Porous Metal-organic Frameworks Research Articles

Designing Impact Resistance and Robustness into Slippery Lubricant Infused Porous Surfaces.

Slippery lubricant infused porous surfaces (SLIPS) have the potential to address daunting challenges such as undesirable surface fouling/biofouling, icing, etc. However, the depletion of lubricants hampers their practical utility. As a solution, here a rational strategy is introduced that operates synergistically in three parts. First, ultra-high capillary pressure is exploited from the reticular structure of metal-organic frameworks (MOFs) with sub-nanometer pores. Second, the need for geometric compatibility is demonstrated; the lubricant chain diameter must be smaller than the MOF pore to enable lubricant chain intercalation. Lastly, the MOF pore chemistry is tailored to achieve a strong intermolecular interaction for any given MOF/lubricant combination. The strategy is investigated through experiments and quantum/molecular simulations, which show that the approach helps lock the intercalated lubricant chains inside the MOF pores and forms a non-conventional supramolecular structure. The resulting SLIPS (including those with fluorine-free chemistry) not only show typical low wetting hysteresis, friction, and ice adhesion but are uniquely resistant to more stringent tests such as continuous dripping and sliding of water droplets (up to 50hrs), repeated impacts of high-speed water jets (liquid impact Weber number >4×104) and prevent bacterial biofilm formation even in dynamic flow conditions. The findings may widen the practical applications of SLIPS.

Selective Monoborylation of Methane by a Mono Bipyridyl‐Nickel(II) Hydride Catalyst

We report the development of an earth‐abundant metal catalyst for methane C‒H borylation. The post‐synthetic metalation of bipyridine‐functionalized zirconium metal−organic framework (MOF) with NiBr2, followed by treatment of NaEt3BH affords MOF‐supported monomeric bipyridyl‐nickel(II) dihydride species via active site isolation. The heterogeneous and recyclable nickel catalyst selectively borylates methane at 200 ºC using pinacolborane (HBpin) to afford CH3Bpin in 61% yield with a turnover number (TON) up to 1388. The confinement of the active NiH2‐species within the uniformly porous MOF allows selective monoborylation of methane via shape‐selective catalysis by preventing the formation of sterically encumbered overborylated products. Unlike MOF‐Ni catalyst, its homogeneous control is almost inactive in methane borylation due to its intermolecular decomposition. Our mechanistic investigation, including spectroscopic, kinetic, and control experiments, as well as DFT calculations, revealed that stabilizing mononuclear bipyridyl‐nickel dihydride and diboryl species by MOF is crucial for achieving efficient methane borylation via turnover‐limiting σ‐bond metathesis. This work shows promise in designing MOF‐based abundant metal catalysts for the chemoselective functionalization of methane and other inert molecules into valuable chemicals.

Selective Monoborylation of Methane by a Mono Bipyridyl-Nickel(II)Hydride Catalyst.

We report the development of an earth-abundant metal catalyst for methane C‒H borylation. The post-synthetic metalation of bipyridine-functionalized zirconium metal-organic framework (MOF) with NiBr2, followed by treatment of NaEt3BH affords MOF-supported monomeric bipyridyl-nickel(II) dihydride species via active site isolation. The heterogeneous and recyclable nickel catalyst selectively borylates methane at 200 ºC using pinacolborane (HBpin) to afford CH3Bpin in 61% yield with a turnover number (TON) up to 1388. The confinement of the active NiH2-species within the uniformly porous MOF allows selective monoborylation of methane via shape-selective catalysis by preventing the formation of sterically encumbered overborylated products. Unlike MOF-Ni catalyst, its homogeneous control is almost inactive in methane borylation due to its intermolecular decomposition. Our mechanistic investigation, including spectroscopic, kinetic, and control experiments, as well as DFT calculations, revealed that stabilizing mononuclear bipyridyl-nickel dihydride and diboryl species by MOF is crucial for achieving efficient methane borylation via turnover-limiting σ-bond metathesis. This work shows promise in designing MOF-based abundant metal catalysts for the chemoselective functionalization of methane and other inert molecules into valuable chemicals.

