poly-L-lactic Acid Plate Research Articles

Biomechanical Comparison of Titanium and Poly- L -Lactic Acid Trapezoidal Plates Applied in a Subcondylar Fracture Model.

Different types of plates are used in clinical practice for the management of subcondylar fractures. This study aimed to compare the performance of poly- L -lactic acid (PLLA) and titanium trapezoidal plates in the fixation of subcondylar mandibular fractures using finite element analysis. Titanium and PLLA trapezoidal plates and screws were placed on the virtual model obtained from computed tomography images of a patient with a subcondylar fracture to perform finite element analysis. The analysis included maximum tension distribution, maximum principal strain, displacement, and deformation of the bone, plates, and screws. The maximum tension distribution and maximum principal stress were found to be significantly higher on the titanium plate than on the PLLA plate and screws. Almost no difference was found between the trapezoidal and PLLA plates regarding the displacement of the fracture fragments at the fracture line. No difference was recorded regarding the displacement of the PLLA and titanium screws. The values of maximal principal strain between the PLLA and titanium materials showed no significant difference. The trapezoidal PLLA plates can be an alternative to trapezoidal titanium plates due to their functional stability and rigidity.

Changes in the computed tomography (pixel) value of mandibular ramus bone and fixation screws after sagittal split ramus osteotomy

The purpose of this retrospective study was to evaluate the changes in computed tomography (CT) values of ramus bone and screws after sagittal split ramus osteotomy (SSRO) setback surgery. The subjects were 64 patients (128 sides) who underwent bilateral SSRO setback surgery. They were divided into six groups according to the fixation plate type used and the use or not of self-setting α-tricalcium phosphate (Biopex): group 1: titanium plate and screws; group 2: titanium plate and screws with Biopex; group 3: poly-l-lactic acid (PLLA) plate and screws; group 4: PLLA plate and screws with Biopex; group 5: uncalcined and unsintered hydroxyapatite particles and poly-l-lactic acid (uHA/PLLA) plate and screws; group 6: PLLA/uHA plate and screws with Biopex. CT values (pixel values) of the lateral cortex, medial cortex, osteotomy site, and screws were measured preoperatively, immediately after surgery, and 1 year postoperatively using horizontal CT images at the mandibular foramen taken parallel to the Frankfort horizontal plane. There were significant differences in the time-course change of pixel values for the lateral cortex (P<0.0001) and the osteotomy site (P<0.0001) among the six groups. This study suggests that the fixation plate type and use of bone alternative material may affect bone quality during the process of bone healing after SSRO.

Biomechanical analysis of poly‐L‐lactic acid and titanium plates fixated for mandibular symphyseal fracture with a conservatively treated unilateral condylar fracture using the three‐dimensional finite element method

The purpose of this study was to investigate stress on poly-L-lactic acid (PLLA) plates with a thickness of 1.4 mm and titanium plates with a thickness of 1.0 and 1.4 mm placed for mandibular symphyseal fractures with or without conservatively treated, unilateral condylar fractures using finite element analysis. The symphyseal fracture region was defined by the following three conditions: the defect, the callus, and the contact condition. Stress on the plates was analyzed by an applying occlusal force of 478.1 N on the first molar of the non-condylar fracture side. In the model of isolated symphyseal fracture, the maximal stresses were below the material strength in all plate types and conditions. In the models with condylar fracture, the maximal stresses on these plates were much higher than those in the models of isolated symphyseal fracture, especially for the defect condition. Although the maximal stresses on all types of plates in the contact condition were below the material strengths, some of those in the defect condition were higher than these strengths. These results suggest that a PLLA plate can theoretically withstand stress under good reductions of symphyseal fractures, even for condylar fractures; however, both the PLLA plate and titanium miniplate may be at risk of fracture under poor reduction.

Maxillary stability after Le Fort I osteotomy using three different plate systems

The purpose of this study was to compare postoperative changes in maxillary stability after Le Fort I osteotomy in three groups: with an unsintered hydroxyapatite (u-HA)/poly-l-lactic acid (PLLA) plate; a PLLA plate; and a titanium plate. Subjects comprised 60 Japanese patients diagnosed with mandibular prognathism. All patients underwent Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. All patients were randomized in groups of 20 to a u-HA/PLLA group, a PLLA plate group and a titanium plate group. Changes in postoperative time intervals between the plate groups were compared using lateral and posteroanterior cephalography. The uHA/PLLA group had significantly larger values than the PLLA group regarding change of mx1-S perpendicular to SN between 3 and 12 months (T3) (P=0.0269). The uHA/PLLA group had a significantly larger value than the PLLA group regarding change of S–A perpendicular to SN between baseline and 1 month (T1) (P=0.0257). There was no significant difference in the other measurements. This study suggests that maxillary stability with satisfactory results could be obtained in the u-HA/PLLA, PLLA plate and titanium plate groups, although there was a slight difference between the u-HA/PLLA and PLLA plate systems in Le Fort I osteotomy.

