Polymeric Carriers Research Articles

Evaluation of Suitable Polymeric Matrix/Carriers during Loading of Poorly Water Soluble Drugs onto Mesoporous Silica: Physical Stability and In Vitro Supersaturation.

The application of mesoporous carriers in formulations of amorphous solid dispersions (ASDs) has been suggested to enhance the stability of amorphous drugs. However, mesoporous carriers do not demonstrate satisfactory inhibitory effects on the precipitation of active pharmaceutical ingredients (APIs), and the inclusion of an appropriate polymer within ASDs becomes imperative to maintaining drug supersaturation. The aim of this study was to evaluate ternary olanzapine (OLN) ASDs with Syloid 244FP and to find an appropriate polymeric carrier. The polymer's selection criteria were based on the physical stability of the ASDs and the release rate of the drug from the systems. The polymers investigated were hydroxypropylmethyl cellulose (HPMC) and copovidone (coPVP). The formation of ASDs was achievable in all investigated cases, as demonstrated by the complete lack of crystallinity confirmed through both powder X-ray diffraction (pXRD) analysis and differential scanning calorimetry (DSC) for all developed formulations. The solvent shift method was employed to evaluate the ability of the studied carriers to inhibit the precipitation of supersaturated OLN. coPVP emerged as a more suitable precipitation inhibitor compared with HPMC and Syloid 244 FP. Subsequently, in vitro dissolution studies under non-sink conditions revealed a higher degree of supersaturation in ternary systems where coPVP was used as a polymeric carrier, as these systems exhibited, under the examined conditions, up to a 2-fold increase in the released OLN compared with the pure crystalline drug. Moreover, stability studies conducted utilizing pXRD demonstrated that ternary formulations incorporating coPVP and Syloid 244 FP maintained stability for an extended period of 8 months. In contrast, binary systems exhibited a comparatively shorter stability duration, indicating the synergistic effect of coPVP and Syloid 244 FP on the physical stability of the amorphous API. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) studies showed that the development of stronger molecular interactions can be provided as an explanation for this synergistic effect, as the formation of robust H-bonds may be considered responsible for inhibiting the precipitation of the supersaturated API. Therefore, the incorporation of coPVP into OLN ASDs with Syloid 244 FP is considered a highly promising technique for increasing the degree of OLN supersaturation in in vitro dissolution studies and improving the stability of systems.

Development of quantum computational model for analysis of drug delivery: Loading of human beta-defensin 3 and mitoxantrone onto composite polymers

A molecular dynamics simulation study evaluated the co-loading of mitoxantrone (MTX) and human beta-defensin 3 (HBD3) on PLGA and chitosan chains. Simulations were performed on four different polymeric systems. Electrostatic and vdW interactions between MTX and HBD3 are examined. According to the obtained results, MTX strongly interacts with PLGA. In addition, HBD3 interacts strongly with CHI. Moreover, the radial distribution function (RDF) was estimated for the compounds. The structural changes of HBD3 and the interaction potentials were considered when selecting a suitable polymeric carrier for HBD3. For this purpose, HBD3 in a water medium was considered a reference system. RMSD, RMSF, radius of gyration, and the secondary structure of HBD3 were analyzed. According to the results, HBD3 has a secondary structure similar to water when adsorbed on 10C and 5PC. CHI could stabilize the structure of HBD3. 5PC (5 PLGA and 5 CHI chains) is suitable for co-loading MTX and HBD3. Polymeric carriers can be designed using these molecular results.

Nontoxic, Biodegradable Hyperbranched Poly(β-amino ester)s for Efficient siRNA Delivery and Gene Silencing.