Boronate affinity metal–organic frameworks molecularly imprinted membranes with hierarchical porous channels for the selective separation of naringin

Naringin (NRG), known as an important natural flavoniod compounds, exhibits excellent phamaceutical value and clinical application prospect. However, the main obstacle to the isolation and purification of NRG is the low concentration and complexity of the extraction system. Herein, a new kind of hierarchical porous metal–organic frameworks (MOFs) based molecularly imprinted membranes (PBMMA-MIMs) for the specific separation of NRG. The prepared PBMMA-MIMs showed the fast adsorption kinetics (within 120 min). Moreover, the abundant boronic acid imprinted recognition sits and hydrophilic hierarchical porous MOFs improved the adsorption capacity (the maximum adsorption amounts 57.39 μmol/g) and exhibited selective NRG adsorption (imprinting factor 2.31) with efficiency over 91.69 % after seven adsorption–desorption cycles. In addition, the coarse NRG could be effectively extracted to a promising purity of 93.13 % via PBMMA-MIMs. This study provides new insights into the design molecularly imprinted membranes via environmentally friendly synthesis route for the preparation for enriching high-value flavoniods, achieving efficient purification rate of agricultural wastes for pollution control, and promoting the sustainable reuse in complex agricultural wastewater.

High-Efficiency Enzyme Assay and Screening of Enzyme-Inhibiting Nanomaterials Using Capillary Electrophoresis with Hierarchically Porous Metal-Organic Framework-Based Immobilized Enzyme Microreactor.

Enzyme-inhibiting nanomaterials have significant potential for regulating enzyme activity. However, a universal and efficient method for systematically screening and evaluating the inhibitory effects of various nanomaterials on drug target enzymes has not been established. While the integrated technique of immobilized enzyme microreactor (IMER) with capillary electrophoresis (CE) serves as an effective tool for enzyme analysis, it still faces challenges such as low enzyme loadability, unsatisfactory stability, and limited applicability. Herein, hierarchical porous metal-organic frameworks (HP-MOFs) were explored as high-performance enzyme immobilization carriers and stationary phases to develop a novel HP-MOFs-based IMER-CE microanalysis system for efficient online enzyme assay and systematic screening of enzyme-inhibiting nanomaterials. As a proof-of-concept demonstration, the model enzyme xanthine oxidase (XOD) was immobilized on a HP-UiO-66-NH2 coated capillary, serving as an efficient and durable IMER for screening potential XOD-inhibiting nanomaterials. The hierarchically micro- and mesoporous structure and superior enzyme loadability of as-prepared HP-UiO-66-NH2-IMER was intensively characterized, followed by systematic evaluation of the separation performance of HP-UiO-66-NH2 coated column and the enzyme kinetics of the immobilized XOD. Compared to the microporous UiO-66-NH2-IMER, the HP-UiO-66-NH2-IMER-CE system showed significant improvements in enzyme loading, maximum reaction rate, repeatability, and long-term stability. Furthermore, the established method was effectively employed to screen the XOD inhibitory activity of various nanomaterials, revealing that graphene oxide, single wall carbon nanotube and three other nanomaterials exhibited inhibitory potentials. The HP-MOFs-based microanalysis system can be easily expanded by modifying the types of immobilized enzymes and holds the potential to accelerate the identification and rational design of effective enzyme-inhibiting nanomaterials.

Novel Electrochemical Sensor Based on One-Step Encapsulation of Metal-Organic Framework (MOF) for Simultaneous Detection of SARS-CoV and SARS-CoV-2.

