Polycaprolactone Nanoparticles Research Articles

Development of alginate and alginate sulfate/polycaprolactone nanoparticles for growth factor delivery in wound healing therapy

Connective tissue growth factor (CTGF) holds great promise for enhancing the wound healing process; however, its clinical application is hindered by its low stability and the challenge of maintaining its effective concentration at the wound site. Herein, we developed novel double-emulsion alginate (Alg) and heparin-mimetic alginate sulfate (AlgSulf)/polycaprolactone (PCL) nanoparticles (NPs) for controlled CTGF delivery to promote accelerated wound healing. The NPs’ physicochemical properties, cytocompatibility, and wound healing activity were assessed on immortalized human keratinocytes (HaCaT), primary human dermal fibroblasts (HDF), and a murine cutaneous wound model. The synthesized NPs had a minimum hydrodynamic size of 200.25 nm. Treatment of HaCaT and HDF cells with Alg and AlgSulf2.0/PCL NPs did not show any toxicity when used at concentrations <50 µg/mL for up to 72 h. Moreover, the NPs’ size was not affected by elevated temperatures, acidic pH, or the presence of a protein-rich medium. The NPs have slow lysozyme-mediated degradation implying that they have an extended tissue retention time. Furthermore, we found that treatment of HaCaT and HDF cells with CTGF-loaded Alg and AlgSulf2.0/PCL NPs, respectively, induced rapid cell migration (76.12% and 79.49%, P<0.05). Finally, in vivo studies showed that CTGF-loaded Alg and AlgSulf2.0/PCL NPs result in the fastest and highest wound closure at the early and late stages of wound healing, respectively (36.49%, P<0.001 on day 1; 90.45%, P<0.05 on day 10), outperforming free CTGF. Double-emulsion NPs based on Alg or AlgSulf represent a viable strategy for delivering heparin-binding GF and other therapeutics, potentially aiding various disease treatments.

Co-Delivery of an Innovative Organoselenium Compound and Paclitaxel by pH-Responsive PCL Nanoparticles to Synergistically Overcome Multidrug Resistance in Cancer

In this study, we designed the association of the organoselenium compound 5′-Seleno-(phenyl)-3′-(ferulic-amido)-thymidine (AFAT-Se), a promising innovative nucleoside analogue, with the antitumor drug paclitaxel, in poly(ε-caprolactone) (PCL)-based nanoparticles (NPs). The nanoprecipitation method was used, adding the lysine-based surfactant, 77KS, as a pH-responsive adjuvant. The physicochemical properties presented by the proposed NPs were consistent with expectations. The co-nanoencapsulation of the bioactive compounds maintained the antioxidant activity of the association and evidenced greater antiproliferative activity in the resistant/MDR tumor cell line NCI/ADR-RES, both in the monolayer/two-dimensional (2D) and in the spheroid/three-dimensional (3D) assays. Hemocompatibility studies indicated the safety of the nanoformulation, corroborating the ability to spare non-tumor 3T3 cells and human mononuclear cells of peripheral blood (PBMCs) from cytotoxic effects, indicating its selectivity for the cancerous cells. Furthermore, the synergistic antiproliferative effect was found for both the association of free compounds and the co-encapsulated formulation. These findings highlight the antitumor potential of combining these bioactives, and the proposed nanoformulation as a potentially safe and effective strategy to overcome multidrug resistance in cancer therapy.

