Polyfluoroalkyl Substances Contamination Research Articles

Drinking water quality impacts oocyte viability and embryo development

Normal reproductive function and fertility is considered a “sixth vital sign” because disruptions to this sensitive physiological system can forewarn other health issues, including exposure to environmental toxicants. We found that female mice exhibited profound loss of embryos during pre-implantation and fetal development coincident with a change to the source of their drinking water. When female mice were provided with tap water from the building in which they were housed (Water 2), instead of tap water from a neighboring building which was their previous supply (Water 1), ovulated oocytes were degenerated or had impaired meiotic maturation, and failed to form embryos. The harmful effects of Water 2 exposure were not reversible even following a recovery period; however, carbon-filtration of Water 2 removed the toxic contaminant. Water composition analysis to identify the responsible toxicant(s) found that trace elements were present at expected levels and phthalates were undetectable. Per- and Poly-fluoroalkyl Substances (PFAS), a family of persistent organic pollutants were detected at ∼4 ng/L. To investigate further, female mice were given drinking water categorized by level of PFAS contamination (0.6 ng/L, 2.8 ng/L, or 4.4 ng/L) for 9 weeks. Compared to mice consuming purified MilliQ water, mice consuming PFAS-contaminated water had decreased oocyte quality, impaired embryogenesis and reduced cell numbers in blastocysts. PFAS concentration in the drinking water was negatively correlated with oocyte viability. Importantly, the levels of PFAS detected in the tap water are within current “safe level” guidelines, and further research is needed to determine whether PFAS are responsible for the observed reproductive toxicity. However, this research demonstrating that water deemed suitable for human consumption has detrimental effects on mammalian embryo development has important implications for public health and water quality policies.

Adapting to PFAS contamination of private drinking water wells near a PFAS production facility in the US Atlantic Coastal Plain of North Carolina.

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are widespread groundwater contaminants and are present in over 7000 drinking water wells near a North Carolina (NC) PFAS plant (Chemours). To understand options available to affected residents, we used new and previously existing water quality data to investigate deeper aquifers as alternate drinking water supplies and compared the regulatory responses near Chemours and three other PFAS production facilities with nearby contaminated wells. Data from >100 wells show that GenX concentrations decrease with increasing depth through the four aquifers in the study area: surficial, Black Creek, Upper Cape Fear, and bedrock. This illustrates the extent of vertical PFAS penetration through the aquifer sequence following roughly 40 years of atmospheric emissions. Detailed data on 143 water quality parameters in nine deep wells (two Upper Cape Fear, seven bedrock) revealed only eight exceedances of drinking water standards (one each for arsenic, perfluorooctanoic acid [PFOA], iron, chloride, and gross alpha, and three for manganese) and nine exceedances of health advisories (all for sodium). Regulatory responses to PFAS contamination of wells in four states included mention of deeper wells as an alternate water source only for nonresidential users in NC and residential users in Vermont. The bedrock aquifer is currently used by some residents and may be a viable alternative to shallower groundwater, though arsenic treatment may be beneficial at some deep wells and long-term sustainability of the aquifer should be evaluated. PRACTITIONER POINTS: GenX concentrations decreased with increasing depth in four aquifers near a PFAS plant. A few exceedances of drinking water standards and health advisories were found in deep bedrock wells. New bedrock wells could be part of the response to PFAS issues in shallower wells. In the long term, deep bedrock wells might be a less expensive option for some residents.

Opportunity and Challenge of Advanced Porous Sorbents for PFAS Removal.

Per- and polyfluoroalkyl substances (PFASs), comprising over 9,000 persistent synthetic organic contaminants, are extensively found in the environment and pose significant risks to both human and ecological health. Among the strategies for addressing PFAS contamination, adsorption processes have proven to be cost-effective. Traditional sorbents such as ion-exchange resins and activated carbon have been found to exhibit low adsorption capacities and slow equilibration times. Recent innovations in porous materials, including metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs), however, offer significant improvements in the efficiency of PFAS adsorption. This review thoroughly examines the latest advancements in these materials, analyzing their mechanisms of adsorption, and concludes by suggesting directions for future research that could further enhance their effectiveness in PFAS management.

