Polypeptide Backbone Research Articles

A further insight into the biosorption mechanism of Au(III) by infrared spectrometry

BackgroundThe interactions of microbes with metal ions form an important basis for our study of biotechnological applications. Despite the recent progress in studying some properties of Au(III) adsorption and reduction by Bacillus megatherium D01 biomass, there is still a need for additional data on the molecular mechanisms of biosorbents responsible for their interactions with Au(III) to have a further insight and to make a better exposition.ResultsThe biosorption mechanism of Au(III) onto the resting cell of Bacillus megatherium D01 biomass on a molecular level has been further studied here. The infrared (IR) spectroscopy on D01 biomass and that binding Au(III) demonstrates that the molecular recognition of and binding to Au(III) appear to occur mostly with oxygenous- and nitrogenous-active groups of polysaccharides and proteins in cell wall biopolymers, such as hydroxyl of saccharides, carboxylate anion of amino-acid residues (side-chains of polypeptide backbone), peptide bond (amide I and amide II bands), etc.; and that the active groups must serve as nucleation sites for Au(0) nuclei growth. A further investigation on the interactions of each of the soluble hydrolysates of D01, Bacillus licheniformis R08, Lactobacillus sp. strain A09 and waste Saccharomyces cerevisiae biomasses with Au(III) by IR spectrometry clearly reveals an essential biomacromolecule-characteristic that seems the binding of Au(III) to the oxygen of the peptide bond has caused a significant, molecular conformation-rearrangement in polypeptide backbones from β-pleated sheet to α-helices and/or β-turns of protein secondary structure; and that this changing appears to be accompanied by the occurrence, in the peptide bond, of much unbound -C=O and H-N- groups, being freed from the inter-molecular hydrogen-bonding of the β-pleated sheet and carried on the helical forms, as well as by the alternation in side chain steric positions of protein primary structure. This might be reasonably expected to result in higher-affinity interactions of peptide bond and side chains with Au(III).ConclusionsThe evidence suggests that the polypeptides appear to be activated by the intervention of Au(III) via the molecular reconformation and in turn react upon Au(III) actively and exert profound impacts on the course of Au(0) nucleation and crystal growth.

Structural basis for a [4Fe-3S] cluster in the oxygen-tolerant membrane-bound [NiFe]-hydrogenase

Membrane-bound respiratory [NiFe]-hydrogenase (MBH), a H(2)-uptake enzyme found in the periplasmic space of bacteria, catalyses the oxidation of dihydrogen: H(2) → 2H(+) + 2e(-) (ref. 1). In contrast to the well-studied O(2)-sensitive [NiFe]-hydrogenases (referred to as the standard enzymes), MBH has an O(2)-tolerant H(2) oxidation activity; however, the mechanism of O(2) tolerance is unclear. Here we report the crystal structures of Hydrogenovibrio marinus MBH in three different redox conditions at resolutions between 1.18 and 1.32 Å. We find that the proximal iron-sulphur (Fe-S) cluster of MBH has a [4Fe-3S] structure coordinated by six cysteine residues--in contrast to the [4Fe-4S] cubane structure coordinated by four cysteine residues found in the proximal Fe-S cluster of the standard enzymes--and that an amide nitrogen of the polypeptide backbone is deprotonated and additionally coordinates the cluster when chemically oxidized, thus stabilizing the superoxidized state of the cluster. The structure of MBH is very similar to that of the O(2)-sensitive standard enzymes except for the proximal Fe-S cluster. Our results give a reasonable explanation why the O(2) tolerance of MBH is attributable to the unique proximal Fe-S cluster; we propose that the cluster is not only a component of the electron transfer for the catalytic cycle, but that it also donates two electrons and one proton crucial for the appropriate reduction of O(2) in preventing the formation of an unready, inactive state of the enzyme.

