Poly Ethylene Oxide Research Articles

Novel PEO-based Solid Polymer Electrolyte with High Elasticity and High Ionic Conductivity for Room Temperature Lithium Metal Batteries

Abstract The development and application of polyethylene oxide (PEO) based solid polymer electrolyte (SPE) is severely constrained by its low ionic conductivity and poor tensile resistance. To improve the electrochemical performance of SPE without losing its mechanical properties, a benzene sulfonate-based additive is adopted into crosslinking system composed of -CH2-CH2-O- segments to obtain a membrane with a high ionic conductivity of 1.47×10-4 S cm-1 and an ionic transference number of 0.70 at room temperature. The activation energy value of 0.128 eV gives evidence for a favorable migration mechanism of PTH-SPE. Anti-dendrite growth and contact optimization can be realized by molecular structure design with a tensile elongation of 490%. The reversible overpotential of Li||Li symmetric cell within 1000 h demonstrates that the compact PTH-SPE can inhibit the growth of lithium dendrite. This work provides a new strategy for designing high-performance solid electrolytes for room temperature via a green solvent-free method.

Influence of Screw Design and Process Parameters on the Product Quality of PEO:LiTFSI Solid Electrolytes Using Solvent-Free Melt Extrusion

All-solid-state battery (ASSB) technology is a new energy system that reduces the safety concerns and improves the battery performance of conventional lithium-ion batteries (LIB). The increasing demand for such new energy systems makes the transition from laboratory scale production of ASSB components to larger scale essential. Therefore, this study investigates the dry extrusion of poly(ethylene oxide):lithium bis (trifluoromethylsulfonyl)imide (PEO:LiTFSI) all-solid-state electrolytes at a ratio of 20:1 (EO:Li). We investigated the influence of different extruder setups on the product quality. For this purpose, different screw designs consisting of conveying, kneading and mixing elements are evaluated. To do so, a completely dry and solvent-free production of PEO:LiTFSI electrolytes using a co-rotating, intermeshing, twin-screw extruder under an inert condition was successfully carried out. The experiments showed that the screw design consisting of kneading elements gives the best results in terms of process stability and homogeneous mixing of the electrolyte components. Electrochemical impedance spectroscopy was used to determine the lithium-ion conductivity. All electrolytes produced had an ionic conductivity (σionic) of (1.1–1.8) × 10−4 S cm−1 at 80 °C.

The Incorporated Drug Affects the Properties of Hydrophilic Nanofibers

Hydrophilic nanofibers offer promising potential for the delivery of drugs with diverse characteristics. Yet, the effects of different drugs incorporated into these nanofibers on their properties remain poorly understood. In this study, we systematically explored how model drugs, namely ibuprofen, carvedilol, paracetamol, and metformin (hydrochloride), affect hydrophilic nanofibers composed of polyethylene oxide and poloxamer 188 in a 1:1 weight ratio. Our findings reveal that the drug affects the conductivity and viscosity of the polymer solution for electrospinning, leading to distinct changes in the morphology of electrospun products. Specifically, drugs with low solubility in ethanol, the chosen solvent for polymer solution preparation, led to the formation of continuous nanofibers with uniform diameters. Additionally, the lower solubility of metformin in ethanol resulted in particle appearance on the nanofiber surface. Furthermore, the incorporation of more hydrophilic drugs increased the surface hydrophilicity of nanofiber mats. However, variations in the physicochemical properties of the drugs did not affect the drug loading and drug entrapment efficiency. Our research also shows that drug properties do not notably affect the immediate release of drugs from nanofibers, highlighting the dominant role of the hydrophilic polymers used. This study emphasizes the importance of considering specific drug properties, such as solubility, hydrophilicity, and compatibility with the solvent used for electrospinning, when designing hydrophilic nanofibers for drug delivery. Such considerations are crucial for optimizing the properties of the drug delivery system, which is essential for achieving therapeutic efficacy and safety.

Acrylates and Methacrylates Sensitization in Patients with Orthopedic and Dental Prostheses: Asymptomatic Pre-Implant and Symptomatic Post-Implant Testing.

