Polymerization Catalysts Research Articles

Triptycene as a scaffold in metallocene catalyzed olefin polymerization.

A set of metallocene olefin polymerization catalysts bearing triptycene moieties in either position 4-5 (complexes Ty1-Ty5) or in position 5-6 (complexes Ty6-Ty8) of the basic dimethylsilyl-bridged bis(indenyl) system has been tested in propene polymerization and in ethene/1-hexene copolymerization. Comparison of the results with QSPR (quantitative structure-property relationship) predictions not parametrized for these exotic ligand variations demonstrates that trends can still be identified by extrapolation. Interestingly, Ty7, upon suitable activation, provides a highly isotactic polypropylene with an exceptional amount of 2,1 regio-errors (8%). The previously developed QSPR type models successfully predicted the low regioselectivity of this catalyst, despite the fact that the catalyst structure differs significantly from the benchmark set.

2D ZIF-L(Zn) for Hybrid Copolymerization of Methyl Methacrylate and ε-Caprolactone under Solvent-free Medium

Herein, we report the hybrid copolymerization of methyl methacrylate (MMA) and ε-caprolactone (CL). 2D metal-organic frameworks, ZIF-L as a robust polymerization catalyst, can catalyze this hybrid copolymerization. Though these monomers differ from each other in structure and activity, different characterization techniques (1H-NMR, 13C-NMR, GPC, DSC, fractional precipitation techniques) confirm that they form biodegradable block copolymer PMMA-b-PCL with high molecular weight (1190 kg/mol). Also, PXRD and SEM results of the recovered ZIF-L reveal that the catalyst ZIF-L is remarkably stable even after a long-time polymerization reaction with no significant loss in activity.

Horseradish peroxidase-catalyzed polyacrylamide gels: monitoring their polymerization with BSA-stabilized gold nanoclusters and their functional validation in electrophoresis.

Polyacrylamide gel (PAG) is extensively used as a matrix for biomolecular analysis and fractionation. However, the traditional polymerization catalyst system N,N,N',N'-tetramethylethylenediamine (TEMED)/ammonium persulphate (APS) of PAG presents non-negligible toxicity. Herein, we utilized the green and efficient bio-enzyme horseradish peroxidase (HRP) to catalyze the gel polymerization of polyacrylamide. At the same time, the efficacy of this gel system in separating nucleic acids and proteins was confirmed by applying the gel system in electrophoresis. This study aims to explore a higher biosafety polyacrylamide gel polymerization catalytic system which can be applied to electrophoresis technology. Furthermore, in order to differentiate between the bio-enzymatic catalytic system and the traditional toxic catalytic system during polymerization, aggregation-induced luminescence (AIE) of bovine serum albumin-stabilized gold nanoclusters (BSA-Au NCs) was used to monitor the polymerization reaction of the system. The results indicated that the fluorescence intensity of the polymeric system containing BSA-Au NCs increased with the polymerization of the monomers. Subsequently, we assessed whether certain components of nucleic acid electrophoresis and protein electrophoresis such as sodiumdodecylsulfate (SDS) and TBE buffer (Tris-boric acid, EDTA, pH 8.3) would affect the polymerization of the polyacrylamide gels catalyzed by the biological enzymes. The experimental conditions were also optimized to explore the optimal concentration of the ternary system of HRP, H2O2 and ACAC. Our results suggested that the bioenzyme-catalyzed system could be a feasible alternative to the TEMED/APS-catalyzed system, which also could provide new insights into the methods of monitoring the polymerization system.

Sulfonated porous organic polymer supported Ziegler-Natta catalysts for the synthesis of ultra-high molecular weight polyethylene.

Porous organic polymers (POPs) are attracting attention for their easy functionalization and potential as catalyst supports in olefin polymerization. In this study, sulfonated POP (s-POP) supported Ziegler-Natta catalysts were used for ethylene polymerization, producing ultra-high molecular weight polyethylene, with M ν reaching up to 6.83 × 106 g mol-1. The maximum M ν of polyethylene was achieved by Cat-3 with DIBP as the internal donor, albeit with a partial loss of catalytic activity. Polymerization conditions also play a pivotal role in determining the molecular weight of polyethylene. Hydrogen, being the most efficient chain transfer agent, can decrease the molecular weight to 9.68 × 104 g mol-1 at higher hydrogen concentrations ([H2] : [C2H4] = 0.83), and the s-POP-supported ethylene polymerization catalysts were observed to exhibit high sensitivity to hydrogen response. The effects of polymerization temperature, [Al] : [Ti] molar ratio, and ethylene pressure on ethylene polymerization were thoroughly investigated.