Contribution of Disulfide Bonds to Stability, Folding, and Amyloid Fibril Formation: The PI3-SH3 Domain Case

The failure of proteins to fold or to remain folded very often leads to their deposition into amyloid fibrils and is the origin of a variety of human diseases. Accordingly, mutations that destabilize the native conformation are associated with pathological phenotypes in several protein models. Protein backbone cyclization by disulfide bond crosslinking strongly reduces the entropy of the unfolded state and, usually, increases protein stability. The effect of protein cyclization on the thermodynamic and kinetics of folding has been extensively studied, but little is know on its effect on aggregation reactions. The SRC homology 3 domain (SH3) of p85α subunit of bovine phosphatidyl-inositol-3'-kinase (PI3-SH3) domain is a small globular protein, whose folding and amyloid properties are well characterized. Here we describe the effect of polypeptide backbone cyclization on both processes. We show that a cyclized PI3-SH3 variant is more stable, folds faster, aggregates slower, and forms conformationally and functionally different amyloid fibrils than the wild-type domain. Disulfide bridges may act as key molecular determinants of both productive protein folding and deleterious aggregation reactions.

Immunohistochemical localization and characterization of distinct angiotensin II AT1 and AT2 receptor isoforms in the adrenal glands of the Sprague-Dawley rat and the desert rodent Meriones crassus

Employing specific polyclonal anti-AT1 and anti-AT2 antibodies, AT1 and AT2 receptor expression was immunohistochemically demonstrable within adrenal tissues in Sprague-Dawley rats and the desert rodent Meriones crassus. Among adrenal cortical zones in rats, AT1 receptor labeling was evident in zona glomerulosa and zona reticularis. In contrast, AT1 receptor labeling was confined to the zona glomerulosa and the deep zona fasiculata in Meriones crassus. AT1 receptor labeling was, however, equally observed among ganglion and chromaffin cells constituting the adrenal medulla of both animal models. AT2 receptor labeling was faint in all adrenal regions in rats. However, intensity was high in the deep zona fasiculata, and medullary chromaffin and ganglion cells in Meriones crassus. Two-dimensional Western blotting, in the presence or absence of endoglycosidase-F, revealed that structurally distinct spectra of AT1 and AT2 receptor isoforms are expressed in the adrenal tissues of each animal model. These spectra were constituted by molecular isoforms with distinct patterns of charge microheterogeneity unique to each receptor type in each animal model. In both species, heterogeneity of AT1 and AT2 receptor isoforms may be attributed in part to differential post-translational glycosylation mechanisms of the receptor polypeptide backbones, which may be critical in differentially fine-tuning adrenal functions in lab-reared and desert rodents. Key words: Angiotensin II receptors, adrenal gland, desert rodents, N –linked glycosylation, immunohistochemistry.

Potential Induced Changes in Neuromedin B Adsorption on Ag, Au, and Cu Electrodes Monitored by Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS), electrochemistry, and generalized two-dimensional correlation analysis (G2DCA) methods were used to define neuromedin B (NMB) ordered superstructures on Ag, Au, and Cu electrode surfaces at different applied electrode potentials in an aqueous solution at physiological pH. The orientation of NMB and the adsorption mechanism were determined based on the analysis of enhancement, broadness, and shift in wavenumber of particular bands, which allow drawing some conclusions about NMB geometry and changes in this geometry upon change of the electrode type and applied electrode potential. The presented data demonstrated that NMB deposited onto the Ag, Au, and Cu electrode surfaces showed bands due to vibrations of the moieties that were in contact/close proximity to the electrode surfaces and thus were located on the same side of the polypeptide backbone. These included the Phe(9) and Trp(4) rings, the sulfur atom of Met(10), and the -CCN- and -C═O units of Asn(2). However, some subtle variations in the arrangement of these fragments upon changes in the applied electrode potential were distinguished. The Amide-III vibrations exhibited an electrochemical Stark effect (potential dependent frequencies) with Stark tuning slope sensitive to the electrode material. Potential-difference spectrum revealed that the imidazole ring of His(8) was bonded to the Cu electrode surface at relatively positive potentials.

