Polycaprolactone Nanoparticles Research Articles

Multifunctional epoxy/carbon composites with a fully reparable interface

AbstractIn this work, for the first time, carbon fibers (CFs) were coated with nanosized‐polycaprolactone (PCL) particles to obtain a functionalized self‐healable interphase, capable to fully recover the pristine interfacial shear strength with a debonded epoxy matrix. PCL nanoparticles were initially water‐dispersed at different concentrations and deposited on CFs by electrophoretic deposition. The application of various voltage levels resulted in different morphologies of the coating. Epoxy microdroplets were deposited and cured on neat and PCL‐coated fibers. After complete interfacial debonding by microdebonding tests, an electric current was applied on CFs to activate a thermal interfacial healing by Joule effect. The healing efficiency was estimated as the ratio of interfacial shear strength measured before and after healing. An outstanding repairing efficiency was obtained upon thermal mending with a complete recovery of the original interfacial shear strength, thus indicating a strong potential of the PCL nanocoating as interfacial healing agent for composite structures.Highlights CFs were coated with nanosized‐PCL particles to obtain a functionalized self‐healable interphase. Electrophoretic deposition was employed for the fiber coating. Microdebonding tests were performed to assess the fiber/matrix interfacial properties in terms of interfacial shear strength. A full recovery of the interfacial properties was obtained via thermal interfacial healing by Joule effect.

Biodegradation of Poly(ethylene terephthalate) by Bacillus safensis YX8.

Due to the extensive utilization of poly (ethylene terephthalate) (PET), a significant amount of PET waste has been discharged into the environment, endangering both human health and the ecology. As an eco-friendly approach to PET waste treatment, biodegradation is dependent on efficient strains and enzymes. In this study, a screening method was first established using polycaprolactone (PCL) and PET nanoparticles as substrates. A PET-degrading strain YX8 was isolated from the surface of PET waste. Based on the phylogenetic analysis of 16S rRNA and gyrA genes, this strain was identified as Bacillus safensis. Strain YX8 demonstrated the capability to degrade PET nanoparticles, resulting in the production of terephthalic acid (TPA), mono (2-hydroxyethyl) terephthalic acid (MHET), and bis (2-hydroxyethyl) terephthalic acid (BHET). Erosion spots on the PET film were observed after incubation with strain YX8. Furthermore, the extracellular enzymes produced by strain YX8 exhibited the ability to form a clear zone on the PCL plate and to hydrolyze PET nanoparticles to generate TPA, MHET, and BHET. This work developed a method for the isolation of PET-degrading microorganisms and provides new strain resources for PET degradation and for the mining of functional enzymes.

Curcumin and resveratrol delivery from multi-functionalized calcium phosphate scaffold enhances biological properties

Natural medicinal compounds (NMCs) can assist effectively in treating bone disorders. NMC release kinetics from a ceramic bone tissue engineering scaffold can be tailored. However, inferior physicochemical properties halt their therapeutic applications and need a carrier system for delivery. We developed a multi-functionalized scaffold to understand the effect of curcumin (Cur) and resveratrol (Rsv) on in vitro biological properties. Polycaprolactone (PCL) nanoparticles encapsulated resveratrol in the polymeric matrix. Nanoparticles showed a hydrodynamic diameter of about 180 nm, −16 mV zeta potential, and up to ∼65 % encapsulation efficiency. Scaffolds made of zinc-doped tricalcium phosphate (Zn-TCP) were coated with curcumin followed by either resveratrol (Cur-Rsv) or resveratrol nanoparticles (Cur-Rsv-NP). NMC-loaded scaffolds exhibited a biphasic release pattern over 60 days. Solubility and hydrophobic-hydrophilic interactions affected the NMC release profile. Resveratrol showed rapid release as compared to curcumin. The treated scaffold increased the cell viability of human fetal osteoblast (hFOB) by 1.8-fold as compared to the control. It exhibited a 6-fold increase in cytotoxicity toward osteosarcoma (MG-63) cells as compared to the untreated scaffold. NMCs loaded scaffold effectively inhibited Staphylococcus aureus from colonizing over the scaffold. Zinc doping enhanced osteoblast growth and prevented bacterial colony formation. Such design principle provided a direction for developing multi-functionalized calcium phosphate (CaP) scaffolds against bone diseases for orthopedic applications.

