Degradation Of Pollutants Research Articles

Efficient photocatalytic degradation of chloramphenicol from contaminated water over rGO@MoS2 nanocomposites

Antibiotics-based effluents pose a severe threat to the natural ecosystem by acting as reservoirs for the growth of drug-resistant bacteria if untreated. Herein, a facile and scalable approach was developed to engineer photocatalysts associating reduced graphene oxide (rGO) and molybdenum disulfide (rGO@MoS2) that were used for the degradation of chloramphenicol (CAP) from contaminated water under UV-light. The hydrothermally produced rGO@MoS2 catalysts contain CO, COH, and COC functional groups that contribute to the binding of CAP onto their surface. The rGO surface modification with MoS2 layers offers a high surface area for light absorption. Results show that the rGO@MoS2 catalyst (1:1 w/w) exhibits the highest degradation efficiency (DE) of 86 % within 180 min of light exposure at neutral pH. Further, the kinetic modelling studies for CAP degradation by rGO@MoS2 1:1 showed high linearity with pseudo-first order kinetics (R2 ∼ 0.9). The isotherm modelling studies correspond to Langmuir isotherm (R2 ∼ 0.99), suggesting monolayer-type interaction of CAP with the photocatalyst surface during photodegradation. Furthermore, the mechanism of degradation elucidated using scavenging experiments showed the involvement of both holes (h+) and electrons (e−) that contribute to the degradation of CAP by generating reactive oxygen species (ROS) like OH● and O2●− radicals. The applicability of the rGO@MoS2 photocatalyst towards the degradation of CAP was tested in Ganga water, wherein a similar ∼86 % CAP removal was observed. Furthermore, the photocatalyst was found to be stable and could be reused five times. Overall, these findings demonstrate the usefulness of the rGO@MoS2 1:1 composite as an efficient photocatalyst that can be used for the degradation of harmful organic pollutants from water bodies to provide a safer and cleaner environment.

Weak magnetic field for enhanced degradation of sulfamethoxazole by the CoFe2O4/PAA system: Insights into performance and mechanism

In this work, a novel approach coupling a heterogeneous weak magnetic field (WMF) with the CoFe2O4/peroxyacetic acid (PAA) system was employed to enhance the degradation of sulfamethoxazole (SMX). Under the optimized conditions of 50 mT WMF, 0.1 g/L CoFe2O4, 0.2 mM PAA, and initial pH 6.0, a complete degradation of 10 μM SMX was achieved in 25 min, exhibiting a high synergistic coefficient of 1.61. This result indicates a significant synergistic effect among WMF, CoFe2O4, and PAA in effectively degrading SMX. The introduction of WMF did not alter the pH application range of the CoFe2O4/PAA system. Furthermore, the degradation efficiency of SMX by the CoFe2O4/PAA/WMF system was significantly reduced in the presence of humic acid (HA) and bicarbonate ions (HCO3−), while chloride ions (Cl−) exhibited a minor inhibitory effect. Quenching experiments and electron paramagnetic resonance (EPR) analysis reveal that WMF did not alter the types of reactive oxygen species (ROS) generated in the CoFe2O4/PAA system. The degradation of SMX in the CoFe2O4/PAA/WMF system involved both radical (CH3C(O)O∙ and CH3C(O)OO∙) and non-radical (1O2) oxidation pathways, driven by the redox cycling between ≡Co2+/≡Co3+ and PAA, as well as the rapid adsorption and transformation of oxygen (O2) at oxygen vacancies (OV), respectively. The presence of WMF enhanced the utilization of PAA by CoFe2O4 by improving the convection and mass transport in the solution, facilitating the formation of superoxide anion (O2∙−) and supplemented lattice oxygen (O2−) through the directional migration of paramagnetic O2 towards the CoFe2O4 surface, thus significantly promoting ROS formation. Additionally, the degradation pathways of SMX in the CoFe2O4/PAA/WMF system were proposed based on density functional theory (DFT) calculations and the detected transformation products (TPs). The toxicity of SMX was effectively reduced, as verified by predictions from the Ecological Structure-Activity Relationship Model (ECOSAR) procedure. The excellent catalytic performance, reusability, and effective degradation of various organic pollutants demonstrated by the CoFe2O4/PAA/WMF system suggest its potential as a promising strategy for water treatment.