Acrylates and methacrylates are widely used in dental and orthopedic prostheses, false nails, adhesives, glues, and paints, and are strong sensitizers. The aim of our study was to assess the prevalence of acrylate sensitization in patients before the application of dental or orthopedic prostheses or after the application in case of potentially related contact dermatitis. Methods: The subjects were tested according to haptens reported in safety data sheets, including methyl methacrylate (MMA) 5%, methyl acrylate (MA) 1%, ethyl methacrylate (EMA) 2%, ethyl acrylate (EA) 1%, butylacrylate 0.1%, 2 hydroxyethyl methacrylate (HEMA) 5%, ethylene glycol dimethacrylate 2% (EGDMA), tetraethylene glycol dimethacrylate 2% (TEGDMA), and dimethyl amino ethyl methacrylate 0.2% (DAEMA). Multivariable logistic regression was used to study the factors associated with (meth)acrylate sensitization. Results: Six hundred sixty-five patients (75.4% of the total sample) without contact dermatitis before the placement of any dental or orthopedic prosthesis and 217 patients (24.6% of the total sample) with contact dermatitis potentially due to already placed prostheses were involved. In total, 37 cases of patch test positivity to at least 1 acrylate (4.2%) were found. In the pre-implant population, previous dermatitis and respiratory allergy were associated with increased sensitization to acrylates in multivariable regression analysis (odds ratio [OR] 2.38, 95% confidence interval [CI] 1.05-5.39; OR 2.96, 95% CI 1.32-6.64, respectively). The prevalence of sensitization was 3.5% for EGDMA, 2.7% for EA, 1.5% for 2-HEMA, 1.4% for both MA and MMA, 1.28% for DAEMA, and 0.8% for EMA. No statistically significant difference was found in the prevalence of sensitization between the pre- and post-implant groups. Discussion: Our study found a similar profile of sensitization in pre-implant and post-implant patients, suggesting the need to better study the specificity and sensitivity of patch tests to (meth)acrylate and to define relevance considering a detailed history of exposure.

A journey through the history of PEGylated drug delivery nanocarriers.

This note aims to inspire through providing a personal view of the development and potential Drug Delivery Nanocarriers functionalized with polythyleneglycol (PEG). This polymer has been used extensively in Pharmaceutical Technology in a variety of compositions, including polyethylene oxide (PEO)-based surfactants. However, the concept of PEGylation, which started in the 70's, differs from the functionality of a surfactant, already discloses in the 50's. Here, we strictly adhere to the biological functionality of PEGylated nanocarriers intended to have a reduced interaction with proteins and, therefore, modify their biodistribution as well as facilitate their diffusion across mucus and other biological barriers. We analyze how this concept has evolved over the years and the benefit obtained so far in terms of marketed nanomedicines and provide the readers with a prospect view of the topic.

Synergistic Nanomedicine Delivering Topoisomerase I Toxin (SN-38) and Inhibitors of Polynucleotide Kinase 3'-Phosphatase (PNKP) for Enhanced Treatment of Colorectal Cancer.

