Polylysine Research Articles

Acellular scaffold-based approach for in situ genetic engineering of host T-cells in solid tumor immunotherapy

BackgroundTargeted T-cell therapy has emerged as a promising strategy for the treatment of hematological malignancies. However, its application to solid tumors presents significant challenges due to the limited accessibility and heterogeneity. Localized delivery of tumor-specific T-cells using biomaterials has shown promise, however, procedures required for genetic modification and generation of a sufficient number of tumor-specific T-cells ex vivo remain major obstacles due to cost and time constraints.MethodsPolyethylene glycol (PEG)-based three-dimensional (3D) scaffolds were developed and conjugated with positively charged poly-L-lysine (PLL) using carbamide chemistry for efficient loading of lentiviruses (LVs) carrying tumor antigen-specific T-cell receptors (TCRs). The physical and biological properties of the scaffold were extensively characterized. Further, the scaffold loaded with OVA-TCR LVs was implanted in B16F10 cells expressing ovalbumin (B16-OVA) tumor model to evaluate the anti-tumor response and the presence of transduced T-cells.ResultsOur findings demonstrate that the scaffolds do not induce any systemic inflammation upon subcutaneous implantation and effectively recruit T-cells to the site. In B16-OVA melanoma tumor-bearing mice, the scaffolds efficiently transduce host T-cells with OVA-specific TCRs. These genetically modified T-cells exhibit homing capability towards the tumor and secondary lymphoid organs, resulting in a significant reduction of tumor size and systemic increase in anti-tumor cytokines. Immune cell profiling revealed a significantly high percentage of transduced T-cells and a notable reduction in suppressor immune cells within the tumors of mice implanted with these scaffolds.ConclusionOur scaffold-based T-cell therapy presents an innovative in situ localized approach for programming T-cells to target solid tumors. This approach offers a viable alternative to in vitro manipulation of T-cells, circumventing the need for large-scale in vitro generation and culture of tumor-specific T-cells. It offers an off-the-shelf alternative that facilitates the use of host cells instead of allogeneic cells, thereby, overcoming a major hurdle.

Resin tags formation by modified Renewal MI formulations in a carious dentine model.

To determine which components in a new restorative material (Renewal MI) improve its ability to form resin tags within demineralized dentine. Varied components included polylysine (PLS), monocalcium phosphate (MCP), powder to liquid ratio (PLR), 4-methacryloyloxyethyl trimellitate anhydride (4META), and polypropylene glycol dimethacrylate (PPGDMA). Urethane dimethacrylate (UDMA), containing PPGDMA (24 wt%) and 4META (3 wt%), was mixed with glass filler with MCP (8 wt%) and PLS (5 wt%). PLR was 3:1 or 5:1. Reducing MCP and/or PLS to 4 and 2 wt% respectively or fully removing MCP, PLS, 4META or PPGDMA gave 16 formulations in total. Renewal MI, Z250 (with or without Scotchbond Universal adhesive) and Activa were used as commercial comparators. Collagen discs were obtained by totally demineralizing 2 mm thick, human, premolar, coronal dentine discs by immersion in formic acid (4M) for 48 h. The restorative materials were then applied on top (n = 3), before dissolving the collagen in sodium hypochlorite (15%). SEM/EDX was employed to determine resin tags length, composition, and surface coverage. Tags were >400, 20 and 200 µm and covered 62, 55 and 39% of the adhesion interface for Renewal MI, Scotchbond and Activa, respectively. With experimental formulations, they were 200 and >400 µm long with high vs. low PLR and composed primarily of polymerized monomers. Percentages of the adhesion interface covered varied between 35 and 84%. Reducing PLS or MCP caused a decline in coverage that was linear with their concentrations. Reducing MCP had lesser effect when PLS or PLR were low. Removal of 4META caused a greater reduction in coverage than PPGDMA removal. PLS, MCP, 4META, PPGDMA and low PLR together enhance Renewal MI tags formation in, and thereby sealing of, demineralized dentine.

Peripheral adsorption of polylysine on one leaflet of a lipid bilayer reduces the lipid diffusion of both leaflets.

