Porcine Aorta Research Articles

Double-crosslinked dECM bioink to print a self-sustaining 3D multi-layered aortic-like construct

Cardiovascular disease is the leading cause of death worldwide, with related mortality increasing from 12.1 million to 18.6 million in the past 30 years.To address the supply limitation of autologous vascular grafts and overcome the limits of current treatment options, 3D bioprinting techniques have been investigated.This study aimed at introducing a self-supporting and multi-layered 3D bioprinted construct as a promising alternative for large-blood vessel replacement. To this end, we developed an alginate-gelatin bioink enriched with decellularized extracellular matrix (dECM) of porcine aorta combined with a two-step crosslinking process. We investigated the feasibility of achieving structural stability and shape fidelity of the bioprinted construct over time through rheological characterization, printability tests, and degradation tests.According to the results of rheology and printability tests, dECM-enriched bioink combined with the double-crosslinking process (internal and external crosslink) showed good printability and high shape fidelity, withstanding more than 35 layers without the need for support. Moreover, the bioprinted construct preserved its structural stability over time, retaining a wall thickness comparable to that of the native aorta. Finally, immortalized mouse fibroblasts embedded in the bioink were well adhered to the bioink and alive over time. The double-crosslinked bioink represents an impactful strategy to produce an alternative conduit with the native hierarchical structure of the large blood vessels.

Surgical skill analysis focused on tissue traction in laparoscopic wet lab training

BackgroundTissue handling is one of the pivotal parts of surgical procedures. We aimed to elucidate the characteristics of experts' left-hand during laparoscopic tissue dissection. MethodsParticipants performed tissue dissection around the porcine aorta. The grasping force/point of the grasping forceps were measured using custom-made sensor forceps, and the forceps location was also recorded by motion capture system (Mocap). According to the global operative assessment of laparoscopic skills (GOALS), two experts scored the recorded movies, and based on the mean scores, participants were divided into three groups: novice (<10), intermediate (10≤ to <20), and expert (≤20). Force-based metrics were compared among the three groups using the Kruskal-Wallis test. Principal component analysis (PCA) using significant metrics was also performed. ResultsA total of 42 trainings were successfully recorded. The statistical test revealed that novices frequently regrasped a tissue (median total number of grasps, novices: 268.0 times, intermediates: 89.5, experts: 52.0, p < 0.0001), the traction angle became stable against the aorta (median weighted standard deviation of traction angle, novices: 30.74°, intermediates: 26.80, experts: 23.75, p = 0.0285), and the grasping point moved away from the aorta according to skill competency [median percentage of grasping force applied in close zone (0 to 2.0 cm from aorta), novices: 34.96 %, intermediates: 21.61 %, experts: 10.91 %, p = 0.0032]. PCA showed that the efficiency-related (total number of grasps) and effective tissue traction-related (weighted average grasping position in Y-axis and distribution of grasping area) metrics mainly contributed to the skill difference (proportion of variance of first principal component: 60.83 %). ConclusionThe present results revealed experts' left-hand characteristics, including correct tissue grasping, sufficient tissue traction from the aorta, and stable traction angle. Our next challenge is the provision of immediate and visual feedback onsite after the present wet-lab training, and shortening the learning curve of trainees.

An in vitro feasibility study of 355 nm laser atherectomy for the treatment of peripheral atherosclerotic lesions.

In this study, we utilized a novel 355 nm laser to ablate porcine aortas in the presence of physiological saline and contrast agent. Subsequently, we investigated the shape and depth of the resulting injuries. After ablating bovine tendons and aortas with the laser, we analyzed the size and quantity of particles postablation. Finally, we conducted ablation experiments using human ex vivo plaques. The analysis revealed minimal damage to porcine aortas within 2 s of exposure to the 355 nm laser. The degree of injury in the presence of contrast agent was higher than that in the presence of physiological saline but significantly lower than the damage caused by 308 nm laser. Regardless of whether it was bovine tendon or porcine aorta tissue, the proportion of particles <25 μm postlaser ablation exceeded 99%. Lastly, the 355 nm laser successfully opened three types of plaques: chronically occluded, stent restenosis, and stale thrombosis.