Forever Pesticides: A Growing Source of PFAS Contamination in the Environment.

Environmental contamination by fluorinated chemicals, in particular chemicals from the per- and polyfluoroalkyl substances (PFAS) class, has raised concerns around the globe because of documented adverse impacts on human health, wildlife, and ecosystem quality. Recent studies have indicated that pesticide products may contain a variety of chemicals that meet the PFAS definition, including the active pesticide ingredients themselves. Given that pesticides are some of the most widely distributed pollutants across the world, the legacy impacts of PFAS addition into pesticide products could be widespread and have wide-ranging implications on agriculture and food and water contamination, as well as the presence of PFAS in rural environments. The purpose of this commentary is to explore different ways that PFAS can be introduced into pesticide products, the extent of PFAS contamination of pesticide products, and the implications this could have for human and environmental health. We submitted multiple public records requests to state and federal agencies in the United States and Canada and extracted relevant data from those records. We also compiled data from publicly accessible databases for our analyses. We found that the biggest contributor to PFAS in pesticide products was active ingredients and their degradates. Nearly a quarter of all US conventional pesticide active ingredients were organofluorines and 14% were PFAS, and for active ingredients approved in the last 10 y, this had increased to 61% organofluorines and 30% PFAS. Another major contributing source was through PFAS leaching from fluorinated containers into pesticide products. Fluorination of adjuvant products and "inert" ingredients appeared to be limited, although this represents a major knowledge gap. We explored aspects of immunotoxicity, persistence, water contamination, and total fluorine load in the environment and conclude that the recent trend of using fluorinated active ingredients in pesticides may be having effects on chemical toxicity and persistence that are not given adequate oversight in the United States. We recommend a more stringent risk assessment approach for fluorinated pesticides, transparent disclosure of "inert" ingredients on pesticide labels, a complete phase-out of post-mold fluorination of plastic containers, and greater monitoring in the United States. https://doi.org/10.1289/EHP13954.

Per- and polyfluoroalkyl substances (PFAS) in paired tap water and house dust from United States homes

Most people in the United States have been exposed to per- and polyfluoroalkyl substances (PFAS) which have been linked to a wide array of adverse health conditions in adults and children. The consumption of contaminated drinking water is an important human exposure pathway to PFAS. Residential sources also contribute to PFAS exposure through dermal contact and ingestion of house dust, which acts as an aggregate of chemicals from sources like furnishing materials and consumer products. The U.S. Department of Housing and Urban Development (HUD) conducted the first nationwide survey of residential hazards called the American Healthy Homes Survey (AHHS) in 2005, followed by a second survey (AHHS II) in 2017. The U.S. Environmental Protection Agency (EPA) collaborated with HUD on both efforts and subsequently analyzed PFAS in household tap water and house dust collected from the same homes during the AHHS II study. This study leverages these paired samples to investigate potentially important exposure sources and pathways in the residential environment. Here we report results for paired household tap water and house dust samples from 241 homes for 13 and 16 PFAS chemicals, respectively. All 13 targeted chemicals were detected in the household tap water samples with detections ranging from 100 % for PFBS to 1 % for PFNS, and all 16 targeted chemicals were detected in the house dust samples with detections ranging from 97 % for PFOA to 9 % for PFNS. Four chemicals (PFOA, PFOS, PFHxS, and PFHpA) were measured above the limit of detection in at least 50 % of the samples in both media. All households had at least one of the targeted PFAS detected in both their tap water and house dust. Results provided evidence that geographical factors, such as proximity to ambient contamination sources, were main drivers of PFAS contamination in tap water, while PFAS contamination in house dust was driven mainly by within-home sources. Exposure estimates calculated from the measured PFAS concentrations highlight the importance of addressing potential sources of exposure to PFAS within homes in addition to ambient sources affecting communities’ drinking water, particularly to reduce children’s exposure to these chemicals.

