Polysaccharide Hydrogels Research Articles

Preparation and characterization of oxidized konjac glucomannan/carboxymethyl chitosan/graphene oxide hydrogel

Polysaccharide hydrogels have been widely used as biomaterials in biomedical field. In this article, composite hydrogels were prepared through the Schiff-base reaction between the aldehyde of oxidized konjac glucomannan (OKGM) and the amino of carboxymethyl chitosan (CMCS). Meanwhile, different amount of graphene oxide (GO) was added as nano-additive. The hydrogels have been characterized by various methods including Fourier transform infrared spectroscopy (FT-IR) and Surface morphology (SEM). Through the observation of SEM, the hydrogels’ scaffolds present a homogeneous interconnected pore structure after lyophilizing. In addition, the influence of different GO content on properties including gelation time, swelling ability, water evaporation rate and mechanical properties was investigated. The results indicate that the hydrogels have short gelation time, appropriate swelling ability and water evaporation rate. Especially, the compressive strength and modulus increase 144% and 296% respectively as the GO content increase from 0 to 5mg/ml. Moreover, MTT assay was applied to evaluate the biocompatibility of hydrogels. The result indicate that hydrogels with GO show better biocompatibility. Therefore, due to the appropriate water absorption capacity, the similar compressive modulus with soft tissue and excellent biocompatibility, the composite hydrogels have potential application in wound dressings.

Influence of mechanical properties of alginate-based substrates on the performance of Schwann cells in culture

In tissue engineering, artificial tissue scaffolds containing living cells have been studied for tissue repair and regeneration. Notably, the performance of these encapsulated-in-scaffolds cells in terms of cell viability, proliferation, and expression of function during and after the scaffold fabrication process, has not been well documented because of the influence of mechanical, chemical, and physical properties of the scaffold substrate materials. This paper presents our study on the influence of mechanical properties of alginate-based substrates on the performance of Schwann cells, which are the major glial cells of peripheral nervous system. Given the fact that alginate polysaccharide hydrogel has poor cell adhesion properties, in this study, we examined several types of cell-adhesion supplements and found that alginate covalently modified with RGD peptide provided improved cell proliferation and adhesion. We prepared alginate-based substrates for cell culture using varying alginate concentrations for altering their mechanical properties, which were confirmed by compression testing. Then, we examined the viability, proliferation, morphology, and expression of the extracellular matrix protein laminin of Schwann cells that were seeded on the surface of alginate-based substrates (or 2D culture) or encapsulated within alginate-based substrates (3D cultures), and correlated the examined cell performance to the alginate concentration (or mechanical properties) of hydrogel substrates. Our findings suggest that covalent attachment of RGD peptide can improve the success of Schwann cell encapsulation within alginate-based scaffolds, and provide guidance for regulating the mechanical properties of alginate-based scaffolds containing Schwann cells for applications in peripheral nervous system regeneration and repair.

Self‐Healing Polysaccharide Hydrogel Based on Dynamic Covalent Enamine Bonds

A self‐healing polysaccharide hydrogel based on dynamic covalent enamine bonds has been prepared with a facile, cost‐effective, and eco‐friendly way. The polysaccharide hydrogel is obtained by mixing cellulose acetoacetate (CAA) aqueous solution with chitosan aqueous solution under room temperature. CAA is synthesized by reaction of cellulose with tert‐butyl acetoacetate (t‐BAA) in ionic liquid 1‐allyl‐3‐methylimidazolium chloride (AMIMCl). The structure and properties of CAA are characterized by FT‐IR, NMR, and solubility measurements. The results demonstrate that CAA possesses water solubility with a degree of substitution (DS) about 0.58–1.11. The hydrogel shows an excellent self‐healing behavior without other external stimuli and good stability under physiological conditions. Furthermore, the polysaccharide hydrogel exhibits pH responsive properties. image

Tracking the degradation of polysaccharide hydrogels by non-invasive near-infrared fluorescence imaging

Tracking the degradation of polysaccharide hydrogels by non-invasive near-infrared fluorescence imaging

Hierarchical architecture of bacterial cellulose and composite plant cell wall polysaccharide hydrogels using small angle neutron scattering.

