Polarizable Continuum Model Research Articles

Anisotropic Dielectric Screened Range-Separated Hybrid Density Functional Theory Calculations of Charge Transfer States across an Anthracene-TCNQ Donor-Acceptor Interface.

A density functional theory framework is developed to study electronic excited states affected by an anisotropic dielectric environment. In particular, an anisotropic dielectric screened range-separated hybrid (SRSH[r]) functional is defined and combined with an anisotropic polarizable continuum model (PCM) implemented through a generalized Poisson equation solver. We develop the SRSH-PCM(r) approach and use it to quantify the effect of anisotropy on an excited charge transfer (CT) state energy. In particular, the dielectric interface effect on the CT state within a donor-acceptor molecular complex of antrancene and tetracyanoquinodimethane is studied. The donor-acceptor complex and the dielectric interface are used to represent the interface between thin films consisting of these materials. We report the effect of such a dielectric interface on the energy of a CT and follow its dependence on the donor-acceptor distance. We also benchmark the anisotropy-affected energy by comparing to homogeneous dielectric calculated energies. Due to the planar interface, the anisotropic energies are expected to to match with those obtained based on isotropic calculations of the larger dielectric constant at large enough distances. The approach is applicable, in general, to more complicated dielectric constant distributions as expected to be found in actual interfaces of such thin films or in other systems, for example, for CT processes within photosystems.

Quantum chemical study of new oxadiazoles as efficient optical and nonlinear optical and photovoltaic materials under gas, PCM and COSMO solvent effects

The science of organic optical and nonlinear optical (NLO) materials has been captivating the scientific community owing to their extensive applications in optoelectronics, OLEDs, and telecommunications. This study presents the design and investigation of novel organic compounds of pyrene and 1,3,4-oxadiazole derivatives (1-oxza to 6-oxza), featuring various push–pull combinations. Quantum chemical calculations were employed to determine linear polarizabilities (α) and third-order NLO polarizabilities (γ). Notably, the largest average third-order NLO polarizability value was found to be 254.9 × 10−36 esu for the finely tuned push–pull system 6-oxza, which is ∼35 times greater than that of the prototype NLO molecule of p-nitroaniline (p-NA). Among the derivatives, 1-oxza exhibits the highest linear isotropic polarizability (αiso) value of 61.59 × 10−24 esu, while 5-oxza displays the highest linear anisotropic polarizability (αaniso) value of 60.09 × 10−24 esu. A notable increase of approximately ∼1 to ∼2 times in < γ > is observed for selected compounds (1-oxza, 4-oxza, 6-oxza), indicating that the Conductor-like Screening Model (COSMO) overestimates the values compared to the polarizable continuum model (PCM) and gas phases. Solvent significantly enhances third-order NLO polarizability amplitudes depending upon solvent polarity and strength of substitution groups. We calculated the frequency-dependent third-order NLO polarizability of 6-oxza at laser wavelengths ranging from 1400 to 1970 nm. The second hyperpolarizability EFISHG process (γ(−2ω; ω, ω, 0)) was calculated at a laser wavelength of 1400 nm, and the γ-amplitude was found to be 400.1 × 10−36 esu. The remarkable hyperpolarizability response in the gas phase is corroborated by TD-DFT calculations, which reveal a larger transition dipole moment of 3.062 and a lower transition energy of 3.780 eV as origin of larger hyperpolarizability for 6-oxza. A comprehensive analysis was performed based on FMOs for designed compounds to elucidate the intramolecular charge transfer (ICT) mechanisms and observed a notable reduction in energy band gap 4.89 eV for 6-oxza, which is responsible for enhanced NLO response. Additionally, DOS maps revealed the quantitative contributions of HOMOs and LUMOs for crucial electronic states related to the efficient ICT process. Additionally, we analyzed the photovoltaic properties and found that 6-oxza has the highest dye regeneration and the lowest open-circuit voltages of 1.89 eV and 2.22 eV, respectively. Our designed model compounds can put real-time such compounds under spotlight of scientific interests which seeks more efficient optical and NLO properties.

