Polymer-based Nanocomposites Research Articles

Metal-Polymer Nanocomposites: A Promising Approach to Antibacterial Materials.

There has been a new approach in the development of antibacterials in order to enhance the antibacterial potential. The nanoparticles are tagged on to the surface of other metals or metal oxides and polymers to achieve nanocomposites. These have shown significant antibacterial properties when compared to nanoparticles. In this article we explore the antibacterial potentials of metal-based and metal-polymer-based nanocomposites, various techniques which are involved in the synthesis of the metal-polymer, nanocomposites, mechanisms of action, and their advantages, disadvantages, and applications.

Polymer-based nanocomposites as defence material

Polymer-based nanocomposites as defence material

Layer-Controlled Perovskite 2D Nanosheet Interlayer for the Energy Storage Performance of Nanocomposites.

Polymer-based nanocomposites are desirable materials for next-generation dielectric capacitors. 2D dielectric nanosheets have received significant attention as a filler. However, randomly spreading the 2D filler causes residual stresses and agglomerated defect sites in the polymer matrix, which leads to the growth of an electric tree, resulting in a more premature breakdown than expected. Therefore, realizing a well-aligned 2D nanosheet layer with a small amount is a key challenge; it can inhibit the growth of conduction paths without degrading the performance of the material. Here, an ultrathin Sr1.8 Bi0.2 Nb3 O10 (SBNO) nanosheet filler is added as a layer into poly(vinylidene fluoride) (PVDF) films via the Langmuir-Blodgett method. The structural properties, breakdown strength, and energy storage capacity of a PVDF and multilayer PVDF/SBNO/PVDF composites as a function of the thickness-controlled SBNO layer are examined. The seven-layered (only 14nm) SBNO nanosheets thin film can sufficiently prevent the electrical path in the PVDF/SBNO/PVDF composite and shows a high energy density of 12.8 J cm-3 at 508 MV m-1 , which is significantly higher than that of the bare PVDF film (9.2 J cm-3 at 439 MV m-1 ). At present, this composite has the highest energy density among the polymer-based nanocomposites under the filler of thin thickness.

Carbon nanotube network formation and configuration/morphology on reinforcing and conductive performance of polymer-based nanocomposites

The present research work shows that carbon nanotube network formation and configuration/morphology play significant role in mechanical and conductive performance of polymer-based nanocomposites. Using several experimental techniques and theoretical approaches, the main entities of the established networks with aligned and random morphology were identified, the underlying mechanisms of network formation and the nature of its building blocks were revealed, and the corresponding network effects on the mechanical and electrical performances of such nanocomposites using single-walled carbon nanotubes in low- and high-density polyethylene matrices were thoroughly studied. Results show that the formed network is in majority constructed from nanotube bundles, considered as stiff rod-like Brownian particles, geometrically entangled at the critical volume fraction φcv (geometrical percolation threshold). The geometrical percolation threshold was found to be independent of the network morphology (aligned of injection molded samples and random of compression molded samples). Moreover, the mechanical and rheological properties were found to be independent of the nanocomposite morphology. However, the electrical performance of such materials was surprisingly different, strongly dependent on the morphology (aligned versus random as defined above). The random configuration significantly decreases the transition of the nanocomposites from isolator to conductor. The electrical percolation threshold, φcve, was found to be by one order of magnitude lower than the corresponding geometrical threshold, thus profoundly improving the conductivity of such nanocomposites. This key discovery enables the production of not only highly reinforced and conductive nanocomposites, but also the ones with remarkable conductivity and flexibility with minimal addition carbon nanotubes.

Polymer-Based Conductive Nanocomposites for the Development of Bioanodes Using Membrane-Bound Enzyme Systems of Bacteria Gluconobacter oxydans in Biofuel Cells.