Skeletal Stability After Mandibular Setback Surgery: Comparisons Among Unsintered Hydroxyapatite/Poly-L-Lactic Acid Plate, Poly-L-Lactic Acid Plate, and Titanium Plate

The purpose of this study is to compare the time-course changes in condylar long-axis and skeletal stability after sagittal split ramus osteotomy (SSRO) with an unsintered hydroxyapatite (u-HA)/poly-L-lactic acid (PLLA) plate, PLLA plate, or titanium plate. Of 60 Japanese patients diagnosed with mandibular prognathism, 20 underwent SSRO with a u-HA/PLLA plate system, 20 underwent SSRO with a PLLA plate system, and 20 underwent SSRO with a conventional titanium plate system. The time-course changes in condylar long-axis and skeletal stability were assessed by use of axial, frontal, and lateral cephalograms. Compared with the u-HA/PLLA group, the titanium group showed a significantly greater change in the right condyle angle between initially and 1 month (P = .0105) and intercondylar axes angle between 1 and 3 months (P = .0013). The PLLA group showed a significantly greater change than the titanium group (P = .0043) and u-HA/PLLA group (P = .0002) in terms of ramus inclination between 1 and 3 months; however, there were no significant differences among the 3 groups in the other measurements for each time interval. This study suggests that there are no significant differences in postoperative time-course changes among a u-HA/PLLA plate system, PLLA plate system, and conventional titanium plate system.

O.415 Stability of counterclockwise mandibular advancement

This study was designed to assess skeletal stability after bilateral sagittal split ramus osteotomy (BSSO) and fixation with a poly-l-lactic acid (PLLA) plate, as compared to that after BSSO and fixation with a titanium plate, and to analyze the change in the condylar long axis after these procedures. The study group comprised 40 patients who had mandibular prognathism (20, titanium group; 20, PLLA group). The groups were randomized to show similar distributions of preoperative SNB. All patients underwent BSSO setback by the Obwegeser method. Fixation was done with bent titanium plates or bent PLLA plates, applied in a similar manner. Lateral, frontal, and submental–vertical cephalograms were analyzed preoperatively and postoperatively. The maximum mouth opening range and the incidence of temporomandibular disorders were also evaluated. There was no significant difference in the right condylar angle or width between the two groups, but the left condylar angle and width, gonial angle, and ramus inclination differed significantly between them (P < 0.05). SNA, SNB, and ANB were similar in both groups. There was no significant difference between the groups in maximum mouth opening range or temporomandibular disorders. We conclude that the change in condylar angle after BSSO and fixation with a titanium plate is greater than that after BSSO and fixation with a PLLA plate, but skeletal stability related to the occlusion is similar for the two procedures.

O.424 Treatment of post-cleft deformations of the facial skeleton

This study was designed to assess skeletal stability after bilateral sagittal split ramus osteotomy (BSSO) and fixation with a poly-l-lactic acid (PLLA) plate, as compared to that after BSSO and fixation with a titanium plate, and to analyze the change in the condylar long axis after these procedures. The study group comprised 40 patients who had mandibular prognathism (20, titanium group; 20, PLLA group). The groups were randomized to show similar distributions of preoperative SNB. All patients underwent BSSO setback by the Obwegeser method. Fixation was done with bent titanium plates or bent PLLA plates, applied in a similar manner. Lateral, frontal, and submental–vertical cephalograms were analyzed preoperatively and postoperatively. The maximum mouth opening range and the incidence of temporomandibular disorders were also evaluated. There was no significant difference in the right condylar angle or width between the two groups, but the left condylar angle and width, gonial angle, and ramus inclination differed significantly between them (P < 0.05). SNA, SNB, and ANB were similar in both groups. There was no significant difference between the groups in maximum mouth opening range or temporomandibular disorders. We conclude that the change in condylar angle after BSSO and fixation with a titanium plate is greater than that after BSSO and fixation with a PLLA plate, but skeletal stability related to the occlusion is similar for the two procedures.

A mouse strain difference in tumorigenesis induced by biodegradable polymers

The use of poly-L-lactic acid (PLLA) surgical implants for repair of bone fractures has gained popularity in the past decade. The aim of this study was to evaluate the in vivo effect of PLLA plates on subcutaneous tissue in two mouse strains, BALB/cJ and SJL/J, which have higher and lower tumorigenicity, respectively. Gap-junctional intercellular communication and protein expression of connexin 43 were significantly suppressed, whereas secretion of transforming growth factor-beta1 and expression of extracellular matrix, insulin-like growth factor binding protein 3, and cysteine-rich intestinal protein 2 were significantly increased in PLLA-implanted BALB/cJ mice when compared with BALB/cJ controls. Finally, tumors were formed after implantation of cultured cells from the more-tumorigenic BALB/cJ, but not SJL/J, mice into nude mice.