Pigs as Models to Test Cardiovascular Devices.

Pigs as laboratory animals are used in preclinical studies aimed at developing medical devices for cardiac surgery. The anatomy of the cardiovascular system of these animals has been well studied and acknowledged as suitable for use and the testing of new cardiovascular devices developed for humans. However, there are no morphometric characteristics of the aortic root and thoraco-abdominal part of porcine aorta. This can lead to difficulties in experimental surgery and even result in the death of experimental animals due to the mismatch in the size of the implantable devices. Thus, such information is essential to enhance the efficiency of surgical technologies used for eliminating aortic pathologies in their various sections. The purpose of our research is to study the anatomy of the aorta in mini pigs and to assess whether the size, age, and sex of the animals affect the size of the main structures in their aortas. In addition, we attempted to compare the results obtained by transesophageal echocardiography (TEE) and angiography. We studied 28 laboratory mini pigs, dividing them into three groups by body weight (40-70 kg, 71-90 kg, and 90 kg). We did not find any relationship between the external somatometric characteristics of the animals and the size of their aortas. Animals have individual anatomical variability in their cardiovascular systems, which means that they need to be examined in terms of preoperative planning by any available method-echocardiography, angiography, or multispiral computed tomography (CT).

What is the weakest point of a secured aortic cannula in central extracorporeal membrane oxygenation?

The purpose of this study was to compare techniques for securing the aortic extracorporeal membrane oxygenation (ECMO) cannula, using in vitro models. Two models were studied: a tissue model using porcine aortas and a stand model replacing the aorta with a metal stand to study the system independent of the tissue. Interventions in each model were divided into three experimental groups: Group 1 (3-0 Prolene® + 20-French Medtronic Arterial Cannula EOPA™), Group 2 (4-0 Prolene® + 16-French Medtronic Arterial Cannula DLP Pediatric), and Group 3 (5-0 Prolene® + 8-French Medtronic Arterial Cannula DLP Pediatric). In separate experiments, both gradual and rapid forces were applied to the cannulas, starting with 9.8 Newtons and increasing exponentially if the cannula remained secured. Additionally, the method of securing the tourniquet and the number of ties securing the tourniquet to the cannula were evaluated. In the tissue model, even with a minimum force of 9.8 Newtons, the suture pulled through the aortic tissue, leaving sutures and ties intact. In the stand model, two purse-string sutures secured by two ligaclips held the cannula reliably and withstood higher total force. Dislodgement was prevented at forces close to 60 Newtons with only two hemostatic clips included in cannulation. The weakest part of the aortic ECMO cannulation system using in vitro experiments was the tissue. Assuming that these experiments translate in vivo, it is therefore critical to prevent any pull on the cannulas by securing ECMO cannulas and ECMO tubing to both the patient and the patient's bed. Sutures with a larger diameter withstand more force. Two medium hemostatic clips can secure Prolene® sutures within snares as safely as a mosquito hemostat. Two polypropylene purse-string sutures secured by two hemostatic clips were most reliable at greater forces. The rationale for publishing our experiments in this manuscript is to (1) communicate our quantification of possible contributing factors to this rare and likely catastrophic complication of unintended decannulation, (2) increase awareness about this potential complication, and (3) increase vigilance to assure prevention of this dreaded complication.

Ex vivo validation of magnetically actuated intravascular untethered robots in a clinical setting

Intravascular surgical instruments require precise navigation within narrow vessels, necessitating maximum flexibility, minimal diameter, and high degrees of freedom. Existing tools often lack control during insertion due to undesirable bending, limiting vessel accessibility and risking tissue damage. Next-generation instruments aim to develop hemocompatible untethered devices controlled by external magnetic forces. Achieving this goal remains complex due to testing and implementation challenges in clinical environments. Here we assess the operational effectiveness of hemocompatible untethered magnetic robots using an ex vivo porcine aorta model. The results demonstrate a linear decrease in the swimming speed of untethered magnetic robots as arterial blood flow increases, with the capability to navigate against a maximum arterial flow rate of 67 mL/min. The untethered magnetic robots effectively demonstrate locomotion in a difficult-to-access target site, navigating through the abdominal aorta and reaching the distal end of the renal artery.