Impacts of rapidly urbanizing watershed comprehensive management on per- and polyfluoroalkyl substances pollution: Based on PFAS “diversity” assessment

The impact of watershed comprehensive management (WCM) on per- and polyfluoroalkyl substances (PFAS) pollution in rapidly urbanizing areas remains unclear. In a typical rapidly urbanizing watershed of Shenzhen, China, we investigated temporal variations in contamination level, primary source and ecological risk of 50 emerging and legacy PFAS, as well as the replacement trends of emerging PFAS before and after WCM during a six-year sampling campaign. We found that large-scale dredging was a non-negligible factor in abnormally increased PFAS concentrations (6.43 %–456.16 %) during WCM through their release from river sediments. To better characterize the diverse and complex PFAS contamination, a novel pollution assessment method, PFAS “diversity”, was adopted based on a modified Shannon–Weiner diversity index and Pielou evenness index, reflecting numbers of PFAS detected and how evenly each PFAS contributed to the total PFAS concentrations at specific sampling sites. Importantly, we found that the Pielou evenness index can indicate and quantify abnormal pollution sources (especially point sources) along the river. The results revealed that WCM did not effectively reduce total PFAS concentrations and diversity in the rapidly urbanizing watershed but obviously improved point source pollution. Furthermore, 6:2 polyfluorinated phosphate diesters and hexafluoropropylene oxide dimer acid (GenX) that posed high ecological risks emerged and the number of sampling sites with high risk increased from 16 to 20 after WCM. Finally, we summarize several important issues related to PFAS contamination during WCM and propose specific countermeasures, such as adopting environmental dredging and reducing the proportion of ecological water replenished by wastewater treatment plant effluent for better control of PFAS pollution. Our study highlighted the limited effectiveness of WCM in mitigating PFAS pollution and the importance of emerging contaminant regulation in rapidly urbanizing watersheds during WCM.

Bioconcentration of Per- and Polyfluoroalkyl Substances and Precursors in Fathead Minnow Tissues Environmentally Exposed to Aqueous Film-Forming Foam-Contaminated Waters.

Exposure to per- and polyfluoroalkyl substances (PFAS) has been associated with toxicity in wildlife and negative health effects in humans. Decades of fire training activity at Joint Base Cape Cod (MA, USA) incorporated the use of aqueous film-forming foam (AFFF), which resulted in long-term PFAS contamination of sediments, groundwater, and hydrologically connected surface waters. To explore the bioconcentration potential of PFAS in complex environmental mixtures, a mobile laboratory was established to evaluate the bioconcentration of PFAS from AFFF-impacted groundwater by flow-through design. Fathead minnows (n = 24) were exposed to PFAS in groundwater over a 21-day period and tissue-specific PFAS burdens in liver, kidney, and gonad were derived at three different time points. The ∑PFAS concentrations in groundwater increased from approximately 10,000 ng/L at day 1 to 36,000 ng/L at day 21. The relative abundance of PFAS in liver, kidney, and gonad shifted temporally from majority perfluoroalkyl sulfonamides (FASAs) to perfluoroalkyl sulfonates (PFSAs). By day 21, mean ∑PFAS concentrations in tissues displayed a predominance in the order of liver > kidney > gonad. Generally, bioconcentration factors (BCFs) for FASAs, perfluoroalkyl carboxylates (PFCAs), and fluorotelomer sulfonates (FTS) increased with degree of fluorinated carbon chain length, but this was not evident for PFSAs. Perfluorooctane sulfonamide (FOSA) displayed the highest mean BCF (8700 L/kg) in day 21 kidney. Suspect screening results revealed the presence of several perfluoroalkyl sulfinate and FASA compounds present in groundwater and in liver for which pseudo-bioconcentration factors are also reported. The bioconcentration observed for precursor compounds and PFSA derivatives detected suggests alternative pathways for terminal PFAS exposure in aquatic wildlife and humans. Environ Toxicol Chem 2024;43:1795-1806. © 2024 The Author(s). Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

PFAS-Contaminated Pesticides Applied near Public Supply Wells Disproportionately Impact Communities of Color in California.

