Polarization-independent Diffraction Research Articles

Design of Far-Infrared High-Efficiency Polarization-Independent Retroreflective Metasurfaces.

Retroreflective gratings serve as fundamental optical elements in nanophotonics, with polarization-independent diffraction efficiency being one of the critical parameters for assessing their performance. In the far-infrared spectral range, traditional retroreflective gratings typically refer to metal echelette gratings, but their diffraction efficiency cannot approach 100% due to metal absorption. In the visible and near-infrared spectral ranges, metal echelette gratings have gradually been replaced by all-dielectric metasurfaces because dielectric materials exhibit negligible absorption at specific wavelengths. However, there is still a lack of relevant research in the far-infrared range, mainly due to the weak control capability of the existing devices over the polarization-independent phase. Here, we propose a kind of all-dielectric retroreflective metasurface composed of asymmetric pillars and freely tunable aperiodic multilayer films. The pillar structure can achieve polarization insensitivity, and the insufficient modulation capability of the dielectric materials can be compensated for by aperiodic Ge/ZnS films. The designed metasurface achieves the diffraction efficiency by RCWA, with the maximum larger than 99% and the overall reaching 95% (9.3-9.6 µm). We have provided detailed explanations of the design methodology and fabrication process. Our work lays the groundwork for further exploration and application of far-infrared lasers.

Generation of femtosecond pulses with an energy of ~10 μJ at a wavelength of 1.56 μM and nonlinear conversion of their frequency in a hollow revolver fiber

A fiber source of ultrashort pulses (USPs) with a powerful hybrid amplifier based on erbium and erbium-ytterbium fibers connected in series with a double cladding and an increased mode diameter, pumped by multimode laser diodes at a wavelength of 976 nm, was created and studied. Pulses from the output of a powerful amplifier at a central wavelength of about 1.56 μm with a duration of ~200 ps and an energy of up to 21.9 μJ, following with a frequency of 198.5 kHz, were compressed using a compressor based on a pair of volumetric polarization-independent diffraction gratings operating at transmission, with an efficiency of ≈73%. A minimum duration of compressed pulses of 742 fs was achieved, while their maximum energy and peak power were 15.8 μJ and ≈13 MW, respectively (maximum average power - 3.14 W) at a central wavelength of 1.56 μm in a beam with a Gaussian profile and measured quality parameters = 1.58 and = 1.38. When pumped by pulses from an erbium fiber source of various durations, the SRS transformation of 1.56 μm → 1.71 μm was realized in a hollow revolver light guide with a core of 75 μm in diameter filled with molecular hydrogen. Pulses with a maximum energy of about 200 nJ at a wavelength of 1.71 μm were obtained. The developed ultrashort pulse source can be useful in creating advanced systems for precision processing of transparent materials, especially silicon, as well as for other applications that require high energy and peak power of ultrashort pulses.

Binary geometric-phase holograms.

Diffractive optics elements have exhibited many novel characteristics through various methods of employing Pancharatnam-Berry, or geometric, phase. One geometric-phase hologram (GPH) subset, consisting of a π-difference binary sampling, shows polarization-independent properties that are not present in the continuous GPH and the dynamic-phase binary analog. Here, we investigate the binary geometric-phase holograms (bin-GPHs) realized with anisotropic liquid crystal (LC) polymers. First, the optical properties of the ideal binary polarization grating are derived and simulated showing 81% cumulative first-order efficiency, polarization-independent diffraction when applying a π-switching scheme, innate odd (m = 2k + 1) diffractive orders, and variable polarization output. After, experimental results of two key bin-GPH elements, the binary polarization grating (Λ = 30μm) and binary geometric-phase lens (f/100), with π-offset regions and a 0.5μm transition pixel are presented. We found that the fabricated non-ideal bin-GPHs exhibit near-maximum theoretical polarization-insensitive diffraction efficiency and tunable polarization outputs. The simple, and scalable, fabrication of the anisotropic bin-GPH provides the potential for implementation within the next-generation near-eye displays for polarization-invariant beam-steering and waveguides.