RNA interference (RNAi)-mediated gene silencing is a promising therapeutic approach to treat various diseases, but safe and efficient delivery remains a major challenge to its clinical application. Non-viral gene vectors, such as poly(β-amino esters) (pBAEs), have emerged as a potential candidate due to their biodegradability, low toxicity profile, ease of synthesis, and high gene transfection efficiency for both DNA and siRNA delivery. However, achieving significant gene silencing using pBAEs often requires a large amount of polymer carrier (with polymer/siRNA weight ratio >100) or high siRNA dose (>100 nM), which might potentially exacerbate toxicity concerns during delivery. To overcome these barriers, we designed and optimized a series of hyperbranched pBAEs capable of efficiently condensing siRNA and achieving excellent silencing efficiency at a lower polymer/siRNA weight ratio (w/w) and siRNA dose. Through modulation of monomer combinations and branching density, we identified the top-performing hyperbranched pBAEs, named as h(A2B3)-1, which possess good siRNA condensation ability, low cytotoxicity, and high cellular uptake efficiency. Compared with Lipofectamine 2000, h(A2B3)-1 achieved lower cytotoxicity and higher siRNA silencing efficiency in HeLa cells at a polymer/siRNA weight ratio of 30 and 30 nM siRNA dose. Notably, h(A2B3)-1 enhanced the gene uptake in primary neural cells and effectively silenced the target gene in hard-to-transfect primary cortical neurons and oligodendrocyte progenitor cells, with gene knockdown efficiencies of 34.8 and 53.4% respectively. By incorporating a bioreducible disulfide compartment into the polymer backbone, the cytocompatibility of the h(A2B3)-1 was greatly enhanced while maintaining their good transfection efficiency. Together, the low cytotoxicity and high siRNA transfection efficiency of hyperbranched h(A2B3)-1 in this study demonstrated their great potential as a non-viral gene vector for efficient siRNA delivery and RNAi-mediated gene silencing. This provides valuable insight into the future development of safe and efficient non-viral siRNA delivery systems as well as their translation into clinical applications.

High loading of lipophilic compounds in mesoporous silica for improved solubility and dissolution performance

Loading poorly soluble active pharmaceutical ingredients (API) into mesoporous silica can enable API stabilization in non-crystalline form, which leads to improved dissolution. This is particularly beneficial for highly lipophilic APIs (log D7.4 > 8) as these drugs often exhibit limited solubility in dispersion forming carrier polymers, resulting in low drug load and reduced solid state stability. To overcome this challenge, we loaded the highly lipophilic natural products coenzyme Q10 (CoQ10) and astaxanthin (ASX), as well as the synthetic APIs probucol (PB) and lumefantrine (LU) into the mesoporous silica carriers Syloid® XDP 3050 and Silsol® 6035. All formulations were physically stable in their non-crystalline form and drug loads of up to 50 % were achieved. At increasing drug loads, a marked increase in equilibrium solubility of the active ingredients in biorelevant medium was detected, leading to improved performance during biorelevant biphasic dissolution studies (BiPHa + ). Particularly the natural products CoQ10 and ASX showed substantial benefits from being loaded into mesoporous carrier particles and clearly outperformed currently available commercial formulations. Performance differences between the model compounds could be explained by in silico calculations of the mixing enthalpy for drug and silica in combination with an experimental chromatographic method to estimate molecular interactions.

Design of polymeric carriers to enhance antimicrobial photodynamic inactivation

Mixed polymeric micelles are a promising tool for the design of nanocarriers with pharmaceutical properties. These micellar systems allow reversing numerous properties of lipophilic drugs. Particularly, when applied to transport photosensitizers (PSs), they give rise to a wide variety of nanophotosensitizers (nPSs). These compounds are used to inactivate numerous bacteria resistant to conventional antibiotics. This research proposes the development of new mixed micelles, with better properties than simple micelles, for the trapping of Neutral Red (NR) and its monobrominated derivative (NRBr). Based on the combination of Pluronic P-123 with Pluronic F-108, Pluronic L-61 and Tween 80, 15 binary micellar systems were obtained. These mixed micelles presented a single population of homogeneous particles, with a diameter less than 70 nm. Moreover, several mixed micelles show smaller CMC than the simple system. These properties are predictors of high micellar stability and good anti-dilution properties, favoring their drug delivery applications. For these reasons, were loaded with NR and NRBr, showing good encapsulation efficiency. The 30 new nPSs presented an adequate size for pharmaceutical use and markedly enhanced the photochemical reactivity of the free PSs. Many of the mixed micellar systems showed greater production of singlet oxygen than the simple micelles of Pluronic P-123. Furthermore, all micellar systems increased the chemical stability of NRBr, which degrades in pH 7.4 buffer solution. Finally, all nPSs presented greater phototoxic activity against methicillin-resistant Staphylococcus aureus than free PSs. The nPSs formed by P-123: F-108 (90:10) + NR, P-123: F-108 (90:10) + NRBr, P-123: L-61 (80:20) + NRBr and P −123: T80 (80:20) + NRBr caused greater photodynamic inactivation of the microorganism than simple P-123 micellar systems. These nPSs could be considered excellent candidates for application in the treatment of infections caused by bacteria resistant to antibiotics.