Contaminated drinking water from widespread environmental pollutants such as perfluoroalkyl and polyfluoroalkyl substances (PFAS) poses a rising threat to public health. PFAS monitoring in groundwater is limited and fails to consider pesticides found to contain PFAS as a potential contamination source. Given previous findings on the disproportionate exposure of communities of Color to both pesticides and PFAS, we investigated disparities in PFAS-contaminated pesticide applications in California based on community-level sociodemographic characteristics. We utilized statewide pesticide application data from the California Department of Pesticide Regulation and recently reported concentrations of PFAS chemicals detected in eight pesticide products to calculate the areal density of PFAS applied within 1 km of individual community water systems' (CWSs) supply wells. Spatial regression analyses suggest that statewide, CWSs that serve a greater proportion of Latinx and non-Latinx People of Color residents experience a greater areal density of PFAS applied and greater likelihood of PFAS application near their public supply wells. These results highlight agroecosystems as potentially important sources of PFAS in drinking water and identify areas that may be at risk of PFAS contamination and warrant additional PFAS monitoring and remediation.

Challenges and Remediation Strategies for Per- and Polyfluoroalkyl Substances (PFAS) Contamination in Composting

Abstract: Municipal solid waste (MSW) is projected to rise to 3.4 billion tonnes by 2050, with only 33% undergoing environmentally friendly management practices. Achieving a circular economy involves sustainable approaches, among which diverting waste from landfills to composting plays a crucial role. However, many of the products society uses and discards in MSW daily contain per- and polyfluoroalkyl substances (PFAS), raising concerns that composts may inadvertently introduce PFAS into the environment, posing a significant challenge to waste management and environmental sustainability. PFAS have been detected in compost at concentrations ranging between 1.26–11.84 µg/kg. Composts are therefore a source of PFAS contamination, posing risks to human and ecosystem health. Impactful technologies are therefore required for PFAS remediation during the composting process. This review examines the composting process as a sustainable organic waste management technology, examining the various systems employed, compost quality, and uses, particularly emphasising the challenge posed by PFAS contamination. The review provides novel insights into possible PFAS remediation technologies. A comprehensive understanding of PFAS origin, fate, and transformation during the composting process is lacking, creating substantial knowledge gaps regarding the inputs processes contributing most to PFAS accumulation in the final product. Addressing these gaps in future studies is crucial for minimising PFAS discharge into the environment and developing an effective remediation approach. This review highlights the urgent need for innovative solutions to mitigate PFAS contamination in compost and the importance of advancing research and technology to achieve sustainable waste management objectives.

Ways to improve understanding of PFAS contamination - A case study within a waste management facility

Waste management facilities are a known source for per- and polyfluoroalkyl substances (PFAS) to the environment. In this study, water samples from seven subsections within a waste management facility in Sweden were analyzed for PFAS and extractable organofluorine (EOF). Oxidative conversion was used to investigate how much PFAS precursors could contribute to the EOF. Out of the 23 analyzed PFAS, ten compounds accounted for a major proportion of the concentrations. Before oxidative conversion the ∑10PFAS were between 0.44 μg/L and 17 μg/L. The EOF ranged from 2 μg/L F up to 79 μg/L F. There was a greater difference in concentrations and profiles between the subsections in comparison to the four sampling dates at respective sampling point, suggesting different sources of PFAS from the waste. Oxidative conversion revealed presence of precursors by elevated concentrations of perfluoroalkyl acids after oxidation, which increased the explained EOF up to 25%. Seven samples from one sampling date were selected to investigate if other fluorinated compounds (inorganic anions, ultra-short-chain PFAS, and zwitterions) could be a part of the unexplained EOF fraction. The contribution of fluorine from tetrafluoroborate and hexafluorophosphate were equal or higher proportions than the ∑10PFAS. The presence of the ionic liquids tetrafluoroborate and hexafluorophosphate could originate from battery waste, due to their use as counter ions in batteries. Ultra-short-chain PFAS increased the explained EOF by an average of 8%, with trifluoroacetic acid and trifluoromethane sulfonic acid being the main contributors. However, the reported concentrations of ultra-short-chain PFAS, were underestimated due to low recovery by the additional washing step to remove inorganic fluoride for EOF analysis. The concentrations of zwitterions were low and increased the explained EOF by < 1%. Our results suggest that EOF, selected PFAS, oxidative conversion and anionic fluorinated substances give a better picture of PFAS contamination.

