Poly(ethylene Glycol) Diacrylate Research Articles

3D bioprinting of adhesive, anti-bacterial alginate/polyacrylamide-based customized boluses using digital light processing for radiotherapy applications

Boluses are a type of materials used to enhance skin dose during the treatment of superficial lesions. However, the current commercially available boluses cannot fully conform to irregular skin surfaces due to their uniform thickness, thereby compromising the efficacy of radiotherapy. Three-dimensional (3D) bioprinting boasts a huge potential in the creation of customized boluses, but the use of this technique is limited by shortcomings of the prevailing materials, such as their indirect printability and substance rigidity. As a potential substitute, hydrogels possessing a tensile modulus comparable to that of skin tissue are optimal candidates for customizing boluses. In this study, we developed a photocurable bioink for multifunctional boluses using digital light processing (DLP). Alginate, acrylamide, polyethylene glycol diacrylate, lithium phenyl-2,4,6-trimethylbenzoylphosphinate, and protocatechuic acid were synergistically combined to fabricate the bioink. The bolus printed using this bioink was endowed with enhanced toughness, superior adhesion, tissue equivalence, anti-dehydration and anti-bacterial properties, as well as excellent biocompatibility and radiation performance. In conclusion, the DLP-based 3D bioprinting of the proposed bioink can provide an avenue for obtaining personalized boluses in radiotherapy treatment of superficial tumors.

Fabrication of Soft Transparent Patient-Specific Vascular Models with Stereolithographic 3D printing and Thiol-Based Photopolymerizable Coatings.

An ideal vascular phantom should be anatomically accurate, have mechanical properties as close as possible to the tissue, and be sufficiently transparent for ease of visualization. However, materials that enable the convergence of these characteristics have remained elusive. The fabrication of patient-specific vascular phantoms with high anatomical fidelity, optical transparency, and mechanical properties close to those of vascular tissue is reported. These final properties are achieved by 3D printing patient-specific vascular models with commercial elastomeric acrylic-based resins before coating them with thiol-based photopolymerizable resins. Ternary thiol-ene-acrylate chemistry is found optimal. A PETMP/allyl glycerol ether (AGE)/polyethylene glycol diacrylate (PEGDA) coating with a 30/70% AGE/PEGDA ratio applied on a flexible resin yielded elastic modulus, UTS, and elongation of 3.41MPa, 1.76 MPa, and 63.2%, respectively, in range with the human aortic wall. The PETMP/AGE/PEGDA coating doubled the optical transmission from 40% to 80%, approaching 88% of the benchmark silicone-based elastomer. Higher transparency correlates with a decrease in surface roughness from 2000 to 90nm after coating. Coated 3D-printed anatomical replicas are showcased for pre-procedural planning and medical training with good radio-opacity and echogenicity. Thiol-click chemistry coatings, as a surface treatment for elastomeric stereolithographic 3D-printed objects, address inherent limitations of photopolymer-based additive manufacturing.

On-Demand Tunable Electrical Conductance Anisotropy in a MOF-Polymer Composite.

Property optimization through orientation control of metal-organic framework (MOF) crystals that exhibit anisotropic crystal structures continues to garner tremendous interest. Herein, an electric field is utilized to post-synthetically control the orientation of conductive layered Cu3(HHTP)2 (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene) crystals dispersed in an electronically insulating poly(ethylene glycol) diacrylate (PEGDA) oligomer matrix. Optical and electrical measurements areperformed to investigate the impact of the electric field on the alignment of Cu3(HHTP)2 crystals and the formation of aggregated microstructures, which leads to an ≈5000-fold increase in the conductivity of the composite. Notably, the composite thin-films containing aligned Cu3(HHTP)2 crystals exhibit significant conductivity of ≈10-3Scm-1 despite the low concentration (≈1wt.%) of conductive Cu3(HHTP)2. The use of an electric field to align Cu3(HHTP)2 crystals can rapidly generate various desired patterns that exhibit on-demand tunable collective charge transport anisotropy. The findings provide valuable insights toward the manipulation and utilization of conductive MOFs with anisotropic crystal structures for various applications such as adhesive electrical interconnects and microelectronics.