An enhanced deep learning approach for vascular wall fracture analysis

This work outlines an efficient deep learning approach for analyzing vascular wall fractures using experimental data with openly accessible source codes (https://doi.org/10.25835/weuhha72) for reproduction. Vascular disease remains the primary cause of death globally to this day. Tissue damage in these vascular disorders is closely tied to how the diseases develop, which requires careful study. Therefore, the scientific community has dedicated significant efforts to capture the properties of vessel wall fractures. The symmetry-constrained compact tension (symconCT) test combined with digital image correlation (DIC) enabled the study of tissue fracture in various aorta specimens under different conditions. Main purpose of the experiments was to investigate the displacement and strain field ahead of the crack tip. These experimental data were to support the development and verification of computational models. The FEM model used the DIC information for the material parameters identification. Traditionally, the analysis of fracture processes in biological tissues involves extensive computational and experimental efforts due to the complex nature of tissue behavior under stress. These high costs have posed significant challenges, demanding efficient solutions to accelerate research progress and reduce embedded costs. Deep learning techniques have shown promise in overcoming these challenges by learning to indicate patterns and relationships between the input and label data. In this study, we integrate deep learning methodologies with the attention residual U-Net architecture to predict fracture responses in porcine aorta specimens, enhanced with a Monte Carlo dropout technique. By training the network on a sufficient amount of data, the model learns to capture the features influencing fracture progression. These parameterized datasets consist of pictures describing the evolution of tissue fracture path along with the DIC measurements. The integration of deep learning should not only enhance the predictive accuracy, but also significantly reduce the computational and experimental burden, thereby enabling a more efficient analysis of fracture response.

Dissection flap fenestration can reduce re-apposition force of the false lumen in type-B aortic dissection: a computational and bench study.

Thoracic endovascular aortic repair (TEVAR) has been widely adopted as a standard for treating complicated acute and high-risk uncomplicated Stanford Type-B aortic dissections. The treatment redirects the blood flow towards the true lumen by covering the proximal dissection tear which promotes sealing of the false lumen. Despite advances in TEVAR, over 30% of Type-B dissection patients require additional interventions. This is primarily due to the presence of a persistent patent false lumen post-TEVAR that could potentially enlarge over time. We propose a novel technique, called slit fenestration pattern creation, which reduces the forces for re-apposition of the dissection flap (i.e., increase the compliance of the flap). We compute the optimal slit fenestration design using a virtual design of experiment (DOE) and demonstrate its effectiveness in reducing the re-apposition forces through computational simulations and benchtop experiments using porcine aortas. The findings suggest this potential therapy can drastically reduce the radial loading required to re-appose a dissected flap against the aortic wall to ensure reconstitution of the aortic wall (remodeling).

Specimen width affects vascular tissue integrity for in-vitro characterisation

The preparation of slender specimens for in-vitro tissue characterisation could potentially alter mechanical tissue properties. To investigate this factor, rectangular specimens were prepared from the wall of the porcine aorta for uniaxial tensile loading. Varying strip widths of 16 mm, 8 mm, and 4 mm were achieved by excising zero, one, and three cuts within the specimen along the loading direction, respectively. While specimens loaded along the vessel’s circumferential direction acquired consistent tissue properties, the width of test specimens influenced the results of axially loaded tissue; vascular wall stiffness was reduced by approximately 40% in specimens with strips 4 mm wide. In addition, the cross-loading stretch was strongly influenced by specimen strip width, and fiber sliding contributed to the softening of slender tensile specimens, an outcome from finite element analysis of test specimens. We may, therefore, conclude that cutting orthogonal to the main direction of collagen fibers introduces mechanical trauma that weakens slender tensile specimens, compromising the determination of representative mechanical vessel wall properties.