Legacy and emerging per- and polyfluoroalkyl substances (PFASs) in agricultural soils affected by fluorochemical manufacturing facilities, North China: Occurrence, region-specific distribution, substitution trend and source appointment

Accompanied with restriction of legacy per- and polyfluoroalkyl substances (PFASs), numbers of emerging PFASs are widely detected in the environment. However, information on environmental occurrences and behaviors of emerging PFASs were scarce in agricultural soils. In this study, the spatial distributions, sources, substitution trends and ecological risk assessment of 31 legacy and emerging PFASs were investigated in 69 agricultural soils from Fuxin, North China. The 26 out of 31 PFASs were detected with concentrations of 57.36 - 1271.06 pg/g dry weight. Perfluorooctanoic acid (PFOA) and hexafluoropropylene oxide dimer acid (HFPO-DA) were predominant in legacy and emerging PFASs, respectively. Based on principal component and dual carbon-nitrogen stable isotope analysis, atmosphere, fluorochemical activities and river irrigation were main sources of PFASs. Substitution trends indicated HFPO-DA and short chain perfluoroalkyl carboxylic acids (C4 - C7) as main alternatives of PFOA, and 6:2 fluorotelomer sulfonic acid (6:2 FTSA) and sodium p-perfluorous nonenoxybenzene sulfonate (OBS) as major substitutes to perfluorooctanesulfonic acid (PFOS). The calculated risk quotient values (< 0.006) only indicated potential low ecological risk of 7 target PFASs in agricultural soils. The results of this study broadened out the information of PFAS contamination in agricultural soils, which were significant for PFAS supervision in China.

The complex effect of dissolved organic carbon on desorption of per- and poly-fluoroalkyl substances from soil under alkaline conditions

Per- and poly-fluoroalkyl substances (PFASs) are contaminants of emerging concern, yet the understanding of factors that control their leaching and release from contaminated soils remains limited. This study aimed to investigate the impact of dissolved organic carbon (DOC) on the release of PFASs—specifically, perfluorohexane sulfonate (PFHxS), perfluorooctane sulfonate (PFOS), and perfluorooctanoic acid (PFOA)from soils contaminated by aqueous film forming foam (AFFF). Batch aqueous leaching experiments were conducted on AFFF-contaminated soils under alkaline solution conditions (pH 9.5, 10.5, and 12) as it enhances leaching of both PFAS and DOC. Leaching of PFOS was significantly increased under alkaline conditions. Although the leaching of PFAS generally increased with pH, PFOS appeared to be more retained under the very alkaline pH conditions used in this study. At the same solution pH, leaching of PFOS and DOC was less in Ca(OH)2 than in NaOH. The retention of PFOS under these conditions may be attributable to the shielding of the negative charge of the soil components and colloids (e.g., DOC and clay minerals) in the leachates and/or the screening of negative charges on head groups of PFOS due to the high concentration of divalent cations. Solution chemistry affected desorption of PFOS more than PFHxS and PFOA. The study highlights that the influence of DOC on PFAS leaching and transport can be very complex, and depends on leachate chemistry (e.g., pH and cation type), PFAS chemistry, the magnitude of PFAS contamination and factors that influence the solid:liquid partitioning of organic carbon in soil.

Identification and quantification of novel per- and polyfluoroalkyl substances (PFAS) contamination in a Great Lakes urban-dominated watershed

Per- and polyfluoroalkyl substances (PFAS) are a large group of synthetic organic fluoro-compounds that are oil-, water-, and flame-resistant, making them useful in a wide range of commercial and consumer products, as well as resistant to environmental degradation. To assess the impact of urbanization and wastewater treatment processes, surface water and sediment samples were collected at 27 sites within the Great Lakes in the Lake Huron to Lake Erie corridor (HEC), an international waterway including the highly urbanized Detroit and Rouge Rivers. Samples were analyzed for 92 PFAS via UHPLC-MS/MS. Our previous data in the HEC found the highest amount of PFAS contamination at the Rouge River mouth. In addition to evaluating the input of the Rouge River into the HEC, we evaluated the transport of PFAS into the HEC from other major tributaries. PFAS were detected in both surface water and sediment at all sites in this study, with a total of 10 congeners quantified in all surface water samples and 16 congeners quantified in all sediment samples, indicating ubiquitous contamination. Perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) were pervasive in the HEC as these two compounds were detected in all sites and matrices, often at concentrations above the US EPA's recommended lifetime interim updated health advisories. Surface water samples contained more perfluorohexanoic acid (PFHxA) than any other congener, with average aqueous PFHxA across all surface water samples exceeding the average concentration previously reported in the Great Lakes. Sediment samples were dominated by PFOS, but novel congeners, notably 3-Perfluoropentyl propanoic acid (FPePA), were also quantified in sediment. The Rouge River and other tributaries contribute significantly to the PFAS burden in the HEC including Lake Erie. Overall, our results indicate the need for expanding toxicological research and risk assessment focused on congeners such as PFHxA and PFAS mixtures, as well as regulation that is tighter at the onset of production and encompasses PFAS as a group at a national level.