In-situ copolymerization Ion-Gel-based flexible sensor for wearable dimethyl methylphosphonate detection

Flexible electronics have been extensively investigated in recent years due to their convenient and wearable properties. Considering the practical applications in the external environment, the demand for portable and miniaturized sensing systems is prominent, for example, detecting harmful and toxic gases. Flexible sensors provide a potential novel solution for achieving the above goals, which is wearable sensing. In this paper, we develop a flexible sensor based on the ionic gel (Ion-Gel) for the detection of dimethyl methylphosphonate (DMMP). DMMP is a kind of organophosphorus gas, which may cause pollution to the environment and harm to biology. The Ion-Gel sensitive film is prepared through in-situ copolymerization of the polymer monomer poly(ethylene glycol) diacrylate (PEGDA), ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMIM-TFSI) and gas-sensing group hexafluoroisopropyl alcohol (HFIPA) under 365 nm ultraviolet light. The sensitive film can be patterned through a shadow mask on the interdigital electrodes ultimately. The sensor exhibits good sensitivity to the DMMP, with a lower limit of detection reaching 100 ppb under room temperature. Noteworthily, the sensor’s detecting upper limit is successfully extended to high gas concentrations at 800 ppm and maintains good linearity. A flexible print board circuit (FPCB) front-end is developed for the flexible DMMP sensor to construct a wearable platform that can be attached to the hand to achieve real-time detection. When the alarm threshold is set to 2 ppm DMMP, the proposed wearable detection platform can successfully give an alarm signal within 15 s

ECM-based bioadhesive hydrogel for sutureless repair of deep anterior corneal defects.

Corneal transplantation is the gold standard treatment for corneal-related blindness; however, this strategy faces challenges such as limited donor cornea, graft rejection, suture-related complications, and the need for specialized equipment and advanced surgical skills. Development of tissue adhesives for corneal regeneration is of great clinical value. However, currently available corneal tissue sealants pose challenges, such as lack of safety, biocompatibility, and desired mechanical properties. To meet these requirements simultaneously, a bovine stromal corneal extracellular matrix (dCor) was used to design a bioadhesive photocurable hydrogel based on gelatin methacrylate (GelMA) and polyethylene glycol diacrylate (PEGDA) hydrogels (dCor/Gel-PEG). Integration of dCor into the dual networks of GelMA and PEGDA (Gel-PEG) led to a bioadhesive hydrogel for curing corneal defects, which could be crosslinked by Irgacure 2959 within 5 min ultraviolet irradiation. The viability of corneal stromal stem cells (CSSCs) was improved on the dCor/Gel-PEG hydrogel in comparison to the Gel-PEG hydrogel. The gene expression profile supported the keratocyte differentiation of CSSCs seeded on dCor/Gel-PEG via increased KERA and ALDH, with inhibited myofibroblast transdifferentiation via decreased α-SMA due to the presence of dCor. Interestingly, the dCor/Gel-PEG hydrogel exhibited favorable mechanical performance in terms of elasticity and bioadherence to the host corneal stroma. Ex vivo and in vivo examinations proved the feasibility of this hydrogel for the sutureless reconstruction of deep anterior corneal defects with promising histopathological results.

Selectively cross-linked hydrogel-based cocktail drug delivery micro-chip for colon cancer combinatorial drug screening using AI-CSR platform for precision medicine.

Cancer, ranked as the second leading cause of global mortality with a prevalence of 1 in 6 deaths, necessitates innovative approaches for effective treatment. Combinatorial drug therapy for cancer treatment targets several key pathways simultaneously and potentially enhances anti-cancer efficacy without intolerable side effects. However, it demands precise and accurate control of drug-dose combinations and their release. In this study, we demonstrated a selectively cross-linked hydrogel-based platform that can quantify and release drugs simultaneously for in-parallel cocktail drug screening. PDMS was used as the flow channel substrate and the poly (ethylene glycol) diacrylate (PEGDA) hydrogel array was formed by UV exposure using the photomask. Employing our platform, cocktails of anticancer drugs are precisely loaded and simultaneously released in-parallel into HCT-116 colon cancer cells, facilitating combinatorial drug screening. The integration of an artificial intelligence-based complex system response (AI-CSR) platform successfully identifies optimal drug-dose combinations from a pool of ten approved drugs. Notably, our cocktail drug chip demonstrates exceptional efficiency, screening 155 drug-dose combinations within a brief two and a half hours, a marked improvement over traditional methods. Furthermore, the device exhibits low drug consumption, requiring a mere 1 μL per patch of chip. Thus, our developed PDMS drug-loaded hydrogel platform presents a novel and expedited approach to quantifying drug concentrations, promising to be a faster, efficient and more precise approach for conducting cocktail drug screening experiments.