Exploration of the potential energy surfaces of the [formula omitted] clusters: Solvent phase vs gas phase

In the present work, we investigated the potential energy surfaces (PESs) of the structures of the Cu2+ ion in methanol clusters in two different media: gas and solvent phases. The effects of medium polarization by the integral equation formalism polarized continuum model (IEF-PCM) on structural and energetic parameters were examined on the conformers of the Cu2+(MeOH)n=9,10 clusters using the M06-2X/6-31++G(d,p) level of theory. Thus, in the solvent phase, the cluster structures are hexa-coordinated in the global minimum isomer. The study of the temperature dependency shows that the hexa-, and penta-coordinated structures compete with a large predominance of the hexa-coordinate structures with two solvation shells in the solvent phase. The Wiberg bond indices (WBI) analysis of the ionic bond confirms the structural study. In the IEF-PCM solvent compared to the gas medium, Wiberg bond indices of the tetra-, and penta-coordinate conformers are weaker, and the hexa-coordinate conformers in both media are nearly identical. This proves that compared to the solvent phase, the dative bond is stronger in the gas phase. This is supported by the significant difference in the electronic binding energies at saturation found with a single fitting function which are -88.6 and -146.6 kJmol−1 in the solvent and gas phases, respectively.

Cycloaddition of Butadiene with Perfluoroethylene: Prediction of a Periselectivity Switch under Pressure.

Defying the common Diels-Alder reactivity, the thermal cycloaddition between butadiene and tetrafluoroethylene (TFE) yields exclusively a [2 + 2] cycloadduct via a stepwise diradical mechanism. Here, we study the possibility of reverting to the normal [4 + 2] reactivity in this reaction under high pressure. DFT calculations using the eXtreme Pressure Polarizable Continuum Model (XP-PCM) suggest a more negative activation volume for the concerted [4 + 2] mechanism than the stepwise [2 + 2] mechanism and predict a switch in periselectivity at 1.4 gigapascal (GPa).

Conformational Changes and Coordination Stability of Flexible Tripeptides During Ni(II)-mediated Self-assembly.

The rational design of artificial supramolecular structures with specific properties and functions hinges the comprehensive understanding of the coordination and noncovalent interactions driving self-assembly. Herein, the self-assembly of supramolecular systems through octahedral coordination between Ni(II) ions and a flexible tripeptide was theoretically investigated using quantum chemical calculations. These calculations utilized the B3LYP functional with the polarizable continuum model. Our results indicate that tridentate sites have a greater propensity for coordination, and that the presence of chloride anions and conformational shifts enhance bidentate and monodentate coordination. Insights into the effect of counter anions on the stability of octahedral coordination and the prerequisites for self-assembly were gained by determining the stable conformation and potential reaction pathways of the tripeptide before and after adding chloride anions through an efficient automated conformational search. The formation of intramolecular hydrogen bonding interactions during the conformational changes was also studied using model calculations. Possible processes for initial self-assembly of tripeptide were proposed. This study enhances the fundamental understanding of the conformational behavior of building blocks during supramolecular formation and advance the potential for constructing future bioinspired complexes.

Asymmetric conformation of the high-spin state of iron(II)-tris(2,2-bipyridine): Time-resolved x-ray absorption and ultraviolet circular dichroism.