Inhibitors of a DNA repair enzyme known as polynucleotide kinase 3'-phosphatase (PNKP) are expected to show synergistic cytotoxicity in combination with topoisomerase I (TOP1) inhibitors in cancer. In this study, the synergistic cytotoxicity of a novel inhibitor of PNKP, i.e., A83B4C63, with a potent TOP1 inhibitor, i.e., SN-38, against colorectal cancer cells was investigated. Polymeric micelles (PMs) for preferred tumor delivery of A83B4C63, developed through physical encapsulation of this compound in methoxy poly(ethylene oxide)-poly(α-benzyl carboxylate-ε-caprolactone) (mPEO-b-PBCL) micelles, were combined with SN-38 in free or PM form. The PM form of SN-38 was prepared through chemical conjugation of SN-38 to the functional end group of mPEO-b-PBCL and further assembly of mPEO-b-PBCL-SN-38 in water. Moreover, mixed micelles composed of mPEO-b-PBCL and mPEO-b-PBCL-SN-38 were used to co-load A83B4C63 and SN-38 in the same nanoformulation. The loading content (% w/w) of the SN-38 and A83B4C63 to mPEO-b-PBCL in the co-loaded formulation was 7.91 ± 0.66 and 16.13 ± 0.11% (w/w), respectively, compared to 15.67 ± 0.34 (% w/w) and 23.06 ± 0.63 (% w/w) for mPEO-b-PBCL micelles loading individual drugs. Notably, the average diameter of PMs co-encapsulating both SN-38 and A83B4C63 was larger than that of PMs encapsulating either of these compounds alone but still lower than 60 nm. The release of A83B4C63 from PMs co-encapsulating both drugs was 76.36 ± 1.41% within 24 h, which was significantly higher than that of A83B4C63-encapsulated micelles (42.70 ± 0.72%). In contrast, the release of SN-38 from PMs co-encapsulating both drugs was 44.15 ± 2.61% at 24 h, which was significantly lower than that of SN-38-conjugated PMs (74.16 ± 3.65%). Cytotoxicity evaluations by the MTS assay as analyzed by the Combenefit software suggested a clear synergy between PM/A83B4C63 (at a concentration range of 10-40 μM) and free SN-38 (at a concentration range of 0.001-1 μM). The synergistic cytotoxic concentration range for SN-38 was narrowed down to 0.1-1 or 0.01-1 μM when combined with PM/A83B4C63 at 10 or 20-40 μM, respectively. In general, PMs co-encapsulating A83B4C63 and SN-38 at drug concentrations within the synergistic range (10 μM for A83B4C63 and 0.05-1 μM for SN-38) showed slightly less enhancement of SN-38 anticancer activity than a combination of individual micelles, i.e., A83B4C63 PMs + SN-38 PMs at the same molar concentrations. This was attributed to the slower release of SN-38 from the SN-38 and A83B4C63 co-encapsulated PMs compared to PMs only encapsulating SN-38. Cotreatment of cells with TOP1 inhibitors and A83B4C63 formulation enhanced the expression level of γ-HA2X, cleaved PARP, caspase-3, and caspase-7 in most cases. This trend was more consistent and notable for PMs co-encapsulating both A83B4C63 and SN-38. The overall result from the study shows a synergy between PMs of SN-38 and A83B4C63 as a mixture of two PMs for individual drugs or PMs co-encapsulating both drugs.

Optimization of Microfluidics for Point-of-Care Blood Sensing

Blood tests are widely used in modern medicine to diagnose certain illnesses and evaluate the overall health of a patient. To enable testing in resource-limited areas, there has been increasing interest in point-of-care (PoC) testing devices. To process blood samples, liquid mixing with active pumps is usually required, making PoC blood testing expensive and bulky. We explored the possibility of processing approximately 2 μL of whole blood for image flow cytometry using capillary structures that allowed test times of a few minutes without active pumps. Capillary pump structures with five different pillar shapes were simulated using Ansys Fluent to determine which resulted in the fastest whole blood uptake. The simulation results showed a strong influence of the capillary pump pillar shape on the chip filling time. Long and thin structures with a high aspect ratio exhibited faster filling times. Microfluidic chips using the simulated pump design with the most efficient blood uptake were fabricated with polydimethylsiloxane (PDMS) and polyethylene oxide (PEO). The chip filling times were tested with 2 μL of both water and whole blood, resulting in uptake times of 24 s for water and 111 s for blood. The simulated blood plasma results deviated from the experimental filling times by about 35% without accounting for any cell-induced effects. By comparing the flow speed induced by different pump pillar geometries, this study offers insights for the design and optimization of passive microfluidic devices for inhomogenous liquids such as whole blood in sensing applications.

In Situ Surface-Enhanced Raman Spectroscopy on Organic Mixed Ionic-Electronic Conductors: Tracking Dynamic Doping in Light-Emitting Electrochemical Cells.

In the domain of organic mixed ionic-electronic conductors (OMIECs), simultaneous transport and coupling of ionic and electronic charges are crucial for the function of electrochemical devices in organic electronics. Understanding conduction mechanisms and chemical reactions in operational devices is pivotal for performance enhancement and is necessary for the informed and systematic development of more promising materials. Surface-enhanced Raman spectroscopy (SERS) is a potent tool for monitoring electrochemical evolution and dynamic doping in operational devices, offering enhanced sensitivity to subtle spectral changes. We demonstrate the utility of SERS for in situ tracking of doping in OMIECs in an organic light-emitting electrochemical cell (LEC) containing a conjugated polymer (poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]; MEH-PPV), a molecular anion (lithium triflate), and an electrolyte network (poly(ethylene oxide); PEO). SERS enhancement is achieved via an interleaved layer of gold particles formed by spontaneous breakup of a deposited thin gold film. The results successfully highlight the ability of SERS to unveil time-resolved MEH-PPV doping and polaron formation, elucidating the effects of triflate ion transfer in the operating device and validating the electrochemical doping model in LECs.