Understanding polycation-lipid interaction is essential not only in molecular biology but also in the biomedical industry and pharmacology. However, the effect of the polycation-lipid interaction on the molecular properties of lipids in biomembranes remains elusive. Here, two fluorescence correlation spectroscopies (FCSs), pulse-interleaved excitation (PIE) FCS and lifetime-based FCS, were performed to elucidate the change in the lipid diffusion of a model biomembrane induced by polylysine (PLL) adsorption. The results of PIE-FCS showed that the diffusions of both anionic and zwitterionic lipids become slower in the presence of PLL but the mobility of the anionic lipids is much reduced, suggesting the preferential interaction between the PLL and the anionic lipids due to the electrostatic attraction. Furthermore, leaflet-specific lipid diffusion analysis by lifetime-based FCS clearly showed that PLL adsorption on one leaflet of the membrane reduces the lipid diffusion of both leaflets in the same manner. This clearly indicates that the interleaflet coupling is strong in the presence of PLL.

A multifunctional nanoplatform for precision-guided therapeutic intervention in bacterial infection.

Skin wound infection has become a global clinical problem in recent years. Curcumin (Cur) and polylysine (PLL) are natural products with strong antibacterial properties. However, the poor water solubility and low stability of Cur and the cationic toxicity of PLL limit their application. In this study, we synthesized a macromolecular hyaluronic acid (HA)-curcumin drug (HC) via esterification. HC was attracted by electrostatic interactions with positively charged PLL to form a spherical nanocomplex (HCP) with hyaluronidase (HAase) and pH dual response under ultrasonication. HCP was found to target the bacterial infection microenvironment and release Cur and PLL for synergistic antibacterial action. In addition, HCP was proven to exhibit good biocompatibility and broad spectrum antibacterial activity to bacterial strains S. aureus and E. coli and antibacterial biofilm activities in vitro. In vivo experiments showed that HCP could inhibit pathogens and promote wound healing. These results prove that HCP can be used as a new strategy for the treatment and management of infected wounds.

An electrochemical aptasensor based on silver-thiolated graphene for highly sensitive detection of Pb2.

The presence of lead ions (Pb2+) in the environment not only leads to environmental contamination but also poses a significant risk to public health through their migration into food and drinking water. Therefore, the development of rapid and effective techniques for detection of trace amounts of Pb2+ is crucial for safeguarding both the environment and biosafety. In this study, an aptamer-based electrochemical sensor was developed for specific detection of Pb2+ by modifying a polylysine (PLL) coated silver-thiolated graphene (Ag-SH-G) nanocomposite (PLL/Ag-SH-G) on the surface of a glassy carbon electrode, which was further modified with gold nanoparticles (AuNPs) for attachment of aptamers (Apt) that specifically recognized Pb2+. The Ag-SH-G particles were synthesized using a one-step in situ method, resulting in significantly enhanced electrochemical properties upon incorporating Ag nanoparticles into the PLL/Ag-SH-G composite. Coating of the covalently or no-covalently bonded Ag-SH-G particles with PLL provides an excellent supporting matrix, facilitating the assembly of AuNPs and a thiol-modified aptamer for Pb2+. Under optimized conditions, Apt/AuNPs/PLL/Ag-SH-G/GCE exhibited excellent sensing performance for Pb2+ with a wide linear response range (10-1000 nM), a low detection limit (0.047 nM) and extraordinary selectivity. The sensor was employed and satisfactory results were obtained in river water, soil and vegetable samples for the detection of Pb2+.

Targeting DAD1 gene with CRISPR-Cas9 system transmucosally delivered by fluorinated polylysine nanoparticles for bladder cancer intravesical gene therapy.