Simply structured polarization-independent high efficiency multilayer dielectric gratings.

A polarization-independent multilayer dielectric diffraction grating with a low aspect ratio and high diffraction efficiency was designed and fabricated. The diffraction grating designed with a grating density of 1200 lines/mm had an aspect ratio of 0.59, mean polarization-independent diffraction efficiency in the Littrow angle of ±2.5∘, and 1030-1080 nm wavelength range of 97.2%. The designed grating was fabricated using ion assisted deposition and reactive ion etching techniques. The mean polarization-independent diffraction efficiency of the fabricated grating was 96.1%, and its standard deviation was 0.68%. The fabricated diffraction grating was irradiated with a 1064 nm cw laser, with a power density of 30kW/cm2, for 1 min to measure the temperature change before and after the laser application. It was verified that the temperature variation of the diffraction grating without heat treatment was 8.8°C, and the temperature variation after heat treatment at 400°C decreased to 2.3°C.

Multi-functional two-dimensional holographic grating based on silver pattern coated by azopolymer

A two-dimensional diffraction device with the properties of polarization modulation, angular sensitivity, polarization-independent diffraction efficiency and repeatable recording has been designed and fabricated in an azopolymer-silver double-layer film by means of two-step holographic exposure. A silver pattern is formed in the light field with the sinusoidally distributed intensity, and then a polarization holographic grating is recorded in the azobenzene liquid-crystalline layer through the interference of two orthogonally linearly polarized lasers. We report here that the polarization states of the diffraction beams from the recorded two-dimensional grating are orthogonally modulated; the diffraction efficiency is related to the incident angle of the probe light and the rotation angle between the two-step recording, while independent on the incident polarization state. Furthermore, the experimental results are analyzed through the scalar diffraction theory and Jones matrices.

Peculiarities of the acousto-optical interactions of Bessel light beams in crystals

The noncollinear acousto-optical filtration of diffracted Bessel light beams in uniaxial paratellurite crystals has been investigated. With the use of the method of overlap integrals it is shown that independently on the order of Bessel light beams in the conditions of transverse phase-matching of diffracted waves in the range of optical spectrum of 0.4-1.1 nm in paratellurite crystals the bandwidth of transmission of ∼0.52 nm is reached due to detuning from Bragg’s synchronism only. It is shown that in uniaxial gyrotropic crystals polarization-independent diffraction of Bessel light beams is possible, i.e. Bragg diffraction efficiency is independent of the polarization state of the incident beam. It has been stated that the physical reason of such diffraction is simultaneous realization of two processes of anisotropic scattering under which the Bragg synchronism conditions are realized for the orthogonally polarized elliptical Bessel beams.

Ultrasonic diffraction of Bessel light beams in uniaxial gyrotropic crystals

Specific features of the acousto-optic diffraction of Bessel light beams propagating in the vicinity of the optical axis of a uniaxial gyrotropic crystal have been investigated. The dependences of the diffraction efficiency on the acousto-optic interaction length, ultrasound power, and polarization state of the incident Bessel light beam have been analyzed using the coupled-wave equations and the overlap-integral method. It is shown that polarization-independent diffraction of Bessel light beams is observed in paratellurite crystals, when the Bragg diffraction efficiency is independent of the polarization state of the incident beam. The physical reason for this diffraction has been established (both theoretically and experimentally) to be simultaneous implementation of two processes of anisotropic scattering, at which the Bragg synchronism conditions are satisfied for orthogonal polarized Bessel beams with elliptical polarization.

High-efficiency polarization-independent diffraction by transmission grating with a connecting layer

We describe a novel transmission grating with a connecting layer to achieve high efficiency diffraction with polarization-independence. The grating duty cycle and period are optimized by modal method. Accurate grating depth and connecting layer thickness are optimized using rigorous coupled-wave analysis. High efficiencies of 99.21% for TE polarization and 99.12% for TM polarization can be achieved with the optimized grating parameters. Furthermore, the grating with a connecting layer can show efficiencies larger than 97% for both TE and TM polarizations within the given range of grating depth and connecting layer thickness, which will be significant for practical applications of such a high-efficiency polarization-independent grating with a connecting layer.