This study investigates three metal-organic frameworks (MOFs) with distinct Brunauer-Emmett-Teller (BET) surface areas and pore sizes: MOFZr (1274 m2/g, <0.7 nm), MOFAl (371 m2/g, 1.5 nm), and MOFCr (1917 m2/g, 2 nm). Methylene blue (MB, 1.4 × 0.7 × 0.2 nm3) and triferrocene (tri-FC, 1.2 × 0.9 × 0.3 nm3) were adsorbed onto these MOFs. Specific DNA segments targeting SARS-CoV-2 (PR and PO) were employed to block the pores of the MOFs, leading to the formation of DNA-gated MOFs: MOFX/MB/PR and MOFX/tri-FC/PO. These constructs were subsequently integrated with four-arm poly(ethylene glycol) amine (4-arm-PEG-NH2)-modified gold electrodes to create the corresponding sensors (MOFX/MB/PR+MOFX/tri-FC/PO@4-arm-PEG-NH2@Au NPs@GCE). The DNA-gated MOFAl system exhibited the highest loading capacity and a 3-fold increase in sensing efficiency following the introduction of SARS-CoV-2 target DNA, surpassing the performance of the other systems. This study highlights the enhancement of the DNA-gated MOFs when the three-dimensional structures of the guest molecules closely align with the pore sizes of the MOFs. It emphasizes a critical aspect of the traditional design approach for electrochemical sensors based on MOF encapsulation, which often prioritizes BET surface areas while neglecting the compatibility between the sizes of guest molecules and MOF pore diameters. Moreover, the sensor effectively discriminated between SARS-CoV-2 and SARS-CoV by precisely aligning the SARS-CoV-2 target DNA with PR and PO. In contrast, the specific genetic targets (SR) from SARS-CoV showed complete mismatches with PO and a three-base deviation with PR. This differentiation was achieved in a simple one-step assay, even in 5% serum, across a linear concentration range of 10-9 to 10-14 M. This range signifies an expansion of 2 to 3 orders of magnitude compared to sensors that inaccurately selected MOFs.

Conversion of Carbon Dioxide into Molecular-based Porous Frameworks.

ConspectusThe conversion of carbon dioxide (CO2) to value-added functional materials is a major challenge in realizing a carbon-neutral society. Although CO2 is an attractive renewable carbon resource with high natural abundance, its chemical inertness has made the conversion of CO2 into materials with the desired structures and functionality difficult. Molecular-based porous materials, such as metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs), are designable porous solids constructed from molecular-based building units. While MOF/COFs attract wide attention as functional porous materials, the synthetic methods to convert CO2 into MOF/COFs have been unexplored due to the lack of synthetic guidelines for converting CO2 into molecular-based building units.In this Account, we describe state-of-the-art studies on the conversion of CO2 into MOF/COFs. First, we outline the key design principles of CO2-derived molecular building units for the construction of porous structures. The appropriate design of reactivity and the positioning of bridging sites in CO2-derived molecular building units is essential for constructing CO2-derived MOF/COFs with desired structures and properties. The synthesis of CO2-derived MOF/COFs involves both the transformation of CO2 into building units and the formation of extended structures of the MOF/COFs. We categorized the synthetic methods into three types as follows: a one-step synthesis (Type-I); a one-pot synthesis without workup (Type-II); and a multistep synthesis which needs workup (Type-III).We demonstrate that borohydride can convert CO2 into formate and formylhydroborate that serve as a bridging linker for MOFs in the Type-I and Type-II synthesis, representing the first examples of CO2-derived MOFs. The electronegativity of coexisting metal ions determines the selective conversion of CO2 into formate and formylhydroborate. Formylhydroborate-based MOFs exhibit flexible pore sizes controlled by the pressure of CO2 during synthesis. In pursuit of highly porous structures, we present the Type-I synthesis of MOFs from CO2 via the in situ transformation of CO2 into carbamate linkers by amines. The direct conversion of diluted CO2 (400 ppm) in air into carbamate-based MOFs is also feasible. Coordination interactions stabilize the intrinsically labile carbamate in the MOF lattice. A recent study demonstrates that the Type-III synthesis using alkynylsilane precursors enables the synthesis of highly porous and stable carboxylate-based MOFs from CO2, which exhibit catalytic activity in CO2 conversion. We also extended the synthesis of MOFs from CO2 to COFs. The Type-III synthesis using a formamide monomer affords stable CO2-derived COFs showing proton conduction properties. The precise design of CO2-derived building units enables expansion of the structures and functionalities of CO2-derived MOF/COFs. Finally, we propose future challenges in this field: (i) expanding structural diversity through synthesis using external fields and (ii) exploring unique functionalities of CO2-derived MOF/COFs, such as carriers for CO2 capture and precursors for CO2 transformation. We anticipate that this Account will lay the foundation for exploring new chemistry of the conversion of CO2 into porous materials.

Anisotropic porosity and interface synergy enhanced gas permselectivity in heterolayer metal-organic framework membrane.

