Portal Vertex Research Articles

A temporal and spatial investigation of cyanophage abundance in the Gulf of Aqaba, Red Sea

The aim of this study was to determine the abundance of cyanophages over an annual cycle in the Red Sea from the period April 1999 to December 1999 at a range of depths. Cyanophage numbers from 71 water samples were determined by the use of plaque assays using four different Synechococcus strains. The results indicate that cyanophage are found throughout the water column from surface waters to depths of 150 m, with a discrete maximum in the number of cyanophages in the summer months of July, August and September at a depth of 30 m. Eighty-seven cyanophages were isolated and characterized in terms of host range, genome size and possession of a myoviral portal vertex gene. Cyanophages were found to infect multiple strains of Synechococcus from different phylogenetic clades. The genome sizes of cyanophages were also found to be bigger than previously estimated.

Functional Analysis of the Bacteriophage T4 DNA-packaging ATPase Motor

Packaging of double-stranded DNA into bacteriophage capsids is driven by one of the most powerful force-generating motors reported to date. The phage T4 motor is constituted by gene product 16 (gp16) (18 kDa; small terminase), gp17 (70 kDa; large terminase), and gp20 (61 kDa; dodecameric portal). Extensive sequence alignments revealed that numerous phage and viral large terminases encode a common Walker-B motif in the N-terminal ATPase domain. The gp17 motif consists of a highly conserved aspartate (Asp255) preceded by four hydrophobic residues (251MIYI254), which are predicted to form a beta-strand. Combinatorial mutagenesis demonstrated that mutations that compromised hydrophobicity, or integrity of the beta-strand, resulted in a null phenotype, whereas certain changes in hydrophobicity resulted in cs/ts phenotypes. No substitutions, including a highly conservative glutamate, are tolerated at the conserved aspartate. Biochemical analyses revealed that the Asp255 mutants showed no detectable in vitro DNA packaging activity. The purified D255E, D255N, D255T, D255V, and D255E/E256D mutant proteins exhibited defective ATP binding and very low or no gp16-stimulated ATPase activity. The nuclease activity of gp17 is, however, retained, albeit at a greatly reduced level. These data define the N-terminal ATPase center in terminases and show for the first time that subtle defects in the ATP-Mg complex formation at this center lead to a profound loss of phage DNA packaging.

Interaction of the Putative Human Cytomegalovirus Portal Protein pUL104 with the Large Terminase Subunit pUL56 and Its Inhibition by Benzimidazole- d -Ribonucleosides

Herpesvirus DNA replication leads to unit length genomes that are translocated into preformed procapsids through a unique portal vertex. The translocation is performed by the terminase that cleaves the DNA and powers the insertion by its ATPase activity. Recently, we demonstrated that the putative human cytomegalovirus (HCMV) portal protein, pUL104, also forms high-molecular-weight complexes. Analyses now have been performed to determine the intracellular localization and identification of interaction partners of pUL104. In infected cells, HCMV pUL104 was found to be predominantly localized throughout the nucleus as well as in cytoplasmic clusters at late times of infection. The latter localization was abolished by phosphonoacetic acid, an inhibitor of viral DNA replication. Immunofluorescence revealed that pUL104 colocalized with pUL56, the large subunit of the HCMV terminase. Specific association of in vitro translated pUL104 with the carboxy-terminal half of GST-UL56C was detected. By using coimmunoprecipitations a direct interaction with pUL56 was confirmed. In addition, this interaction was no longer detected when the benzimidazole-D-nucleosides BDCRB or Cl4RB were added, thus indicating that these HCMV inhibitors block the insertion of the DNA into the capsid by preventing a necessary interaction of pUL56 with the portal. Electron microscopy revealed that in the presence of Cl4RB DNA is not packaged into capsids and these capsids failed to egress from the nucleus. Furthermore, pulsed-field gel electrophoresis showed that DNA concatemers synthesized in the presence of the compound failed to be processed.

