, dynamic PAA networks and coatings via post-polymerization modification using triazolinedione-indole reaction.

Amphiphilic–zwitterionic block polymers

Amphiphilic zwitterionic (AZ) block copolymers are readily prepared using post-polymerization modification, which offers exciting prospects for structure property relationship studies.

Monolithic stationary phases prepared via cyclic anhydride ring-opening polymerization as tunable platforms for chromatographic applications.

Polymer monolithic stationary phases were prepared based on a cyclic anhydride as a reactive and tunable platform via ring-opening post-polymerization using primary amines, octadecylamine and benzylamine. The characterization techniques indicated the insertion of the functional groups into the original monoliths and confirmed the amidation reactions. The post-polymerization modification also improved the monolith's thermal and mechanical stability and induced significant improvement in their surface area. The stationary phases were synthesized inside small dimension stainless-steel columns (2.1 mm i.d. × 50 mm length). The prepared columns before and after modifications have been tested for the separation of the alkylbenzene series and some polycyclic aromatic hydrocarbons (PAHs) as model compounds. In all cases, the chromatographic performance in terms of the height equivalent to a theoretical plate on the functionalized monoliths was remarkably improved when compared with that on the unmodified monolith, which was between 9.59-39.49 μm and 4.08-31.50 μm using monoliths modified with octadecylamine and benzylamine, respectively. Under the same chromatographic conditions, the functionalization of monoliths with octadecylamine provided more hydrophobic interactions and enhanced the retention of alkylbenzenes, while the modification of monoliths with benzyl groups improved the separation and the retention of the PAHs through the strong π-π interactions. However, post-modification polymerization with octadecylamine and benzylamine enhanced the separation efficiency of the prepared columns toward all studied compounds. The repeatability of the injections on the same column and the reproducibility of the prepared columns have been studied for some selected parameters and estimated in terms of percent relative standard deviation (%RSD) for some of the studied compounds. The repeatability of the prepared columns was ≤9.42% (n = 5) based on run-to-run injections and ≤9.48% based on day-to-day injections for five successive days. The reproducibility levels, on the other hand, were ≤20.95% for all studied parameters in all cases. To assess their performance for the analysis of real samples, the applicability of the prepared columns was examined for the separation of the active ingredients extracted from some commercial pharmaceutical formulations and for the separation of tea water extract constituents. The validation data show the suitability of the columns for practical use in the routine analysis of these samples.

Synthesis of polyvinylethylene glycols (PVEGs) via polyetherification of vinylethylene carbonate by synergistic catalysis.

An efficient and controllable polyetherification of vinylethylene carbonate (VEC) using diols as initiators is developed. By using a synergistic catalysis with palladium and boron reagents under mild conditions, the polymerization process enables the regioselective production of a series of polyvinylethylene glycols (PVEGs) bearing pendent vinyl groups in high yields with accurate molecular weight control and narrow molecular weight distribution. The utility of PVEGs is demonstrated by the production of functional polyurethanes and post-polymerization modification via thiol-ene photo-click chemistry.

Synthesis of a sulfonamide functionalized poly(styrene oxide) and illustration of a potential post-polymerization strategy

Herein, we demonstrate a design concept for the functionalization of styrene oxide with a sulfonamide protecting group, its respective ring-opening-polymerization, and a related post-polymerization modification.

Liquid-assisted grinding enables a direct mechanochemical functionalization of polystyrene waste.

The plastic waste crisis has grave consequences for our environment, as most single-use commodity polymers remain in landfills and oceans long after their commercial lifetimes. Utilizing modern synthetic techniques to chemically modify the structure of these post-consumer plastics (e.g., upcycling) can impart new properties and added value for commercial applications. To expand beyond the abilities of current solution-state chemical processes, we demonstrate post-polymerization modification of polystyrene via solid-state mechanochemistry enabled by liquid-assisted grinding (LAG). Importantly, this emblematic trifluoromethylation study modifies discarded plastic, including dyed materials, using minimal exogenous solvent and plasticizers for improved sustainability. Ultimately, this work serves as a proof-of-concept for the direct mechanochemical post-polymerization modification of commodity polymers, and we expect future remediation of plastic waste via similar mechanochemical reactions.

1,3-Dipolar cyclisation reactions of nitriles with sterically encumbered cyclic triphosphanes: synthesis and electronic structure of phosphorus-rich heterocycles with tunable colour.