The development of biofuel cells (BFCs) currently has high potential since these devices can be used as alternative energy sources. This work studies promising materials for biomaterial immobilization in bioelectrochemical devices based on a comparative analysis of the energy characteristics (generated potential, internal resistance, power) of biofuel cells. Bioanodes are formed by the immobilization of membrane-bound enzyme systems of Gluconobacter oxydans VKM V-1280 bacteria containing pyrroloquinolinquinone-dependent dehydrogenases into hydrogels of polymer-based composites with carbon nanotubes. Natural and synthetic polymers are used as matrices, and multi-walled carbon nanotubes oxidized in hydrogen peroxide vapor (MWCNTox) are used as fillers. The intensity ratio of two characteristic peaks associated with the presence of atoms C in the sp3 and sp2 hybridization for the pristine and oxidized materials is 0.933 and 0.766, respectively. This proves a reduced degree of MWCNTox defectiveness compared to the pristine nanotubes. MWCNTox in the bioanode composites significantly improve the energy characteristics of the BFCs. Chitosan hydrogel in composition with MWCNTox is the most promising material for biocatalyst immobilization for the development of bioelectrochemical systems. The maximum power density was 1.39 × 10-5 W/mm2, which is 2 times higher than the power of BFCs based on other polymer nanocomposites.

Role of Microstructures in the Dielectric Properties of PVDF-Based Nanocomposites Containing High-Permittivity Fillers for Energy Storage.

Polymer-based nanocomposites containing inorganic ferroelectric inclusions, typically ABO3 perovskites, have emerged as innovative dielectric materials for energy storage and electric insulation, potentially coupling the high breakdown strength (BDS) and easy processing of polymers with the enhancement of dielectric constant provided by the ferroelectric phase. In this paper, experimental data and three-dimensional finite element method (3D FEM) simulations were combined to shed some light on the effect of microstructures on the dielectric properties of poly(vinylidene fluoride) (PVDF)-BaTiO3 composites. The existence of particle aggregates or touching particles has a strong effect on the effective dielectric constant and determines an increase of the local field in the neck region of the ferroelectric phase with a detrimental effect on the BDS. The distribution of the field and the effective permittivity are very sensitive to the specific microstructure considered. The degradation of the BDS can be overcome by coating the ferroelectric particles with a thin shell of an insulating oxide with a low dielectric constant, such as SiO2 (εr = 4). The local field is highly concentrated on the shell, while the field in the ferroelectric phase is reduced almost to zero and that on the matrix is close to the applied one. The electric field in the matrix becomes less homogeneous with increasing the dielectric constant of the shell material, as happens with TiO2 (εr = 30). These results provide a solid background to explain the enhanced dielectric properties and the superior BDS of composites containing core-shell inclusions.

Microwave absorption theory and recent advances in microwave absorbers by polymer-based nanocomposites (carbons, oxides, sulfides, metals, and alloys)

Microwave absorption theory and recent advances in microwave absorbers by polymer-based nanocomposites (carbons, oxides, sulfides, metals, and alloys)

A particle‐continuum coupling method for amorphous polymers with multiple particle‐based domains

AbstractThis contribution presents a partitioned‐domain particle‐continuum coupling method for amorphous polymers with multiple particle‐based domains. The coupling method treats the particle‐based domains with molecular dynamics (MD) simulations and the continuum domain discretized by the Finite Element (FE) method. In the continuum domain, a viscoelastic‐viscoplastic (VE‐VP) constitutive model derived from MD simulation results of the polymer at molecular resolution is employed. The effects of the minimum distances between the domains, the distribution and the number of the MD domains as well as the strain rates are studied under uniaxial tension. This method is a precursor for multiscale simulations of polymer‐based nanocomposites (PNC).

Developing a high-efficiency predictive model for self-temperature-compensated piezoresistive properties of carbon nanotube/graphene nanoplatelet polymer-based nanocomposites

Developing a high-efficiency predictive model for self-temperature-compensated piezoresistive properties of carbon nanotube/graphene nanoplatelet polymer-based nanocomposites

Tribology of polymer-based nanocomposites reinforced with 2D materials

Tribology of polymer-based nanocomposites reinforced with 2D materials

Enhanced Energy Storage Performance Achieved in Multilayered PVDF–PMMA Nanocomposites Incorporated with High-Entropy Oxide Nanofibers