A Three-dimensional Cryo-electron Microscopy Structure of the Bacteriophage ϕKZ Head

The three-dimensional structure of the Pseudomonas aeruginosa bacteriophage phiKZ head has been determined by cryo-electron microscopy and image reconstruction to 18A resolution. The head has icosahedral symmetry measuring 1455 A in diameter along 5-fold axes and a unique portal vertex to which is attached an approximately 1800 A-long contractile tail. The 65 kDa major capsid protein, gp120, is organized into a surface lattice of hexamers, with T = 27 triangulation. The shape and size of the hexamers is similar to the hexameric building blocks of the bacteriophages T4, phi29, P22, and HK97. Pentameric vertices of the capsid are occupied by complexes composed of several special vertex proteins. The double-stranded genomic DNA is packaged into a highly condensed series of layers, separated by 24 A, that follow the contour of the inner wall of the capsid.

Bacteriophage P22 Tail Accessory Factor GP26 Is a Long Triple-stranded Coiled-coil

P22 is a well characterized tailed bacteriophage that infects Salmonella enterica serovar Typhimurium. It is characterized by a "short" tail, which is formed by five proteins: the dodecameric portal protein (gp1), three tail accessory factors (gp4, gp10, gp26), and six trimeric copies of the tail-spike protein (gp9). We have isolated the gene encoding tail accessory factor gp26, which is responsible for stabilization of viral DNA within the mature phage, and using a variety of biochemical and biophysical techniques we show that gp26 is very likely a triple stranded coiled-coil protein. Electron microscopic examination of purified gp26 indicates that the protein adopts a rod-like structure approximately 210 angstroms in length. This trimeric rod displays an exceedingly high intrinsic thermostability (T(m) approximately 85 degrees C), which suggests a potentially important structural role within the phage tail apparatus. We propose that gp26 forms the thin needle-like fiber emanating from the base of the P22 neck that has been observed by electron microscopy of negatively stained P22 virions. By analogy with viral trimeric coiled-coil class I membrane fusion proteins, gp26 may represent the membrane-penetrating device used by the phage to pierce the host outer membrane.

Integral membrane protein P16 of bacteriophage PRD1 stabilizes the adsorption vertex structure.

The icosahedral membrane-containing double-stranded DNA bacteriophage PRD1 has a labile receptor binding spike complex at the vertices. This complex, which is analogous to that of adenovirus, is formed of the penton protein P31, the spike protein P5, and the receptor binding protein P2. Upon infection, the internal phage membrane transforms into a tubular structure that protrudes through a vertex and penetrates the cell envelope for DNA injection. We describe here a new class of PRD1 mutants lacking virion-associated integral membrane protein P16. P16 links the spike complex to the viral membrane and is necessary for spike stability. We also show that the unique vertex used for DNA packaging is intact in the P16-deficient particle, indicating that the 11 adsorption vertices and the 1 portal vertex are functionally and structurally distinct.

Molecular architecture of the prolate head of bacteriophage T4

The head of bacteriophage T4 is a prolate icosahedron with one unique portal vertex to which the phage tail is attached. The three-dimensional structure of mature bacteriophage T4 head has been determined to 22-A resolution by using cryo-electron microscopy. The T4 capsid has a hexagonal surface lattice characterized by the triangulation numbers T(end) = 13 laevo for the icosahedral caps and T(mid) = 20 for the midsection. Hexamers of the major capsid protein gene product (gp)23* and pentamers of the vertex protein gp24*, as well as the outer surface proteins highly antigenic outer capsid protein (hoc) and small outer capsid protein (soc), are clearly evident in the reconstruction. The size and shape of the gp23* hexamers are similar to the major capsid protein organization of bacteriophage HK97. The binding sites and shape of the hoc and soc proteins have been established by analysis of the soc(-) and hoc(-)soc(-) T4 structures.