The pursuit of sustainable, carbon-free separation technology hinges on the efficient separation of gas mixtures with high separation factors and flow rates, i.e. high permselectivity. However, achieving this objective is arduous due to the meticulous engineering at the angstrom scale and intricate chemical manipulation required to design the pores within membranes. To address this challenge, a proof-of-concept for an anisotropic porous membrane has been devised. Employing a meticulous step-by-step methodology, two distinct porous metal-organic frameworks (MOFs) are integrated to form a monolithic anisotropic membrane. By harnessing pore anisotropy (3.4 to 6 Å) aligned with the gas permeation direction and a unique interface characterized by cross-linked pores derived from the two distinct MOFs, this membrane transcends the performance limitations inherent in the individual MOF membranes (~45% enhanced selectivity). This approach not only sheds light on the heterolayer membrane design strategy but also elucidates the intricate CO2/N2 permselectivity relationship inherent in the interface structure.

Porous Metal Phosphonate Frameworks: Construction and Physical Properties.

ConspectusPorous metal phosphonate frameworks (PMPFs) as a subclass of metal-organic frameworks (MOFs) have promising applications in the fields of gas adsorption and separation, ion exchange and storage, catalysis, sensing, etc. Compared to the typical carboxylate-based MOFs, PMPFs exhibit higher thermal and water stability due to the strong coordination ability of the phosphonate ligands. Despite their robust frameworks, PMPFs account for less than 0.51% of the porous MOFs reported so far. This is because metal phosphonates are highly susceptible to the formation of dense layered or pillared-layered structures, and they precipitate easily and are difficult to crystallize. There is a tendency to use phosphonate ligands containing multiple phosphonate groups and large organic spacers to prevent the formation of dense structures and generate open frameworks with permanent porosity. Thus, many PMPFs are composed of chains or clusters of inorganic metal phosphonates interconnected by organic spacers. Using this feature, a wide range of metal ions and organic components can be selected, and their physical properties can be modulated. However, limited by the small number of PMPFs, there are still relatively few studies on the physical properties of PMPFs, some of which merely remain in the description of the phenomena and lack in-depth elaboration of the structure-property relationship. In this Account, we review the strategies for constructing PMPFs and their physical properties, primarily based on our own research. The construction strategies are categorized according to the number (n = 1-4) of phosphonate groups in the ligand. The physical properties include proton conduction, electrical conduction, magnetism, and photoluminescence properties. Proton conductivity of PMPFs can be enhanced by increasing the proton carrier concentration and mobility. The former can be achieved by adding acidic groups such as -POH and/or introducing acidic guests in the hydrophilic channels. The latter can be attained by introducing conjugate acid-base pairs or elevating the temperature. Semiconducting PMPFs, on the other hand, can be obtained by constructing highly conjugated networks of coordination bonds or introducing large conjugated organic linkers π-π stacked in the lattice. In the case of magnetic PMPFs, long-range magnetic ordering occurs at very low temperatures due to very weak magnetic exchange couplings propagated via O-P-O and/or O(P) units. However, lanthanide compounds may be interesting candidates for single-molecule magnets because of the strong single-ion magnetic anisotropy arising from the spin-orbit coupling and large magnetic moments of lanthanide ions. The luminescent properties of PMPFs depend on the metal ions and/or organic ligands. Emissive PMPFs containing lanthanides and/or uranyl ions are promising for sensing and photonic applications. We conclude with an outlook on the opportunities and challenges for the future development of this promising field.

Ultrastable hierarchically porous nucleotide-based MOFs and their use for enzyme immobilization and catalysis

