Polysaccharide Layer Research Articles

Cryo-electron microscopy structure of the di-domain core of Mycobacterium tuberculosis polyketide synthase 13, essential for mycobacterial mycolic acid synthesis.

Mycobacteria are known for their complex cell wall, which comprises layers of peptidoglycan, polysaccharides and unusual fatty acids known as mycolic acids that form their unique outer membrane. Polyketide synthase 13 (Pks13) of Mycobacterium tuberculosis, the bacterial organism causing tuberculosis, catalyses the last step of mycolic acid synthesis prior to export to and assembly in the cell wall. Due to its essentiality, Pks13 is a target for several novel anti-tubercular inhibitors, but its 3D structure and catalytic reaction mechanism remain to be fully elucidated. Here, we report the molecular structure of the catalytic core domains of M. tuberculosis Pks13 (Mt-Pks13), determined by transmission cryo-electron microscopy (cryoEM) to a resolution of 3.4 Å. We observed a homodimeric assembly comprising the ketoacyl synthase (KS) domain at the centre, mediating dimerization, and the acyltransferase (AT) domains protruding in opposite directions from the central KS domain dimer. In addition to the KS-AT di-domains, the cryoEM map includes features not covered by the di-domain structural model that we predicted to contain a dimeric domain similar to dehydratases, yet likely lacking catalytic function. Analytical ultracentrifugation data indicate a pH-dependent equilibrium between monomeric and dimeric assembly states, while comparison with the previously determined structures of M. smegmatis Pks13 indicates architectural flexibility. Combining the experimentally determined structure with modelling in AlphaFold2 suggests a structural scaffold with a relatively stable dimeric core, which combines with considerable conformational flexibility to facilitate the successive steps of the Claisen-type condensation reaction catalysed by Pks13.

Cylindracin, a Cys-rich protein expressed in the fruiting body of Cyclocybe cylindracea, inhibits growth of filamentous fungi but not yeasts or bacteria.

Mushrooms are the fruiting bodies of fungi and are important reproductive structures that produce and disseminate spores. The Pri3 gene was originally reported to be specifically expressed in the primordia (a precursor to the mature fruiting body) of the edible mushroom Cyclocybe aegerita. Here, we cloned a Pri3-related cDNA from Cyclocybe cylindracea, another species in the same genus, and showed that the gene is specifically expressed at the pileus surface of the immature fruiting body but not in the primordia. Immunohistochemistry showed that the translated protein is secreted into a polysaccharide layer of the pileus surface. The recombinant C-terminal Cys-rich domain of the protein showed antifungal activity against three filamentous fungi and inhibited hyphal growth and conidiogenesis. These results suggest that the PRI3-related protein of C. cylindracea, named cylindracin, plays an important role in the defense against pathogens.

The human gut symbiont Ruminococcus gnavus displays strain-specific exopolysaccharides modulating the host immune response

Ruminococcus gnavus is a prevalent member of the human gut microbiota and over-represented in inflammatory bowel diseases. R. gnavus ATCC 29149 was previously shown to produce a pro-inflammatory exopolysaccharide (EPS) referred to here as glucorhamnan-I or EPS29149. Here, we determined the structure of the polysaccharides from R. gnavus ATCC 35913 (EPS35193) and E1 (EPSE1) strains, both consist of a repeating unit with a backbone composed of four α-L-rhamnose units, with alternate 2- and 3-linkages, and a β-d-glucose residue linked to O-2 of one 3-Rha as side branch. This structure differs from EPS29149 and is referred to as glucorhamnan-II. EPS35193 and EPSE1 showed variation in the glucosylation level that is non-stochiometric in EPS35193.R. gnavus strains and their purified EPS induced strain-specific production of cytokines and chemokines in bone-marrow derived dendritic cells and NF-κB activation in reporter cells. R. gnavus ATCC 35913 was the most immunogenic strain, likely due to the absence of an additional capsular polysaccharide layer as shown by TEM, while EPS29149, EPS35193 and EPSE1 showed activation of TLR4 reporter cells. These strain-specific differences in R. gnavus cell surface glycosylation and host response underscore the importance of studying R. gnavus-host interaction at the strain level.

Characterization of the carbapenem-resistant Acinetobacter baumannii clinical reference isolate BAL062 (CC2:KL58:OCL1): resistance properties and capsular polysaccharide structure.