Alaska Pollock-derived Gelatin Sealant has Higher Sealing Strength than, and Comparable Biocompatibility with, Fibrin Sealant in Porcine and Rat Dural Injury Models.

Burst strength study in porcine dural models and functional and histological study in rat dural models. This study aimed to investigate the sealing strength and biocompatibility of Alaska pollock-derived gelatin (ApGltn) and fibrin sealants in disrupted dural injuries. Disruption of the dura mater occurs during spine surgery, leading to cerebrospinal fluid leakage. Fibrin sealant is usually applied to ruptured sites; however, it lacks sealing strength. A novel biocompatible sealant composed of ApGltn was recently demonstrated to have good burst strength and biocompatibility in the porcine aorta. Ten porcine dura maters with central holes were covered with ApGltn and fibrin sealants (five samples per group). The maximum burst strength of each sealant was measured, and histological examination was performed after burst testing. Twenty-seven dura maters of male Wistar rats were used for functional and histopathological evaluations. The rats were treated with three surgical interventions: defect + ApGltn sealant; defect + fibrin sealant; defect alone (nine rats per group). Macroscopic confirmation of the sealant, hindlimb motor function analysis, and histopathological examination were performed at 2, 4, and 8 weeks after the procedure. The maximum burst strength of the ApGltn sealant was approximately 4.4 times higher than that of the fibrin sealant (68.1±12.1 vs. 15.6±8.7mmHg; P<0.001). Histological examination confirmed that the ApGltn sealant showed tight adhesion to the dural surface, whereas a gap was observed between the fibrin sealant and the dura mater. In the rat model, the ApGltn sealant resulted in spinal function and dural histological findings similar to those of the fibrin sealant. The ApGltn sealant had a higher sealing strength than, and comparable effect on dura regeneration with, the fibrin sealant.

Thoracic and abdominal aortic dissection in a hypertensive hyperthyroid cat

Aortic dissection is an uncommon finding in both dogs and cats. The precise pathophysiological mechanisms responsible for the development of aortic dissection remain unclear. In humans, aortic dissection is usually secondary to another systemic disease, such as systemic arterial hypertension, an abnormality of connective tissues or a parietal trauma. This is a case of an aortic dissection in a hypertensive hyperthyroid cat, presenting with haemorrhagic pericardial effusion. The dissection affected both thoracic and abdominal aorta, with histopathological confirmation. This case is an example of the utility of both thoracic and abdominal ultrasound for the diagnosis of aortic dissection in cats and it highlights the importance of rigorous clinical examination. Aortic dissection should be considered in the differential diagnosis of pericardial effusion in cats. Further investigations are fundamental to understand how dissections develop and extend to achieve good clinical results.&#x0D; REFERENCES&#x0D; &#x0D; Braverman et al. (2012) Diseases of the aorta. In: Braunwald’s Heart Disease. A textbook of cardiovascular medicine. 9th Eds Bonow R, Mann D, Zipes D, Libby P. Elsevier Saunders, Philadelphia, pp 1319-1331.&#x0D; Chetboul et al. (2006) Quantitative assessment of velocities of the annulus of the left atrioventricular valve and left ventricular free wall in healthy cats by use of two-dimensional colour tissue Doppler imaging. Am. J. Vet. Res. 2006, 67: 250-258.&#x0D; Cojocaru et al. (2013) Evaluation of oxidative stress in patients with acute ischemic stroke. Romanian Journal of Internal Medicine. 51(2):97-106.&#x0D; D’Ancona et al. (2014) Computational analysis to predict false-lumen perfusion and outcome of type B aortic dissection. The Journal of Thoracic and Cardiovascular Surgery. 148 (4):1756-1758.&#x0D; Gouni et al. (2018) Aortic dissecting aneurysm associated with systemic arterial hypertension in a cat. Schweiz Arch Tierheilkd. 160(5):320-324.&#x0D; Liao et al. (2008) A proteomic study of the aortic media in human thoracic aortic dissection: implication for oxidative stress. Journal of Thoracic and Cardiovascular Surgery. 136(1):65-72.&#x0D; Liu et al. (2016) Ursodeoxycholic acid attenuates acute aortic dissection formation in angiotensin II-infused apolipoprotein E-deficient mice associated with reduced ROS and increased Nrf2 levels. Cellular Physiology and Biochemistry. 38(4): 1391-1405.&#x0D; Phillippi et al. (2009) Basal and oxidative stress-induced expression of metallothionein is decreased in ascending aortic aneurysms of bicuspid aortic valve patients. Circulation. 119(18):2498-2506.&#x0D; Qin et al. (2016) Dynamic monitoring of platelet activation and its role in post-dissection inflammation in a canine model of acute type A aortic dissection. Journal of Cardiothoracic Surgery. 11(1):86.&#x0D; Qing et al. (2012) Ex-vivo haemodynamic models for the study of Stanford type B aortic dissection in isolated porcine aorta. European Journal of Vascular and Endovascular Surgery. 44(4):399-405.&#x0D; Waldrop et al. (2003) Aortic dissection associated with aortic aneurysms and posterior paresis in a dog. Journal of Veterinary Internal Medicine. 17(2):223-229.&#x0D; Wang et al. (2013) An experimental model of Stanford type B aortic dissection with intravenous epinephrine injection. Kaohsiung Journal of Medical Sciences. 29(4):194-199.&#x0D; Wey AC, Atkins CE (2000). Aortic dissection and congestive heart failure associated with systemic hypertension in a cat. Journal of Veterinary Internal Medicine. 14(2):208-213.&#x0D;

