Posttraumatic Orbital Deformities Research Articles

Reconstruction of Post-Traumatic Orbital Defects and Deformities with Custom-Made Patient-Specific Implants: Evaluation of the Efficacy and Clinical Outcome

The main purpose of this article is to evaluate the efficacy of patient-specific implants (PSI) in treatment of patients with post-traumatic orbital defects and deformities. Twenty-three patients with post-traumatic orbital defects and deformities, who underwent subsequent reconstructive procedures using PSI, were included in the study. All the patients were examined according to the standard algorithm involving the local status examination, vision assessment, and computed tomography before and after surgery. The study findings show neither postoperative infectious complications nor decreased visual acuity or loss of visual fields. Functional disorders resolved in 65.2% of cases 1 month after the surgical intervention and in 86.96% of patients within a 3-month term. Positive aesthetic outcomes were seen in 95.7% of cases. Reconstruction with computer-aided design/computer-aided manufactured PSI is an effective procedure that allows accurate restoring of the complex orbital anatomy.

Correction of a Posttraumatic Orbital Deformity Using Three-Dimensional Modeling, Virtual Surgical Planning with Computer-Assisted Design, and Three-Dimensional Printing of Custom Implants.

We describe a case of complex, posttraumatic skull and orbital deformities that were evaluated and treated with advanced computer technology, including virtual surgical planning, three-dimensional (3D) modeling, and printed patient custom implants (PCI) fabricated by 3D printing. A 50-year-old man presented to our craniofacial referral center 1 year after failed reduction of complex left orbital, zygomatic, and frontal bone fractures due to a motorcycle collision. The patient's chief complaint was debilitating diplopia in all fields of gaze. On examination, he had left enophthalmos, left canthal displacement, lower eyelid ectropion, vertical orbital dystopia, and a laterally and inferiorly displaced, comminuted zygoma with orbital rim and frontal bone defects. The normal orbit was mirrored to precisely guide repositioning of the globe, orbital reconstruction, and cranioplasty. Preinjury appearance with normal globe position was restored with complete resolution of diplopia. Modern 3D technology allows the surgeon to better analyze complex orbital deformities and precisely plan surgical correction with the option of printing a PCI. These techniques were successfully applied to resolve a case of debilitating diplopia and aesthetic deficits after facial trauma. Further application of advanced 3D computer technology can potentially improve the results of severe orbital and craniofacial trauma reconstruction.

Three dimensional reconstruction of late post traumatic orbital wall defects by customized implants using CAD-CAM, 3D stereolithographic models: A case report

AimPurpose of this case report is to highlight the precision and accuracy obtained with patient specific implants for orbital reconstruction designed on the basis of volumetric analysis of orbital computed tomographic scan (CT) scans using virtual planning, computerised designing and manufacturing and stereolithographic models to correct late post-traumatic orbital deformities such as enophthalmos and diplopia. Material and methodsThis case report describes a patient who visited our outpatient clinic for correction of enophthalmos and persistent diplopia in upward gaze, seven months post trauma. Three dimensional (3D) virtual treatment planning was carried out by using the 3D CT data. The unaffected orbit of the contralateral side was superimposed on the deformed orbit to highlight the defect and a customized implant was designed in the desired size and shape on the virtual model using computer aided designing and manufacturing (CAD-CAM) and milled in titanium mesh for precise anatomic orbital reconstruction. ResultsThere was a marked improvement in both the diplopia in upward gaze and enophthalmos post surgery when the customized patient specific orbital implant was used. ConclusionThe concept of using customized implant with the help of 3D virtual treatment planning, 3D stereolithographic models and CAD-CAM greatly improves the correction of extremely difficult late post-traumatic orbital deformities.

