Polarization Of Radiation Research Articles

Metamaterial based stepped microstrip line fed quad-band dual-sense circularly polarized slot antenna for wireless applications

Abstract This research proposes a low-complexity, low-profile square-shaped quad-band dual-sense circularly polarized (CP) perturbed slot antenna with stepped microstrip feed for C-band radar and satellite applications. The proposed antenna is characterized by characteristic mode analysis. The proposed design has a square-shaped slot with diagonally opposite symmetric rectangular corner extensions. Multiband resonance is achieved by exciting the split ring resonator (SRR), cross strips and annular ring structure using the stepped microstrip line-fed slot radiator. The slot antenna and a metallic ring resonate at 1.64 and 8.2 GHz, respectively, showing left-hand circular polarization response, whereas the SRR and cross strips resonate at 3.6 and 6.6 GHz, respectively, exhibiting right-hand circular polarization radiation at these resonance bands. Hence, the proposed design shows quad-band performance with dual-sense CP behavior. Furthermore, the proposed antenna allows for independent tuning of polarization sense at resonance frequencies. The proposed design uses a low-cost FR-4 material as a substrate of dimensions 60 × 60 × 1.6 mm3. The experimentally measured results are in close agreement with the simulated performance parameters of the prototype.

Terahertz Radiation Driven Nonlinear Transport Phenomena in Two-Dimensional Tellurene.

Nonlinear electron transport induced by polarized terahertz radiation is studied in two-dimensional tellurene at room temperature. A direct current, quadratic in the radiation's electric field, is observed. Contributions sensitive to radiation helicity and polarization orientation as well as polarization independent current are found. We show that these contributions can be modified by the magnitude of the external gate potential. We demonstrate that this terahertz-driven electric current arises from the Berry curvature dipole and the side-jump microscopic mechanisms.

Broadband transparency in terahertz free-standing anapole metasurface

We report on an all-dielectric compound anapole metasurface featuring metaatoms based on concentric disks and rings arranged in a square lattice. In this free-standing metasurface, the radiating multipole components cancel each other out in the far field, regardless of the angle of incidence and the polarization of incoming radiation. To demonstrate experimentally a broadband transparency in the terahertz range, we fabricated a silicon metasurface with a total thickness of 60 μm using electron beam lithography and plasma deep etching techniques. Terahertz time-domain spectroscopy experiments revealed that the transmittance spectra measured at various incident angles and polarization states agree well with the respective modeling data. The proposed compound anapole approach has strong application potential for broadband terahertz photonics and sensing devices.

Hybrid Terahertz Emitter for Pulse Shaping and Chirality Control

AbstractTerahertz (THz) radiation (0.3 to 30 THz) fills the crucial gap between the microwave and infrared spectral range. THz technology is important for applications ranging from imaging to telecommunication to biosensing, but these applications often require precise control and manipulation of the THz frequency and polarization state, which typically requires modulators external to the THz source. A hybrid THz emitter that overcomes this limitation by integrating two THz emitters into a single device to enable pulse shaping and chirality control of the emitted radiation without any external components is demonstrated. The two sources are a spintronic emitter (SE) and a semiconductor photoconductive antenna (PCA). The two emitters respond independently to external parameters: the PCA is controlled by the applied bias voltage, while the SE is controlled by the applied magnetic field. Moreover, a dual‐wavelength excitation scheme allows for control of the relative time delay between the THz emission from each constituent. These properties of the hybrid emitter enable precise control of the mixing of the two signals to control the frequency, polarization, and chirality of the overall THz radiation. This on‐chip hybrid emitter thus provides a powerful platform for engineered THz radiation with wide‐ranging potential applications.

Polarization of diffraction radiation of a bunch of charged particles on a metal sphere

Polarization of diffraction radiation of a bunch of charged particles on a metal sphere

Pulsed and Polarized X‐Ray Emission From Neutron Star Surfaces

ABSTRACTThe intense magnetic fields of neutron stars naturally lead to strong anisotropy and polarization of radiation emanating from their surfaces, both being sensitive to the hot spot position on the surface. Accordingly, pulse phase‐resolved intensities and polarizations depend on the angle between the magnetic and spin axes and the observer's viewing direction. In this paper, results are presented from a Monte Carlo simulation of neutron star atmospheres that uses a complex electric field vector formalism to treat polarized radiative transfer due to magnetic Thomson scattering. General relativistic influences on the propagation of light from the stellar surface to a distant observer are taken into account. The paper outlines a range of theoretical predictions for pulse profiles at different X‐ray energies, focusing on magnetars and also neutron stars of lower magnetization. By comparing these models with observed intensity and polarization pulse profiles for the magnetar 1RXS J1708‐40, and the light curve for the pulsar PSR J0821‐4300, constraints on the stellar geometry angles and the size of putative polar cap hot spots are obtained.