Activation of periodate by CNT for selective catalytic oxidation: The overlooked significant role of residual metal species as catalytic sites

Carbon nanotubes (CNTs) catalyzed activation of peroxides has been extensively investigated, while the role of residual metal species in CNT in the catalysis is largely overlooked. In the study, calcination treatment of pristine CNT at high temperatures was employed as an approach to gain an insight into the role of residual metal species as catalytic sites in promoted catalytic activation of periodate (PI). Firstly, the calcination treatment at 500–1100 °C significantly promoted PI activation by calcined CNT. By constructing the quantitative structure–activity relationships (QSARs) between several surface and bulk properties of CNT (such as total surface oxygen content, surface carbonyl group, bulk defect and residual metal species) and PI activation performance, the residual metal species were identified as the catalytic sites. Moreover, the purification method of pristine CNT in the concentrated HNO3 was confirmed to be not efficient to remove these residual metals. The calcination treatment can tune the electronic structure of residual metal species, and promote their exposure and electron donation capacity for PI activation, thus significantly improving PI activation performance. Moreover, IO3• was identified as the dominant reactive species in CNT/PI system via a line of approaches including quenching experiments, PI decomposition in the presence/absence of organic pollutants, electrochemical testes, high selectivity in degradation of organic pollutants, QSARs of substituted phenols, and analysis of degradation products of 4-bromophenol. Furthermore, the CNT/PI system exhibited a wide pH application range of 3–11, high anti-interference to bicarbonate, chloride and phosphate in water. The study advances the understanding on the residual metal species in CNT and its overlooked catalytic role in PI activation, and also provides a high-performance oxidation process for wastewater purification.

Visible-light-driven photocatalytic for degrading tetracycline wastewater by BiOI/Bi2O3 Z-scheme heterojunction

Direct Z-scheme heterojunctions can exhibit enhanced redox capacity in redox reactions compared to conventional heterojunctions. In this study, BiOI/Bi2O3 Z-scheme heterojunctions were synthesized by a facile co-precipitation and calcination method using BiOI as a precursor, and its photocatalytic activity was investigated by degrading tetracycline antibiotics in aqueous environment. Under visible light, the degradation efficiency of tetracycline reached 80.01 % and the photocatalytic degradation rate constant reached 0.0116 min−1 when the molar ratio of Bi and I in BiOI/Bi2O3 composites was 1:1, which were 2.8 and 4.8 times higher than that of pristine BiOI (0.0041 min−1) and Bi2O3 (0.0024 min−1), respectively. The heterojunctions exposed excellent stability that maintained at 78.80 % after four cyclic tests. The ascendant photocatalytic performance can be attributed to the formation of direct Z-scheme heterojunctions, which improves the separation and transfer efficiency of the photogenerated electron-hole pairs, and ·O2- is the main active substance in the degradation process. This research provides a green and convenient method for preparing photocatalytic heterojunctions, which is conducive to promoting the development of photocatalytic degradation of refractory pollutants under visible light.

Electric Field Driven of Tourmaline/g‐C3N4 Photocatalyst with Enhanced Photocatalytic Performance and High‐Efficient Pollutant Degradation

AbstractPhotocatalysis technology of g‐C3N4 is of great value in wastewater treatment, thus calling for developing a concise and high‐efficiency method to improve its photocatalytic efficiency. Here, a novel photocatalyst consisting of tourmaline particles (TPs) and graphitic carbon nitride (g‐C3N4) is prepared by a step calcining method with enhanced photocatalytic performance. The self‐polarized electric field of TPs attracts the photogenerated electrons generated by the catalyst and delays the recombination rate of electron‐hole pairs, for which reason the prepared photocatalyst exhibits a wider spectral response and stronger photocatalytic activity. The mechanism analysis exhibits that the reactive substances including h+, ·OH, 1O2, and ·O2− generated by TPs/g‐C3N4 effectively eliminate the contaminant during photocatalysis. The degradation efficiency of Rhodamine B (RhB) of g‐C3N4‐0.5% TPs is increased from 88.47% to 97.76% after 30 min illumination compared with pure g‐C3N4. Furthermore, to facilitate catalyst recycling and reuse, a photocatalytic lignocellulose membrane is prepared. After five cycles, the degradation efficiency of the membrane decreases from 97.89% to 95.54%, still maintaining 97.60%. This study has constructed an innovative tourmaline/g‐C3N4 photocatalyst and recyclable photocatalytic lignocellulose membrane with enhanced pollutant degradation properties by introducing naturally polarized minerals, providing a new approach for efficient water treatment.

