Polymerase Chain Reaction System Research Articles

DNA-MnO2 Nanoconjugates Investigation and Application for Electrochemical Polymerase Chain Reaction.

Manganese dioxide (MnO2) nanosheets are emerging for biomedical applications with excellent physical and chemical properties. Adsorption of DNA on MnO2 is important for biosensing, bioimaging, and therapy. Nevertheless, current fundamental understanding about the interaction is preliminary. Herein, UV-vis absorption spectra are applied to systematically explore the biointerfacial interaction between DNA and MnO2 with the factors of salt concentration, pH value, temperature, DNA concentration, and length. The results offer important fundamental insights into the investigation of DNA-MnO2 nanocomposites. Meanwhile, the optimal parameters are applied to construct a screen-printed electrode (SPE) modified with polymerase chain reaction (PCR) primer-decorated MnO2 nanosheets. An electrochemical PCR system is then developed for ultrasensitive detection of circulating tumor DNA (ctDNA). The limit of detection is determined to be 0.1 fM, and high selectivity is demonstrated. Combining the merits of SPE, DNA-MnO2 nanosheets, and an amplified reaction, this developed strategy shows great promise in bioanalysis, clinical disease diagnosis, and biomedicine applications.

A Thermocycler Using a Chip Resistor Heater and a Glass Microchip for a Portable and Rapid Microchip-Based PCR Device.

This study proposes a rapid and inexpensive thermocycler that enables rapid heating of samples using a thin glass chip and a cheap chip resistor to overcome the on-site diagnostic limitations of polymerase chain reaction (PCR). Microchip PCR devices have emerged to miniaturize conventional PCR systems and reduce operation time and cost. In general, PCR microchips require a thin-film heater fabricated through a semiconductor process, which is a complicated process, resulting in high costs. Therefore, this investigation substituted a general chip resistor for a thin-film heater. The proposed thermocycler consists of a compact glass microchip of 12.5 mm × 12.5 mm × 2 mm that could hold a 2 μL PCR sample and a surface-mounted chip resistor of 6432 size (6.4 mm × 3.2 mm). Improving heat transfer from the chip resistor heater to the PCR reaction chamber in the microchip was accomplished via the design and fabrication of a three-dimensional chip structure using selective laser-induced etching, a rapid prototyping technique that allowed to be embedded. The fabricated PCR microchip was combined with a thermistor temperature sensor, a blower fan, and a microcontroller. The assembled thermocycler could heat the sample at a maximum rate of 28.8 °C/s per second. When compared with a commercially available PCR apparatus running the same PCR protocol, the total PCR operating time with a DNA sample was reduced by about 20%.

Comparable Results of Helicobacter pylori Antibiotic Resistance Testing of Stools vs Gastric Biopsies Using Next-Generation Sequencing

Comparable Results of Helicobacter pylori Antibiotic Resistance Testing of Stools vs Gastric Biopsies Using Next-Generation Sequencing

Rapid membrane-based photothermal PCR for disease detection

The worldwide incidence of deadly infectious diseases has increased in recent years. Therefore, a rapid and accurate nucleic acid diagnostic system is in high demand. Polymerase chain reaction (PCR) is the standard method for amplifying and quantifying nucleic acid biomarkers for disease detection. Although several rapid PCR systems have been developed to overcome the limitations of conventional PCR, such as post-processing for analysis, complicated handling, and highly specialized instruments, a new PCR testing approach is still required. In this study, we developed a rapid membrane-based photothermal PCR that enables quantitative fluorescence detection. It requires no post-PCR procedures and provides user-friendly micro-scale solution control and sample loading. Au nanostructure was deposited on the reaction pad as a light-to-heat converter for PCR thermocycling. The automatically controlled 785 nm light source heated a solution in the reaction pad with photothermal effect. The temperature of the reaction solution, which was absorbed in a membrane, was cycled 25 times between 63 °C and 95 °C within 6 min with a photothermal cycler. The amplified samples on the membrane were then quantitatively analyzed by measuring the fluorescence signal of intercalating SYBR dye within 12 min. DNA samples extracted from Staphylococcus aureus and unpurified cells were amplified and analyzed. This membrane-based PCR approach can provide easy connectivity with various membrane-based sample pre-treatment processes, and therefore the proposed procedure could be used as the basis for an all-in-one molecular diagnosis platform. This simple, rapid, and sensitive PCR device could also serve as the basis for advanced molecular diagnostics.