Small angle neutron scattering (SANS) has been applied to characterise the structure of pure bacterial cellulose hydrogels, and composites thereof, with two plant cell wall polysaccharides (arabinoxylan and xyloglucan). Conventional published models, which assume that bacterial cellulose ribbons are solid one-phase systems, fail to adequately describe the SANS data of pure bacterial cellulose. Fitting of the neutron scattering profiles instead suggests that the sub-structure of cellulose microfibrils contained within the ribbons results in the creation of regions with distinct values of neutron scattering length density, when the hydrogels are subjected to H2O/D2O exchange. This may be represented within a core-shell formalism that considers the cellulose ribbons to comprise a core containing impermeable crystallites surrounded by a network of paracrystalline cellulose and tightly bound water, and a shell containing only paracrystalline cellulose and water. Accordingly, a fitting function comprising the sum of a power-law term to account for the large scale structure of intertwined ribbons, plus a core-shell cylinder with polydisperse radius, has been applied; it is demonstrated to simultaneously describe all SANS contrast variation data of pure and composite bacterial cellulose hydrogels. In addition, the resultant fitting parameters indicate distinct interaction mechanisms of arabinoxylan and xyloglucan with cellulose, revealing the potential of this approach to investigate the role of different plant cell wall polysaccharides on the biosynthesis process of cellulose.

Guest-matrix interactions affect the solvation of cyclodextrin-based polymeric hydrogels: a UV Raman scattering study.

The focus of the present work is to shed light on possible modifications of the molecular properties of polysaccharide hydrogels induced by the establishment of specific non-covalent interactions during the loading of a guest compound inside the gel phase. With this aim, a case study of the encapsulation of caffeine (Caf) inside cyclodextrin-based hydrogels, namely, cyclodextrin nanosponges (NS), is systematically investigated here by using UV Raman scattering experiments. The UV Raman spectra of the hydrogels, analysed as a function of temperature, concentration of the guest molecule loaded in the gel phase and pH, prove particularly informative both on the structural rearrangements of the hydrophobic/hydrophilic groups of the polymeric network and on the breaking/formation of specific guest-matrix interactions. Analysis of the temperature dependence of dynamical parameters, i.e., the dephasing time associated with specific vibrational modes of the polymer backbone, enables the proposal of a molecular picture in which the loading of Caf in NS hydrogels tends to favour access of the water solvent to the more hydrophobic portions of the polymer matrix, which is in turn reflected in a marked increase in the solvation of the whole system. The achievements of this work appear of interest with respect to the design of new possible strategies for controlling the diffusion/release of bioactive molecules inside hydrogel networks, besides corroborating the potential of UV Raman scattering experiments to give new molecular insights into complex phenomena affecting hydrogel phases.

Photocrosslinkable polysaccharide hydrogel composites based on dextran or pullulan-amylose blends with cytokines for a human co-culture model of human osteoblasts and endothelial cells.

Although a large body of research has been devoted to biomaterial development for bone tissue engineering and related medical disciplines in the last few years, novel and optimized materials especially for bone fractures of critical sizes demand continued development. In this respect, polysaccharide-based hydrogels demonstrate beneficial properties and fulfill the main requirements for a bone tissue scaffold as they are hydrophilic, biocompatible, and biodegradable. The aim of the present study was the development of a natural polysaccharide-based scaffold material that can integrate with the host tissue and support bone regeneration. For this purpose, we prepared and investigated two polymer hydrogel composites of photocrosslinkable derivatives of either pure dextran or a mixture of amylose and pullulan with varying composition. In order to increase their biological activity the swollen hydrogel matrices were compounded with stromal derived growth factor (SDF-1) and bone morphogenic protein (BMP-2). As skeletal development is known to depend on angiogenesis, these hydrogel systems were subjected to mono- and co-culture models of human primary osteoblasts (hOBs) with human endothelial cells (HUVEC - as precursors for blood vessel development). The effect of cytokines on hydrogel-dependent cell behavior was analyzed in the presence and absence of the growth factors SDF-1 and BMP-2. Both the employed cell types grew on all cytokine-modified hydrogel composites, which was assessed by optical microscopy and proliferation assays. Migration assays indicated enhanced HUVEC migration under the influence of SDF-1 and real-time PCR demonstrated an enhanced expression of cell-specific markers for growth factor-modified hydrogels, thus demonstrating their functional bioactivity. Our results demonstrate the fundamental potential of such multi-component polysaccharide hydrogel composites as biomaterials for bone regeneration.