Background: Intravesical chemotherapy is highly recommended after transurethral resection of bladder tumor for patients with bladder cancer (BCa). However, this localized adjuvant therapy has drawbacks of causing indiscriminate damage and inability to penetrate bladder mucosal. Methods: Fluorinated polylysine micelles (PLLF) were synthesized by reacting polylysine (PLL) with heptafluorobutyrate anhydride. Anti-apoptotic gene defender against cell death 1 (DAD1) was selected by different gene expression analysis between BCa patients and healthy individuals and identified by several biological function assays. The gene transfection ability of PLLF was verified by multiple in vitro and in vivo assays. The therapeutic efficiency of PLLF nanoparticles (NPs) targeting DAD1 were confirmed by intravesical administration using an orthotopic BCa mouse model. Results: Decorated with fluorinated chains, PLL can self-assemble to form NPs and condense plasmids with excellent gene transfection efficiency in vitro. Loading with the CRISPR-Cas9 system designed to target DAD1 (Cas9-sgDAD1), PLLF/Cas9-sgDAD1 NPs strongly inhibited the expression of DAD1 in BCa cells and induced BCa cell apoptosis through the MAPK signaling pathway. Furthermore, intravesical administration of PLLF/Cas9-sgDAD1 NPs resulted in significant therapeutic outcomes without systemic toxicity in vivo. Conclusion: The synthetized PLLF can transmucosally deliver the CRISPR-Cas9 system into orthotopic BCa tissues to improve intravesical instillation therapy for BCa. This work presents a new strategy for targeting DAD1 gene in the intravesical therapy for BCa with high potential for clinical applications.

A bioinspired pseudopeptide-based intracellular delivery platform enhances the cytotoxicity of a ribosome-inactivating protein through multiple death pathways.

Saporin is a 28 621 Da protein and plant toxin possessing rRNA N-glycosidase activity. Due to its potent ribosome-inactivating ability, saporin is commonly studied as an anticancer agent. However, its enzymatic activity is greatly hindered by its poor plasma membrane permeability. To overcome this barrier, we used a bioinspired intracellular delivery platform based on the pH-responsive pseudopeptide, poly(L-lysine isophthalamide) grafted with L-phenylalanine at a stoichiometric molar percentage of 50% (PP50). PP50 was co-incubated with saporin (PP50/saporin) in a mildly acidic pH environment to aid intracellular delivery and increase saporin's therapeutic potential. We demonstrated that PP50 greatly enhanced the cytotoxicity of saporin in the 2D monolayer of A549 cells and 3D A549 multicellular spheroids whilst remaining non-toxic when administered alone. To elucidate the mechanism of cell death, we assessed the activation of caspases, the inhibition of protein synthesis, the onset of apoptosis and the mechanism of PP50/saporin entry. Inhibition of protein synthesis and activation of caspases 3/7, 8 and 9 were found to occur before the onset of apoptosis and cell death. PP50/saporin was also shown to rely on micropinocytosis and caveolae-mediated endocytosis for cell entry. In addition, fluorescein isothiocyanate-labelled saporin (FITC-saporin) was localized within the cytoplasm and nuclei when delivered with Cyanine5-labelled PP50 (Cy5-PP50). Taken together, this suggests that multiple pathways are triggered to initiate apoptosis and cell death in cells treated with PP50/saporin. Therefore, these results make PP50 a potential intracellular delivery platform for the internalization of protein therapeutics.

A quaternary ammonium-based nanosystem enables delivery of CRISPR/Cas9 for cancer therapy.

Genome editing mediated by CRISPR/Cas9 is an attractive weapon for cancer therapy. However, in vivo delivery of CRISPR/Cas9 components to achieve therapeutic efficiency is still challenging. Herein, a quaternary ammonium-functionalized poly(L-lysine) and a cholesterol-modified PEG (QNP) were self-assembled with a negatively charged CRISPR Cas9/sgRNA ribonucleoprotein (RNP) to form a ternary complex (QNP/RNP). Such a delivery system of QNP exhibited multiplex genome editing capabilities in vitro (e.g., the GFP gene and the PLK1 gene). In addition, QNP/RNPPLK1 containing PLK1 sgRNA led to 30.99% of genome editing efficiency in MCF-7 cells with negligible cytotoxicity of the carrier. QNP/RNPPLK1, which was capable of simultaneously inhibiting cell proliferation, mediating cell cycle arrest and downregulating expression of PLK1, held great in vitro therapeutic efficiency. Moreover, QNP/RNPPLK1 exhibited outstanding accumulation in tumors and high biocompatibility in vivo. In an MCF-7 xenograft animal model, QNP/RNPPLK1 showed excellent anti-tumor efficacy and achieved 17.75% indels ratio. This work showcases the successful delivery of CRISPR Cas9/sgRNA RNP with enhanced genome editing efficiency and provides a potential on-demand strategy for cancer therapy.