Large depletion of fossil fuels promotes the sustainable development of renewable energy. Polymer-based dielectric nanocomposites are widely utilized owing to their ultrafast charging–discharging rate and high power density in pulse power systems, smart grids, and other electrical devices. In this paper, completely new high-entropy oxide (Eu0.2Bi0.2Y0.2La0.2Cr0.2)2O3 (in short, E) nanofibers are fabricated, and the multilayered nanocomposites are prepared with electrospinning and layer-by-layer hot-pressing processes. A high energy density of 20.11 J cm–3 and an efficiency of 64% are achieved at 598.9 kV mm–1 in the trilayered nanocomposites. First, the enhanced entropy of the lattices leads to local polymorphic distortion, which, to a certain extent, limits the movements of long polymer chains, reduces the dielectric loss, and improves the breakdown strength of the nanocomposites. Moreover, for multilayered nanocomposites, the Schottky barrier forms with the direct contact between the electrodes and ferroelectric polymer. The difference in permittivity of the materials in contact with the electrodes leads to the difference in the barrier height around the interfaces, which results in a larger local electric field and a higher breakdown strength. Besides, the multilayered nanocomposites improve the rough interfaces between inorganics and organics and reduce the probability of dielectric breakdown. This work provides a new filling strategy and structural-layer design for the application of flexible dielectric materials.

Applications of Polyaniline-Based Molybdenum Disulfide Nanoparticles against Brain-Eating Amoebae.

Primary amoebic meningoencephalitis and granulomatous amoebic encephalitis are distressing infections of the central nervous system caused by brain-eating amoebae, namely, Naegleria fowleri and Acanthamoeba spp., respectively, and present mortality rates of over 90%. No single drug has been approved for use against these infections, and current therapy is met with an array of obstacles including high toxicity and limited specificity. Thus, the development of alternative effective chemotherapeutic agents for the management of infections due to brain-eating amoebae is a crucial requirement to avert future mortalities. In this paper, we synthesized a conducting polymer-based nanocomposite entailing polyaniline (PANI) and molybdenum disulfide (MoS2) and explored its anti-trophozoite and anti-cyst potentials against Acanthamoeba castellanii and Naegleria fowleri. The intracellular generation of reactive oxygen species (ROS) and ultrastructural appearances of amoeba were also evaluated with treatment. Throughout, treatment with the 1:2 and 1:5 ratios of PANI/MoS2 at 100 μg/mL demonstrated significant anti-amoebic effects toward A. castellanii as well as N. fowleri, appraised to be ROS mediated and effectuate physical alterations to amoeba morphology. Further, cytocompatibility toward human keratinocyte skin cells (HaCaT) and primary human corneal epithelial cells (pHCEC) was noted. For the first time, polymer-based nanocomposites such as PANI/MoS2 are reported in this study as appealing options in the drug discovery for brain-eating amoebae infections.

Conjugated Polymer-Based Nanocomposites for Pressure Sensors.

Flexible sensors are the essential foundations of pressure sensing, microcomputer sensing systems, and wearable devices. The flexible tactile sensor can sense stimuli by converting external forces into electrical signals. The electrical signals are transmitted to a computer processing system for analysis, realizing real-time health monitoring and human motion detection. According to the working mechanism, tactile sensors are mainly divided into four types-piezoresistive, capacitive, piezoelectric, and triboelectric tactile sensors. Conventional silicon-based tactile sensors are often inadequate for flexible electronics due to their limited mechanical flexibility. In comparison, polymeric nanocomposites are flexible and stretchable, which makes them excellent candidates for flexible and wearable tactile sensors. Among the promising polymers, conjugated polymers (CPs), due to their unique chemical structures and electronic properties that contribute to their high electrical and mechanical conductivity, show great potential for flexible sensors and wearable devices. In this paper, we first introduce the parameters of pressure sensors. Then, we describe the operating principles of resistive, capacitive, piezoelectric, and triboelectric sensors, and review the pressure sensors based on conjugated polymer nanocomposites that were reported in recent years. After that, we introduce the performance characteristics of flexible sensors, regarding their applications in healthcare, human motion monitoring, electronic skin, wearable devices, and artificial intelligence. In addition, we summarize and compare the performances of conjugated polymer nanocomposite-based pressure sensors that were reported in recent years. Finally, we summarize the challenges and future directions of conjugated polymer nanocomposite-based sensors.

Biocompatible Silica-Polyethylene Glycol-Based Composites for Immobilization of Microbial Cells by Sol-Gel Synthesis.