Closing the Gap between Experiment and Simulation─A Holistic Study on the Complexation of Small Interfering RNAs with Polyethylenimine.

Rational design is pivotal in the modern development of nucleic acid nanocarrier systems. With the rising prominence of polymeric materials as alternatives to lipid-based carriers, understanding their structure-function relationships becomes paramount. Here, we introduce a newly developed coarse-grained model of polyethylenimine (PEI) based on the Martini 3 force field. This model facilitates molecular dynamics simulations of true-sized PEI molecules, exemplified by molecules with molecular weights of 1.3, 5, 10, and 25 kDa, with degrees of branching between 50.0 and 61.5%. We employed this model to investigate the thermodynamics of small interfering RNA (siRNA) complexation with PEI. Our simulations underscore the pivotal role of electrostatic interactions in the complexation process. Thermodynamic analyses revealed a stronger binding affinity with increased protonation, notably in acidic (endosomal) pH, compared to neutral conditions. Furthermore, the molecular weight of PEI was found to be a critical determinant of binding dynamics: smaller PEI molecules closely enveloped the siRNA, whereas larger ones extended outward, facilitating the formation of complexes with multiple RNA molecules. Experimental validations, encompassing isothermal titration calorimetry and single-molecule fluorescence spectroscopy, aligned well with our computational predictions. Our findings not only validate the fidelity of our PEI model but also accentuate the importance of in silico data in the rational design of polymeric drug carriers. The synergy between computational predictions and experimental validations, as showcased here, signals a refined and precise approach to drug carrier design.

Fabrication of a Nanomagnetic Smart Polymer Carrier as a Potential Candidate for a Drug Delivery System

We developed an intelligent device capable of controlled release of anti-cancer drugs. The nano-carrier consists of two key components: firstly, magnetic nanoparticles were synthesized through co-precipitation and then functionalized for attaching anti-cancer drugs; secondly, a polymer (poly(N-isopropylacrylamide-co-acrylic acid)) sensitive to pH and temperature was synthesized and employed to encapsulate the drug-loaded magnetic nanoparticles. This responsive polymer exhibits a lower critical solution temperature (LCST) of 38.5 °C, indicating a phase transition behavior. Numerous techniques and analyses, including Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potentials, scanning electron microscope, and transmission electron microscopy, were employed to confirm the successful execution of the aforementioned process. In vitro release assessments of the anti-cancer drug, doxorubicin, were conducted across various media (pH 5–8 and temperatures ranging from 20 to 40 °C). The outcomes revealed higher drug releases at temperatures exceeding the LCST (40 °C) and at slightly acidic pH levels (5–5.3). Notably, compared to the effectiveness of the unloaded drug, the magnetic smart polymer loaded with DOX exhibited a more potent cytotoxic effect. Considering these results, this nano-carrier emerges as a promising candidate for targeted therapeutic delivery to cancerous tissues.

Nanomaterials for Ultrasound Imaging- Guided Sonodynamic Therapy.

