Formation Of Polymers Research Articles

Increasing Dimensionality in Self-Assembly: Toward Two-Dimensional Supramolecular Polymers.

Different approaches to achieve 2D supramolecular polymers, as an alternative to the covalent bottom-up approaches reported for the preparation of 2D materials, are reviewed. The significance of the operation of weak non-covalent forces to induce a lateral growth of a number of self-assembling units is collected. The examples of both thermodynamically and kinetically controlled formation of 2D supramolecular polymers showed in this review demonstrate the utility of this strategy to achieve new 2D materials with biased morphologies (nanosheets, scrolls, porous surfaces) and showing elegant applications like chiral recognition, enantioselective uptake or asymmetric organic transformations. Furthermore, elaborated techniques like seeded or living supramolecular polymerizations have been demonstrated to give rise to complex 2D nanostructures.

Mechanism of microplastics effects on the purification of heavy metals in piggery effluents by microalgae

Microalgae is an effective bioremediation technique employed for treating piggery effluent. However, there is insufficient study on how the presence of microplastics (MPs) in wastewater affects the ability of microalgae to remove heavy metals from piggery effluent. This study aims to investigate the influence of two prevalent heavy metals found in piggery wastewater, Cu2+ (2 mg/L) and Zn2+ (2 mg/L), on their removal by microalgae (Desmodesmus sp. CHX1) in the presence of four types of MPs: polyethylene (PE), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene terephthalate (PET). The results revealed that smaller particle size MPs promoted chlorophyll accumulation, while larger particles inhibits it. Additionally, higher concentrations of MPs promoted chlorophyll accumulation, while lower concentrations inhibited it. As for heavy metals, the presence of microplastics reduced the removal efficiency of Cu2+ and Zn2+ by Desmodesmus sp. CHX1. The highest inhibition of Cu2+ was 30%, 10%, 19%, and 16% of the control (CK), and the inhibition of Zn2+ was 7%, 4%, 4%, and 13%, respectively, under the treatments of PE, PVC, PP and PET MPs. Furthermore, Desmodesmus sp. CHX1 can secrete more extracellular polymeric substances (EPS) and form heterogeneous aggregates with MPs to counteract their pressure. These findings elucidate the impact of MPs on microalgae in bioremediation settings and offer useful insights into the complex relationships between microalgae, MPs, and heavy metals in the environment.

Formation of polymers in the presence of dispersed mineral phase

The adsorption of oligomeric peroxide of sebacic acid on aerosols was studied. The parameters of the adsorption process were found. The effect of aerosil on the polymerization of styrene (ST), methyl acrylate (MA), butyl acrylate (BA), methyl methacrylate (MMA) and butyl methacrylate (BMA) was studied. The initiators used were oligomeric sebacic acid peroxide (OPSA), benzoyl peroxide (BP), lauryl peroxide (PL) and didecanoyl diperoxy adipinate (DP). The mineral filler increases the polymerization rate of MMA, BMA, MA, BA initiated by OPSA. Under the same conditions, the polymerization rate of ST decreases with an increase in the aerosil content in the polymerization system. BP practically does not affect the polymerization rate of vinyl monomers in the presence of aerosil. The reaction of thermal decomposition of OPSA, DP, PL and BP in styrene in the presence of aerosol was studied. An increase in the content of aerosil leads to an increase in the effective decomposition constant of OPSA, DP, PL. in the case of BP, aerosil has practically no effect on the decomposition rate.

Impact of roasted oat flour on the gas cell structure of steamed oat cake and its underlying mechanism

Roasting (or called stir-frying) can modify the properties of oat flour and improve the poor quality of steamed oat cake, especially uneven gas cell and high hardness, but the underlying mechanism remains unclear. The properties of protein-starch network matrix of oat dough (made by roasted oat flours with gelatinization degrees of 30%, 50% 70% and 90%) before and after steaming were investigated, as well as the air/water interfacial characteristics of oat dough liquor. Results revealed that adding roasted oat flour with moderate gelatinization degree to the raw oat flour (ROF) could significantly improve the quality of steamed oat cakes, and their average pore size and specific volume reached the corresponded maximum values when roasted oat flour with gelatinization degree of 50% (G50) was added, which were 1.97 mm and 2.56 mL/g, respectively. Roasted oat flour with moderately gelatinization could not only facilitate the formation of protein polymers by promoting disulfide cross-linking of larger monomer proteins in both raw and steamed oat dough, but also induce the conversion of random coil to α-helix and β-sheets structure, resulting in an ordered protein secondary structure. Meanwhile, the improvement of short-range molecular order structure of starch in oat dough was observed for ROF/G50（w/w = 1:1）sample (RG50). Additionally, compared to ROF, RG50 sample possessed the strongest foaming stability, which increased from 32.70% to 61.43%. In conclusion, the quality enhancement of steamed oat cake can be attributed to the combined effects of changes in the protein-starch matrix and the thin liquid film induced by moderately roasted oat flour.