A new two-dimensional, spiropyran-based polymer fluorescent nanoprobe with quantitative-fluorescent and photochromic properties for multi-substance detection.

One challenge of the structural design of a fluorescent probe is how to improve the detection performance on trace target analytes in complex samples. Herein a new polymer fluorescent nanoprobe (2DSP-C28) has been synthesized, by adopting a two-dimensional (2D), spiropyran (SP)-based nanosheet structure with hydrophobic long-chain alkanes (C28). Unlike a traditional spiropyran-based small molecule probe, the 2DSP-C28 probe can exhibit quantitative-fluorescent and photochromic properties. Under the detection of metal-ions, the nanoprobe in DMSO aqueous solution is selectively fluorescent-quenched-responsive for Fe-ions (~100 μM), with a characteristic stoichiometric ratio (SR) of <10, a high sensitivity (LOD: ~ 0.2 μM). When the nanoprobe is incorporated into electrospun polyethylene oxide (PEO), it can be used for gas detection, and display a color-change with acid-base gas and identify the HF gas. It is expected that this new polymer fluorescent nanoprobe can be promisingly applied for rapidly environmental monitoring on the ion or gas pollution.

Coconstruction of Supramolecular Lithium-Conducting Cross-Linked Networks Based on PVDF and Triblock Polymer Nanomicrosphere Solid-State Polymer Electrolytes for Lithium-Metal Batteries.

Uneven lithium plating and low ionic conductivity currently impede the realization of high-capacity rechargeable lithium metal batteries. And the conventional poly(ethylene oxide) (PEO) solid-state electrolytes are unsuitable for high-energy-density Li anode applications due to their low lithium-ion transference number and high reactivity with Li metal, leading to detrimental dendrite formation and potentially hazardous exothermic reactions with the electrolyte. In this study, we employ a supramolecular approach to develop a novel polymer solid-state electrolyte based on poly(vinylidene fluoride) (PVDF) and a novel triblock polymer nanomicrosphere, (poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone), (PCL-PEG-PCL). The abundance of carbonyl and ether-oxygen functional groups in PCL-PEG-PCL enhances the lithium coordination environment within the polymer solid-state electrolyte. Additionally, the original C-F moieties of PVDF form hydrogen bonds with C-H and terminal hydroxyl groups in PCL-PEG-PCL, collectively creating a multichannel fast Li+-conducting supramolecular cross-linked network. The resulting electrolyte demonstrates a high ionic conductivity of 1.4 × 10-3 S cm-1 and an extended electrochemical window of 5.2 V. Moreover, the electrolyte exhibits a high lithium-ion transference number (tLi+ = 0.63) at room temperature and exhibits excellent interfacial compatibility with the lithium metal anode. For the resulting electrolyte utilized in LiFePO4 batteries, the capacity retention of the cells assembled with this electrolyte exceeds 91.3% after 1000 cycles at 25 °C and 2 C (0.281 mA cm-2).

Synthesis, Optical Performance Characterization, and Durability of Electrospun PTFE-PEO Materials for Space Applications.

Passive heat management is crucial in space, especially for extended missions involving protection from sunlight. Thermal coatings with desirable optical properties can drastically reduce the power consumed by active cooling systems, thereby reserving more resources for other critical systems onboard. Specifically, materials with wavelength-dependent reflectance and emittance are desirable for managing incident sunlight and self-cooling by thermal emission. This study demonstrates the use of polymer nanofibers, specifically poly(tetrafluoroethylene) (PTFE), for passive temperature control in space applications. This study describes the electrospinning fabrication process to create nanofibers and how process parameters can be varied to control the fiber geometry. We combine poly(tetrafluoroethylene) (PTFE) and poly(ethylene oxide) (PEO) polymers to fabricate highly reflective thermal control materials by electrospinning. To understand the role of material and fiber geometry, we measure spectral reflectance, absorptance, and transmittance using spectrophotometers interfaced with integrating spheres. We control the materials' fiber geometry and solar reflectance by modifying the solution properties, flow rate, rotating collector speed, and fabrication time. With 220-1560 μm thick electrospun nanofiber materials, we demonstrate an average solar reflectance of 94.73-99.75%, with values approaching 99.9% for thicker samples, which is among the highest for space applications. Meanwhile, a thermal emittance of 81.4% was observed at 300 K for a 3360 μm thick sample. The durability of these samples was also tested under ultraviolet light and atomic oxygen. Compared to the state-of-the-art materials, the electrospun PTFE-PEO fibers present a new paradigm for passive thermal management in space applications.