Immobilization of free enzymes facilitates their recovery and reuse, while also enhances their enzymatic characteristics. Hierarchically porous metal-organic frameworks (HP-MOFs) are promising candidates for enzyme immobilization. However, fabrication of HP-MOFs with more kinds of components as ligands is still a challenge. Herein, ultrastable crystalline MOFs with micro-, meso- and macroporous structure were constructed using guanosine 5′-monophosphate (GMP) as organic ligand through templated emulsification method. HP-MOFs crystals with the near rhomb-like, rod-like and slab-like morphology were interestingly obtained from Zn2+, Cu2+ and Cd2+ respectively. The HP-MOFs immobilized enzymes exhibited an enhanced enzymatic activity and stability. In addition, the immobilized CALB (Candida antarctica lipase B) showed great glycerolysis and esterification performances for glycerides preparation, with diacylglycerols (DAG) content over 60 wt% and triacylglycerols (TAG) content over 90 wt% obtained respectively from glycerolysis and esterification. Moreover, it retained 82.32 % of its initial glycerolysis activity after six cycles of reuse in glycerolysis. The present study will provide clues and show new horizons to explore new organic ligands for HP-MOFs fabrication, as well as to expand the applications of HP-MOFs and their supported enzymes.

Reaction-assisted MOF manipulation for synthesis of UIO-66-NHCHO topology for prodrug fabrication: pH-responsive targeted drug delivery

A pH-responsive metal-organic framework (MOF)-based prodrug was synthesized via a premeditated formic acid-assisted amide reaction to form the UiO-66-NHCHO topology from UiO-66-NH2. This topology can be covalently attached to the methotrexate drug (MTX) to form theUiO-66-NH-HCN-MTX prodrug. The pristine MOF, UiO-66-NHCHO, and prodrug were characterized using PXRD, FT-IR, FE-SEM, BET, TGA, and NMR analyses. The solid-state NMR and FT-IR confirmed UiO-66-NHCHO topology.The loading efficiency and capacity of the prodrug were 88.96 % and 100.07 mg/g, respectively. These values were 12.90 % and 13.25 mg/g higher than those of the MTX-loaded MOF. This confirms the role of bonding in prodrug synthesis, beyond merely loading MTX through drug adsorption. At low pH the applied prodrug was activated due to CN cleavage. By decreasing pH from 7.4 to 5.5, imitating a tumor environment, the cumulative release of MTX increased by 64.94 %. This release rate was reached by 550 min, which was 230 min longer than the maximum MTX release from the loaded MOF. Such a premeditated delay can effectively suppress the burst release of MTX. At both pH levels, the Higuchi release kinetic model fit the release data better than other models, demonstrating that diffusion through the MOF pores controls drug delivery.

Highly plasticization-resistant Tröger’s base polymer–MOF mixed-matrix membranes for stable gas separation

The plasticization phenomenon, characterized by polymer chain swelling when exposed to highly soluble gas at high feed pressure, has been a major problem for polymer membranes. To address this, we prepared Tröger’s base (TB) polymer-based metal–organic framework (MOF) mixed-matrix membranes (MMMs), which are highly plasticization-resistant membranes. Three different highly porous MOF nanoparticles (ZIF-8, UiO-66-NH2, and MIL-101(Cr)) were prepared in small particle sizes. The corresponding MMMs were formed with a 30 wt% MOF loading to study the effects of MOF species, particle size, chemical functionality, and MOF–polymer interfacial interaction on gas-transport properties and plasticization behavior. The TB polymer-based MOF MMMs exhibited significantly higher H2 and CO2 permeabilities (fourfold to eightfold) than the TB polymer membrane owing to the porous nature and high gas adsorption capacity of the MOF. Additionally, the TB-based MOF MMMs, particularly the UiO-66-NH2 MMM, displayed exceptional CO2 plasticization resistance. This is attributed to the interfacial interaction of the strong hydrogen bonding between the amine group of the TB polymer and the amino group of UiO-66-NH2, as confirmed by small-angle X-ray scattering characterization. This TB polymer-based MOF MMM approach provides a feasible and effective route for enhancing gas-transport properties and CO2 plasticization resistance to achieve energy-efficient and stable gas separation.

