Polystyrene Domains Research Articles

Single step synthesis and organization of gold colloids assisted by copolymer templates

We report here an original single-step process for the synthesis and self-organization of gold colloids by simply incorporating gold salts into a solution prepared using polystyrene (PS)-polymethylmethacrylate copolymer and thiolated PS with propylene glycol methyl ether acetate as a solvent. The spin-coating and annealing of this solution then allows the formation of PS domains. Depending on the polymer concentration of the as-prepared solution, there can be either one or several gold nanoparticles (Au NPs) per PS domain. For high concentrations of Au NPs in PS domains, the coupling between plasmonic NPs leads to the observation of a second peak in the optical extinction spectrum. Such a collective effect could be relevant for the development of optical strain sensors in the near future.

Nano- and Microstructures of Magnetic Field-Guided Maghemite Nanoparticles in Diblock Copolymer Films

The control over the alignment of nanoparticles within a block copolymer matrix was investigated for different external magnetic fields with respect to producing well-aligned, highly oriented metal-oxide-polymer nanopatterns. Hybrid films were prepared by solution casting under a range of external magnetic fields. The nano- and microstructure of maghemite nanoparticles within poly(styrene-b-methyl methacrylate) diblock copolymer films as a function of the nanoparticle concentration was studied using optical microscopy, atomic force microscopy, scanning electron microscopy, and grazing incidence small-angle X-ray scattering. Because of a polystyrene (PS) coating, the nanoparticles are incorporated in the PS domains of the diblock copolymer morphology. At higher nanoparticle concentrations, nanoparticle aggregates perturb the block copolymer structure and accumulate at the films surface into wire-shaped stripes. These wire-shaped nanoparticle aggregates form mainly because of the competition between nanoparticle-polymer friction and magnetic dipolar interaction. The magnetic behavior of the hybrid films was probed at different temperatures for two orthogonal directions (with the line-shaped particle aggregates parallel and perpendicular to the magnetic field). The hybrid film systems show superparamagnetic behavior and remarkable shape anisotropy that render them interesting for magnetic applications.

Shape of the particles produced by seeded dispersion polymerization of styrene

In this work, seeded dispersion polymerization of styrene was carried out in the presence of various types of seed particles. We found that in the case of polystyrene and poly(methyl methacrylate) seeds, the shape of the resulting particles remained spherical. For styrene/poly(nbutyl methacrylate) (PnBMA) and styrene/poly(lauryl methacrylate) seeding particles, raspberry like particles were produced along with those of occluded morphology. We studied the effects of various polymerization factors such as concentrations of a stabilizer, an initiator, and a monomer, a weight ratio of methanol to water, a type of initiator, weight ratio of styrene to Pn-BMA seed particles, and polymerization temperature on the formation of these raspberry-like particles. The experimental results showed that the increase of concentrations of the initiator and the stabilizer as well as that of methanol favors the formation of such particles by increasing their surface roughness. An increase of the temperature of polymerization had the same effect on the morphology of resulting product. We hypothesized that the nucleation and growth of specifically fine-structured polystyrene domains on the surface of the Pn-BMA particles guides the formation of non-linear morphology during seeded polymerization in colloidal solution.

Mechanism for the formation of PNIPAM/PS core/shell particles

ABSTRACTA multi‐stage polymerization method was previously used to prepare PNIPAM/PS core/shell particles that exhibited uniform “raspberry‐like” structures. In this current study, this polymerization process was carefully investigated in order to elucidate the PS (polystyrene) shell formation mechanism. The results indicated that the “raspberry” structure is due to heterocoagulation of polystyrene domains onto PNIPAM (poly(N‐isopropylacrylamide)) particle surfaces. Different sizes and numbers of the PS domains can be obtained by varying the styrene feed rate. It was also found that linear PNIPAM may increase the compatibility between PNIPAM and PS polymers. In addition, this heterocoagulation mechanism for forming structured particles was successfully applied to a PNIPAM and Ludox® colloidal silica nanoparticle system where a core/shell structure was also obtained. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40124.