Single-molecule force spectroscopy shows that side chain interactions govern the mechanochemical response of polypeptide α-helices and prevent the formation of β-sheets

AFM single-molecule experiments on poly(l-glutamic acid) and poly(l-lysine) show that hydrophobic side chain interactions stabilize α-helices and inhibit the formation of a metastable β-sheet-like structure under mechanical deformation.

Effects of Novel Dental Composites on Streptococcus mutans Biofilms.

With the phase-out of amalgam and the increase in minimally invasive dentistry, there is a growing need for high-strength composite materials that can kill residual bacteria and promote tooth remineralization. This study quantifies how antibacterial polylysine (PLS) and re-mineralizing monocalcium phosphate monohydrate (MCPM) affect Streptococcus mutans biofilms and the strength of dental composites. For antibacterial studies, the MCPM-PLS filler percentages were 0-0, 8-4, 12-6, and 16-8 wt% of the composite filler phase. Composite discs were immersed in 0.1% sucrose-supplemented broth containing Streptococcus mutans (UA159) and incubated in an anaerobic chamber for 48 h. Surface biomass was determined by crystal violet (CV) staining. Growth medium pH was measured at 24 and 48 h. Biofilm bacterial viability (CFU), exo-polysaccharide (water-soluble glucan (WSG) and water-insoluble glucan (WIG)), and extracellular DNA (eDNA) were quantified. This was by serial dilution plate counting, phenol-sulfuric acid microassay, and fluorometry, respectively. The biaxial flexural strengths were determined after water immersion for 1 week, 1 month, and 1 year. The MCPM-PLS wt% were 8-4, 8-8, 16-4 and 16-8. The normalized biomass, WSG, and WIG showed a linear decline of 66%, 64%, and 55%, respectively, as the PLS level increased up to 8%. The surrounding media pH (4.6) was all similar. A decrease in bacterial numbers with the 12-6 formula and a significant reduction with 16-8 compared to the 0-0 formulation was observed. The eDNA concentrations in biofilms formed on 12-6 and 16-8 formulations were significantly less than the 0-0 control and 8-4 formulations. Doubling MCPM and PLS caused a 14 and 19% reduction in strength in 1 week, respectively. Average results were lower at 1 month and 1 year but affected less upon doubling MCPM and PLS levels. Moreover, a 4% PLS may help to reduce total biomass and glucan levels in biofilms on the above composites. Higher levels are required to reduce eDNA and provide bactericidal action, but these can decrease early strength.

Effect of Polymer Gel Elasticity on Complex Coacervate Phase Behavior.

Gels are key materials in biological systems such as tissues and may control biocondensate formation and structure. To further understand the effects of elastic environments on biomacromolecular assembly, we have investigated the phase behavior and radii of complex coacervate droplets in polyacrylamide (PAM) networks as a function of gel modulus. Poly-l-lysine (PLL) and sodium hyaluronate (HA) complex coacervate phases were prepared in PAM gels with moduli varying from 0.035 to 15.0 kPa. The size of the complex coacervate droplets is reported from bright-field microscopy and confocal fluorescence microscopy. Overall, the complex coacervate droplet volume decreases inversely with the modulus. Fluorescence microscopy is also used to determine the phase behavior and concentration of fluorescently tagged HA in the complex coacervate phases as a function of ionic strength (100-270 mM). We find that the critical ionic strength and complex coacervate stability are nonmonotonic as a function of the network modulus and that the local gel concentration can be used to control phase behavior and complex coacervate droplet size scale. By understanding how elastic environments influence simple electrostatic assembly, we can further understand how biomacromolecules exist in complex, crowded, and elastic cellular environments.

Formulation and Biodegradation of Surface-Supported Biopolymer-Based Microgels Formed via Hard Templating onto Vaterite CaCO3 Crystals.