Functionalized polypropylene separator coated with polyether/polyester blend for high-performance lithium metal batteries

Commercial polyolefin separators used in lithium metal batteries (LMBs) have the disadvantages of insufficient thermal stability and poor wettability with electrolytes, which causes bad safety and battery performance. Poly(ε-caprolactone) (PCL)-based electrolytes have drawn widespread attention in the field of polymer electrolytes owing to their electrochemical stability and high lithium-ion transference number. This work proposes a strategy of functionalizing commercial polypropylene (PP) separator coated by blending PCL (M w ~ 50,000) and poly(ethylene oxide) (PEO, M V ~ 600,000). Compared to commercial PP separators, PP-blended PEO60w/PCL5w separators possess better wettability with electrolytes and electrochemical performances. The initial discharge specific capacity of LiFePO4-based LMBs assembled with PP-blended PEO60w/PCL5w separators reaches 144 mAh g-1 (1C) and 103 mAh g-1 (5C) at room temperature, respectively. Notably, Li/PP-blended PEO60w/PCL5w/LiFePO4 shows an improved capacity retention rate of 77% after 800 cycles, confirming that the functionalized separator with coated PEO/PCL blend has great potential for application in the field of LMBs.

Self‐Extinguishing and Low‐Cost Quasi‐Solid Polymer Electrolyte for Room Temperature Lithium Metal Batteries

Most modification strategies of polyethylene oxide (PEO)‐based solid polymer electrolyte focus on improving the room temperature ionic conductivity, while disregarding its inherent flammability that poses substantial safety hazard. Herein, a self‐extinguishing quasi‐solid‐state polymer electrolyte (PTTF‐SPE), which combines excellent room temperature electrochemical properties and high safety, has been developed by introducing triethyl phosphate (TEP) as a low‐cost and highly effective flame retardant. The cross‐linking structure derived from ‐CH2‐CH2‐O‐ segments of tetramethylene glycol dimethyl ether (TEGDME) and PEO makes a contribution to a high amorphous state of polymer. A robust solid electrolyte interphase (SEI) formed by preferential decomposition of fluoroethylene carbonate (FEC) that acts as a film‐forming additive, which can prevent TEP from degradation at lithium metal anode. The optimized PTTF‐SPE exhibits high ionic conductivity (0.54×10‐3 S/cm) and lithium transference number (0.71) at room temperature. The LiFePO4||Li battery demonstrates excellent cycle life over 500 cycles at 0.5 C with a high average discharge capacity of 131 mAh/g. A symmetric Li||Li battery that operating for 850 hours indicates a good compatibility of PTTF‐SPE towards lithium metal. This work provides a new idea for developing high‐energy‐density and high‐safety lithium‐metal batteries (LMBs) for room temperature.

Scaling of the linear viscoelasticity of entangled poly(ethylene oxide) aqueous solutions

The dynamic modulus of polymer solutions and melts can be expressed as a universal function of reduced frequency when the modulus is scaled by a characteristic value according to the scaling theory of polymer physics. Although the plot of the scaled modulus as a function of the scaled frequency supports the theory, it suffers from considerable scattered distribution of data points around the hypothetical master curve. Compared with the master curve of the time–temperature superposition (TTS) of polymer melts, the master curve of polymer solutions has poor quality. Furthermore, the scale factors of polymer solutions may not show a clear dependency on molecular weight and concentrations. Experimental errors and molecular weight distribution appear to enhance the inaccuracy of the master curve. Therefore, we apply a global optimization for the superposition of the viscoelastic data of polymer solutions with various molecular weights and concentrations. The global optimization resulted in the superposition of data as accurate as that of TTS. Furthermore, the numerically determined shift factors, which were relative scale factors, showed clear dependences on molecular weight and concentrations. We compared our global optimization with previous scaling methodologies.

Anionic Effect on Electrical Transport Properties of Solid Co2+/3+ Redox Mediators.