New insights into an innovative Auricularia auricular polysaccharide pH-sensitive hydrogel for controlled protein drug delivery

An innovative pH-sensitive Auricularia auricular polysaccharide hydrogel was developed for effective controlled protein delivery for the first time.

Directional control of diffusion and swelling in megamolecular polysaccharide hydrogels.

Directional control of diffusion and swelling in megamolecular polysaccharide hydrogels is demonstrated by focusing on the anisotropic structures for water absorption. Due to the presence of a layered structure in the hydrogel, the directional control for diffusion parallel to the planar direction and swelling in the lateral direction are possible.

Controlling the rheology of gellan gum hydrogels in cell culture conditions

Successful culturing of tissues within polysaccharide hydrogels is reliant upon specific mechanical properties. Namely, the stiffness and elasticity of the gel have been shown to have a profound effect on cell behaviour in 3D cell cultures and correctly tuning these mechanical properties is critical to the success of culture. The usual way of tuning mechanical properties of a hydrogel to suit tissue engineering applications is to change the concentration of polymer or its cross-linking agents. In this study sonication applied at various amplitudes was used to control mechanical properties of gellan gum solutions and gels. This method enables the stiffness and elasticity of gellan gum hydrogels cross-linked with DMEM to be controlled without changing either polymer concentration or cross-linker concentration. Controlling the mechanical behaviour of gellan hydrogels impacted upon the activity of alkaline phosphatase (ALP) in encapsulated MC3T3 pre-osteoblasts. This shows the potential of applying a simple technique to generate hydrogels where tissue-specific mechanical properties can be produced that subsequently influence cell behaviour.

UTILISATION DU PERICARDE AUTOLOGUE TRAITE PAR UN POLYMERE D’HYDROGEL DANS LA RECONSTRUCTION VALVULAIRE AORTIQUE : ETUDE DE FAISABILITE CHEz LE MOUTON

The choice of valvular substitute poses numerous challenges particular in the children. The use of the patient own pericardium for constructing heart valve prosthesis is an interesting alternative and has several potential advantages: there is no immune reaction between the host and the implanted valve and their low cost is an attractive solution for patients in the developing countries. The aim of our study is to focus and evaluate technical aspects of construction and implantation of autologous pericardium prosthesis prétraited with polysaccharide gel. Five (5) sheep underwent aortic valve replacement with autologous pericardium prosthesis according to Goetz’s technique using cardiopulmonary bypass. The heart was exposed with a standard left thoracotomy through the 4th intercostal space. Cardiopulmonary bypass and cross-clamp mean time was 145 min and 79 min respectively. The prosthesis mean time construction and surgical implantation was 14 and 49 min respectively. Echocardiograhic study showed trivial central regurgitation in 2 cases. Two sheep died owing myocardial failure at the end of the procedure. Truly stenless aortic valve replacement using autologous pericardium pretraited with a polysaccharide hydrogel is feasible, with cross clamping time acceptable and without precoce structural dégénération. Histological results are particulary useful to evaluate this new method for pericardial valvular implant using polysaccharid gel. Keywords: Aortic valve, autologous pericardium, hydrogel, experimental study, in vivo.