Plasmonic antennas based on rectangular graphene nanoribbons with controlled polarization of terahertz and infrared radiation

Background. To develop new terahertz wireless communication systems with high throughput and transmission speeds, such as 6G and above, effective control of the polarization direction of emitted terahertz waves is necessary, but most methods are technologically complex and expensive. The implementation of terahertz antennas and devices based on 2D materials such as graphene solves the problem associated with developing effective control. Aim. Study of the possibility of controlling the polarization of terahertz and IR radiation of plasmonic antennas based on rectangular graphene nanoribbons by changing the chemical potential (application of an external electric field). Methods. This important scientific problem related to the design of terahertz antennas can largely be solved by simulation using the electrodynamic simulation program CST MWS 2023. Results. Plasmon terahertz antennas based on rectangular graphene nanoribbons were chosen as the object of analysis and the possibility of emitting waves of two orthogonal polarizations was shown. Methods have been identified for controlling the polarization of terahertz and IR radiation from such antennas, based on the selection of operating frequencies corresponding to the resonances of the modes of surface plasmon-polaritons, and the application of metallization to the dielectric substrate. Conclusion. The ability to control the polarization of terahertz and IR radiation makes it possible to create both new elements of plasmonic antenna arrays and new communication technologies, including future 6G networks.

Exploring the intermittency of magnetohydrodynamic turbulence by synchrotron polarization radiation

Context. Magnetohydrodynamic (MHD) turbulence plays a critical role in many key astrophysical processes, such as star formation, acceleration of cosmic rays, and heat conduction. However, its properties are still poorly understood. Aims. In this work, we explore how to extract the intermittency of compressible MHD turbulence from synthetic and real observations. Methods. We used three statistical methods, namely the probability distribution function, kurtosis, and scaling exponent of the multi-order structure function, to reveal the intermittency of MHD turbulence. Results. Our numerical results demonstrate that: (1) the synchrotron polarization intensity statistics can be used to probe the intermittency of magnetic turbulence, by which we can distinguish different turbulence regimes; (2) the intermittency of MHD turbulence is dominated by the slow mode in the sub-Alfvénic turbulence regime; and (3) the Galactic interstellar medium (ISM) in the low latitude region corresponds to the sub-Alfvénic and supersonic turbulence regime. Conclusions.We have successfully measured the intermittency of the Galactic ISM from synthetic and realistic observations.

Hanle Effect for Lifetime Determinations in the Soft X-Ray Regime.

By exciting a series of 1s^{2} ^{1}S_{0}→1snp^{1}P_{1} transitions in heliumlike nitrogen ions with linearly polarized monochromatic soft x rays at the Elettra facility, we found a change in the angular distribution of the fluorescence sensitive to the principal quantum number n. In particular it is observed that the ratio of emission in directions parallel and perpendicular to the polarization of incident radiation increases with higher n. We find this n dependence to be a manifestation of the Hanle effect, which served as a practical tool for lifetime determinations of optical transitions since its discovery in 1924. In contrast to traditional Hanle effect experiments, in which one varies the magnetic field and considers a particular excited state, we demonstrate a "soft x-ray Hanle effect" which arises in a static magnetic field but for a series of excited states. By comparing experimental data with theoretical predictions, we were able to determine lifetimes ranging from hundreds of femtoseconds to tens of picoseconds of the 1snp^{1}P_{1} levels, which find excellent agreement with atomic-structure calculations. We argue that dedicated soft x-ray measurements could yield lifetime data that are beyond current experimental reach and cannot yet be predicted with sufficient accuracy.