The carbapenem-resistant Acinetobacter baumannii isolate BAL062 is a clinical reference isolate used in several recent experimental studies. It is from a ventilator-associated pneumonia (VAP) patient in an intensive care unit at the Hospital for Tropical Diseases (HTD), Ho Chi Minh City, Vietnam in 2009. Here, BAL062 was found to belong to the B sub-lineage of global clone 2 (GC2) isolates in the previously reported outbreak (2008 and 2012) of carbapenem-resistant VAP A. baumannii at the HTD. While related sub-lineage B outbreak isolates were extensively antibiotic-resistant and carry GC2-associated genomic resistance islands, AbGRI1, AbGRI2, and AbGRI3, BAL062 has lost AbGRI3 and three aminoglycoside resistance genes, armA, aacA4, and aphA1, leading to amikacin, tobramycin and kanamycin susceptibility. The location of Tn2008VAR found in the chromosome of this sub-lineage was also corrected. Like many of the outbreak isolates, BAL062 carries the KL58 gene cluster at the capsular polysaccharide (CPS) synthesis locus and an annotation key is provided. As information about K type is important for the development of novel CPS-targeting therapies, the BAL062 K58-type CPS structure was established using NMR spectroscopy. It is most closely related to K2 and K93, sharing similar configurations and linkages between K units, and contains the rare higher monosaccharide, 5,7-diacetamido-3,5,7,9-tetradeoxy-d-glycero-l-manno-non-2-ulosonic acid (5,7-di-N-acetyl-8-epipseudaminic acid; 8ePse5Ac7Ac), the 8-epimer of Pse5Ac7Ac (5,7-di-N-acetylpseudaminic acid). Inspection of publicly available A. baumannii genomes revealed a wide distribution of the KL58 locus in geographically diverse isolates belonging to several sequence types that were recovered over two decades from clinical, animal, and environmental sources.IMPORTANCEMany published experimental studies aimed at developing a clearer understanding of the pathogenicity of carbapenem-resistant Acinetobacter baumannii strains currently causing treatment failure due to extensive antibiotic resistance are undertaken using historic, laboratory-adapted isolates. However, it is ideal if not imperative that recent clinical isolates are used in such studies. The clinical reference isolate characterized here belongs to the dominant A. baumannii GC2 clone causing extensively resistant infections and has been used in various recent studies. The correlation of resistance profiles and resistance gene data is key to identifying genes available for gene knockout and complementation analyses, and we have mapped the antibiotic resistance genes to find candidates. Novel therapies, such as bacteriophage or monoclonal antibody therapies, currently under investigation as alternatives or adjuncts to antibiotic treatment to combat difficult-to-treat CRAb infections often exhibit specificity for specific structural epitopes of the capsular polysaccharide (CPS), the outer-most polysaccharide layer. Here, we have solved the structure of the CPS type found in BAL062 and other extensively resistant isolates. As consistent gene naming and annotation are important for locus identification and interpretation of experimental studies, we also have correlated automatic annotations to the standard gene names.

Antibacterial and antibiofilm effect of Zinc Oxide nanoparticles on P. aeruginosa variants isolated from young patients with cystic fibrosis

BackgroundP. aeruginosa, a biofilm-forming bacteria, is the main cause of pulmonary infection in CF patients. We applied ZnO-np as a therapeutic agent for eradicating multi-drug resistance and biofilm-forming P. aeruginosa isolated from young CF patients. MethodsA total of 73 throat and sputum samples taken from young CF patients were inquired. ZnO-np was synthesized and characterized in terms of size, shape, and structure for anti-bacterial activity. The antibiotic susceptibility of isolates before and after the addition of 16 μg/ml of ZnO was evaluated using disc diffusion and microtiter methods, respectively. The gene expression level of QS genes was assessed after treatment with 16 μg/ml ZnO-np. ResultsThe optimum concentration of ZnO-np with a higher inhibitory zone was 16 μg/ml (MIC) and 32 μg/ml (MBC). All isolates were resistant to applied antibiotics, and about 45 % of isolates were strong biofilm-forming bacteria. After treatment with 16 μg/ml ZnO-np, all strains became susceptible to the applied antibiotic except for amikacin, which confers an intermediate pattern. About 63 % and 20 % of isolates were, respectively, non-biofilm and weak biofilm-forming bacteria following the addition of ZnO-np. Relative gene expression of gacA, lasR, and rhlR genes were downregulated significantly (P < 0.001). Although the retS did not have a significant reduction (P = 0.2) ConclusionZnO-np at a concentration of 16 μg/ml could significantly reduce the P. aeruginosa infection by altering the antibiotic susceptibility pattern and inhibiting biofilm formation. Due to their photocatalytic properties and their ability to penetrate the extracellular polysaccharide layer, ZnO nanoparticles can produce ROS, which increases their susceptibility to antibiotics. Nasal delivery of ZnO-np in the form of aerosol can be considered a potential strategy to decrease the mortality rate in CF patients at an early age.