Self-Assembled PDI-COOH/PDINH Supramolecular Composite Photocatalysts for Highly Efficient Photodegradation of Organic Pollutants

Photocatalytic degradation of organic pollutants is one of the green ways to solve environmental problems. In this study, the PDI-COOH/PDINH composite photocatalysts were successfully synthesized by electrostatic self-assembly. Under visible light irradiation, the degradation efficiency of the optimal PDI-COOH/PDINH sample reached 67%, which was 1.7 and 1.6 times higher than that of the self-assembled PDINH supramolecule and PDI-COOH supramolecule, respectively. The excellent photocatalytic performance of PDI-COOH/PDINH can be attributed to the enhancement of the separation and transport efficiency of photogenerated carriers by the construction of a heterojunction and the expanded electronic conjugated structure by the combination of organic–organic semiconductors. This study offers a new idea for the preparation of organic–organic composite photocatalysts.

Micron-Scale Vertical MoS2/Porous g-C3N4 Piezocatalyst via a Precursor's Supramolecular Self-Template Architecture: Degradation and Hydrogen Evolution.

Piezocatalysis can effectively harvest various kinds of mechanical energy with high entropy from the environment and drive some redox reactions without light irradiation, where MoS2- and g-C3N4-based piezocatalysts are recent research hotspots. This study constructs an architecture of ordered melamine hydrochloride-cyanuric acid/MoO42- supramolecular precursor via self-assembly, serving as a self-template for in situ tight growth of vertically aligned micron-scale MoS2 on porous foam-like g-C3N4(CMx) under S vapor with a bioinspired rooting and sprouting-like process. Experiments, DFT calculations, and finite element simulations collectively confirm the high piezoresponse of the CMx with high exposure of active sites and enhanced mechanical energy collection. The vertical interfaces and built-in electric fields in the composite induce efficient charge carrier separation and transfer. The optimized CM0.77 efficiently degrades various organic dyes and antibiotic under dark ultrasound [rhodamine B (RhB): 0.47 s-1, methyl orange (MO): 0.05 s-1, methylene blue (MB): 0.21 s-1, and tetracycline hydrochloride (TC): 0.03 s-1] and achieves hydrogen evolution (2431 μmol·g-1·h-1). Under simulated water flow (10 L/min), the expanded CM0.77/Al2O3 porous foam ceramic (CM/alumina ceramic) purifier device degrades 95% of 400 mL of RhB within 25 min. The developed ordered vertical MoS2/g-C3N4 piezocatalyst demonstrates rapid pollutant degradation and efficient hydrogen evolution under water flow and ultrasound, providing new insights for constructing multidimensional piezoelectric composites for environmental remediation and clean energy production.

Effective treatment of cyanide containing coking wastewater by catalytic ozonation with a novel ruthenium-supported catalyst

Biological treatment of coking wastewater for organic and cyanide compounds required extensive hydraulic retention times and prolonged startup periods. This study introduces a novel Ru, Ag, Mn loaded activated carbon (RuAgMn-AC) catalyst for catalyst ozonation, significantly enhancing the removal of the cyanide and organic compounds. In synthetic coking wastewater (SCW), RuAgMn-AC exhibits a high removal efficiencies, achieving 76.5% for chemical oxygen demand (COD) and 89.1% for cyanide in 30 min of reaction. Electron paramagnetic resonance (EPR) analysis, combine with radicals quenching experiments revealed that hydroxyl radicals (•OH), superoxide radicals (O2•−), and singlet oxygen (1O2) were the dominant reactive oxygen species (ROS) responsible for pollutant degradation. Moreover, the analysis of intermediate products revealed a gradually pH decreased from 10 to 5 during the reaction process, during which cyanide and cyanate were formed and eventually decomposed into nitrogen gas or ammonium. In addition, the catalytic ozonation with RuAgMn-AC effectively removed 91% of cyanide and 87.8% of COD from real coking wastewater (RCW) and maintained a stable removal efficiency after multiple batch cycles. Our study presents a promising solution for removing organic compounds and cyanide from coking wastewater compared to recent literatures.