We describe the synthesis, solid state and electronic structures of a series of tunable five-membered cationic and charge-neutral inorganic heterocycles featuring a P3CN core. 1-Aza-2,3,4-triphospholenium cations [(PR)3N(H)CR']+, [1R]+ (R' = Me, Ph, 4-MeOC6H4, 4-CF3C6H4) were formed as triflate salts by the formal [3 + 2]-cyclisation reactions of strained cyclic triphosphanes (PR)3 (R = t Bu, 2,4,6-Me3C6H2 (Mes), 2,6- i Pr2C6H3 (Dipp), 2,4,6- i Pr3C6H2 (Tipp)) with nitriles R'CN in the presence of triflic acid. The corresponding neutral free bases (PR)3NCR' (2R) were readily obtained by subsequent deprotonation with NEt3. The P3CN cores in 2R show an envelope conformation typical for cyclopentenes and present as yellow to orange compounds in the solid state as well as in solution depending on both substituents R and R' in (PR)3NCR'. The P3CN cores in [1R]+ show a significant deviation from planarity with increasing steric bulk of the R groups at phosphorus, which results in a decrease in the HOMO-LUMO gap and distinct low-energy UV-Visible absorption bands. This allows access to colours spanning red, blue, indigo, and magenta. TD-DFT calculations provide valuable insight into this phenomenon and indicate an intramolecular charge-transfer from the HOMO located on the P3 framework to the N[double bond, length as m-dash]C-R'-based LUMO in the cationic species. The cations [1R]+ represent rare examples of phosphorus-rich heterocycles with tunable colour, which can be incorporated into polymers by post-polymerization modification to afford coloured polymers, which demonstrate utility as both proton and ammonia sensors.

Stealth Behavior of Poly(ethyloxazoline)s-Modified Hydroxyethyl Starch-Based Nanocapsules

Poly(oxazoline)s (POZs) are a “new” class of biocompatible polymers that show unique and specific properties for modern biomedical and biomaterials design applications. In this work, POZs-coupled hydroxyethyl starch nanocapsules were developed in order to create a powerful protein suppressor vehicle. Herein, POZs of different molecular weights were used to functionalize the well-known hydroxyethyl starch nanocapsules (HES) surface by metal-free “click” chemistry, in which HES have also been related to immune suppressor property. For each modification step, the capsules were characterized regarding size, morphology and charge surface, and, as expected, the “click” strategy kept a core-shell structure with an average diameter distribution &lt; 200 nm. Additionally, previous to the post-polymerization modification step, the amount of free amino groups was determined by fluorescence intensity, allowing further “click” coupling of the surface of the capsules with POZs, later confirmed by gel permeation chromatography. Protein corona evaluation and aggregation assays in human plasma showed lower protein attaching for POZ-modified HES nanocapsules, than HES modified with polyethylene glycol (“PEGylated”-HES) and unmodified HES. Indeed, around 35% of “hard” protein corona of POZ-modified HES are clusterins, the apolipoprotein that can reduce the nonspecific cellular uptake into macrophages, indicating that POZs have stealth behavior similar to polyethylene glycol (PEG), being a potential alternative to “PEGylated”-based nanocarriers.

Tricyclononenes and tricyclononadienes as efficient monomers for controlled ROMP: understanding structure–propagation rate relationships and enabling facile post-polymerization modification

A tricyclononene and tricyclononadiene monomer library is studied experimentally and computationally to deepen understanding of structure propagation rate relationships in ROMP. A novel poly(tricyclononadiene) post-ROMP functionalization is explored.

Probing the Solubility of Imine-Based Covalent Adaptable Networks.

Covalent adaptable networks (CANs) are polymer materials that are covalently cross-linked via dynamic covalent bonds. The cross-linked polymer network is generally expected to be insoluble, as is seen for traditional thermosets. However, in recent years, it has become apparent that-under certain conditions-both dissociative and associative CANs can be dissolved in a good solvent. For some applications (e.g., those that require long-term (chemical) stability), the solubility of CANs can be problematic. However, many forget that (selective) solubility of CANs can also be applied advantageously, for example, in recycling or modification of the materials. In this work, we provide results and insights related to the tunable solubility of imine-based CANs. We observed that selected CANs could be fully dissolved in a good solvent without observing dissociation of imines. Only in an acidic environment (partial) dissociation of imines was observed, which could be reverted to the associated state by addition of a base. By adjusting the network composition, we were able to either facilitate or hamper solubility as well as control the size of the dissolved particles. DLS showed that the size of dissolved polymer particles decreased at lower concentrations. Similarly, decreasing cross-linking density resulted in smaller particles. Last, we showed that we could use the solubility of the CANs as a means for chemical recycling and postpolymerization modification. The combination of our studies with existing literature provides a better understanding of the solubility of CANs and their applications as recyclable thermosets.