Maxillary Stability Following Le Fort I Osteotomy in Combination With Sagittal Split Ramus Osteotomy and Intraoral Vertical Ramus Osteotomy: A Comparative Study Between Titanium Miniplate and Poly- l-Lactic Acid Plate

The purpose of this study was to compare changes in maxillary stability after Le Fort I osteotomy with titanium miniplate and poly-L-lactic acid (PLLA) plate (Fixsorb-MX; Takiron Co, Osaka, Japan). The subjects were composed of 47 Japanese patients with diagnosed jaw deformity: 24 underwent Le Fort I osteotomy and sagittal split ramus osteotomy (SSRO); and 23 underwent Le Fort I osteotomy intraoral vertical ramus osteotomy without internal fixation. Each group was divided into titanium plate and PLLA plate groups. Time course changes between plate groups were compared using lateral and posteroanterior cephalography. Significant differences were identified between titanium plate and PLLA plate groups in A point after Le Fort I osteotomy and SSRO (P < .05). Significant differences existed between titanium plate and PLLA plate groups in vertical component of posterior nasal spine after Le Fort I osteotomy in both combinations with SSRO and intraoral vertical ramus osteotomy (P < .05). However, no significant differences were identified in measurements on posteroanterior cephalography. These results suggest a slight tendency for vertical impaction after Le Fort I osteotomy both in combination with SSRO and intraoral vertical ramus osteotomy with PLLA plates, although differences in time course changes were not clinically apparent, and normal occlusion was established in all patients.

Changes in condylar long axis and skeletal stability after bilateral sagittal split ramus osteotomy with poly- l-lactic acid or titanium plate fixation

This study was designed to assess skeletal stability after bilateral sagittal split ramus osteotomy (BSSO) and fixation with a poly- l-lactic acid (PLLA) plate, as compared to that after BSSO and fixation with a titanium plate, and to analyze the change in the condylar long axis after these procedures. The study group comprised 40 patients who had mandibular prognathism (20, titanium group; 20, PLLA group). The groups were randomized to show similar distributions of preoperative SNB. All patients underwent BSSO setback by the Obwegeser method. Fixation was done with bent titanium plates or bent PLLA plates, applied in a similar manner. Lateral, frontal, and submental–vertical cephalograms were analyzed preoperatively and postoperatively. The maximum mouth opening range and the incidence of temporomandibular disorders were also evaluated. There was no significant difference in the right condylar angle or width between the two groups, but the left condylar angle and width, gonial angle, and ramus inclination differed significantly between them ( P < 0.05). SNA, SNB, and ANB were similar in both groups. There was no significant difference between the groups in maximum mouth opening range or temporomandibular disorders. We conclude that the change in condylar angle after BSSO and fixation with a titanium plate is greater than that after BSSO and fixation with a PLLA plate, but skeletal stability related to the occlusion is similar for the two procedures.

Optical rotatory power of biodegradable polylactic acid films

AbstractPolylactic acid (PLA) is a polymer material on which biodegradability research has been the most advanced. PLA is a chiral polymer in which molecules containing asymmetric carbon atoms have a helical structure. Two optical isomers of PLA exist, PLLA (poly(L‐lactic acid)) and PDLA (poly(D‐lactic acid)). In this study, using various physical processes, we fabricated various samples such as oriented PLLA film, PLLA fiber, rolled PLLA film and forged PLLA plate. We observed a large optical rotatory power ρ in the cylindrical plate fabricated using a forging process. ρ of forged PLLA plates is 7200°/mm which is approximately 300 times larger than that of α‐quartz.

Parascapular free flap for mandibular reconstruction

This study was designed to assess skeletal stability after bilateral sagittal split ramus osteotomy (BSSO) and fixation with a poly-l-lactic acid (PLLA) plate, as compared to that after BSSO and fixation with a titanium plate, and to analyze the change in the condylar long axis after these procedures. The study group comprised 40 patients who had mandibular prognathism (20, titanium group; 20, PLLA group). The groups were randomized to show similar distributions of preoperative SNB. All patients underwent BSSO setback by the Obwegeser method. Fixation was done with bent titanium plates or bent PLLA plates, applied in a similar manner. Lateral, frontal, and submental–vertical cephalograms were analyzed preoperatively and postoperatively. The maximum mouth opening range and the incidence of temporomandibular disorders were also evaluated. There was no significant difference in the right condylar angle or width between the two groups, but the left condylar angle and width, gonial angle, and ramus inclination differed significantly between them (P < 0.05). SNA, SNB, and ANB were similar in both groups. There was no significant difference between the groups in maximum mouth opening range or temporomandibular disorders. We conclude that the change in condylar angle after BSSO and fixation with a titanium plate is greater than that after BSSO and fixation with a PLLA plate, but skeletal stability related to the occlusion is similar for the two procedures.