Proton-triggered topological transformation in superbase-mediated selective polymerization enables access to ultrahigh-molar-mass cyclic polymers.

The selective synthesis of ultrahigh-molar-mass (UHMM, >2 million Da) cyclic polymers is challenging as an exceptional degree of spatiotemporal control is required to overcome the possible undesired reactions that can compete with the desired intramolecular cyclization. Here we present a counterintuitive synthetic methodology for cyclic polymers, represented here by polythioesters, which proceeds via superbase-mediated ring-opening polymerization of gem-dimethylated thiopropiolactone, followed by macromolecular cyclization triggered by protic quenching. This proton-triggered linear-to-cyclic topological transformation enables selective, linear polymer-like access to desired cyclic polythioesters, including those with UHMM surpassing 2 MDa. In addition, this method eliminates the need for stringent conditions such as high dilution to prevent or suppress linear polymer contaminants and presents the opposite scenario in which protic-free conditions are required to prevent cyclic polymer formation, which is capitalized to produce cyclic polymers on demand. Furthermore, such UHMM cyclic polythioester exhibits not only much enhanced thermostability and mechanical toughness, but it can also be quantitatively recycled back to monomer under mild conditions due to its gem-disubstitution.

Unraveling DEHP influence on hemoglobin S polymerization in sickle cell disease: Ex vivo, in vitro and in silico analysis

Sickle cell disease (SCD) is a hereditary hemoglobinopathy, caused by a mutation at position 6 of the β-globin chain and patients are frequently exposed to several blood transfusions in order to maintain physiological function. Transfusion blood bags are composed of PVC and phthalates (as DEHP) are often introduced to the material in order to confer malleability. In this sense, DEHP can easily elute to the blood and cause harmful effects. This study aimed to unravel DEHP effect on SCD patient's hemoglobin function. We found that HbS polymerization using whole erythrocytes is decreased by DEHP in ex vivo experiments and this effect might be mediated by the DEHP-VAL6 interaction, evaluated in silico. Isolated HbS exhibited less polymerization at low DEHP concentrations and increased polymerization rate at higher concentration. When analyzing the propensity to aggregate, HbS is more inclined to aggregate when compared to HbA due to the residue 6 mutation. Circular dichroism showed characteristic hemoglobin peaks for oxygenated HbS that are lost when oxygen is sequestered, and DEHP at higher concentration mildly recovers a peak close to the second hemoglobin one. Finally, by transmission electron microscopy we demonstrated that high DEHP concentration increased polymer formation with a more organized structure. These findings show for the first-time the beneficial effect of low-dose DEHP on HbS polymerization.

Electrochemical Formation of Ionic Porous Organic Polymers Based on Viologen for Electrochromic Applications.

The systematic study of two ionic porous organic polymers (iPOPs) based on viologens and their first applications in the electrochromic field are reported. The viologen-based iPOPs are synthesized by electrochemical polymerization with cyano groups, providing a simple and controllable method for iPOPs that solves the film preparation problems common to viologens. After the characterization of these iPOPs, a detailed study of their electrochromic properties is conducted. The iPOP films based on viologens structure exhibit excellent electrochromic properties. In addition, the resulting iPOP films show high sensitivity to electrolyte ions of different sizes in the redox process. Electrochemical and electrochromic data of the iPOPs explain this phenomenon in detail. These results demonstrate that iPOPs of this type are ideal candidates as electrochromic materials due to their inherent porous structures and ion-rich properties.

A-type proanthocyanidins: Sources, structure, bioactivity, processing, nutrition, and potential applications.