Ultrasound examination is becoming the most popular medical imaging modality because of its low cost and high safety profile. Ultrasound contrast agents enhance the scattering of sound waves, which can improve the clarity and resolution of images. Nanoparticle Ultrasound contrast agents have the characteristics of a large specific surface area and a modifiable surface, which can increase drug loading capacity, prolong circulation time, and enable drug enrichment in specific organs or tissues. This leads to improved therapeutic effects and reducing toxic and side effects. Compared with traditional ultrasound contrast agents, Nano-ultrasound contrast agents overcome the limitation of imaging solely within blood vessels and facilitate imaging within tumor tissues, thereby extending the duration of enhanced imaging. Sonodynamic therapy is an emerging treatment method that has been developed rapidly in recent years, which has the advantages of noninvasive, high spatial and temporal resolution, and low toxicity and side effects. Sonodynamic therapy utilizes a sonosensitizer that, when excited by ultrasound at the tumor site, produces toxic reactive oxygen species, inducing apoptosis or necrosis in tumor cells. Ultrasound-guided sonodynamic therapy allows for real-time observation of lesions, is convenient and flexible, and is free of radiation exposure. With the use of nanomaterials as carriers, ultrasound-guided sonodynamic therapy has made significant strides. This study categorizes and summarizes the current research on acoustic sensitizer carrier materials, including carbon-based, silicon-based, peptide-based, iron-based, metal-organic frameworks, polymers, and liposomes. It concludes by highlighting the current challenges in the integration of ultrasound imaging with sonodynamic therapy and suggests future directions for clinical application development.

Abietic Acid as a Novel Agent against Ocular Biofilms: An In Vitro and Preliminary In Vivo Investigation.

Biofilm-related ocular infections can lead to vision loss and are difficult to treat with antibiotics due to challenges with application and increasing microbial resistance. In turn, the design and testing of new synthetic drugs is a time- and cost-consuming process. Therefore, in this work, for the first time, we assessed the in vitro efficacy of the plant-based abietic acid molecule, both alone and when introduced to a polymeric cellulose carrier, against biofilms formed by Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans in standard laboratory settings as well as in a self-designed setting using the topologically challenging surface of the artificial eye. These analyses were performed using the standard microdilution method, the biofilm-oriented antiseptic test (BOAT), a modified disk-diffusion method, and eyeball models. Additionally, we assessed the cytotoxicity of abietic acid against eukaryotic cell lines and its anti-staphylococcal efficacy in an in vivo model using Galleria mellonella larvae. We found that abietic acid was more effective against Staphylococcus than Pseudomonas (from two to four times, depending on the test applied) and that it was generally more effective against the tested bacteria (up to four times) than against the fungus C. albicans at concentrations non-cytotoxic to the eukaryotic cell lines and to G. mellonella (256 and 512 µg/mL, respectively). In the in vivo infection model, abietic acid effectively prevented the spread of staphylococcus throughout the larvae organisms, decreasing their lethality by up to 50%. These initial results obtained indicate promising features of abietic acid, which may potentially be applied to treat ocular infections caused by pathogenic biofilms, with higher efficiency manifested against bacterial than fungal biofilms.

PVP assisted sol-electrospraying, unlike sol electrospinning, yields highly pure rhombohedral zinc titanate particles that reduce 4-nitrophenol under visible light

This work demonstrates for the first time that switching from sol-electrospinning to sol-electrospraying using PVP as a carrier polymer leads to enhanced purity of rhombohedral zinc titanate (Rh-ZTO) after calcination. Unlike in sol-electrospinning, the purity systematically increases and crystallite size decreases as PVP concentration is increased in sol-electrospraying. 100% pure Rh-ZTO powders were prepared with PVP fraction of 31.25 wt%. After careful characterization by XRD, rheology, zeta potential measurements, and SEM, we conclude that the interaction of multipole moments of the incipient sol-clusters with the electrostatic field influences the purity. We propose that in electrospinning the sol clusters spatially separate to yield multiple crystalline phases whereas in electrospraying they intermix due to polymeric cages in droplets and yield a single crystalline phase. The highest purity samples were found to enhance photo-reduction of 4-nitrophenol in presence of visible light, with rate constant increasing from 0.000415 to 0.00104 min−1. This could result from complex formed between oxygen vacancy and the shallow donor states of Ti3+ as confirmed by DRS, XPS, and PL.

