Polarization Gratings Research Articles

54‐2: Distinguished Student Paper: Increasing the Pixel Density for VR Displays with a Polarization Grating

An optical approach to double the pixel density by using a Pancharatnam‐Berry deflector (PBD), which generates two virtual shifted‐pixel grids based on polarization‐multiplexing, is present. A three‐layer multi‐twist PBD is fabricated, which can achieve high diffraction efficiency, broad bandwidth, and large incident angle in the visible spectral region.

Liquid crystal integrated metalens with dynamic focusing property.

Metalenses are developing fast towards versatile and integrated terahertz (THz) apparatuses, while tunable ones are highly pursued. Here, we propose a strategy that integrates dielectric metasurfaces with liquid crystals (LCs) to realize the dynamic focal spot manipulation. The silicon pillar meta-units of the metasurface are properly selected to generate different phase profiles for two orthogonal linear polarizations, permitting a laterally or axially altered focal spot. After LCs integrated, polarization-multiplexed focusing can be achieved via electrically varying the LC orientations. We demonstrate two metalenses with distinct functions. For the first one, the uniformly aligned LC works as a polarization converter, and further switches the focal length by altering the bias. For the second one, an LC polarization grating is utilized for rear spin-selective beam deflection. Consequently, a THz port selector is presented. This work supplies a promising method towards active THz elements, which may be widely applied in THz sensing, imaging, and communication.

Simple techniques to generate binary periodical polarization fields.

We report two new, to the best of our knowledge, methods to generate polarization gratings, whose basic cells are formed by sections that are orthogonally polarized. One of the methods employs a spatial filtering setup that modulates the diffraction orders in the Fourier domain of a Ronchi grating, with two orthogonal polarizations. In the second method, a binary phase modulation, generated by a liquid crystal device, is converted into orthogonal polarizations in different zones of an incident beam. The analysis of the generated polarization states is made at 1/4 of the Talbot distance of the generated gratings. The experimental results are in good agreement with the theoretical description.

Snapshot phase-shifting diffraction phase microscope.

We propose a novel and simple snapshot phase-shifting diffraction phase microscope with a polarization grating and spatial phase-shifting technology. Polarization grating separates the incident beam into left and right circular polarization beams, one of which is used as the reference beam after passing through a pinhole. Four phase-shifted interferograms can be captured simultaneously from the polarization camera to reconstruct the high spatial resolution phase map. The principle is presented in this Letter, and the performance of the proposed system is demonstrated experimentally. Due to the near-common-path configuration and snapshot feature, the proposed system provides a feasible way for real-time quantitative phase measurement with minimal sensitivity to vibration and thermal disturbance.

Polarization holographic characteristics of TI/PMMA polymers by linearly polarized exposure

Polarization gratings can be recorded in photo-induced anisotropic materials. Here, we examined the anisotropy of TI/PMMA (IRGACURE 784 doped polymethyl methacrylate) polymer by investigating the maximum refractive index modulation of TI/PMMA polymer due to photo-induced birefringence which reached 9.06 × 10−5. Based on the linearly polarized light theory, the diffraction efficiency and polarization direction of the diffracted grating in TI/PMMAs were investigated with two different polarized incident beams. When the polarization angle difference between two incident beams increased from zero to π/2, the diffraction efficiency gradually decreased, while the polarization direction of the diffracted beam was different from that of recording beam. When the angle difference of polarization between two incident beams was π/2, namely, orthogonal polarization recording, the polarization direction of diffracted grating would be consistent with that of recording beam. In the case of orthogonal polarization recording, the diffraction efficiency of 1–3 mm TI/PMMA polymer was obtained by 5%, 12% and 16%, respectively. In the experiment, when the intersection angle difference between two incident beams was π/2, the polarization multiplexing storage of TI/PMMA polymer was realized with the dynamic range in 1–3 mm samples of 0.16, 0.22 and 0.26 by orthogonal polarization recording, respectively. The angular and polarization multiplexing storage of holographic grating was realized in TI/PMMAs. The research on polarization holographic storage could provide the experimental basis and feasibility for multi-dimensional multiplexing storage in TI/PMMA polymer.