The portal protein plays essential roles at different steps of the SPP1 DNA packaging process

A large number of viruses use a specialized portal for entry of DNA to the viral capsid and for its polarized exit at the beginning of infection. These families of viruses assemble an icosahedral procapsid containing a portal protein oligomer in one of its 12 vertices. The viral ATPase (terminase) interacts with the portal vertex to form a powerful molecular motor that translocates DNA to the procapsid interior against a steep concentration gradient. The portal protein is an essential component of this DNA packaging machine. Characterization of single amino acid substitutions in the portal protein gp6 of bacteriophage SPP1 that block DNA packaging identified sequential steps in the packaging mechanism that require its action. Gp6 is essential at early steps of DNA packaging and for DNA translocation to the capsid interior, it affects the efficiency of DNA packaging, it is a central component of the headful sensor that determines the size of the packaged DNA molecule, and is essential for closure of the portal pore by the head completion proteins to prevent exit of the DNA encapsidated. Functional regions of gp6 necessary at each step are identified within its primary structure. The similarity between the architecture of portal oligomers and between the DNA packaging strategies of viruses using portals strongly suggests that the portal protein plays the same roles in a large number of viruses.

Defining the Bacteriophage T4 DNA Packaging Machine: Evidence for a C-terminal DNA Cleavage Domain in the Large Terminase/Packaging Protein gp17

Double-stranded DNA packaging in bacteriophage T4 and other viruses occurs by translocation of DNA into an empty prohead by a packaging machine assembled at the portal vertex. Coordinated with this complex process is the cutting of concatemeric DNA to initiate and terminate DNA packaging and encapsidate one genome-length viral DNA. The catalytic site responsible for cutting, and the mechanisms by which cutting is precisely coordinated with DNA translocation remained as interesting open questions. Phage T4, unlike the phages with defined ends (e.g. λ, T3, T7), packages DNA in a strictly headful manner, and exhibits no strict sequence specificity to initiate or terminate DNA packaging. Previous evidence suggests that the large terminase protein gp17, a key component of the T4 packaging machine, possesses a non-specific DNA cutting activity. A histidine-rich metal-binding motif, H382-X 2-H385-X 16-C402-X 8-H411-X 2-H414-X 15-H430-X 5-H436, in the C-terminal half of gp17 is thought to be involved in the terminase cleavage. Here, exhaustive site-directed mutagenesis revealed that none of the cysteine and histidine residues other than the H436 residue is critical for function. On the other hand, a cluster of conserved residues within this region, D401, E404, G405, and D409, are found to be critical for function. Biochemical analyses showed that the D401 mutants exhibited a novel phenotype, showing a loss of in vivo DNA cutting activity but not the DNA packaging activity. The functional nature of the critical residues and their disposition in the conserved loop region between two predicted β-strands suggest that these residues are part of a metal-coordinated catalytic site that cleaves the phosphodiester bond of DNA substrate. The data suggest that the T4 terminase consists of at least two functional domains, an N-terminal DNA-translocating ATPase domain and a C-terminal DNA-cutting domain. Although the DNA recognition mechanisms may be distinct, it appears that T4 and other phage terminases employ a common catalytic paradigm for phosphodiester bond cleavage that is used by numerous nucleases.

The physical environment affects cyanophage communities in British Columbia inlets.

Little is known about the natural distribution of viruses that infect the photosynthetically important group of marine prokaryotes, the cyanobacteria. The current investigation reveals that the structure of cyanophage communities is dependent on water column structure. PCR was used to amplify a fragment of the cyanomyovirus gene (g) 20, which codes for the portal vertex protein. Denaturing gradient gel electrophoresis (DGGE) of PCR amplified g20 gene fragments was used to examine variations in cyanophage community structure in three inlets in British Columbia, Canada. Qualitative examination of denaturing gradient gels revealed cyanophage community patterns that reflected the physical structure of the water column as indicated by temperature and salinity. Based on mobility of PCR fragments in the DGGE gels, some cyanophages appeared to be widespread, while others were observed only at specific depths. Cyanophage communities within Salmon Inlet were more related to one another than to communities from either Malaspina Inlet or Pendrell Sound. As well, surface communities in Malaspina Inlet and Pendrell Sound were different when compared to communities at depth. In the same two locations, distinct differences in community composition were observed in communities that coincided with depths of high chlorophyll fluorescence. The observed community shifts over small distances (only a few meters in depth or inlets separated by less than 100 km) support the idea that cyanophage communities separated by small spatial scales develop independently of each other as a result isolation by water column stratification or land mass separation, which may ultimately lead to changes in the distribution or composition of the host community.