Anionic Hyperbranched Amphiphilic Polyelectrolytes as Nanocarriers for Antimicrobial Proteins and Peptides.

This manuscript presents the synthesis of hyperbranched amphiphilic poly (lauryl methacrylate-co-tert-butyl methacrylate-co-methacrylic acid), H-P(LMA-co-tBMA-co-MAA) copolymers via reversible addition fragmentation chain transfer (RAFT) copolymerization of tBMA and LMA, and their post-polymerization modification to anionic amphiphilic polyelectrolytes. The focus is on investigating whether the combination of the hydrophobic characters of LMA and tBMA segments, as well as the polyelectrolyte and hydrophilic properties of MAA segments, both distributed within a unique hyperbranched polymer chain topology, would result in intriguing, branched copolymers with the potential to be applied in nanomedicine. Therefore, we studied the self-assembly behavior of these copolymers in aqueous media, as well as their ability to form complexes with cationic proteins, namely lysozyme (LYZ) and polymyxin (PMX). Various physicochemical characterization techniques, including size exclusion chromatography (SEC) and proton nuclear magnetic resonance (1H-NMR), verified the molecular characteristics of these well-defined copolymers, whereas light scattering and fluorescence spectroscopy techniques revealed promising nanoparticle (NP) self- and co-assembly properties of the copolymers in aqueous media.

Fabrication of GSH‐Responsive Poly(Tertiary Amine‐Oxide)‐Based Nanomedicines for Enhanced Anticancer Drug Release

AbstractPoly(tertiary amine‐oxide)‐based polymeric nanocarriers have showed more functionalities than stealthy PEG‐based analogs due to the structure of phospholipid affinitive N‐oxides groups, which has attracted considerable attention to the synthesis of various zwitterionic copolymers with tertiary amine‐oxide grafts for enhanced anticancer drug delivery. However, poly(tertiary amine‐oxide)‐based amphiphilic copolymers with tumor intracellular microenvironment sensitivities, to the knowledge, have been rarely reported likely due to the lack of a controlled synthetic strategy. Herein, a reducible zwitterionic copolymer, poly(ε‐caprolactone)25‐SS‐poly(2‐(N‐oxide‐N,N‐diethylamino)ethyl methacrylate)30 (PCL25‐SS‐OPDEA30) is designed and synthesized successfully via combination of controlled polymerization techniques and post polymerization modification. Specifically, postoxidation of poly(tertiary amine) is confirmed to be a better synthetic strategy toward a well‐defined polymer structure relative to direct polymerization of N,N‐diethylaminoethyl methacrylate (ODEA). The effect of disulfide bridges on the self‐assembly behaviors, in vitro drug loading and drug release properties is investigated in detail. Notablely, the resulting micelles self‐assembled from PCL25‐SS‐OPDEA30 show much greater colloidal stability, higher drug loading content (DLC), and better in vitro tumor cell inhibition than the reduction‐insensitive counterparts. Overall, this study reports a robust strategy toward zwitterionic nanomedicines for on‐demand anticancer drug delivery.

Structural and optical properties of hybrid materials derived from gold nanoparticles in different polystyrene (PS)-b-poly(4-vinylpyridine) (P4VP) matrices

We introduce the preparation as well as the structural and optical properties of hybrid materials consisting of diblock copolymer matrices with gold nanoparticles. Anionically synthesized diblock copolymers of the PS-b-P4VP sequence, where PS: polystyrene and P4VP: poly(4-vinylpyridine) with well-defined characteristics were utilized as the polymer matrices. The specific pyridine-containing copolymers were selected due to their susceptibility to post-polymerization chemical modification reactions. Basic tertiary amines can be easily modified due to the presence of the nitrogen atom (N) in the 4-position (-para) of the aromatic ring in the monomeric units of poly(4-vinylpyridine). In this manner, the addition of either atoms or whole compounds as ion pairs is enabled. We report that the role of noble metal atoms in polymer matrices is dual. Firstly, microphase separation in the presence of heteroatoms occurs even in cases of extremely low molecular characteristics due to the increased repulsion between the components and secondly the excitation of plasmon resonance at the polymer/nanoparticle interface is induced. We believe that our work sheds light on the driving forces of self-assembly on the studied modified copolymers. The results strongly suggest that the hybrid materials can adopt well-defined morphologies even in very low molecular weights, a fact that renders them promising candidates for photonic applications.

