N-oxide Research Articles

Oxoammonium-Catalyzed Oxidation of N-Substituted Amines.

We report the development of oxoammonium-catalyzed oxidation of N-substituted amines via a hydride transfer mechanism. Steric and electronic tuning of catalyst led to complementary sets of conditions that can oxidize a broad scope of carbamates, sulfonamides, ureas, and amides into the corresponding imides. The reaction was further demonstrated on a 100-g scale using a continuous flow setup.

First Total Synthesis of Deinococcucin A, a Key Glycolipid Found in Cell Membranes of Extremophilic Bacteria.

Deinococcucin A is a secondary metabolite isolated from a gut bacteria of carpenter ant, member of extremophilic Deinoccocus family. The structure is a glycolipid containing N‐acetyl glucosamine, linked in α anomeric position to a chiral 2,3‐dihydroxypropanamide moiety. We succeeded a new strategy starting directly from N‐acetylglucosamine and transforming in an efficient manner an allyl group to the corresponding chiral α‐hydroxyamide. Three key steps were used: the oxidation of primary amine to nitrile using TCCA, as well as its hydrolysis to the corresponding amide using palladium (II) catalyzed conditions. The synthesis was completed in only 10 steps with an overall yield of 3%.

Visible light-driven aerobic oxidation of amines coupling with H2O2 production catalyzed by CoPc/alkali metal-doped g-C3N4 Z-scheme heterojunction

Three environmentally friendly Z-scheme CoPc/alkali metal-doped g-C3N4 heterojunction composites were fabricated via in-situ immobilizing cobalt phthalocyanine (CoPc) on the surface of alkali metal-doped g-C3N4 nanosheet by simple hydrothermal method. These composites acted as efficient and recyclable heterogeneous photocatalysts realized that the highly selective aerobic oxidation of amines to the corresponding imines coupling of hydrogen peroxide generation at room temperature. Under irradiation by LED lamp, the imines and H2O2 were obtained with conversion ranges from 87.9 % to 92.0 %, selectivity more than 99 %, and production rate ranges from 3.27 to 3.40 mmol g−1 h−1, respectively. Based on the mechanistic analysis and characterization, the excellent catalytic activity derived from the Z-scheme mechanic and synergistic effect originated from O2 reduction and amine oxidation. On completion, after centrifugation, washing with solvent and drying under vacuum, the catalysts can be recovered and reused for five successive cycles of testing with a slight decrease in reactivity. For this work, a promising photo synthesis pathway with merits of mild, low-cost, pollution-free, and energy-saving was developed to produce imines coupling with H2O2 generation.

Unlocking the role of novel primary/di-amine oxidases in crop improvement: Tissue specificity leads to specific roles connected to abiotic stress, hormone responses and sensing nitrogen

Genetic improvements of solanaceous crops for quality and stress responsive traits are needed because of the central role vegetables and fruits have in providing nutrients to human diets. Copper amine oxidase (CuAO) encoding genes involved in metabolism of primary/di-amine nitrogenous compounds, play a role in balancing internal nitrogen (N) pools especially when external N supply fluctuates during growth, development and environmental stresses. In the present study, we investigated the occurrence, molecular evolution and possible role(s) of these unknown genes in tomato crops. Multiple genome-wide bioinformatics approaches led to the identification of eight bona fide CuAO genes (SlCuAO1–SlCuAO8) in the tomato genome with gene numbers like those in Arabidopsis and rice indicating their conserved functional relevance with a tandemly duplicated SlCuAO6-SlCuAO7 pair at chr.9. A conserved intron-exon size and phase distribution for SlCuAO2, 3, 4 pairs are similar to a recently identified single duckweed SpCuAO1 orthologue gene indicating its evolutionary conservation. Synteny analysis showed their closest association to Arabidopsis and but not with rice. Transcriptome data indicated that gene expression for about six genes (SlCuAO1, 2, 3, 4, 6, 7) is root specific, fruit specific for SlCuAO5 and flower specific for SlCuAO8 thus indicating amine oxidation is variable across tissues with a prominance in the root tissue. The majority of CuAO genes are negatively regulated by methyl jasmonate. Positive regulation, however, involves CuAO3/8. Transcript analysis of the ethylene-deficient transgenic lines indicated that ethylene is required for activation of SlCuAO4. CuAO4 and CuAO5 exhibited most significant tissues-independent gene expression responses across various nitrogen regimes. Drought, heat and N stress identified CuAO5 as an overlapping highly expressed gene that corroborates with putrescine accumulation for free and conjugated forms with an opposite abundance of bound forms. Taken together our study highlights new insights into the roles of copper amine oxidation genes and identifies CuAO5 as a multiple stress induced gene that can be used in genetic improvement programs for combining heat, drought and nitrogen use efficiency related traits.