Defining the ATPase Center of Bacteriophage T4 DNA Packaging Machine: Requirement for a Catalytic Glutamate Residue in the Large Terminase Protein gp17

Double-stranded DNA packaging in icosahedral bacteriophages is driven by an ATPase-coupled packaging machine constituted by the portal protein and two non-structural packaging/terminase proteins assembled at the unique portal vertex of the empty viral capsid. Recent studies show that the N-terminal ATPase site of bacteriophage T4 large terminase protein gp17 is critically required for DNA packaging. It is likely that this is the DNA translocating ATPase that powers directional translocation of DNA into the viral capsid. Defining this ATPase center is therefore fundamentally important to understand the mechanism of ATP-driven DNA translocation in viruses. Using combinatorial mutagenesis and biochemical approaches, we have defined the catalytic carboxylate residue that is required for ATP hydrolysis. Although the original catalytic carboxylate hypothesis suggested the presence of a catalytic glutamate between the Walker A (SRQLGKT 161–167) and Walker B (MIYID 251–255) motifs, none of the four candidate glutamic acid residues, E198, E208, E220 and E227, is required for function. However, the E256 residue that is immediately adjacent to the putative Walker B aspartic acid residue (D255) exhibited a phenotypic pattern that is consistent with the catalytic carboxylate function. None of the amino acid substitutions, including the highly conservative D and Q, was tolerated. Biochemical analyses showed that the purified E256V, D, and Q mutant gp17s exhibited a complete loss of gp16-stimulated ATPase activity and in vitro DNA packaging activity, whereas their ATP binding and DNA cleavage functions remained intact. The data suggest that the E256 mutants are trapped in an ATP-bound conformation and are unable to catalyze the ATP hydrolysis-transduction cycle that powers DNA translocation. Thus, this study for the first time identified and characterized a catalytic glutamate residue that is involved in the energy transduction mechanism of a viral DNA packaging machine.

Herpes simplex virus type 1 portal protein UL6 interacts with the putative terminase subunits UL15 and UL28.

The herpes simplex virus type 1 (HSV-1) UL6, UL15, and UL28 proteins are essential for cleavage of replicated concatemeric viral DNA into unit length genomes and their packaging into a preformed icosahedral capsid known as the procapsid. The capsid-associated UL6 DNA-packaging protein is located at a single vertex and is thought to form the portal through which the genome enters the procapsid. The UL15 protein interacts with the UL28 protein, and both are strong candidates for subunits of the viral terminase, a key component of the molecular motor that drives the DNA into the capsid. To investigate the association of the UL6 protein with the UL15 and UL28 proteins, the three proteins were produced in large amounts in insect cells with the baculovirus expression system. Interactions between UL6 and UL28 and between UL6 and UL15 were identified by an immunoprecipitation assay. These results were confirmed by transiently expressing wild-type and mutant proteins in mammalian cells and monitoring their distribution by immunofluorescence. In cells expressing the single proteins, UL6 and UL15 were concentrated in the nuclei whereas UL28 was found in the cytoplasm. When the UL6 and UL28 proteins were coexpressed, UL28 was redistributed to the nuclei, where it colocalized with UL6. In cells producing either of two cytoplasmic UL6 mutant proteins and a functional epitope-tagged form of UL15, the UL15 protein was concentrated with the mutant UL6 protein in the cytoplasm. These observed interactions of UL6 with UL15 and UL28 are likely to be of major importance in establishing a functional DNA-packaging complex at the portal vertex of the HSV-1 capsid.

The unique vertex of bacterial virus PRD1 is connected to the viral internal membrane.

Icosahedral double-stranded DNA (dsDNA) bacterial viruses are known to package their genomes into preformed procapsids via a unique portal vertex. Bacteriophage PRD1 differs from the more commonly known icosahedral dsDNA phages in that it contains an internal lipid membrane. The packaging of PRD1 is known to proceed via preformed empty capsids. Now, a unique vertex has been shown to exist in PRD1. We show in this study that this unique vertex extends to the virus internal membrane via two integral membrane proteins, P20 and P22. These small membrane proteins are necessary for the binding of the putative packaging ATPase P9, via another capsid protein, P6, to the virus particle.