Microfluidic-Assisted Formulation of ε-Polycaprolactone Nanoparticles and Evaluation of Their Properties and In Vitro Cell Uptake.

The nanoprecipitation method was used to formulate ε-polycaprolactone (PCL) into fluorescent nanoparticles. Two methods of mixing the phases were evaluated: introducing the organic phase into the aqueous phase dropwise and via a specially designed microfluidic device. As a result of the nanoprecipitation process, fluorescein-loaded nanoparticles (NPs) with a mean diameter of 127 ± 3 nm and polydispersity index (PDI) of 0.180 ± 0.009 were obtained. The profiles of dye release were determined in vitro using dialysis membrane tubing, and the results showed a controlled release of the dye from NPs. In addition, the cytotoxicity of the NPs was assessed using an MTT assay. The PCL NPs were shown to be safe and non-toxic to L929 and MG63 cells. The results of the present study have revealed that PCL NPs represent a promising system for developing new drug delivery systems.

Development of Statistically Optimized Piperine-Loaded Polymeric Nanoparticles for Breast Cancer: In Vitro Evaluation and Cell Culture Studies.

Piperine (PPN) is a natural alkaloid derived from black pepper (Piper nigrum L.) and has garnered substantial attention for its potential in breast cancer therapy due to its diverse pharmacological properties. However, its highly lipophilic characteristics and poor dissolution in biological fluids limit its clinical application. Therefore, to overcome this limitation, we formulate and evaluate PPN-encapsulated polycaprolactone (PCL) nanoparticles (PPN-PCL-NPs). The nanoparticles were prepared by a single-step nanoprecipitation method and further optimized by a formulation design approach. The influence of selected independent variables PCL (X1), poloxamer 188 (P-188; X2), and stirring speed (SS; X3) were investigated on the particle size (PS), polydispersity index (PDI), and % encapsulation efficiency (EE). The selected optimized nanoparticles were further assessed for stability, in vitro release, and in vitro antibreast cancer activity in the MCF-7 cancer cell line. The PS, PDI, zeta potential, and % EE of the optimized PPN-PCL-NPs were observed to be 107.61 ± 5.28 nm, 0.136 ± 0.011, -20.42 ± 1.82 mV, and 79.53 ± 5.22%, respectively. The developed PPN-PCL-NPs were stable under different temperature conditions with insignificant changes in their pharmaceutical attributes. The optimized PPN-PCL-NPs showed a burst release for the first 6 h and later showed sustained release for 48 h. The PPN-PCL-NPs exhibit exceptional cytotoxic effects in MCF-7 breast tumor cells in comparison with the native PPN. Thus, the formulation of PPN-loaded PCL-NPs can be a promising approach for better therapeutic efficacy against breast cancer.

Piperine Extraction and Encapsulation in Polycaprolactone Nanoparticles

Black pepper, a commonly utilized culinary condiment, holds significant importance in Ayurvedic and Chinese medicinal practices due to its various biological benefits, including antioxidant, antimicrobial, and anti-inflammatory properties. To amplify these attributes and enhance their efficacy in formulations, the utilization of nanocarriers presents a promising approach. Thus, the objective of this study was to obtain a pepper extract, evaluate its constituents, and encapsulate it in polymeric nanoparticles. The ethanol extract of the grains powder had a higher concentration of piperine and better antioxidant activity when compared to whole grains. Pepper extract encapsulation efficiency in terms of piperine concentration was 84.8 ± 3.5%, and a sustained and prolonged release profile was observed, as well as other studies in the literature using polycaprolactone (PCL). The presence of the extract did not change the instability index and the sedimentation velocity of the nanoparticles, as well as the polydispersity index and the zeta potential of nanoparticles. However, there was a difference in the mean size and concentration of particles. This study highlights the potential of PCL nanoparticles as a promising delivery system for black pepper extract, which could have various applications in the cosmetic and pharmaceutical industries, maximizing the benefits of black pepper extract.