In recent decades, there has been increased attention to the role of layer-by-layer assembled bio-polymer 3D structures (capsules, beads, and microgels) for biomedical applications. Such free-standing multilayer structures are formed via hard templating onto sacrificial cores such as vaterite CaCO3 crystals. Immobilization of these structures onto solid surfaces (e.g., implants and catheters) opens the way for the formulation of advanced bio-coating with a patterned surface. However, the immobilization step is challenging. Multiple approaches based mainly on covalent binding have been developed to localize these multilayer 3D structures at the surface. This work reports a novel strategy to formulate multilayer surface-supported microgels (ss-MG) directly on the surface via hard templating onto ss-CaCO3 pre-grown onto the surface via the direct mixing of Na2CO3 and CaCl2 precursor solutions. ss-MGs were fabricated using biopolymers: polylysine (PLL) as polycation and three polyanions-hyaluronic acid (HA), heparin sulfate (HS), and alginate (ALG). ss-MG biodegradation was examined by employing the enzyme trypsin. Our studies indicate that the adhesion of the ss-MG to the surface and its formation yield directly correlate with the mobility of biopolymers in the ss-MG, which decreases in the sequence of ALG > HA > HS-based ss-MGs. The adhesion of HS-based ss-MGs is only possible via heating during their formation. Dextran-loading increases ss-MG formation yield while reducing ss-MG shrinking. ss-MGs with higher polymer mobility possess slower biodegradation rates, which is likely due to diffusion limitations for the enzyme in more compact annealed ss-MGs. These findings provide valuable insights into the mechanisms underlying the formation and biodegradation of surface-supported biopolymer structures.

Customized triphasic cartilage composite scaffold simulating hypoxic microenvironment for osteochondral regeneration

The regeneration of the osteochondral complex in situ presents a significant challenge. The inherent hypoxic microenvironment of cartilage plays a critical role in facilitating osteochondral repair. The successful regeneration of the osteochondral complex necessitates the utilization of materials and structures that closely mimic its composition. In this study, carboxymethyl chitosan (CCS), oxidized hyaluronic acid (OHA), and tannic acid (Ta) were employed to fabricate an injectable and self-healing hydrogel (Ta@gel). The incorporation of Ta within the hydrogel network enables preferential oxidation, thereby creating an anoxic microenvironment within the hydrogel. Bone marrow-derived mesenchymal stem cells (BMSCs) were encapsulated within microspheres composed of methacrylic anhydride gelatin (GelMA). These microspheres were subsequently loaded into a Ta@gel. The resulting bionic hydrogel composite was then combined with a three-dimensional (3D) printed hydroxyapatite (HAp) scaffold coated with poly-l-lysine (PLL). This combination resulted in the formation of a bionic three-layer composite structure (HAp@PLL + Ta@gel + GelMA@BMSCs) that closely resembles the complex composition and structure of natural osteochondral complex. The efficacy of this customized triphasic composite scaffold in promoting osteochondral complex regeneration has been demonstrated in vitro and in vivo. Consequently, this study provided a new sight for inducing the in situ regeneration of cartilage.

Design Parameters for a Mass Cytometry Detectable HaloTag Ligand.

Mass cytometry permits the high dimensional analysis of complex biological samples; however, some techniques are not yet integrated into the mass cytometry workflow due to reagent availability. The use of self-labeling protein systems, such as HaloTag, are one such application. Here, we describe the design and implementation of the first mass cytometry ligands for use with HaloTag. "Click"-amenable HaloTag warheads were first conjugated onto poly(l-lysine) or poly(acrylic acid) polymers that were then functionalized with diethylenetriaminepentaacetic acid (DTPA) lutetium metal chelates. Kinetic analysis of the HaloTag labeling rates demonstrated that the structure appended to the 1-chlorohexyl warhead was key to success. A construct with a diethylene glycol spacer appended to a benzamide gave similar rates (kobs ∼ 102 M-1 s-1), regardless of the nature of the polymer. Comparison of the polymer with a small molecule chelate having rapid HaloTag labeling kinetics (kobs ∼ 104 M-1 s-1) suggests the polymers significantly reduced the HaloTag labeling rate. HEK293T cells expressing surface-exposed GFP-HaloTag fusions were labeled with the polymeric constructs and 175Lu content measured by cytometry by time-of-flight (CyTOF). Robust labeling was observed; however, significant nonspecific binding of the constructs to cells was also present. Heavily pegylated polymers demonstrated that nonspecific binding could be reduced to allow cells bearing the HaloTag protein to be distinguished from nonexpressing cells.

Influence of Selected Factors on the Adsorption Layer Structure of Polyamino Acids and Their Block Copolymers at the Solid-Aqueous Solution Interface.