H2O2-assisted room temperature preparation of crystalline TiO2 and Ti3C2Tx-derived C-doped amorphous TiOx homojunction for photocatalytic degradation of tetracycline

The light absorption, active sites, and charge carriers separation of photocatalysts are extremely important factors in the field of photocatalysis. Near-perfect lattice-matched homojunction constructed using disorder engineering and doping strategies is an effective strategy to improve photocatalytic activity. Herein, we developed crystalline TiO2 nanoparticles (NPs) and Ti3C2Tx MXene-derived C-doped amorphous TiOx homojunction (TCT) at room temperature. In this homojunction, TiO2 NPs are evenly distributed on the surface of the C-TiOx nanosheet to form a type-II structure, which promotes the separation of photogenerated carriers. The light absorption range of TCT extends to 550 nm due to the presence of intermediate energy levels in C-TiOx, which increases its photon absorption capacity. Moreover, TCT possesses a large number of oxygen vacancies, which are beneficial for improving the adsorption and degradation of pollutants. These characteristics of TCT could significantly improve its photodegradation performance for tetracycline. Interestingly, the precursor mass ratio of TCT with the best degradation efficiency is different under different illumination conditions, which is attributed to the different band gaps of C-TiOx and TiO2 NPs resulting in different light absorption ranges. This work provides a new approach to rationally designing crystalline and amorphous homojunction for photocatalytic applications.

New insights into the catalyzed ozonation mechanism of a hydroxyl riched goethite: Contributions of H2O2 and surface Fe2+

Fe-based catalysts have been widely used to catalyze ozonation during water treatment. Among these catalysts, goethite (α-FeOOH) is of concern for the properties of low cost, easy availability, and excellent performance. In general, the surface hydroxyl groups of goethite are believed to be crucial catalytic sites. However, the contributions of Fe2+ on the goethite surface and H2O2 produced from pollutant degradation have rarely been mentioned. In this study, a goethite with rich surface hydroxyl was fabricated to remove aromatics by O3 catalysis. Probe and quenching experiments together proved that although the •OH was produced less than the O2•⁻ and 1O2 in the catalytic system, it contributed about 95 % of the target removal. EDTA complexation and heating experiments suggested that when the surface Fe2+ of the catalyst was destroyed, although the Fe-site hydroxyl or the vacancy hydroxyl of the catalyst was retained, its catalytic activity was reduced greatly. The outcomes of degradation kinetics of acetic acid further confirmed that, in the catalytic process, most of •OH originated from the reaction of Fe2+ reducing HO2• and Fe2+ ozonation, while the surface hydroxyl contributed less than 44.7 %. Moreover, as the main source of HO2•, the role of H2O2 produced from aromatics degradation cannot be ignored. The detection of H2O2 precursors in the degradation byproducts further confirmed this opinion. Finally, an efficient circular route for •OH production was proposed. This may be beneficial for the development of efficient Fe-based catalysts.

Microwave-Assisted Hydrothermal Synthesis of Photocatalytic Truncated-Bipyramidal TiO2/Ti3CN Heterostructures Derived from Ti3CN MXene.

TiO2/MXene heterostructure has garnered significant interest as a photocatalyst due to its large surface area and efficient charge carrier separation at the interface. However, current synthesis methods produce TiO2 without clear crystal faceting and often require complicated postprocessing step, limiting its practical applications. We demonstrate a facile and controlled microwave-assisted hydrothermal synthesis for transforming multilayered Ti3CN MXene to a truncated-bipyramidal TiO2/Ti3CN heterostructure. The resulting TiO2 nanocrystals at the Ti3CN surface exhibited crystalline anatase truncated bipyramids, exposing {001} and {101} facets. We further tailored an indirect optical band gap of the TiO2/Ti3CN heterostructure in the range of 3.17-3.23 eV by varying the hydrothermal synthesis time from 15 min to 5 h at a fixed temperature of 160 °C. Efficient charge separation allowed us to decompose 97% of methylene blue (MB) within 30 min of ultraviolet (UV) light irradiation, ∼3.9-fold faster than the benchmark P25, higher than any other TiO2/MXene heterostructures. With simulated white light, we achieved over 60% efficiency of the dye decomposition within 2 h of irradiation, which resulted in 1.5-fold faster kinetics than P25. We also observed a similar excellent performance of Ti3CN-derived TiO2 in decomposing various persistent synthetic dyes, including commercial textile dye, methyl orange, and rhodamine B. In conclusion, our study provides a strategy for utilizing MXene chemical reactivity to produce highly crystalline optically active TiO2/Ti3CN heterostructure. The developed heterostructure can serve as an efficient photocatalyst for the degradation of organic pollutants.