A comprehensive review on alpha-lipoic acid delivery by nanoparticles

Alpha-lipoic acid (ALA) has garnered significant attention for its potential therapeutic benefits across a wide spectrum of health conditions. Despite its remarkable antioxidant properties, ALA is hindered by challenges such as low bioavailability, short half-life, and unpleasant odor. To overcome these limitations and enhance ALA's therapeutic efficacy, various nanoparticulate drug delivery systems have been explored. This comprehensive review evaluates the application of different nanoparticulate carriers, including lipid-based nanoparticles (solid lipid nanoparticles, niosomes, liposomes, nanostructured lipid carriers (NLCs), and micelles), nanoemulsions, polymeric nanoparticles (nanocapsules, PEGylated nanoparticles, and polycaprolactone nanoparticles), films, nanofibers, and gold nanoparticles, for ALA delivery. Each nanoparticulate system offers unique advantages, such as improved stability, sustained release, enhanced bioavailability, and targeted delivery. For example, ALA-loaded SLNs demonstrated benefits for skin care products and skin rejuvenation. ALA encapsulated in niosomes showed potential for treating cerebral ischemia, a condition largely linked to stroke. ALA-loaded cationic nanoemulsions showed promise for ophthalmic applications, reducing vascular injuries, and corneal disorders. Coating liposomes with chitosan further enhanced stability and performance, promoting drug absorption through the skin. This review provides a comprehensive overview of the advancements in nanoparticulate delivery systems for ALA, highlighting their potential to overcome the limitations of ALA administration and significantly enhance its therapeutic effectiveness. These innovative approaches hold promise for the development of improved ALA-based treatments across a broad spectrum of health conditions.

Magnetic scaffold constructing by micro-injection for bone tissue engineering under static magnetic field

The utilization of static magnetic fields in conjunction with tissue engineering scaffolds has demonstrated significant potential in the restoration of bone defects. However, previous techniques used for fabricating magnetic tissue engineering scaffolds have shown certain shortcomings that require further investigation. In this study, a series of scaffolds made from a combination of polylactic acid (PLA), polycaprolactone (PCL), and iron tetraoxide (Fe3O4) nanoparticles were designed and prepared using the microinjection molding technique. The composite scaffolds, which were doped with nanoparticles and fabricated through microinjection, exhibited exceptional physicochemical properties and biocompatibility. Additionally, the PLA/PCL/Fe3O4 scaffolds were found to promote the proliferation and adhesion of bone marrow cells (BMSCs) under relatively low magnetic fields (25–30 mT). These findings suggest that PLA/PCL/Fe3O4 scaffolds hold great potential for use in bone tissue engineering applications.

A remodeled ivermectin polycaprolactone-based nanoparticles for inhalation as a promising treatment of pulmonary inflammatory diseases

In recent years, ivermectin (IVM), an antiparasitic drug of low water solubility and poor oral bioavailability, has shown a profound effect on inflammatory mediators involved in diseases, such as acute lung injury, lung fibrosis, and COVID-19. In order to maximize drug bioavailability, polymeric nanoparticles can be delivered through nebulizers for pulmonary administration. The aim of this study was to prepare IVM-loaded polycaprolactone (PCL) nanoparticles (NPs) by solvent evaporation method. Box-Benkhen design (BBD) was used to optimize entrapment efficiency (Y1), percent drug release after 6 h (Y2), particle size (Y3), and zeta potential (Y4). A study was conducted examining the effects of three independent variables: PCL-IVM ratio (A), polyvinyl alcohol (PVA) concentration (B), and sonication time (C). The optimized formula was also compared to the oral IVM dispersion for lung deposition, in-vivo behavior, and pharmacokinetic parameters. The optimized IVM-PCL-NPs formulation was spherical in shape with entrapment efficiency (% EE) of 93.99 ± 0.96 %, about 62.71 ± 0.53 % released after 6 h, particle size of 100.07 ± 0.73 nm and zeta potential of -3.30 ± 0.23 mV. Comparing the optimized formulation to IVM-dispersion, the optimized formulation demonstrated greater bioavailability with greater area under the curve AUC0–t of 710.91 ± 15.22 μg .ml−1.h for lung and 637.97 ± 15.43 μg .ml−1.h for plasma. Based on the results, the optimized NPs accumulated better in lung tissues, exhibiting a twofold longer residence time (MRT 4.78 ± 0.55 h) than the IVM-dispersion (MRT 2.64 ± 0.64 h). The optimized nanoparticle formulation also achieved higher cmax (194.90 ± 5.01 μg/ml), and lower kel (0.21 ± 0.04 h−1) in lungs. Additionally, the level of inflammatory mediators was markedly reduced. To conclude, inhalable IVM-PCL-NPs formulation was suitable for the pulmonary delivery and may be one of the most promising approaches to increase IVM bioavailability for the successful treatment of a variety of lung diseases.