Shear field in the mold cavity of multimelt multi-injection molding revealed by the morphology distribution of a model polymer blend

The morphology distribution of a model polymer blend, polystyrene (PS)/polyethylene (PE), molded by multimelt multi-injection molding (MMMIM) process was studied by scanning electronic microscopy and polarizing light microscopy. An unusual double skin/core morphology was observed. The minor phase, PS, showed highly deformed morphology in both the skin layer near the mold wall and the core layer near the skin/core layer's interface. Meanwhile, in the regions that highly deformed PS phase showed, highly ordered cylindritic crystal structures of PE are also formed. As we all know the driving force and the basic prerequisite to deform the dispersed droplet and form the oriented crystal structure is the shear field. So an attempt was made to correlate the dispersed phase morphology, crystalline morphologies, and shear rate. The shear rate, estimated via the capillary number, across the thickness of the parts molded by MMMIM was bimodal. Even if the coalescence and relaxation of the dispersed phase during and after mold filling cannot be ignored, both the highly dispersed PS domains and the highly ordered crystal structure of PE showed in the regions with the maximum calculated shear rate, which is consistent with the generally accepted theories that strong shear flow is favorable to the formation of the oriented structures. POLYM. ENG. SCI., 54:2345–2353, 2014. © 2013 Society of Plastics Engineers

Morphological Control of Helical Structures of an ABC-Type Triblock Terpolymer by Distribution Control of a Blending Homopolymer in a Block Copolymer Microdomain

The control of microphase-separated structures in a poly(styrene-block-butadiene-block-methyl methacrylate) (SBM) was investigated in three dimensions by transmission electron microtomography. Neat SBM self-assembled into a double-helical structure of polybutadiene (PB) domains around hexagonally packed core polystyrene (PS) cylinders in a poly(methyl methacrylate) matrix. When PS homopolymer with a lower molecular weight than that of the PS block in SBM was added to the SBM, the PB domains transformed from double-helical structures to spherical domains, while maintaining the helical trajectories. In contrast, adding a higher molecular weight PS to the SBM changed the helical structures from double- to triple-stranded structures and even to four-stranded structures. The helical structures of the PB domains were strongly affected by the distribution of the blended polystyrenes in the core cylindrical PS domains.

Effect of Interfaces on the Melting of PEO Confined in Triblock PS-b-PEO-b-PS Copolymers

Block copolymers form nanostructures that have interesting physical properties because they combine, for a single compound, the complementary features brought by each block. However, in order to fully exploit these properties, the physical state of each kind of domain must be precisely controlled. In this work, triblock PS-b-PEO-b-PS copolymers consisting of a central poly(ethylene oxide) (PEO) block covalently bonded to polystyrene (PS) blocks were synthesized by Atom Transfer Radical Polymerization. Their morphology was investigated by X-ray scattering and TEM experiments whereas their thermodynamic behavior was characterized by DSC. A strong decrease of both the melting temperature and the degree of crystallinity of PEO, due to its confinement between the PS domains, was observed and analyzed with a modified Gibbs-Thomson equation, following the approaches used for fluids confined in porous media. The existence of an amorphous bound layer, a few nanometers thick, at the PEO/PS interface, that does not undergo any phase transition in the temperature range investigated, accounts for both the melting temperature depression and the decrease of crystallinity upon confinement. This interfacial layer may significantly affect the mechanical and transport properties of these block copolymers that find applications as solid polymer electrolytes in batteries for example. Moreover, the value obtained for the solid PEO/liquid PEO surface tension is lower than those previously published but is thermodynamically consistent with the surface tensions of polymers at the solid/vapor and liquid/vapor interfaces.

Cobalt Nanoparticles Growth on a Block Copolymer Thin Film: A Time-Resolved GISAXS Study

Cobalt sputter deposition on a nanostructured polystyrene-block-poly(ethylene oxide), P(S-b-EO), template is followed in real time with grazing incidence small-angle X-ray scattering (GISAXS). The polymer template consists of highly oriented parallel crystalline poly(ethylene oxide) (PEO) domains that are sandwiched between two polystyrene (PS) domains. In-situ GISAXS shows that cobalt atoms selectively decorate the PS domains of the microphase-separated polymer film and then aggregate to form surface metal nanopatterns. The polymer template is acting as a directing agent where cobalt metal nanowires are formed. At high metal load, the characteristic selectivity of the template is lost, and a uniform metal layer forms on the polymer surface. During the early stage of cobalt metal deposition, a highly asymmetric nanoparticles agglomeration is dominating structure formation. The cobalt nanoparticles mobility in combination with the high tendency of the nanoparticles to coalescence and to form immobile large-sized particles at the PS domains are discussed as mechanisms of structure formation.