Antitumor effects of redox-responsive nanoparticles containing platinum（Ⅳ）in ovarian cancer

Objectives: To explore the antitumor effects of redox-responsive nanoparticles containing platinum(Ⅳ)-NP@Pt(Ⅳ) in ovarian cancer. Methods: Redox-responsive polymer carriers were synthesized. Polymer carriers and platinum(Ⅳ)-Pt(Ⅳ) can self-assemble into NP@Pt(Ⅳ). Inductively coupled plasma mass spectrometry was performed to detect the platinum release from NP@Pt(Ⅳ) in reducing environment and the platinum content in ovarian cancer cells ES2 treated with cisplatin, Pt(Ⅳ) and NP@Pt(Ⅳ). The proliferation ability of the ovarian cancer cells were detected by 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Cellular apoptosis was assessed by flow cytometry. Collection of primary ovarian cancer tissues from patients with primary high-grade serous ovarian cancer who were surgically treated at the Cancer Hospital of the Chinese Academy of Medical Sciences from October to December 2022. The high-grade serous ovarian cancer patient-derived xenograft (PDX) mice were intravenously injected with Cy7.5 labeled NP@Pt(Ⅳ) followed by in vivo imaging system. Mice were treated with PBS, cisplatin and NP@Pt(Ⅳ). Tumor volume and weight were measured in each group. Necrosis, apoptosis and cell proliferation of tumor tissues were detected by hematoxylin-eosin (HE) staining, TUNEL fluorescence staining and Ki-67 immunohistochemistry staining. Body weight and HE staining of heart, liver, spleen, lung and kidney of mice in each group were measured. Results: The platinum release of NP@Pt(Ⅳ) after 48 hours in reducing environment was 76.29%, which was significantly higher than that of 26.82% in non-reducing environment (P<0.001). The platinum content in ES2 cells after 4 hours and 7 hours of treatment with NP@Pt(Ⅳ) (308.59, 553.15 ng/million cells) were significantly higher than those of Pt(Ⅳ) (100.21, 180.31 ng/million cells) and cisplatin (43.36, 50.36 ng/million cells, P＜0.05). The half inhibitory concentrations of NP@Pt(Ⅳ) in ovarian cancer cells ES2, A2780, A2780DDP were 1.39, 1.42 and 4.62 μmol/L, respectively, which were lower than those of Pt(IV) (2.89, 7.27, and 16.74 μmol/L) and cisplatin (5.21, 11.85, and 71.98 μmol/L). The apoptosis rate of ES2 cells treated with NP@Pt(Ⅳ) was (33.91±3.80)%, which was significantly higher than that of Pt(Ⅳ) [(16.28±2.41)%] and cisplatin [(15.01±1.17)%, P＜0.05]. In high-grade serous ovarian cancer PDX model, targeted accumulation of Cy7.5 labeled NP@Pt(Ⅳ) at tumor tissue could be observed. After the treatment, the tumor volume of mice in NP@Pt(IV) group was (130±98) mm3, which was significantly lower than those in control group [(1 349±161) mm3, P<0.001] and cisplatin group [(715±293) mm3, P=0.026]. The tumor weight of mice in NP@Pt(IV) group was (0.17±0.09)g, which was significantly lower than those in control group [(1.55±0.11)g, P<0.001] and cisplatin group [(0.82±0.38)g, P=0.029]. The areas of tumor necrosis and apoptosis in mice treated with NP@Pt(Ⅳ) were higher than those in mice treated with cisplatin. Immunohistochemical staining revealed that there were low expressions of Ki-67 at tumor tissues of mice treated with NP@Pt(Ⅳ) compared with cisplatin. The change in body weight of mice in NP@Pt(Ⅳ) group was not significantly different from that of the control group [(18.56±2.04)g vs.(20.87±0.79)g, P=0.063]. Moreover, the major organs of the heart, liver, spleen, lung, and kidney were also normal by HE staining. Conclusion: Redox-responsive NP@Pt(Ⅳ), produced in this study can enhance the accumulation of cisplatin in ovarian cancer cells and improve the efficacy of ovarian cancer chemotherapy.

Ionic Liquid-Based Polymer Matrices for Single and Dual Drug Delivery: Impact of Structural Topology on Characteristics and In Vitro Delivery Efficiency.