The adsorption mechanism of different polymers containing ionic polyamino acids monomers in the chain structure at the solid-liquid interface was investigated. Initially, the influence of molecular weight and solution pH on simple polyamino acids (poly(L-aspartic acid) and poly(L-lysine) binding was determined. Considering the obtained dependencies, the polymer adsorption layer conformation was proposed in the systems containing block copolymers (both diblock and symmetrical triblock) consisting of polypeptide as well as poly(ethylene glycol) fragments. The presented studies focused on the application of two experimental methods. The polymer adsorption was carried out using the batch method and the adsorbate concentration was determined spectrophotometrically. Then, the turbidimetric measurements were taken. The analysis of the obtained results showed that the adsorption process of block copolymers depends on two factors. Firstly, the solution pH determines both the nature of the interactions of the copolymer structural units with the solid surface and the conformation of the polypeptide chains. The second parameter influencing the adsorption layer structure is the ratio of the lengths of both blocks. Introducing a short PEG fragment into the polymer main chain may improve the polymer adsorption properties by increasing the number of interactions with the adsorbent surface.

Ultralow Energy Consumption Angstrom-Fluidic Memristor.

The emergence of nanofluidic memristors has made a giant leap to mimic the neuromorphic functions of biological neurons. Here, we report neuromorphic signaling using Angstrom-scale funnel-shaped channels with poly-l-lysine (PLL) assembled at nano-openings. We found frequency-dependent current-voltage characteristics under sweeping voltage, which represents a diode in low frequencies, but it showed pinched current hysteresis as frequency increases. The current hysteresis is strongly dependent on pH values but weakly dependent on salt concentration. We attributed the current hysteresis to the entropy barrier of PLL molecules entering and exiting the Angstrom channels, resulting in reversible voltage-gated open-close state transitions. We successfully emulated the synaptic adaptation of Hebbian learning using voltage spikes and obtained a minimum energy consumption of 2-23 fJ in each spike per channel. Our findings pave a new way to mimic neuronal functions by Angstrom channels in low energy consumption.

Antimicrobial peptide dendrimers assisted Nanocomposite-Loaded lyotropic liquid crystalline for multimodal surgical site infection management

Superficial incisional surgical site infections (SISSIs) were a serious challenge leading to delayed wound healing and even systemic diseases. The high incidence of antibiotic resistance and unprotected wound lesions severely hindered the current therapeutical efficiency. In this study, an antibacterial nanocomposite PAMAM-PLL@AuNPs was designed to avoid antibiotic resistance, and a lyotropic liquid crystal system was used for local drug delivery and protecting lesions. The PAMAM-PLL was constructed with polyamide amine (PAMAM) as the core and polylysine (PLL) as the branch chain, which increased the antibacterial activity by 4 times. After being connected to gold nanoparticles (AuNPs), a further 2 times antibacterial activity improvement was achieved. PAMAM-PLL@AuNPs could eliminate bacteria by multimodal mechanisms, including causing leakage of intracellular substances, inducing intracellular reactive oxygen species and inhibiting bacterial metabolism. Thanks to their spontaneous phase transition and the mechanical response characteristics of the lattice structure, lyotropic liquid crystal with self-healing characteristics was employed to load PAMAM-PLL@AuNPs. The unique structure facilitated buffering external forces and accelerated wound healing. The excellent antibacterial and wound healing properties of the lyotropic liquid crystal drug delivery system were confirmed by a surgical incision infection model. This study is expected to provide a robust strategy for the treatment of SISSIs.

Magnetic Polymer Microcarriers for Cell Engineering Applications with Enzyme‐Free Cell Harvesting and Rapid Recovery in Large‐Scale Cell Culture