We analyze the structures of the low-spin (LS) ground state and the high-spin (HS) lowest excited state of the iron-(II)-tris bipyridine complex ([Fe(bpy)3]2+) using density functional theory PBE methods, modeling the solvent interactions with conductor-like polarizable continuum model. These calculations are globally benchmarked against a wide range of experimental observables that include ultraviolet-visible linear absorption and circular dichroism (CD) spectra and Fe K-edge x-ray absorption near edge spectra (XANES). The calculations confirm the already established D3 geometry of the LS state, as well as a departure from this geometry for the HS state, with the appearance of inequivalent Fe-N bond elongations. The simulated structures nicely reproduce the above-mentioned experimental observables. We also calculate the vibrational modes of the LS and HS states. For the former, they reproduce well the vibrational frequencies from published infrared and Raman data, while for the latter, they predict very well the low-frequency vibrational coherences, attributed to Fe-N stretch modes, which were reported in ultrafast spectroscopic experiments. We further present calculations of the high-frequency region, which agree with recent ultrafast transient infrared spectroscopy studies. This work offers a common basis to the structural information encoded in the excited state CD and the Fe K XANES of the HS state tying together different structural IR, UV-visible, and x-ray observables.

Theoretical investigation on the surrounding effects of second-order nonlinear properties for (N^C^N)Pt(II)Cl complexes

Pt(II) complexes are widely used as nonlinear optical (NLO) materials. The geometric and electronic structures, second-order NLO property and UV–Vis absorption spectra of (N^C^N)Pt(II)Cl complexes (1–4) N^C^N binding by central benzene and two lateral N-heterocycles) are evaluated by density functional theory (DFT) and time-dependent DFT calculations. The detailed environmental effect of total first hyperpolarizability (βtot) in the solution and crystal phases is simulated by polarized continuum model (PCM) and quantum mechanics/molecular mechanics (QM/MM) method, respectively. The results highlight that the complex 3 exhibits largest βtot value in the gas, solution and crystal phases which can be attributed to the higher electron π-delocalization of ligands. Further, an evident red shift towards longer wavelength is observed for the complex 3. The origin of larger βtot value can be reasonably interpreted by the two-level model. In addition, the surrounding exerts an important influence on modulating second-order NLO properties. The solvent effect results in the larger βtot value than that of gas phase. The intermolecular interaction plays an important role in crystal phase. The formation of dimer can reduce the βtot value in comparison with the βtot value of the monomer in the crystal phase, because the centrosymmetric configuration of dimer implies a decrease of dipole moment (μ) in contrast to the large μ value of monomer. It is expected that this work will provide some guidance for designing Pt(II) NLO materials.

DFT calculations of structural, chemical, electronic and thermodynamic properties of Rifampicin and Oxalic Acid

The thermodynamic properties of the compounds contribute to the theoretical analysis of the results of favorable energies that are subject to interaction. In this work, through the DFT study, the comparison of the functionals ωB97XD and B3LYP. Geometry optimization calculations and vibrational frequencies were performed for the individual ions and for the interactions. In all cases, all calculated vibrational frequencies are positive, confirming the optimized geometry obtained as a minimum on the potential energy surface. The calculations were carried out in solvent, considering the solvation effect in methanol using the IEFPCM (Integral Equation Formalism of the Polarizable Continuum Model) method. The present work aims to carry out a theoretical study, for in-depth investigations of structural, electronic and thermodynamic properties. In usability in the calculation of the thermodynamic properties, Rifampicin (RIF) and Oxalic Acid (OXA) and the interaction between RIF-OXA in the protonated form protonated RIF with charge +1 and deprotonated OXA with charge -1. In this context, the most favorable thermodynamic parameters in the interaction calculated RIF+-OXA- the values of ∆EZPVE+BSSE, ∆G298 and ∆H in kcal/mol more favorable are -19.62, -14.81 and -25,77.

Cocrystal screening of benznidazole based on electronic transition, molecular reactivity, hydrogen bonding, and stability.