Tuning the Emulsion Properties Influences the Size of Poly(Caprolactone) Particles for Drug Delivery Applications.

Advances in drug delivery have been accelerated with the addition of polymeric drug carriers. Direct delivery to a target site is a promising step in developing effective drug and gene therapies to treat disease. The efficacy of these drug carriers heavily relies on cell uptake without compromising critical cellular processes that promote cell viability. Drug release from biodegradable polymers is mediated largely by polymer degradation, and therefore the rate of polymer degradation dictates the feasibility of drug delivery applications. Traditionally, poly(caprolactone) (PCL) has only been used in long-term biomedical applications because the degradation time is much slower than other polymers. However, the biocompatibility of this polymer and the potential for longer delivery windows renders it a promising polymer candidate for drug delivery. In this work, we outline sixteen emulsion solvent evaporation preparation methods for PCL nanoparticles and microparticles to develop particles between 300nm and 1.7μm and with zeta potentials of -1.8mV. We further investigated particles in a size range suitable for systemic tumor delivery and inhaled aerosol delivery to determine cell biocompatibility with the polymer in lung adenocarcinoma, endometrial adenocarcinoma, and human embryonic kidney cells. We determined these particles aren't detrimental to cell viability below particle monolayer coverage atop cells and therefore these formulations hold promise for the next stage of development as sustained-release drug delivery carriers.

New Advances in Nano-Enabled Weed Management Using Poly(Epsilon-Caprolactone)-Based Nanoherbicides: A Review

The number of effective herbicides available to farmers is steadily decreasing due to increasing herbicide resistance. It seems very important to address and effectively deal with the main weed management challenges (low crop yield and environmental pollution) by investigating the potential of newly introduced materials, such as biocompatible polymer-based nanoparticles. The current review aims to encourage agricultural or environmental researchers to conduct new research on the synthesis and application of modified herbicides, such as nanoherbicides, for application in weed management and to provide a comprehensive foundation on the topic. Such nanosystems could help with the promotion of the controlled release of active ingredients and extend their action time, resulting in a reduction in dose and application number; improve the physical and chemical characteristics of the herbicide to increase foliar adhesion; prevent degradation that results from environmental factors (such as sunlight, temperature, microorganisms, or pH); and decrease herbicide leaching and contamination of the environment. Furthermore, it has been indicated that some polymeric nanocarriers can penetrate biological barriers, including membranes and plant cell walls, and translocate across vascular tissues, resulting in a more efficient delivery of active ingredients. Poly(epsilon-caprolactone) is a biocompatible material that is easily decomposable by enzymes and fungi. PCL nanoparticles could be applied as nanocarriers of herbicides in agriculture due to their low toxicity, their potential for large-scale synthesis from inexpensive materials, their ability to dissolve herbicides, their high loading capacity, and their ability to help minimize the chemical decomposition of herbicides.

Optimization of Bromocriptine-Mesylate-Loaded Polycaprolactone Nanoparticles Coated with Chitosan for Nose-to-Brain Delivery: In Vitro and In Vivo Studies.

Bromocriptine mesylate (BM), primarily ergocryptine, is a dopamine agonist derived from ergot alkaloids. This study aimed to formulate chitosan (CS)-coated poly ε-caprolactone nanoparticles (PCL NPs) loaded with BM for direct targeting to the brain via the nasal route. PCL NPs were optimized using response surface methodology and a Box-Behnken factorial design. Independent formulation parameters for nanoparticle attributes, including PCL payload (A), D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) concentration (B), and sonication time (C), were investigated. The dependent variables were nanoparticle size (Y1), zeta potential (Y2), entrapment efficiency (EE; Y3), and drug release rate (Y4). The optimal formulation for BM-PCL NPs was determined to be 50 mg PCL load, 0.0865% TPGS concentration, and 8 min sonication time, resulting in nanoparticles with a size of 296 ± 2.9 nm having a zeta potential of -16.2 ± 3.8 mV, an EE of 90.7 ± 1.9%, and a zero-order release rate of 2.6 ± 1.3%/min. The optimized BM-PCL NPs were then coated with CS at varying concentrations (0.25, 0.5, and 1%) to enhance their effect. The CS-PCL NPs exhibited different particle sizes and zeta potentials depending on the CS concentration used. The highest EE (88%) and drug load (DL; 5.5%) were observed for the optimized BM-CS-PCL NPs coated with 0.25% CS. The BM-CS-PCL NPs displayed a biphasic release pattern, with an initial rapid drug release lasting for 2 h, followed by a sustained release for up to 48 h. The 0.25% CS-coated BM-CS-PCL NPs showed a high level of permeation across the goat nasal mucosa, with reasonable mucoadhesive strength. These findings suggested that the optimized 0.25% CS-coated BM-CS-PCL NPs hold promise for successful nasal delivery, thereby improving the therapeutic efficacy of BM.