Understanding Voriconazole Metabolism: A Middle-Out Physiologically-Based Pharmacokinetic Modelling Framework Integrating In Vitro and Clinical Insights.

Voriconazole (VRC), a broad-spectrum antifungal drug, exhibits nonlinear pharmacokinetics (PK) due to saturable metabolic processes, autoinhibition and metabolite-mediated inhibition on their own formation. VRC PK is also characterised by high inter- and intraindividual variability, primarily associated with cytochrome P450 (CYP)2C19 genetic polymorphism. Additionally, recent in vitro findings indicate that VRC main metabolites, voriconazole N-oxide (NO) and hydroxyvoriconazole (OHVRC), inhibit CYP enzymes responsible for VRC metabolism, adding to its PK variability. This variability poses a significant risk of therapeutic failure or adverse events, which are major challenges in VRC therapy. Understanding the underlying processes and sources of these variabilities is essentialfor safe and effective therapy. This work aimed to develop a whole-body physiologically-based pharmacokinetic (PBPK) modelling framework that elucidates the complex metabolism of VRC and the impact of its metabolites, NO and OHVRC, on the PK of the parent, leveraging both in vitro and in vivo clinical data in a middle-out approach. A coupled parent-metabolite PBPK model for VRC, NO and OHVRC was developed in a stepwise manner using PK-Sim® and MoBi®. Based on available in vitro data, NO formation was assumed to be mediated by CYP2C19, CYP3A4, and CYP2C9, while OHVRC formation was attributed solely to CYP3A4. Both metabolites were assumed to be excreted via renal clearance, with hepatic elimination also considered for NO. Inhibition functions were implemented to describe the complex interaction network of VRC autoinhibition and metabolite-mediated inhibition on each CYP enzyme. Using a combined bottom-up and middle-out approach, incorporating data from multiple clinical studies and existing literature, the model accurately predicted plasma concentration-time profiles across various intravenous dosing regimens in healthy adults, of different CYP2C19 genotype-predicted phenotypes. All (100%) of the predicted area under the concentration-time curve (AUC) and 94% of maximum concentration (Cmax) values of VRC met the 1.25-fold acceptance criterion, with overall absolute average fold errors of 1.12 and 1.14, respectively. Furthermore, all predicted AUC and Cmax values of NO and OHVRC met the twofold acceptance criterion. This comprehensive parent-metabolite PBPK model of VRC quantitatively elucidated the complex metabolism of the drug and emphasised the substantial impact of the primary metabolites on VRC PK. The comprehensive approachcombining bottom-up and middle-out modelling, therebyaccounting for VRC autoinhibition, metabolite-mediated inhibition, and the impact of CYP2C19 genetic polymorphisms, enhances our understanding of VRC PK. Moreover, the model can be pivotal in designing further in vitro experiments, ultimately allowing for extrapolation to paediatric populations, enhance treatment individualisation and improve clinical outcomes.