Progress in Polysaccharide/Zeolites and Polysaccharide Hydrogel Composite Sorbents and Their Applications in Removal of Heavy Metal Ions and Dyes

Design of composite biosorbents based either on polysaccharides as biopolymer matrix embedded with natural or synthetic zeolites or composite hydrogels having polysaccharides as one component and their applications in sorption processes of heavy metal ions and dyes has been reviewed based on the most recent publications in the field. It was demonstrated that polysaccharide-zeolite composites exhibit higher performance in sorption of environmental pollutants comparative with natural or synthetic zeolites or pristine biopolymers. The polysaccharide-zeolite composites are economically feasible because they are easy to prepare and involve inexpensive chemical reagents, which are coming from renewable resources. On the other hand, the polysaccharide based composite hydrogels present stiffer and tougher mechanical properties and more efficient sorption/desorption properties compared to conventional hydrogels. Interpenetrating polymer network composite hydrogels based on chitosan, alginate, starch, cellulose, and other polysaccharides, reported mainly in the last decade, and their sorption properties for heavy metal ions and dyes are discussed in this review. Keywords: Chitosan, clinoptilolite, dyes, heavy metals, hydrogels, potato starch, sorption.

Hyaluronic acid concentration-mediated changes in structure and function of porous carriers for corneal endothelial cell sheet delivery

In this study, the effects of hyaluronic acid (HA) concentrations (0.05–1.25wt.%) on the properties of porous carriers for corneal endothelial tissue engineering were investigated. The pore size and porosity gradually increased with decreasing solid content. However, at relatively low HA concentration (i.e., 0.05wt.%), the material samples contained small interior pores and a dense surface skin layer, probably due to no gas bubble effect on the stirring processing of porous microstructures of freeze-dried polysaccharide hydrogels. The carriers prepared from 0.25wt.% HA solution had the highest freezable water content and oxygen and glucose permeability among the samples evaluated. Results of cell viability assays and quantitative real-time reverse transcription polymerase chain reaction analyses showed that the HA concentration-related alteration of porous microstructure dictates the compatibility of biopolymer carriers with corneal endothelial cell (CEC) cultures. In vivo studies demonstrated that the CEC sheet/HA carrier construct implants are therapeutically efficacious in the reconstruction of endothelial scrape-wounded corneas. It is concluded that the polysaccharide concentration is the major factor for affecting the processing of carriers and their structure and function. Porous hydrogels prepared from 0.25wt.% HA solution are capable of delivering bioengineered CEC sheets to the posterior surface of cornea.

From macro to nano polysaccharide hydrogels: An opportunity for the delivery of drugs

This overview follows the evolution of the studies carried out, mainly during last years, on polysaccharide hydrogels, with particular attention on the researches carried out in our department, often in collaboration with other groups in our country and abroad. The review points out the importance of this type of networks for the optimization of drug delivery and targeting in the various forms of macro, micro and nano systems. It is also shown that these materials are suitable for the culture of different types of cells. Release mechanisms are reported and explained by different physico-chemical approaches and by means of molecular dynamics simulations and the anomalous swelling behavior of a scleroglucan/borax hydrogel is thoroughly discussed. The role of polymer combinations forming interpenetrated structures is explained in terms of specific properties which significantly differ from those of the constituent polymers, thus allowing appropriate tailoring of the delivery rates. Finally the wide possibilities of applications of nanogel structures which allow combination therapies for cancer treatment and can be suitable for intracellular targeting are reported. The studies on polysaccharide hydrogels are still in progress and it is underlined that future researches, more focused on the passage from lab to market, should be further stimulated.

Alginate–hyaluronan composite hydrogels accelerate wound healing process

In this paper we propose polysaccharide hydrogels combining alginate (ALG) and hyaluronan (HA) as biofunctional platform for dermal wound repair. Hydrogels produced by internal gelation were homogeneous and easy to handle. Rheological evaluation of gelation kinetics of ALG/HA mixtures at different ratios allowed understanding the HA effect on ALG cross-linking process. Disk-shaped hydrogels, at different ALG/HA ratio, were characterized for morphology, homogeneity and mechanical properties. Results suggest that, although the presence of HA does significantly slow down gelation kinetics, the concentration of cross-links reached at the end of gelation is scarcely affected. The in vitro activity of ALG/HA dressings was tested on adipose derived multipotent adult stem cells (Ad-MSC) and an immortalized keratinocyte cell line (HaCaT). Hydrogels did not interfere with cell viability in both cells lines, but significantly promoted gap closure in a scratch assay at early (1 day) and late (5 days) stages as compared to hydrogels made of ALG alone (p<0.01 and 0.001 for Ad-MSC and HaCaT, respectively). In vivo wound healing studies, conducted on a rat model of excised wound indicated that after 5 days ALG/HA hydrogels significantly promoted wound closure as compared to ALG ones (p<0.001). Overall results demonstrate that the integration of HA in a physically cross-linked ALG hydrogel can be a versatile strategy to promote wound healing that can be easily translated in a clinical setting.