Enhanced X-ray shielding efficiency and visible light degradation performance of a multilayer composite protective material

To mitigate the adverse effects of high-energy radiation, such as X-rays, on patients during medical procedures, a multifunctional composite nanofibrous membrane has been engineered to shield against low-energy X-rays. This study involves integrating processed oil-tea camellia shells (OCS) powder into molten polylactic acid (PLA) for modification. Concurrently, metallic Bi is introduced to enhance Bi2WO6, which is subsequently combined with modified PLA and electrospun into nanofibrous membranes for photocatalytic antimicrobial and organic pollutant degradation. Additionally, sodium hyaluronate (NaHA) and a silver nanoparticle solution are electrospun with PLA to form a skin-friendly protective layer. Following this, a chitosan (CS) solution containing WO3 and B4C is used as a coating on the multilayered membranes. The membranes are then freeze-dried to create sandwich-structured multilayer composite protective material. This method addresses challenges associated with polylactic acid (PLA) in electrospinning and alleviates limitations such as low light absorption and slow charge transfer in Bi2WO6. Compared to similar materials, this composite material is lightweight, flexible for cutting, and exhibits strong X-ray shielding capabilities. The composite nanofibrous membrane demonstrates a shielding efficiency of 97.75 ± 2.05 % at low X-ray energy (46 kVp). Moreover, under visible light, the membrane generates reactive oxygen species, resulting in the efficient removal of 98.03 % of methylene blue (MB), 96.35 % of rhodamine B (Rh.B), and 91.51 % of methyl orange (MO) within 180 minutes. Furthermore, it displays bactericidal activity against E. coli and S. aureus under both dark and light conditions. In natural settings, the composite membrane undergoes gradual degradation in soil, completely decomposing within 28 days due to the influence of rainfall and microorganisms. Consequently, this composite membrane holds significant promise for specialized medical protective applications.

Enhanced photocatalytic degradation activity of titanium dioxide by adsorbing aromatic amines through N-bonding

Narrowing the wide band gap of TiO2 (∼3.2 eV) to enhance its visible light efficiency is crucial for advancing photocatalytic degradation of organic pollutants in industrial wastewater. In this study, we achieved band gap reduction and slowed recombination rates by adsorbing some aromatic amines, like aniline and its electron-donating derivatives, onto TiO2. The predominantly present N-bonded amine species reduced the band gap and decelerated charge carriers’ recombination, enhancing photocatalytic degradation under visible light. In contrast, the amine with electron-withdrawing group is adsorbed as only H-bonded species, which showed no improvement in photocatalytic activity, performing similarly to pristine TiO2. This surface modification strategy offers potential for creating visible light-driven photocatalysts for effective degradation of organic pollutants in water.

Advancing Nanopulsed Plasma Bubbles for the Degradation of Organic Pollutants in Water: From Lab to Pilot Scale

The transition from lab-scale studies to pilot-scale applications is a critical step in advancing water remediation technologies. While laboratory experiments provide valuable insights into the underlying mechanisms and method effectiveness, pilot-scale studies are essential for evaluating their practical feasibility and scalability. This progression addresses challenges related to operational conditions, effectiveness and energy requirements in real-world scenarios. In this study, the potential of nanopulsed plasma bubbles, when scaled up from a lab environment, was explored by investigating critical experimental parameters, such as plasma gas, pulse voltage, and pulse repetition rate, while also analyzing plasma-treated water composition. To validate the broad effectiveness of this method, various classes of highly toxic organic pollutants were examined in terms of pollutant degradation efficiency and energy requirements. The pilot-scale plasma bubble reactor generated a high concentration of short-lived reactive species with minimal production of long-lived species. Additionally, successful degradation of all pollutants was achieved in both lab- and pilot-scale setups, with even lower electrical energy-per-order (EEO) values at the pilot scale, 2–3 orders of magnitude lower compared to other advanced oxidation processes. This study aimed to bridge the gap between lab-scale plasma bubbles and upscaled systems, supporting the rapid, effective, and energy-efficient destruction of organic pollutants in water.

Construction of S-scheme g-C3N4/PbTiO3 heterojunction and its highly efficient photocatalytic degradation of organic pollutants under simulated sunlight.