Encapsulated stretchable amphibious strain sensors.

Soft and stretchable strain sensors have found wide applications in health monitoring, motion tracking, and robotic sensing. There is a growing demand for strain sensors in amphibious environments, such as implantable sensors, wearable sensors for swimmers/divers, and underwater robotic sensors. However, developing a sensitive, stretchable, and robust amphibious strain sensor remains challenging. This work presents an encapsulated stretchable amphibious strain sensor. The conductive layer, made of silver nanowires embedded below the surface of polydimethylsiloxane, was sandwiched by two layers of thermoplastic polyurethane. Periodic sharp cuts were introduced to change the direction of flow from across the sensor to along the conductive path defined by the opening cracks. The crack advancing and opening is controlled by a unique combination of weak/strong interfaces within the sandwich structure. The cut design and the interfacial interactions between the layers were investigated. The strain sensor exhibited a high gauge factor up to 289, a linear sensing response, a fast response time (53 ms), excellent robustness against over-strain, and stability after 16 000 loading cycles and 20 days in an aqueous saline solution. The functionality of this amphibious strain sensor was demonstrated by tracking the motion of a robotic fish, undertaking language recognition underwater, and monitoring the blood pressure of a porcine aorta. This illustrates the promising potential for this strain sensor for both underwater use and surgically implantable applications.

Biaxial stretch can overcome discrepancy between global and local orientations of wavy collagen fibres

Most frequently used structure-based constitutive models of arterial wall apply assumptions on two symmetric helical (and dispersed) fibre families which, however, are not well supported with histological findings where two collagen fibre families are seldom found. Moreover, bimodal distributions of fibre directions may originate also from their waviness combined with ignoring differences between local and global fibre orientations. In contrast, if the model parameters are identified without histological information on collagen fibre directions, the resulting mean angles of both fibre families are close to ±45°, which contradicts nearly all histologic findings. The presented study exploited automated polarized light microscopy for detection of collagen fibre directions in porcine aorta under different biaxial extensions and approximated the resulting histograms with unimodal and bimodal von Mises distributions. Their comparison showed dominantly circumferential orientation of collagen fibres. Their concentration parameter for unimodal distributions increased with circumferential load, no matter if acting uniaxially or equibiaxially. For bimodal distributions, the angle between both dominant fibre directions (chosen as measure of fibre alignment) decreased similarly for both uniaxial and equibiaxial loads. These results indicate the existence of a single family of wavy circumferential collagen fibres in all layers of the aortic wall. Bimodal distributions of fibre directions presented sometimes in literature may come rather from waviness of circumferentially arranged fibres than from two symmetric families of helical fibres. To obtain a final evidence, the fibre orientation should be analysed together with their waviness.