Determinants of per- and polyfluoroalkyl substances (PFAS) exposure among Wisconsin residents

BackgroundPer- and polyfluoroalkyl substances (PFAS) include thousands of manufactured compounds with growing public health concerns due to their potential for widespread human exposure and adverse health outcomes. While PFAS contamination remains a significant concern, especially from ingestion of contaminated food and water, determinants of the variability in PFAS exposure among regional and statewide populations in the United States remains unclear. ObjectivesThe objective of this study was to leverage The Survey of the Health of Wisconsin (SHOW), the only statewide representative cohort in the US, to assess and characterize the variability of PFAS exposure in a general population. MethodsThis study sample included a sub-sample of 605 adult participants from the 2014–2016 tri-annual statewide representative sample. Geometric means for PFOS, PFOA, PFNA, PFHxS, PFPeS, PFHpA, and a summed measure of 38 analyzed serum PFAS were presented by demographic, diet, behavioral, and residential characteristics. Multivariate linear regression was used to determine significant predictors of serum PFAS after adjustment. ResultsOverall, higher serum concentrations of long-chain PFAS were observed compared with short-chain PFAS. Older adults, males, and non-Hispanic White individuals had higher serum PFAS compared to younger adults, females, and non-White individuals. Eating caught fish in the past year was associated with elevated levels of several PFAS. DiscussionThis is among the first studies to characterize serum PFAS among a representative statewide sample in Wisconsin. Both short- and long-chain serum PFAS were detectable for six prominent PFAS. Age and consumption of great lakes fish were the most significant predictors of serum PFAS. State-level PFAS biomonitoring is important for identifying high risk populations and informing state public health standards and interventions, especially among those not living near known contamination sites.

Unregulated contaminants in drinking water: Evidence from PFAS and housing prices

Our understanding of individuals’ response to information about unregulated contaminants is limited. We leverage the highly publicized social discovery of unregulated PFAS (per- and polyfluoroalkyl substances) contamination in public drinking water to study the impact of information about unregulated contaminants on housing prices. Using residential property transaction data, we employ a difference-in-differences research design and show that high profile media coverage about PFAS contamination significantly decreased property values of affected homes. We also find suggestive evidence of residential sorting that may have worsened environmental inequality.

Characterization of per- and polyfluoroalkyl substances (PFAS) and other constituents in MSW landfill leachate from Puerto Rico

Elevated per- and polyfluoroalkyl substance (PFAS) concentrations have been reported in municipal solid waste (MSW) landfill leachate with higher levels in wet and warmer subtropical climates. Information about landfill leachate characteristics is much more limited in tropical climates. In this study, 20 landfill leachate samples were collected from three MSW landfills on the tropical island of Puerto Rico and results were compared against landfills nationally and within Florida, USA. The samples collected in Puerto Rico underwent physical-chemical analysis, as well as a quantitative analysis of 92 PFAS. Samples described in this study include discrete leachate types, such as leachate, gas condensate, and leachate which has undergone on-site treatment (e.g., RO treatment, phytoremediation, lagoons). A total of 51 PFAS were detected above quantitation limits, including perfluorohexylphosphonic acid, a perfluoroalkyl acid (PFAA) which has not been reported previously in landfill leachate. ∑PFAS concentrations in this study (mean: 38,000 ng L−1), as well as concentrations of individual PFAS, are significantly higher than other reported MSW landfill leachate concentrations. The profiles of leachates collected from on-site treatment systems indicate possible transformation of precursor PFAS as a result of treatment processes – oxidizing conditions, for example, may facilitate aerobic transformation, increase the concentrations of PFAAs, and possibly increase the apparent ∑PFAS concentration. Extreme climate events, including rising temperatures and more frequent hurricanes, have placed additional strain on the solid waste management infrastructure on the island – adding complexity to an already challenging PFAS management issue. As concern grows over PFAS contamination in drinking water, these findings should inform solid waste and leachate management decisions in order to minimize PFAS emissions in island environments.