α-synuclein overexpression and the microbiome shape the gut and brain metabolome in mice

Pathological forms of α-synuclein contribute to synucleinopathies, including Parkinson’s disease (PD). Most cases of PD arise from gene-environment interactions. Microbiome composition is altered in PD, and gut bacteria are causal to symptoms in animal models. We quantitatively profiled nearly 630 metabolites in the gut, plasma, and brain of α-synuclein-overexpressing (ASO) mice, compared to wild-type (WT) animals, and comparing germ-free (GF) to specific pathogen-free (SPF) animals (n = 5 WT-SPF; n = 6 ASO-SPF; n = 6 WT-GF; n = 6 ASO-GF). Many differentially expressed metabolites in ASO mice are also dysregulated in human PD patients, including amine oxides, bile acids and indoles. The microbial metabolite trimethylamine N-oxide (TMAO) strongly correlates from the gut to the plasma to the brain in mice, notable since TMAO is elevated in the blood and cerebrospinal fluid of PD patients. These findings uncover broad metabolomic changes that are influenced by the intersection of host genetics and microbiome in a mouse model of PD.

Dysregulation of sympathoadrenal system activity in patients with microvascular angina

Abstract Introduction Recent studies have highlighted that a significant proportion of patients (up to 47%) undergoing coronary angiography due to clinical indications do not exhibit significant stenosis in epicardial vessels. Among these patients, up to 50% may suffer from microvascular angina (MVA). Despite the absence of intramural coronary artery lesions typically associated with atherosclerosis, the occurrence of transient myocardial ischemia and cardiac pain syndrome raises interest due to the incomplete understanding of their underlying mechanisms. Objective This study aims to comprehensively investigate sympathoadrenal system activity in patients with microvascular angina. Materials and Methods A total of 40 patients diagnosed with MVA, aged 35-76 years, including 11 (27.5%) men and 29 (72.5%) women, were enrolled, along with 20 healthy individuals. Assessment of sympathoadrenal system (SAS) activity involved determining daily urinary excretion levels of free and conjugated catecholamine fractions (CA) using solid-phase enzyme immunoassay: adrenaline (A), noradrenaline (NA), dopamine (DA), and DOFA. Additionally, catecholamine deamination enzyme activity—monoamine oxidase (MAO)—was determined using solid-phase EIA. Results Patients with MVA exhibited a significant increase in the excretion of all CA fractions. Specifically, adrenaline (A) excretion increased by 56.7%, surpassing the control by 1.7 times (p<0.001). Noradrenaline (NA) levels were elevated by 59.5% in MVA patients, which was 1.6 times higher than the control group (p<0.001). Dopamine (DA) levels in MVA patients increased by 31.0%, surpassing control values by 1.36 times (p<0.001). Moderate elevation in DOFA levels by 19.7% was observed, which was 1.23 times higher than the control (p<0.01). Ratios of CA sulfocatecholamine formation processes indicated pronounced deviations from normal. Gender differences revealed marked changes in sympathoadrenal activity, particularly in women (p<0.001). Studies of MAO activity on the first day identified a moderate decrease in its activity in MVA patients—0.03±0.002 units/ext. (p<0.01), while healthy individuals exhibited an activity level of 0.07±0.001 units/ext. Conclusion The findings underscore the crucial pathogenetic role of SAS in the development of MVA. The study demonstrates that the severity of ischemia correlates with disruptions in SAS components. Notably, these disruptions are pronounced in MVA, indicating an overload of the sympathoadrenal system—a critical component of organismal homeostasis. Under conditions of SAS overload, the pivotal enzyme in biogenic amine oxidation, MAO, undergoes significant transformation, leading to reduced activity towards monoamines. These findings were consistent with our clinical investigation.

I2-Mediated Synthesis of 1,3,4-Oxa/thiadiazoles from Aroylhydrazide and Acetonitrile/Thioacetamide.

A facile and convenient metal-free direct oxidative amination of acetonitrile followed by cyclization with aroyl hydrazide for synthesizing oxadiazoles has been investigated. Disubstituted 1,3,4-oxadiazoles were obtained at 50-82% yields using readily available acetonitrile as both reagent and solvent. In addition, the reaction of aroyl hydrazides with thioacetamide and cyanothioacetamide afforded 5-methyl-2-aryl-1,3,4-thiadiazoles and 2-aryl-1,3,4-oxadiazole-2-acetonitriles as the main products, respectively.

