Positive Sequence Load Flow Research Articles

A Machine Learning-Based Method for Identifying Critical Distance Relays for Transient Stability Studies

Protective relays play a crucial role in defining the dynamic responses of power systems during and after faults. Therefore, modeling protective relays in stability studies is crucial for enhancing the accuracy of these studies. Modeling all the relays in a bulk power system is a challenging task due to the limitations of stability software and the difficulties of keeping track of the changes in the setting information of these relays. Distance relays are one of the most important protective relays that are not properly modeled in current practices of stability studies. Hence, using the Random Forest algorithm, a fast machine learning-based method is developed in this paper that identifies the distance relays required to be modeled in stability studies of a contingency, referred to as critical distance relays (CDRs). GE positive sequence load flow analysis (PSLF) software is used to perform stability studies. The method is tested using 2018 summer peak load data of Western Electricity Coordinating Council (WECC) for various system conditions. The results illustrate the great performance of the method in identifying the CDRs. They also show that to conduct accurate stability studies, only modeling the CDRs suffices, and there is no need for modeling all the distance relays.

Integration of Renewable Based Distributed Generation for Distribution Network Expansion Planning

Electrical energy is critical to a country’s socioeconomic progress. Distribution system expansion planning addresses the services that must be installed for the distribution networks to meet the expected load need, while also meeting different operational and technical limitations. The incorporation of distributed generation sources (DGs) alters the operating characteristics of modern power systems, resulting in major economic and technical benefits, such as simplified distribution network expansion planning, lower power losses, and improved voltage profile. Thus, in this study, an analytical method is used to design the expansion planning of the Addis North distribution network considering the integration of optimal sizes of distributed generations for the projected demand growths. To evaluate the capability of the existing Addis North distribution network and its capability to supply reliable power considering future expansion, the load demand forecast for the years 2020–2030 is done using the least square method. The performance evaluation of the existing and the upgraded network considering the existing and forecasted load demand for the years 2030 is done using ETAP software. Accordingly, the results revealed that the existing networks cannot meet the existing load demand of the town, with major problems of increased power loss and a reduced voltage profile. To mitigate this problem, the Addis North feeder-1 distribution network is upgraded and for each study case, the balanced and positive sequence load flow analysis was executed and the maximum total real and reactive power losses were found at bus 29. The result shows that the upgraded network of bus 29 was the optimal location of DG and its size was 9.93 MW. After the optimal size of DG was placed at this bus, the real and reactive power losses of the upgraded networks were 0.2939 MW and 0.219 MVAr, respectively. At bus 29 the maximum power losses reduction and voltage profile improvements were found. The active and reactive power losses were minimized by 21.285% and 19.633% respectively and the voltage profiles were improved by 8.78%. Thus, in the predicted year 2030, DG power sources could cover 61.12% of the feeder-1 power requirements.

An Algorithmic Approach for Identifying Critical Distance Relays for Transient Stability Studies

After major disturbances, power system behavior is governed by the dynamic characteristics of its assets and protection schemes. Therefore, modeling protection devices is essential for performing accurate stability studies. Modeling all the protection devices in a bulk power system is an intractable task due to the limitations of current stability software, and the difficulty in updating the setting data for thousands of protection devices. One of the critical protection schemes that is not adequately modeled in stability studies is distance relaying. Therefore, this paper proposes an iterative algorithm that uses two methods to identify the critical distance relays to be modeled in stability studies: (i) apparent impedance monitoring, and (ii) the minimum voltage evaluation (MVE). The algorithm is implemented in Python 3.6 and uses the GE positive sequence load flow analysis (PSLF) software for performing stability studies. The performance of the algorithm is evaluated on the Western Electricity Coordinating Council (WECC) system data representing the 2018 summer-peak load. The results of the case studies representing various types of contingencies show that to have an accurate assessment of system behavior, modeling the critical distance relays identified by the algorithm suffices, and there is no need for modeling all the distance relays.