Screening of cocrystals of active pharmaceutical ingredients is important in the development of pharmaceutical compounds because it improves bioavailability, stability, solubility, and many other physicochemical properties. In this work, quantum chemical calculations were utilized for the computational evaluation of the cocrystal screening of benznidazole (BZN) API via hydrogen bonding with four coformers (maleic acid, malonic acid, oxalic acid, and salicylic acid), and they contain carboxylic groups. The nitrogen of the imidazole ring in benznidazole and the carboxylic group of the coformer form a hetero-synthon connected by a strong hydrogen bond. The strength of the hydrogen bonding interaction O-H…N was measured using various tools. It was found that in comparison to BZN cocrystals with malonic acid, oxalic acid, and salicylic acid, the O-H…N interaction in the BZN-maleic acid cocrystal had higher interaction energy, indicating it had stronger hydrogen bonding. The strength of the hydrogen bond O-H…N for synthons was discovered to be more beneficial than the C-H…O interaction, as confirmed by ESP analysis. The BZN-salicylic acid cocrystal was found to be more reactive and polarizable, whereas the BZN-malonic acid cocrystal was more stable. Cocrystals of benznidazole exhibited better physicochemical characteristics than API benznidazole, as indicated by electron transition properties between the most significant orbitals. The computational evaluation for the screening of benznidazole cocrystals was performed in Gaussian 16 software using density functional theory (DFT) with the hybrid functional B3LYP and the basis set 6-311 + + G(d,p). The UV-Vis absorption spectrum in solvent water was analyzed using the TD-DFT/6-311 + + G(d,p) method to determine the influence of the solvent in cocrystals using a polarizable continuum model. The strength of the hydrogen bonding interactions O-H…N in each of those mentioned cocrystals was used to screen the cocrystals using tools such as thermodynamic probability, ESP analysis, QTAIM analysis, and NBO analysis. The pairing energy of interaction was measured by determining H-bond donor ( ) and H-bond acceptor ) parameters for hydrogen bonds from maxima and minima on the ESP surface. GaussView 06 software was used to create, visualize, and plot the optimized structure of the cocrystal and HOMO-LUMO orbitals. The AIMALL (10.05.04) software package generated the molecular graph for intra- and intermolecular interactions. The RDG-scatter plot, MEP map, and ELF plot were rendered from Multiwfn 8.0 and VMD 1.9.1 software.

Incrimination and impact on recovery times and effects of BN nanostructures on antineoplastic drug-electronic density study.

By delivering the drug to the intended cell location, the use of nanomaterials in the drug delivery system may influence how the patient receives the medication and may assist in mitigating severe side effects. Density functional theory was used to assess the use of boron carbon nitride nanocages (BNCNCs), boron nitride (BNNSs), and boron carbon nitride nanosheets (BNCNSs) as melphalan (Mln) drug carriers in both the gaseous and fluid phases. We systematically examined the dipole moment, density of states, frontier molecular orbital, and optimal adsorption energy to understand the targeted drug delivery potential of these nanostructures. Adsorption energy analysis revealed that in both gas and water media, Mln drug adsorption takes place spontaneously on all the conjugated structures. The occurrence of adsorption energy as physisorbed energy suggests that the process is reversible, and desorption can take place with a much lower energy input. This physical contact is appropriate for the unquestionable unloading of Mln medications to the intended location. The reactivity is higher in BNNSs and BNCNSs, while the stability is higher in BNCNCs. The recovery time shows a shorter time for BNNSs and BNCNSs, while BNCNC shows a potential desorption time in higher temperature. These conclusions are corroborated by the results of the quantum theory of atoms in molecules (QTAIM). After the interaction analysis, it was observed that the BNCNCs can act as potential carriers for the melphalan. From dipole moment analysis, all three nanostructures show a high hydrophilic nature but quite higher in BNCNCs after doping in both media. Overall, all the structures show the potential carrier for melphalan drug. The quantum mechanical approach, or DFT, has been used to study the fundamental structural, electrical, thermodynamic, and other aspects of proposed structures to develop an acceptable Mln drug detector. The adsorbate and all adsorbents were optimized via the hybrid B3LYP functional and the 6-311G + + (2d, p) basis set approach prior to the adsorption process. The Gaussian 09 package was used at 298K as the constant temperature and 1 atm as the constant pressure. The structures are examined using the same functional models for solvation analysis-6-311 G + + (2d, p) and B3LYP-as well as the polarized continuum model (PCM) model as the foundation set. Density of states was studied using GaussSum 3.0 software. The interaction studies QTAIM and RDG were studied using VMD and Multiwfn software.