On the Mechanism of Drug Release from Polysaccharide Hydrogels Cross-Linked with Magnetite Nanoparticles by Applying Alternating Magnetic Fields: the Case of DOXO Delivery.

The chemical, biological and physical properties of carboxymethylcellulose (CMC) hydrogels with silanized magnetite (Fe3O4) nanoparticles (NPs) as cross-linker were investigated and compared with the analogous hydrogel obtained by using 1,3-diaminopropane (DAP) as cross-linker. The magnetic hydrogel was characterized from the chemical point of view by FT-IR, whereas the morphology of the hydrogel was investigated by FESEM and STEM. The water uptake and rheological measurements reveal how much the swelling and mechanical properties change when CMC is cross-linked with silanized magnetite NPs instead of with DAP. As far as the biological properties, the hybrid hydrogel neither exerts any adverse effect nor any alteration on the cells. The magnetic hydrogels show magnetic hysteresis at 2.5 K as well as at 300 K. Magnetic measurements show that the saturation magnetization, remanent magnetization and coercive field of the NPs are not influenced significantly by the silanization treatment. The magnetic hydrogel was tested as controlled drug delivery system. The release of DOXO from the hydrogel is significantly enhanced by exposing it to an alternating magnetic field. Under our experimental conditions (2 mT and 40 kHz), no temperature increase of the hydrogel was measured, testifying that the mechanism for the enhancement of drug release under the AMF involves the twisting of the polymeric chains. A static magnetic field (0.5 T) does not influence the drug release from the hydrogel, compared with that without magnetic field.

In vitro and in vivo application of pH-sensitive colon-targeting polysaccharide hydrogel used for ulcerative colitis therapy

The aim of this study was to prepare, characterize novel types of pH-sensitive konjac gum–xanthan gum–glycerol–sodium alginate hydrogel (KGM–XG–GLY–SA hydrogel) allowing for the site-specific delivering of drugs to the colon and evaluate its colon-targeting characteristic. In this study, hydrophilic drug of hydrocortisone sodium succinate (HSS) was chosen as a model drug and successfully loaded in hydrogel without any organic solvent. In vitro investigations were carried out to evaluate its release process. The drug-loaded hydrogel shown good sustained release property that drugs release from test hydrogel was minimal at pH 1.2 (2h, 23.40%), pH 6.8 (4h, 25.88%), and significantly higher (4h, 70.20%) at pH 7.4. It is clear that adding glycerol in hydrogel as hysteresis preparation prevented the rapid dissolution of material in the higher pH of the intestine. Thus ensuring a controlled release of the entrapped drug. We studied the colonic-targeting behavior, in vivo toxicity test, pharmacokinetic study, features to reduce drug toxicity, and therapeutic effect of experimental UC of this preparation. All the results in vitro were shown that the K (KGM–XG–GLY–SA) hydrogels with glycerol had a good colon-targeting characteristic. In addition, results in vivo were indicated that K (KGM–XG–GLY–SA) hydrogel were nontoxic, reduced the spleen and thymus index, and had an obvious effect on the treatment of UC. Therefore, all results suggested that the developed HSS/KGM–XG–GLY–SA hydrogel (HSS-GEL) with glycerol as a colon-targeting vector might have greatly potential application in the UC healing.