The Central Role of Oxo Clusters in Zirconium‐Based Esterification Catalysis

Oxo clusters are a unique link between oxide nanocrystals and Metal‐Organic Frameworks (MOFs), representing the limit of downscaling each of the respective crystals. Herein, the superior catalytic activity of clusters, compared to zirconium MOF UiO‐66 and nanocrystals is shown. Focus is on esterification reactions given their general importance in consumer products and the challenge of converting large substrates. Oxo clusters have a higher surface‐to‐volume ratio than nanocrystals, rendering them more active. For large substrates, for example, oleic acid, MOF UiO‐66 has negligible catalytic activity while clusters provide almost quantitative conversion, a fact we ascribe to limited diffusion of large substrates through the MOF pores. Clusters do not suffer from limited mass transfer and we also obtain high conversion in solvent‐free reactions with sterically hindered alcohols (hexanol, 2‐ethyl hexanol, benzyl alcohol, and neopentyl alcohol). The cluster catalyst can be recovered and shows identical activity when reused. The structural integrity of the cluster is confirmed using X‐ray total scattering and pair distribution function analysis. Moreover, when homogeneous zirconium alkoxides are used as catalysts, the same oxo cluster is retrieved, showing that oxo clusters are the active catalytic species, even in previously assumed homogeneously catalyzed reactions.

Synergistic effect of Gemcitabin-loaded metal organic frameworks nanoparticles with particle therapy

Combination of nanoagents with radiations has opened up new perspectives in cancer treatment, improving both tumor diagnosis and therapeutic index. This work presents the first investigation of an innovative strategy that combines porous metal–organic frameworks (nanoMOFs) loaded with the anti-cancer drug Gemcitabine monophosphate (GemMP) and particle therapy-a globally emerging technique that offers more precise radiation targeting and enhanced biological efficacy compared to conventional radiotherapy. This radiochemotherapy has been confronted with two major obstacles limiting the efficacy of therapeutics when tested in vivo: (i) the presence of hypoxia, one of the most important causes for radiotherapy failure and (ii) the presence of a microenvironment, main biological barrier to the direct penetration of nanoparticles into cancer cells.On the one hand, this study explore the effects of hypoxia on drug delivery systems in combination with radiation, demonstrating that GemMP-loaded nanoMOFs significantly enhance the anticancer efficacy of particle therapy under both normoxic (pO2 = 20 %) and hypoxic (pO2 = 0.5 %) conditions. Notably, the presence of GemMP-loaded nanoMOFs allows the irradiation dose to be reduced by 1.4-fold in normoxia and at least 1.6-fold in hypoxia, achieving the same cytotoxic effect (SF=10 %) as carbon or helium ions alone. Synergistic effects between GemMP-loaded nanoMOFs and radiations have been observed and quantified. On the other hand, we also highlighted the ability of the nanoMOFs to diffuse through an extracellular matrix and accumulate in cells. An higher effect of the encapsulated GemMP than the free drug was observed, confirming the key role of the nanoMOFs in transporting the active substance to the cancer cells as a Trojan horse. This paves the way to the design of “all-in-one” nanodrugs where each component plays a role in the optimization of cancer therapy to maximize cytotoxic effects on hypoxic tumor cells while minimizing toxicity on healthy tissue.

Aromatic pore engineering in microporous metal–organic frameworks for high-production one-step methane purification from ternary alkanes mixtures

The exploitation of competent isolation and purification technology of methane (CH4) is an imperative and challenging task for full utilization of clean natural gas in petrochemical industry. Compared to traditional energy-intensive low-temperature distillation, adsorptive separation using porous metal–organic framework (MOF) materials provides an alternative technique with low energy consumption and high efficiency. In this situation, an aromatic pore engineering strategy in a series of pillar-layered Zn-based MOFs by introducing organic linkers with different degrees of aromatic units was investigated to tune pore size and pore environment for simultaneously removing propane (C3H8) and ethane (C2H6) from C3H8/C2H6/CH4 mixtures. Compared to the other two analogues, i.e. Zn(BDC)(TED)0.5 and Zn(ADC)(TED)0.5, obtained Zn(NDC)(TED)0.5 showed high adsorption capacity for C3H8 (5.18 mmol/g) and C2H6 (5.04 mmol/g) and selectivity for C3H8/CH4 and C2H6/CH4 at 298 K and 1.0 bar. Breakthrough tests proved the three MOFs can effectively separate ternary C3H8/C2H6/CH4 mixtures, and Zn(NDC)(TED)0.5 especially exhibited excellent high-purity CH4 yield of 10.07 mmol/g. Computational simulations showed that suitable pore space and surface aromatic environment in Zn(NDC)(TED)0.5 created beneficial interactions with C3H8 and C2H6 molecules, which ultimately contributed to its favourable adsorption and separation property. This system work provides insights for the development of pore control method in MOF materials for natural gas purification.