Molecular insights into 5-hydroxymethylfurfural: a computational, spectroscopic, and docking investigation

The quantum chemical properties of 5-hydroxymethylfurfural were investigated using Density Functional Theory alongside vibrational spectroscopy. Key outcomes included optimizing molecular structure, vibrational frequencies, and various molecular parameters. By comparing DFT results with experimental infrared spectra, molecular motion was clarified. Reactive sites were identified through Molecular Electrostatic Potential and Fukui function analyses. Hirshfeld surface analysis revealed insights into the crystal structure’s intermolecular interactions and hydrogen bonding. Time-dependent Density Functional Theory combined with the Polarizable Continuum Model provided Ultraviolet spectra, highlighting charge transfer between the highest occupied and lowest unoccupied molecular orbitals. The compound’s electronegativity (4.7239) and electron affinity were assessed. Biological studies, including drug-likeness evaluations and molecular docking, also demonstrated potential physiological benefits, mainly through the compound’s low binding energy. A 100-nanosecond molecular dynamics simulation of the 5-HMF-4LB4 complex revealed its stability and dynamic behavior through analyses of Root Mean Square Deviation, Root Mean Square Fluctuation, hydrogen bonding, Solvent Accessible Surface Area, and radius of gyration.

Near-Infrared Ratiometric Hemicyanine Fluorescent Probes for Monitoring Mitochondrial pH Dynamics in Live Cells during Oxidative Stress and Hypoxia.

Novel near-infrared ratiometric molecules (probes A and B) produced by linking formyl-functionalized xanthene and methoxybenzene moieties, respectively, onto a xanthene-hemicyanine framework are detailed. Probe A exhibited a primary absorption peak at 780 nm and a shoulder peak at 730 nm and exhibited fluorescence at 740 nm↓ (signifies a downward shift in intensity upon acidification) in a pH 9.3 buffer and 780 nm↑ at pH 2.8 under excitation at 700 nm. Probe B featured absorptions at 618 and 668 nm at pH 3.2 and at 717 nm at pH 8.6, and fluorescence at 693 nm↑ at pH 3.2 and at 739 nm↓ at pH 8.6, in mostly the red to near-IR region. The ratiometric changes in the intensity of the fluorescent absorptions were reversed between A and B upon acidification as indicated by the arrows. Theoretical calculations confirmed that there were slight changes in conformation between probes and the protonated molecules, suggesting that the changes in emission spectra were due mostly to conjugation effects. Calculations at the APFD/6-311+g(d,p) level with a solvent described by the polarizable continuum model resulted in pK a values for A at 6.33 and B at 6.41, in good agreement with the experimentally determined value of 6.97 and an average of 6.40, respectively. The versatilities of the probes were demonstrated in various experimental contexts, including the effective detection of mitochondrial pH fluctuations. Live cell experiments involving exposure to different pH buffers in the presence of H+ ionophores, monitoring mitophagy processes during cell starvation, studying hypoxia induced by CoCl2 treatment, and investigating responses to various oxidative stresses are detailed. Our findings highlight the potential of attaching xanthene and methoxybenzaldehyde groups onto xanthene-hemicyanine structures as versatile tools for monitoring pH changes in a variety of cellular environments and processes.