A wideband dual-circularly polarized traveling wave dielectric resonator antenna array

ABSTRACT In order to meet the demand of high capacity and high speed transmission of satellite communication system, a wideband dual-circularly polarized dielectric resonator antenna (DRA) array is proposed based on the traveling wave principle. Four DRA elements with slot-coupling excitation are sequentially placed on the ground, and the feeding network is designed to realize the two orthogonal circular polarization radiation waves. A notched copper loop (NCL) around the antenna array is adopted to improve the radiation performance. Depending on the operation of the two ports, the NCL generates the induced currents which rotates clockwise/counterclockwise, increasing the axial ratio bandwidth. In order to further improve the gain stability, the copper sheets are embedded on the top surface of each radiation element, and the copper cylinders perturb the internal field distribution of the DRA to introduce higher-order modes. The measurement results show that the left-hand circular polarization and the right-hand circular polarization operating bandwidths are 11.8% (14.97–16.85 GHz) and 12% (14.91–16.82 GHz). The antenna gain achieves 9.0 dBic. This DRA array can be applied for the vehicle mounted RF terminals in satellite communication.

A novel circularly polarized antenna array methodology for early identification of kidney tumors

Kidney cancer is a significant health concern worldwide, with early detection crucial for successful treatment outcomes. Recently, there has been an increasing focus on investigating affordable and non-intrusive methods for detecting cancer at its early stages. This proposed approach delves into the utilization of antenna arrays to identify kidney cancer. Specifically, antenna array with circular polarization has been crafted to identify tumors in the human kidney. This array design has been implemented using CST software, operating at 2.4 GHz. The antenna array having a dimension of 150 mm x 150 mm. The array consists of four-square patches each having a length of 30 mm and the spacing between the patches is preferred to be 20 mm for ensuring the mutual coupling. FR4 substrate is used with the relative permittivity 4.3 and 1.6 mm thickness. The axial ratio of the circularly polarized antenna is 0.9 dB at 2.4 GHz. The reflection coefficient S 11 = –30dB. The renal phantom in humans has been built with the kidney, adrenal gland, ureter, skin, fat, and muscle components to allow for precise simulation. Following that, four stages of cancer tumors were built employing all of the necessary qualities. For every stage of the cancer tumor, the reflection coefficient growth and resonance frequency shift are calculated. For the initial stages, the resonance frequency shift is very low. Consequently, the primary determinant of detection is the rise in S 11 . For 3rd and 4th stages of the tumor, there is a significant change in resonance frequency and increase S 11 , which facilitates identification. The calculated specific absorption rate (SAR) is a smaller amount than the safety thresholds, indicating that using this method is safe. Overall, this research points to a novel, easy-to-use method for kidney cancer screening. This method has the following benefits: it is non-invasive, safe, quick, affordable, and comfortable, and it emits no ionizing radiation during the measurement process. Furthermore, a range of output parameters such as gain, directivity, and polar radiation have been accurately computed.

Магнито-оптическая чувствительность spun-волокна при наличии осевого механического скручивания

The polarization state of light radiation in a spun fiber is one of the factors determining its magneto-optical sensitivity and application in current sensors. In the article, the effect of elastic twisting around the spun fiber axis on the evolution of radiation polarization and the sensitivity of the fiber is studied by modeling. It has been found that twisting effects or other effects that change the spiral pitch lead to degradation of the sensitivity of the spun fiber, and the amount of degradation is determined by the state of polarization at the input of the disturbed fiber section. It is shown that when returning to the non-stressed state with the initial parameters, the sensitivity of the fiber does not recover, but continues to decrease. The importance of minimizing twisted sections in the practical application of spun fiber in a current sensor is noted.

