Polyethylene Microplastics Research Articles

Advances in Research of the Effects and Mechanisms of Polyethylene Microplastics on Soil Nitrogen Transformation

In the agricultural lands of China, polyethylene is the main component of microplastics （MPs）, with characteristics such as small size, wide distribution, easy accumulation, and difficult degradation. Therefore, it may have an impact on the elemental cycling process of the soil. On the basis of reviewing the key literatures in the past few years, this study systematically analyzed and summarized the key factors and processes of the polyethylene microplastics （PE-MPs） affecting soil nitrogen transformation. On the one hand, PE-MPs directly affected the activities of microorganisms and key enzymes related to soil nitrogen transformation by enriching microorganisms, selecting colonized microbial populations, and releasing additives. On the other hand, PE-MPs had indirect impacts on the activities of microorganisms and key enzymes related to soil nitrogen transformation by affecting soil physicochemical properties of soil and changing the microenvironment for microbial growth. Moreover, phthalates, an important additive of the MPs, may be the key factor affecting soil nitrogen transformation in the short-term. Finally, we posed key scientific issues that should be further studied in order to provide scientific support for nitrogen nutrition regulation and ecological risk assessment of soils contaminated by PE-MPs.

Mitigating the detrimental impacts of low- and high-density polyethylene microplastics using a novel microbial consortium on a soil-plant system: Insights and interactions

The accumulation of polyethylene microplastics (PE-MPs) in soil has raised considerable concerns; however, the effects of their persistence and mitigation on agroecosystems have not been explored. This study aimed to assess the detrimental effects of PE-MPs on a soil-plant system and evaluate their mitigation using a novel microbial consortium (MC). We incorporated low-density polyethylene (LDPE) and high-density polyethylene (HDPE) at two different concentrations, along with a control (0 %, 1 %, and 2 % w/w) into the sandy loam soil for a duration of 135 days. The samples were also treated with a novel MC and incubated for 135 days. The MC comprised three bacterial strains (Ralstonia pickettii (MW290933) strain SHAn2, Pseudomonas putida strain ShA, and Lysinibacillus xylanilyticus XDB9 (T) strain S7–10F), and a fungal strain (Aspergillus niger strain F1–16S). Sunflowers were subsequently cultivated, and physiological growth parameters were measured. The results showed that adding 2 % LDPE significantly decreased soil pH by 1.06 units compared to the control. Moreover, adding 2 % HDPE resulted in a more significant decrease in soil electrical conductivity (EC) relative to LDPE and the control. A dose-dependent increase in dissolved organic carbon (DOC) was observed, with the highest DOC found in 2 % LDPE. The addition of higher dosages of LDPE reduced soil bulk density (BD) more than HDPE. The addition of 2 % HDPE increased the water drop penetration time (WDPT) but decreased the mean weight diameter of soil aggregates (MWD) and water-stable aggregates (WSA) compared to LDPE. The results also revealed that higher levels of LDPE enhanced soil basal respiration (BR) and microbial carbon biomass (MBC). The interaction of MC and higher MP percentages considerably reduced soil pH, EC, BD, and WDPT but significantly increased soil DOC, MWD, WSA, BR, and MBC. Regarding plant growth, incorporating 2 % PE-MPs significantly reduced physiological responses of sunflower: chlorophyll content (Chl; −15.2 %), Fv/Fm ratio (-25.3 %), shoot dry weight (ShD; −31.3 %), root dry weight (RD; −40 %), leaf area (LA; −38.4 %), and stem diameter (StemD; −25 %) compared to the control; however, the addition of novel MC considerably reduced and ameliorated the harmful effects of 2 % PE-MPs on the investigated plant growth responses.

Microplastic-Mediated Transfer of Tetracycline Resistance: Unveiling the Role of Mussels in Marine Ecosystems.

The global threat of antimicrobial resistance (AMR) is exacerbated by the mobilization of antimicrobial resistance genes (ARGs) occurring in different environmental niches, including seawater. Marine environments serve as reservoirs for resistant bacteria and ARGs, further complicated by the ubiquity of microplastics (MPs). MPs can adsorb pollutants and promote bacterial biofilm formation, creating conditions favorable to the dissemination of ARGs. This study explores the dynamics of ARG transfer in the marine bivalve Mytilus galloprovincialis within a seawater model, focusing on the influence of polyethylene MPs on the mobilization of the Tn916-carrying tetM gene and plasmid-encoded ermB. Experiments revealed that biofilm formation on MPs by Enterococcus faecium and Listeria monocytogenes facilitated the transfer of the tetM resistance gene, but not the ermB gene. Furthermore, the presence of MPs significantly increased the conjugation frequency of tetM within mussels, indicating that MPs enhance the potential for ARG mobilization in marine environments. These findings highlight the role of MPs and marine organisms in ARG spread, underscoring the ecological and public health implications.