Unlocking the enigma: Spectroscopic insights, molecular modelling, molecular docking, simulation and MMPBSA analysis of L-ornithine

L-ornithine (APA) has been thoroughly investigated in quantum chemistry using vibrational spectroscopy and density functional theory (DFT). The B3LYP/6-311++G(d,p) basis set was utilized to calculate optimal structure, vibration frequencies, and relevant variables. The computational results were validated by comparing the generated estimates of IR and Raman spectra with stated spectra. The MEP was applied to determine the molecule’s reactive areas and gain an understanding of its chemical responsiveness. Also, the UV–Vis spectrum was generated by combining the methods of the Polarizable Continuum Model (PCM) with Time-Dependent DFT, and comparisons were done with experimental data that was published in the literature. The FMO energy, with an energy gap of 6.095 eV, determines the structural chemical equilibrium. Electronegativity, which measures an atom’s attraction to electrons in a covalent bond, was found to be 3.589, and the electrophilicity index was determined to be 2.320 eV. Local reactivity descriptors were utilized to comprehend interactions within physiologically relevant molecular systems and facilitate the development of novel pharmaceutical drugs. Protein-ligand connections and stability were investigated using molecular docking and molecular dynamics (MD) modeling, which provided useful insights into possible therapeutic uses. To further aid in the comprehension of APA’s pharmacological profile and potential as a pharmaceutical agent, assessments of drug-likeness and ADME were accomplished to appraise the biological characteristics of the substance.

Stochastic Schrödinger equation for hot-carrier dynamics in plasmonic systems

We present a multiscale method coupling the theory of open quantum systems with real-time ab initio treatment of electronic structure to study hot-carrier dynamics in photoexcited plasmonic systems. We combine the Markovian Stochastic Schrödinger equation with an ab initio GW coupled to the Bethe–Salpeter (BSE) equation description of the electronic degrees of freedom, interacting with a metallic nanoparticle modeled classically according to the polarizable continuum model. We apply this methodology to study the effect of relaxation (T1) and pure dephasing (T2) times on the hot-carrier dynamics in a system composed of a quantum portion described at GW/BSE level, i.e., a CHO fragment adsorbed on a vertex of a rhodium nanocube, and of the rest of the nanocube, treated classically, when irradiated with a 2.7 eV light pulse, inspired by the experimental results on plasmon-driven CO2 photoreduction. A net hole injection from rhodium to CHO is observed, with and without the classical portion of the nanocube. The nanocube effect is to enhance the generated charge population by two orders of magnitude. The nonradiative decay, via a relaxation time T1 based on the energy-gap law, produces a rapid decrease of the charge population. Results with T2 only show that a charge injection retarded with respect to the pulse, which is present in the coherent dynamics, disappears when coherence is erased.

Elucidating the Photophysics and Nonlinear Optical Properties of a Novel Azo Prototype for Possible Photonic Applications: A Quantum Chemical Analysis.

The photophysics and nonlinear optical responses of a novel nitrothiazol-methoxyphenol molecule were investigated using density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods with the polarizable continuum model to take the solvent effect into account. Special attention is paid to the description of the lowest absorption band, characterized as a strong π → π* state in the visible region of the spectrum. The TD-DFT emission spectrum analysis reveals a significant Stokes shift of more than 120 nm for the π → π* state in gas phase condition. The results show a great influence of the solvent polarity on the nonlinear optical (NLO) response of the molecule. Specifically, the second harmonic generation hyperpolarizability β(-2ω; ω, ω) shows a large variation from gas to aqueous solvent (82 × 10-30 to 162 × 10-30 esu), exhibiting notably higher values than those reported for standard compounds such as urea (0.34 × 10-30 esu) and p-nitroaniline (6.42 × 10-30 esu). Furthermore, a two-photon absorption analysis indicates a large cross-section (δ2PA = 77 GM) with superior performance compared to several dyes. These results make the molecule quite interesting for nonlinear optics.