A-type proanthocyanidins (PAs) are a subgroup of PAs that differ from B-type PAs by the presence of an ether bond between two consecutive constitutive units. This additional C-O-C bond gives them a more stable and hydrophobic character. They are of increasing interest due to their potential multiple nutritional effects with low toxicity in food processing and supplement development. They have been identified in several plants. However, the role of A-type PAs, especially their complex polymeric form (degree of polymerization and linkage), has not been specifically discussed and explored. Therefore, recent advances in the physicochemical and structural changes of A-type PAs and their functional properties during extraction, processing, and storing are evaluated. In addition, discussions on the sources, structures, bioactivities, potential applications in the food industry, and future research trends of their derivatives are highlighted. Litchis, cranberries, avocados, and persimmons are all favorable plant sources. Α-type PAs contribute directly or indirectly to human nutrition via the regulation of different degrees of polymerization and bonding types. Thermal processing could have a negative impact on the amount and structure of A-type PAs in the food matrix. More attention should be focused on nonthermal technologies that could better preserve their architecture and structure. The diversity and complexity of these compounds, as well as the difficulty in isolating and purifying natural A-type PAs, remain obstacles to their further applications. A-type PAs have received widespread acceptance and attention in the food industry but have not yet achieved their maximum potential for the future of food. Further research and development are therefore needed.

Adsorption of Polylactic-co-Glycolic Acid on Zinc Oxide Systems: A Computational Approach to Describe Surface Phenomena.

Zinc oxide and polylactic-co-glycolic acid (ZnO-PLGA) nanocomposites are known to exhibit different biomedical applications and antibacterial activity, which could be beneficial for adding to wound dressings after different surgeries. However, possible cytotoxic effects along with various unexpected activities could reduce the use of these prominent systems. This is correlated to the property of ZnO, which exhibits different polymeric forms, in particular, wurtzite, zinc-blende, and rocksalt. In this study, we propose a computational approach based on the density functional theory to investigate the properties of ZnO-PLGA systems in detail. First, three different stable polymorphs of ZnO were considered. Subsequently, the abilities of each system to absorb the PLGA copolymer were thoroughly investigated, taking into account the modulation of electrical, optical, and mechanical properties. Significant differences between ZnO and PLGA systems have been found; in this study, we remark on the potential use of these models and the necessity to describe crucial surface aspects that might be challenging to observe with experimental approaches but which can modulate the performance of nanocomposites.

Competition in formation of stimuli-responsive metallogel and coordination polymers from a single precursor: synthesis, characterization and catalytic application

The synthesis, structure, and catalytic properties of a new 2D crystalline coordination polymer (Zn-CP1) as well as a stable new low molecular weight metallogel (Zn-G1) are reported. Interestingly, both types of materials can be synthesized using the same amino acid based chiral ligand (PV) and Zn2+ ion. Precisely, pure organic solvent (MeOH) prompts gelation while DMF-water medium favours the formation of coordination polymer (CP). Hence, the nature of the solvents and metal counter anion used, play a crucial role in gel formation. Both the CP and gel were characterized by various spectroscopic and analytical techniques such as PXRD, FT-IR, TGA, SEM, and dynamic rheology. Structural analysis of Zn-G1 reveals an entangled spongy-like fibrous network in which spongy patches consist of micro fibres within the matrix of the supramolecular metallogel, while the structural analysis of Zn-CP1 revealed the formation of a 2D sheet-like structure. The Zn-G1 exhibits remarkable stimuli-responsive behaviour towards temperature, mechanical force, and chemicals; however, the Zn-CP1 was found to exhibit promising catalytic activity over Zn-G1 for the conversion of CO2 to cyclic carbonate from various epoxides.

Noninvasive Analysis of Peptidoglycan from Living Animals.

The role of the intestinal microbiota in host health is increasingly revealed in its contributions to disease states. The host-microbiome interaction is multifactorial and dynamic. One of the factors that has recently been strongly associated with host physiological responses is peptidoglycan from bacterial cell walls. Peptidoglycan from gut commensal bacteria activates peptidoglycan sensors in human cells, including the nucleotide-binding oligomerization domain-containing protein 2. When present in the gastrointestinal tract, both the polymeric form (sacculi) and depolymerized fragments can modulate host physiology, including checkpoint anticancer therapy efficacy, body temperature and appetite, and postnatal growth. To utilize this growing area of biology toward therapeutic prescriptions, it will be critical to directly analyze a key feature of the host-microbiome interaction from living hosts in a reproducible and noninvasive way. Here we show that metabolically labeled peptidoglycan/sacculi can be readily isolated from fecal samples collected from both mice and humans. Analysis of fecal samples provided a noninvasive route to probe the gut commensal community including the metabolic synchronicity with the host circadian clock. Together, these results pave the way for noninvasive diagnostic tools to interrogate the causal nature of peptidoglycan in host health and disease.