The difference between tire wear particles and polyethylene microplastics in stormwater filtration systems: Perspectives from aging process, conventional pollutants removal and microbial communities

Tire wear particles (TWPs) in stormwater runoff have been widely detected and were generally classified into microplastics (MPs). TWPs and conventional MPs can be intercepted and accumulated in stormwater filtration systems, but their impacts on filtration, adsorption and microbial degradation processes of conventional pollutants (organic matters, nitrate and ammonium) have not been clarified. TWPs are different from MPs in surface feature, chemical components, adsorption ability and leaching of additives, which might lead to their different impacts on conventional pollutants removal. In this study, five different levels of aged polyethylene MPs (PEMPs) and aged TWPs contamination in stormwater filtration systems were simulated using thirty-three filtration columns. Results showed that ultraviolet aging treatment was less influential for the aging of TWPs than that of PEMPs, the specific surface area of aged PEMPs (1.603 m2/g) was over two times of unaged TWPs (0.728 m2/g) in the same size. Aged PEMPs and aged TWPs had different impacts on conventional pollutants removal performance and microbial communities, and the difference might be enlarged with exposure duration. The intensified aged PEMPs contamination generally promoted conventional pollutants removal, whereas aged TWPs showed an opposite trend. Mild contamination (0.01% and 0.1%, wt%) of aged PEMP/TWPs was beneficial to the richness and diversity of microbial communities, whereas higher contamination of aged PEMPs/TWPs was harmful. Aged PEMPs and TWPs had different impact on microbial community structure. Overall, the study found that TWPs were more detrimental than PEMPs in filtration systems. The research underscores the need for more comprehensive investigation into the occurrence, effects and management strategies of TWPs, as well as the importance of distinguishing between TWPs and MPs in future studies.

Effect of aging on the toxicity of polyethylene microplastics on the estuarine bivalve Scrobicularia plana

Microplastics (MP) are now present in all ecosystems and undergo weathering processes, including physical or chemical degradation. Although most studies have been carried out on MP toxicity in the marine ecosystem, interest is growing for the terrestrial and entire aquatic compartments. However, the interface between both environments, also known as the soil/water continuum, is given little consideration in MP toxicity studies. Only a few studies considered the toxicity of artificially aged or soil field-collected MP on species living at this interface. The present study evaluates the impact of artificial and field aging polyethylene (PE) MP on the bivalve Scrobicularia plana, a key organism of the estuarine compartment, living at the soil/water interface. Clams were exposed for 21 days to environmental concentrations (0.008, 10 and 100 μg L−1) of unaged as well as artificially and field aged PE MP. Toxicity was assessed from individual to molecular levels including condition index, clearance rate, burrowing behavior, energy reserves, enzyme activities and DNA damage. Results showed differential effects at all biological levels depending on the type and the concentration of the MP tested. Indeed, a decrease in burrowing behavior was observed in S. plana exposed to aged and field PE at low concentration (0.008 μg L−1). In the gills of clams, exposures to aged PE (0.008 and 100 μg L−1), virgin PE (10 μg L−1) and field PE (all tested concentrations) decreased CAT activity while DNA damage increased after exposure to virgin PE (0.008 μg L−1 and 10 μg L−1) and field PE (0.008 μg L−1). Our findings suggest that aging modifies the toxicity profile of PE polymer on S. plana and considering plastic from field at environmental concentrations is important when performing ecotoxicological studies.