A hydrogel optical fibre sensor for rapid on-site ethanol determination.

Ethanol plays a critical role in the modern chemical industry, food production, and medical research. Given its wide applications, the detection of ethanol concentration is very necessary. In this paper, a fibre device for rapid ethanol detection is proposed. The sensing head was fabricated with multimode fibre. The hydrogel was photo-cured on the fibre tip from polyethylene glycol diacrylate (PEGDA). In the hydrogel, rhodamine 6G (R6G) was immobilized as the fluorescent indicator. The sensor was designed based on the swelling behaviour of the hydrogel in liquid. The transparency of the hydrogel was modulated by the component of the water-ethanol mixture, thus, the fluorescence intensity of R6G was monitored for the determination of ethanol. Within the range of 0-62.2 vol%, the detection limit (LOD) was 0.4 vol%. A detailed comparison with other detection methods showed that the proposed sensor has the advantages of being single-ended, low LOD, cost-effective, and easy to prepare. It has great potential for on-site ethanol detection applications.

Nanoarchitectonics of Injectable Biomimetic Conjugates for Cartilage Protection and Therapy Based on Degenerative Osteoarthritis Progression.

Osteoarthritis (OA) is a common age-related degenerative disease characterized by changes in the local tissue environment as inflammation progresses. Inspired by the wind-dispersal mechanism of dandelion seeds, this study develops responsive biomimetic microsphere-drug conjugate for OA therapy and protection. The conjugate integrates dibenzaldehyde polyethylene glycol (DFPEG) with chitosan and polyethylene glycol diacrylate (PEGDA) through dynamic covalent bonds to form a dual-network hydrogel microsphere. Based on the progression of OA, the conjugate with the surface-anchored cyclic peptide cortistatin-14 (CST-14) achieves targeted drug therapy and a self-regulating hydrogel network. In cases of progressing inflammation (pH < 5), CST-14 dissociates from the microsphere surface (viz. the drug release rate increased) and inhibits TNF-α signaling to suppress OA. Concurrently, the monomer DFPEG responsively detaches from the hydrogel network and scavenges reactive oxygen species (ROS) to protect the cartilage tissue. The ROS scavenging of DFPEG is comparable to that of coenzyme Q10 and vitamin C. The degraded PEGDA microspheres provide tissue lubrication through reused conjugates. The rat OA model successfully achieved a synergistic therapeutic effect greater than the additive effect (1 + 1 > 2). This strategy offers an approach for anchoring amine-containing drugs and has marked potential for OA treatment and protection.

A tough and piezoelectric poly(acrylamide/N,N-dimethylacrylamide) hydrogel-based flexible wearable sensor.

A flexible, tough, highly transparent and piezoelectric polyacrylamide hydrogel was fabricated induced by blue light photocuring, with camphorquinone/diphenyliodonium hexafluorophosphate (CQ/DPI) as the blue light initiator, acrylamide (AM) and N,N-dimethylacrylamide (DMAA) as monomers, polyethylene glycol diacrylate (PEGDA) as the crosslinker, lecithin as the dispersant, and BaTiO3 as the piezoelectric material. Various performance tests were carried out on the hydrogel, and the results showed that lecithin enhances the dispersion of BaTiO3 within the system and improves the tensile properties (>100% strain) of the hydrogel, and the addition of PEGDA not only improves the photopolymerization performance of the hydrogel, but also significantly improves its fracture strength (∼0.3 MPa). In addition, BaTiO3 enables the resultant hydrogels to show excellent conductivity (>1.5) and stable response to strain. The assembled hydrogel sensor shows a sensitive response to human joint activities, which is expected to be applied in self-powered sensors and energy collection.

Highly porous hydrogels for efficient solar water evaporation.

Solar energy is a plentiful renewable resource on Earth, with versatile applications in both domestic and industrial settings, particularly in solar steam generation (SSG). However, current SSG processes encounter challenges such as low efficiency and the requirement for extremely high concentrations of solar irradiation. Interfacial evaporation technology has emerged as a solution to these issues, offering improved solar performance compared to conventional SSG processes. Nonetheless, its implementation introduces additional complexities and costs to system construction. In this study, we present the development of hydrophilic, three-dimensional network-structured hydrogels with high porosity and swelling ratio using a facile fabrication technique. We systematically varied the mixing ratios of four key ingredients (polyethylene glycol diacrylate, PEGDA; polyethylene glycol methyl-ether acrylate, PEGMA; phosphate-buffered saline, PBS; and 2-hydroxy-2-methylpropiophenone, PI) to control the mean pore size and swelling ratio of the hydrogel. Additionally, plasmonic gold nanoparticles were incorporated into the hydrogel using a novel methodology to enhance solar light absorption and subsequent evaporation efficiency. The resulting material exhibited a remarkable solar efficiency of 77% and an evaporation rate of 1.6 kg m-2 h-1 under standard solar illumination (one sun), comparable to those of state-of-the-art SSG devices. This high efficiency can be attributed to the synergistic effects of the hydrogel's unique composition and nanoparticle concentration. These findings offer a promising avenue for the development of highly efficient solar-powered evaporation applications.