Biocompatibility Assessment of Polycaprolactone/Polylactic Acid/Zinc Oxide Nanoparticle Composites under In Vivo Conditions for Biomedical Applications.

The increasing demand for non-invasive biocompatible materials in biomedical applications, driven by accidents and diseases like cancer, has led to the development of sustainable biomaterials. Here, we report the synthesis of four block formulations using polycaprolactone (PCL), polylactic acid (PLA), and zinc oxide nanoparticles (ZnO-NPs) for subdermal tissue regeneration. Characterization by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) confirmed the composition of the composites. Additionally, the interaction of ZnO-NPs mainly occurred with the C=O groups of PCL occurring at 1724 cm-1, which disappears for F4, as evidenced in the FT-IR analysis. Likewise, this interaction evidenced the decrease in the crystallinity of the composites as they act as crosslinking points between the polymer backbones, inducing gaps between them and weakening the strength of the intermolecular bonds. Thermogravimetric (TGA) and differential scanning calorimetry (DSC) analyses confirmed that the ZnO-NPs bind to the carbonyl groups of the polymer, acting as weak points in the polymer backbone from where the different fragmentations occur. Scanning electron microscopy (SEM) showed that the increase in ZnO-NPs facilitated a more compact surface due to the excellent dispersion and homogeneous accumulation between the polymeric chains, facilitating this morphology. The in vivo studies using the nanocomposites demonstrated the degradation/resorption of the blocks in a ZnO-NP-dependant mode. After degradation, collagen fibers (Type I), blood vessels, and inflammatory cells continue the resorption of the implanted material. The results reported here demonstrate the relevance and potential impact of the ZnO-NP-based scaffolds in soft tissue regeneration.

Asymmetrical interactions between nanoparticles and proteins arising from deformation upon adsorption to surfaces

Drug release from polymeric nanoparticles (NPs) is governed by their adsorption onto cell membranes and transmigration across cell walls. These steps are influenced by their interactions with proteins near the cells. These interactions were investigated by studying the sequential adsorption of plasma proteins, albumin (Alb) and fibrinogen (Fg), and micellar NPs using quartz crystal microbalance with dissipation (QCMD), X-ray photoelectron spectroscopy (XPS), and small-angle X-ray scattering (SAXS). The three NPs in the study all have poly(ethylene glycol) (PEG) shells but different cores: amorphous poly(propylene oxide) (PPO), crystalline polycaprolactone (PCL), and poly(desaminotyrosyl-tyrosine octyl ester-co-suberic acid) (DTO-SA). None of the NPs adsorbed onto a pre-adsorbed Fg layer. On the other hand, when the deposition sequence was reversed, Fg was adsorbed onto DTO-SA NP and PCL NP surfaces, but not onto the PPO NP surface. The interactions with Alb were different: DTO-SA did not adsorb onto Alb and vice versa; PPO NP adsorbed onto an Alb layer, but Alb did not adsorb onto the PPO NP layer; and PCL NP reversibly adsorbed onto Alb, but Alb displaced pre-adsorbed PCL NP. Thus, in most instances, the adsorption behavior was asymmetric in that it was dependent on the order of arrival of the adsorbates at the substrate. SAXS data did not show evidence for complex formation in solution. Thus, the solution behavior appears not to be a predictor of the interaction of proteins and the NPs near surfaces. Differing strengths of pairwise interactions of proteins, NPs and substrates account for this adsorption behavior. These differences in interactions could be the results of deformation of the adsorbates immobilized at the surface and the different degrees of surface remodeling that occur upon adsorption. Deformation could lead to disassembly of the NPs that has implications on their ability to release their payload of drugs upon adsorption onto tissue surfaces.