Molecular field analysis in half-titanocene complexes: computational study towards data-driven in silico optimization of single-site olefin polymerization catalysts

The control of multiple reaction outcomes in olefin polymerization has been demonstrated through data-driven catalyst optimization based on molecular field analysis, using data collected from DFT-based transition-state calculations.

Influence of strong π-acceptor ligands on Cr-K-edge X-ray absorption spectral signatures and consequences for the interpretation of surface sites in the Phillips catalyst.

X-ray absorption spectroscopy (XAS) has been central to the study of the Phillips polymerization catalyst (CrO3/SiO2). As Cr K-edge XAS signatures are sensitive to the oxidation state, geometry and types of ligands on surface (active) sites, the superposition of these effects makes their interpretation challenging. Notably, CO has been particularly used as a reductant to generate low valent Cr sites from CrO3/SiO2 and as a structural IR probe for analysing reduced Cr surface sites. Hence, it is essential to establish a solid understanding of the spectroscopic impact of CO on low-valent Cr sites. We thus built a series of fully characterized low-valent Cr molecular compounds bearing isoelectronic isocyanide ligands in place of CO, with the goal of understanding the effect of the coordination of π-acceptor ligands on the XANES signature of Cr sites. Cr K-edge spectra supplemented with DFT calculations elucidate the effect of the coordination of π-acceptor ligands on XAS signatures, giving a sharp resonance at the white line while modifying the fine structure due to short Cr-C distances and stability of low-spin Cr(ii/iii) species. The isocyanide references allow the deconvolution of the XAS spectra of the reduced CrO3/SiO2 catalyst by evaluating the types of surface species and relative amounts of bound CO at different CO pressures and temperatures.

Insertion of CO2 to 2-methyl furoate promoted by a cobalt hypercrosslinked polymer catalyst to obtain a monomer of CO2-based biopolyesters

2,5-Furan Dicarboxylic methyl Ester (FDME), a highly valued monomer for the synthesis of biobased polyesters, has been prepared through a new synthetic strategy that consists of the direct carboxylation of...

Snapshot of cyclooctyne ring-opening to a tethered alkylidene cyclic polymer catalyst.

Cyclooctyne reacts with the trianionic pincer ligand supported alkylidyne [ t BuOCO]WCC(CH3)3(THF)2 (1) to yield tungstacyclopropene (3) and tungstacyclopentadiene (4) complexes. The ratio of 3 and 4 in the reaction mixture depends on the stoichiometry of the reaction. The maximum concentration of 3 occurs with one equiv. of cyclooctyne and 4 is the exclusive product of the reaction above three equivalents. Both complexes 3 and 4 convert to the cyclooctyne ring-opened product 5 upon heating. While the conversion of 4 to 5 is accompanied by formation of polycyclooctyne as a white precipitate during the reaction, conversion of 3 to 5 is homogeneous. Exhibiting Ring Expansion Polymerization (REP), complexes 4 and 5 initiate the polymerization of phenylacetylene to generate cyclic poly(phenylacetylene) (c-PPA).

Synthesis of Poly(δ-caprolactone) via Bis(phenolate) Rare-Earth Metal Complexes Mediated Ring-Opening Polymerization and Its Chemical Recycling.

New amine-amino-bis(phenolate) ligands (H2LtBu and H2LCl) with a cyclic tertiary amine (pyrrolidine) as a side arm and tBu or Cl group on the phenolate ring have been prepared. The alkane elimination reaction between these free ligands and rare-earth tris(alkyl)s Ln(CH2SiMe3)3(THF)2 afforded the corresponding silylalkyl complexes LtBuLnCH2SiMe3(THF) (Ln = Y (1), Lu (2)) and LClYCH2SiMe3(THF) (3), where the solid-state structure of complex 1 was unambiguously confirmed by X-ray diffraction (XRD) analysis. These rare-earth metal complexes have been utilized as catalysts for the ring-opening polymerization (ROP) of biobased δ-caprolactone (δCL), either in the absence or presence of alcohols, to give poly(δ-caprolactone) (PδCL) with controlled molecular weight and narrow distribution (Đ < 1.2). The polymerization kinetics of δCL in toluene with yttrium complexes 1 and 3 were investigated. Oligomers prepared with complex 3 alone and the 3/PhCHMeOH binary catalyst system were well characterized with 1H NMR spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS). Moreover, chemical recycling of the resultant PδCL was achieved with high yield in a solution at ambient temperature (>92%) or in bulk at 130 °C (>82%) by using commercial KOtBu as a promotor.

Titanium and Vanadium Complexes of Tridentate Phenoxy-Imine and Phenoxy-Amine Ligands and Their Application in the Ring-Opening Polymerization of Cyclic Esters.

