Reconfigurable Polarization Research Articles

Retraction Note: High-gain reconfigurable polarization antenna based on metamaterial array for Terahertz applications

Retraction Note: High-gain reconfigurable polarization antenna based on metamaterial array for Terahertz applications

A High-Performance Antenna With Simultaneous Frequency and Polarization Reconfigurability

A High-Performance Antenna With Simultaneous Frequency and Polarization Reconfigurability

2D Multifunctional Phototransistor Based on MoTe2/Graphene/SnS0.25Se0.75 Heterostructure with High Photogain and Reconfigurable Polarized Detection

Abstract2D van der Waals (vdWs) heterojunctions exhibit facile fabrication process and tunable optoelectronic properties. However, suppressing interfacial charge traps and multifunctional photoresponse remain significant challenges. Here, the study designs a 2D multifunctional phototransistor based on ambipolar MoTe2/graphene (Gr)/p‐type SnS0.25Se0.75 double vdWs vertical heterostructure via alloy engineering. The middle Gr interlayer is pivotal in reducing interfacial charge traps, facilitating vertical photocarrier transportation, and enhancing light absorption coefficient. Under photogating effect, the trapped electrons in SnS0.25Se0.75 promote the photogating effect, resulting in the maximum photogain of 8084 and specific detectivity (D*) of 8.2 × 1012 Jones. Under photoconductive effect, a high responsivity (R) of 36.9 A W−1 and D* of 7.17 × 1011 Jones are achieved. Under photovoltaic effect, the devices exhibit a remarkable R of 501 mA W−1, D* of 1.4 × 1011 Jones. Notably, a self‐driven photocurrent polarized ratio of 8 under 635 nm is achieved because of the anisotropic nature of SnS0.25Se0.75 and the effective double built‐in electric fields. By varying the gate voltage, the polarization ratio can be modulated from 1 to 2.5, enabling reconfigurable polarized‐sensitive detection. Above all, the designed heterojunction with multifunctional and reconfigurable polarization detection.

A novel miniaturized metamaterial inspired frequency reconfigurable antenna with switchable polarization for sub 6 GHz band

Abstract A metamaterial-inspired frequency reconfigurable antenna with switchable polarization realized for 2.4 GHz, 3.5 GHz, and 5.8 GHz frequencies, is reported in this work. Initially, a conventional rectangular patch is designed to resonate at 3.5 GHz. A regular square-shaped SRR (Split Ring Resonator) is a metamaterial-inspired structure that excites additional resonance at 5.8 GHz, without increasing the antenna form factor. Further, a parasitic patch is introduced to create one resonance at 2.4 GHz. Reconfigurability of frequency and polarization is achieved using MPP4203 series PIN diodes. The antenna is simulated using CST Microwave Studio Suite 2019. The designed antenna, characterized by reflection coefficient and bandwidth is analysed for three diode states. The devised antenna operates at 2.4 GHz, 3.5 GHz, and 5.8 GHz, with a maximum bandwidth of 346.2 MHz at the 5.8 GHz frequency band. The radiator outperformed other similar antennas reported in the literature in terms of antenna size, bandwidth, and frequency cum polarization reconfigurability.

A quad-polarization reconfigurable transmitarray antenna with beam-scanning and reconfigurable polarization capabilities

Abstract In this paper, a novel quad-polarized electronically reconfigurable transmitarray antenna(QRTA) is proposed, which can actively switch among four linear-polarization modes and steer beam-scanning in these polarization modes. The QRTA element follows a receiving-transmitting structure. Its receiver or transmitter is composed of four rotationally symmetric patches and a coupling patch. Four rotationally symmetric patches generate x- and y-polarization modes, while coupling patches on the top and bottom layers of the QRTA element are designed to synthesize x-, 45◦-, y-, and 135◦-polarization modes. The QRTA element utilizes a reverse symmetry current method to achieve a 180◦ phase difference in the radiated electromagnetic waves. By manipulating the state of the p-i-n diodes, the proposed QRTA element can achieve four LP functions and a 1-bit phase shift. Based on the proposed novel QRTA element, a 10 × 10 elements QRTA prototype is fabricated and measured. The measured results demonstrate that the proposed QRTA can electronically switch between four LP modes and achieve beam-scanning in those LP modes. The proposed QRTA shows several advantages, including low cost, multi-polarization capability, high gain, and beam-scanning, which means that it can enhance the polarization capabilities and intelligence of wireless communication systems.

Nonvolatile reconfigurable polarization rotator at datacom wavelengths based on a Sb2Se3/Si waveguide.