Investigating hydrodynamic cavitation as an efficient means for removal of per- and polyfluoroalkyl substances from solution

With nearly five decades of per- and polyfluoroalkyl substances (PFASs) being associated with firefighting and industrial activities, these compounds inevitably accumulate in both ground and surface water. PFAS contamination in water has emerged as a significant environmental and public health concern, particularly perfluorooctanesulfonic acid (PFOS), which is often found in higher concentrations compared to other PFAS and has more pronounced adverse health effects. Addressing PFAS contamination requires treating large volumes of water, making technologies that rapidly separate and concentrate PFASs highly favoured. The strong surface activity of PFAS, such as PFOS, enables them to generate colloidal gas aphrons (CGAs) during high shear mixing of their aqueous solutions, where PFASs can be separated and collected as foam. This study aims to evaluate the effectiveness of high shear mixing in separating PFOS from solution, leveraging its accumulation at air–water interfaces. High shear-assisted PFOS separation was tested by varying parameters like rotational speed (4000 to 10,000 rpm), mixing time (30 s to 30 min), and the effect of electrolytes. Results showed greater PFOS separation in the presence of electrolytes, particularly monovalent cations like Na+, compared to divalent cations such as Ca2+, due to the creation of more stable CGAs with smaller sizes. At a mixing rate of 6000 rpm, 85 % of PFOS was removed in 30 s from a highly contaminated PFOS solution (10 mg/L), with over 95 % separation after 5 mixing cycles. While high-shear mixing was efficient in PFOS separation from highly contaminated solutions it was less efficient for low-level contaminated solutions (less than 1 mg/L). These results suggest that hydrodynamic cavitation induced by high-shear mixing seems promising for enhancing the separation of PFOS from heavily contaminated solutions. This technique could serve as a standalone method or be integrated with other PFAS removal technologies to enhance the overall efficiency of PFAS removal from polluted water sources.

Determination of organic fluorinated compounds content in complex samples through combustion ion chromatography methods: a way to define a “Total Per- and Polyfluoroalkyl Substances (PFAS)” parameter?

Emerging contaminants are a growing concern for scientists and public authorities. The group of per-polyfluoroalkyl substances (PFAS), known as ‘forever chemicals', in complex environmental liquid and solid matrices was analysed in this study. The development of global analytical methods based on combustion ion chromatography (CIC) is expected to provide accurate picture of the overall PFAS contamination level via the determination of extractable organic fluorine (EOF) and adsorbable organic fluorine (AOF). The obtained results may be put into perspective with other methods such as targeted analyses (LC-MS/MS). The impact of pH, the presence of dissolved organic carbon and suspended particles on AOF measurements were explored. The effectiveness of the washing step to remove adsorbed inorganic fluorine (IF) has been proven for samples containing up to 8 mgF.L−1. CIC-based methods showed good repeatability and reproducibility for the complex matrices studied. Environmental applications of these methods have been tested. AOF and EOF analyses could explain between 1 % and 23 % and 0.1 % to 2 % of total organic fluorine (TOF), respectively. The sum of PFAS compounds expressed as fluorine could explain from 0.2 % to 11 % and from 0.003 % to 5 % for AOF and EOF, respectively. These results also suggest that some fluorinated compounds are not adsorbed or extractable and/or lost by volatilisation during the application of AOF and EOF analytical procedure. These findings highlight that AOF and EOF are not entirely efficient as proxy to assess “total PFAS” for assessing environmental contamination by PFAS. However, these methods could still be applied to gain a better understanding of the sources and fate of PFAS in the environment.