Extended-viewing-angle waveguide near-eye display with a polarization-dependent steering combiner.

A waveguide-based near-eye display (WNED) with an extended viewing angle using a polarization-dependent steering combiner (PDSC) is proposed. The novel eyepiece-combiner is composed of polarization gratings and polarization optics attached to the outcoupler part of the waveguide, which can control the output beam path depending on the polarization state. The viewing angle limited by the grating properties can be extended up to twice. Also, an ultrathinness of about 1.4 mm is suitable for the WNED. The demonstrated prototype system achieves a horizontal field of view of 33.2°, which is 2 times wider than the conventional structure (without the PDSC). The proposed configuration can resolve the viewing angle issue for the WNED.

High-efficiency aerial display using a liquid crystal polarization grating, a retroreflector array, and a right-angle prism.

An aerial display scheme consisting of an orthogonal circular polarization grating (OCPG), a waveplate, a retroreflector array (RRA), and a right-angle prism (RAP) was developed. Because of the OCPG's functionality, retroreflected light from the RRA is transmitted through the RAP boundary surface by avoiding the total reflection condition. The proposed system can potentially increase optical throughput to 100% by designing the boundary surface incidence angle to be Brewster's angle. The scheme's feasibility was demonstrated experimentally using an OCPG and waveplate that were fabricated from polymer liquid crystal with optical anisotropy using a photoalignment technique. The scheme should be used as a type of aerial display that is compatible with polarization-diffractive elements called Pancharatnam-Berry phase elements.

Absorption-based polarization gratings.

We demonstrate an absorption-based polarization grating made of dichroic dye-doped polymerizable liquid crystal. These gratings manifest a polarization-sensitive diffraction efficiency over the absorption band of the employed dye material, based on our theoretical analysis and experimental evidence. The spectral range can be easily tailored by varying the dye material. Since these gratings generate first-order diffracted beams with orthogonal circular polarizations, they can be utilized as key components in polarimetry systems. Meanwhile, due to their absorptive nature, these polarization gratings can function as LED-compatible polarization masks for photopatterning while fabricating various liquid crystal devices.

All-digital Stokes polarimetry with a digital micromirror device.

Stokes polarimetry is widely used to extract the polarization structure of optical fields, typically from six measurements, although it can be extracted from only four. To measure the required intensities, most approaches are based on optical polarization components. In this work, we present an all-digital approach that enables a rapid measure of all four intensities without any moving components. Our method employs a polarization grating (PG) to simultaneously project the incoming mode into left- and right-circular polarized states, followed by a polarization-insensitive digital micromirror device (DMD), which digitally introduces a phase retardance for the acquisition of the remaining two polarization states. We demonstrate how this technique can be applied to measuring the SoP, vectorness, and intramodal phase of optical fields, without any moving components, and shows excellent agreement with theory, illustrating fast, real-time polarimetry.

White-light circular-polarization imaging using pairs of polarization gratings and wedge prisms.

A novel, to the best of our knowledge, method for circular-polarization imaging with white light is presented. The vital optical elements of the proposed system are two polarization gratings (PGs) and a wedge prism. The chromatic dispersion of the PG diffraction angle is compensated by the difference of the grating period for the two PGs. In addition, the distance between the diffracted lights on the imaging plane is controlled by using a wedge prism. As a result, ${S_3}$S3 of the Stokes parameter, including the wavelength dependence of a scarab beetle, was observed at a time, and the ${S_3}$S3 contribution to each color was determined by using the color filter of the light-receiving element. Because the white-light polarization image includes a lot of information about the illuminated structure, the proposed method should be applied to biomedical sensing and remote sensing.