Abstract P3007: Rosuvastatin-eluting Gold-nanoparticle-loaded Perivascular Wrap For Enhanced Arteriovenous Fistula Maturation In A Murine Model

Background: Arteriovenous fistulas (AVFs) are a vital form of arteriovenous access for patients requiring hemodialysis, but they are linked to overall morbidity and mortality when they fail to mature. The most common cause of AVF non-maturation is neointimal hyperplasia (NIH). To minimize the effects of NIH, a perivascular wrap composed of polycaprolactone (PCL), rosuvastatin (ROSU), and gold nanoparticles (AuNPs) was created. Objectives: This study assessed the impact of ROSU-eluting, radiopaque resorbable perivascular wraps on pathologic NIH in a chronic kidney disease (CKD) rodent model of AVF. Methods: Electrospun PCL wraps containing AuNPs and/or ROSU were monitored for in vitro AuNP release, ROSU elution, and cell viability. The wraps were implanted around an AVF in a CKD rodent model for in vivo ultrasound (US) and micro-computed tomography (mCT) imaging. AVF specimens were collected for histological analyses. Results: Cell viability was preserved in the presence of both AuNP- and ROSU-containing wraps. In vitro release of ROSU and AuNPs correlated with in vivo findings of decreasing radiopacity on mCT over time. AuNP-loaded wraps had increased radiopacity compared with PCL-alone wraps and control AVFs without wraps. The addition of ROSU decreased US and histologic measurements of NIH. Conclusions: The reduced NIH seen with ROSU-loaded perivascular wraps suggests a synergistic effect between mechanical support and anti-hyperplasia medication. Furthermore, AuNP loading increased wrap radiopacity. Together, our results show that AuNP- and ROSU-loaded PCL wraps induce AVF maturation and suppress NIH while facilitating optimal implanted device visualization.

Evaluation of in vitro immunostimulatory and cytotoxic effects of recombinant survivin protein in combination with doxorubicin and breast cancer antigen-loaded polycaprolactone nanoparticles

In this study, the immunostimulatory and anticancer activities of the doxorubicin (DOX), MCF-7 and MDA-MB-231 breast cancer antigen-loaded polycaprolactone (PCL) nanoparticles (NPs) in combination with survivin recombinant protein (RP) and an alum adjuvant are evaluated in vitro on J774 macrophage, MCF-7 and MDA-MB-231 breast cancer cell lines. A double-emulsion solvent evaporation method was used for encapsulation of DOX and antigens into PCL NPs. The physicochemical characterization of NPs included size, morphology, zeta potential, release profiles and encapsulation efficiencies, analyzed using scanning electron microscopy, a zeta-sizer and UV–vis spectrometry. The cytotoxic and inhibitory effects of NPs were determined using a methyl thiazolyl tetrazolium assay. Immunostimulatory effects of the NPs were detected by Griess reaction and ELISA tests to determine nitric oxide and cytokine levels, respectively. According to the results, DOX and antigen-loaded PCL NPs ranged between 240 nm and 290 nm. Antigen and drug-loaded NPs appear less toxic over macrophage cells in comparison with non-capsulated free agents. In addition, considerable inhibitory effects of antigen and drug-loaded NPs were observed at non-toxic concentrations, such as 25 and 50 μg ml−1, on human mammary cancer cell lines (p⩽ 0.0001). The amount of nitrite released from macrophages that were treated with antigen and DOX-encapsulated PCL NPs, in combination with alum and survivin RP, after 96 h incubation was significantly higher than the control, especially at 50 and 100 μg ml−1, and triggered macrophages to produce high quantities of IL-4 and IL-12 cytokines in contrast to the control. As a result, DOX and antigen-loaded PCL NPs in combination with survivin and alum adjuvant revealed significant immunostimulatory and inhibiting influence on macrophage and breast cancer cells, respectively. The outcomes revealed that antigen and drug-loaded PCL NPs supplemented with survivin RP and an alum adjuvant created an effective platform for the development of nanotechnology-based immunotherapeutic tools to inhibit breast cancer cells. However, these outputs should be supported by further in vivo studies.