Bulky glycocalyx drives cancer invasiveness by modulating substrate-specific adhesion.

The majority of the eukaryotic cell surface is decorated with a layer of membrane-attached polysaccharides and glycoproteins collectively referred to as the glycocalyx. While the formation of a bulky glycocalyx has been associated with the cancer progression, the mechanisms by which the glycocalyx regulates cancer invasiveness are incompletely understood. We address this question by first documenting subtype-specific expression of the major glycocalyx glycoprotein Mucin-1 (MUC1) in breast cancer patient samples and breast cancer cell lines. Strikingly, glycocalyx disruption led to inhibition of 2D motility, loss of 3D invasion, and reduction of clonal scattering in breast cancer cells at the population level. Tracking of 2D cell motility and 3D invasiveness of MUC1-based sorted subpopulations revealed the fastest motility and invasiveness in intermediate MUC1-expressing cells, with glycocalyx disruption abolishing these effects. While differential sensitivity in 2D motility is attributed to a nonmonotonic dependence of focal adhesion size on MUC1 levels, higher MUC1 levels enhance 3D invasiveness via increased traction generation. In contrast to inducing cell rounding on collagen-coated substrates, high MUC1 level promotes cell adhesion and confers resistance to shear flow on substrates coated with the endothelial surface protein E-selectin. Collectively, our findings illustrate how MUC1 drives cancer invasiveness by differentially regulating cell-substrate adhesion in a substrate-dependent manner.

The two-faced functionality of birch glucuronoxylan in an emulsion-based carrier of vitamin D3

Emulsions are commonly used to fortify beverages with oil-soluble nutrients. Such emulsions must be physically stable, prevent the cargo nutrient from chemical degradation, and release the nutrient at the right time during digestion. Wood hemicelluloses, with their proven capability in producing nanoemulsions and preventing oil oxidation, have the potential to facilitate such a fortification method. These hemicelluloses are unique, as the presence of residual lignin was proven essential in their functionality. However, the structural interplay between the residual lignin and the polysaccharide fraction at the oil-water interface is unknown, including their effects on the storage stability and digestibility of a loaded bioactive compound. We studied the performance of emulsions stabilized by two grades of birch glucuronoxylans (GX) as vessels for vitamin D3. Both GXs showed similar protective performance to methylcellulose regardless of the lignin content during storage and the gastric phase of digestion. The unrefined GX, which contained larger lignin moieties, delayed the release of vitamin D3 during intestinal digestion. We concluded that the interface is primarily built of a polysaccharide layer with the lignin moieties facing towards the oil phase. We have thus highlighted the potential of GX-stabilized emulsions as carriers of vitamin D3. Additionally, these results advance the understanding of lignin-polysaccharide interplay towards a rationalized strategy in biorefining of wood hemicelluloses, for which the ratio of lignin-to-polysaccharide can be adjusted during extraction and post-extraction treatments to obtain a tailor-made emulsifier for various emulsion-based products.

Sac1 links phosphoinositide turnover to cryptococcal virulence.