Electrospun Fibers for Use in Implantable Materials to Support Cell Therapy.

Hydrogels are a class of biomaterials that can provide a three-dimensional (3D) environment capable of mimicking the extracellular matrix of native tissues. In this chapter, we present a method to generate electrospun nanofibers for the purpose of reinforcing hydrogels. The addition of electrospun fibers can be used to improve the mechanical properties of hydrogels and broaden their range of applications. First, the polymer for making the electrospun fibers is formulated using chloroform/ethanol, polycaprolactone (PCL), polyethylene glycol (PEG), and polyethylene glycol diacrylate (PEGDA). Second, the polymer is used to generate thin electrospun nanofibers by an electrospinning technique using aluminum foil as a collector, which acts as the conductive substrate that collects the charged fibers. Third, the resulting electrospun fibers undergo a filtration process using nylon membrane filters, followed by lyophilization, ensuring complete removal of water from the sample.

Ion effects on minimally hydrated polymers: hydrogen bond populations and dynamics.

Compared to bulk water, the effect of ions in confined environments or heterogeneous aqueous solutions is less understood. In this study, we characterize the influence of ions on hydrogen bond populations and dynamics within minimally hydrated polyethylene glycol diacrylate (PEGDA) solutions using Fourier-transform infrared (FTIR) and two-dimensional infrared (2D IR) spectroscopies. We demonstrate that hydrogen bond populations and lifetimes are directly related to ion size and hydration levels within the polymer matrix. Specifically, larger monovalent cation sizes (Li+, Na+, K+) as well as anion sizes (F-, Cl-, Br-) increase hydrogen bond populations and accelerate hydrogen bond dynamics, with anions having more pronounced effects compared to cations. These effects can be attributed to the complex interplay between ion hydration shells and the polymer matrix, where larger ions with diffuse charge distributions are less efficiently solvated, leading to a more pronounced disruption of the local hydrogen bonding network. Additionally, increased overall water content results in a significant slowdown of dynamics. Increased water content enhances the hydrogen bonding network, yet simultaneously provides greater ionic mobility, resulting in a delicate balance between stabilization and dynamic restructuring of hydrogen bonds. These results contribute to the understanding of ion-specific effects in complex partially-hydrated polymer systems, highlighting the complex interplay between ion concentration, water structuring, and polymer hydration state. The study provides a framework for designing polymer membrane compositions with ion-specific properties.

Digital light processing (DLP) 3D printing of polymer networks comprising virus-like particles.

In this work, we introduce a 3D-printable virus-like particle (VLP)-enhanced cross-linked biopolymer system. VLPs displaying surface-available acrylate groups were prepared through aza-Michael addition to serve as resins. The VLP resins were then photopolymerized into a poly(ethylene glycol) diacrylate (PEGDA) network following DLP 3D printing. This approach represents a convergence of disciplines, where the synergistic interaction between virology and additive manufacturing unlocks new frontiers in biotechnology.

A bilayer hydrogel mimicking the periosteum-bone structure for innervated bone regeneration.