This study successfully synthesized a composite photocatalyst g-C3N4/PbTiO3 through hydrothermal and calcination methods using PbTiO3 and g-C3N4. The catalyst was characterized by XRD, FTIR, Raman, XPS, SEM, TEM, UV-vis DRS, PL, and other techniques. The results indicate that the composite photocatalyst exhibits efficient electron transfer, enhanced light absorption, effective separation and utilization of photogenerated electron-hole pairs, demonstrating superior photocatalytic activity. Under simulated sunlight, the removal efficiency of methyl blue (MB) with an initial concentration of 10mg/L reaches 93.0% after 120min. After five cycles, the degradation efficiency of MB is 79.2%, still maintaining 85% of the initial catalytic activity. The pH values in the range of 4.0-7.0, inorganic anions, and water quality have a minimal impact on the photocatalytic degradation of MB. Additionally, the composite photocatalyst exhibits strong removal capabilities for other pollutants, such as tetracycline. Therefore, the prepared catalyst demonstrates good feasibility for practical applications. Free radical quenching experiments indicate that hydroxyl radicals (·OH) are the primary active groups in the photocatalytic degradation of MB. Based on this, a photocatalytic mechanism involving a S-scheme heterojunction has been proposed. This study provides new insights into preparing PbTiO3 composite semiconductors and constructing novel S-scheme heterojunctions.

Persistent luminescent ZnAl-LDH nanosheets for all-weather degradation of nitenpyram and tetracycline: Superoxide radical induction, life cycle analysis and engineering applications

Photocatalysts designed for all-weather applications, capable of efficient charge carrier separation, are set to transform the adoption of photocatalysis-driven advanced oxidation processes in wastewater management. In this investigation, an energy-storing ZnAl-LDH@SrAl2O4:Eu2+, Dy3+ (SALDH) was synthesized successfully, optimized for the photocatalytic selective degradation of NTP and tetracycline hydrochloride (TC) under varying weather conditions, with 100 % degradation of both NTP and TC within 75 min. Remarkably, SALDH demonstrates energy storage capabilities that markedly reduce energy demands relative to traditional photocatalytic approaches. The primary reactive species identified were O2−, and the Fukui index, computed via density-functional theory (DFT), identified the specific interaction sites of O2− on NTP molecules. Utilizing the energy retention properties of SALDH, a novel, environmentally friendly device was engineered for processing organic pollutants in agricultural wastewater. This system harness the energy from solar radiation to induce the oxidation of pollutants. The experiments that were performed in the both artificially prepared lab-scale and actual agricultural WWT plants indicated the degradation efficiencies of 36 % and 37 %, respectively. As seen during the day, both SALDH and persulfate were capable of effectively decomposing organic contaminants; at night, the SA’s luminescence maintained the oxidative ability of ZnAl-LDH. Meanwhile, SALDH combines the corrosion resistance of ZnAl-LDH with good metal compatibility, enabling SALDH to effectively improve the photostability of long afterglow. This work contributes to the existing knowledge on the degradation of organic pollutants by efficient photocatalysts and points to possible implementations in water treatment processes.

A Review on the Roles of Extracellular Polymeric Substances (EPSs) in Wastewater Treatment: Source, Mechanism Study, Bioproducts, Limitations, and Future Challenges

Biological treatment is currently a favorable option to treat wastewater due to its environmentally friendly methods and minimal toxic by-products. The majority of biological wastewater treatment uses bacteria as treatment agents, which are known to have excellent capabilities for removing various pollutants. Researchers have extensively explored the use of extracellular polymeric substances (EPSs) generated by bacteria in wastewater treatment. This review focuses on the sources of EPSs, factors influencing their production, and their role in wastewater treatment. Bacterial species, nutrient availability, pH, temperatures, and the presence of toxins were mentioned to be the factors influencing EPS production by bacteria in wastewater treatment. Produced EPSs by bacteria may promote the aggregation, adsorption, decolorization, and degradation of pollutants. This review highlights the challenges of discovering new potential bacterial species and complex EPS extraction methods, as well as the importance of mass production for larger-scale applications.