Evaluation of the aortic wall structural alteration following cryopreservation in 1 year follow-up period

Vascular graft infection is still a life-threatening complication of reconstructive surgery. Among other options, application of cryopreserved homografts can eventuate favorable outcome, if graft replacement is necessary. The preparation and storage of these allografts need special infrastructure and deep subzero (− 80 °C) temperature. However, the longer storage time can lead to inferior results after implantation, based upon clinicians’ experiences. The goal of our investigation was to circumscribe the optimal storage time interval with differential scanning calorimetry (DSC) and histological evaluation, using porcine aorta. All samples were deep-freezed using − 80 °C. Cryopreservated grafts were melted after 4, 6, 12, 16, 20, 24, 28 and 52 weeks; then, DSC and different types of histology were performed. Light microscopy analysis showed significant changes in the connective tissue fibers’ structure from the 16th week; while, DSC measurements confirmed systematic decrease in the thermal stability from the same week during the follow-up period. Our investigation suggested that cryopreservation can lead to significant and increasing microstructural damage of the fibers following the 12th week; thus, the homograft implantation can result in higher success rate inside this timeframe.

The CathPilot: Performance Validation and Preclinical Safety and Feasibility Assessment.

Peripheral endovascular revascularization procedures often fail due to technical limitations of guidewire support, steering, and visualization. The novel CathPilot catheter aims to address these challenges. This study assesses the safety and feasibility of the CathPilot and compares its performance to conventional catheters for peripheral vascular interventions. The study compared the CathPilot to non-steerable and steerable catheters. The success rates and access times for a relevant target inside a tortuous vessel phantom model were assessed. The reachable workspace within the vessel and the guidewire's force delivery capabilities were also evaluated. To validate the technology, chronic total occlusion tissue samples were used ex vivo to compare crossing success rates with conventional catheters. Finally, in vivo experiments in a porcine aorta were conducted to evaluate safety and feasibility. The success rates for reaching the set targets were 31%, 69%, and 100% with the non-steerable catheter, the steerable catheter, and the CathPilot, respectively. CathPilot had a significantly larger reachable workspace, and allowed for up to four times higher force delivery and pushability. In crossing of chronic total occlusion samples, the CathPilot achieved a success rate of 83% and 100%, for fresh and fixed lesions respectively, which was also significantly higher than conventional catheters. The device was fully functional in the in vivo study, and there were no signs of coagulation or damage to the vessel wall. This study shows the safety and feasibility of the CathPilot system and its potential to reduce failure and complication rates in peripheral vascular interventions. The novel catheter outperformed conventional catheters in all defined metrics. This technology can potentially improve the success rate and outcome of peripheral endovascular revascularization procedures.

Mechanical failure analysis of patch materials used in aortic arch reconstruction: implications for clinical practice.