Enhancing Disease Diagnosis: Statistical Analysis of Haematological Parameters in Sickle Cell Patients, Integrating Predictive Analytics

Sickle cell disease (SCD) affects 30 million people worldwide, causing a range of symptoms from mild to severe, including Vaso occlusive crises (VOC). SCD leads to damaging cycles of sickling and desickling of red blood cells due to HbS polymer formation, resulting in chronic haemolytic anaemia and tissue hypoxia. We propose using machine learning to categorize SCD patients based on haemoglobin, reticulocyte count, and LDH levels, crucial markers of hemolysis. Statistical analysis, particularly Linear Regression, demonstrates how haemoglobin depletion occurs using LDH and reticulocyte parameters.
 Bilirubin and haemoglobin, two integral biomarkers in clinical biochemistry and haematology, serve distinct yet interconnected roles in human physiology. Bilirubin, a product of heme degradation, is a critical indicator of liver function and various hepatic disorders, while haemoglobin, found in red blood cells, is responsible for oxygen transport throughout the body. Understanding the statistical relationship between these biomarkers has far-reaching clinical implications, enabling improved diagnosis, prognosis, and patient care. This research paper conducts a comprehensive statistical analysis of bilirubin and haemoglobin using various regression techniques to elucidate their intricate association. The primary objective of this study is to characterize the relationship between bilirubin and haemoglobin. Through meticulous data analysis, we explore whether these biomarkers exhibit positive, negative, or no correlation. Additionally, this research develops predictive models for estimating haemoglobin levels based on bilirubin data, offering valuable tools for healthcare professionals in clinical practice.

Mechanochemical Synthesis and Three-Dimensional Electron Diffraction Structure Solution of a Novel Cu-Based Protocatechuate Metal-Organic Framework.

Mechanochemical synthesis is a powerful approach to obtain new materials, limiting costs, and times. However, defected and submicrometrical-sized crystal products make critical their characterization through classical single-crystal X-ray diffraction. A valid alternative is represented by three-dimensional (3D) electron diffraction, in which a transmission electron microscope is used, like a diffractometer. This work matches a green water-based mechanochemical synthesis and 3D electron diffraction to obtain and characterize a Cu-based protocatechuate metal-organic framework (PC-MOF). Its structure has been fully refined through dynamical diffraction theory, and free water molecules could be detected in the channels of the framework. Thermal characterization, focused on the dehydration profile determination, leads to the formation of a novel high-temperature 2D coordination polymer, fully solved with 3D electron diffraction data. At last, the strong activity of the PC-MOF against cationic dyes like methylene blue has been reported.

In vitro antifungal activity, cytotoxicity and binding analysis of imidazolium based ionic liquids with fluconazole: DFT and spectroscopic study

Fungal infections represent a significant challenge in various living organisms, including humans, animals, and plants. Fungi are versatile organisms capable of thriving in diverse environments, which contributes to their widespread presence and potential to cause infections. Recently, imidazolium-based ionic liquids emerged as good antimicrobial agent in either monomeric or polymeric form. Therefore, herein, we have reporting the in-vitro antifungal activity, cytotoxicity, and binding analysis of 1-decyl-3-methylimidazolium chloride, [C10Mim][Cl] and 1-hexyl-3-methylimidazolium chloride, [C6Mim][Cl] ionic liquids with fluconazole (Flz). The antifungal activity of ILs and ILs with Flz against candidiasis species (C. albicans) in terms of minimum inhibitory concentration (MIC) was assessed. The antifungal activity results showed that [C10Mim][Cl]-Flz exhibit good antifungal activity then [C10Mim][Cl] and Flz alone. The cytotoxicity of ILs with Flz was checked against human embryonic kidney (HEK293) cell line regarding cell viability and result showed minute cytotoxicity of the combinations at higher concentrations. Further, the binding of ILs with Flz was also studied using various techniques such as UV–visible, fluorescence, Fourier-transform infrared (FTIR) spectroscopy, isothermal titration calorimetry (ITC), and conductivity method. It was found that [C10Mim][Cl] shows more binding affinity then [C6Mim][Cl] with Flz. In-silico molecular docking analysis of Flz-[C10Mim][Cl] complex show a higher binding affinity with CYP51 which in turn enhanced its ability to inhibit the ergosterol biosynthesis as compared to alone [C10Mim][Cl] and Flz. The classical density functional theory (DFT) model was also utilized which further supports the spectroscopic results.