A Second Symmetry Mismatch at the Portal Vertex of Bacteriophage T7: 8-fold Symmetry in the Procapsid Core

Like other bacteriophages, T7 has a singular vertex that is the site of a symmetry mismatch involving the portal/connector protein, a 12-fold ring at the vertex site which is also a 5-fold axis for the icosahedral capsid. In the mature virion, a 6-fold-symmetric tail extends outwards from the connector. T7 also has a cylindrical “core” that assembles on the inner surface of the connector during procapsid formation, is retained in the mature virion, and is required for infectivity. We have investigated the core structure by cryo-electron microscopy and image analysis of procapsids and find that it observes 8-fold symmetry. Stoichiometry data indicate that its major constituent is an octamer of gp15.

Use of signal-mediated amplification of RNA technology (SMART) to detect marine cyanophage DNA.

Here, we describe the application of an isothermal nucleic acid amplification assay, signal-mediated amplification of RNA technology (SMART), to detect DNA extracted from marine cyanophages known to infect unicellular cyanobacteria from the genus Synechococcus. The SMART assay is based on the target-dependent production of multiple copies of an RNA signal, which is measured by an enzyme-linked oligosorbent assay. SMART was able to detect both synthetic oligonucleotide targets and genomic cyanophage DNA using probes designed against the portal vertex gene (g20). Specific signals were obtained for each cyanophage strain (S-PM2 and S-BnMI). Nonspecific genomic DNA did not produce false signals or inhibit the detection of a specific target. In addition, we found that extensive purification of target DNA may not be required since signals were obtained from crude cyanophage lysates. This is the first report of the SMART assay being used to discriminate between two similar target sequences.

Structural organisation of the head-to-tail interface of a bacterial virus

In tailed icosahedral bacteriophages the connection between the 5-fold symmetric environment of the portal vertex in the capsid and the 6-fold symmetric phage tail is formed by a complex interface structure. The current study provides the detailed analysis of the assembly and structural organisation of such an interface within a phage having a long tail. The region of the interface assembled as part of the viral capsid (connector) was purified from DNA-filled capsids of the Bacillus subtilis bacteriophage SPP1. It is composed of oligomers of gp6, the SPP1 portal protein, of gp15, and of gp16. The SPP1 connector structure is formed by a mushroom-like portal protein whose cap faces the interior of the viral capsid in intact virions, an annular structure below the stem of the mushroom, and a second narrower annulus that is in direct contact with the helical tail extremity. The layered arrangement correlates to the stacking of gp6, gp15, and gp16 on top of the tail. The gp16 ring is exposed to the virion outside. During SPP1 morphogenesis, gp6 participates in the procapsid assembly reaction, an early step in the assembly pathway, while gp15 and gp16 bind to the capsid portal vertex after viral chromosome encapsidation. gp16 is processed during or after tail attachment to the connector region. The portal protein gp6 has 12-fold cyclical symmetry in the connector structure, whereas assembly-naı̈ve gp6 exhibits 13-fold symmetry. We propose that it is the interaction of gp6 with other viral morphogenetic proteins that drives its assembly into the 12-mer state.

Structural Transformations Accompanying the Assembly of Bacteriophage P22 Portal Protein Rings in Vitro

The Salmonella typhimurium bacteriophage P22 assembles an icosahedral capsid precursor called a procapsid. The oligomeric portal protein ring, located at one vertex, comprises the conduit for DNA entry and exit. In conjunction with the DNA packaging enzymes, the portal ring is an integral component of a nanoscale machine that pumps DNA into the phage head. Although the portal vertex is assembled with high fidelity, the mechanism by which a single portal complex is incorporated during procapsid assembly remains unknown. The assembly of bacteriophage P22 portal rings has been characterized in vitro using a recombinant, His-tagged protein. Although the portal protein remained primarily unassembled within the cell, once purified, the highly soluble monomer assembled into rings at room temperature at high concentrations with a half time of approximately 1 h. Circular dichroic analysis of the monomers and rings indicated that the protein gained alpha-helicity upon polymerization. Thermal denaturation studies suggested that the rings contained an ordered domain that was not present in the unassembled monomer. A combination of 4,4'-dianilino-1,1'-binapthyl-5,5'-disulfonic acid (bis-ANS) binding fluorescence studies and limited proteolysis revealed that the N-terminal portion of the unassembled subunit is meta-stable and is susceptible to structural perturbation by bis-ANS. In conjunction with previously obtained data on the behavior of the P22 portal protein, we propose an assembly model for P22 portal rings that involves a meta-stable monomeric subunit.