SF-qPCR: Strand Displacement-Based Fast Quantitative Polymerase Chain Reaction.

Nucleic acid testing (NAT) is important for the identification and quantification of specific nucleic acid targets, both DNA and RNA, in life sciences and clinical diagnostics. Nucleic acid amplification can be a time-consuming step in NAT using the polymerase chain reaction (PCR) assay. Therefore, this study aimed to develop a simple method to reduce the amplification time while maintaining the PCR system. The three-step process of a general qPCR was reduced to a two-step process. The annealing/extension temperatures were increased to minimize the differences between the denaturation temperature and the annealing/extension temperatures. Subsequently, the time for each of these steps was reduced and, finally, the denaturation temperature was lowered. Taq polymerase was replaced with SD polymerase because it has strand displacement activity and is efficient in amplifying partial dsDNA at lower denaturation temperatures. In the two-step qPCR of genomic DNA using SD polymerase, the final conditions included an initial denaturation at 92 °C for 2 min, and 1 s at each cycling step with a denaturation temperature of 87 °C and an annealing/extension temperature of 72 °C. Amplification of the nucleocapsid (N) gene of SARS-CoV-2 RNA virus was evaluated at a template concentration as low as 10 copies. This method, named SF-qPCR (strand displacement-based fast quantitative polymerase chain reaction), can stably detect less than 10 copies of DNA and RNA within 25–40 min. This new protocol allows for sensitive and rapid detection of important DNA and RNA targets in clinical diagnosis.Supplementary InformationThe online version contains supplementary material available at 10.1007/s13206-021-00044-x.

Enhanced Taq Variant Enables Efficient Genome Editing Testing and Mutation Detection.

Detection of genome editing with quantitative polymerase chain reaction (PCR) primarily relies on and is limited by its ability to discriminate genome modification from the wild-type sequence. An enhanced DNA polymerase variant with superior specificity is needed for this application. Here, we perform semi-rational molecular evolution on full-length Taq polymerase to screen high-specific variants that meet the requirements of gene variation detection. We substituted each of the 40 polar amino acids in direct contact with the primer/template duplex and conducted extensive random mutagenesis to generate a Taq mutation library. Screening on a quantitative PCR system with insertion and deletion-containing templates identified a series of improved Taq variants. We demonstrate that the Taq388 variant bearing three amino acid substitutions, S577A, W645R, and I707V, has improved sensitivity to insertion and deletion-derived primer/template mismatch by a ΔCt value of 25-26 and is superior for application in evaluating CRISPR-Cas9 editing efficiency and single-cell clone genotyping. In addition, the Taq variant shows substantial potential for single-nucleotide polymorphism detection by means of allele-specific PCR because of its high sensitivity to mismatches.

A plasmonic gold nanofilm-based microfluidic chip for rapid and inexpensive droplet-based photonic PCR

Polymerase chain reaction (PCR) is a powerful tool for nucleic acid amplification and quantification. However, long thermocycling time is a major limitation of the commercial PCR devices in the point-of-care (POC). Herein, we have developed a rapid droplet-based photonic PCR (dpPCR) system, including a gold (Au) nanofilm-based microfluidic chip and a plasmonic photothermal cycler. The chip is fabricated by adding mineral oil to uncured polydimethylsiloxane (PDMS) to suppress droplet evaporation in PDMS microfluidic chips during PCR thermocycling. A PDMS to gold bonding technique using a double-sided adhesive tape is applied to enhance the bonding strength between the oil-added PDMS and the gold nanofilm. Moreover, the gold nanofilm excited by two light-emitting diodes (LEDs) from the top and bottom sides of the chip provides fast heating of the PCR sample to 230 °C within 100 s. Such a design enables 30 thermal cycles from 60 to 95 °C within 13 min with the average heating and cooling rates of 7.37 ± 0.27 °C/s and 1.91 ± 0.03 °C/s, respectively. The experimental results demonstrate successful PCR amplification of the alcohol oxidase (AOX) gene using the rapid plasmonic photothermal cycler and exhibit the great performance of the microfluidic chip for droplet-based PCR.