Erythrocyte membrane-coated nanocarriers modified by TGN for Alzheimer's disease

Alzheimer's disease (AD) is an aging-related neurodegenerative disease, and the main pathological feature was β-amyloid protein (Aβ) deposition. Recently, bioactive materials-based drug delivery system has been widely investigated for the treatment of AD. In this study, we developed a red blood cells (RBC) membrane-coated polycaprolactone (PCL) nanoparticles (NPs) loading with a therapeutic agent for AD, curcumin (Cur). A functional peptide TGNYKALHPHN (TGN) was conjugated to the surface of membrane for blood-brain barrier (BBB) transport (TGN-RBC-NPs-Cur). TGN peptide can be recognized by receptors on the BBB and has great potential for brain transport. To confirm the targeted delivery of Cur to the brain, a cell co-culturing immortalized human cerebral microvascular endothelial cells and human brain astrocytes glioblastoma (hCMEC/D3 and U-118MG) in vitro model was established. As a result, the BBB transporting ratio of TGN-RBC-NPs-FITC was 29.64% at 12 h which was approximately eight-fold than RBC-NPs-FITC. The improvement of drug accumulation in the AD lesion was confirmed by the NPs modified with the BBB-penetrating peptide in the fluorescence imaging and quantitative analysis with UPLC-MS/MS in vivo. The neuroprotective effects were evaluated with new object recognition behavioral test, in vitro AD cell model, dendritic spine stain, GFAP and IBA1 immunofluorescence stain. The spatial learning and memory abilities of the AD model mice treated with TGN-RBC-NPs-Cur were obviously enhanced compared with the AD control mice and were also better than Cur at the same dosage. These results were consistent with the values of protection index of rat adrenal pheochromocytoma cells (PC12 cells) treated by Aβ25–35. TGN-RBC-NPs-Cur increased the dendritic segments densities and restrained activation of microglia and astrocytes of AD mice, as well as reversed cognitive function of AD mice. All of the results demonstrated TGN-RBC-NPs-Cur a promising therapeutic strategy for delaying the progression of AD by designing biomimetic nanosystems to deliver drugs into the brain.

Fabrication and evaluation of the regenerative effect of a polycaprolactone/chitosan nanofibrous scaffold containing bentonite nanoparticles in a rat model of deep second-degree burn injury.

In the present study, we evaluated the effect of a nanofibrous scaffold including polycaprolactone (PCL), chitosan (CHT), and bentonite nanoparticles (Ben-NPS) on wound healing in order to introduce a novel dressing for burn wounds. PCL, PCL/CHT, and PCL/CHT/Ben-NPS nanofibrous scaffolds were fabricated by the electrospinning technique. Their structural and physiochemical characteristics were investigated by Fourier-transform infrared spectroscopy (FTIR) analysis, scanning electron microscopy (SEM), tensile strength, water contact angle, as well as, swelling and degradation profiles test. The disc diffusion assay was carried out to investigate the antibacterial potential of the scaffolds. In addition, the cell viability and proliferation ability of human dermal fibroblasts (HDFs) on the scaffolds were assessed using MTT assay as well as SEM imaging. The wound-healing property of the nanofibrous scaffolds was evaluated by histopathological investigations during 3,7, and 14 days in a rat model of burn wounds. SEM showed that all scaffolds had three-dimensional, beadles-integrated structures. Adding Ben-NPS into the PCL/CHT polymeric composite significantly enhanced the mechanical, swelling, and antibacterial properties. HDFs had the most cell viability and proliferation values on the PCL/CHT/Ben-NPS scaffold. Histopathological evaluation in the rat model revealed that dressing animal wounds with the PCL/CHT/Ben-NPS scaffold promotes wound healing. The PCL/CHT/Ben-NPS scaffold has promising regenerative properties for accelerating skin wound healing.

Chitosan-Coated Azithromycin/Ciprofloxacin-Loaded Polycaprolactone Nanoparticles: A Characterization and Potency Study.