Previously reported amphiphilic linear and graft copolymers, derived from the ionic liquid [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TMAMA_Cl‾), along with their conjugates obtained through modification either before or after polymerization with p-aminosalicylate anions (TMAMA_PAS‾), were employed as matrices in drug delivery systems (DDSs). Based on the counterion type in TMAMA units, they were categorized into single drug systems, manifesting as ionic polymers with chloride counterions and loaded isoniazid (ISO), and dual drug systems, featuring ISO loaded in self-assembled PAS conjugates. The amphiphilic nature of these copolymers was substantiated through the determination of the critical micelle concentration (CMC), revealing an increase in values post-ion exchange (from 0.011-0.063 mg/mL to 0.027-0.181 mg/mL). The self-assembling properties were favorable for ISO encapsulation, with drug loading content (DLC) ranging between 15 and 85% in both single and dual systems. In vitro studies indicated ISO release percentages between 16 and 61% and PAS release percentages between 20 and 98%. Basic cytotoxicity assessments using the 2,5-diphenyl-2H-tetrazolium bromide (MTT) test affirmed the non-toxicity of the studied systems toward human non-tumorigenic lung epithelial cell line (BEAS-2B) cell lines, particularly in the case of dual systems bearing both ISO and PAS simultaneously. These results confirmed the effectiveness of polymeric carriers in drug delivery, demonstrating their potential for co-delivery in combination therapy.

Physicochemical Features and Applicability of Newly Fabricated Phytopharmaceutical-Loaded Hydrogel Alginate Microcarriers with Viscoelastic Polyelectrolyte Coatings.

The design of novel polymeric carrier systems with functional coatings is of great interest for delivering various bioactive molecules. Microcapsules coated with polyelectrolyte (PE) films provide additional functionality and fine-tuning advantages essential for controlled drug release. We developed hydrogel microcarriers coated with functional PE films with encapsulated substances of natural origin, resveratrol (RES), curcumin (CUR), and epigallocatechin gallate (EGCG), which have cytotoxic and chemopreventive properties. Alginate (ALG) based microparticles were loaded with phytopharmaceuticals using the emulsification method, and then their surface was modified with PE coatings, such as chitosan (CHIT) or poly(allylamine hydrochloride) (PAH). The morphology and mean diameter of microcarriers were characterised by scanning electron microscopy, encapsulation efficiency was determined by UV-Vis spectroscopy, whereas the physicochemical properties of functional PE layers were studied using quartz crystal microbalance with dissipation monitoring and streaming potential measurements. The release profiles of active compounds from the hydrogel microparticles were described using the Peppas-Sahlin model. The cytotoxic effect of designed delivery systems was studied by evaluating their impact on the proliferation, mitochondrial metabolic function, and lipid peroxidation level of 5637 human bladder cancer cells. The present work demonstrates that the physicochemical and biological features of fabricated microcarriers can be controlled by the type of encapsulated anti-cancer agent and PE coating.

Multilevel categoric factorial design for optimization of raloxifene hydrochloride solid dispersion in PVP K30 by hot-melt extrusion technology

Raloxifene Hydrochloride (RLH) is a selective estrogen receptor modulator (SERM) used for the treatment and prevention of postmenopausal osteoporosis. This Active Pharmaceutical Ingredient (API) belongs to class II biopharmaceutics classification system (BCS) hence it is characterized by solubility-limited bioavailability. The goal of this study is to develop solid dispersion with improved dissolution properties, and enhanced bioavailability via hot-melt extrusion technology. The solid dispersions were made by blending RLH with polyvinylpyrrolidone and polyethylene oxide as polymeric carriers. Design of experiment (DOE) was employed to systematically assess the impact of the formulation variables and their interaction on the drug release profile. The HME conditions were optimized at 165 °C and 150 rpm, ensuring efficient processing. Our findings revealed that Tween 80 and Cremophor RH 40, at a 10 % w/w concentration, served as effective plasticizers for PVP K30. The formulation featuring the highest proportion of PVP K30 (80 % w/w) and Tween 80 as a surfactant exhibited remarkable enhancement of drug release, with over 80 % of the drug dissolving within 30 min and about 100 % within 60 min. The drug has transformed from the crystalline into the amorphous state as confirmed by Differential Scanning Calorimetry (DSC) and Powder X-Ray Diffraction (PXRD), The lead formulation met the USP acceptance criteria for content uniformity, and exhibited a substantial increase in solubility compared to the pure drug across various media.