Mechanochemical Copper-Catalyzed Synthesis of NH-Sulfonimidamides by Oxidative Amination of Primary Sulfinamides

Mechanochemical Copper-Catalyzed Synthesis of <i>N</i>H-Sulfonimidamides by Oxidative Amination of Primary Sulfinamides

Application of Iodine-Amine Oxidation Approach in the Synthesis of Various N-Alkyl Phosphoramidate Oligonucleotide Derivatives

Introduction: Nowadays, use of phosphate modifications in oligonucleotide backbone has become a common approach for imbuing its structure with the desired beneficial properties. The recent advances in successful application of different classes of phosphate modifications in the design of therapeutic oligonucleotides have led to a renewed interest in the development of approaches for introducing diverse classes of phosphate modifications. Method: This study aims to investigate the efficiency and optimize protocols for the application of the iodine-amine oxidation reaction to produce various N-alkyl phosphoramidate oligonucleotide derivatives during the conventional solid-phase phosphoramidite synthesis method. Result: Various solvents and drying reagents were tested, and it was evaluated that even minor traces of water in a reaction mixture had a significant impact on yield. Using set of commercially available amines, it was shown that steric accessibility is a more critical parameter than nucleophilicity of the amino group in oxidative amination reaction. It was demonstrated that through use of amino alcohols and diamines during iodine-amine oxidation step various branched oligonucleotide structures can be synthesized. Conclusion: The obtained data indicates that the oxidative amination approach can be a promising tool for preparing various oligonucleotide derivatives during solid-phase synthesis without the use of specialized phosphoramidite monomers.

Deciphering the Two-Step Hydride Mechanism of Monoamine Oxidase Flavoenzymes.

The complete two-step hydride transfer mechanism of amine oxidation involved in the metabolism of monoamine neurotransmitters was scrutinized by DFT calculations. In living organisms, this process is catalyzed by monoamine oxidase enzymes. Herein, we focus on some intriguing aspects of the reaction that may have been previously noticed but have not been clarified to date. The first step of the reaction includes the C-H bond cleavage on the methylene group vicinal to the amino group of the monoamine substrate and the subsequent transfer of hydrogen to the N5 atom of the flavin prosthetic group of the enzyme. We confirmed the nature of this step to be hydride transfer by evaluation of the pertinent HOMO-LUMO gap together with analysis of orbital contours alongside the intrinsic reaction coordinate profile. Next, we investigated the rather peculiar intermediate adduct that may form between the amine substrate and the flavin molecule, featuring an unusually long C-N bond of ∼1.62 Å. Although this bond is quite stable in the gas phase, the presence of just a few explicit water molecules facilitates its dissociation almost without energy input so that the amine-flavin intermediate can form an ionic pair instead. We attribute the existence of the unusual C-N bond to a fragile balance between opposing electronic structure effects, as evaluated by the natural bond orbital analysis. In line with this, the intermediate in the solution or in the enzyme active site can exist in two energetically almost equivalent forms, namely, as a covalently bound complex or as an ion pair, as suggested by previous studies. Finally, we characterized the transformation of the intermediate to the fully reduced flavin and imine products via proton transfer from the amino group to the flavin N1 atom, completing the reductive part of the catalytic cycle. Although we found that explicit solvation substantially boosts the kinetics of this step, the corresponding barrier is significantly lower than that in the hydride transfer step, confirming hydrogen abstraction as the rate-limiting step of amine oxidation and validating the two-step hydride transfer mechanism of monoamine oxidases.

Exploring the Role of Titanate Perovskites in the Oxidation of Amines to Imines via Photocatalysis.