Antimicrobial resistance is a major health hazard worldwide. Combining azithromycin (AZ) and ciprofloxacin (CIP) in one drug delivery system was proposed to boost their antibacterial activity and overcome resistance. This study aims to improve azithromycin and ciprofloxacin activity by co-encapsulating them inside chitosan-coated polymeric nanoparticles and evaluating their antibacterial activity. The double emulsion method was employed to co-encapsulate AZ/CIP inside chitosan-coated polymeric nanoparticles. The formulations were evaluated for their nanoparticle size, size distribution, and zeta potential. Differential scanning calorimetry (DSC) analysis characterized the formula's thermal sustainability. Encapsulation efficiency was measured by HPLC and spectrophotometric analysis. Morphological studies used the Transmission Electron Microscopy (TEM). The in vitro release profiles of both AZ and CIP were monitored utilizing the dialysis membrane bag method. The micro-dilution assay assessed the antimicrobial activity against a clinical isolate of Klebsiella pneumoniae. The prepared AZ/CIP-poly-caprolactone nanoparticles were spherical; their size range was 184.0 ± 3.3-190.4 ± 5.6 nm and had high size uniformity (poly-dispersity index below 0.2). The zeta potential ranged from -21.2 ± 2.4 to -27.0 ± 2.5 mV, while chitosan-coated nanoparticles showed a positive zeta potential value ranging from 8 to 11 mV. The thermal study confirmed the amorphous state of both antibiotics inside the nanoparticles. The results of the in vitro release study indicated a slow and uniform rate of release for both drugs extended over 4-days, with a faster rate in the case of AZ. The MIC values reported for both chitosan-coated NP have been tremendously reduced by at least 15 folds of pure CIP and more than 60 folds of pure AZ. The co-encapsulation of AZ/CIP into chitosan-coated polymeric nanoparticles has been successfully achieved. The produced particles showed many beneficial attributes of uniform particle sizes below 200 nm and high zeta potential values. Chitosan-coated polymeric nanoparticles extensively enhanced the antibacterial activity of both AZ/CIP against bacteria.

Preparation, Characterization, and Release Profile Study of Vincristine Sulfate-loaded Polycaprolactone Nanoparticles

Background: Vincristine sulfate is commonly used to treat different types of cancers. However, its effectiveness is hindered by undesirable side effects, which significantly limit its applications in medicine. Objective: This study aims to prepare vincristine nanoparticles, in order to develop a promising approach for cancer therapy. Methods: Vincristine nanoparticles were prepared by utilizing polycaprolactone as a carrier through the double emulsion method. The morphological characteristics and particle size of the vincristine nanoparticles were examined. The surface charge and average dynamic size, encapsulation efficiency in addition to release profile study were also evaluated. Results: Dynamic Light Scattering confirmed the small size of nanoparticles (~200 nm). SEM showed spherical-shaped nanoparticles with smooth surfaces, and the polydispersity index values of the prepared nanoparticles were below 0.5 in all preparations. The zeta potential of the nanoparticles was found to be negative, which can be attributed to the presence of carboxylic groups in the PCL polymer, The encapsulation efficiency of Vincristine-loaded nanoparticles (NPs) varied from 36% to 57% for all the prepared NPs with varying amounts of PCL. The release profile demonstrated a prolonged release of Vincristine from the nanoparticles compared to the Vincristine solution. Conclusion: The double emulsion solvent evaporation method was used successfully to prepare vincristine- loaded PCL nanoparticles, which suggests that nanoscale carriers hold promise as effective vehicles for delivering chemotherapeutic agents in the treatment of cancer.