Design and fabrication of an InGaAs focal plane array integrated with linear-array polarization grating.

Polarization imaging plays a crucial role in modern photonic applications such as remote sensing, material classification, and reconnaissance. A novel InGaAs focal plane array integrated with linear-array polarization grating is proposed and fabricated to meet the practical needs of near-infrared polarization imaging. In order to accurately evaluate the polarization performance of a fabricated detector, the improved test system is used to measure the transmittance and extinction ratio (ER). The results show that the detectivity reaches ${1}.{06}\; \times \;{{10}^{12}}\;{{\rm cm}\cdot{\rm Hz}^{1/2}}/{\rm W}$1.06×1012cm⋅Hz1/2/W, and the operable pixel factor is more than 99.8%. The transmittance of more than 55% and the ER of greater than 21:1 are realized, which indicates that the fabricated detector has excellent capability for near-infrared polarization imaging.

Minimizing the Polarization Leakage of Geometric-phase Coronagraphs with Multiple Grating Pattern Combinations

The design of liquid-crystal diffractive phase plate coronagraphs for ground-based and space-based high-contrast imaging systems is limited by the trade-off between spectral bandwidth and polarization leakage. We demonstrate that by combining phase patterns with a polarization grating (PG) pattern directly followed by one or several separate PGs, we can suppress the polarization leakage terms by additional orders of magnitude by diffracting them out of the beam. Using two PGs composed of a single-layer liquid crystal structure in the lab, we demonstrate a leakage suppression of more than an order of magnitude over a bandwidth of 133 nm centered around 532 nm. At this center wavelength we measure a leakage suppression of three orders of magnitude. Furthermore, simulations indicate that a combination of two multi-layered liquid-crystal PGs can suppress leakage to <10−5 for 1–2.5 μm and <10−10 for 650–800 nm. We introduce multi-grating solutions with three or more gratings that can be designed to have no separation of the two circular polarization states, and offer even deeper suppression of polarization leakage. We present simulations of a triple-grating solution that has <10−10 leakage on the first Airy ring from 450 to 800 nm. We apply the double-grating concept to the Vector-vortex coronagraph of charge 4, and demonstrate in the lab that polarization leakage no longer limits the on-axis suppression for ground-based contrast levels. Lastly, we report on the successful installation and first-light results of a double-grating vector Apodizing Phase Plate pupil-plane coronagraph installed at the Large Binocular Telescope. We discuss the implications of these new coronagraph architectures for high-contrast imaging systems on the ground and in space.

Planar Terahertz Photonics Mediated by Liquid Crystal Polymers

AbstractTerahertz (THz) band is expected to satisfy the ever‐increasing demand for high‐capacity wireless data transfer. Multifunctional photonic devices with compactness and low loss are highly pursued for future THz communications. Here, a strategy for planar THz photonics is proposed that enables free wavefront manipulation with submillimeter thin liquid crystal polymer (LCP) films. Such elements work on the spatial geometric phase modulation, which is accomplished by preprogramming the axis orientations of LCP. The LCP monomers follow the guidance of local photoalignment agent and are further polymerized under UV exposure at the existence of a doped photo‐initializer. Thanks to the high resolution and excellent flexibility of the photopatterning technique, THz elements with versatile functions can be realized. As examples, waveplates, polarization gratings, and lenses, which are suitable for the polarization control, beam deflecting, focusing, or collimating, are demonstrated. Due to the intrinsic flexibility of LCP films, an f‐tunable lens enabled by mechanically induced deformation is exhibited. Specific mode generators for vortices and Bessel beams are also presented, which can function as separate channels for the mode division multiplexing in THz communications. This work provides a robust platform for fabricating integrated, low‐loss, and tunable THz elements suitable for the advanced THz apparatuses.