Multifunctional Poly(2-ethyl-2-oxazoline) Copolymers Containing Dithiolane and Pentafluorophenyl Esters as Effective Reactive Linkers for Gold Surface Coatings.

Surface functionalization with biological macromolecules is an important task for the development of sensor materials, whereby the interaction with other biological materials should be suppressed. In this work, we developed a novel multifunctional poly(2-ethyl-2-oxazoline)-dithiolane conjugate as a versatile linker for gold surface immobilization of amine-containing biomolecules, containing poly(2-ethyl-2-oxazoline) as antifouling polymer, dithiolane for surface immobilization, and activated esters for protein conjugation. First, a well-defined carboxylic acid containing copoly(2-ethyl-2-oxazoline) was synthesized by cationic ring-opening copolymerization of 2-ethyl-2-oxazoline with a methyl ester-containing 2-oxazoline monomer, followed by postpolymerization modifications. The side-chain carboxylic groups were then converted to amine-reactive pentafluorophenyl (PFP) ester groups. Part of the PFP groups was used for the attachment of the dithiolane moiety, which can efficiently bind to gold surfaces. The final copolymer contained 1.4 mol% of dithiolane groups and 4.5 mol% of PFP groups. The copolymer structure was confirmed by several analytical techniques, including NMR spectroscopy and size-exclusion chromatography. The kinetics of the PFP ester aminolysis and hydrolysis demonstrated significantly faster amidation compared to hydrolysis, which is essential for subsequent protein conjugation. Successful coating of gold surfaces with the polymer was confirmed by spectroscopic ellipsometry, showing a polymer brush thickness of 4.77 nm. Subsequent modification of the coated surfaces was achieved using bovine serum albumin as a model protein. This study introduces a novel reactive polymer linker for gold surface functionalization and offers a versatile polymer platform for various applications including biosensing and surface functionalization.

Anionic polymerization of methyl methacrylate and chain-end modification via terminal-selective transesterification with bulky zincate

The anionic polymerization of methyl methacrylate (MMA) was investigated using dilithium tetra-tert-butylzincate (TBZL), which is a bulky zincate, as an initiator. Poly(methyl methacrylate) (PMMA) with a narrow molecular weight distribution was obtained by conducting the polymerization in toluene at −80 °C. Chain-end analysis revealed the formation of PMMA with a tert-butyl group at the α-end and a hydrogen atom at the ω-end. These results suggest the living nature of the present polymerization. However, a prolonged polymerization time or elevated temperature caused backbiting reactions. Postpolymerization modification of the formed PMMA was also investigated using TBZL as a transesterification catalyst. Chain-end analysis revealed that terminal-selective transesterification occurred only at the monomeric unit at the terminating chain end. Therefore, TBZL appears to play dual roles in the production of chain-end-modified PMMA: an initiator for anionic polymerization and a catalyst for terminal-selective transesterification.

Synthesis and Structural Insight into poly(dimethylsiloxane)-b-poly(2-vinylpyridine) Copolymers.

In this study, the use of anionic polymerization for the synthesis of living poly(dimethylsiloxane) or PDMS-Li+, as well as poly(2-vinylpyridine) or P2VP-Li+ homopolymers, and the subsequent use of chlorosilane chemistry in order for the two blocks to be covalently joined leading to PDMS-b-P2VP copolymers is proposed. High vacuum manipulations enabled the synthesis of well-defined materials with different molecular weights (Μ¯n, from 9.8 to 36.0 kg/mol) and volume fraction ratios (φ, from 0.15 to 0.67). The Μ¯n values, dispersity indices, and composition were determined through membrane/vapor pressure osmometry (MO/VPO), size exclusion chromatography (SEC), and proton nuclear magnetic resonance spectroscopy (1H NMR), respectively, while the thermal transitions were determined via differential scanning calorimetry (DSC). The morphological characterization results suggested that for common composition ratios, lamellar, cylindrical, and spherical phases with domain periodicities ranging from approximately 15 to 39 nm are formed. A post-polymerization chemical modification reaction to quaternize the nitrogen atom in some of the P2VP monomeric units in the copolymer with the highest P2VP content, and the additional characterizations through 1H NMR, infrared spectroscopy, DSC, and contact angle are reported. The synthesis, characterization, and quaternization of the copolymer structure are important findings toward the preparation of functional materials with enhanced properties suitable for various nanotechnology applications.