Fungal recognition is mediated by the association of dectin-1 and galectin-3 in macrophages

Dectin-1, the major β-glucan receptor in leukocytes, triggers an effective immune response upon fungal recognition. Here we use sortase-mediated transpeptidation, a technique that allows placement of a variety of probes on a polypeptide backbone, to monitor the behavior of labeled functional dectin-1 in live cells with and without fungal challenge. Installation of probes on dectin-1 by sortagging permitted highly specific visualization of functional protein on the cell surface and its subsequent internalization upon ligand presentation. Retrieval of sortagged dectin-1 expressed in macrophages uncovered a unique interaction between dectin-1 and galectin-3 that functions in the proinflammatory response of macrophages to pathogenic fungi. When macrophages expressing dectin-1 are exposed to Candida albicans mutants with increased exposure of β-glucan, the loss of galectin-3 dramatically accentuates the failure to trigger an appropriate TNF-α response.

Structural Basis of the Anti-HIV Activity of the Cyanobacterial Oscillatoria Agardhii Agglutinin

The cyanobacterial Oscillatory Agardhii agglutinin (OAA) is a recently discovered HIV-inactivating lectin that interacts with high-mannose sugars. Nuclear magnetic resonance (NMR) binding studies between OAA and α3,α6-mannopentaose (Manα(1-3)[Manα(1-3)[Manα(1-6)]Manα(1-6)]Man), the branched core unit of Man-9, revealed two binding sites at opposite ends of the protein, exhibiting essentially identical affinities. Atomic details of the specific protein-sugar contacts in the recognition loops of OAA were delineated in the high-resolution crystal structures of free and glycan-complexed protein. No major changes in the overall protein structure are induced by carbohydrate binding, with essentially identical apo- and sugar-bound conformations in binding site 1. A single peptide bond flip at W77-G78 is seen in binding site 2. Our combined NMR and crystallographic results provide structural insights into the mechanism by which OAA specifically recognizes the branched Man-9 core, distinctly different from the recognition of the D1 and D3 arms at the nonreducing end of high-mannose carbohydrates by other antiviral lectins.

A photoswitchable orange-to-far-red fluorescent protein, PSmOrange

We report a monomeric PSmOrange protein that is initially orange (excitation and emission at 548 and 565 nm) but becomes far-red (excitation and emission at 636 and 662 nm) after irradiation with blue-green light. Compared to its parental orange proteins, PSmOrange has greater brightness, faster maturation, higher photoconversion contrast, and better photostability. The red-shifted spectra of both forms of PSmOrange enable its simultaneous use with cyan-to-green photoswitchable proteins to study four intracellular populations. Photoconverted PSmOrange has, to date, the most far-red excitation peak, provides diffraction-limited and super-resolution imaging in far-red range, is optimally excited with common red lasers, and can be photoconverted subcutaneously in a mouse. PSmOrange photoswitching occurs via a two-step photo-oxidation process, which causes cleavage of the polypeptide backbone. The far-red fluorescence of photoconverted PSmOrange results from a novel chromophore containing N-acylimine with a coplanar carbon-oxygen double bond.

Solution NMR structure of MED25(391–543) comprising the activator-interacting domain (ACID) of human mediator subunit 25

The solution NMR structure of protein MED25(391-543), comprising the activator interacting domain (ACID) of subunit 25 of the human mediator, is presented along with the measurement of polypeptide backbone heteronuclear 15N-{1H} NOEs to identify fast internal motional modes. This domain interacts with the acidic transactivation domains of Herpes simplex type 1 (HSV-1) protein VP16 and the Varicella-zoster virus (VZV) major transactivator protein IE62, which initiate transcription of viral genes. The structure is similar to the β-barrel domains of the human protein Ku and the SPOC domain of human protein SHARP, and provides a starting point to understand the structural biology of initiation of HSV-1 and VZV gene activation. Homology models built for the two ACID domains of the prostate tumor overexpressed (PTOV1) protein using the structure of MED25(391-543) as a template suggest that differential biological activities of the ACID domains in MED25 and PTOV1 arise from modulation of quite similar protein-protein interactions by variable residues grouped around highly conserved charged surface areas.