Electrically switchable, polarization-independent diffraction grating based on negative dielectric anisotropy liquid crystal

An atomic force microscope is used to scribe polymer-coated substrates to create an electrically controlled liquid crystal-based polarization grating. The grating is nondiffracting in the voltage-off state and diffracting in the voltage-on state. Based upon an optical phase difference of approximately π between adjacent pixels, the grating’s efficiency is independent of optical polarization and can be prepared for diffraction in either one or two dimensions.

All-optical polarization-independent diffraction in dye-doped cholesteric liquid crystal

We present a detailed description of a novel dye-doped cholesteric LC cell that exhibits polarization-independent diffraction based on a photochromic mechanism. The photochromic phase grating exhibited over 90% polarization independence of the writing beams, and over 90% polarization-independent self and probe diffractions were observed. No external ac or dc field is needed for operation. Unpolarized light can also be used for writing-in beam and/or read-out beam, making this method immediately suitable for applications of light modulation. To our knowledge this cell represents the first example of polarization-independent photochromic phase modulation and light diffraction, for both writing and probe beams, in an anisotropic liquid crystalline material.

Holographically generated twisted nematic liquid crystal gratings

A reflection holographic method is introduced to fabricate an electro-optically tunable twisted nematic (TN) liquid crystal (LC) grating, forgoing the geometrical drawing. The photoisomerization process occurring on the LC alignment layers of an LC cell in the reflection holographic configuration gives a control over the twist angle, and the grating spacing is determined by the slant angle of reflection holographic configuration. The resulting diffraction grating is in a structure of a reverse TN LC, permitting a polarization-independent diffraction efficiency. The electro-optic tunability of the diffraction efficiency is also demonstrated.

P-167: FDTD and Elastic Continuum Analysis of the Liquid Crystal Polarization Grating

liquid crystal polarization grating (LCPG) has advantages of polarization independence of the zero diffraction order, nearly 100% diffraction efficiency in the first orders, and higher resolution capability over previously reported binary LC gratings. Here we analyze the LCPG, an electrically controlled, polarization-independent light modulator using the finite- difference time-domain (FDTD) method and the elastic continuum theory. The optical performance is studied and critical electrical parameters for a LCPG cell are presented. 1. Introduction of liquid crystal (LC) light modulators operating on unpolarized light have been proposed in an effort to overcome the substantial losses in conventional LC displays that require polarized light. Most prominently, Bos and coworkers suggested several potentially efficient and polarization-independent diffraction gratings using liquid crystals (1-4). These approaches, however, face crucial limitations for real applications due to their binary nature: fabrication difficulty and the easy appearance of defects. They therefore tend to have inherently large periods that result in many diffraction orders with small diffraction angles. A newly demonstrated liquid crystal polarization grating (LCPG) (5) is a switchable diffractive optical element with a continuously varying, periodic, anisotropic index profile. As shown in Fig. 1(a), this can be embodied as a nematic director that follows (6): n(x) = ˆ cos(x / ) + ˆ y sin(x /) + ˆ (0) (1)

Polarization-Independent Liquid Crystal Grating Fabricated by Microrubbing Process

A novel rubbing process for generating a very fine liquid crystal (LC) alignment pattern is proposed: we term this the “microrubbing process”. An alignment film (polyimide) is rubbed using a metal ball and the thicknesses of rubbed lines are controlled by the normal load. It is described that the maximum line thickness is restricted by the ball diameter and thickness of the alignment film. An LC grating with homogenous and twisted-nematic orientation domains is proposed and is successfully fabricated using the microrubbing process. Polarization-independent diffraction efficiency is confirmed in the low applied-voltage region below the threshold voltage of the electro-optical effect and the high applied-voltage region above 2 V. The diffraction efficiency almost reaches the theoretically maximum value at an optimum applied voltage and is electrically controllable while maintaining polarization-independent diffraction properties.