Silicon photonics has become a key platform for photonic integrated circuits (PICs) due to its high refractive index and compatibility with complementary metal-oxide-semiconductor manufacturing. However, the inherent birefringence in silicon waveguides requires efficient polarization management. Here, we report a reconfigurable polarization rotator (PR) using a Sb2Se3/Si waveguide operating at datacom wavelengths (1310 nm), providing nonvolatile switching with zero static power consumption. The polarization conversion relies on the interference of hybrid electric-magnetic (EH) modes, which can be reconfigured by changing the Sb2Se3 state between amorphous and crystalline. Our experimental device exhibits a polarization conversion efficiency (PCE) and a polarization extinction ratio (PER) as high as -0.08 dB and 17.65 dB, respectively, in a compact footprint of just 21 µm length. Therefore, the proposed reconfigurable PR offers a compact and energy-efficient solution for polarization management in silicon photonics, with potential applications in data communication networks and emerging applications benefiting from polarization information encodings, such as optical neural networks and quantum computing.

Reconfigurable dielectric resonator antenna and array with frequency and polarization flexibility

To implement frequency and polarization hybrid reconfiguration, a 4 × 4 array has been investigated. The radiation elements of the antenna array consist of cylindrical dielectric resonators, Wilkinson power divider, PIN diode, and dielectric substrate. The PIN diode controls the states of each branch in the Wilkinson power divider to achieve frequency and polarization reconfigurability. To verify the feasibility of the design, a fabricated sample of the proposed antenna array has been measured. The results demonstrate that the antenna array can be switched freely between its operating frequencies and polarizations. It operates within a bandwidth of 1.93 to 4.6 GHz for frequency reconfiguration, and three common polarization states—linear polarization, left-handed circular polarization, and right-handed circular polarization—can be continuously tuned from 2.96 to 3.39 GHz.

Transparent and Flexible Antenna With Polarization Reconfigurability Using EGaIn for Wearable Applications

Transparent and Flexible Antenna With Polarization Reconfigurability Using EGaIn for Wearable Applications

Microelectromechanical System-Based Reconfigurable Terahertz Metamaterial for Polarization Filter, Switch, and Logic Modulator Applications.

The terahertz (THz) metamaterials integrated with microelectromechanical systems (MEMS) have led to the realization of dynamic control in amplitude, phase, polarization, and spin angular momentum of the THz wave. In this study, we demonstrate an MEMS-based reconfigurable THz metamaterial (RTM) composed of a split ring resonator (SRR) for real-time modulation of THz wave. By gradually increasing the polarization angle of the incident THz wave, the resonant frequency of SRR switches from 0.74 to 1.16 THz, and the maximum modulation depth is more than 70%. When the MEMS-based RTM is actuated by different DC bias voltages, the polarization-dependent transmission intensity and resonant frequency of the device can be actively tuned. MEMS-based RTM shows logical function characteristics that can be used for logic modulators by performing the driving voltages and polarization states as 2-bit input signals and quantizing the transmission response as "on" and "off" states. The logic gates of "NAND" are at 0.439 THz and "AND" is at 0.732 THz. These results offer potential applications for the proposed MEMS-based RTM in tunable and reconfigurable polarization filters, optical switches, programmable logic modulators, and so on.

Analysis, Design, and Experimental Validation of a High-Isolation, Low-Cross-Polarization Antenna Array Demonstrator for Software-Defined-Radar Applications

In a software-defined radar (SDR) system, most of the signal processing usually implemented in hardware is implemented by software, thus allowing for higher flexibility and modularity compared to conventional radar systems. However, the majority of SDR demonstrators and proofs of concept reported in the open literature so far have been based on simple antenna systems. As a result, the full potentialities of an SDR approach have not been completely exploited yet. In this work, we propose a flexible antenna module to be integrated into an active electronically scanning array (AESA) with controlled sidelobe level over a wide angular range, exhibiting polarization reconfigurability with a low cross-polarization level and high isolation. For this purpose, analytical and numerically efficient techniques for the synthesis of the aperture distribution and the correct evaluation of the radiating features (e.g., beamwidth, pointing angle, sidelobe levels, etc.) are presented in order to grant real-time control of the digital beamforming network. A sub-array module demonstrator is fabricated and measured to corroborate the concept.

Inverse design of two-function transmission-type reconfigurable polarization control metasurfaces based on deep learning

Compared with single-function metasurfaces, the design difficulty of multi-function metasurfaces increases significantly. This paper introduces an inverse design method based on deep learning to address this challenge. By this method, a transmission-type reconfigurable polarization control metasurface (TRPCM) with two functions is rapidly designed. The network model used in the method consists of an electromagnetic parameter reconstruction network model and an inverse prediction network model. The combination of the two models can solve the problem of difficulty in defining high-dimensional inputs in traditional inverse design, and achieve accurate prediction of metasurface structure parameters under given design targets. To optimize the hyperparameters of the neural network model, a genetic algorithm was introduced. To solve the non-uniqueness problem of inverse design, a method for eliminating similar data by calculating Euclidean Distance was introduced. Both schemes further improve the predictive performance of the proposed network model. Finally, six design targets were set based on the TRPCM. The structural parameters of the metasurface were successfully predicted using two neural network models and achieved the required performance. On this basis, a set of parameters was selected for experimental validation. By controlling the ON or OFF of the PIN diodes, the fabricated metasurface achieves two functions: linear-to-circular polarization conversion and linear polarization maintenance in the range of 2–3.6 GHz. Study results show that the inverse design scheme proposed in the paper is feasible and practical for solving the rapid optimization design of complex multi-function metasurfaces.