AbstractStimulus‐responsive large‐scale cell culture microcarriers are promising biological materials for large‐scale cell production. Herein, multifunctional thermal and magnetic microcarriers (TMMs) made of poly(N‐isopropylacrylamide) (PNIPAM), polylysines (PLLs), gelatin methacryloyl (GelMA), poly(ethylene glycol) diacrylate (PEGDA), N,N‐methylenebis(acrylamide) (MBA), Fe3O4 and SiO2 are prepared to achieve large‐scale enzyme‐free cell harvesting and also can be used as cells stereogrowth scaffold to mimic cells suspension state to develop novel application, such as recombinant proteins produced. In TMMs, NIPAM and other materials are mixed and then underwent in situ radical polymerization by UV irradition with 2‐hydroxy‐2‐methylpropiophenone as initiator, in which GelMA provides cell adhesion sites and PLLs enable a positive microenvironment with SiO2 as filler. As enzyme‐free cell microcarriers, cell harvesting from TMMs by PNIPAM are achieved at 25 °C through vortex oscillation within 15 min and TMMs can be recycled at least for four times by magnetic recovery. Moreover, TMMs can be used as stereoculture scaffold to let cells in suspension as adherent state to improve gene transfection efficiency. Combined with magnetothermal effect, TMMs can further improve gene transfer to obtain industrialization of proteins expression. Therefore, TMMs are potential for the development of cell manufacturing and the expansion of cell stereogrowth application for recombinant proteins production.

Electrochemiluminescence Sensor Based on CTS-MoS2 and AB@CTS with Functionalized Luminol for Detection of Malathion Pesticide Residues.

The accumulation of pesticide residues poses a significant threat to the health of people and the surrounding ecological systems. However, traditional methods are not only costly but require expertise in analysis. An electrochemiluminescence (ECL) aptasensor was developed using chitosan and molybdenum disulfide (CTS-MoS2), along with acetylene black (AB@CTS) for the rapid detection of malathion residues. Due to the weak interaction force, simple composite may lead to uneven dispersion; MoS2 and AB were dissolved in CTS solution, respectively, and utilized the biocompatibility of CTS to interact with each other on the electrode. The MoS2 nanosheets provided a large specific surface area, enhancing the utilization rate of catalytic materials, while AB exhibited excellent conductivity. Additionally, the dendritic polylysine (PLL) contained numerous amino groups to load abundant luminol to catalyze hydrogen peroxide (H2O2) and generate reactive oxygen species (ROS). The proposed ECL aptasensor obtained a low detection limit of 2.75 × 10-3 ng/mL (S/N = 3) with a good detection range from 1.0 × 10-2 ng/mL to 1.0 × 103 ng/mL, demonstrating excellent specificity, repeatability, and stability. Moreover, the ECL aptasensor was successfully applied for detecting malathion pesticide residues in authentic samples with recovery rates ranging from 94.21% to 99.63% (RSD < 2.52%). This work offers valuable insights for advancing ECL sensor technology in future applications.

The effect of osteoprotegerin nanocomplex on osteoprotegerin and arteriosclerosis in mice

Osteoprotegerin (OPG), as one of the tumor necrosis factor receptors, is believed to be related with Osteoprotegerin (OP) and arteriosclerosis (AS). This study aims to explore the effect of OPG on osteoblasts (OB) and AS. The nanocomplex Poly(ethylene glycol)-Poly(L-Lysine)-Osteoprotegerin (PPO) was prepared by introducing OPG plasmid to Poly(ethylene glycol)-Poly(L-Lysine). Healthy group, AS group, AS combined with OP group were designed to measure apoptosis, activity, adhesion, and calcification of OB in Polycaprolactone (PCL) by flow cytometry, MTT method, alizarin red staining, scanning electron microscope and other methods. The effect of PPO on bone mineral density and arteriosclerosis of ApoE−/−/RANKL+/+ mice was observed. Bone Mineral Density (BMD) was positively correlated with ABI while negatively correlated with pulse wave velocity. OPG in AS combined with OP group was higher than healthy group, and AS group was also higher than healthy group. PPO-administered mice had dense bone trabeculae and higher bone density while the control group was the opposite. The effect of PPO on the stable expression of OPG in mice reduced the plaque area and the degree of vascular calcification. PPO can enhance OB activity in vitro, inhibit cell apoptosis, promote cell calcification and PCL adhesion, decrease the area of atherosclerotic plaque and calcification, and increase the BMD of the femoral neck. PPO can promote the adhesion and calcification of MC3T3-E1 on PCL, which is of great significance for maintaining sufficient bone strength and reducing blood calcium. In addition, PPO compound drugs can increase bone density, reduce arterial plaque area and vascular calcification.