Survival and transfer potential of Salmonella enterica serovar Typhimurium colonising polyethylene microplastics in contaminated agricultural soils

Agricultural environments are becoming increasingly contaminated with plastic pollution. Plastics in the environment can also provide a unique habitat for microbial biofilm, termed the ‘plastisphere’, which can also support the persistence of human pathogens such as Salmonella. Human enteric Salmonella enterica serovar Typhimurium can enter agricultural environments via flooding or from irrigation with contaminated water. Using soil mesocosms we quantified the ability of S. Typhimurium to persist on microplastic beads in two agriculturally relevant soils, under ambient and repeat flood scenarios. S. Typhimurium persisted in the plastisphere for 35 days in both podzol and loamy soils; while during multiple flood events was able to survive in the plastisphere for up to 21 days. S. Typhimurium could dissociate from the plastisphere during flooding events and migrate through soil in leachate, and importantly could colonise new plastic particles in the soil, suggesting that plastic pollution in agricultural soils can aid S. Typhimurium persistence and facilitate further dissemination within the environment. The potential for increased survival of enteric human pathogens in agricultural and food production environments due to plastic contamination poses a significant public health risk, particularly in potato or root vegetable systems where there is the potential for direct contact with crops.

High-density polyethylene microplastics in agricultural soil: Impact on microbes, enzymes, and carbon-nitrogen ratio.

Microplastics (MPs), recognized as emerging pollutants, pose a significant threat to diverse organisms and have adverse effects on agricultural soil. High-density polyethylene (HDPE) holds a prominent position among prevalent forms of MPs. In the current investigations, the impact of HDPE was assessed at four different concentrations (0.25%, 0.5%, 0.75%, and 1.0%) on agricultural soil, microbial population, exoenzymes activities including amylase, cellulase, and invertase, and alteration in carbon-to-nitrogen (C/N) ratio. Both bacterial and fungal populations exhibited a non-concentration-dependent response to different concentrations of HDPE over time. In this study, we refer to the concentrations of 0.25%, 0.5%, 0.75%, and 1.0% as HT1, HT2, HT3, and HT4, respectively. Initial MP application significantly reduced bacterial colony counts for HT1, HT2, and HT4, while HT3 showed no significant change. On the 60th day, HT1 and HT3 exhibited a higher bacterial colony count compared to the control. On the other hand, fungal populations increased to maximum on day 1 but displayed no distinct time-dependent trend from days 15 to 60. Furthermore, enzyme activities decreased with increasing concentrations of MPs over an extended period. Molecular docking studies suggest that HDPE can hinder enzyme activity by forming hydrogen bonds with enzymes. The C/N ratio was found to be significantly higher in MP-treated soils on the 60th day relative to control, suggesting relatively slower degradation of carbon compounds in the MP-treated soils.

Oxidation enhances the toxicity of polyethylene microplastics to mouse eye: Perspective from in vitro and in vivo

Microplastics (MPs) are ubiquitously dispersed in the environment, and undergoing the process of oxidation that alters their physical and chemical properties. Eyes, which directly interface with the external milieu, inevitably encounter MPs. Nonetheless, the ophthalmic toxicity of MPs towards organisms remains unclear. In this study, primary mouse corneal epithelial cells (MCECs), C57BL/6 mice, and CX3CrlGFP/+ mice were utilized to evaluate the toxicity and differences between oxidized low-density polyethylene MPs (modified-MPs) and low-density polyethylene MPs (virgin-MPs) on eyes. The results manifested that virgin-MPs and modified-MPs could be endocytosed by primary MCECs, resulting in a range of cellular damage. Furthermore, they could diminish tear secretion, increase intraocular pressure, and could be internalized into cornea and retina in mice, instigating a series of detrimental reactions. Importantly, modified-MPs exhibited heightened toxicity towards mouse eyes, seemingly due to oxidation enhances the interaction between virgin-MPs/modified-MPs and tissues/cells, and leading to the release of toxic substances increased. In conclusion, our discoveries demonstrate that oxidation exacerbates the harm of virgin-MPs to eyes, and are of great significance for evaluating the risk of MPs to ocular health.

Multi-Biomarkers' Responses in Gills of Oreochromis niloticus Exposed to Glyphosate and Polyethylene Microplastic, Isolated and in Mixture.