Cryptococcus neoformans is an environmentally acquired fungal pathogen that causes over 140,000 deaths per year. Cryptococcal infection occurs when infectious particles are deposited into the lung, where they encounter host phagocytic cells. C. neoformans may be engulfed by these phagocytes, an important step of infection that leads to outcomes ranging from termination of infection to cryptococcal dissemination. To study this critical process, we screened approximately 4,700 cryptococcal gene deletion mutants for altered uptake, using primary mouse and human phagocytic cells. Among the hits of these two screens, we identified 93 mutants with perturbed uptake in both systems, as well as others with differences in uptake by only one cell type. We further screened the hits for changes in thickness of the capsule, a protective polysaccharide layer around the cell which is an important cryptococcal virulence factor. The combination of our three screens yielded 45 mutants, including one lacking the phosphatidylinositol-4-phosphate phosphatase Sac1. In this work, we implicate Sac1 in both host cell uptake and capsule production. We found that sac1 mutants exhibit lipid trafficking defects, reductions in secretory system function, and changes in capsule size and composition. Many of these changes occur specifically in tissue culture media, highlighting the role of Sac1 phosphatase activity in responding to the stress of host-like conditions. Overall, these findings show how genome-scale screening can identify cellular factors that contribute to our understanding of cryptococcal biology and demonstrate the role of Sac1 in determining fungal virulence.IMPORTANCECryptococcus neoformans is a fungal pathogen with significant impact on global health. Cryptococcal cells inhaled from the environment are deposited into the lungs, where they first contact the human immune system. The interaction between C. neoformans and host cells is critical because this step of infection can determine whether the fungal cells die or proliferate within the human host. Despite the importance of this stage of infection, we have limited knowledge of cryptococcal factors that influence its outcome. In this study, we identify cryptococcal genes that affect uptake by both human and mouse cells. We also identify mutants with altered capsule, a protective coating that surrounds the cells to shield them from the host immune system. Finally, we characterize the role of one gene, SAC1, in these processes. Overall, this study contributes to our understanding of how C. neoformans interacts with and protects itself from host cells.

Stannous fluoride forms aggregates between outer and inner membranes leading to membrane rupture of Porphyromonas gingivalis and Prevotella pallens.

Stannous has been shown to bind to free lipopolysaccharides, thus preventing them from binding to TLR receptors. This study was undertaken to determine the histomorphological mechanism of stannous binding to anaerobic bacteria. Two bacteria associated with gingivitis and advanced periodontal disease, Porphyromonas gingivalis (P. gingivalis) and Prevotella pallens (P. pallens), were cultured in 25-1,000 μM of stannous fluoride and stannous chloride for 48 h. The growth rate was estimated using absorbance OD600. Bacterial cells were then fixed and processed for transmission electron microscopy (TEM) analysis. Stannous fluoride inhibited proliferation of both P. gingivalis and P. pallens in a dose-dependent manner. There was a statistically significant suppression of the growth curve starting at 100 μM for P. pallens (P = 0.050) and 200 μM for P. gingivalis (P = 0.039). TEM analysis revealed a thick layer of polysaccharides (19.8 nm) in P. gingivalis. The outer and inner membranes were clearly visible with low electron densities in both bacteria. Stannous diffused into bacterial membranes and formed precipitates in the areas spanning outer and inner membranes and below inner membranes. Precipitates varied in size ranging from 46.4 to 84.5 nm in length, and 18.4 to 35.9 nm in width. The membranes were disintegrated in the region where stannous formed precipitates. Cytosolic contents were leaked out, and in several cases, small vesicles were formed. Stannous precipitates were more abundant in numbers and larger in size in bacteria treated with high concentrations (100-300 μM) than in low concentrations (25-50 μM) of stannous fluoride. Furthermore, most of the bacteria were disintegrated in the groups treated with 100-300 μM stannous fluoride. At low concentrations (25 μM), stannous fluoride formed complexes primarily around outer membranes, to which lipopolysaccharides are anchored. Stannous chloride results showed similar trends, but it was less potent than stannous fluoride. Stannous fluoride can penetrate bacteria, bind to the constituents of the membrane and form precipitates between outer and inner membranes and beneath inner membranes. These large precipitates damaged the integrity of membranes and allowed cytosolic contents to be leaked out. Stannous complexes formed at the outer membranes, even at low concentrations (25 μM).