Biochemical Characterization of an ATPase Activity Associated with the Large Packaging Subunit gp17 from Bacteriophage T4

Double-stranded DNA-packaging in icosahedral bacteriophages is believed to be driven by a packaging "machine" constituted by the portal protein and the two packaging/terminase proteins assembled at the unique portal vertex of the empty prohead shell. Although ATP hydrolysis is evidently the principal driving force, which component of the packaging machinery functions as the translocating ATPase has not been elucidated. Evidence suggests that the large packaging subunit is a strong candidate for the translocating ATPase. We have constructed new phage T4 terminase recombinants under the control of phage T7 promoter and overexpressed the packaging/terminase proteins gp16 and gp17 in various configurations. The hexahistidine-tagged-packaging proteins were purified to near homogeneity by Ni(2+)-agarose chromatography and were shown to be highly active for packaging DNA in vitro. The large packaging subunit gp17 but not the small subunit gp16 exhibited an ATPase activity. Although gp16 lacked ATPase activity, it enhanced the gp17-associated ATPase activity by >50-fold. The gp16 enhancement was specific and was due to an increased catalytic rate for ATP hydrolysis. A phosphorylated gp17 was demonstrated under conditions of low catalytic rates but not under high catalytic rates in the presence of gp16. The data are consistent with the hypothesis that a weak ATPase is transformed into a translocating ATPase of high catalytic capacity after assembly of the packaging machine.

Topology of the components of the DNA packaging machinery in the phage φ29 prohead

Chromosome condensation inside dsDNA viral particles is a complex process requiring the coordinated action of several viral components. The similarity of the process in different viral systems has led to the suggestion that there is a common underlying mechanism for DNA packaging, in which the portal vertex or connector plays a key role. We have studied the topology of the packaging machinery using a number of antibodies directed against different domains of the connector. The charged amino-terminal, the carboxyl-terminal, and the RNA binding domain are accessible areas in the connector assembled into the prohead, while the domains corresponding to the 12 large appendages of the connector are buried inside the prohead. Furthermore, while the antibodies against the carboxyl and amino-terminal do not affect the packaging reaction, incubation of proheads with antibodies against the RNA binding domain abolishes the packaging activity. The comparison of the three-dimensional reconstructions of bacteriophage φ29 proheads with proheads devoid of their specific pRNA by RNase treatment shows that this treatment removes structural elements of the distal vertex of the portal structure, suggesting that the pRNA required for packaging is located at the open gate of the channel in the narrow side of the connector.

In vitroPackaging of DNA of the Bacillus subtilis bacteriophage SPP1

In vitro packaging of bacteriophage SPP1 DNA into procapsids is described and the requirements of this process were determined. Combination of proheads with an extract supplying terminase, DNA and phage tails yielded up to 107 viable phages per milliliter of in vitro reaction under optimized conditions. The presence of neutral polymers and polyamines had a concentration and type dependent effect in the packaging reaction. The terminase donor extract lost rapidly activity at 30°C in contrast to the stability of the prohead donor extract. Maturation to infective virions was observed using both procapsids assembled in SPP1 infected cells and procapsid-like structures assembled in Escherichia coli that overexpressed the SPP1 prohead gene clusters. Neither a majority of aberrant capsid-related structures present in the latter material nor procapsids lacking the portal protein inhibited DNA packaging. Addition of purified portal protein reduced DNA packaging activity in vitro only at concentrations 20-fold higher than those found in the SPP1 infected cell. The SPP1 DNA packaged in vitro originated exclusively from the terminase donor extract. This packaging selectivity was not observed in vivo during mixed infections. The data are compatible with a model for processive headful DNA packaging in which terminase and DNA co-produced in the same cell are tightly associated and can effectively discriminate the portal vertex of DNA packaging-proficient proheads from aberrant structures, from portal-less procapsids, and from isolated portal protein.