Preparation of NH2-MIL-101(Fe) Metal Organic Framework and Its Performance in Adsorbing and Removing Tetracycline.

Tetracycline's accumulation in the environment poses threats to human health and the ecological balance, necessitating efficient and rapid removal methods. Novel porous metal-organic framework (MOF) materials have garnered significant attention in academia due to their distinctive characteristics. This paper focuses on studying the adsorption and removal performance of amino-modified MIL-101(Fe) materials towards tetracycline, along with their adsorption mechanisms. The main research objectives and conclusions are as follows: (1) NH2-MIL-101(Fe) MOF materials were successfully synthesized via the solvothermal method, confirmed through various characterization techniques including XRD, FT-IR, SEM, EDS, XPS, BET, and TGA. (2) NH2-MIL-101(Fe) exhibited a 40% enhancement in tetracycline adsorption performance compared to MIL-101(Fe), primarily through chemical adsorption following pseudo-second-order kinetics. The adsorption process conformed well to Freundlich isotherm models, indicating multilayer and heterogeneous adsorption characteristics. Thermodynamic analysis revealed the adsorption process as a spontaneous endothermic reaction. (3) An increased adsorbent dosage and temperature correspondingly improved NH2-MIL-101(Fe)'s adsorption efficiency, with optimal performance observed under neutral pH conditions. These findings provide new strategies for the effective removal of tetracycline from the environment, thus holding significant implications for environmental protection.

Multimaterial Digital-Light Processing of Metal-Organic Framework (MOF) Composites: A Versatile Tool for the Rapid Microfabrication of MOF-Based Devices.

Patterning Metal-Organic Frameworks (MOFs) is essential for their use in sensing, electronics, photonics, and encryption technologies. However, current lithography methods are limited in their ability to pattern more than two MOFs, hindering the potential for creating advanced multifunctional surfaces. Additionally, balancing design flexibility, simplicity, and cost often results in compromises. This study addresses these challenges by combining Digital-Light Processing (DLP) with a capillary-assisted stop-flow system to enable multimaterial MOF patterning. It demonstrates the desktop fabrication of multiplexed arbitrary micropatterns across cm-scale areas while preserving the MOF's pore accessibility. The ink, consisting of a MOF crystal suspension in a low volatile solvent, a mixture of high molecular weight oligomers, and a photoinitiator, is confined by capillarity in the DLP projection area and quickly exchanged using syringe pumps. The versatility of this method is demonstrated by the direct printing of a ZIF-8-based luminescent oxygen sensor, a 5-component dynamic information concealment method, and a PCN-224-based colorimetric sensor for amines, covering disparate pore and analyte sizes. The multi-MOF capabilities, simplicity, and accessibility of this strategy pave the way for the facile exploration of MOF materials across a wide range of applications, with the potential to significantly accelerate the design-to-application cycle of MOF-based devices.

Synergistic ionic liquid encapsulated MIL-101 (Cr) metal-organic frameworks for an innovative adsorption desalination system

The transformations of brackish water into freshwater employing porous materials such as metal-organic frameworks (MOFs) show a great potential for a green environment. But the adsorption-based desalination slows down due to slow water adsorption/desorption rates and inadequate water storage capacity in conventional adsorbents. Therefore, the restructuring of porous MOFs increases water storage and transfer rates. This paper presents a comprehensive investigation on the fabrication of ionic liquid encapsulated MIL-101 (Cr) MOFs (metal-organic frameworks), and its interactions with water for desalination applications. Firstly, the pristine MIL-101 (Cr) is encapsulated with various types/amounts of ionic liquids. Next, these MOFs are characterized via SEM (Scanning electron microscope), FTIR (Fourier transform infrared), XRD (X-ray diffraction), TGA (Thermal gravimetric analysis), N2 adsorption techniques. The water adsorption on these MOFs is performed experimentally for a wide temperature (30–80 °C) and pressure (0 < P/Ps < 0.95) ranges. The effects of the size (or type) as well as the encapsulation ratio of ionic liquids on water adsorption behaviors are conducted. Based on the experimentally proven water adsorption (isotherms and kinetics) data, an AD (adsorption desalination) system is modelled and simulated. Finally, the AD performances in terms of the specific daily water production (SDWP) and performance ratio (PR) are parametrically studied with respect to various regeneration temperature (50–80 °C) and cycle times (100 s–1000 s). It is found that by ionic liquid encapsulation, the water uptakes/offtake rates are expedited up to 48% (for adsorption)/55% (for desorption), respectively. In addition, the water transfer (Δq) improves up to 45% more than the parent MIL-101(Cr) MOFs. Furthermore, the SDWP increases from 38 to 56 m3 of water per tonne of MOFs per day at the regeneration temperature of 70 °C. The simulation results also show that the ionic-liquid-encapsulated MIL-101 (Cr) MOFs generates water (>25 m3 water per tonne of IL-MOFs) at the regeneration temperature of 50 °C and is potential for the next generation desalination applications.