Real-time digital polymerase chain reaction (PCR) as a novel technology improves limit of detection for rare allele assays.

BackgroundTumor heterogeneity may lead to false negative test results for tissue biopsy-based companion diagnostic tests. Real-time polymerase chain reaction (PCR) and digital PCR assays are used to detect rare alleles in cell-free circulating DNA for liquid biopsies; however, those tests lack strong sensitivity at low allele frequencies. We show here a novel real-time digital PCR instrument that utilizes cycle-based amplification curves to further improve the sensitivity and quantification accuracy of digital PCR.MethodsThe novel real-time digital PCR instrument was compared to an endpoint digital PCR system to determine the sensitivity and quantification accuracy of both instruments. Samples were all thermal cycled on the real-time digital PCR instrument but were analyzed on both endpoint and real-time digital PCR instruments to compare the performance without introducing other variables. Contrived samples for epidermal growth factor receptor (EGFR) exon 19 deletion, T790M, and L858R point mutations as well as human epidermal growth factor receptor 2 (HER2) amplification were tested. Different mutant allele frequencies and wildtype to mutant gene copy number ratios were tested for EGFR and HER2, respectively.ResultsBy removing false positive datapoints using real-time amplification curves, real-time digital PCR improved sensitivity by lowering the baseline for wildtype samples. For EGFR 19del assay, samples with 2 or more fluorescein amidite (FAM) labeled positive wells are determined positive by real-time digital PCR, while a minimum of 5 FAM positive datapoints is needed by endpoint digital PCR. Improved limit of detection for EGFR 19del mutation was also observed. Real-time digital PCR also had better quantification accuracy and sensitivity, resulting in the mutant allele frequencies being closer to the expected values for all EGFR mutations, especially at very low allele frequencies. However, at high allele frequencies or for gene amplification assays, real-time digital PCR is comparable with endpoint digital PCR.ConclusionsThis novel technology with improved sensitivity is important and needed because it addresses current issues with liquid biopsy tests. Due to limited amounts of circulating tumor DNA (ctDNA) obtained for liquid biopsy tests, few copies of mutant alleles are expected. With the lower baseline of real-time digital PCR, false negative test results from tissue biopsy would be more effectively reduced, leading to more patients receiving the targeted therapy they need for better survival.

Development of Multiplex PCR Coupled DNA Chip Technology for Assessment of Endogenous and Exogenous Allergens in GM Soybean.

Allergenicity assessment of transgenic plants and foods is important for food safety, labeling regulations, and health protection. The aim of this study was to develop an effective multi-allergen diagnostic approach for transgenic soybean assessment. For this purpose, multiplex polymerase chain reaction (PCR) coupled with DNA chip technology was employed. The study was focused on the herbicide-resistant Roundup Ready soya (RRS) using a set of certified reference materials consisting of 0, 0.1%, 0.5%, and 10% RRS. Technically, the procedure included design of PCR primers and probes; genomic DNA extraction; development of uniplex and multiplex PCR systems; DNA analysis by agarose gel electrophoresis; microarray development, hybridization, and scanning. The use of the asymmetric multiplex PCR method is shown to be very efficient for DNA hybridization with biochip probes. We demonstrate that newly developed fourplex PCR methods coupled with DNA-biochips enable simultaneous identification of three major endogenous allergens, namely, Gly m Bd 28K, Gly m Bd 30K, and lectin, as well as exogenous 5-enolppyruvyl shikimate-phosphate synthase (epsps) expressed in herbicide-resistant roundup ready GMOs. The approach developed in this study can be used for accurate, cheap, and fast testing of food allergens.

Detection of Mycoplasma Contamination in Transplanted Retinal Cells by Rapid and Sensitive Polymerase Chain Reaction Test.