Pengaruh Penambahan Biji Chia dan Selasih Terhidrasi terhadap Sifat Fisikokimia, Sensori, dan Mikrobiologis Yoghurt

Chia and basil seeds are a plant-based source that possess unique characteristic, including the ability to form a gel when hydrated due to polysaccharide layer on outer seeds can absorb water This property can be applied to food products that may easily suffer texture damage such as yogurt. Therefore, further research is needed to determine the potential of chia and basil seeds as a hydrocolloid source that can affect yogurt characteristics and total lactic acid bacteria (LAB). Chia and basil seeds in this study were each processed into two treatments: flour and hydration of whole seeds (1:30). Each treatment was added to yogurt formulation with concentration: 0, 1, 2, and 3% (w/v), then evaluated by preference test to determine selected formulation. Two formulations that were organoleptically preferred by panelists were yogurt with hydrated chia 2% and hydrated basil 3% according to hedonic rating test. The selected formulations were proximate content analysis, syneresis, viscosity, and total LAB. The addition of chia and basil seeds into yoghurt had significant effects on syneresis and viscosity at a significance level of 5%. The syneresis of yogurt with hydrated chia 2% was 1.37±0.21% while the syneresis of yogurt with hydrated basil 3% was 0.58±0.05% which was lower than control 2.44±0.24%. Viscosity of yogurt with hydrated chia 2% was 3808.33±38.19 cP and yogurt with hydrated basil 3% was 4175.00±25.00 cP, which was higher than control 3116.67±28.87 cP. Total LAB in chia yogurt reaching 1.1 109 CFU/g and basil yogurt reaching 1.2 109 CFU/g was higher than control 8.7 107 CFU/g. Overall, the addition of chia and basil seeds improved the quality of yogurt.

Functional domains of Acinetobacter bacteriophage tail fibers.

A rapid increase in antimicrobial resistant bacterial infections around the world is causing a global health crisis. The Gram-negative bacterium Acinetobacter baumannii is categorized as a Priority 1 pathogen for research and development of new antimicrobials by the World Health Organization due to its numerous intrinsic antibiotic resistance mechanisms and ability to quickly acquire new resistance determinants. Specialized phage enzymes, called depolymerases, degrade the bacterial capsule polysaccharide layer and show therapeutic potential by sensitizing the bacterium to phages, select antibiotics, and serum killing. The functional domains responsible for the capsule degradation activity are often found in the tail fibers of select A. baumannii phages. To further explore the functional domains associated with depolymerase activity, tail-associated proteins of 71 sequenced and fully characterized phages were identified from published literature and analyzed for functional domains using InterProScan. Multisequence alignments and phylogenetic analyses were conducted on the domain groups and assessed in the context of noted halo formation or depolymerase characterization. Proteins derived from phages noted to have halo formation or a functional depolymerase, but no functional domain hits, were modeled with AlphaFold2 Multimer, and compared to other protein models using the DALI server. The domains associated with depolymerase function were pectin lyase-like (SSF51126), tailspike binding (cd20481), (Trans)glycosidases (SSF51445), and potentially SGNH hydrolases. These findings expand our knowledge on phage depolymerases, enabling researchers to better exploit these enzymes for therapeutic use in combating the antimicrobial resistance crisis.

A novel phage putative depolymerase, Depo16, has specific activity against K1 capsular-type Klebsiella pneumoniae.

Klebsiella pneumoniae, especially hypervirulent K. pneumoniae (hvKP), is a common opportunistic pathogen that often causes hospital- and community-acquired infections. Capsular polysaccharide (CPS) is an important virulence factor of K. pneumoniae. Some phages encode depolymerases that can recognize and degrade bacterial polysaccharides. In this study, the lytic bacteriophage vB_KpnP_ZK1 (abbreviated as ZK1) was isolated using serotype K1 hvKP as the host. Although amino acid sequence BLAST analysis indicated that the tail fiber protein Depo16 of phage ZK1 showed no significant similarity to any reported phage depolymerases, it displayed enzymatic activities that are characteristic of phage depolymerases. After expression and purification, Depo16 could efficiently remove the capsular polysaccharide layer that surrounds the surface of serotype K1 K. pneumoniae. Although no bactericidal activity was detected, Depo16 makes serotype K1 K. pneumoniae sensitive to peritoneal macrophages (PMs). In addition, in a mouse bacteremia model of serotype K1 K. pneumoniae, 25 µg of Depo16 was effective in significantly prolonging survival. Depo16 treatment can reduce the bacterial load in blood and major tissues and alleviate tissue damage in mice. This indicates that the putative depolymerase Depo16 is a potential antibacterial agent against serotype K1 K. pneumoniae infections.IMPORTANCEKlebsiella pneumoniae often causes hospital-acquired infections and community-acquired infections. Capsular polysaccharide (CPS) is one of the crucial virulence factors of K. pneumoniae. K1 and K2 capsular-type K. pneumoniae strains are the most prevalent serotypes of hypervirulent K. pneumoniae (hvKP). In this study, a novel K. pneumoniae phage named vB_KpnP_ZK1 was isolated, and its putative depolymerase Depo16 showed low homology with other reported phage depolymerases. Depo16 can specifically degrade the K. pneumoniae K1 capsule making this serotype sensitive to peritoneal macrophages. More importantly, Depo16 showed a significant therapeutic effect in a mouse bacteremia model caused by serotype K1 K. pneumoniae. Thus, Depo16 is a potential antibacterial agent to combat serotype K1 K. pneumoniae infections.