OPTIMASI BANDWIDTH MENGGUNAKAN STUB MATCHING IMPEDANSI PADA RANCANG BANGUN ANTENA MONOPOLE ULTRA-WIDEBAND

The microstrip monopole antenna design study was developed to support Ultra-Wideband (3.1GHz-10.6 GHz) wireless communication technology. This research aims to obtain a minimalist antenna prototype with the ability to operate in the UWB frequency region. Bandwidth optimization is carried out to increase data speed access capacity in wireless communications. The antenna design has two structures in the conductor layer of the RT DUROID 5880 type substrate material. The surface layer structure is a square patch with a transmission line and an impedance stub. For the bottom layer of the substrate, a structure forms the DGS technique. The simulation method is carried out on the antenna design to obtain parameters, such as bandwidth return loss -10dB is 1.29 (fractional) or 9700MHz (absolute) and bandwidth measurement results (absolute) (12,800 MHz-absolute), VSWR (1:2), input impedance at the 3.8GHz frequency (Zin=31.23Ω-j4.12Ω), and the 13.6GHz frequency (Zin=62.93Ω+j28.4Ω). For radiation polarization, the beam width is 116 degrees and the directional strength (Gain) value is 3.15dBi. The entire antenna has the performance characteristics of operating in the Ultra-Wideband spectrum at C-band, X-band and Ku-band frequencies. Omnidirectional polarization, vertical linear polarization, and low gain and minimalist support communication devices.

A Wideband and Compact Millimeter-Wave Antenna Array Fed by Printed Ridge Gap Waveguide for 5G Applications

This paper proposes a printed ridge gap waveguide (PRGW)-based 2 × 2 millimeter-wave antenna array with broad bandwidth and compact aperture. A dual-resonance element consisting of a quarter circular and a quarter annular patch is initially designed. Subsequently, to reduce the cross polarization (XP) radiation and enhance the gain of the proposed antenna, a four-element array with symmetric arrangement is developed, leading to a decline in the normalized XP levels from -4.5 to -18.9 dB and from -4.4 to -18.7 dB in the xoz and yoz planes, respectively. In addition, a pair of parasitic shorted half-circular patches is loaded to improve the antenna gain in the highfrequency range. Finally, a PRGW feeding network is designed and applied to provide differential feeding for the planar array. To validate the reflection and radiation performance, an array prototype is fabricated, and experimental verification is conducted. Measurement results show that a -10-dB impedance bandwidth of 14.3% (26.0–30.0 GHz) is realized for the prototype, and an average realized gain of 9.8 dBi with low XP radiation is achieved by the proposed array.

Highly polarized energetic electrons via intense laser-irradiated tailored targets

A method for the generation of ultrarelativistic electron beams with high spin polarization is put forward, where a tightly focused linearly polarized ultraintense laser pulse interacts with a nonprepolarized transverse-size-tailored solid target. The radiative spin polarization and angular separation is facilitated by the standing wave formed via the incident and reflected laser pulses at the overdense plasma surface. Strong electron heating caused by transverse instability enhances photon emission in the density spikes injected into the standing wave near the surface. Two groups of electrons with opposite transverse polarization emerge, antialigned to the magnetic field, which are angularly separated in the standing wave due to the phase-matched oscillation of the magnetic field and the vector potential. The polarized electrons propelled into the plasma slab are focused at the exit by the self-generated quasistatic fields. Our particle-in-cell simulations demonstrate the feasibility of highly polarized electrons with a single 10 PW laser beam, e.g., with polarization of 60% and charge of 8 pC selected at energy of 200 MeV within 15 mrad angle and 10% energy spread. Published by the American Physical Society 2024

Multifunctional plasmonic metamaterial absorber in the middle infrared range for polarization detection

It is significant to enhance the absorption rate, extend bandwidth and obtain the polarization information of electromagnetic radiation for detection technology. Here, we design and propose the simulation model of broadband and highly polarization-sensitive mid-IR metamaterial absorber by regulating the light field with the plasmonic response. The absorber is based on a simple subwavelength metal grating construction. Its absorption response can cover the 3–5 μm infrared atmospheric window. Detection technology in the mid-IR range has a strong ability to detect objects at high temperatures. In this waveband, the maximum absorption rate can reach more than 98% for TM polarization radiation. In comparison, it is less than 2% for TE polarization radiation, and the extinction ratio of 50 is concurrently achieved. The absorption spectrum can be broadened to the high and low-frequency direction by reasonably adding nanostrips in the unit cell. We also investigate the relationship between incident angle and spectral absorption and clarify the absorption stability of the absorber under oblique incidence. By integrating with the infrared focal plane detector, the device can make the infrared photodetector integrate and develop from a single sensor to multi-dimensional information and promote the development of polarization detector to miniaturization, high efficiency and high integration.

Preparation and Properties Study of CsPbX3@PMMA Luminescent Resin.