Considering that structural differences could affect the photocatalytic efficiency of titanate perovskites, cubic SrTiO3 (STO) and tetragonal CaTiO3 (CTO) were synthesised as models to elucidate the structure-activity relationship. STO and CTO materials were produced through hydrothermal approaches, adjusting parameters such as temperature and pressure to optimise material purity. Among the perovskite photocatalysts, two stand out for their exceptional photocatalytic capacity and crystalline purity: CaTiO3, prepared at 180 ºC for 36 h, and SrTiO3, synthesised at 200 ºC for 24 h. Notably, we explore the selective ability of these materials for the photocatalytic oxidative self-coupling of benzylamine (BZA) to produce N-benzylidenebenzylamine (BZI), with CaTiO3 emerging as the most efficient catalyst for this reaction. The CTO material prepared at 180 ºC for 36 h (CTO180T-36) achieved a peak BZI production of 0.5 mM, with a total conversion of BZA after 7 h of irradiation. This study also emphasises the crucial role of reaction conditions and perovskite morphologies in fine-tuning photocatalytic performance. These findings highlight opportunities for developing efficient and selective photocatalytic processes, holding the compromise for applications in organic synthesis and sustainable green chemistry.

One-pot synthesis of carbon dots/hydrochar and visible-light-driven photocatalysts for aerobic oxidative coupling of benzylic amines

Utilizing selective photocatalysis conversion of amines represents an environmentally sustainable and economically feasible approach to generating valuable chemical products in the industry. Herein, carbon dots (CDs) incorporated in hydrochar (CDs/HCPP) were synthesized by one-pot hydrothermal carbonization of pomelo peel (PP) coupled with freeze-drying and used for aerobic oxidative coupling of benzylic amines. CDs were produced using only the pomelo peel as the carbon source, without the addition of any extra carbon additives. CDs/HCPP exhibited the greatest catalytic activity, achieving a benzylamine conversion rate of 99%, which was nearly 5.5 times of carbonized PP (CPP) without CDs and 1.14 times of CDs alone. Additionally, the oxidation of other amines, such as p -substituted benzylamines with groups that donate and withdraw electrons, was also demonstrated to be highly active and reusable using CDs/HCPP. This study has the potential to pave the way for novel methodologies and insights into synthesizing biomass composites adorned with CDs, enhancing the efficacy of photocatalytic syntheses.

Boosting the solvent-free photocatalytic oxidation of benzylamine to N-benzylenebutylamine over BiOX/TiO2 heterojunction nanoflowers

Imines as valuable chemical intermediates can be synthesized by aerobic photocatalytic oxidation of amines, which is recognized as a promising and green route for imines synthesis. It is attractive to develop solvent-free photocatalytic oxidation of amines with high efficiency, especially with high activity and selectivity, but it is challenging. In the present work, flower-like BiOX/TiO2 (X = Cl, Br, I) heterojunction was designed for solvent-free photocatalytic oxidation of benzylamine to N-benzylidenebenzylamine. Type II heterojunction of BiOCl/TiO2 with 67.3 wt% of BiOCl achieved the high formation rate of 6316 µmol∙g−1∙h−1 and selectivity of 99 % on BiOCl/TiO2. To the best of our knowledge, the activity and selectivity are the highest for solvent-free photocatalytic system. The reason for the varied photocatalytic performances were investigated. The solvent-free photocatalytic mechanism was revealed and proposed. Moreover, the BiOCl/TiO2 photocatalyst can be used for photocatalytic oxidation of varied benzylamines to imines.

Highly enhanced fluoride removal from aqueous systems via solvent extraction utilizing trialkyl phosphine oxide as an efficient extractant

Solvent extraction (SX) has been recognized as an efficient approach for the large-scale removal of impurities, demonstrating considerable potential for fluoride extraction in industrial applications. However, existing fluoride extraction methods typically require the incorporation of additives to form complexes with fluoride for its removal. Due to the excessive additive requirements for efficient fluoride removal, these methods inevitably result in secondary contamination of feed solution, necessitating additional purification efforts to remove them. In this study, four extractants (trioctyl amine, tributyl phosphate, trioctyl phosphate, and trialkyl phosphine oxide (TRPO)) were investigated for fluoride removal via hydrogen bonding with hydrofluoric acid (HF). Various parameters, including the concentrations of extractants and stripping agents, pH values, extraction time, and temperature were initially optimized. It was found that TRPO exhibits the highest extraction efficiency for HF, with a single-stage extraction rate exceeding 70 %. Complete fluoride removal (> 99.9 %) was achieved through a consecutive four-stage extraction process. Further experiments, including maximum loading and slope analysis, combined with FT-IR and 19F NMR characterization, and DFT calculations elucidate the mechanism of the extraction. The transfer of HF into the organic phase is accomplished by the formation of a 1:1 hydrogen-bonded complex with TRPO. The loaded fluoride in the organic phase can be easily stripped by a base to get a fluoride salt. This study paves the way for the construction of novel SX systems to remove fluoride as HF.