Insight into efficient degradation of pentacyclic and hexacyclic sulfonamide antibiotics by synthetic trivalent copper: Performance and mechanism

High valent metal species, including Mn(III), Fe(IV) and Cu(III), have been identified as key intermediates in the degradation of pollutants in many advanced oxidation processes. However, unlike Mn(III) and Fe(IV), the current exploration of the reaction activity and selective oxidation mechanism of Cu(III) towards pollutants with different structures is still quite limited. Herein, the copper(III) periodate was synthesized to investigate the reactivity towards six sulfonamide antibiotics (SAs) including typical two pentacyclic structures (sulfamethoxazole (SMX) and sulfathiazole (STZ)) and four hexacyclic structures (sulfadiazine (SDZ), sulfamerazine (SMR), sulfamonomethoxine (SMM) and sulfapyridine (SPD)). The results indicated that all SAs almost completely removed by Cu(III) system after 10 min with the molar ratio of approximately 3:1 (Cu(III):SAs) and Cu(III) direct oxidation played the most important role. SAs with 6-ring substituents were more readily degraded by Cu(III) than SAs with 5-ring substituents, and the presence of electron-rich group such as -CH3 and -S in ring substituent increased the reactivity towards Cu(III). The introduction of coexisting anions (Cl−, SO42− and HCO3−) hardly affected the degradation of SAs by Cu(III) oxidation, while the addition of HA to some extent inhibited SAs degradation. The solution pH greatly affected the degradation of SAs by Cu(III) and the removal efficiencies of SAs roughly followed the rule of neutral > acidic > alkaline. The degradation mechanism of SAs with 5-ring and 6-ring substituents in Cu(III) system mainly included amino nitration, self-coupling, hydroxylation, S-N cleavage in SAs with 5-ring substituents and SO2 extrusion in SAs with 6-ring substituents. Although the real water matrix inhibited the degradation of SAs to varying degrees, Cu(III) still played a satisfactory performance on SAs degradation especially for electron-rich structure.

Bacteria-Triggered Mineralization of Silica Shells with Nanochannels for Biocatalysis in Harsh Conditions.

Biocatalytic processes using microorganisms are considered efficient and economically and environmentally friendly reactions. However, the viability and function of these microorganisms are prone to being hindered by various practical environments. Here, we reported a bacteria-induced nanochannel structure that endowed the microorganism with biocatalytic ability in harsh conditions. We revealed that the bacteria could trigger the fusion of silica nanoparticles on their surface by the secreted alkaline metabolite, resulting in silica shells with nanochannels on bacteria (bacteria@nSiO2). The nanochannel structure in silica shells endowed bacteria with biocatalytic ability in multiple harsh conditions. We revealed that these nanochannels could influence the mass transfer from the extracellular to the intracellular environment, which protected the bacteria from excessive toxic substance while preserving the mass exchange during biocatalysis. This feature ensured bacteria@nSiO2 with efficient bioactivity under harsh conditions for industrial catalysis and degradation of pollution, which cannot be achieved by corresponding native bacteria. Using the crude oil spill as a practical example, we presented that bacteria@nSiO2 could degrade highly concentrated crude oil, which any reported bacteria cannot achieve. This work emphasized the role of nanochannels in the regulation of cellular functions for enhanced biocatalysis. It also demonstrated a bacteria-triggered nanostructure formation, which is a promising methodology for nanotechnology and provides a strategy for more advanced organism-material hybrids.

Synthesis of hydrotalcite and titanium dioxide (HT-TiO2) composite for application in heterogeneous photocatalytics processes

The objective of the study was to synthesize a composite of hydrotalcite and titanium dioxide (HT-TiO2) for application in heterogeneous photocatalytic processes to the degradation of organic pollutants in aqueous media. The composites were characterized by X-ray diffraction and surface area, then an experimental design was carried out to evaluate the influence of pH and temperature on the adsorption capacity of pollutants against the anionic dye indigo carmine using a kinetic study. Photocatalytic tests were carried out in a chamber equipped with a UV lamp and hydrogen peroxide as an auxiliary oxidant in degradation. The adsorption results corroborated with the order of surface areas obtained, where the adsorption capacity followed the order of HT, HT-TiO2 5 %, HT-TiO2 10 %, and TiO2, respectively, obtaining removals up to 96.94 %. For the heterogeneous photocatalytic tests, the best conditions of the experimental design were used for each semiconductor, with a removal of up to 99.96 % being observed in 2 h. The use of hydrogen peroxide as an auxiliary oxidant reduced the reaction time to 45 min, demonstrating how joint effluent treatment techniques can increase the speed and efficiency of the process.