A Simple Route To Improve Inorganic Nanoparticles Loading Efficiency in Block Copolymer Micelles

The formation of well-defined polymer/inorganic nanoparticles (NPs) hybrid micelles with high loading of the NPs is critical to the development of nanomaterials with desired optical, electric, magnetic, and mechanical properties. Herein, we introduce a simple strategy to encapsulate monodisperse polystyrene (PS)-grafted Au NPs into the PS core of PS-b-poly(4-vinylpyridine) (PS-b-PVP) micelles through block copolymer (BCP)-based supramolecular assembly. We demonstrate that selective incorporation of gold NPs into the PS cores during the assembly process can induce the formation of well-ordered hybrid micelles with spherical, cylindrical, or nanosheet morphologies. The number of NPs in each micelle can be effectively increased by simply increasing the content of NPs and adjusting the ratio of 3-n-pentadecylphenol (PDP) to the P4VP units accordingly. The balance between the NP loading (increasing the volume fraction of PS domain) and the PDP addition (increasing the volume fraction of PVP(PDP) domain) mainta...

Generation of nanocomposites based on polystyrene-grafted CdSe nanoparticles by grafting through and block copolymer

Continuing with our previous work, in which CdSe nanoparticles were functionalized with polystyrene (PS) brushes (CdSe-PS) by the grafting through method, nanocomposites were prepared by adding them to a poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymer. After characterizing CdSe-PS nanoparticles obtained at different polymerization times of 3, 5, and 8 h by means of thermogravimetric analysis and gel permeation chromatography, CdSe-PS nanoparticles obtained after 5 h of polymerization (CdSe-PS(5h)) were chosen as the most adequate for the generation of nanocomposites. Atomic force microscopy (AFM) was used for morphological characterization of SBS/CdSe-PS(5h) nanocomposites. AFM images showed a good dispersion of the nanoparticles in the block copolymer, with the placement of the nanoparticles in the PS domains due to the improved affinity obtained by their functionalization with PS brushes.

Novel Synthetic Strategy for the Sulfonation of Polybutadiene and Styrene–Butadiene Copolymers

The selective and quantitative sulfonation of polybutadiene (PB) and triblock copolymers polystyrene-b-polybutadiene-b-polystyrene (SBS) has been successfully obtained through a novel procedure consisting of two reaction steps carried out in a single batch: free radical addition of thiolacetic acid to olefinic double bonds followed by autocatalytic oxidation of the thioacetylated polymer with in situ generated organic peracids. The polymers resulting from the two reactions were fully characterized by NMR, FTIR, and elemental analysis; the ion exchange capacity (IEC) of the sulfonated polymers was assessed by elemental analysis and titration with NaOH. Critical desulfonation temperatures of the poly(alkylsulfonate)s were observed in the range 160–270 °C, whereas the thermal decomposition starts at about 380 °C. The TUNA-AFM analysis of a sample of SBS containing 79 mol % of alkylsulfonic groups showed a phase-separated morphology consisting of polystyrene domains of about 28 nm embedded in the sulfonated p...

Chemically Enhancing Block Copolymers for Block-Selective Synthesis of Self-Assembled Metal Oxide Nanostructures

We report chemical modification of self-assembled block copolymer thin films by ultraviolet light that enhances the block-selective affinity of organometallic precursors otherwise lacking preference for either copolymer block. Sequential precursor loading and reaction facilitate formation of zinc oxide, titanium dioxide, and aluminum oxide nanostructures within the polystyrene domains of both lamellar- and cylindrical-phase modified polystyrene-block-poly(methyl methacrylate) thin film templates. Near-edge X-ray absorption fine structure measurements and Fourier transform infrared spectroscopy show that photo-oxidation by ultraviolet light creates Lewis basic groups within polystyrene, resulting in an increased Lewis base-acid interaction with the organometallic precursors. The approach provides a method for generating both aluminum oxide patterns and their corresponding inverses using the same block copolymer template.

Selective Dispersion of Porphyrin Metal Complex into Styrene-(Ethylene-co-butylene)-Styrene Triblock Copolymer

Porphyrin metal complex covered with polystyrene (PS) arm chains was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene from the porphyrin metal (Cu) complex with chain transfer agents (CTA) in the presence of AIBN at 80 °C (PDI < 1.2). Obtained PS covered porphyrin metal complex was then mixed with different molar ratio of styrene-(ethylene-co-butylene)-styrene (SEBS) triblock copolymer to give well-defined morphologies such as cylinder and lamella structures, where the porphyrin metal complex was selectively dispersed into the PS domain of the SEBS triblock copolymer. These materials could be expected to show interesting electroactive properties, because of high dielectric constant (k) and elastomeric property from the porphyrin metal complex and the SEBS triblock copolymer elastomer, respectively.