Biocatalysts based on the methylotrophic yeast Ogataea polymorpha VKM Y-2559 immobilized in polymer-based nanocomposites for the treatment of methanol-containing wastewater were developed. The organosilica composites with different matrix-to-filler ratios derived from TEOS/MTES in the presence of PEG (SPEG-composite) and from silicon-polyethylene glycol (STPEG-composite) differ in the structure of the silicate phase and its distribution in the composite matrix. Methods of fluorescent and scanning microscopy first confirmed the formation of an organosilica shell around living yeast cells during sol-gel bio-STPEG-composite synthesis. Biosensors based on the yeast cells immobilized in STPEG- and SPEG-composites are characterized by effective operation: the coefficient of sensitivity is 0.85 ± 0.07 mgO2 × min-1 × mmol-1 and 0.87 ± 0.05 mgO2 × min-1 × mmol-1, and the long-term stability is 10 and 15 days, respectively. The encapsulated microbial cells are protected from UV radiation and the toxic action of heavy metal ions. Biofilters based on the developed biocatalysts are characterized by high effectiveness in the utilization of methanol-rich wastewater-their oxidative power reached 900 gO2/(m3 × cycle), and their purification degree was up to 60%.

Polymer-based nanocomposites: Role of interface for effective microwave absorption

Polymer-based nanocomposites are playing a key role in advancing microwave absorption and electromagnetic interference shielding technology. Polymer nanocomposites with abundant interfaces are injecting new vitality into the advanced absorbers. Adjustable electrical conductivity, controllable complex permittivity, environmental stability, anti-corrosion, lightweight and facile synthesis process are other key advantages of this system. Therefore, identifying suitable materials to combine with polymers through surface engineering and types of interactions among the dissimilar components are of great importance to achieve strong microwave absorption and guide future trends. This mini-review presents the role of homojunction and heterojunction in polymer-based absorbers. It also discusses how complex heterogeneous and homogenous interfaces influence the corresponding microwave absorption. Then, the challenges with polymer-based absorbers which hinder their electromagnetic shielding properties along with the effective solutions to address these issues are highlighted. In the end, the review provides future direction and strategies to design polymer-based nanocomposites to mitigate microwave pollution at a large scale.

The strategic applications of natural polymer nanocomposites in food packaging and agriculture: Chances, challenges, and consumers' perception.

Natural polymer-based nanocomposites have received significant attention in both scientific and industrial research in recent years. They can help to eliminate the consequences of application of petroleum-derived polymeric materials and related environmental concerns. Such nanocomposites consist of natural biopolymers (e.g., chitosan, starch, cellulose, alginate and many more) derived from plants, microbes and animals that are abundantly available in nature, biodegradable and thus eco-friendly, and can be used for developing nanocomposites for agriculture and food industry applications. Biopolymer-based nanocomposites can act as slow-release nanocarriers for delivering agrochemicals (fertilizers/nutrients) or pesticides to crop plants to increase yields. Similarly, biopolymer-based nanofilms or hydrogels may be used as direct product coating to extend product shelf life or improve seed germination or protection from pathogens and pests. Biopolymers have huge potential in food-packaging. However, their packaging properties, such as mechanical strength or gas, water or microbial barriers can be remarkably improved when combined with nanofillers such as nanoparticles. This article provides an overview of the strategic applications of natural polymer nanocomposites in food and agriculture as nanocarriers of active compounds, polymer-based hydrogels, nanocoatings and nanofilms. However, the risk, challenges, chances, and consumers' perceptions of nanotechnology applications in agriculture and food production and packaging have been also discussed.

A review on the effectiveness of nanocomposites for the treatment and recovery of oil spill

The introduction of unintended oil spills into the marine ecosystem has a significant impact on aquatic life and raises important environmental concerns. The present review summarizes the recent studies where nanocomposites are applied to treat oil spills. The review deals with the techniques used to fabricate nanocomposites and identify the characteristics of nanocomposites beneficial for efficient recovery and treatment of oil spills. It classifies the nanocomposites into four categories, namely bio-based materials, polymeric materials, inorganic-inorganic nanocomposites, and carbon-based nanocomposites, and provides an insight into understanding the interactions of these nanocomposites with different types of oils. Among nanocomposites, bio-based nanocomposites are the most cost-effective and environmentally friendly. The grafting or modification of magnetic nanoparticles with polymers or other organic materials is preferred to avoid oxidation in wet conditions. The method of synthesizing magnetic nanocomposites and functionalization polymer is essential as it influences saturation magnetization. Notably, the inorganic polymer-based nanocomposite is very less developed and studied for oil spill treatment. Also, the review covers some practical considerations for treating oil spills with nanocomposites. Finally, some aspects of future developments are discussed. The terms "Environmentally friendly," "cost-effective," and "low cost" are often used, but most of the studies lack a critical analysis of the cost and environmental damage caused by chemical alteration techniques. However, the oil and gas industry will considerably benefit from the stimulation of ideas and scientific discoveries in this field.