DFT study on the electronic and structural properties of M-Salen and M-Salphen electrocatalysts towards effective HER

We report on the electrochemical properties of Salen (N, N’- bis salicylaldehyde ehtylenediamine) and Salphen (N, N’- bis salicylaldehyde phenylenediamine) ligands using density functional approach. The structural and electronic properties, and the reduction potentials of metalated M-Salen and M-Salphen ligands (where M = Sb & Mo) that involve in hydrogen evolution reaction were explored. Optimized geometries of the chosen metalated complexes were obtained at B3LYP/6-31+G(d, p) & LANL2DZ level of theory. The effects solvation on the electrochemical properties of M-Salen and M-Salphen systems were considered in the presence of solvent acetonitrile using conductor-like polarisable continuum model (CPCM) at the same level of theory. Upon reduction process, the charge distribution around the metal centers Mo and Sb, and C, N and O atoms that lie in the coordination sphere is found to change considerably. As the first unoccupied orbital LUMO is directly connected to the electron affinity, the greater negative values of LUMO observed in Mo substituted Salen and Salphen ligands indicate their ability to exhibit better reduction process. Calculated reduction potential values of M-Salen systems were found to vary from −2.23V to −0.62V and hence the catalytic activity of M-Salen ligands follows the order of Mo-Salen > Sb-Salen > Salen and the same trend has been observed in M-Salphen systems with enhanced reduction potential of −0.54V recorded for Mo-Salphen system.

Exploring the impact of heterocyclic bridges for tuning the amplitudes of Nonlinear optical properties under Gas, IEFPCM and COSMO solvent models

Nonlinear optical (NLO) materials are a distinctive class of materials due to their NLO response and wide range of applications. We present a systematic quantum chemical study for designing triphenylamine based derivatives (1Ph to 3PhDTDZ) by modifying central bridge with various size and types of heterocyclic rings. Density functional theory (DFT) method is used to calculate the NLO properties including linear and third-order NLO polarizabilities (α and γ) by using M06-2X functional coupled with the 6-311G** basis set. The calculation results predict that among the designed compounds, 1PhDTDZ has the highest third-order NLO polarizability of 2347.7 x 10−36 esu and lowest transition energy of 1.828 eV. On the other hand, 3PhDTDZ has a greater amplitude (108.5 x 10−24 esu) of static linear polarizability (αiso). We also computed frequency-dependent third-order NLO polarizability values at various laser wavelengths (1500 nm to 1970 nm). This provides valuable information about the complex interaction between light and matter. Dynamic second hyperpolarizability of electro-optic Pockels effect (EOPE effect, (γ (−ω; ω,0,0)) is calculated at 1500 nm laser wavelength with a larger γ-amplitude of 36708.4 x 10−36 esu. The effect of solvent on α and γ has also been the primary focus of this research. An extensive solvation impact has been studied using integral equation formalism Polarizable Continuum Model (IEFPCM) and Conductor-like Screening Model (COSMO). Magnitudes of αiso and 〈γ〉 have shown variation from gas to solvent methods. While among solvents, amplitudes are seen 3.87 % to 11.29 % greater under the effect of COSMO-methanol than PCM-methanol. The Frontier molecular orbital (FMO) studies found a significant decrease in energy band gaps from 5.75 eV to 2.98 eV. Since our systems exhibit remarkable photovoltaic properties, they can be used as dye-sensitized solar cells (DSSCs). Their open circuit voltage (VOC) ranging from 1 eV to 4 eV. Thus, our designed triphenylamine based derivatives with distinct central heterocyclic bridges showcase remarkable efficiency as NLO materials, with additional benefits of exhibiting good photovoltaic properties.

Caffeine-Legal Natural Stimulant with Open Research Perspective: Spectroscopic and Theoretical Characterization.