Bulk Electric Power System Risks From Coordinated Edge Devices

As smart load adoption grows on the electric power system, potential for losing load diversity increases, possibly in ways that impact system stability. Cloud computing resources are able to coordinate large amounts of behind-the-meter loads and resources. Inadvertent or malicious actions could potentially result in gigawatts of load, distributed across large regions, acting nearly simultaneously. We study the resulting impacts of such a perturbation, which were previously recognized, with improved fidelity and granularity using a physically-based power system and demand model. The ResStock tool was used to calculate residential air conditioning load at more than 3,000 locations across the Western Interconnection, corresponding in time to heavy summer and light spring loading. Under an assumption that one cloud platform managed smart thermostats controlling 10%, 15%, or 20% of residential air-conditioning, calculated load steps could be injected into Positive Sequence Load Flow dynamic simulations. These load-driven effects were coupled with two classes of distributed generation ride-through to evaluate the potential for cascading outages. We found frequency deviations in the spring case far exceed the credible contingency event, leading to widespread distributed generation loss, while voltage depressions during the summer loading lead to widespread distributed generation loss and system separation.

Coupled transmission and distribution simulations to assess distributed generation response to power system faults

The historical simulation approach of aggregating distributed generation (DG) with load for transmission simulations is proving inadequate at capturing these DG dynamics. Presented is a methodology that uses interfacing data sets to couple disparate simulations in an iterative manner. This methodology was implemented with a Positive Sequence Load Flow (PSLF) dynamic model of the Western Interconnection with 9 GW of DG. A transmission fault leading to a fault-induced delayed voltage recovery (FIDVR) is analyzed with this iterative coupled simulation method, with more than 120 substation voltage profiles extracted, representing more than 4 GW of DG, and simulated in OpenDSS to capture the ride-through dynamics. OpenDSS simulations of feeders populated with photovoltaic DG and associated time-dependent tripping and momentary cessation criteria based on the IEEE 1547 standard are performed. Coupled simulation results show significant differences in DG responses, as well as overall system responses, between single PSLF and the coupled simulations.

Developing of Quaternary Pumped Storage Hydropower for Dynamic Studies

Quaternary pumped storage hydropower (Q-PSH) technology, as one of the new advanced-PSH technology, has been developed by taking advantage of Conventional-PSH (C-PSH) and Adjustable Speed-PSH (AS-PSH). By combining adjustable-speed pump unit and conventional hydropower turbine unit in the quaternary configuration, Q-PSH has the more competitive capability of providing fast power support in the future high renewable penetrated power system. Acting as energy storage (ES), Q-PSH provides promising power supply to deal with the uncertainty and variability from renewable energy generation. This paper focuses on the dynamic modeling of Q-PSH technology employing full-converter machine and the impact of Q-PSH on the frequency response in a system. The detailed model of Q-PSH is developed and implemented in the IEEE 14-bus system based on GE Positive Sequence Load Flow (PSLF) platform, which captures the dynamic of multiple operation modes, especially hydraulic short-circuit (HSC) operation mode. Several cases are set up to reveal the advantages of Q-PSH technology when power electronic based renewable energy generation is deployed in the system. Sensitivity studies of the controller in pump governor show the impact of parameters in pump response performance. The comparison case illustrates the impact of frequency response provided by the Q-PSH in the system.

Modelling and simulation of ternary pumped storage hydropower for power system studies

As the deployment of wind and solar energy increases in the USA, energy storage (ES) will play an important role in future electric power grids to help manage the variability from high penetration levels of renewable generation, ES can provide promising power/energy demand to coordinate with renewables generation, as a virtual power plant (VPP). There is an industry need for the capability in power system studies to model ternary pumped storage hydropower (T-PSH), a pumped storage technology that offers increased system benefits. This study presents a comprehensive vendor-neutral dynamic model of T-PSH in GE's commercial software positive sequence load flow. A new governor model is developed with detailed gate valve modelling and a shared-penstock function. Specifically, this model is designed to simulate the seamless transition among three operation modes: generation mode, pumping mode, and hydraulic short-circuit mode. The developed T-PSH model has been tested and validated on a 10-bus test system. A comparison study of T-PSH to conventional pumped storage hydropower has also been conducted on the Western interconnection system.

Fluxo de carga em sistemas que apresentam linhas de potência natural elevada (LPNE)

Este trabalho apresenta um procedimento preciso para o cálculo de fluxo de carga em sistemas elétricos de potência nos quais estão presentes linhas de potência natural elevada (LPNE). A metodologia consiste no uso do fluxo de potência trifásico em coordenadas de fase para solução de um subsistema onde os efeitos dos desequilíbrios causados pelas linhas LPNEs são mais acentuados. Para o restante do sistema adota-se o tradicional fluxo de carga de seqüência positiva. O modelo proposto foi validado usando-se o sistema de 57 barras do IEEE.