Thermal and Dielectric Behaviour of Polymer-Based Nanocomposites Flexible Sheets as Highly Stable Dielectric Materials

The silica zinc oxide nanoparticles filled poly-vinylidene-fluoride (PVDF)-based nanocomposite flexible sheets (NC FSs) are synthesized by co-precipitation method. The X-ray diffraction patterns reveal the development of various diffraction planes related to zinc oxide (ZnO) and SiO2 phases. The crystallinity of ZnO phase is decreased with increasing weight percent (wt.%) of silica nanofillers (NFs). The scanning electron microscope microstructure of synthesized PVDF-based NCs FSs is changed with increasing wt.% of silica NFs. The energy-dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy analyses confirm the presence of different elements and the formation of chemical bonding between them. In high temperature region, the weight-loss of synthesized PVDF-based NCs FSs is decreased from 89.90% to 49.26% with increasing wt.% of silica NFs. The values of dielectric permittivity, loss-factor, impedance, and AC-conductivity of PVDF-based NC FSs synthesized for maximum amount of silica NFs are found to be 13.7, 0.03, 0.16 MΩ, and 19.9 × 10 − 6 S/m, respectively. Results show that the synthesized PVDF-based NC FSs are the potential candidates of light emitting diodes and energy storage devices.

Anatase TiO2-x and zwitterionic porphyrin polymer-based nanocomposite for enhanced cancer photodynamic therapy.

Photodynamic therapy has been used as a treatment option for cancer; however, the existing TiO2 photosensitizer does not have the ability to specifically target cancer cells. This lack of selectivity reduces its effectiveness in overcoming cancer resistance. To improve photodynamic therapy outcomes, an innovative solution is proposed. In this study, we report on the compounding of a zwitterionic covalent organic polymer (COP) with a TiO2 photosensitizer for the first time. The aim is to overcome cancer cellular resistance. A one-pot synthetic strategy, which includes the construction of a porphyrin-based COP has been employed. This strategy has also been applied to the rapid preparation of anatase defective TiO2 (TiO2-x). To improve the hydrophilic and antifouling properties of the polymer, zwitterion L-cysteine has been conjugated with a porphyrin-based COP using a thiol-ene "click chemistry" reaction. The novel zwitterionic porphyrin-based COP has the ability to trigger biodegradation under the acid microenvironment due to the presence of acid-sensitive β-thioether esters. When combined with TiO2-x, the resultant nanocomposite produces an enhanced photodynamic therapy effect for drug-resistant cancer cells under NIR laser irradiation. This is due to the strong mutual sensitization of zwitterionic porphyrin-based COP and TiO2-x. Importantly, the nanocomposite delivery system exhibits excellent cytocompatibility in the dark and has the potential to improve the accuracy of cancer diagnosis through fluorescence imaging. The results of this study demonstrate the potential application of this alternative nanocomposite delivery system for remote-controllable photodynamic therapy of tumors.

Nanomaterial Constructs for Catalytic Applications in Biomedicine: Nanobiocatalysts and Nanozymes.

Nanomaterials possess superior advantages due to their special geometries, higher surface area, and unique mechanical, optical, and physicochemical properties. Their characteristics make them great contributors to the development of many technological and industrial sectors. Therefore, novel nanomaterials have an increasing interest in many research areas including biomedicine such as chronic inflammations, disease detection, drug delivery, and infections treatment. Their relevant role is, in many cases, associated with an effective catalytic application, either as a pure catalyst (acting as a nanozyme) or as a support for catalytically active materials (forming nanobiocatalysts). In this review, we analyze the construction of nanozymes and nanobiocatalyst by different existing forms of nanomaterials including carbon-based nanomaterials, metal-based nanomaterials, and polymer-based nanocomposites. Then, we examine successful examples of such nanomaterials employed in biomedical research. The role played by nanomaterials in catalytic applications is analyzed to identify possible research directions toward the development of the field and the achievement of real practicability.Graphical Abstract