Antibody Recognition of a Human Chorionic Gonadotropin Epitope (hCGβ66–80) Depends on Local Structure Retained in the Free Peptide

Human chorionic gonadotropin (hCG) is an important biomarker in pregnancy and oncology, where it is routinely detected and quantified by specific immunoassays. Intelligent epitope selection is essential to achieving the required assay performance. We present binding affinity measurements demonstrating that a typical β3-loop-specific monoclonal antibody (8G5) is highly selective in competitive immunoassays and distinguishes between hCGβ(66-80) and the closely related luteinizing hormone (LH) fragment LHβ(86-100), which differ only by a single amino acid residue. A combination of optical spectroscopic measurements and atomistic computer simulations on these free peptides reveals differences in turn type stabilized by specific hydrogen bonding motifs. We propose that these structural differences are the basis for the observed selectivity in the full protein.

Protein stabilization in a highly knotted protein polymer.

The polypeptide backbones of a few proteins are tied in a knot. The biophysical effects and potential biological roles of knots are not well understood. Here, we test the consequences of protein knotting by taking a monomeric protein, carbonic anhydrase II, whose native structure contains a shallow knot, and polymerizing it end-to-end to form a deeply and multiply knotted polymeric filament. Thermal stability experiments show that the polymer is stabilized against loss of structure and aggregation by the presence of deep knots.

The Structure of Neurexin 1α Reveals Features Promoting a Role as Synaptic Organizer

α-neurexins are essential synaptic adhesion molecules implicated in autism spectrum disorder and schizophrenia. The α-neurexin extracellular domain consists of six LNS domains interspersed by three EGF-like repeats and interacts with many different proteins in the synaptic cleft. To understand how α-neurexins might function as synaptic organizers, we solved the structure of the neurexin 1α extracellular domain (n1α) to 2.65 Å. The L-shaped molecule can be divided into a flexible repeat I (LNS1-EGF-A-LNS2), a rigid horseshoe-shaped repeat II (LNS3-EGF-B-LNS4) with structural similarity to so-called reelin repeats, and an extended repeat III (LNS5-EGF-B-LNS6) with controlled flexibility. A 2.95 Å structure of n1α carrying splice insert SS#3 in LNS4 reveals that SS#3 protrudes as a loop and does not alter the rigid arrangement of repeat II. The global architecture imposed by conserved structural features enables α-neurexins to recruit and organize proteins in distinct and variable ways, influenced by splicing, thereby promoting synaptic function.

DNA Binding Restricts the Intrinsic Conformational Flexibility of Methyl CpG Binding Protein 2 (MeCP2)

Mass spectrometry-based hydrogen/deuterium exchange (H/DX) has been used to define the polypeptide backbone dynamics of full-length methyl CpG binding protein 2 (MeCP2) when free in solution and when bound to unmethylated and methylated DNA. Essentially the entire MeCP2 polypeptide chain underwent H/DX at rates faster than could be measured (i.e. complete exchange in ≤10 s), with the exception of the methyl DNA binding domain (MBD). Even the H/DX of the MBD was rapid compared with that of a typical globular protein. Thus, there is no single tertiary structure of MeCP2. Rather, the full-length protein rapidly samples many different conformations when free in solution. When MeCP2 binds to unmethylated DNA, H/DX is slowed several orders of magnitude throughout the MBD. Binding of MeCP2 to methylated DNA led to additional minor H/DX protection, and only locally within the N-terminal portion of the MBD. H/DX also was used to examine the structural dynamics of the isolated MBD carrying three frequent mutations associated with Rett syndrome. The effects of the mutations ranged from very little (R106W) to a substantial increase in conformational sampling (F155S). Our H/DX results have yielded fine resolution mapping of the structure of full-length MeCP2 in the absence and presence of DNA, provided a biochemical basis for understanding MeCP2 function in normal cells, and predicted potential approaches for the treatment of a subset of RTT cases caused by point mutations that destabilize the MBD.