Contamination of cells/tissues by infectious pathogens (e.g., fungi, viruses, or bacteria, including mycoplasma) is a major problem in cell-based transplantation. In this study, we tested a polymerase chain reaction (PCR) method to provide rapid, simple, and sensitive detection of mycoplasma contamination in laboratory cultures for clinical use. This mycoplasma PCR system covers the Mycoplasma species (spp.) listed for testing in the 17th revision of the Japanese Pharmacopoeia, and we designed it for use in transplantable retinal cells. Here, we analyzed mycoplasma contamination in induced pluripotent stem cell (iPS cell)-derived transplantable retinal pigment epithelium (RPE) cells. In the spike tests to RPE cells with nine species of class Mollicutes bacteria, including seven Mycoplasma spp. and one of each Acholeplasma spp. and Ureaplasma spp., contamination at the concentration of 100 and 10 CFU/mL were detected with 100% probability in all cases, while 1 CFU/mL had a detection rate of 0–75%. DNA prepared from bacteria species other than class Mollicutes species was not detectable, indicating the specificity of this PCR. While iPS cells and iPS-RPE cells established in our laboratory were all negative by this PCR, some of the commercially available cell lines were positive. Cells for transplantation should never have infection, as once pathogens are implanted into the eyes, they can cause severe intraocular inflammation. Thus, it is imperative to monitor for infections in the transplants, although generally, mycoplasma infection is difficult to detect.

LoopTag FRET Probe System for Multiplex qPCR Detection of Borrelia Species.

Background: Laboratory diagnosis of Lyme borreliosis refers to some methods with known limitations. Molecular diagnostics using specific nucleic acid probes may overcome some of these limitations. Methods: We describe the novel reporter fluorescence real-time polymerase chain reaction (PCR) probe system LoopTag for detection of Borrelia species. Advantages of the LoopTag system include having cheap conventional fluorescence dyes, easy primer design, no restrictions for PCR product lengths, robustness, high sequence specificity, applicability for multiplex real-time PCRs, melting curve analysis (single nucleotide polymorphism analysis) over a large temperature range, high sensitivity, and easy adaptation of conventional PCRs. Results: Using the LoopTag probe system we were able to detect all nine tested European species belonging to the Borrelia burgdorferi (sensu lato) complex and differentiated them from relapsing fever Borrelia species. As few as 10 copies of Borrelia in one PCR reaction were detectable. Conclusion: We established a novel multiplex probe real-time PCR system, designated LoopTag, that is simple, robust, and incorporates melting curve analysis for the detection and in the differentiation of European species belonging to the Borrelia burgdorferi s.l. complex.

A series of simple detection systems for genetic variants of flavin-containing monooxygenase 3 (FMO3) with impaired function in Japanese subjects

Increasing numbers of single-nucleotide substitutions of the human flavin-containing monooxygenase 3 (FMO3) gene are being recorded in mega-databases. Phenotype–gene analyses revealed impaired FMO3 variants associated with the metabolic disorder trimethylaminuria. Here, a series of reliable FMO3 genotyping confirmation methods was assembled and developed for 45 impaired FMO3 variants, mainly found in Japanese populations, using singleplex or duplex polymerase chain reaction (PCR)–restriction fragment length polymorphism (RFLP) methods and singleplex, duplex, or tetraplex allele-specific PCR methods. Nine PCR-RFLP procedures with single restriction enzymes and fourteen duplex PCR-RFLP procedures (for p.Trp41Ter and p.Thr329Ala, p.Met66Val and p.Leu163Pro, p.Pro70Leu and p.Glu308Gly, p.Asn114Ser and p.Ser195Leu, p.Glu158Lys and p.Ile441Thr, p.Cys197Ter and p.Trp388Ter, p.Arg205Cys and p.Val257Met, p.Arg205His and p.Cys397Ser, p.Met211ArgfsTer10 and p.Arg492Trp, p.Arg223Gln and p.Leu473Pro, p.Met260Val and p.Thr488Ala, p.Tyr269His and p.Ala311Pro, p.Ser310Leu and p.Gly376Glu, and p.Gln470Ter and p.Arg500Ter) were newly established along with eight singleplex (for p.Pro153GlnfsTer14, p.Gly191Cys, p.Pro248Thr, p.Ile486Met, and p.Pro496Ser, among others), one duplex (p.Ile199Ser and p.Asp286Tyr), and one tetraplex (p.Ile7Thr, p.Val58Ile, p.Thr201Lys, and p.Gly421Val) allele-specific PCR systems. This series of systems should facilitate the easy detection in a clinical setting of FMO3 variants in Japanese subjects susceptible to low drug clearances or drug reactions possibly caused by impaired FMO3 function.