Use of solid thermolytic salts to facilitate microwave-induced in situ amorphization

Moisture was frequently used as dielectric heating source in classical microwave-able systems to facilitate microwave-induced in situ amorphization, however such systems may face the potential of drug hydrolysis. In this study, solid thermolytic salts were proposed to function as moisture substitutes and their feasibility and impacts on microwave-induced in situ amorphization were investigated. It was found that NH4HCO3 was a promising solid alkaline salt to facilitate both microwave-induced in situ amorphization and in situ salt formation of acidic indomethacin (IND). Moreover, it could improve the chemical stability of the drug and the dissolution performance of compacts relative to classical moisture-based compacts upon microwaving. Further mechanistic study suggested that the in situ amorphization occurred prior to the in situ salt formation, especially in formulations with low drug loadings and high solid salt mass ratios. For compacts with low polymer ratios, in situ salt formation took place subsequently, where the previously amorphized IND within compacts could interact with the NH3 gas produced in situ by the decomposition of NH4HCO3 and form the ammonium IND salt. Microwaving time showed great impacts on the decomposition of NH4HCO3 and the in situ generation of water and NH3, which indirectly affected the amorphization and salt formation of IND. In comparison to the moisture-based systems, the NH4HCO3-based system showed a number of advantages, including the reduced potential of IND hydrolysis due to the absence of absorbed moisture, a wider category of applicable polymeric carriers other than hygroscopic polymers, and an increase in drug loading up to 50% (w/w).

NOVEL BIOMATERIAL ASSISTED DRUG DELIVERY SYSTEMS FOR THE MANAGEMENT OF ORAL DISEASES–FUTURE THERAPEUTIC APPROACHES

Oral health is integral to maintaining systemic health as the mouth and oral cavity connect our digestive system with the external environment. The incidence of oro-dental disorders has been emerging as a serious threat to the healthcare sector owing to the increasing complexity of oral microbiome. Conventional treatment modalities are often limited by drug resistance and unwanted inflammatory responses. Recently, therapeutic strategies that can reinstate microbial homeostasis in the oral microenvironment have been implicated in the management of odontogenic infections. Biomaterial-based drug delivery systems, including nanocarriers, dendrimers, hydrogels, oral thin films, oral patches, and other stimuli-responsive polymeric systems, facilitate targeted administration of antimicrobials and anti-inflammatory agents to the site of infection. Bio adhesivity of the polymeric carriers facilitates faster disintegration and accurate dosing of the pharmacological agent to the target site. Moreover, restorative dentistry has been revolutionized by the advent of bio-functional templates that offer improved osseointegration and long-term stability of implants. A comprehensive review of the potential applications of biomaterial-mediated therapeutic strategies in the management of caries, peri-implantitis, periodontitis, and other oro-dental infections is explored here.

Activated tyrosine kinase c‐Src‐responsive artificial gene carrier: in vitro and in vivo evaluation

AbstractThe proto‐oncogene c‐Src is a protein‐tyrosine kinase that is associated with increased risk of acute and chronic kidney diseases, cardiovascular diseases, neurological diseases, and cancers. The purpose of this study was to develop a gene delivery carrier responding to activated c‐Src and to evaluate its efficacy in vitro and in vivo. The polymeric gene carrier consists of a neutral main chain bearing a peptide substrate of c‐Src or negative control peptide. Complexes of the polymer containing c‐Src‐targeting peptides and DNA were phosphorylated in the presence of c‐Src, resulting in release of the DNA. Green fluorescent protein (GFP) expression was observed after microinjection of complexes of polymer containing c‐Src‐targeting peptides and GFP‐encoding DNA into A431 cells at the nitrogen/phosphate (N/P) ratio of 1.0. GFP was not expressed in cells microinjected with negative control polymer/DNA complex. Direct injection of complexes of polymer containing c‐Src‐targeting peptides and luciferase‐encoding DNA at N/P ratios of 1.0 and 2.0 into tumor‐bearing mice resulted in luciferase expression in A431 tumors but not in normal skin tissues. No luciferase expression was observed in A431 tumors or skin tissues after injection of control polymer/DNA complex. These results indicate that our gene delivery carrier enables activated c‐Src‐specific gene expression.

Novel Arena of Nanocosmetics: Applications and their Remarkable Contribution in the Management of Dermal Disorders, Topical Delivery, Future Trends and Challenges.