Phenoxy-imine and phenoxy-amine proligands, with the additional OH donor groups 2,4-tBu2-6-(2-CH2(OH)-C6H4N=CH)C6H3OH (L1H2), 6-(2-CH2(OH)-C6H4N=CH)C6H3OH (L2H2), and 2,4-tBu2-6-(2-CH2(OH)-C6H4NH-CH)C6H3OH (L3H2), were synthesized and their titanium (Ti-L1-Ti-L3) and vanadium (V-L1-V-L2) complexes were prepared in reactions with Ti(OiPr)4 and VO(OiPr)3, respectively. All new compounds were characterized with the use of FTIR, 1H, and 13C NMR spectroscopy; X-ray crystallography was also used to study proligands. All the complexes proved to be active catalysts in the ring-opening polymerization (ROP) of ε-caprolactone, rac-lactide, and L-lactide in the melt. The effects of the complex structure (transition metal type, presence of tBu substituents, and type of nitrogen donor group), as well as the polymerization time and temperature, on the monomer conversion and polymer properties were investigated in detail.

Triazine‐based mesoporous organic polymers as palladium supports: physicochemical properties, porosity and catalytic performance in Suzuki coupling reaction

AbstractThis article reports the preparation of new mesoporous triazine‐based organic polymers and their characterization. The polymers were synthesized via a nucleophilic condensation reaction between cyanuric chloride and bisphenols or aromatic diamine linkers. As a result, two types of triazine‐based polymers were prepared: triazine‐ether and triazine‐amine polymers. The polymers reveal a mesoporous nature with surface area values ranging between 345 and 1275 m2 g−1 and mesopore volume between 0.273 and 1.03 cm3 g−1. These values were determined from argon gas isotherms at 87 K. The pore size distribution also confirmed the micro–mesoporosity, which reached up to 3.0 nm for all polymers. The triazine‐amine polymer shows good thermal oxidative stability up to 450 °C. Motivated by the mesopore size, the new polymers were also employed as palladium nanoparticle supports. The X‐ray diffraction technique indicated the successful incorporation of palladium nanoparticles, and Fourier transform infrared measurements proved that the framework of the polymers was retained after forming palladium supports. To ensure the catalytic reactivity of palladium nanoparticles, we employed one example as a catalyst in a Suzuki coupling reaction. The catalyst exhibited remarkable recyclability, maintaining catalytic efficiency through seven cycles, thereby enabling the use of palladium‐loaded triazine‐based polymeric catalysts in a variety of organic reactions in future. © 2023 Society of Industrial Chemistry.

Predicting the catalytic activities of transition metal (Cr, Fe, Co, Ni) complexes towards ethylene polymerization by machine learning.

The study aims to execute machine learning (ML) method for building an intelligent prediction system for catalytic activities of a relatively big dataset of 1056 transition metal complex precatalysts in ethylene polymerization. Among 14 different algorithms, the CatBoost ensemble model provides the best prediction with the correlation coefficient (R2 ) values of 0.999 for training set and 0.834 for external test set. The interpretation of the obtained model indicates that the catalytic activity is highly correlated with number of atom, conjugated degree in the ligand framework, and charge distributions. Correspondingly, 10 novel complexes are designed and predicted with higher catalytic activities. This work shows the potential application of the ML method as a high-precision tool for designing advanced catalysts for ethylene polymerization.

Latency for All: Enabling Latency of Hoveyda-Grubbs Second-Generation Catalysts by Adding Phosphite Ligands.

The Hoveyda-Grubbs catalyst (HG2, M720 Umicore) is among the most widely used catalysts in olefin metathesis reactions. Given the usefulness of HG2 and the great interest in developing latent olefin metathesis catalysts for numerous applications, we developed a method to introduce phosphite molecules as ancillary ligands into the precatalyst framework. This modification alters the geometry of the complex from an active trans-dichloro form to a latent cis-dichloro species. Most unusually, the ligands coordinate to HG2 only in solidified solutions (most likely due to entropic factors), providing latent catalysts that can be activated on demand by heat or light by regenerating the original HG2 catalyst. Of particular interest is the use of these latent catalysts in ring-opening metathesis polymerization (ROMP) reactions and 3D printing methods. Indeed, the novel complexes displayed the required latency toward ROMP monomers, even the most reactive dicyclopentadiene. Irradiation with 405 nm light readily results in the expedited formation of the desired polymers. This novel approach provides a general and straightforward way to access efficient and well-defined latent olefin metathesis catalysts.