Specificities of multi-primer polymerase chain reaction optimization for the detection of infectious pneumonia agents in human

Objectives. The objectives of this work are the development of a multi-primer system based on the polymerase chain reaction (PCR) aimed at the simultaneous detection of six bacterial pathogens that cause human pneumonia and the determination of the parameters important for the optimization of this multi-primer system, including solid-phase PCR systems (biological microarrays).Methods. To determine the optimal parameters of the system, PCR methods were used in monoplex and multiplex formats.Results. Primers for Staphylococcus aureus, Pseudomonas aeruginosa, Haemophilus influenza, Legionella pneumophila, Klebsiella pneumoniae, and Streptococcus pneumoniae detection were designed, and the PCR cycling conditions were optimized. The patterns of primer design for solidphase PCR were revealed.Conclusions. The developed prototype of a system specifically identifies six clinically significant bacterial pathogens. It could be expanded for the analysis of viral and fungal pathogens and used in clinical diagnostics. A prototype of a system for pathogenic agent detection in the immobilized phase (biological microarray) was created.

Robustness of digital PCR and real‐time PCR against inhibitors in transgene detection for gene doping control in equestrian sports

Gene doping is a threat to fair competition in sports, both human and equestrian. One method of gene doping is to administer exogenous genetic materials, called transgenes, into the bodies of postnatal humans and horses. Polymerase chain reaction (PCR)-based transgene detection methods such as digital PCR and real-time PCR have been developed for gene doping testing in humans and horses. However, the significance of PCR inhibitors in gene doping testing has not been well evaluated. In this study, we evaluated the effects of PCR inhibitors on transgene detection using digital PCR and real-time PCR against gene doping. Digital PCR amplification was significantly inhibited by high concentrations of proteinase K (more than 0.1μg/μl), ethylenediaminetetraacetic acid (more than 5nmol/μl), and heparin (more than 0.05 unit/μl) but not by ethanol or genomic DNA. In addition, phenol affected droplet formation in the digital PCR amplification process. Real-time PCR amplification was inhibited by high concentrations of phenol (more than 1% v/v), proteinase K (more than 0.001 μg/μl), ethylenediaminetetraacetic acid (more than 1nmol/μl), heparin (more than 0.005 unit/μl), and genomic DNA (more than 51.9ng/μl) but not by ethanol. Although both PCR systems were inhibited by nearly the same substances, digital PCR was more robust than real-time PCR against the inhibitors. We believe that our findings are important for the development of better methods for transgene detection and prevention of false negative results in gene doping testing.

3' Tth Endonuclease Cleavage Polymerase Chain Reaction (3TEC-PCR) Technology for Single-Base-Specific Multiplex Pathogen Detection using a Two-Oligonucleotide System.

Polymerase chain reaction (PCR) is the standard in nucleic acid amplification technology for infectious disease pathogen detection and has been the primary diagnostic tool employed during the global COVID-19 pandemic. Various PCR technology adaptations, typically using two-oligonucleotide dye-binding methods or three-oligonucleotide hydrolysis probe systems, enable real-time multiplex target detection or single-base specificity for the identification of single-nucleotide polymorphisms (SNPs). A small number of two-oligonucleotide PCR systems facilitating both multiplex detection and SNP identification have been reported; however, these methods often have limitations in terms of target specificity, production of variable or false-positive results, and the requirement for extensive optimisation or post-amplification analysis. This study introduces 3′ Tth endonuclease cleavage PCR (3TEC-PCR), a two-oligonucleotide PCR system incorporating a modified primer/probe and a thermostable cleavage enzyme, Tth endonuclease IV, for real-time multiplex detection and SNP identification. Complete analytical specificity, low limits of detection, single-base specificity, and simultaneous multiple target detection have been demonstrated in this study using 3TEC-PCR to identify bacterial meningitis associated pathogens. This is the first report of a two-oligonucleotide, real-time multiplex PCR technology with single-base specificity using Tth endonuclease IV.