Caffeine is an alkaloid with a purine structure and has been well known for centuries due to its presence in popular drinks-tea and coffee. However, the structural and spectroscopic parameters of this compound, as well as its chemical and biological activities, are still not fully known. In this study, for the first time, we report on the measured oxygen-17 NMR spectra of this stimulant. To support the assignment of our experimental NMR data, extensive quantum chemical calculations of NMR parameters, including nuclear magnetic shielding constants and indirect spin-spin coupling constants, were performed. In a theoretical study, using nine efficient density functionals (B3LYP, BLYP, BP86, CAM-B3LYP, LC-BLYP, M06, PBE0, TPSSh, wB97x), and in combination with a large and flexible correlation-consistent aug-cc-pVTZ basis set, the structure and NMR parameters were predicted for a free molecule of caffeine and in chloroform, DMSO and water. A polarized continuum model (PCM) was used to include a solvent effect. As a result, an optimal methodology was developed for predicting reliable NMR data, suitable for studies of known, as well as newly discovered, purines and similar alkaloids. The results of the current work could be used in future basic and applied studies, including NMR identification and intermolecular interactions of caffeine in various raw materials, like plants and food, as well as in the structural and spectroscopic characterization of new compounds with similar structures.

Study on low-rank coal flotation collector screening and performance based on molecular polarity index.

Extensive studies using a trial-and-error approach have been conducted on low-rank coal flotation collectors. However, screening efficient collectors remains a considerable challenge due to the lack of suitable screening principles. It has proven that polar compounds such as carboxylic acids and esters are effective collectors for low-rank coal flotation. In this work, the effects of carboxylic acid, alcohol, and methyl ester on the floatability of low-rank coal were compared, the flotation performance of the polar collector was evaluated with theoretical calculations, a suitable evaluation parameter was determined and a screening principle based on this parameter was determined. The results show that the enhancement effects of polar collectors on low-rank coal floatability follow the order of methyl decanoate > methyl laurate > methyl octanoate > sec-octanol > methyl oleate (or methyl oleate > sec-octanol) > n-octanoic acid. Compared with the molecular polarity index, the hydrophobicity indices log P and dipole moment cannot be used to accurately evaluate different types of collectors and the same type of collectors, respectively. At room temperature, liquid polar compounds with molecular polarity indices in the range of 6.0 ~ 8.0kcal/mol effectively enhance the floatability of low-rank coal. The molecular polarity index of the collector is used for the first time to screen effective collectors of low-rank coal in this work. This parameter is anticipated to be highly important for the development and research of low-rank coal and other mineral collectors. To obtain reasonable and accurate molecular structure, geometry optimization and frequency calculations of the studied collectors were conducted via the Gaussian 09 software package based on density functional theory at the B3LYP/6-311 + G (d, p) level. The integral equation formalism for the polarizable continuum model (IEF-PCM) was utilized with water as the solvent (dielectric constant = 78.36, T = 298K) for all the calculations. Then, the atomic charge distributions (MPA and NPA) and electrostatic potential maps, the dipole moment and molecular polarity index, and the log P and water solubilities of studied collectors were shown or calculated by Gauss View 5.0, Mutiwfn program and website ( https://www.molsoft.com/mprop/mprop.cgi ), respectively.

Theoretical Study of Metal-Ligand Interactions in Lead Complexes with Radiopharmaceutical Interest.

The 203Pb and 212Pb lead radioisotopes are attracting growing interest as they can aid in the development of personalized, targeted radionuclide treatment for advanced and currently untreatable cancers. In the present study, the bonding interactions of Pb2+ with twelve macrocyclic ligands, having an octa and nona coordination, were assessed using Density Functional Theory (DFT) calculations. The molecular structures in an aqueous solution were computed utilizing the polarized continuum model. The preference for the twisted square antiprismatic (TSAP) structure was confirmed for ten out of the eleven cyclen-based complexes. The characteristics of the bonding were assessed using a Natural Energy Decomposition Analysis (NEDA). The analysis revealed a strong electrostatic character of the bonding in the complexes, with minor variations in electrical terms. The charge transfer (CT) had a comparable energetic contribution only in the case of neutral ligands, while in general, it showed notable variations regarding the various donor groups. Our data confirmed the general superiority of the carboxylate O and aromatic N donors. The combination of the selected efficient pendant arms pointed out the superiority of the acetate pendant arms and the lack of significant cooperation between the different pendant arms in the probed ligands. Altogether, the combination led only to a marginal enhancement in the total CTs in the complexes.