Operando spectroscopies and heterogeneous olefin polymerization catalysis: A rare marriage with a lot of potential beyond usual understanding

This short review summarizes the main results achieved in the field of operando spectroscopies applied to heterogeneous catalysts for olefin polymerization. Following a chronological order, starting from the first spectroscopic measurements applied to the Phillips catalyst, the review retraces the main stages of this exciting story, reporting also some details on the experimental set-ups adopted from time to time, the difficulties encountered, the failures, and the solutions taken to address the problems. What emerges is a dynamic picture with still many unexplored potentialities, even though unfortunately limited to a few research groups systematically engaged in this field.

Transformation of Styrene into Biodegradable Polymer through In Situ Epoxidation-Copolymerization Using Tandem Polymeric Catalysts

Transformation of Styrene into Biodegradable Polymer through In Situ Epoxidation-Copolymerization Using Tandem Polymeric Catalysts

Enhanced Control of Isoprene Polymerization with Trialkyl Rare Earth Metal Complexes through Neutral Donor Support.

The development of catalysts for stereospecific polymerization of 1,3-dienes is an area of interest due to the robust nature of poly(1,3-diene)s' physical and mechanical properties, as well as the material's versatility in many applications. Dialkyl rare earth metal complexes supported by a diverse cast of ligand frameworks are selective for the polymerization of 1,3-dienes and are an exciting option for examination. However, development in this area has been hampered by the focus on complex catalyst systems that are costly to make. In this study, we synthesize a series of simple homoleptic trialkyl rare earth metal precatalysts and highlight their efficacy for isoprene polymerization using 1 or 2 equiv of [Ph3C][B(C6F5)4] activator. We investigated the addition of commercially available in situ donors, leading to the identification of triphenylphosphine as an ideal support to enhance the dispersity control and prevent loss of catalyst activity. We demonstrated how the activation and reaction conditions, including the order/time of reagent addition and donor electronics, had a major impact on the rate, control, and selectivity for the polymerization of 1,3-dienes. Further interrogation of the catalyst system signals the crucial role of triphenylphosphine in providing enhanced stability and control in this living catalyst system.

Copper-Metallized Porous N-Heterocyclic Carbene Ligand Polymer-Catalyzed Regio- and Stereoselective 1,2-Carboboration of Alkynes.

Alkenylboronates are highly versatile building blocks and valuable reagents in the synthesis of complex molecules. Compared with that of monosubstituted alkenylboronates, the synthesis of multisubstituted alkenylboronates is challenging. The copper-catalyzed carboboration of alkynes is an operationally simple and straightforward method for synthesizing bis/trisubstituted alkenylboronates. In this work, a series of copper-metallized N-Heterocyclic Carbene (NHC) ligand porous polymer catalysts are designed and synthesized in accordance with the mechanism of carboboration. By using CuCl@POL-NHC-Ph as the optimal nanocatalyst, this study realizes the β-regio- and stereoselective (syn-addition) 1,2-carboboration of alkynes (regioselectivity up to >99:1) with satisfactory yields and a wide range of substrates. This work not only overcomes the selectivity of carboboration but also provides a new strategy for the design of nanocatalysts and their application in organic synthesis.

Synthesis of dimethyl carbonate from CO2 catalyzed by spherical polymeric ionic liquid catalyst

Synthesis of dimethyl carbonate from CO2 catalyzed by spherical polymeric ionic liquid catalyst

Active Sites in Cr(III)-Based Ethylene Polymerization Catalysts from Machine-Learning-Supported XAS and EPR Spectroscopy.

The ethylene polymerization Phillips catalyst has been employed for decades and is central to the polymer industry. While Cr(III) alkyl species are proposed to be the propagating sites, there is so far no direct experimental evidence for such proposal. In this work, by coupling Surface organometallic chemistry, EPR spectroscopy, and machine learning-supported XAS studies, we have studied the electronic structure of well-defined silica-supported Cr(III) alkyls and identified the presence of several surface species in high and low-spin states, associated with different coordination environments. Notably, low-spin Cr(III) sites are shown to participate in ethylene polymerization, indicating that similar Cr(III) alkyl species could be involved in the related Phillips catalyst.

Active Sites in Cr(III)‐Based Ethylene Polymerization Catalysts from Machine‐Learning‐Supported XAS and EPR Spectroscopy**

AbstractThe ethylene polymerization Phillips catalyst has been employed for decades and is central to the polymer industry. While Cr(III) alkyl species are proposed to be the propagating sites, there is so far no direct experimental evidence for such proposal. In this work, by coupling Surface organometallic chemistry, EPR spectroscopy, and machine learning‐supported XAS studies, we have studied the electronic structure of well‐defined silica‐supported Cr(III) alkyls and identified the presence of several surface species in high and low‐spin states, associated with different coordination environments. Notably, low‐spin Cr(III) sites are shown to participate in ethylene polymerization, indicating that similar Cr(III) alkyl species could be involved in the related Phillips catalyst.