Association of interleukin-17A genetic polymorphisms with risk of asthma: A case-control study in Iraqi patients

Interleukin-17A (IL-17A) is pro-inflammatory cytokine that has been suggested to influence susceptibility to asthma. This study sought to explore serum level and three variants of IL17A gene (rs2275913 G/A, rs3819024 A/G and rs8193036 C/T) in Iraqi asthmatics to evaluate their association with susceptibility to disease. A case-control study was conducted on 104 asthmatics and 111 healthy controls. Serum level of IL-17A was determined with Enzyme linked-immunosorbent assay, while the ARMS-PCR method (tetra-primer-amplification-refractory-mutation system-polymerase chain reaction) was used for amplification and genotyping of IL17A variants. Median IL-17A level was significantly elevated in asthmatics compared to controls. Receiver operating characteristic curve analysis revealed that IL-17A was a significant predictor of asthma, and a very good area under curve was demonstrated. Logistic regression analysis revealed that allele and genotype frequencies of two variants (rs2275913 and rs8193036) showed significant differences between patients and controls. GA + AA and GA frequencies of rs2275913 variant were significantly increased in patients compared to controls. For rs8193036 variant, frequencies of T allele and CT genotype were significantly lower in patients than in controls. In conclusion, IL-17A was upregulated in sera of asthmatics. Moreover, the rs2275913 variant was associated with a higher risk of developing asthma, while the rs8193036 variant was possibly associated with protective effects.

A simple multiplex polymerase chain reaction assay for rapid identification of the common pathogenic dermatophytes: Trichophyton interdigitale, Trichophyton rubrum, and Epidermophyton floccosum.

Background and Purpose: The most common etiological agents of human dermatophytosis in various parts of the world are Trichophyton rubrum, Trichophyton interdigitale, and Epidermophyton floccosum. The main aim of this study was to design and evaluate a simple and straightforward multiplex polymerase chain reaction (PCR) assay for reliable identification/differentiation of these species in clinical isolates.Materials and Methods: The reliable sequences of several molecular targets of dermatophytes species were used to design a multiplex PCR for the identification of common pathogenic dermatophytes. The isolates and clinical specimens examined in this study included seven standard strains of dermatophytes, 101 isolates of dermatophytes and non-dermatophyte molds/yeasts which had already been identified by sequencing or PCR-restriction fragment length polymorphism (RFLP), and 155 clinical samples from patients suspected of cutaneous mycoses.Results: Species-specific primer pairs for T. rubrum and T. interdigitale/T. mentagrophytes were designed based on the sequence data of the translation elongation factor 1-alpha gene, and the primers for E. floccosum targeted the specific sequence of the internal transcribed spacer region (ITS). The multiplex PCR successfully detected T. rubrum, T. interdigitale/T. mentagrophytes, and E. floccosum strains that were identified by sequencing or PCR-RFLP. However, the primer pairs selected for T. interdigitale/T. mentagrophytes cross-reacted with Trichophyton tonsurans. In testing the PCR system directly for clinical samples, the proportion of positive multiplex PCR was higher than positive culture (68.1% vs. 55.4%, respectively). Conclusion: The multiplex assay could detect three common agents out of several causal agents of dermatophytosis, namely T. rubrum, T. interdigitale, and E. floccosum. Therefore, by adding pan-dermatophyte primers it can be used as a comprehensive detection/identification test.

A CRISPR/Cas9 eraser strategy for contamination-free PCR end-point detection.