Exploring the Role of Metal in the Biointeraction of Metallacarboranes with C. elegans Embryos.

Cobaltabis(dicarbollides), ferrabis(dicarbollide), and their halogenated derivatives are the most studied metallacarboranes with great medical potential. These versatile compounds and their iodinated derivatives can be used in chemotherapy, radiotherapy, particle therapy, and bioimaging when isotopes are used. These metallacarboranes have been evaluated in vitro and recently in vivo with complex animal models. Lately, these studies have been complemented using the invertebrate Caenorhabditis elegans (C. elegans), a nematode largely used in toxicology. When evaluated at the L4 stage, cobaltabis(dicarbollides), ([o-COSAN]- and [8,8'-I2 -o-COSAN]- ), exhibited a higher mean lethal dose (LD50 ) than ferrabis(dicarbollides) ([o-FESAN]- and [8,8'-I2 -o-FESAN]- ). In this work, we used the C. elegans embryos since they are a complex biological barrier with concentric layers of polysaccharides and proteins that protect them from the environment. We assessed if the metal atom changes their biointeraction with the C. elegans embryos. First, we assessed the effects on embryo development for metallacarboranes and their di-iodinated derivatives. We observed changes in color and in their surface structure. An exhaustive physicochemical characterization was performed to understand better this interaction, revealing a stronger interaction of ferrabis(dicarbollide) compounds with C. elegans embryos than the cobaltabis(dicarbollide) molecules. Unveiling the biological interaction of these compounds is of great interest for their future biomedical applications.

Effects of Lacticaseibacillus paracasei SNB-derived postbiotic components on intestinal barrier dysfunction and composition of gut microbiota

The bacterial surface components are considered as effector molecules and show the potential to support intestinal health, but the detailed mechanism of how the gut microbiota changes after the intervention of surface molecules is still unknown. In the present study, capsular polysaccharide (B-CPS) and surface layer protein (B-SLP) were extracted from Lacticaseibacillus paracasei S-NB. The protective effect of direct administration of B-CPS (100 μg/mL) and B-SLP (100 μg/mL) on intestinal epithelial barrier dysfunction was verified based on the LPS-induced Caco-2 cell model. Additionally, the B-CPS and B-SLP could be utilized as carbon source and nitrogen source for the growth of several Lactobacillus strains, respectively. The postbiotic potential of B-CPS and B-SLP was further evaluated by in vitro fermentation with fecal cultures. The B-CPS and a combination of B-CPS and B-SLP regulated the composition of gut microbiota by increasing the relative abundances of Bacteroides, Bifidobacterium, Phascolarctobacterium, Parabacteroides, Subdoligranulum and Collinsella and decreasing the abundance of pathogenic bacteria like Escherichia-Shigella, Blautia, Citrobacter and Fusobacterium. Meanwhile, the total short-chain fatty acid production markedly increased after fermentation with either B-CPS individually or in combination with B-SLP. These results provided an important basis for the application of B-CPS and B-SLP as postbiotics to improve human intestinal health.

Surface reactivity of the iron and manganese-oxidizing bacterium Leptothrix cholodnii SP-6