Experimental investigations of diacetylene ice photochemistry in Titan’s atmospheric conditions

Context. A large fraction of the organic species produced photochemically in the atmosphere of Titan can condense to form ice particles in the stratosphere and in the troposphere. According to various studies, diacetylene (C4H2) condenses below 100 km where it can be exposed to ultraviolet radiation. Aims. We studied experimentally the photochemistry of diacetylene ice (C4H2) to evaluate its potential role in the lower altitude photochemistry of Titan’s atmospheric ices. Methods. C4H2 ice films were irradiated with near-ultraviolet (near-UV) photons (λ > 300 nm) with different UV sources to assess the impact of the wavelengths of photons on the photochemistry of C4H2. The evolution of the ice’s composition was monitored using spectroscopic techniques. Results. Our results reveal that diacetylene ice is reactive through singlet-triplet absorption, similar to the photochemistry of other organic ices of Titan (such as dicyanoacetylene C4N2 ice) that we investigated previously. Several chemical processes occurred during the photolysis: the hydrogenation of C4H2 to form other C4 hydrocarbons (vinylacetylene C4H4 to butane C4H10); the formation of larger and highly polymerizable hydrocarbons, such as triacetylene (C6H2); and the formation of an organic polymer that is stable at room temperature. Conclusions. The nondetection of diacetylene ice in Titan’s atmosphere or surface could be rationalized based on our experimental results that C4H2 is photochemically highly reactive in the solid phase when exposed to near-UV radiation that reaches Titan’s lower altitudes and surface. C4H2 may be one of the key molecules promoting the chemistry in the ices and aerosols of Titan’s haze layers, especially in the case of co-condensation with other organic volatiles, with which it could initiate more complex solid-phase chemistry.

Laccase‐mediated polymerization of tannins from a pine bark extract: Toward an eco‐friendly valorization of forest wastes

AbstractThe valorization of tannins from forest by‐products is a major opportunity for the sustainable development of the forestry industry. Herein we report the laccase‐mediated polymerization of tannins obtained from an aqueous pine bark extract. The reaction was conducted under an oxygen atmosphere at 50°C for 60 min and followed by UV–Vis, fluorescence intensity, phenol content, and viscosity measurements. An insoluble polymer was obtained after 45 min, which was attributed to coupling reactions triggered by phenoxyl radicals within the tannins mixture. The polymer showed a marked increase in thermal stability compared with the precursor pine bark extract, with a total mass loss of less than 12% at temperatures up to 500°C, suggesting potential practical applications in flame retardant materials. Additionally, the polymer showed an 85% DPPH activity and a 60% attenuation of singlet oxygen release upon light irradiation, which supports antioxidant and photoprotective properties for the prepared material. To the best of our knowledge, this is the first report to describe the formation of an insoluble polymer by direct enzymatic reaction of an aqueous tannin extract. In this case, soluble tannins are the sole reactants used to produce a promising versatile material for forest waste valorization.

Bioreducible Amphiphilic Hyperbranched Polymer-Drug Conjugate for Intracellular Drug Delivery.

This paper reports synthesis of a bioreducible hyperbranched (HB) polymer by A2+B3 approach from commercially available dithiothreitol (DTT) (A2) and an easily accessible trifunctional monomer (B3) containing three reactive pyridyl-disulfide groups. Highly efficient thiol-activated disulfide exchange reaction leads to the formation of the HB polymer (Mw = 21000; Đ = 2.3) with bioreducible disulfide linkages in the backbone and two different functional groups, namely, hydroxyl and pyridyl-disulfide in the core and periphery, respectively, of the HB-polymer. Postpolymerization functionalization of the hydroxyl-groups with camptothecin (CPT), a topoisomerase inhibitor and known anticancer drug, followed by replacing the terminal pyridyl-disulfide groups with oligo-oxyethylene-thiol resulted in easy access to an amphiphilic HB polydisulfide-CPT conjugate (P1) with a very high drug loading content of ∼40%. P1 aggregated in water (above ∼10 μg/mL) producing drug-loaded nanoparticles (Dh ∼ 135 nm), which showed highly efficient glutathione (GSH)-triggered release of the active CPT. Mass spectrometry analysis of the GSH-treated P1 showed the presence of the active CPT drug as well as a cyclic monothiocarbonate product, which underpins the cascade-degradation mechanism involving GSH-triggered cleavage of the labile disulfide linkage, followed by intramolecular nucleophilic attack by the in situ generated thiol to the neighboring carbonate linkage, resulting in release of the active CPT drug. The P1 nanoparticle showed excellent cellular uptake as tested by confocal fluorescence microscopy in HeLa cells by predominantly endocytosis mechanism, resulting in highly efficient cell killing (IC50 ∼ 0.6 μg/mL) as evident from the results of the MTT assay, as well as the apoptosis assay. Comparative studies with an analogous linear polymer-CPT conjugate showed much superior intracellular drug delivery potency of the hyperbranched polymer.