Polymerase chain reaction (PCR), a central technology for molecular diagnostics, is highly sensitive but susceptible to the risk of false positives caused by aerosol contamination, especially when an end‐point detection mode is applied. Here, we proposed a solution by designing a clustered regularly interspaced short palindromic repeat (CRISPR)/Cas9 eraser strategy for eliminating potential contamination amplification. The CRISPR/Cas9 engineered eraser is firstly adopted into artpcr reverse‐transcription PCR (RT‐PCR) system to achieve contamination‐free RNA detection. Subsequently, we extended this CRISPR/Cas9 eraser to the PCR system. We engineered conventional PCR primers to enable the amplified products to contain an implanted NGG (protospacer adjacent motif, PAM) site, which is used as a code for specific CRISPR/Cas9 recognition. Pre‐incubation of Cas9/sgRNA with PCR mix leads to a selective cleavage of contamination amplicons, thus only the template DNA is amplified. The developed CRISPR/Cas9 eraser, adopted by both RT‐PCR and PCR systems, showed high‐fidelity detection of SARS‐CoV‐2 and African swine fever virus with a convenient strip test.

Development of a multiplex PCR system to discriminate the alleles of the brown planthopper resistance locus BPH1 in rice (Oryza sativa L.)

The brown planthopper, Nilaparvata lugens Stal (Hemiptera: Delphacidae), is a serious insect pest of rice (Oryza sativa L.). It is known that several wild rice and some Indica Group rice cultivars carry brown planthopper resistance genes. The brown planthopper resistance locus BPH1 has been used for the development of brown planthopper resistance rice in Southeast Asia. Bph1 and Bph2 are considered to be different resistance alleles in the same BPH1 locus, and each resistance allele has a different specificity against different brown planthopper biotypes. The first and second intronic DNA sequences in the BPH1 locus, which are derived from the Indica Group rice cultivar ADR52, wild rice Oryza officinalis and the Japonica Group rice cultivar Nipponbare, were analyzed to find insertion and deletion (InDel) polymorphisms. Based on this InDel polymorphisms information, we developed a multiplex polymerase chain reaction (PCR) method that enables the simultaneous identification of three alleles from the BPH1 locus: Bph1, Bph2 and a Japonica-type allele. Our method will be useful for future breeding research because it facilitates the classification of allele types in the BPH1 locus.

Validation of a SARS-CoV-2 RNA RT-PCR assay for high-throughput testing in blood of COVID-19 convalescent plasma donors and patients.

The frequency of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNAemia in blood donors is uncertain. Thus, assays for SARS-CoV-2 RNA detection in blood, validated on commercially available polymerase chain reaction (PCR) systems, are required to allow a good comparability of data. The cobas SARS-CoV-2 dual-target reverse transcriptase PCR (RT-PCR) assay, licensed for respiratory swab SARS-CoV-2 RNA testing, was validated for detection of viral RNA in blood. For the validation panel, SARS-CoV-2-positive plasma samples were prepared by spiking SARS-CoV-2-positive respiratory specimens in negative human plasma. The 95% limit of detection (LOD95) was determined by probit analysis. For clinical validation, coronavirus disease 2019 (COVID-19) convalescent plasma (CCP) donors and patients with COVID-19 with a severe disease course treated in an intensive care unit (ICU) were included. The validation of the SARS-CoV-2 RT-PCR assay for blood demonstrated high sensitivity and specificity and intra- and inter-assay precision and efficiency. The LOD95 for SARS-CoV-2 RNA was 5.0 genome copies/mL (95% confidence interval [CI], 3.3-12 copies/mL) for target 1 and 4.3 genome copies/mL (95% CI, 2.9-10 copies/mL) for target 2. In a cohort of 39 CCP donors with 66 CCP donations no SARS-CoV-2 RNA in plasma was detected. Screening of 25 blood samples of 19 ICU patients with COVID-19 showed six positive results for SARS-CoV-2 RNA in at least one target of the assay. The SARS-CoV-2 RNA assay, only licensed for respiratory swabs, performed on a PCR system for high-throughput testing, showed a good assay performance for blood testing.