Microplastics (MPs) and glyphosate-based herbicides (GBH) are among the most common contaminants in aquatic environments. In Brazilian rivers, both contaminants were found in elevated levels, leading to a high probability of their association, which can alter their individual effects and potentially intensify their toxicity. This study evaluated the isolated and combined effects of polyethylene microplastics (PE-MPs) and GBH on Oreochromis niloticus using multi-biomarkers of toxicity. The fish were subjected to a 96-h exposure period, with concentrations set based either isolated, PE-MPs group (5 mg L-1), GBH group (5 mg L-1), or in a group of associated contaminants (GAC), PE-MP + GBH (5 mg L-1 + 5 mg L-1). Toxicity effects were evaluated using biochemical, cytogenetic, hematological, and histopathological biomarkers. We observed change in erythrocyte parameters leading to macrocytic normochromic anemia in GAC. Leukocyte parameters indicate a nonspecific immunosuppression caused by the exposure of associated contaminants, besides the attempts to repair damage caused by PE-MPs. Histopathological markers indicate damage to tissues exposed to contaminants. Besides, there were morphophysiological adjustments on gills, with proliferation and hypertrophy of mitochondria-rich cells on GBH and GAC, besides epithelium ruptures, which were mostly present in the exposed groups. Therefore, this study indicates that PE-MPs and GBHs present toxic effects in O. niloticus with the used concentrations, intensified by the association of contaminants. Thus, multi-biomarkers were useful key to verify toxicity, providing data to the investigation of high levels of contaminant's mixture toxicity present in aquatic environments.

Microplastics and metals: Microplastics generated from biodegradable polylactic acid mulch reduce bioaccumulation of cadmium in earthworms compared to those generated from polyethylene

Biodegradable polylactic acid (PLA) mulch has been developed to replace conventional polyethylene (PE) mulch in agriculture as a response to growing concerns about recalcitrant plastic pollution and the accumulation of microplastics (MPs) in soil. Cadmium is a significant soil pollutant in China. MPs have been shown to adsorb metals. In this study the earthworm Lumbricus terrestris was exposed to either Cd (1.0–100 mg / kg) or MPs (PE and PLA, 0.1–3 % w / w), or a combination of the two, for 28 days. Cd bioavailability significantly decreased in the presence of MPs. In particular, at the end of the experiment, PLA treatments had lower measured Cd concentrations in both earthworms (2.127–29.24 mg / kg) and pore water (below detection limits - 0.1384 mg /L) relative to PE treatments (2.720–33.77 mg / kg and below detection limits - 0.2489 mg / L). In our adsorption experiment PLA MPs adsorbed significantly more Cd than PE MPs with maximum adsorption capacities of 126.0 and 23.2 mg / kg respectively. These results suggest that the PLA MPs reduce earthworm exposure to Cd relative to PE by removing it from solution and reducing its bioavailability.

Urban wastewater disinfection by FeCl3-activated biochar/peroxymonosulfate system: Escherichia coli inactivation and microplastics interference

Biochar coupled with peroxymonosulfate (PMS) to produce sulfate radicals and its application to urban wastewater disinfection has been rarely investigated and no information is available about microplastics (MPs) interference on the disinfection process. In this study, FeCl3-activated biochar (Fe-BC) was coupled to PMS to evaluate the inactivation of Escherichia coli (E. coli) in real secondary treated urban wastewater. Surface morphology of Fe-BC sample, characterized by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS), showed a rough texture with uniform distribution of iron particles over the entire surface area. E. coli inactivation improved (∼3.8 log units, detection limit = 1 CFU/100 mL) as Fe-BC concentration was decreased (from 1.0 g/L to 0.5 g/L), at a constant PMS dose (300 mg/L). Besides, removal efficiency of E. coli was negatively affected by the presence of small (30–50 μm) polyethylene MPs (PE MPs) (200 mg/L), which could be attributed to the adsorption of MPs on Fe-BC surface, according to SEM images of post-treated Fe-BC. The low disinfection efficiency of Fe-BC/PMS system in presence MPs could be due to blocking of Fe-BC sites for PMS activation and/or radicals scavenging during treatment. These results allowed to unveil the mechanisms of MPs interference on E. coli inactivation by Fe-BC/PMS, as well as the potential of this process to make the effluent in compliance with the stringent limit for agricultural reuse.

MPs and PFOS single and combined exposure significantly alter genetic expressions of growth hormone and insulin growth factor-related biomarkers during zebrafish embryonic development