Backbone assignment of the tyrosine kinase Src catalytic domain in complex with imatinib

The Src tyrosine kinase is the paradigm of an oncogenic kinase, and of regulation by intramolecular inhibitory interactions, as well as an important anticancer target due to its roles in cell proliferation and metastasis. The assignment of backbone (1)H(N), (13)C(α), (13)CO, and (15)N, and sidechain (13)C(β) resonances of the catalytic domain of Src (283 residues) in complex with the anticancer drug Imatinib is reported here. Consistent with previous X-ray studies of the same complex, most signals from the activation loop are not detected, indicating that, even in the presence of the drug, it probably adopts highly heterogeneous conformations in intermediate exchange. For the rest of the polypeptide backbone, assignments have been completed for ~88% of residues, with only a few solvent-exposed amides remaining unassigned.

Reagentless fluorescent biosensors from artificial families of antigen binding proteins

Antibodies and artificial families of antigen binding proteins (AgBP) are constituted by a connected set of hypervariable (or randomized) residue positions, supported by a constant polypeptide backbone. The residues that form the binding site for a given antigen, are selected among the hypervariable residues. We showed that it is possible to transform any AgBP of these families into a reagentless fluorescent biosensor, specific of the target antigen, simply by coupling a solvatochromic fluorophore to one of the hypervariable residues that have little or no importance for the interaction with the antigen, after changing this residue into cysteine by mutagenesis. We validated this approach with a DARPin (Designed Ankyrin Repeat Protein) and a Nanofitin (also known as Affitin) with high success rates. Reagentless fluorescent biosensors recognize their antigen in an immediate, quantitative, selective and specific way, without any manipulation of the sample to analyze or addition of reagent.

Thiol-based redox signalling: Rust never sleeps

Cysteine residues in proteins are covalently modified under conditions of oxidative and nitrosative stress by oxidation, nitrosation, glutathionylation and disulfide formation. Modifications induce conformational changes in substrate proteins, effecting signal cascades that evoke a biological response. A growing number of structures with modified cysteines are allowing a piecemeal understanding of the mechanistic aspects of these signalling pathways to emerge. Conformational changes upon conjugation of nitric oxide and glutathione are generally small and often accompanied by a local increase in protein disorder. Burial of nitric oxide is also apparent, which may increase the timeframe of signalling. Conformational changes upon disulfide formation/reduction range from the small to the spectacular. They include order/disorder transitions; oxidation of disulfides following expulsion of metals such as Zn; major reorganisation or “morphing” of portions of the polypeptide backbone; and changes in quaternary structure including domain swapping.

Anchored clathrate waters bind antifreeze proteins to ice.

The mechanism by which antifreeze proteins (AFPs) irreversibly bind to ice has not yet been resolved. The ice-binding site of an AFP is relatively hydrophobic, but also contains many potential hydrogen bond donors/acceptors. The extent to which hydrogen bonding and the hydrophobic effect contribute to ice binding has been debated for over 30 years. Here we have elucidated the ice-binding mechanism through solving the first crystal structure of an Antarctic bacterial AFP. This 34-kDa domain, the largest AFP structure determined to date, folds as a Ca(2+)-bound parallel beta-helix with an extensive array of ice-like surface waters that are anchored via hydrogen bonds directly to the polypeptide backbone and adjacent side chains. These bound waters make an excellent three-dimensional match to both the primary prism and basal planes of ice and in effect provide an extensive X-ray crystallographic picture of the AFPice interaction. This unobstructed view, free from crystal-packing artefacts, shows the contributions of both the hydrophobic effect and hydrogen bonding during AFP adsorption to ice. We term this mode of binding the "anchored clathrate" mechanism of AFP action.