Can customized implants correct enophthalmos and delayed diplopia in post-traumatic orbital deformities? A volumetric analysis

The purpose of this study was to determine whether orbital reconstruction with customized implants can correct post-traumatic orbital deformities such as late enophthalmos and delayed diplopia. The hypothesis proposed was that an overcorrection of the orbital volume is needed to resolve enophthalmos. A retrospective observational descriptive study was conducted. Patients with a major trauma who required customized orbital implants for the delayed treatment of unilateral orbital fractures that had initially been operated on using titanium mesh and/or osteosynthesis plates were included. The orbital volumes of the unaffected contralateral side, of the affected orbit after initial reconstruction with mesh, and of the affected orbit subsequently reconstructed with the customized implant were calculated. All of the patients included in this study had diplopia in the gaze position prior to the installation of the implant. In addition, they all had severe enophthalmos. After surgery, no patient with a customized implant showed diplopia. The enophthalmos was corrected in all but one case. On average, orbits reconstructed with customized implants had lower volumes compared to the unaffected contralateral side. In cases where the enophthalmos was resolved, the volume was reduced by an average of 8.55%. Further studies using a larger number of cases and with controlled volumetric corrections using CAD/CAM are needed.

Mirror-Imaged Rapid Prototype Skull Model and Pre-Molded Synthetic Scaffold to Achieve Optimal Orbital Cavity Reconstruction

Reconstruction of traumatic orbital wall defects has evolved to restore the original complex anatomy with the rapidly growing use of computer-aided design and prototyping. This study evaluated a mirror-imaged rapid prototype skull model and a pre-molded synthetic scaffold for traumatic orbital wall reconstruction. A single-center retrospective review was performed of patients who underwent orbital wall reconstruction after trauma from 2012 to 2014. Patients were included by admission through the emergency department after facial trauma or by a tertiary referral for post-traumatic orbital deformity. Three-dimensional (3D) computed tomogram-based mirror-imaged reconstruction images of the orbit and an individually manufactured rapid prototype skull model by a 3D printing technique were obtained for each case. Synthetic scaffolds were anatomically pre-molded using the skull model as guide and inserted at the individual orbital defect. Postoperative complications were assessed and 3D volumetric measurements of the orbital cavity were performed. Paired samples t test was used for statistical analysis. One hundred four patients with immediate orbital defect reconstructions and 23 post-traumatic orbital deformity reconstructions were included in this study. All reconstructions were successful without immediate postoperative complications, although there were 10 cases with mild enophthalmos and 2 cases with persistent diplopia. Reoperations were performed for 2 cases of persistent diplopia and secondary touchup procedures were performed to contour soft tissue in 4 cases. Postoperative volumetric measurement of the orbital cavity showed nonsignificant volume differences between the damaged orbit and the reconstructed orbit (21.35 ± 1.93 vs 20.93 ± 2.07 cm(2); P = .98). This protocol was extended to severe cases in which more than 40% of the orbital frame was lost and combined with extensive soft tissue defects. Traumatic orbital reconstruction can be optimized and successful using an individually manufactured rapid prototype skull model and a pre-molded synthetic scaffold by computer-aid design and manufacturing.

Virtual Surgical Planning for Orbital Reconstruction.

The advent of computer-assisted technology has revolutionized planning for complex craniofacial operations, including orbital reconstruction. Orbital reconstruction is ideally suited for virtual planning, as it allows the surgeon to assess the bony anatomy and critical neurovascular structures within the orbit, and plan osteotomies, fracture reductions, and orbital implant placement with efficiency and predictability. In this article, we review the use of virtual surgical planning for orbital decompression, posttraumatic midface reconstruction, reconstruction of a two-wall orbital defect, and reconstruction of a large orbital floor defect with a custom implant. The surgeon managing orbital pathology and posttraumatic orbital deformities can benefit immensely from utilizing virtual planning for various types of orbital pathology.

Virtual surgery simulation in orbital wall reconstruction: Integration of surgical navigation and stereolithographic models

PurposeCorrection of post traumatic orbital and zygomatic deformity is a challenge for maxillofacial surgeons. Integration of different technologies, such as software planning, surgical navigation and stereolithographic models, opens new horizons in terms of the surgeons' ability to tailor reconstruction to individual patients. The purpose of this study was to analyze surgical results, in order to verify the suitability, effectiveness and reproducibility of this new protocol. MethodsEleven patients were included in the study. Inclusion criteria were: unilateral orbital pathology; associated diplopia and enophthalmos or exophthalmos, and zygomatic deformities. Syndromic patients were excluded. Pre-surgical planning was performed with iPlan 3.0 CMF software and we used Vector Vision II (BrainLab, Feldkirchen, Germany) for surgical navigation. We used 1:1 skull stereolithographic models for all the patients. Orbital reconstructions were performed with a titanium orbital mesh. The results refer to: correction of the deformities, exophthalmos, enophthalmos and diplopia; correspondence between reconstruction mesh positioning and preoperative planning mirroring; and the difference between the reconstructed orbital volume and the healthy orbital volume. ResultsCorrespondence between the post-operative reconstruction mesh position and the presurgical virtual planning has an average margin of error of less than 1.3 mm. In terms of en- and exophthalmos corrections, we have always had an adequate clinical outcome with a significant change in the projection of the eyeball. In all cases treated, there was a complete resolution of diplopia. The calculation of orbital volume highlighted that the volume of the reconstructed orbit, in most cases, was equal to the healthy orbital volume, with a positive or negative variation of less than 1 cm3. ConclusionThe proposed protocol incorporates all the latest technologies to plan the virtual reconstruction surgery in detail. The results obtained from our experience are very encouraging and lead us to pursue this path.