Nanocosmetics have attracted a considerable audience towards natural care due to their low cost, target-specific delivery, and reduced toxicity compared to chemical-based cosmetics. Nanofomulations, including nanoemulsions, nanotubes, and polymeric carriers, have become next-generation products explored for the multifaced applications of nanotechnology in skin care. The rise in the cosmetic industry demands innovative and personalized products designed using nanocarriers for better targeting and improving patient compliance. Furthermore, nanocosmetics increase the efficiency of skin permeation active ingredient entrapment, providing better UV protection. Moreover, it offers controlled drug release, targeting active sites and enhancing physical stability. Further, overcoming the drawback of penetration problems makes them sustainable formulations for precision medicine. Skincare nourishment with nanocosmetics using Indian spices helps to maintain, beautify, and rejuvenate human skin. Nanophytopharmaceuticals extracted from plants, including alkaloids, flavonoids, antioxidants, and volatile oils, are essential phyto-products for skin care. Nano herbals and nanocosmetics are a growing market and gift of nature that nourishes and cures skin ailments like acne, pemphigus, anti-aging, albinism, psoriasis, and fungal infections. The emerging concern is highlighted in the investigation of nanoformulation toxicity and safety concerns in skin care. Further, it helps to manifest research, development, and innovation in expanding the scope of herbal industries.

Polymeric Vehicles for Nucleic Acid Delivery: Enhancing the Therapeutic Efficacy and Cellular Uptake.

Therapeutic gene delivery may be facilitated by the use of polymeric carriers. When combined with nucleic acids to form nanoparticles or polyplexes, a variety of polymers may shield the cargo from in vivo breakdown and clearance while also making it easier for it to enter intracellular compartments. Polymer synthesis design choices result in a wide variety of compounds and vehicle compositions. Depending on the application, these characteristics may be changed to provide enhanced endosomal escape, longer-lasting distribution, or stronger connection with nucleic acid cargo and cells. Here, we outline current methods for delivering genes in preclinical and clinical settings using polymers. Significant therapeutic outcomes have previously been attained using genetic material- delivering polymer vehicles in both in-vitro and animal models. When combined with nucleic acids to form nanoparticles or polyplexes, a variety of polymers may shield the cargo from in vivo breakdown and clearance while also making it easier for it to enter intracellular compartments. Many innovative diagnoses for nucleic acids have been investigated and put through clinical assessment in the past 20 years. Polymer-based carriers have additional delivery issues due to their changes in method and place of biological action, as well as variances in biophysical characteristics. We cover recent custom polymeric carrier architectures that were tuned for nucleic acid payloads such genomemodifying nucleic acids, siRNA, microRNA, and plasmid DNA. In conclusion, the development of polymeric carriers for gene delivery holds promise for therapeutic applications. Through careful design and optimization, these carriers can overcome various challenges associated with nucleic acid delivery, offering new avenues for treating a wide range of diseases.

Platinum-based chemotherapy: trends in organic nanodelivery systems.

Despite the investment in platinum drugs research, cisplatin, carboplatin and oxaliplatin are still the only Pt-based compounds used as first line treatments for several cancers, with a few other compounds being approved for administration in some Asian countries. However, due to the severe and worldwide impact of oncological diseases, there is an urge for improved chemotherapeutic approaches. Furthermore, the pharmaceutical application of platinum complexes is hindered by their inherent toxicity and acquired resistance. Nanodelivery systems rose as a key strategy to overcome these challenges, with recognized versatility and ability towards improving the safety, bioavailability and efficacy of the available drugs. Among the known nanocarriers, organic systems have been widely applied, taking advantage of their potential as drug vehicles. Researchers have mainly focused on the development of lipidic and polymeric carriers, including supramolecular structures, with an overall improvement of encapsulated platinum complexes. Herein, an overview of recent trends and strategies is presented, with the main focus on the encapsulation of platinum compounds into organic nanocarriers, showcasing the evolution in the design and development of these promising systems. This comprehensive review highlights formulation methods as well as characterization procedures, providing insights that may be helpful for the development of novel platinum nanocarriers aiming at future pharmaceutical applications.