Thick-patch pulmonary homograft, autologous pericardium and CardioCel Neo are common patch materials for aortic arch reconstruction. Insufficient data exist on sutured patch strength and limits of use. We evaluated failure strength of these materials to develop a failure prediction model for clinical guidance. Patch failure strength was evaluated via sutured uniaxial and burst pressure testing. In sutured uniaxial testing, patches were sutured to aortic or Dacron tabs and pulled to failure. In burst pressure testing, patches were sewn into porcine aortas or Dacron grafts and pressurized to failure. Failure membrane tension was calculated. A prediction model of membrane tension versus vessel diameter was generated to guide clinical patch selection. Combining sutured uniaxial and burst pressure test data, pulmonary homograft failure strength {0.61 [interquartile range (IQR): 0.44, 0.78] N/mm, n = 21} was less than half that of autologous pericardium [2.22 (IQR: 1.65, 2.78) N/mm, n = 15] and CardioCel Neo [1.31 (IQR: 1.20, 1.42) N/mm, n = 20]. Pulmonary homograft burst pressure [245 (IQR: 202, 343) mmHg, n = 7] was significantly lower than autologous pericardium [863 (IQR: 802, 919) mmHg, n = 6] and CardioCel Neo [766 (IQR: 721, 833) mmHg, n = 6]. Our model predicts failure limits for each patch material and outlines safety margins for combinations of aortic diameter and pressure. Sutured failure strength of thick-patch pulmonary homograft was significantly lower than autologous pericardium and CardioCel Neo. Patient selection (predicted postoperative arch diameter and haemodynamics) and blood pressure management must be considered when choosing patch material for arch reconstruction. In older children and adolescents, autologous or bovine pericardium may be more suitable materials for aortic patch augmentation to minimize the risk of postoperative patch failure.

4-Axis 3D-Printed Tubular Biomaterials Imitating the Anisotropic Nanofiber Orientation of Porcine Aortae.

Many of the peculiar properties of the vasculature are related to the arrangement of anisotropic proteinaceous fibers in vessel walls. Understanding and imitating these arrangements can potentially lead to new therapies for cardiovascular diseases. These can be pre-surgical planning, for which patient-specific ex vivo anatomical models for endograft testing are of interest. Alternatively, therapies can be based on tissue engineering, for which degradable in vitro cell growth substrates are used to culture replacement parts. In both cases, materials are desirable that imitate the biophysical properties of vessels, including their tubular shapes and compliance. This work contributes to these demands by offering methods for the manufacturing of anisotropic 3D-printed nanofibrous tubular structures that have similar biophysical properties as porcine aortae, that are biocompatible, and that allow for controlled nutrient diffusion. Tubes of various sizes with axial, radial, or alternating nanofiber orientation along the blood flow direction are manufactured by a customized method. Blood pressure-resistant, compliant, stable, and cell culture-compatible structures are obtained, that can be degraded in vitro on demand. It is suggested that these healthcare materials can contribute to the next generation of cardiovascular therapies of ex vivo pre-surgical planning or in vitro cell culture.

The Role of Location, Length, and Thickness of the Intimal Flap in the Propagation of Stanford Type B Aortic Dissection Based on Ex Vivo Porcine Aorta Models.

To explore the role of location, length, and thickness of the intimal flap in the propagation of Stanford type B aortic dissection (TBAD) based on ex vivo porcine aorta models based on ex vivo porcine aorta models. The porcine aortas were harvested and randomly divided into 6 groups to create various TBAD aortic models. We constructed intimal flaps for different locations (group A [entry tear on outer curvature] and group B [entry tear on inner curvature]), lengths (group C [long] and group D [short]), and thicknesses (group E [thick] and group F [thin]). For the ex vivo perfusion experiments conducted on model aortas, an experimental circulation loop (ECL) was employed. The pressure in false lumen (FL) was constantly monitored. A comparison was made between the morphological data collected before and after the experiment to quantify the changes in the FL after the experiment. Compared the results with group B, the mean peak pressures of the FL in group A were lower (106.87±15.55 vs. 124.01±22.75 mm Hg, p=0.028). The mean axial propagation length in group A was shown to be shorter than that of group B (88.14±33.38 vs. 197.43±41.65 mm, p<0.001). The mean peak pressure was higher in group C than in group D (144.04±19.37 vs. 92.51±26.70 mm Hg, p<0.001). The mean peak pressure of group E was higher than that of group F (160.83±32.83 vs. 109.33±15.62 mm Hg, p<0.001), as was the mean axial propagation length of group E (143.11±39.73 vs. 100.45±35.44 mm, p=0.021). According to the results of multivariable linear regression, axial propagation length=45.873-0.703×length of initial FL+0.863× peak pressure (p<0.001). There was a relationship between FL propagation and the location, length, and thickness of the intimal flap. The axial propagation length was related to the length of the intimal flap and the peak pressure of propagation. It may be helpful to evaluate the risk of propagation in patients with TBAD. This study found that the locations, lengths, and thickness of the intimal flap significantly contributed to propagation pressure of FL. Using dissection flap characteristics, a physician can predict FL development in a patient and formulate a treatment plan.The purpose was to investigate the relationship between the dissection flap characteristics (location, length, and thickness) and the propagation of the FL, which is not clear at present. This study employed porcine models to create an experimental circulation loop. The perfusion experiment was conducted using a FL without distal re-entry and a non-pulsating flow.