Porous Bimetallic Ti-MOFs for Photocatalytic Oxidation of Amines in Air.

A family of microporous titanium-containing metal-organic frameworks (denoted as M2Ti-CPCDC, M = Mn, Co, Ni) has been synthesized by using a bimetallic [M2Ti(μ3-O)(COO)6] cluster and a tritopic carbazole-based organic ligand H3CPCDC. M2Ti-CPCDC are stable and display permanent porosity for N2 and CO2 uptake, ranking among the most porous titanium-based metal-organic frameworks. M2Ti-CPCDC crystals exhibit n-type semiconductor behavior. Further catalytic studies demonstrate that all M2Ti-CPCDC materials are applicable for triggering photo-oxidative reactions of amines in air. More specifically, amines with electron-donating groups afford the aldehydes as the main products, while amines bearing electron-withdrawing groups give rise to imines as the main product. Among them, Mn2Ti-CPCDC exhibit the best photocatalytic activity, with conversion of benzylamine up to 99% and selectivity of 99%. Mn2Ti-CPCDC could be recycled in at least three runs while retaining crystallinity and catalytic activity. The reaction mechanism indicates that photoinduced hole (h+), superoxide radical anion (O2·-), and singlet oxygen (1O2) are the main active species involved in the photo-oxidation process.

Orientation-Dependent Photocatalysis of Imine-Linked Covalent Organic Frameworks Based on Thienothiophenes for Oxidation of Amines to Imines.

Toward visible light photocatalysis, covalent organic frameworks (COFs) have recently garnered growing attention. The effect of different orientations of imine of imine-linked COFs on photocatalysis should be elucidated. Here, two COFs are developed with 2,5-diphenylthieno[3,2-b]thiophene (DPTT) and 1,3,6,8-tetraphenylpyrene (Py) linked by imine, affording DPTT-Py-COF and Py-DPTT-COF, respectively. Distinctly, DPTT-Py-COF and Py-DPTT-COF have high crystallinity and porosity, paving the way to highly efficient photocatalysis. Theoretical calculations demonstrate that both DPTT-Py-COF and Py-DPTT-COF are of similar bandgaps but of varied energy positions due to the different orientations of imine. Besides, characterizations disclose that DPTT-Py-COF delivers more enhanced charge separation and transfer than Py-DPTT-COF. Probed by the oxidation of amine to imine, DPTT-Py-COF exhibits a blue light photocatalytic performance superior to that of Py-DPTT-COF. DPTT-Py-COF, a highly recyclable photocatalyst, enables the oxidation of various amines to imines with oxygen. This work highlights that tuning the microenvironment of COFs unravels tenable performances in photocatalysis.

Enhanced Mg2+/Li+ separation performance of polyelectrolyte multilayers nanofiltration membranes modified by trimethylamine N-oxide zwitterions