Surfaces of prokaryotic cells play a significant role in the adsorption of metals from aqueous solution and the formation of authigenic minerals (Konhauser 2006). Although most studies focus on the cell wall, it is known that many bacteria synthesise an extracellular layer of polysaccharides and proteins, including what are known as sheaths. It has been shown that the cyanobacterium Calothrix sp. produces as sheath which is neutrally charged at circumneutral pH values, and it was hypothesized that such a sheath might allow the cyanobacterium to survive in geothermal settings with high silicification rates (Phoenix et al. 2002). Specifically, the dominance of hydroxyl sites on Calothrix’s sheath surface facilitates hydrogen bonding with aqueous silica species, inducing the precipitation of amorphous silica on the sheath and thus protecting the underlying cell (Phoenix et al. 2002). Leptothrix cholodnii is a sheathed, iron and manganese-oxidizing bacterium that frequently inhabits minerals seeps, where Fe2+ and Mn2+ discharge into oxygenated surface waters (Spring et al. 1996). As a result, the sheath becomes encrusted with Fe(III) and Mn(IV) oxyhydroxides while the underlying cells are protected from mineralization (Emerson and Ghiorse 1992, Emerson et al. 2010). However, unlike Calothrix, Leptothrix’s sheath composition suggests that it might behave differently at circumneutral pH (Emerson and Ghiorse 1993). To investigate the surface reactivity of Leptothrix's sheath and cell wall we analyzed isolated sheaths, sheathless cells, and intact filaments of L. cholodnii SP-6. We studied these components using potentiometric titration, zeta-potential, Cd-adsorption, and Fourier transform infrared (FTIR) spectroscopy to elucidate changes in surface charge between the cell wall and sheath. For the isolated sheaths and intact filaments, titration data were fit using a two-site protonation model, resulting in the following pKa values: 6.05 (±0.29) and 9.34 (±0.11); and 7.77 (±0.17) and 10.50 (±0.20), respectively. For the sheathless cells, the best fit was obtained by using a three-site protonation model, resulting in the following pKa values: 5.40 (±0.59), 8.11 (±1.64) and 10.73 (±0.45). Total proton-active site concentrations were lower in isolated sheaths compared to intact filaments. Additionally, at circumneutral pH, net negative charge was lower for sheathless cells compared to intact filaments and isolated sheaths (Fig. 1). This information agrees with the Cd adsorption behaviour found for the three materials (Fig. 2). Thus, our preliminary results suggest that Leptothrix’s sheath is less reactive than the intact filaments at circumneutral pH, leading us to hypothesize that the outermost layer would sequester relatively lower amounts of cations, including Mn2+, from solution and potentially would protect the underlaying cell from deleterious mineralization. In addition to that, the less reactive sheath’s surface would also contribute to cell attachment, which is important for a species commonly found in streams (Phoenix et al. 2002, Emerson et al. 2010).

Developing a genetic approach to target cyanobacterial producers of heterocyte glycolipids in the environment.

Heterocytous cyanobacteria are important players in the carbon and nitrogen cycle. They can fix dinitrogen by using heterocytes, specialized cells containing the oxygen-sensitive nitrogenase enzyme surrounded by a thick polysaccharide and glycolipid layer which prevents oxygen diffusion and nitrogenase inactivation. Heterocyte glycolipids can be used to detect the presence of heterocytous cyanobacteria in present-day and past environments, providing insight into the functioning of the studied ecosystems. However, due to their good preservation throughout time, heterocyte glycolipids are not ideal to detect and study living communities, instead methods based on DNA are preferred. Currently cyanobacteria can be detected using untargeted genomic approaches such as metagenomics, or they can be specifically targeted by, for example, the use of primers that preferentially amplify their 16S rRNA gene or their nifH gene in the case of nitrogen fixing cyanobacteria. However, since not all cyanobacterial nitrogen fixers are heterocytous, there is currently no fast gene-based method to specifically detect and distinguish heterocytous cyanobacteria. Here, we developed a PCR-based method to specifically detect heterocytous cyanobacteria by designing primers targeting the gene (hglT) encoding the enzyme responsible for the last step in the biosynthesis of heterocyte glycolipid (i.e., a glycosyltransferase). We designed several primer sets using the publicly available sequences of 23 heterocytous cyanobacteria, after testing them on DNA extracts of 21 heterocyte-forming and 7 non-heterocyte forming freshwater cyanobacteria. The best primer set was chosen and successfully used to confirm the presence of heterocytous cyanobacteria in a marine environmental sample.

Klebsiella phage KP34gp57 capsular depolymerase structure and function: from a serendipitous finding to the design of active mini-enzymes against K. pneumoniae.