In bone tissue, nerves are primarily located in the periosteum and play an indispensable role in bone defect repair. However, most bone tissue engineering approaches ignored the reconstruction of the nerve network. Herein, we aimed to develop a bilayer hydrogel simulating periosteum-bone structure to induce innervated bone regeneration. The bottom "bone" layer consisted of gelatin methacryloyl (GelMA), poly(ethylene glycol) diacrylate (PEGDA), and nano-hydroxyapatite (nHA), whereas the upper "periosteum" layer consisted of GelMA, sodium alginate (SA) and MgCl2. The mechanical properties of the upper and bottom hydrogels were designed to be suitable for neurogenesis and osteogenesis, respectively. Besides, Mg2+ from the "periosteum" layer released at the early stage (within 7 d), which aligned with the optimal time window for nerve regeneration and osteogenic related neuropeptide release. Simultaneously, the prevention of long-term Mg2+ release (after 7 d) could avoid osteogenic inhibition caused by prolonged Mg2+ exposure. Additionally, the incorporation of nHA in the bottom "bone" layer supported the long-term osteogenesis due to its osteoconductivity and slow degradation. In vitro biological experiments revealed that the bilayer hydrogel (GS@Mg/GP@nHA) promoted neurite growth and calcitonin gene-related peptide (CGRP) expression in rat dorsal root ganglion (DRG) neurons, as well as the osteogenesis of rat bone-derived mesenchymal stem cells (BMSCs). Moreover, the in vivo experiments demonstrated that the GS@Mg/GP@nHA hydrogel efficiently promoted nerve network reconstruction and bone regeneration of rat calvarial bone defects. Altogether, the bilayer hydrogel GS@Mg/GP@nHA could promote innervated bone regeneration, providing new insights for biomaterial design for bone tissue engineering.

Fabrication of a MXene-based shape-memory hydrogel and its application in the wound repair of skin.

Wound dressings can generally complete hemostasis and provide temporary protection after skin damage. Herein, a MXene-based hydrogel was prepared from MXene, gelatin, poly(ethylene glycol)diacrylate (PEGDA) and N,N'-methylenebis(acrylamide) (HEAA) to prepare wound-dressing hydrogels for skin repair. HEAA and PEGDA crosslink polymerization formed the first layer of the network. Hydrogen bonds between MXene, PHEAA, and gelatin formed the second layer of the network. To make the hydrogel more suitable for skin repair, the mechanical properties of the hybrid hydrogel were adjusted. The MXene-based hydrogel could recover its original shape in 16 s upon immersion in water or for a few minutes under light irradiation. The obtained hydrogel showed good photothermal properties upon light irradiation (808 nm, 1 W cm-2) for 20 s, and its temperature on the surface could reach 86.4 °C. Due to its good photothermal properties, this MXene-based hydrogel was suitable for skin repair.

Development of a rapid-shaping and user-friendly membrane with long-lasting space maintenance for guided bone regeneration.

The success of guided bone regeneration (GBR) surgery depends largely on the use of GBR membranes to maintain space for bone regeneration and prevent soft tissue ingrowth. However, currently available commercial degradable GBR membranes are often limited by poor space maintenance ability and require additional suture or nail for fixation. To overcome these limitations, we developed a rapid-shaping, adhesive, and user-friendly GBR membrane (PLGA film-PGN) with long-lasting space maintenance by immersing an electrospun poly(lactide-co-glycolic acid) film in a photo-crosslinkable hydrogel composed of polyethylene glycol diacrylate, gelatin methacryloyl, and nanosilicate (PGN). The PGN hydrogel significantly improved the mechanical strength of the PLGA film-PGN and endowed it with plasticity and adhesive properties, making it more maneuverable. The maximum bending force that the PLGA film-PGN could withstand was over 55 times higher than that of the HEAL ALL film (a commonly used commercial GBR membrane). PLGA film-PGN also promoted the proliferation and osteogenic differentiation of rBMSCs. According to a critical-size rat calvarial defect model, PLGA film-PGN maintained the space within the defect area and significantly enhanced bone formation 4 weeks after the surgery. To conclude, the study provided a novel perspective on GBR membrane design and the multifunctional PLGA film-PGN membrane demonstrated great potential for bone defect reconstruction.

Sandwich-type channeled chemical hydrogels manufactured by 3D ink-jet printing under freezing conditions using a photochemical process for human cell cultures

This work aims to present the technology of preparing chemical hydrogels for cell culture by printing. It consists in drop-on-drop 3D ink-jet printing under freezing conditions of a solution containing a diacrylic compound (poly(ethylene glycol) diacrylate (PEGDA)) with an initiator (hydrogen peroxide) of photochemically induced polymerization and cross-linking. 3D printing takes place at a low temperature, thanks to which droplets of the solution immediately freeze, allowing the desired structures of the frozen solution to be built. UVC radiation of frozen structures at room temperature and in the presence of oxygen induces simultaneous melting and radical polymerization and cross-linking of PEGDA, resulting in the formation of a firm chemical hydrogel with the same shape as the shape of the printed frozen solution. Discussed are: (i) technological parameters, (ii) reaction mechanism, (iii) sol–gel analysis, (iv) morphology of printed hydrogels and (v) biocompatibility studies with the applied human fibroblasts, human umbilical vein endothelial cells and human neuroblastoma cells. A method for printing sandwich-type channeled structures was developed and shown in application for cell growth. This work demonstrates the feasibility of 3D printing biocompatible chemical hydrogels for cell culture and opens new possibilities for printing hybrid structures for biomedical applications.