An Ultramicroporous Zinc‐Based Zeolitic Imidazolate Framework‐8 for the Adsorption of CO2, CH4, CO, N2 and H2: A Combined Experimental and Theoretical Study

AbstractAn alternative synthesis route to obtain ultramicroporous zeolitic imidazolate framework‐8 (ZIF‐8) is reported that is rapid and does not require organic solvent or heating. The polyethylene glycol‐templated ZIF‐8 nanoparticles (&lt;50 nm size) exhibited a high BET (Brunauer, Emmett and Teller) surface area of 1853 m2/g, a total pore volume of 0.73 cm3/g, and 0.54 nm ultramicropores. A new approach is introduced here to better understand gas adsorption in porous metal organic frameworks (MOFs) that combines theoretical and experimental isotherm data obtained for five gases with statistical physics modelling. The multiscale analytical model reveals that the gas molecules, irrespective of their structure, adsorb in a mixed orientation at low temperature, and a parallel multi‐molecular orientation at higher temperature. The number of gas molecules adsorbed per site ranged from 0.83–2.2 while the number of adsorbent layers ranged between 1.4–5.6, depending on the gas and the temperature. The multilayer adsorption processes involved adsorption energies from 2.85 kJ/mol–9.77 kJ/mol for all gases, consistent with physisorption via van der Waals and London dispersion forces. The initial adsorption energies were higher and therefore stronger. A particularly high capacity for CO2 of 1088 mg(CO2)/g at 298 K was observed while H2 adsorption was only 9 mg(H2)/g. The other gases adsorbed at 145 mg/g–245 mg/g at 298 K. Thermodynamic functions that governed the adsorption process such as the internal energy, the enthalpy, and Gibbs free energy, are also reported, as well as the adsorption entropies, for the 5 gases.

Eco-friendly and cost-effective synthesis of hierarchical porous HKUST-1 from thin waste electric cables for enhanced cationic dye removal

HKUST-1, as a type of metal-organic framework (MOF), has attracted significant interest for various applications. However, its use for adsorption applications is hindered by its microporous structure, which negatively impacts the diffusion and mass transfer of large particles (> 2 nm). Concurrently, waste electric cables from discarded vehicles and electronic equipment pose significant environmental challenges. To address these issues, we developed a novel recycling method using copper hydroxide recovered from waste-thin electric cables as the metal source for synthesizing hierarchical porous HKUST-1 (W) using a green approach at a low temperature. The resulting HKUST-1 (W) exhibited interesting properties compared to the typical HKUST-1 (C) synthesized from commercial precursors, showing a microporous-mesoporous structure with enhanced molecular mass transport, while HKUST-1 (C) exhibited only micropores. Moreover, the waste-derived HKUST-1 (W) formed interconnected small particles with enhanced methylene blue (MB) removal properties compared to HKUST-1 (C), mainly due to its hierarchical porous structure facilitating easy mass transfer of MB. To evaluate the industrial potential of our adsorbent, we conducted a fixed-bed adsorption column (FBAC) experiment, which showed that HKUST-1 (W) achieved a high removal efficiency of 99 %, confirming its effectiveness as a dye adsorbent in both batch experiments and a FBAC. This approach opens new perspectives in applying upcycled waste-based materials in synthesizing hierarchical porous MOFs.