An Examination of Posttraumatic, Postsurgical Orbital Deformities: Conclusions Drawn for Improvement of Primary Treatment

A retrospective analysis was carried out on the records of 317 patients operated on by the senior author (S.A.W.) for orbital fractures between 1975 and 2007. Two hundred forty of the patients had been previously operated on elsewhere and required further correction (posttraumatic, postsurgical orbital deformity). A smaller group of patients (n = 77) were operated on primarily. The two groups were not, of course, similar, because the posttraumatic, postsurgical orbital deformity group had been operated on by a variety of surgeons with varying levels of experience and ability, and the group of patients operated on primarily had a larger percentage of fractures in the pediatric age group, because of the practice being partially based in a children's hospital, and a larger percentage of severe, compound orbital injuries, because of statewide referrals. Nevertheless, a number of causes for reoperation seen in the posttraumatic, postsurgical orbital deformity group were not seen in the primarily operated group. These included lower eyelid retraction attributable to use of the subciliary incision, displacement and extrusion of alloplastic materials, and fixation of fractures in a nonreduced position. These differences validate, in the authors' opinion, the application of the basic principles of craniofacial reconstruction set forth by Paul Tessier, listed in the text, to both the primary and secondary treatment of posttraumatic orbital deformities.

O.034 Minimal invasive treatment of the fractured orbita

The skeletal reconstruction of post-traumatic orbital deformities includes the zygomatic complex, the nasoethmoid area and the internal orbit. Repositioning of the malpositioned zygoma is the key element and the first step. Due to remodelling processes, most of the landmarks for proper positioning are lost, leaving the lateral orbital wall as the only reliable landmark in secondary revisions. The details of the skeletal reconstruction are discussed. Between January 1988 and December 1992, 31 patients with major post-traumatic orbital deformities have been operated on, of which 26 could be followed for a minimum of 6 months. A total of 61 operative procedures using craniofacial techniques have been performed. Complications occurred in 5 (15%) of the 26 patients, the most severe being visual loss caused by a displaced bone graft.The most frequent deformity was enophthalmos. Most patients presented with more than one deformity.The aesthetic results were rated as ‘good’ in 12, ‘satisfactory’ in 8 and ‘unsatisfactory’ in 6 patients.Of the patients suffering from double vision, 55% were improved after orbital reconstruction. Craniofacial techniques allow radical correction of post-traumatic skeletal deformities. The functional and aesthetic results, however, are limited by the soft tissues.

High-Density Porous Polyethylene (Medpor) as a Successful Anophthalmic Socket Implant.

Karesh, J.; Dresner, S.Editor(s): Arterberry, Joe F. M.D., F.A.C.S., Editor Author Information

Correction of post-traumatic orbital deformities: operative techniques and review of 26 patients

The skeletal reconstruction of post-traumatic orbital deformities includes the zygomatic complex, the nasoethmoid area and the internal orbit. Repositioning of the malpositioned zygoma is the key element and the first step. Due to remodelling processes, most of the landmarks for proper positioning are lost, leaving the lateral orbital wall as the only reliable landmark in secondary revisions. The details of the skeletal reconstruction are discussed. Between January 1988 and December 1992, 31 patients with major post-traumatic orbital deformities have been operated on, of which 26 could be followed for a minimum of 6 months. A total of 61 operative procedures using craniofacial techniques have been performed. Complications occurred in 5 (15%) of the 26 patients, the most severe being visual loss caused by a displaced bone graft. The most frequent deformity was enophthalmos. Most patients presented with more than one deformity. The aesthetic results were rated as 'good' in 12, 'satisfactory' in 8 and 'unsatisfactory' in 6 patients. Of the patients suffering from double vision, 55% were improved after orbital reconstruction. Craniofacial techniques allow radical correction of post-traumatic skeletal deformities. The functional and aesthetic results, however, are limited by the soft tissues.