Multifunctional epoxy/carbon composites with a fully reparable interface

AbstractIn this work, for the first time, carbon fibers (CFs) were coated with nanosized‐polycaprolactone (PCL) particles to obtain a functionalized self‐healable interphase, capable to fully recover the pristine interfacial shear strength with a debonded epoxy matrix. PCL nanoparticles were initially water‐dispersed at different concentrations and deposited on CFs by electrophoretic deposition. The application of various voltage levels resulted in different morphologies of the coating. Epoxy microdroplets were deposited and cured on neat and PCL‐coated fibers. After complete interfacial debonding by microdebonding tests, an electric current was applied on CFs to activate a thermal interfacial healing by Joule effect. The healing efficiency was estimated as the ratio of interfacial shear strength measured before and after healing. An outstanding repairing efficiency was obtained upon thermal mending with a complete recovery of the original interfacial shear strength, thus indicating a strong potential of the PCL nanocoating as interfacial healing agent for composite structures.Highlights CFs were coated with nanosized‐PCL particles to obtain a functionalized self‐healable interphase. Electrophoretic deposition was employed for the fiber coating. Microdebonding tests were performed to assess the fiber/matrix interfacial properties in terms of interfacial shear strength. A full recovery of the interfacial properties was obtained via thermal interfacial healing by Joule effect.

Biodegradation of Poly(ethylene terephthalate) by Bacillus safensis YX8.

Due to the extensive utilization of poly (ethylene terephthalate) (PET), a significant amount of PET waste has been discharged into the environment, endangering both human health and the ecology. As an eco-friendly approach to PET waste treatment, biodegradation is dependent on efficient strains and enzymes. In this study, a screening method was first established using polycaprolactone (PCL) and PET nanoparticles as substrates. A PET-degrading strain YX8 was isolated from the surface of PET waste. Based on the phylogenetic analysis of 16S rRNA and gyrA genes, this strain was identified as Bacillus safensis. Strain YX8 demonstrated the capability to degrade PET nanoparticles, resulting in the production of terephthalic acid (TPA), mono (2-hydroxyethyl) terephthalic acid (MHET), and bis (2-hydroxyethyl) terephthalic acid (BHET). Erosion spots on the PET film were observed after incubation with strain YX8. Furthermore, the extracellular enzymes produced by strain YX8 exhibited the ability to form a clear zone on the PCL plate and to hydrolyze PET nanoparticles to generate TPA, MHET, and BHET. This work developed a method for the isolation of PET-degrading microorganisms and provides new strain resources for PET degradation and for the mining of functional enzymes.

Curcumin and resveratrol delivery from multi-functionalized calcium phosphate scaffold enhances biological properties

Natural medicinal compounds (NMCs) can assist effectively in treating bone disorders. NMC release kinetics from a ceramic bone tissue engineering scaffold can be tailored. However, inferior physicochemical properties halt their therapeutic applications and need a carrier system for delivery. We developed a multi-functionalized scaffold to understand the effect of curcumin (Cur) and resveratrol (Rsv) on in vitro biological properties. Polycaprolactone (PCL) nanoparticles encapsulated resveratrol in the polymeric matrix. Nanoparticles showed a hydrodynamic diameter of about 180 nm, −16 mV zeta potential, and up to ∼65 % encapsulation efficiency. Scaffolds made of zinc-doped tricalcium phosphate (Zn-TCP) were coated with curcumin followed by either resveratrol (Cur-Rsv) or resveratrol nanoparticles (Cur-Rsv-NP). NMC-loaded scaffolds exhibited a biphasic release pattern over 60 days. Solubility and hydrophobic-hydrophilic interactions affected the NMC release profile. Resveratrol showed rapid release as compared to curcumin. The treated scaffold increased the cell viability of human fetal osteoblast (hFOB) by 1.8-fold as compared to the control. It exhibited a 6-fold increase in cytotoxicity toward osteosarcoma (MG-63) cells as compared to the untreated scaffold. NMCs loaded scaffold effectively inhibited Staphylococcus aureus from colonizing over the scaffold. Zinc doping enhanced osteoblast growth and prevented bacterial colony formation. Such design principle provided a direction for developing multi-functionalized calcium phosphate (CaP) scaffolds against bone diseases for orthopedic applications.

Microfluidic-Assisted Formulation of ε-Polycaprolactone Nanoparticles and Evaluation of Their Properties and In Vitro Cell Uptake.