Gamma radiation effect on the chemical, mechanical and thermal properties of PCL/MCM-48-PVA nanocomposite films

In this work, poly (vinyl alcohol) (PVA) was employed to produce a Mesoporous Composition of Matter-48 Modified (MCM-48-M or MCM-48-PVA). After surface modification, MCM-48-M was used to produce nanocomposite (NC) films with polycaprolactone (PCL) as a matrix at room temperature. PCL and MCM-48 nanoparticles (NPs) were chosen due to their great biocompatibility and low toxicity. However, MCM-48-M is more compatible with PCL than MCM-48. NC films were sterilized by gamma radiation with a dose of 25 kGy and characterized by experimental techniques to investigate their chemical, mechanical (tensile) and thermal properties. Scanning electron microscopy (SEM) and transmission electronic microscopy (TEM) results indicated that MCM-48-M exhibited a random distribution in the PCL matrix. The PCL chemical structure was preserved in NC films as described by Fourier transform infrared (FT-IR) spectroscopy as well as the tensile and thermal properties of NC films. FT-IR and thermogravimetric analysis (TGA) results showed surface modification. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) showed that crystalline symmetries were preserved and the crystallinity of NC films had small variations in all samples before and after irradiation, respectively. But, our results did not indicate major changes showing that this method is successful for the sterilization of PCL/MCM-48-PVA NC films.

Encapsulated polycaprolactone with triazole derivatives and selenium nanoparticles as promising antiproliferative and anticancer agents.

Polycaprolactone nanocapsules incorporated with triazole derivatives in the presence and absence of selenium nanoparticles were prepared and evaluated as antiproliferative and anticancer agents. Polycaprolactone nanoparticles were prepared using the emulsion technique. The prepared capsules were characterized using FT-IR, TEM and DLS measurements. The synthesized triazolopyrimidine derivative in the presence and absence of selenium nanoparticles encapsulated in polycaprolactone was tested for its in vitro antiproliferative efficiency towards human breast cancer cell line (MCF7) and murine fibroblast normal cell line (BALB/3T3) in comparison to doxorubicin as a standard anticancer drug. The results indicated that encapsulated polycaprolactone with selenium nanoparticles (SeNPs) and triazole-SeNPs were the most potent samples against the tested breast cancer cell line (MCF7). On the other hand, all compounds showed weak or moderate activities towards the tested murine fibroblast normal cell line (BALB/3T3). As the safety index (SI) was higher than 1.0, it expanded the way for newly synthesized compounds to express antiproliferative efficacy against tumour cells. Hence, these compounds may be considered promising ones. However, they should be examined through further in-vivo and pharmacokinetic studies.

Exploring anticancer properties of novel Nano-Formulation of BODIPY Compound, Photophysicochemical, in vitro and in silico evaluations

A new BODIPY complex (C4) composed of meso- thienyl-pyridine substituted core unit diiodinated from 2- and 6- positions and distyryl moieties at 3- and 5- positions is synthesized. Nano-sized formulation of C4 is prepared by single emulsion method using poly(ε-caprolactone)(PCL) polymer. Encapsulation efficiency and loading capacity values of C4 loaded PCL nanoparticles (C4@PCL-NPs) are calculated and in vitro release profile of C4 is determined. The cytotoxicity and anti-cancer activity are conducted on the L929 and MCF-7 cell lines. Cellular uptake study is performed and interaction between C4@PCL-NPs and MCF-7 cell line is investigated. Anti-cancer activity of C4 is predicted with molecular docking studies and the inhibition property on EGFR, ERα, PR and mTOR are investigated for its anticancer properties. Molecular interactions, binding positions and docking score energies between C4 and EGFR, ERα, PR and mTOR targets are revealed using in silico methods. The druglikeness and pharmacokinetic properties of C4 are evaluated using the SwissADME and its bioavailability and toxicity profiles are assessed using the SwissADME, preADMET and pkCSM servers. In conclusion, the potential use of C4 as an anti-cancer agent is evaluated in vitro and in silico methods. Also, photophysicochemical properties are studied to investigate the potential of using Photodynamic Therapy (PDT). In photochemical studies, the calculated singlet oxygen quantum yield (ΦΔ) value was 0.73 for C4 and in photopysical studies, the calculated fluorescence quantum yield ΦF value was 0.19 for C4.