Microplastics (MPs) and perfluorooctane sulfonate (PFOS) are emerging pollutants that are ubiquitously present in the environment and can cause series of ecotoxicological effects on aquatic animals. This study examined how the expression of genes related to insulin growth factor (igf1, igf2a, igf2b, igfra, and igfrb) and growth hormone (ghrh, gh1, ghra, and ghrb) changes during the development of zebrafish embryos exposed to 8 μm polyethylene microplastics (PE-MPs) and perfluorooctane sulfonate (PFOS) individually and in combination for 72 h. Our findings revealed that both low-concentrations of MP (50 μg/L) and PFOS (0.02 μg/L) treatments could significantly activate gene expression within a short period. High concentrations of MPs (500 μg/L) and PFOS (0.1 μg/L) not only rapidly activated gene expression but also sustained high expression levels for a longer duration. During combined exposures, peak gene expression in the low concentration groups (50 μg/L MPs and 0.02 μg/L PFOS; 50 μg/L MPs and 0.1 μg/L PFOS) primarily occurred within 12 h after treatment. In the high concentration groups (500 μg/L MPs and 0.02 μg/L PFOS), peak expression was also observed within 12 h. Notably, the combined exposure groups exhibited more pronounced effects on gene expression than the individual exposure groups. The activation of gene expression was both more significant and longer-lasting in the combined exposure, indicating a synergistic regulatory effect of MPs and PFOS. Overall, our study suggests that zebrafish embryo development can be significantly impacted by exposure to MPs, PFOS, and their combination, with combined exposures having a more lasting and profound effect on gene regulation compared to single exposures.

Earthworms alleviate microplastics stress on soil microbial and protist communities

Microplastic (MP) pollution can exert significant pressure on soil ecosystems, however, the interactive effects of MPs on soil bacterial, fungal and protist communities remains poorly understood. Soil macrofauna, such as earthworms, can be directly affected by MPs, potentially leading to a range of feedbacks on the soil microbial community. To address this, we conducted a microcosm experiment to examine the effects of conventional (i.e., polyethylene, polystyrene) and biodegradable MPs (i.e. PBAT, polylactic acid) on the structure of the soil bacterial, fungal, and protist communities in the presence or absence of earthworms. We found that MP contamination negatively affected the diversity and composition of soil microbial and protist communities, with smaller-sized conventional MPs having the most pronounced effects. For example, compared with the unamended control, small-sized polyethylene MPs both significantly reduced the Shannon diversity of soil bacteria, fungi, and protist by 4.3 %, 37.0 %, and 9.1 %, respectively. Biodegradable MPs increased negative correlations among bacteria, fungi, and protists. However, earthworms mitigated these effects, enhancing the diversity and altering the composition of these communities. They also increased the niche width and stability of the soil microbial food web network. Our study indicated that earthworms help attenuate the response of soil microorganisms to MPs stress by influencing the diversity and composition of soil microorganisms and soil physicochemical properties and underscores the importance of considering macrofauna in MPs research.

Lower concentration polyethylene microplastics can influence free-floating macrophyte interactions by combined effects of many weak interactions: A nonnegligible ecological impact

Microplastics (MPs) are ubiquitous in freshwater ecosystems and their accumulation has been considered an emerging threat. Early research on the effects of MPs on macrophytes primarily focused on the toxicological impacts on individual macrophytes, with several studies suggesting that lower concentrations of MPs have little impact on macrophytes. However, the ecological implications of lower MP concentrations on macrophyte communities remain largely unexplored. Here, we experimented to assess the effects of lower concentrations including 25 mg/L, 50 mg/L, 75 mg/L, and 100 mg/L of polyethylene (PE) microplastics on Spirodela polyrhiza and Lemna minor, and their community. Our results also indicated that PE concentrations below 100 mg/L had no significant effect on relative growth rate, specific leaf area, Chlorophyll a, Chlorophyll b, Chlorophyll a + b, carotenoid, malondialdehyde (MDA), catalase, and soluble sugar of monocultural S. polyrhiza. However, a lower concentration of PE significantly decreased the MDA of monocultural L. minor and significantly affected the comprehensive index of S. polyrhiza. These findings suggested that lower concentrations of PE can influence interactions between macrophytes maybe due to the cumulative effects of many weak interactions. Additionally, our study showed that 75 mg/L and 100 mg/L PE additions decreased the competitive balance index value of two macrophytes under mixed-culture condition. This result implied that the ecological influence of lower concentration MPs on macrophytes may manifest at the community level rather than at the population level, due to species-specific responses and varying degrees of sensitivity of macrophytes to PE concentrations. Thus, our study emphasizes the need to closely monitor the ecological consequences of emerging contaminants such as MPs accumulation on macrophyte communities, rather than focusing solely on the morphology and physiology of individual macrophytes.