Enzymatic degradation of the hydrogels based on synthetic poly(α-amino acid)s

Biodegradable hydrogels are studied as potential scaffolds for soft tissue regeneration. In this work biodegradable hydrogels were prepared from synthetic poly(α-amino acid)s, poly(AA)s. The covalently crosslinked gels were formed by radical copolymerization of methacryloylated poly(AA)s, e.g. poly[N (5)-(2-hydroxy-ethyl)-L-glutamine-ran-L-alanine-ran-N (6)-methacryloyl-L-lysine], as a multifunctional macro-monomer with a low-molecular-weight methacrylic monofunctional monomer, e.g. 2-hydroxyethyl methacrylate (HEMA). Methacryloylated copolypeptides were synthesized by polymerization of N-carboxyanhydrides of respective amino acids and subsequent side-chain modification. Due to their polypeptide backbone, synthetic poly(AA)s are cleavable in biological environment by enzyme-catalyzed hydrolysis. The feasibility of enzymatic degradation of poly(AA)s alone and the hydrogels made from them was studied using elastase, a matrix proteinase involved in tissue healing processes, as a model enzyme. Specificity of elastase for cleavage of polypeptide chains behind the L-alanine residues was reflected in faster degradation of L-alanine-containing copolymers as well as of hydrogels composed of them.

The refined structure of functional unit h of keyhole limpet hemocyanin (KLH1‐h) reveals disulfide bridges

Hemocyanins are multimeric oxygen-transport proteins in the hemolymph of many arthropods and mollusks. The overall molecular architecture of arthropod and molluscan hemocyanin is very different, although they possess a similar binuclear type 3 copper center to bind oxygen in a side-on conformation. Gastropod hemocyanin is a 35 nm cylindrical didecamer (2 × 10-mer) based on a 400 kDa subunit. The latter is subdivided into eight paralogous "functional units" (FU-a to FU-h), each with an active site. FU-a to FU-f contribute to the cylinder wall, whereas FU-g and FU-h form the internal collar complex. Atomic structures of FU-e and FU-g, and a 9 Å cryoEM structure of the 8 MDa didecamer are available. Recently, the structure of keyhole limpet hemocyanin FU-h (KLH1-h) was presented as a C(α) -trace at 4 Å resolution. Unlike the other seven FU types, FU-h contains an additional C-terminal domain with a cupredoxin-like fold. Because of the resolution limit of 4 Å, in some loops, the course of the protein backbone could not be established with high certainty yet. Here, we present a refined atomic structure of FU-h (KLH1-h) obtained from low-resolution refinement, which unambiguously establishes the course of the polypeptide backbone and reveals the disulfide bridges as well as the orientation of bulky amino acids.

Core−Shell Molecular Bottlebrushes with Helical Polypeptide Backbone: Synthesis, Characterization, and Solution Conformations

A series of core−shell molecular bottlebrushes with helical polypeptide backbone and polylactide-b-poly(ethylene glycol) block copolymer side chains [PPLG-g-(PLA-b-PEG)] have been synthesized via a grafting-to method. The structurally well-defined side chains with low molecular weight distribution (PDI < 1.03) have been synthesized by ring-opening polymerization (ROP) of dl-lactides using PEG-OH macroinitiator and AlEt3 catalyst. Postpolymerization modification by esterification enables the quantitative installation of an alkynyl functionality at the block polymer chain ends. Grafting of alkynyl-terminated PLA-b-PEG onto poly(γ-azidopropyl-l-glutamate) (PAPLG) via copper-mediated [2 + 3] alkyne−azide 1,3-dipolar cycloaddition yields the targeted molecular bottlebrushes with high grafting density under mild conditions. A combination of the Langmuir−Blodgett (LB) technique with atomic force microscopy (AFM) has allowed for direct imaging of the synthesized molecular brushes and characterization of their mol...