New smart thermosensitive biomaterials on the basis of collagen modified by ethylene glycol vinyl glycidyl ether for 4D bioprinting

In this study, collagen reactive under UV radiation was obtained for the first time via the functionalization of the side amino groups of lysine moieties with unsaturated ethylene glycol vinyl glycidyl ether (Vinylox) containing, similarly to glycidyl methacrylate, an epoxy group. The presence of this group having a moderate reactivity provides selective grafting of the side amino groups of collagen in a neutral or weakly alkaline medium and excludes the formation of by-products in the Michael reaction and hydrolysis characteristic of the analog—glycidyl methacrylate. Photometry data indicate that with modification in a weakly basic aqueous solution at room temperature and a significant excess of Vinylox, a grafting degree of 23.4% can be achieved. For the first time, film-forming composites capable of photocuring were obtained by adding polyethylene glycol diacrylate and poly(N-isopropylacrylamide) to a weakly acidic aqueous solution of collagen. The presence of vinyl oxide groups provided satisfactory mechanical characteristics of films as the result of UV-initiated collagen cross-linking, while the presence of poly(N-isopropylacrylamide) ensured hydrophilic-hydrophobic smart sensitivity. The films have a well-developed fibrillar structure, and the size of voids enables the free movement of nutrients and other compounds. According to MTT assay data, the films release no cytotoxic components and maintain the metabolic activity of stem cells, providing sufficient density of stem cells on their surface. All of the factors mentioned above determine the prospects of using the films both as an artificial extracellular matrix scaffold and as smart thermosensitive scaffolds used to grow stem cells on their surfaces for subsequent laser transfer bioprinting.

4D Printed Protein‐AuNR Nanocomposites with Photothermal Shape Recovery

Abstract4D printing is the 3D printing of objects that change chemically or physically in response to an external stimulus over time. Photothermally responsive shape memory materials are attractive for their ability to undergo remote activation. While photothermal methods using gold nanorods (AuNRs) are used for shape recovery, 3D patterning of these materials into objects with complex geometries using degradable materials is not addressed. Here, the fabrication of 3D printed shape memory bioplastics with photo‐activated shape recovery is reported. Protein‐based nanocomposites based on bovine serum albumin (BSA), poly (ethylene glycol) diacrylate (PEGDA), and AuNRs are developed for vat photopolymerization. These 3D printed bioplastics are mechanically deformed under high loads, and the proteins served as mechano‐active elements that unfolded in an energy‐dissipating mechanism that prevented fracture of the thermoset. The bioplastic object maintained its metastable shape‐programmed state under ambient conditions. Subsequently, up to 99% shape recovery is achieved within 1 min of irradiation with near‐infrared (NIR) light. Mechanical characterization and small angle X‐ray scattering (SAXS) analysis suggest that the proteins mechanically unfold during the shape programming step and may refold during shape recovery. These composites are promising materials for the fabrication of biodegradable shape‐morphing devices for robotics and medicine.

Preparation of poly (polyethylene glycol diacrylate -co- maleic anhydride) cryogels and its adsorption performance of cationic dyes

The treatment of dye pollutants in wastewater was a serious environmental issue. In this paper, freezing radical polymerization was used to prepare poly (polyethylene glycol diacrylate -co- maleic anhydride) (p(PEGDA-co-MA)) cryogels with redox initiators of ammonium persulfate / tetramethylethylene diamine in aqueous solution. The mechanical property and chemical structure of cryogels were characterized compression tests, IR, and XPS. After that, adsorption performance of p(PEGDA-co-MA) cryogels for cationic dyes was measured and the maximum adsorption capacity for methylene blue and crystal violet was 447.7 mg·g−1 and 329.5 mg·g−1 (pH = 7.0), respectively. Adsorption isotherm, adsorption kinetics and adsorption thermodynamics were investigated to reveal adsorption mechanism of cryogel materials, which showed that monolayer chemical adsorption was dominant and the adsorption capacity decreased with the increase of temperature. This p(PEGDA-co-MA) cryogels would not only partly developed the polymerization method of vinyl monomers but also strongly expanded the field of dye adsorption materials.