Thermally sensitive block copolymer particles prepared via aerosol flow reactor method: Morphological characterization and behavior in water.

This work describes properties of thermo-sensitive submicron sized particles having the same chemical composition but different morphologies. These particles have been prepared with an aerosol technique using dimethylformamide solutions of linear polystyrene-block-poly(N-isopropylacrylamide-block-polystyrene, PS-b-PNIPAM-b-PS. The particles were characterized by cryo-electron microscopy, microcalorimetry, and light scattering. Block-copolymers self-assembled within the particles forming onion-like, gyroid-like, and spherical morphologies having poly(N-isopropylacrylamide) matrix and physically cross-linking polystyrene domains. The particles were dispersed in aqueous media and their behavior in water was studied both below and above the lower critical solution temperature of poly(N-isopropylacrylamide). We found out that the particles with spherical and gyroid-like morphologies swell considerably in water at 20 °C, whereas at 40 °C the particles resemble more of those studied without water treatment. Light scattering experiments showed that the particles gradually aggregate and precipitate with time at 40 °C. Microcalorimetric studies revealed for all three studied morphologies that PNIPAM undergoes a two-step transition due to the different hydration levels of PNIPAM inside and outside the particles. Thicknesses of the PS and PNIPAM layers within the onion-like particles were analyzed using the TEM micrographs by fitting a model of electron density to the integrated electron intensity data. The surface layer of the particles was found out to be PNIPAM, which was supported by light scattering and microcalorimetry. It was also found out from the TEM micrograph analysis that the width of the outmost PS layer is considerably thinner than the one in the dry state prior to immersion in water, and a degradation scheme is proposed to explain these results.

Surface phase separation, dewetting feature size, and crystal morphology in thin films of polystyrene/poly(ε-caprolactone) blend

Thin films of polystyrene (PS)/poly(ε-caprolactone) (PCL) blends were prepared by spin-coating and characterized by tapping mode force microscopy (AFM). Effects of the relative concentration of PS in polymer solution on the surface phase separation and dewetting feature size of the blend films were systematically studied. Due to the coupling of phase separation, dewetting, and crystallization of the blend films with the evaporation of solvent during spin-coating, different size of PS islands decorated with various PCL crystal structures including spherulite-like, flat-on individual lamellae, and flat-on dendritic crystal were obtained in the blend films by changing the film composition. The average distance of PS islands was shown to increase with the relative concentration of PS in casting solution. For a given ratio of PS/PCL, the feature size of PS appeared to increase linearly with the square of PS concentration while the PCL concentration only determined the crystal morphology of the blend films with no influence on the upper PS domain features. This is explained in terms of vertical phase separation and spinodal dewetting of the PS rich layer from the underlying PCL rich layer, leading to the upper PS dewetting process and the underlying PCL crystalline process to be mutually independent.

Enzyme adsorption on polymer-based confined bioinspired biosensing surface

Biosensor stability and performance are known to benefit from the nanoscale confinement of its immobilized protein or enzyme components due to its ability to mimic the natural environment of these biomolecules. In this study, the enzyme cholesterol oxidase (ChOx) was adsorbed on pores created on polystyrene-block-polymethyl methacrylate films. A combination of fluorescence microscopy and atomic force microscopy analysis reveals the presence of ChOx on the polystyrene domain pores. Absorbance measurements on a cholesterol solution exposed to the enzyme deposited on the block copolymer reveal the occurrence of catalysis. The results of this study demonstrate the feasibility of immobilizing enzymes in a polymer-derived bioinspired platform that can be utilized for biosensing applications.