Microplastic co-exposure elevates cadmium accumulation in mouse tissue after rice consumption: Mechanisms and health implications

Rice cadmium (Cd) and microplastics are prevalent contaminants, posing a co-exposure threat to humans by means of dietary intake. To assess whether co-exposure of microplastics affects the bioavailability of rice Cd, mice were exposed to Cd-contaminated rice with microplastic co-exposure. We found that polyethylene (PE), polystyrene (PS), polypropylene (PP), and polyamide (PA) microplastic co-exposure via diet consumption (2 μg g–1) caused 1.17–1.38-fold higher Cd accumulation in tissue of mice fed by Cd-rice. For mice with co-exposure of PE microplastics, the higher rice-Cd bioavailability corresponded to colonization of Lactobacillus reuteri (38.9 % vs 17.5 %) in the gut compared to control mice, which caused higher production of gut metabolites particularly peptides, likely causing a ‘side effect’ of elevating Cd solubility in the intestinal lumen. In addition, abundance of sphingosine 1-phosphate in the gut of mice was reduced under PE microplastic exposure, which may reduce intracellular calcium ions (Ca2+) in enterocytes and form a weaker competition in pumping of intracellular Ca2+ and Cd2+ across the basolateral membrane of enterocytes, leading to higher Cd2+ transport efficiency. The results suggest elevated Cd exposure risk from rice consumption with microplastic co-exposure at environmentally relevant low concentrations.

Microbiomes on microplastics versus natural microcarriers: Stability and transformation during aquatic travel from aquaculture ponds to adjacent stream

Microplastics (MPs) with different physical-chemical properties are considered as vectors for the propagation of microbes in aquatic environments. It remains unclear how plastic types impact on the plastisphere and whether different MPs spread microbes more rapidly than natural materials in microbes across distinct water bodies as proposed previously. We used in-situ incubation to investigate the microbes attached on MPs of polyethylene (PE), polypropylene (PP), and polyvinyl chloride (PVC), versus that on two natural microcarriers (quartz sands and bamboo) during the travel from aquaculture ponds with impacted by fish farming to adjacent freshwater stream. The results showed that the microbial communities on the carriers were shaped not only by environmental conditions, which were primary determinants but also by carrier types. All the tested plastics did not carry more microbes than the natural carriers during the journey. The biofilm community composition on PVC is distinct from that on PE and PP MPs and natural carriers. The plastisphere of PE and PP kept microbial proportions as natural materials did but PVC retained less than nature materials. Bamboo carried more potential pathogens than plastic polymers and quartz. The results indicated that the communities of plastisphere is polymer-type dependent, and, compared with the natural materials, MPs did not show enhanced propagation of microbes, including pathogens, cross distinct environments.

3D imaging photocatalytically degraded micro- and nanoplastics

Microplastics (MPs) and nanoplastics have been an emerging global concern, with hazardous effects on plant, animal, and human health. Their small size makes it easier for them to spread to various ecosystems and enter the food chain; they are already widely found in aqueous environments and within aquatic life, and have even been found within humans. Much research has gone into understanding micro-/nanoplastic sources and environmental fate, but less work has been done to understand their degradation. Photocatalytic degradation is a promising green technique that uses visible or ultraviolet light in combination with photocatalyst to degrade plastic particles. While complete degradation, reducing plastics to small molecules, is often the goal, partial degradation is more common. We examined microscale polyethylene (PE) (125–150 µm in diameter) and nanoscale polystyrene (PS) (∼300 nm in diameter) spheres both before and after degradation using multiple imaging techniques, especially electron tomography in addition to conventional electron microscopy. Electron tomography is able to image the 3D exterior and interior of the nanoplastics, enabling us to observe within aggregates and inside degraded spheres, where we found potentially open interior structures after degradation. These structures may result from differences in degradation and aggregation behavior between the different plastic types, with our work finding that PE MPs typically cracked into sharp fragments, while PS nanoplastics often fragmented into smoother, more curved shapes. These and other differences, along with interior and 3D surface images, provide new details on how the structure and aggregation of PE MPs and PS nanoplastics changes when degraded, which could influence how the resulting worn particles are collected or treated further.