In this work, we determined the structure of Klebsiella phage KP34p57 capsular depolymerase and dissected the role of individual domains in trimerization and functional activity. The crystal structure serendipitously revealed that the enzyme can exist in a monomeric state once deprived of its C-terminal domain. Based on the crystal structure and site-directed mutagenesis, we localized the key catalytic residues in an intra-subunit deep groove. Consistently, we show that C-terminally trimmed KP34p57 variants are monomeric, stable, and fully active. The elaboration of monomeric, fully active phage depolymerases is innovative in the field, as no previous example exists. Indeed, mini phage depolymerases can be combined in chimeric enzymes to extend their activity ranges, allowing their use against multiple serotypes.

Effects of Capsular Polysaccharide amount on Pneumococcal-Host interactions.

Among the many oral streptococci, Streptococcus pneumoniae (Spn) stands out for the capacity of encapsulated strains to cause invasive infection. Spread beyond upper airways, however, is a biological dead end for the organism, raising the question of the benefits of expending energy to coat its surface in a thick layer of capsular polysaccharide (CPS). In this study, we compare mutants of two serotypes expressing different amounts of CPS and test these in murine models of colonization, invasion infection and transmission. Our analysis of the effect of CPS amount shows that Spn expresses a capsule of sufficient thickness to shield its surface from the deposition of complement and binding of antibody to underlying epitopes. While effective shielding is permissive for invasive infection, its primary contribution to the organism appears to be in the dynamics of colonization. A thicker capsule increases bacterial retention in the nasopharynx, the first event in colonization, and also impedes IL-17-dependent clearance during late colonization. Enhanced colonization is associated with increased opportunity for host-to-host transmission. Additionally, we document substantial differences in CPS amount among clinical isolates of three common serotypes. Together, our findings show that CPS amount is highly variable among Spn and could be an independent determinant affecting host interactions.

Identification of CgeA as a glycoprotein that anchors polysaccharides to the spore surface in Bacillus subtilis.

The Bacillus subtilis spore is composed of a core, containing chromosomal DNA, surrounded by a cortex layer made of peptidoglycan, and a coat composed of concentric proteinaceous layers. A polysaccharide layer is added to the spore surface, and likely anchored to the crust, the coat outermost layer. However, the identity of the coat protein(s) to which the spore polysaccharides (SPS) are attached is uncertain. First, we showed that the crust proteins CotVWXYZ and CgeA were all contained in the peeled SPS layer obtained from a strain missing CotE, the outer coat morphogenetic protein, suggesting that the SPS is indeed bound to at least one of the spore surface proteins. Second, CgeA is known to be located at the most downstream position in the crust assembly pathway. An analysis of truncated variants of CgeA suggested that its N-terminal half is required for localization to the spore surface, while its C-terminal half is necessary for SPS addition. Third, an amino acid substitution strategy revealed that SPS was anchored at threonine 112 (T112), which constitutes a probable O-glycosylation site on CgeA. Our results indicated that CgeA is a glycoprotein required to initiate SPS assembly and serves as an anchor protein linking the crust and SPS layers.

Impact mechanism of methylation degree on structure and emulsifying ability of soy hull polysaccharides

As a chemical modification method, methylation may enhance the emulsification of polysaccharides. In this study, we methylated soy hull polysaccharide (SHP) at 60 °C for 0–8 h and analyzed the degree of methylation (DM), crystallinity, surface hydrophobicity, interfacial adsorption, and emulsification capacity of methylation-modified SHP (MSHP). Fourier infrared spectroscopy results showed that the DM changed from 41.48% ± 1.46%–58.30% ± 2.63% after 8 h of methylation (MSHP-8h). The polysaccharide residues were analyzed by 1H NMR. Increasing the DM improved the surface hydrophobicity of SHP, which effectively reduced the interfacial tension (IFT) of SHP at the O/W interface. At equilibration, the IFT was the lowest for MSHP-8h (15.40 mN/m). However, interface thickness was negatively correlated with the DM. Methylation promotes the migration of SHP to the oil side; therefore, the polysaccharide layer remaining in the aqueous phase decreases with an increasing DM at low and fixed SHP concentration. A reduction in hydrophilicity weakens the hydrogen bonds between polysaccharides to cause the polysaccharide layer to be easily destroyed during the dilution process of the droplet size measurement. However, thin adsorption or hydration layers can adversely affect the stability of the interfacial layer; consequently, emulsions prepared with MSHP-4h were the most stable. Our findings provide a practical and theoretical reference for improving emulsification ability of polysaccharides.