The nanoprecipitation method was used to formulate ε-polycaprolactone (PCL) into fluorescent nanoparticles. Two methods of mixing the phases were evaluated: introducing the organic phase into the aqueous phase dropwise and via a specially designed microfluidic device. As a result of the nanoprecipitation process, fluorescein-loaded nanoparticles (NPs) with a mean diameter of 127 ± 3 nm and polydispersity index (PDI) of 0.180 ± 0.009 were obtained. The profiles of dye release were determined in vitro using dialysis membrane tubing, and the results showed a controlled release of the dye from NPs. In addition, the cytotoxicity of the NPs was assessed using an MTT assay. The PCL NPs were shown to be safe and non-toxic to L929 and MG63 cells. The results of the present study have revealed that PCL NPs represent a promising system for developing new drug delivery systems.

Development of Statistically Optimized Piperine-Loaded Polymeric Nanoparticles for Breast Cancer: In Vitro Evaluation and Cell Culture Studies.

Piperine (PPN) is a natural alkaloid derived from black pepper (Piper nigrum L.) and has garnered substantial attention for its potential in breast cancer therapy due to its diverse pharmacological properties. However, its highly lipophilic characteristics and poor dissolution in biological fluids limit its clinical application. Therefore, to overcome this limitation, we formulate and evaluate PPN-encapsulated polycaprolactone (PCL) nanoparticles (PPN-PCL-NPs). The nanoparticles were prepared by a single-step nanoprecipitation method and further optimized by a formulation design approach. The influence of selected independent variables PCL (X1), poloxamer 188 (P-188; X2), and stirring speed (SS; X3) were investigated on the particle size (PS), polydispersity index (PDI), and % encapsulation efficiency (EE). The selected optimized nanoparticles were further assessed for stability, in vitro release, and in vitro antibreast cancer activity in the MCF-7 cancer cell line. The PS, PDI, zeta potential, and % EE of the optimized PPN-PCL-NPs were observed to be 107.61 ± 5.28 nm, 0.136 ± 0.011, -20.42 ± 1.82 mV, and 79.53 ± 5.22%, respectively. The developed PPN-PCL-NPs were stable under different temperature conditions with insignificant changes in their pharmaceutical attributes. The optimized PPN-PCL-NPs showed a burst release for the first 6 h and later showed sustained release for 48 h. The PPN-PCL-NPs exhibit exceptional cytotoxic effects in MCF-7 breast tumor cells in comparison with the native PPN. Thus, the formulation of PPN-loaded PCL-NPs can be a promising approach for better therapeutic efficacy against breast cancer.

Piperine Extraction and Encapsulation in Polycaprolactone Nanoparticles

Black pepper, a commonly utilized culinary condiment, holds significant importance in Ayurvedic and Chinese medicinal practices due to its various biological benefits, including antioxidant, antimicrobial, and anti-inflammatory properties. To amplify these attributes and enhance their efficacy in formulations, the utilization of nanocarriers presents a promising approach. Thus, the objective of this study was to obtain a pepper extract, evaluate its constituents, and encapsulate it in polymeric nanoparticles. The ethanol extract of the grains powder had a higher concentration of piperine and better antioxidant activity when compared to whole grains. Pepper extract encapsulation efficiency in terms of piperine concentration was 84.8 ± 3.5%, and a sustained and prolonged release profile was observed, as well as other studies in the literature using polycaprolactone (PCL). The presence of the extract did not change the instability index and the sedimentation velocity of the nanoparticles, as well as the polydispersity index and the zeta potential of nanoparticles. However, there was a difference in the mean size and concentration of particles. This study highlights the potential of PCL nanoparticles as a promising delivery system for black pepper extract, which could have various applications in the cosmetic and pharmaceutical industries, maximizing the benefits of black pepper extract.

Tuning the Emulsion Properties Influences the Size of Poly(Caprolactone) Particles for Drug Delivery Applications.