Incidence of per- and polyfluoroalkyl substances (PFAS) in private drinking water supplies in Southwest Virginia, USA

Per- and polyfluoroalkyl substances (PFAS) are a class of man-made contaminants of human health concern due to their resistance to degradation, widespread environmental occurrence, bioaccumulation in living organisms, and potential negative health impacts. Private drinking water supplies may be uniquely vulnerable to PFAS contamination in impacted areas, as these systems are not protected under federal regulations and often include limited treatment or remediation, if contaminated, prior to use. The goal of this study was to determine the incidence of PFAS contamination in private drinking water supplies in two counties in Southwest Virginia, USA (Floyd and Roanoke) that share similar bedrock geologies, are representative of different state Department of Health risk categories, and to examine the potential for reliance on citizen-science based strategies for sample collection in subsequent efforts. Samples for inorganic ions, bacteria, and PFAS analysis were collected on separate occasions by participants and experts at the home drinking water point of use (POU) for comparison. Experts also collected outside tap samples for analysis of 30 PFAS compounds. At least one PFAS was detectable in 95 % of POU samples collected (n = 60), with a mean total PFAS concentration of 23.5 ± 30.8 ppt. PFOA and PFOS, two PFAS compounds which presently have EPA health advisories, were detectable in 13 % and 22 % of POU samples, respectively. On average, each POU sample contained >3 PFAS compounds, and one sample contained as many as 8 compounds, indicating that exposure to a mixture of PFAS in drinking water may be occurring. Although there were significant differences in total PFAS concentrations between expert and participant collected samples (Wilcoxon, alpha = 0.05), collector bias was inconsistent, and may be due to the time of day of sampling (i.e. morning, afternoon) or specific attributes of a given home. Further research is required to resolve sources of intra-sample variability.

Integration of ultrashort-chain compounds into the biomonitoring of per- and polyfluorinated substances in human plasma and serum

Ultrashort-chain (USC) per- and polyfluoroalkyl substances (PFAS) are small and very polar compounds with carbon chain lengths of shorter than C4. Their ubiquitous and high levels of occurrence in environmental aquatic systems have raised significant concern in conjunction with long-chain PFAS contamination. Measuring USC PFAS in blood can not only monitor human exposure but also serves as a valuable tool for studying the potential risks associated with USC PFAS exposure. The high polarity of USC PFAS poses a challenge to current analytical practices based on the reversed-phase liquid chromatography, primarily due to insufficient chromatographic retention. In this study, a simple and reliable workflow was developed for the simultaneous analysis of C1 to C10 perfluoroalkyl carboxylic and sulfonic acids, along with four alternative PFAS, in human plasma and serum. The chromatographic analysis was conducted using a polar-embedded reversed-phase LC column. Fetal bovine serum (FBS) was chosen for method validation due to its absence of all analytes, except for trifluoroacetic acid (TFA). Subsequently, a TFA isotope, 13C-TFA, was employed as a surrogate to assess the method accuracy for TFA in FBS. A single-step sample preparation procedure, conducted by mixing 100 µL of FBS with 200 µL of methanol, was demonstrated to be effective for the accurate and precise analysis of fortified FBS samples. Ten isotopes of C3 to C10 PFAS, serving as extracted internal standards, were added to the samples at 1 ppb to validate the accuracy of the entire workflow. Calibration standards were prepared in reverse osmosis water due to its cleanliness for all analytes. Phosphate-buffered saline was incorporated into the calibration standard solution to achieve similar chromatographic performance between standard and sample solutions. The calibration ranges varied among different analytes, spanning from 0.05 – 40 ppb, 0.1 – 40 ppb, 0.25 – 40 ppb, and 0.5 – 40 ppb. Method accuracy and precision were evaluated at three fortification levels, ranging from 0.4 to 30 ppb. All analytes and extracted internal standards exhibited recovery values within 20 % of the nominal concentration across all fortification levels. Satisfactory method precision was demonstrated with%RSD values <12 %. The validated method was applied to measure PFAS in NIST 1950 and 1957 standard reference human plasma and serum, affirming the established workflow is suitable for accurate quantification of C1 to C10 PFAS in human plasma and serum matrices.