TGF-β blocking combined with photothermal therapy promote tumor targeted migration and long-term antitumor activity of CAR-T cells.

TGF-β is widely existed in tumor microenvironment, taking part in tumorigenesis process including angiogenesis, cancer associated fibroblast (CAF) proliferation, and immunosuppression. It inhibited the activation, proliferation, migration and differentiation of T cells, in which way caused a limited therapeutic effects of chimeric antigen receptor T (CAR-T) towards solid tumor such as lymphoma. To targeted block TGF-β at tumor site, we take advantages of nano-techniques to deliver TGF-β inhibitors LY2157299 (LY) towards the tumor sites, in order to help achieve a improved and long-term functions of CAR-T towards lymphoma. Based on amphipathic hydroxyethyl starch-polycaprolactone (HES-PCL), LY and photosensitizer indocyanine green (ICG) were co-loaded in HES-PCL to achieve LY/ICG@HES-PCL nanoparticle. The enhanced function of CAR-T benefited from LY/ICG@HES-PCL were verified through lymphoma Raji cells in vitro and Nod scid gamma mice engrafted with the Raji cells in vivo. LY was targeted transported to tumor site and accelerated release by mild ICG photothermal. Chemokines CXCL9/10/11​at the tumor site relevant to CAR-T migration and chemokines receptor CXCR3 of CAR-T could be up-regulated by LY, thus facilitated the enhanced accumulation of CAR-T at lymphoma site. T effector memory cells differentiation could also be accelerated by LY/ICG@HES-PCL. Combined therapy of LY/ICG@HES-PCL and CAR-T achieved 2.4 times higher antitumor activity and 2.7 times higher relapse inhibiting rates than CAR-T alone within 15 days and 11 days, respectively. The results suggested that LY/ICG@HES-PCL facilitated the enhanced therapeutic index of CAR-T cells towards lymphoma simply and safely, it may be further potentiated applied for other solid tumors.

Resveratrol-Loaded Polymeric Nanoparticles: The Effects of D-α-Tocopheryl Polyethylene Glycol 1000 Succinate (TPGS) on Physicochemical and Biological Properties against Breast Cancer In Vitro and In Vivo.