Advances in drug delivery have been accelerated with the addition of polymeric drug carriers. Direct delivery to a target site is a promising step in developing effective drug and gene therapies to treat disease. The efficacy of these drug carriers heavily relies on cell uptake without compromising critical cellular processes that promote cell viability. Drug release from biodegradable polymers is mediated largely by polymer degradation, and therefore the rate of polymer degradation dictates the feasibility of drug delivery applications. Traditionally, poly(caprolactone) (PCL) has only been used in long-term biomedical applications because the degradation time is much slower than other polymers. However, the biocompatibility of this polymer and the potential for longer delivery windows renders it a promising polymer candidate for drug delivery. In this work, we outline sixteen emulsion solvent evaporation preparation methods for PCL nanoparticles and microparticles to develop particles between 300nm and 1.7μm and with zeta potentials of -1.8mV. We further investigated particles in a size range suitable for systemic tumor delivery and inhaled aerosol delivery to determine cell biocompatibility with the polymer in lung adenocarcinoma, endometrial adenocarcinoma, and human embryonic kidney cells. We determined these particles aren't detrimental to cell viability below particle monolayer coverage atop cells and therefore these formulations hold promise for the next stage of development as sustained-release drug delivery carriers.

New Advances in Nano-Enabled Weed Management Using Poly(Epsilon-Caprolactone)-Based Nanoherbicides: A Review

The number of effective herbicides available to farmers is steadily decreasing due to increasing herbicide resistance. It seems very important to address and effectively deal with the main weed management challenges (low crop yield and environmental pollution) by investigating the potential of newly introduced materials, such as biocompatible polymer-based nanoparticles. The current review aims to encourage agricultural or environmental researchers to conduct new research on the synthesis and application of modified herbicides, such as nanoherbicides, for application in weed management and to provide a comprehensive foundation on the topic. Such nanosystems could help with the promotion of the controlled release of active ingredients and extend their action time, resulting in a reduction in dose and application number; improve the physical and chemical characteristics of the herbicide to increase foliar adhesion; prevent degradation that results from environmental factors (such as sunlight, temperature, microorganisms, or pH); and decrease herbicide leaching and contamination of the environment. Furthermore, it has been indicated that some polymeric nanocarriers can penetrate biological barriers, including membranes and plant cell walls, and translocate across vascular tissues, resulting in a more efficient delivery of active ingredients. Poly(epsilon-caprolactone) is a biocompatible material that is easily decomposable by enzymes and fungi. PCL nanoparticles could be applied as nanocarriers of herbicides in agriculture due to their low toxicity, their potential for large-scale synthesis from inexpensive materials, their ability to dissolve herbicides, their high loading capacity, and their ability to help minimize the chemical decomposition of herbicides.

Optimization of Bromocriptine-Mesylate-Loaded Polycaprolactone Nanoparticles Coated with Chitosan for Nose-to-Brain Delivery: In Vitro and In Vivo Studies.

Bromocriptine mesylate (BM), primarily ergocryptine, is a dopamine agonist derived from ergot alkaloids. This study aimed to formulate chitosan (CS)-coated poly ε-caprolactone nanoparticles (PCL NPs) loaded with BM for direct targeting to the brain via the nasal route. PCL NPs were optimized using response surface methodology and a Box-Behnken factorial design. Independent formulation parameters for nanoparticle attributes, including PCL payload (A), D-α-tocopherol polyethylene glycol 1000 succinate (TPGS) concentration (B), and sonication time (C), were investigated. The dependent variables were nanoparticle size (Y1), zeta potential (Y2), entrapment efficiency (EE; Y3), and drug release rate (Y4). The optimal formulation for BM-PCL NPs was determined to be 50 mg PCL load, 0.0865% TPGS concentration, and 8 min sonication time, resulting in nanoparticles with a size of 296 ± 2.9 nm having a zeta potential of -16.2 ± 3.8 mV, an EE of 90.7 ± 1.9%, and a zero-order release rate of 2.6 ± 1.3%/min. The optimized BM-PCL NPs were then coated with CS at varying concentrations (0.25, 0.5, and 1%) to enhance their effect. The CS-PCL NPs exhibited different particle sizes and zeta potentials depending on the CS concentration used. The highest EE (88%) and drug load (DL; 5.5%) were observed for the optimized BM-CS-PCL NPs coated with 0.25% CS. The BM-CS-PCL NPs displayed a biphasic release pattern, with an initial rapid drug release lasting for 2 h, followed by a sustained release for up to 48 h. The 0.25% CS-coated BM-CS-PCL NPs showed a high level of permeation across the goat nasal mucosa, with reasonable mucoadhesive strength. These findings suggested that the optimized 0.25% CS-coated BM-CS-PCL NPs hold promise for successful nasal delivery, thereby improving the therapeutic efficacy of BM.