Concept and Design of a Multi-Polarization Reconfigurable Microstrip Antenna with Symmetrical Biasing Control.

Wireless communication systems have grown rapidly, moving towards being highly compact, intelligent, and flexible to adapt to changing operating requirements. Multifunctional and highly versatile antennas are key in this development to ensure system quality. Reconfigurable antennas, particularly regarding polarization, allow frequency reuse and enable the mitigation of fading effects. This work presents a square microstrip patch antenna operating in the ISM 5.8 GHz band with reconfigurable polarization by controlling its feeding. This antenna has four different states through the application of a symmetrical DC voltage that controls an RF circuit with PIN diodes. As a result, the microstrip patch can operate with three different polarizations: linear polarization and both circular polarizations (right-handed and left-handed). The antenna was fabricated to validate the proposed concept. The good agreement between the measurement and the simulation results was possible to observe regarding its polarization behaviour, impedance adaptation and radiation pattern.

THz graphene-integrated metasurface for electrically reconfigurable polarization conversion.

Terahertz (THz) waves have been widely hailed as a key enabling technology for future sixth generation (6G) wireless networks. Dynamic modulation of their polarization states is of great attraction for high-capacity communications and anisotropic sensing. The development of such technology is, however, still in very early stage owing to the difficulties of realizing electrical reconfigurability for THz devices. Artificially constructed metasurfaces and new nanomaterials, such as graphene, have been shown to provide revolutionary platforms for manipulating and controlling the wave properties, especially at THz frequencies. This work leverages the light-matter interaction in a graphene-integrated metasurface functioning as an electrically reconfigurable THz polarization converter. A novel graphene-gold bilayer topology is applied to construct such a metasurface which enables wide-range electrical tunability of the polarization conversion. Under a y-polarized illumination, the reflected components of x- and y-polarizations are tuned dynamically through an external bias voltage across the metasurface, thereby producing an elliptically polarized wave with tuneable ellipticity and angle. By changing the voltage from 0 V to 12 V, the reflected polarization ellipticity has been tuned from -0.94 to -0.5 at around 240 GHz, featuring linear-to-circular and linear-to-elliptical polarization conversions. Meanwhile, the polarization angle has been modulated from 12° to -23° at around 236 GHz. This work provides an experimentally validated THz graphene-integrated metasurface with wide polarization modulation depths, low biasing voltages and simple configuration. It promises great potential for applications in future THz communications and sensing.

Electrically Active Terahertz Liquid‐Crystal Metasurface for Polarization Vortex Beam Switching

AbstractPolarized vortex waves have attracted widespread attention in investigations of light–matter interactions and the augmentation of information capacity owing to their distinctive characteristics. Nevertheless, the reconfigurable generation of vector beams, especially at terahertz (THz) frequencies, remains challenging. In this study, a tunable THz polarization vortex beam generator based on a liquid‐crystal metasurface is proposed. A unit cell featuring reconfigurable linear polarization selectivity is developed. A general methodology for designing metasurfaces to generate customized and reconfigurable polarization patterns is introduced. Furthermore, the electrically tunable generation of polarized patterns and cylinder vector beams is experimentally demonstrated. The findings of this study can open up opportunities for wireless communication and super‐resolution imaging applications.

Miura origami based reconfigurable polarization converter for multifunctional control of electromagnetic waves

Polarization is one of the basic characteristics of electromagnetic (EM) waves, and its flexible control is very important in many practical applications. At present, most of the multifunction polarization metasurfaces are electrically tunable based on PIN and varactor diodes, which are easy to operate and have strong real-time performance. However, there are still some problems in them, such as few degrees of freedom of planar structure control, complex circuit, bulky sample, and high cost. In view of these shortcomings, this paper proposes a Miura origami based reconfigurable polarization conversion metasurface for multifunctional control of EM waves. The interaction between the electric dipoles is changed by adjusting the folding angle θ, thereby tuning the operating frequency of the polarization conversion and the polarization state of the reflected wave. This mechanical control method brings more degrees of freedom to manipulate EM waves. And the processed sample is with lightweight and low cost. To verify the performance of the proposed origami polarization converter, a Miura origami structure loaded with metal split rings is designed and fabricated. The operating frequency of the structure can be tuned in different folding states. In addition, by controlling the folding angle θ, linear-to-linear and linear-to-circular polarization converters can be realized at different folding states. The proposed Miura origami polarization conversion metasurface provides a new idea for reconfigurable linear polarization conversion and multifunctional devices.