Selective localization of multi-wall carbon nanotubes in homopolymer blends and a diblock copolymer. Rheological orientation studies of the final nanocomposites

In this study, pristine as well as polystyrene (PS) and poly(2-vinylpyridine) (P2VP) functionalized multi-wall carbon nanotubes (MWCNTs) were selectively incorporated in homopolymer binary blends of PS/P2VP and diblock copolymer (BCP) of the PS-b-P4VP type [P4VP: poly(4-vinylpyridine)]. Studies on the blends verified the chemical affinity of PS and P2VP grafted MWCNTs to the corresponding phase. Based on the results obtained from the blend systems, MWCNTs were incorporated in a PS-b-P4VP copolymer matrix with lamellar morphology and large amplitude oscillatory shear (LAOS) experiments were performed to achieve orientation of the BCP lamellae. The PS grafted MWCNTs (MWCNT-g-PS) were selectively sequestered in the PS phase and the P2VP grafted MWCNTs (MWCNT-g-P2VP) in the P4VP phase of the diblock copolymer. Unfunctionalized pristine MWCNTs were localized on the PS phase of the blend system and no special preference was observed towards the diblock copolymer PS domains. Small angle X-ray scattering (SAXS) analysis revealed the orientation of the alternating lamellae formed by the diblock copolymer when studied by LAOS. The localization of PS and P2VP grafted MWCNTs on the corresponding blend and BCP phase was also verified by transmission electron microscopy (TEM) studies.

Ordering of block copolymer/nanoparticle composite thin films

The ordering behavior of polymer nanocomposites composed of gold nanoparticles confined in the polystyrene (PS) domains of PS based block copolymers was investigated. The results reveal that the self-assembly of nanoparticles in the PS domains improved the ordering of microdomains. This is attributed to the presence of nanoparticles that reduced the degree of segregation of the system, causing slow phase separation. This facilitates the packing of the cylindrical microdomains, leading to a well-ordered structure of the composite. When particles were incorporated into the major domains of cylindrically ordered block copolymer, the connectivity of the domains allowed particles to move to the top of the film to gain additional entropy of the system. In contrast, when particles were organized in parallel cylinders in the block copolymer, they were confined in the cylinders which prevented them from diffusing in the depth direction. The aggregation of nanoparticles was amplified when the composite was annealed in air. We believe that the results from this study will enable more understanding of the effects of nanoparticles on the ordering of block copolymer/nanoparticle composite thin films and will provide a tool in the fabrication of composite thin films. Copyright © 2012 Society of Chemical Industry

Polymerization-induced phase separation as a one-step strategy to self-assemble alkanethiol-stabilized gold nanoparticles inside polystyrene domains dispersed in an epoxy matrix

The rational design of nanoparticle (NP)/polymer composites with advanced functional properties is based on controlling the distribution and self-assembly of NPs in the polymer matrix. In this study we report a new one-step strategy to produce the self-assembly of alkanethiol-stabilized Au NPs in one of the phases generated by polymerization-induced phase separation. The polymerization of a formulation composed of stoichiometric amounts of diglycidylether of bisphenol A (DGEBA) and m-xylylenediamine (mXDA), containing polystyrene (PS) and dodecanethiol-stabilized Au NPs as modifiers, produced the phase separation of PS and Au NPs into microdomains dispersed in the epoxy matrix. A subsequent phase separation and self-assembly of Au NPs took place inside the PS domains leading to an increase in their concentration in a region close to the interface as revealed by TEM images. SAXS spectra showed that NPs self-assembled as colloidal crystals with a body-centered cubic (bcc) structure. By an adequate selection of the amount of PS and the nature of the epoxy precursors, different morphologies of the final blend could be generated. This brings the possibility of controlling the dispersion and self-assembly of NPs in the final material.

Stress–Structure Correlation in PS–PMMA Mixed Polymer Brushes

The ability to alter surface properties such as morphology and surface energy upon external stimuli makes switchable polymer surfaces a promising field of research. Mixed polymer brushes consisting of two different homopolymers covalently attached to a surface are one system in which surface properties can be switched. In this work the correlation between the change in structure and the resulting surface stress in thin poly(methyl methacrylate)–polystyrene mixed polymer brush film upon exposure to selective solvents is investigated. By measuring the forces acting inside the film, we are able to achieve a deeper understanding of the observed structural changes. To obtain a thorough understanding of the film’s morphology, the structure is analyzed by scanning probe microscopy, X-ray reflectivity, and grazing incidence small-angle X-ray scattering (GISAXS). Upon exposure to acetic acid, a selective solvent for PMMA, the film showed a dimple-like structure. This is linked to collapsed domains of polystyrene covered by PMMA chains. Bending experiments resulted in tensile stress, pointing to attractive forces acting inside the polymer film. After exposure to dichloromethane, a good solvent for both polymers, bending experiments revealed a decreased but still high tensile stress, indicating that the microdomains are still present. The results of the experiments enable us to further explain the domain memory effect typically found in these kinds of mixed polymer brush systems.