Perovskite as an emerging semiconductor luminescent material has attracted widespread attention due to its simple preparation, high luminescence quantum yield, high color purity, tunable spectrum, and ability to cover the entire visible light band. However, due to the influence of water or other highly polar solvents, oxygen, temperature, and radiation, perovskite nanocrystals will aggregate or collapse in the lattice, eventually leading to luminescence quenching. This study starts from the postprocessing of perovskite, uses methyl methacrylate as the monomer and TPO as the photoinitiator, and encapsulates the perovskite powder prepared by the hot injection method through ultraviolet light initiation. A method is proposed to improve the luminescence and crystal structure stability of perovskite. By eliminating the influence of environmental factors on perovskite nanocrystals through the dense structure formed by organic polymers, the resistance of perovskite to strong polar solvents such as water will be greatly improved, and it has great potential in the protection of perovskite. Finally, by changing the proportion of halogen elements in the perovskite resin to change the color of the luminescent resin, a fluorescent coating emitting light in all visible light bands is prepared. Fluorescent coatings are widely used in life and industry fields such as plastics, sol, and paper.

A 350 GHz array of LEKIDs for balloon-borne CMB observations

We present the design, optimization and laboratory characterization of an array of Lumped Element Kinetic Inductance Detectors sensitive in a frequency band centered at 350 GHz. The array consists of 313 feed-horn coupled pixels with resonant frequencies spread over 250 MHz. We present measured yield, quality factor, responsivity, quasiparticle lifetime, noise equivalent power and optical efficiency. The array is a prototype for one of the four frequency bands of OLIMPO, a balloon-borne instrument with a 2.6 m primary mirror proposed for an Antarctic flight to measure the Sunyaev–Zel’dovich effect in clusters of galaxies and their connecting filaments. Similar arrays could also be used with instruments studying the polarization of the cosmic microwave background radiation.

Enhancing three-source cross-modality image fusion with improved DenseNet for infrared polarization and visible light images

The fusion of multi-modal images to create an image that preserves the unique features of each modality as well as the features shared across modalities is a challenging task, particularly in the context of infrared (IR)-visible image fusion. In addition, the presence of polarization and IR radiation information in images obtained from IR polarization sensors further complicates the multi-modal image-fusion process. This study proposes a fusion network designed to overcome the challenges associated with the integration of low-resolution IR, IR polarization, and high-resolution visible (VIS) images. By introducing cross attention modules and a multi-stage fusion approach, the network can effectively extract and fuse features from different modalities, fully expressing the diversity of the images. This network learns end-to-end mapping from sourced to fused images using a loss function, eliminating the need for ground-truth images for fusion. Experimental results using public datasets and remote-sensing field-test data demonstrate that the proposed methodology achieves commendable results in qualitative and quantitative evaluations, with gradient based fusion performance QAB/F, mutual information (MI), and QCB values higher than the second-best values by 0.20, 0.94, and 0.04, respectively. This study provides a comprehensive representation of target scene information that results in enhanced image quality and improved object identification capabilities. In addition, outdoor and VIS image datasets are produced, providing a data foundation and reference for future research in related fields.

Compact dual-band dual sense circularly polarized flexible antenna with polarization rotation metasurface for off-body communications

ABSTRACT A dual-band dual circularly polarised flexible antenna, operating at 3.5 GHz for WiMAX and 5.8 GHz for industrial, scientific, and medical (ISM) bands, is proposed for wearable applications. The antenna design integrates a wideband comb-shaped slotted monopole antenna with a polarisation rotation metasurface (PRMF). The PRMF unit cell consists of a nested split square ring in the corner and a square ring in the centre, where the split square rings facilitate polarisation conversion and the centre square ring enhances the axial ratio. The PRMF integration helps achieve dual circular polarisation (CP) radiation, with left-handed CP in the WiMAX band and right-handed CP in the ISM band. The proposed monopole antenna and PRMF are printed on a conformal polyimide substrate, with a total footprint of 48 × 48 mm2 (0.31λo2). The proposed antenna has a 10 dB impedance bandwidth of 24.9% (3.2 to 4.2 GHz) and 18.9% (5.3 to 6.43 GHz), a 3-dB axial ratio bandwidth of 11.1% and 21.4%, and a peak gain of 6.4 and 6.7 dBic in both bands. Numerical and measured results demonstrate that the antenna performs well in the presence of human body and structural deformations. These attributes make the proposed design highly suitable for off-body wearable applications.