In a solid-state dye-sensitized solar cell, a fast-ion conducting (σ25°C > 10-4 S cm-1) solid redox mediator (SRM; electrolyte) helps in fast dye regeneration and back-electron transfer inhibition. In this work, we synthesized solid Co2+/3+ redox mediators using a [(1 - x)succinonitrile: x poly(ethylene oxide)] matrix, LiX, Co(tris-2,2'-bipyridine)3(bis(trifluoromethyl) sulfonylimide)2, and Co(tris-2,2'-bipyridine)3(bis(trifluoromethyl) sulfonylimide)3 via the solution-cast method, and the results were compared with those of their acetonitrile-based liquid counterparts. The notation x is a weight fraction (=0, 0.5, and 1), and X represents an anion. The anion was either bis(trifluoromethyl) sulfonylimide [TFSI-; ionic size, 0.79 nm] or trifluoromethanesulfonate [Triflate-; ionic size, 0.44 nm]. The delocalized electrons and a low value of lattice energy for the anions made the lithium salts highly dissociable in the matrix. The electrolytes exhibited σ25°C ≈ 2.1 × 10-3 (1.5 × 10-3), 7.2 × 10-4 (3.1 × 10-4), and 9.7 × 10-7 (6.3 × 10-7) S cm-1 for x = 0, 0.5, and 1, respectively, with X = TFSI- (Triflate-) ions. The log σ-T-1 plot portrayed a linear curve for x = 0 and 1, and a downward curve for x = 0.5. The electrical transport study showed σ(TFSI-) > σ(Triflate-), with lower activation energy for TFSI- ions. The anionic effect increased from x = 0 to 1. This effect was explained using conventional techniques, such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), UV-visible spectroscopy (UV-vis), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA).

Poly‐DADMAC Functionalized Polyethylene Oxide Composite Nanofibrous Mat as Highly Positive Material for Triboelectric Nanogenerators and Self‐Powered Pressure Sensors

AbstractThe triboelectric nanogenerator (TENG) is a promising technology for self‐powered sensors and vibration‐driven energy harvesting, with its development especially influenced by the characteristics of tribomaterials. However, developing tribopositive materials with a strong cationic effect and high electron‐donating capability remains challenging. In this study, a novel polyethylene oxide@poly(diallyldimethylammonium chloride) (PEO@Poly‐DADMAC) composite nanofiber mat (NFM) is successfully fabricated using the electrospinning technique. It functions as a highly tribopositive material, particularly enhancing the performance of nanofiber‐based TENGs (NF‐TENGs). Through investigation of its physical and triboelectric properties, the study revealed that incorporating cationic Poly‐DADMAC with PEO effectively boosts NF‐TENG output by increasing the dielectric constant (twofold), electron‐donating affinities, and surface charge trapping capability. The fabricated NF‐TENG shows excellent output performance generating 980 V, a maximum power density of 5.6 Wm−2, and an ultrahigh sensitivity of 8.923 V kPa−1 which endows composite reliability for power supply and sensing capability. More importantly, the PEO@Poly‐DADMAC‐based self‐powered motion sensor with an NF‐TENG array is successfully demonstrated in multifunctional applications such as athlete activity tracking, and wireless gaming interface control. This study not only offers new insights into optimizing performance and selecting alternative tribomaterials but also provides valuable guidance for developing high‐output TENGs and highly sensitive self‐powered sensors.

Molecular Orientation Behavior of Lyotropic Liquid Crystal-Carbon Dot Hybrids in Microfluidic Confinement.

Lyotropic liquid crystals represent an important class of anisotropic colloid systems. Their integration with optically active nanoparticles can provide us with responsive luminescent media that offer new fundamental and applied solutions for biomedicine. This paper analyzes the molecular-level behavior of such composites represented by tetraethylene glycol monododecyl ether and nanoscale carbon dots in microfluidic channels. Microfluidic confinement allows for simultaneously applying multiple factors, such as flow dynamics, wall effects, and temperature, for the precise control of the molecular arrangement in such composites and their resulting optical properties. The microfluidic behavior of composites was characterized by a set of analytical and modeling tools such as polarized and fluorescent microscopy, dynamic light scattering, and fluorescent spectroscopy, as well as image processing in Matlab. The composites were shown to form tunable anisotropic intermolecular structures in microchannels with several levels of molecular ordering. A predominant lamellar structure of the composites was found to undergo additional ordering with respect to the microchannel axis and walls. Such an alignment was controlled by applying shear and temperature factors to the microfluidic environment. The revealed molecular behavior of the composite may contribute to the synthesis of hybrid organized media capable of polarized luminescence for on-chip diagnostics and biomimetics.