A custom-built planar biaxial system for soft tissue material testing

Accurate material characterization of soft tissues is crucial for understanding the physiopathology of cardiovascular diseases. However, commercial biaxial testing systems are expensive, prompting the need for affordable custom solutions. This study aimed to develop a low-cost custom biaxial system capable of accurately characterizing the mechanical behavior of soft tissues. The biaxial system was constructed using 3D printing technology and non-captive linear actuators for precise displacement control. A real-time marker tracking system was implemented to estimate dis-placements without the need for costly hardware. The system's performance was evaluated through tests on a calibration spring and frozen porcine aorta samples. The linear actuators demonstrated excellent response to user position input after motor tuning, showing no discrepancies between commands and actual positions. The experimental testing of the calibration spring showed good agreement with the analytical solution, validating the system's ability to accurately test materials. Testing on porcine aorta samples revealed stress–strain responses consistent with existing literature, accounting for potential variations due to tissue preservation and regional material property heterogeneity. Overall, this custom biaxial system demonstrates promising performance in accurately assessing the mechanical behavior of soft tissues, providing researchers with a valuable tool for cardiovascular disease research and tissue engineering applications.

Glycosaminoglycans modulate compressive stiffness and circumferential residual stress in the porcine thoracic aorta

The mechanical properties of the aorta are influenced by the extracellular matrix, a network mainly comprised of fibers and glycosaminoglycans (GAG). In this work, we demonstrate that GAG contribute to the opening angle (a marker of circumferential residual stresses) in intact and glycated aortic tissue. Enzymatic GAG depletion was associated with a decrease in the opening angle, by approximately 25% (p = 0.009) in the ascending (AS) region, 32% (p = 0.003) in the aortic arch (AR), and 42% (p = 0.001) in the lower descending thoracic (LDT) region. A similar effect of GAG depletion on aortic ring opening angle was also observed in previously glycated tissues. Using indentation testing, we found that the radial compressive stiffness significantly increased in the AS region following GAG depletion, compared to fresh (p = 0.006) and control samples (p = 0.021), and that the compressive properties are heterogeneous along the aortic tree. A small loss of water content was also detected after GAG depletion, which was most prominent under hypotonic conditions. Finally, the AS region was also associated with a significant loss of compressive deformation (circumferential stretch that is < 1) in the inner layer of the aorta following GAG depletion, suggesting that GAG interact with ECM fibers in their effect on aortic mechanics. The importance of this work lies in its identification of the role of GAG in modulating the mechanical properties of the aorta, namely the circumferential residual stresses and the radial compressive stiffness, as well as contributing to the swelling state and the level of circumferential prestretch in the tissue. Statement of significanceThe mechanical properties of the aorta are influenced by the composition and organization of its extracellular matrix (ECM) and are highly relevant to medical conditions affecting the structural integrity of the aorta. The extent of contribution of glycosaminoglycans (GAG), a relatively minor ECM component, to the mechanical properties of the aorta, remains poorly characterized. This works shows that GAG contribute on average 30% to the opening angle (an indicator of circumferential residual stresses) of porcine aortas, and that GAG-depletion is associated with an increased radial compressive stiffness of the aorta. GAG-depletion was also associated with a loss of water content and compressive deformation in the inner layers of the aortic wall providing insight into potential mechanisms for their biomechanical role.