Single-substrate active metasurface for polarization reconfigurable omnidirectional antenna application

In this paper, a wideband polarization reconfigurable omnidirectional antenna (PROA) based on a single-substrate active metasurface is proposed. By controlling the states of the PIN diodes, the antenna can selectively radiate an omnidirectional linearly polarized wave and an omnidirectional circularly polarized wave. The reflection coefficient, axial ratio (AR), radiation pattern, and gain of the proposed antenna have been analyzed from the perspective of simulation and measurement. The measured results show that the PROA has a wide overlapped bandwidth from 2.87 to 3.67 GHz (relative bandwidth 24.46%). To the authors' best knowledge, this is the first reported wideband PROA based on a single-substrate reconfigurable polarization converter. This study not only offers a novel approach to design PROAs, but also greatly reduces the design complexity of the feed source compared with the traditional design method of PROAs.

Wideband Multi-polarization Reconfigurable Antenna based on Non-uniform Polarization Convert AMC Reflector

A novel design of wideband multi-polarization reconfigurable antenna is proposed, based on a non-uniform polarization convert artificial magnetic conductor (AMC) reflector. The proposed antenna consists of a radiator element and an AMC reflector. Firstly, a modified polarization convert AMC reflector is designed. The non-uniform AMC reflector causes an enhancement of 3 dB axial ratio (AR) performance. Secondly, a wideband linearly polarized monopole antenna is presented as the main radiator, utilizing the broadband characteristic of a C-shaped monopole. The polarization reconfigurability of the proposed antenna can be achieved by properly rotating the AMC reflector, which can be switched between linear polarization (LP), left-hand circular polarization (LHCP), and right-hand circular polarization (RHCP). A prototype of the proposed antenna is fabricated and experimented with to validate the theoretical performance. The measured results show a -10 dB impedance bandwidth of 42.7% and 44.4% for LP and CP modes, respectively, and a 3 dB AR bandwidth of 20% for CP modes. In addition, the measured peak gain reaches 8 dBi/dBic. A good agreement is shown between the simulation and measurement, pointing to the good performance of the proposed antenna.

DEFECTED GROUND SQUARE PATCH EDGE TRUNCATED POLARIZATION RECONFIGURABLE ANTENNA

In this paper, a polarization reconfigurable antenna is reported. The proposed antenna operates in linear and circular polarization. Linear polarization is obtained using a square patch antenna and circular polarization is realized by truncating the diagonal corners of the square patch. Wideband circular polarization is obtained using two triangular defects to the ground plane beneath the truncated edge. To implement polarization reconfigurability, two pin diodes are placed on the truncated edges. These pin diodes electronically transform the proposed structure into square or truncated square patches resulting in linear or circular polarizations respectively. The proposed antenna operates in the 4.75 to 3 GHz band with circular polarization and the 4.75 to 1 GHz band with linear polarization. The antenna exhibits a higher peak gain of 7.7 dBi due to a low-loss foam substrate with the main lobe at 0°. A prototype of the antenna is developed and tested.

Broadband Polarization Reconfigurable Frequency-Selective Surface Design

Broadband Polarization Reconfigurable Frequency-Selective Surface Design

Compound reconfigurable symmetric slotted mimo antenna with abs enclosure for indoor wireless applications

This research work reports the Compound Reconfigurable MIMO Antenna (CRMA) utilizing RF PIN diodes for indoor wireless communication applications. The proposed CRMA comprises a quad-symmetric Slotted Radiator (SSR) with a common ground structure. It can perform frequency, polarization and pattern switching at frequency standards such as IEEE 802.11a/b/g/n (2.4/5.5 GHz), IEEE 802.11ax (6 GHz) and 5G/n78 (3.5 GHz). A parasitic element of a modified U-shaped stub is utilized to achieve polarization reconfiguration. Further, to achieve pattern reconfiguration two crossed-shaped slots are implemented. The proposed antenna achieves a bandwidth of 320 MHz at 2.4 GHz, 950 MHz at 3.5 GHz and 1870 MHz at 5.5 GHz. At these resonant frequencies, the antenna is capable of producing both circular and linear polarization with a pattern tilt towards different angular directions such as 30°, 120°, 210°, 300°, 330°, 240°, 150°, 60°. The designed CRMA follows orthogonal orientation and exhibits better diversity performance with ECC < 0.1, DG > 9 dB, TARC < -13 dB and CCL < 0.27 bps/Hz. Also, an Acrylonitrile Butadiene Styrene (ABS) enclosure is designed and fabricated to validate the performance of the antenna with casing, further to analyze the suitability of the antenna for indoor wireless applications