High-density Porous Polyethylene (Medpor) as a Successful Anophthalmic Socket Implant

High-density porous polyethylene (Medpor) has been used successfully as an implant in orbital fracture repair and in the management of both cosmetic and post-traumatic facial deformities. The material is well tolerated, resists infection, is nonantigenic, and promotes tissue ingrowth. Additionally, sutures can be passed through it. These characteristics led to its use as an implant in anophthalmic socket surgery. Twenty-one patients with anophthalmia underwent implantation of spherically shaped high-density porous polyethylene implants. The implant was used in six primary enucleations with direct extraocular muscle attachment, ten secondary implant insertions, one repeat secondary implant insertion, and five eviscerations. Postoperative follow-up averaged 19 months. During this period, there were no extrusions, infections, significant inflammatory responses, or implant exposures. One implant was removed 4 months after insertion due to inadequate initial placement secondary to a severe post-traumatic orbital deformity. Successful re-implantation was performed without complication. Postoperatively, all sockets showed good to excellent motility. Results of histologic examination of the removed implant demonstrated minimal inflammatory response and extensive fibrovascular ingrowth involving 60% of the implant substance. This initial report indicates that high-density porous polyethylene can be used successfully as an implant in anophthalmic socket surgery. Its advantages over other similar implants include a significantly lower material cost and the ability to suture the extraocular muscles directly to it without the need for a covering material such as fascia or sclera. Experimental studies are in progress to determine if this implant can be integrated with an ocular prosthesis to promote improved motility and cosmesis.

Secondary Reconstruction of Posttraumatic Orbital Deformities

A retrospective analysis of our experience, techniques, and concepts for the secondary reconstruction of orbital injuries to 78 patients over a 15-year period is presented. Secondary orbital reconstruction has the following four basic steps: (1) freeing of the overlying soft tissues by extensive subperiosteal dissection; (2) skeletal reconstruction, usually with onlay bone grafting and contour osteoplasty; (3) restoration of palpebral shape and position by medial and lateral canthopexy; and (4) soft-tissue refinement. Reconstruction required an average of at least two operations. In this series, there were no mortalities, three infections, and no reoperations for bleeding. Thirty patients required a second operation to an area previously addressed reflecting inadequacies in technique, the unpredictability of bone grafts, and soft-tissue scarring. Distortion of the skeletal infrastructure is most amenable to secondary reconstruction. Soft-tissue distortions that accompany bone malposition are less well corrected. Soft-tissue contraction is the limiting factor in successful reconstruction dictating separate movement of the overlying soft tissues and ligaments, their overcorrection, and subsequent revisional surgery. Secondary orbital reconstruction, although providing significant improvement, usually fails to restore the preinjury appearance, and usually falls short of properly performed acute reconstruction.

Treatment of the posttraumatic orbital deformities

Treatment of the posttraumatic orbital deformities

Treatment of Post-Traumatic Orbital Deformities

The author’s overall approach to the treatment of acute orbital injuries and subsequent late deformities is presented. Adequate exposure and complete osseous repair with tissues are the key to good results.

Treatment of Post-Traumatic Orbital Deformities

Correction of post-traumatic orbital deformities requires adequate exposure, often through coronal and intraoral approaches; adequate dissection, at times circumferential and to within 1 cm of the optic foramen; repositioning of displaced bone segments; refabrication of an orbital framework with autogenous materials; and reattachment of soft-tissue adnexae--all of which are basic maneuvers in craniofacial surgery.

Application of craniofacial surgical precepts in orbital reconstruction following trauma and tumour removal

Summary A number of patients with a spectrum of post-traumatic orbital deformities are presented in whom the application of basic craniofacial surgical principles aided in the correction of enophthalmos, exophthalmos, canthal and orbital dystopias, eyelid deformities, and lacrimal obstruction. Improved exposure and reconstructive possibilities in the treatment of orbital tumours has been another “spin-off” of craniofacial surgery.