Aging properties of polyethylene and polylactic acid microplastics and their adsorption behavior of Cd(II) and Cr(VI) in aquatic environments

In this study, we examined the aging characteristics of polyethylene (PE) and polylactic acid (PLA) microplastics (MPs), examining the adsorption behaviors and mechanisms concerning Cd(II) and Cr(VI) under both single and binary systems. The results revealed that aging treatment changed the physicochemical properties of MPs. The aging mechanisms of PLA and PE MPs were shown to be similar by the 2D-FTIR-COS study. These mechanisms involve the formation of oxygen-containing functional groups through the combination of carbon chain breakdown and oxygen. Aged MPs had a greater ability to adsorb metal ions than pristine MPs, with PLA MPs outperforming PE MPs. After 30 days of aging, Cd(II) adsorption increased by 40.61 % and 25.49 % for PE and PLA MPs, respectively, while Cr(VI) adsorption increased by 37.50 % and 69.29 %, respectively. The adsorption ability of PE and PLA MPs with Cd(II) or Cr(VI) under binary systems was less than that under single systems, with Cd(II) exhibiting more adsorption competitiveness than Cr(VI). Humic acid (HA), ionic species and strength, solution pH, and adsorption of Cd(II) and Cr(VI) were found to be significantly correlated. Further investigation into the adsorption mechanisms of Cd(II) and Cr(VI) on PE and PLA MPs revealed that pore-filling, electrostatic interactions, complexation, and hydrogen bonding play important roles in the adsorption process. The study's conclusions are crucial for assessing the risk associated with concurrent contamination by metal ions and microplastics.

Reproduction, growth and oxidative stress in earthworm Eisenia andrei exposed to conventional and biodegradable mulching film microplastics

Plastic contamination in agricultural soils has become increasingly evident. Plastic mulching films are widely used in agricultural practices. However, the increased use of biodegradable plastics has, to some extent, replaced their non-degradable counterparts. The fragmentation of plastics generates microplastics (MPs), posing risk to soil functions and organisms. In this study the effects of low-density polyethylene microplastics (PE-MP) and polybutylene adipate terephthalate biodegradable microplastics (PBAT-BD-MP) originating from mulching films on the earthworm Eisenia andrei were studied. The earthworms were exposed to seven concentrations (0, 0.005, 0.05, 0.1, 0.5, 1, and 5 % w/w) based on environmentally relevant levels and worst-case scenarios on soil contamination. Survival, growth, reproduction, and biomarkers for oxidative stress [superoxide dismutase (SOD), catalase (CAT), glutathione reductase (GR), glutathione S-transferase (GST), glutathione (GSH), and lipid peroxidation (LPO)] were analysed. Additionally, the Integrated Biomarker Response Index (IBR) was calculated to assess the overall oxidative stress status of the earthworms. Results showed that PE-MP exposure slightly decreased the biomass of the earthworms towards higher concentrations, whereas PBAT-BD-MPs induced growth at lower concentrations. MPs did not have a significant effect on Eisenia andrei reproduction; however, a slight negative trend was observed in juvenile production with increasing PE-MP concentrations. Both PE-MP and PBAT-BD-MP affected antioxidant system, PE-MPs with changes in CAT and GR levels and PBAT-BD-MPs inducing effects on SOD and LPO levels. Additionally, both MPs exhibited effects on soil parameters, resulting in increased soil pH and water-holding capacity at 5 % concentration. Changes in soil parameters can further affect soil organisms such as earthworms. This study provides understanding of the ecotoxicological effects of conventional and biodegradable microplastics on the earthworm Eisenia andrei. It also shows that MP particles of both conventional and biodegradable mulching films induce oxidative stress, considered as an early-warning indicator for adverse ecological effects, in environmentally relevant concentrations.

The effective and green biodegradation of polyethylene microplastics by the screening of a strain with its degrading enzymes

The polyethylene microplastics (MPs) degrading fungi named the strain DL-1 were isolated and screened to reduce the pollution of polyethylene MPs. The strain was preliminarily identified as Aspergillus niger by the sequence homology comparison and phylogenetic tree construction. The biodegradation rate of polyethylene MPs by the strain DL-1 was 7.65 ± 0.92 % after 30 days. The grooves and wrinkles appeared on the surface of MPs after the degradation. During the effective degradation process, the strain DL-1 produced the enzymes (plastic degrading enzymes) to biodegrade the polyethylene MPs. It was showed that the plastic degrading enzymes increased under the induction of polyethylene MPs in the medium, indicating that the enzymes played the important role in biodegradation of polyethylene MPs. Moreover, the ability of strain to biodegrade polyethylene MPs and the mechanism of biodegradation were investigated with varied measurements and characteristics. It enriched the way of microbial degradation of polyethylene MPs and provided the environmentally-friendly biodegradation with the green treatment for MPs.