Resveratrol (RSV), a phytoalexin from grapes and peanuts, has been reported to exhibit antiproliferative effects on various cancer cell lines. In breast cancer, RSV has been demonstrated to exert an antiproliferative effect on both hormone-dependent and hormone-independent breast cancer cell lines. However, RSV is a lipophilic drug, and its therapeutic effect could be improved through nanoencapsulation. Functionalizing polymeric nanoparticles based on polycaprolactone (PCL) with polyethylene glycol 1000 tocopheryl succinate (TPGS) has been reported to prolong drug circulation and reduce drug resistance. However, the effect of TPGS on the physicochemical properties and biological effects of breast cancer cells remains unclear. Therefore, this study aimed to develop RSV-loaded PCL nanoparticles using nanoprecipitation and investigate the effect of TPGS on the nanoparticles' physicochemical characteristics (particle size, zeta potential, encapsulation efficiency, morphology, and release rate) and biological effects on the 4T1 breast cancer cell line (cytotoxicity and cell uptake), in vitro and in vivo. The optimized nanoparticles without TPGS had a size of 138.1 ± 1.8 nm, a polydispersity index (PDI) of 0.182 ± 0.01, a zeta potential of -2.42 ± 0.56 mV, and an encapsulation efficiency of 98.2 ± 0.87%, while nanoparticles with TPGS had a size of 127.5 ± 3.11 nm, PDI of 0.186 ± 0.01, zeta potential of -2.91 ± 0.90 mV, and an encapsulation efficiency of 98.40 ± 0.004%. Scanning electron microscopy revealed spherical nanoparticles with low aggregation tendency. Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR) identified the constituents of the nanoparticles and the presence of drug encapsulation in an amorphous state. In vitro release studies showed that both formulations followed the same dissolution profiles, with no statistical differences. In cytotoxicity tests, IC50 values of 0.12 µM, 0.73 µM, and 4.06 µM were found for the formulation without TPGS, with TPGS, and pure drug, respectively, indicating the potentiation of the cytotoxic effect of resveratrol when encapsulated. Flow cytometry and confocal microscopy tests indicated excellent cellular uptake dependent on the concentration of nanoparticles, with a significant difference between the two formulations, suggesting that TPGS may pose a problem in the endocytosis of nanoparticles. The in vivo study evaluating the antitumor activity of the nanoparticles confirmed the data obtained in the in vitro tests, demonstrating that the nanoparticle without TPGS significantly reduced tumor volume, tumor mass, maintained body weight, and improved survival in mice. Moreover, the biochemical evaluation evidenced possible hepatotoxicity for formulation with TPGS.

Chitosan functionalized PCL nanoparticles bearing tyrosine kinase inhibitor osimertinib mesylate for effective lung cancer therapy

Lung cancer ranks second position among the cancer-related deaths. Osimertinib mesylate (OSM) is a tyrosine-kinase-inhibitor which can effectively treat non-small cell lung cancer (NSCLC), but still there are certain limitations and side effects which could be circumvented by polymeric nanoparticles approach. Hence, this research was aimed to develop drug-loaded biodegradable polycaprolactone nanoparticles (PCL-NPs) such as OSM-loaded PCL-NPs (PCL-OSM-NPs) and chitosan fabricated OSM-loaded PCL-NPs (CS-PCL-OSM-NPs) to achieve active-targeting of OSM in the cancerous lung tissue. Thus, CS-PCL-OSM-NPs enhance the anticancer efficacy due to active targeting nature and thereby reduces off-target side effects of OSM in the NSCLC treatment. Blank PCL-NPs, PCL-OSM-NPs, and CS-PCL-OSM-NPs were prepared by nanoprecipitation method. Optimized blank PCL-NPs, PCL-OSM-NPs, and CS-PCL-OSM-NPs exhibited the mean particle size of 90.2 ± 4.7 nm, 167.7 ± 2.9 nm, and 233.7 ± 4.8 nm respectively. The encapsulation efficiency % (%EE) of PCL-OSM-NPs was found to be 68.4 ± 3.2%. In vitro drug release study demonstrated sustained release profile of 69.5 ± 5% and 65.7 ± 1.5% for OSM from both the PCL-OSM-NPs and CS-PCL-OSM-NPs, respectively. The PCL-OSM-NPs and CS-PCL-OSM-NPs demonstrated the inhibition of 82.2 ± 0.5% and 81.9 ± 0.2% in A549 cancer cells respectively which clearly signified the improved efficacy. Moreover, the PCL-OSM-NPs and CS-PCL-OSM-NPs exhibited significantly less hemolysis than OSM indicating safety of the formulation. These findings indicate that biohemocompatible CS-PCL-OSM-NPs is an attractive option to treat NSCLC with enhanced anticancer activity and reduced side effects.

Retraction Note: A facile approach for fabricating CD44-targeted delivery of hyaluronic acid-functionalized PCL nanoparticles in urethane-induced lung cancer: Bcl-2, MMP-9, caspase-9, and BAX as potential markers.

Retraction Note: A facile approach for fabricating CD44-targeted delivery of hyaluronic acid-functionalized PCL nanoparticles in urethane-induced lung cancer: Bcl-2, MMP-9, caspase-9, and BAX as potential markers.