Full-parallax 3D display using time-multiplexing projection technology

We enhanced the resolution characteristics of a threedimensional (3D) image using time-division multiplexing methods in a full-parallax multi-view 3D display. A time-division light-ray shifting (TDLS) method is proposed that uses two polarization gratings (PGs). As PG changes the diffraction direction of light rays according to the polarization state of the incident light, this method can shift light rays approximately 7 mm in a diagonal direction by switching the polarization state of incident light and adjusting the distance between the PGs. We verified the effect on the characteristics of 3D images based on the extent of the shift. As a result, the resolution of a 3D image with depth is improved by shifting half a pitch of a multi-view image using the TDLS method, and the resolution of the image displayed near the screen is improved by shifting half a pixel of each viewpoint image with a wobbling method. These methods can easily enhance 3D characteristics with a small number of projectors.

Retinal projection type lightguide-based near-eye display with switchable viewpoints.

We present a retinal-projection-based near-eye display with switchable multiple viewpoints by polarization-multiplexing. Active switching of viewpoints is provided by the polarization grating, multiplexed holographic optical elements and polarization-dependent eyepiece lens that can generate one of the dual-divided focus groups according to the pupil position. The lightguide-combined optical devices have a potential to enable a wide field of view (FOV) and short eye relief with compact form factor. Our proposed system can support a pupil movement with an extended eyebox and mitigate image problem caused by duplicated viewpoints. We discuss the optical design for guiding system and demonstrate that proof-of-concept system provides all-in-focus images with 37 degrees FOV and 16 mm eyebox in horizontal direction.

Effect of yttrium oxide nanoparticles on the dielectric properties and dynamics of the formation of holographic polymer–liquid-crystal composites

The electro-optic properties of highly structured polymer–liquid-crystal composites based on acrylate monomers and E7 liquid crystals doped with ${{\rm Y}_2}{{\rm O}_3}$Y2O3 nanoparticles are considered. The influence of nanoparticles on the diffraction efficiency, the driving voltage, the dielectric properties, and the dynamics of the formation of holographic and polarization holographic diffraction gratings inscribed in polymer–liquid-crystal composites is demonstrated. The diffraction efficiency of the doped holographic diffraction gratings decreases, and that of the polarization diffraction gratings increases. Doping with nanoparticles leads to a decrease in driving stresses and increases the formation time and dielectric constant of highly structured polymer–liquid-crystal composites.

一种条形亚波长径向偏振光栅

一种条形亚波长径向偏振光栅

级联液晶偏振光栅的衍射特性分析

级联液晶偏振光栅的衍射特性分析

Optical edge detection with adjustable resolution based on liquid crystal polarization gratings

Optical edge detection, a part of image processing, plays an important role in extracting image information used in optical analog computation. In this Letter, we raise a new way to realize optical edge detection. This design is based on two liquid crystal polarization gratings with a period of 2.2 mm, which function as a spatial differentiator. We experimentally demonstrate broadband optical detection and real-time adjustable resolution. The proposed method takes advantage of the convenience to use, simple fabrication process, and real-time tunable resolution. It may guide more significant applications in the optical field and other practical scenarios like machine vision in computers.

Linear polarization grating combining a circular polarization grating with a special cycloidal diffractive quarter waveplate.

We introduce and demonstrate a switchable novel linear polarization grating (LPG) consisting of a circular polarization grating (CPG) and a special cycloidal diffractive quarter waveplate (CQWP). The CQWP is developed that marvelously matches the polarization-state of beams passing through the CPG. Such an LPG is so polarization-sensitive that it can split an incident linear polarized beam into two proportionally controllable left- or right-handed circularly polarized lights. We establish rigorous simulation model based on finite element method to investigate near-field polarization-state distribution of CPGs. Furthermore, LPGs are demonstrated and the diffraction properties are obtained with simulation and Jones Matrix analysis. The combination of CPGs and CQWPs is achieved with polymerizable liquid crystal. The experimental results of deflection angle and polarization selectivity of LPGs are consistent with those of simulation.