Cytocompatible in situ forming chitosan/hyaluronan hydrogels via a metal-free click chemistry for soft tissue engineering

Injectable hydrogels are important cell scaffolding materials for tissue engineering and regenerative medicine. Here, we report a new class of biocompatible and biodegradable polysaccharide hydrogels derived from chitosan and hyaluronan via a metal-free click chemistry, without the addition of copper catalyst. For the metal-free click reaction, chitosan and hyaluronan were modified with oxanorbornadiene (OB) and 11-azido-3,6,9-trioxaundecan-1-amine (AA), respectively. The gelation is attributed to the triazole ring formation between OB and azido groups of polysaccharide derivatives. The molecular structures were verified by FT–IR spectroscopy and elemental analysis, giving substitution degrees of 58% and 47% for chitosan-OB and hyaluronan-AA, respectively. The in vitro gelation, morphologies, equilibrium swelling, compressive modulus and degradation of the composite hydrogels were examined. The potential of the metal-free hydrogel as a cell scaffold was demonstrated by encapsulation of human adipose-derived stem cells (ASCs) within the gel matrix in vitro. Cell culture showed that this metal-free hydrogel could support survival and proliferation of ASCs. A preliminary in vivo study demonstrated the usefulness of the hydrogel as an injectable scaffold for adipose tissue engineering. These characteristics provide a potential opportunity to use the metal-free click chemistry in preparation of biocompatible hydrogels for soft tissue engineering applications.

Polysaccharide hydrogel combined with mesenchymal stem cells promotes the healing of corneal alkali burn in rats.

Corneal chemical burns are common ophthalmic injuries that may result in permanent visual impairment. Although significant advances have been achieved on the treatment of such cases, the structural and functional restoration of a chemical burn-injured cornea remains challenging. The applications of polysaccharide hydrogel and subconjunctival injection of mesenchymal stem cells (MSCs) have been reported to promote the healing of corneal wounds. In this study, polysaccharide was extracted from Hardy Orchid and mesenchymal stem cells (MSCs) were derived from Sprague-Dawley rats. Supplementation of the polysaccharide significantly enhanced the migration rate of primarily cultured rat corneal epithelial cells. We examined the therapeutic effects of polysaccharide in conjunction with MSCs application on the healing of corneal alkali burns in rats. Compared with either treatment alone, the combination strategy resulted in significantly better recovery of corneal epithelium and reduction in inflammation, neovascularization and opacity of healed cornea. Polysaccharide and MSCs acted additively to increase the expression of anti-inflammatory cytokine (TGF-β), antiangiogenic cytokine (TSP-1) and decrease those promoting inflammation (TNF-α), chemotaxis (MIP-1α and MCP-1) and angiogenesis (VEGF and MMP-2). This study provided evidence that Hardy Orchid derived polysaccharide and MSCs are safe and effective treatments for corneal alkali burns and that their benefits are additive when used in combination. We concluded that combination therapy with polysaccharide and MSCs is a promising clinical treatment for corneal alkali burns and may be applicable for other types of corneal disorder.

Type, density, and presentation of grafted adhesion peptides on polysaccharide-based hydrogels control preosteoblast behavior and differentiation.

In this work, cell-responsive polysaccharide hydrogels were prepared by a simple procedure based on the sequential bioconjugation and cross-linking of the polysaccharide backbone with bioactive peptides and poly(ethylene glycol)-bis(thiol) (PEG-(SH)2), respectively. Using thiol-ene reactions, we successfully functionalized hyaluronic acid (HA) and carboxymethylcellulose (CMC) with short and long peptides (5-mer and 15-mer derivatives, respectively) derived from adhesive proteins of bone extracellular matrix. The resulting HA-peptide and CMC-peptide conjugates with varying degrees of substitution were then carefully characterized by (1)H NMR spectroscopy to precisely control the peptide density into the hydrogels cross-linked with PEG-(SH)2. Preosteoblast seeded on the hydrogels with controlled identical stiffness spread in a manner that was strongly dependent on ligand density. Surprisingly, increasing the density of the adhesive peptide anchors did not result in a plateau of initial cell spreading but rather in a bell-shaped cell response that varies with the nature of both polysaccharide backbone and functional peptide. Placing the cells under optimal conditions for cell/hydrogel interaction, we showed that in HA hydrogels, the polysaccharide moiety is not solely a passive scaffold that presents the active peptides but is an active player in cell microenvironment to control and sustain cell activity.