Dual One and Two‐Photon Solvent‐Free Hybrid Photoresist for High‐Resolution and Grayscale 3D Microprinting

Additive manufacturing holds a strong promise to revolutionize industry. Fabricating high‐resolution and large objects with specific physical properties remains a critical challenge. In this direction, innovation in both chemical processing and 3D‐printing techniques are needed. Here, a solvent‐free hybrid organic‐inorganic photoresist combining a radical photoinitiator and a photobase generator is photostructured by grayscale lithography and direct laser writing using both one‐ and two‐photon absorption. Infrared spectroscopy suggests that one‐photon absorption activates the photoinitiator and leads to radical polymerization of organic moieties, triggering silanol condensation in a synergetic way. In contrast, upon two‐photon absorption, the driving force of polymer formation is the photobase‐induced silanol condensation. The proposed approach produces both large area and high‐resolution 3D structures upon one‐ and two‐photon absorption induced polymerization, respectively. This new paradigm paves the way toward the efficient fabrication of on‐demand devices for personalized health care, microfluidics, or microoptics.

Benchmarking the Humidity-Dependent Mechanical Response of (Nano)fibrillated Cellulose and Dissolved Polysaccharides as Sustainable Sand Amendments.

Soil quality is one of the main limiting factor in the development of the food sector in arid areas, mainly due to its poor mechanics and lack of water retention. Soil's organic carbon is nearly absent in arid soils, though it is important for water and nutrient transport, to soil mechanics, to prevent erosion, and as a long-term carbon sink. In this study, we evaluate the potential benefits that are brought to inert sand by the incorporation of a range of, mainly, cellulosic networks in their polymeric or structured (fiber) forms, analogously to those found in healthy soils. We explore the impact of a wide range of nonfood polysaccharide-based amendments, including pulp fibers, nanocellulose, cellulose derivatives, and other readily available polysaccharide structures derived from arthropods (chitosan) or fruit peels (pectin) residues. A practical methodology is presented to form sand-polymer composites, which are evaluated for their soil mechanics as a function of humidity and the dynamics of their response to water. The mechanics are correlated to the network of polymers formed within the pores of the sandy soil, as observed by electron microscopy. The response to water is correlated to both the features of the network and the individual polysaccharides' physicochemical features. We expect this work to provide a rapid and reproducible methodology to benchmark sustainable organic amendments for arid soils.

In Vivo Osteogenic and Angiogenic Properties of a 3D-Printed Isosorbide-Based Gyroid Scaffold Manufactured via Digital Light Processing.

Osteogenic and angiogenic properties of synthetic bone grafts play a crucial role in the restoration of bone defects. Angiogenesis is recognised for its support in bone regeneration, particularly in larger defects. The objective of this study is to evaluate the new bone formation and neovascularisation of a 3D-printed isosorbide-based novel CSMA-2 polymer in biomimetic gyroid structures. The gyroid scaffolds were fabricated by 3D printing CSMA-2 polymers with different hydroxyapatite (HA) filler concentrations using the digital light processing (DLP) method. A small animal subcutaneous model and a rat calvaria critical-size defect model were performed to analyse tissue compatibility, angiogenesis, and new bone formation. The in vivo results showed good biocompatibility of the 3D-printed gyroid scaffolds with no visible prolonged inflammatory reaction. Blood vessels were found to infiltrate the pores from day 7 of the implantation. New bone formation was confirmed with positive MT staining and BMP-2 expression, particularly on scaffolds with 10% HA. Bone volume was significantly higher in the CSMA-2 10HA group compared to the sham control group. The results of the subcutaneous model demonstrated a favourable tissue response, including angiogenesis and fibrous tissue, indicative of the early wound healing process. The results from the critical-size defect model showcased new bone formation, as confirmed by micro-CT imaging and immunohistochemistry. The combination of CSMA-2 as the 3D printing material and the gyroid as the 3D structure was found to support essential events in bone healing, specifically angiogenesis and osteogenesis.