Soluble Fluorinated Cardo Copolyimide as an Effective Additive to Photopolymerizable Compositions Based on Di(meth)acrylates: Application for Highly Thermostable Primary Protective Coating of Silica Optical Fiber.

The development of photocurable compositions is in high demand for the manufacture of functional materials for electronics, optics, medicine, energy, etc. The properties of the final photo-cured material are primarily determined by the initial mixture, which needs to be tuned for each application. In this study we propose to use simple systems based on di(meth)acrylate, polyimide and photoinitiator for the preparation of new photo-curable compositions. It was established that a fluorinated cardo copolyimide (FCPI) based on 2,2-bis-(3,4-dicarboxydiphenyl)hexafluoropropane dianhydride, 9,9-bis-(4-aminophenyl)fluorene and 2,2-bis-(4-aminophenyl)hexafluoropropane (1.00:0.75:0.25 mol) has excellent solubility in di(met)acrylates. This made it possible to prepare solutions of FCPI in such monomers, to study the effect of FCPI on the kinetics of their photopolymerization in situ and the properties of the resulting polymers. According to the obtained data, the solutions of FCPI (23 wt.%) in 1,4-butanediol diacrylate (BDDA) and FCPI (15 wt.%) in tetraethylene glycol diacrylate were tested for the formation of the primary protective coatings of the silica optical fibers. It was found that the new coating of poly(BDDA-FCPI23%) can withstand prolonged annealing at 200 °C (72 h), which is comparable or superior to the known most thermally stable photo-curable coatings. The proposed approach can be applied to obtain other functional materials.

Polydimethylsiloxane Surface Modification of Microfluidic Devices for Blood Plasma Separation.

Over the last decade, researchers have developed a variety of new analytical and clinical diagnostic devices. These devices are predominantly based on microfluidic technologies, where biological samples can be processed and manipulated for the collection and detection of important biomolecules. Polydimethylsiloxane (PDMS) is the most commonly used material in the fabrication of these microfluidic devices. However, it has a hydrophobic nature (contact angle with water of 110°), leading to poor wetting behavior and issues related to the mixing of fluids, difficulties in obtaining uniform coatings, and reduced efficiency in processes such as plasma separation and molecule detection (protein adsorption). This work aimed to consider the fabrication aspects of PDMS microfluidic devices for biological applications, such as surface modification methods. Therefore, we studied and characterized two methods for obtaining hydrophilic PDMS surfaces: surface modification by bulk mixture and the surface immersion method. To modify the PDMS surface properties, three different surfactants were used in both methods (Pluronic® F127, polyethylene glycol (PEG), and polyethylene oxide (PEO)) at different percentages. Water contact angle (WCA) measurements were performed to evaluate the surface wettability. Additionally, capillary flow studies were performed with microchannel molds, which were produced using stereolithography combined with PDMS double casting and replica molding procedures. A PDMS microfluidic device for blood plasma separation was also fabricated by soft lithography with PDMS modified by PEO surfactant at 2.5% (v/v), which proved to be the best method for making the PDMS hydrophilic, as the WCA was lower than 50° for several days without compromising the PDMS's optical properties. Thus, this study indicates that PDMS surface modification shows great potential for enhancing blood plasma separation efficiency in microfluidic devices, as it facilitates fluid flow, reduces cell aggregations and the trapping of air bubbles, and achieves higher levels of sample purity.

Thermal Analysis of the Biodegradable Polymer PVA/PEO Blends

Poly(vinyl alcohol) (PVA) and poly(ethylene) oxide (PEO) are widely used water-soluble and biodegradable polymers that possesses high biocompatibility. In this work PVA/PEO blends were prepared via solution casting method, where the solvent was water. After drying, samples were characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TG). Since DSC could not confirm the possible intermolecular interaction between PVA and PEO, infrared spectroscopy with Fourier transform (FT-IR) was utilized. Finally, the TG analysis revealed that degradation of PVA/PEO blends proceeds through tree stages, similar as neat PVA. Contrary, neat PEO thermally degrade through only one stage showing better thermal stability in comparison to PVA.