Biocompatibility Assessment of Polycaprolactone/Polylactic Acid/Zinc Oxide Nanoparticle Composites under In Vivo Conditions for Biomedical Applications.

The increasing demand for non-invasive biocompatible materials in biomedical applications, driven by accidents and diseases like cancer, has led to the development of sustainable biomaterials. Here, we report the synthesis of four block formulations using polycaprolactone (PCL), polylactic acid (PLA), and zinc oxide nanoparticles (ZnO-NPs) for subdermal tissue regeneration. Characterization by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) confirmed the composition of the composites. Additionally, the interaction of ZnO-NPs mainly occurred with the C=O groups of PCL occurring at 1724 cm-1, which disappears for F4, as evidenced in the FT-IR analysis. Likewise, this interaction evidenced the decrease in the crystallinity of the composites as they act as crosslinking points between the polymer backbones, inducing gaps between them and weakening the strength of the intermolecular bonds. Thermogravimetric (TGA) and differential scanning calorimetry (DSC) analyses confirmed that the ZnO-NPs bind to the carbonyl groups of the polymer, acting as weak points in the polymer backbone from where the different fragmentations occur. Scanning electron microscopy (SEM) showed that the increase in ZnO-NPs facilitated a more compact surface due to the excellent dispersion and homogeneous accumulation between the polymeric chains, facilitating this morphology. The in vivo studies using the nanocomposites demonstrated the degradation/resorption of the blocks in a ZnO-NP-dependant mode. After degradation, collagen fibers (Type I), blood vessels, and inflammatory cells continue the resorption of the implanted material. The results reported here demonstrate the relevance and potential impact of the ZnO-NP-based scaffolds in soft tissue regeneration.

Asymmetrical interactions between nanoparticles and proteins arising from deformation upon adsorption to surfaces

Drug release from polymeric nanoparticles (NPs) is governed by their adsorption onto cell membranes and transmigration across cell walls. These steps are influenced by their interactions with proteins near the cells. These interactions were investigated by studying the sequential adsorption of plasma proteins, albumin (Alb) and fibrinogen (Fg), and micellar NPs using quartz crystal microbalance with dissipation (QCMD), X-ray photoelectron spectroscopy (XPS), and small-angle X-ray scattering (SAXS). The three NPs in the study all have poly(ethylene glycol) (PEG) shells but different cores: amorphous poly(propylene oxide) (PPO), crystalline polycaprolactone (PCL), and poly(desaminotyrosyl-tyrosine octyl ester-co-suberic acid) (DTO-SA). None of the NPs adsorbed onto a pre-adsorbed Fg layer. On the other hand, when the deposition sequence was reversed, Fg was adsorbed onto DTO-SA NP and PCL NP surfaces, but not onto the PPO NP surface. The interactions with Alb were different: DTO-SA did not adsorb onto Alb and vice versa; PPO NP adsorbed onto an Alb layer, but Alb did not adsorb onto the PPO NP layer; and PCL NP reversibly adsorbed onto Alb, but Alb displaced pre-adsorbed PCL NP. Thus, in most instances, the adsorption behavior was asymmetric in that it was dependent on the order of arrival of the adsorbates at the substrate. SAXS data did not show evidence for complex formation in solution. Thus, the solution behavior appears not to be a predictor of the interaction of proteins and the NPs near surfaces. Differing strengths of pairwise interactions of proteins, NPs and substrates account for this adsorption behavior. These differences in interactions could be the results of deformation of the adsorbates immobilized at the surface and the different degrees of surface remodeling that occur upon adsorption. Deformation could lead to disassembly of the NPs that has implications on their ability to release their payload of drugs upon adsorption onto tissue surfaces.