Polyelectrolyte multilayer nanofiltration (NF) membranes have garnered attention for their potential in Mg2⁺/Li⁺ separation applications, particularly due to their positively charged nature and the versatility offered by the layer-by-layer (LbL) self-assembly technique. However, these membranes often face significant challenges in balancing high ion selectivity with adequate water permeability. Addressing these limitations, this study introduces a novel approach by grafting a zwitterionic material, trimethylamine N-oxide (TMAO), onto polyacrylamide hydrochloride (PAH), creating a new cationic polyelectrolyte (TPAH). By cyclically depositing sodium polystyrene sulfonate (PSS) and TPAH onto a polyethersulfone (PES) substrate, we have successfully fabricated a high-performance NF membrane (i.e., (PSS/TPAH)n) that demonstrates enhanced Mg2⁺/Li⁺ selectivity with high water permeability. TMAO features shorter distances between its positive and negative charge groups and smaller dipoles compared to other zwitterions. These characteristics enhance its ability to resistance to salt effects and transfer charge from amine oxide to water molecule. Furthermore, the grafting of TMAO enhanced the hydrophilicity of TPAH and regulated the charge distribution of the polyelectrolyte. Compared to the control membrane (PSS/PAH)n, the optimized membrane (PSS/TPAH)n showed reduced rejection of LiCl from 60.9 ± 2.7 % to 35.9 ± 1.5 %, while that of MgCl2 increased from 94.3 ± 1.6 % to 96.1 ± 0.7 %. Additionally, water permeability improved from 9.2 ± 0.9 LMH/bar to 16.1 ± 0.5 LMH/bar. Notably, the membranes exhibited an improved selectivity for Mg2+/Li+ ions in synthetic saline, reaching a maximum of 30.5 ± 1.5, highlighting its potential for practical separation applications. Density functional theory simulations indicate that TMAO not only enhances Donnan effect and intensify ion dehydration of polyelectrolyte multilayers NF membranes but also increases their hydrophilicity. In general, these polyelectrolyte multilayers NF membranes exhibit considerable promise for multiple applications, such as seawater pretreatment, groundwater softening and lithium extraction.

Enzyme Cascade with Four Enzymes in One Pot for the Synthesis of L‐Phosphinothricin

AbstractThe biocatalytic oxidative deamination‐ reductive amination process for the production of L‐phosphinothricin (L‐PPT) from D,L‐phosphinothricin (D,L‐PPT) is a green and environmentally friendly approach with significant development potential. In this study, the adopted technological route involves the oxidative deamination of the D‐PPT component in D,L‐PPT to 2‐oxo‐4‐(hydroxymethylphosphinyl)butanoic acid (PPO) by utilizing D‐amino acid oxidase (DAAO), followed by the catalytic reductive amination of PPO to L‐PPT using phosphinothricin dehydrogenase (PpDH). In order to enhance the catalytic rate and reduce the inhibitory effect of the intermediate product PPO on the catalytic process, optimization of both oxidative deamination and reductive amination phases was conducted through separate strategies of constant‐pressure oxygen supply and substrate feeding, respectively. A “two‐step one‐pot” method was employed to link the optimized reactions, significantly shortening the production time. Furthermore, the “two‐step one‐pot” catalytic strategy was optimized, ultimately achieving a high 97.7% yield of L‐PPT with ee of L‐PPT&gt;99.9% after 5.5 h of reaction under 800 mM D,L‐PPT catalytic conditions, D‐PPT and PPO could not bedetected in the reaction system, further enchanced the catalytic efficiency, production efficiency and product quality. The aforementioned results demonstrate that this proposed approach has great potential for industrial‐scale production of L‐PPT as well as significant competitive advantages in terms of economic feasibility.

Harnessing Solar Power for Oxidation of Organic Compounds by Re(I)Dipyrrinato Complexes.

Metal dipyrrinato complexes of 4d and 5d metals have distinctive features such as high absorption coefficients in the visible section and room temperature phosphorescence in the red region. This work demonstrates the light-assisted oxidation of organic compounds employing rhenium(I)dipyrrinato complexes as catalysts. The heavy atom effect in rhenium(I)dipyrrinato complexes leads to the formation of long-lived triplet excited states, and these complexes can generate singlet oxygen in excellent yields (up to 84 %). A method was developed for photocatalytic aerobic oxidation of sulfides and amines using only 0.05 mol % and 0.025 mol % of the rhenium(I)dipyrrinato complexes, respectively. The method is efficient, and within 2 h, a variety of substrates were oxidized to produce sulfoxides and imines in high yields (up to 97 %). Rhenium(I)dipyrrinato complexes work very well both in visible light and sunlight, making them promising candidates for photocatalytic applications.