Polaris Flare Research Articles

CO enhancement by magnetohydrodynamic waves

Context. The formation of molecular gas in interstellar clouds is a slow process, but can be enhanced by gas compression. Magneto-hydrodynamic (MHD) waves can create compressed quasi-periodic linear structures, referred to as striations. Striations are observed at the column densities at which the transition from atomic to molecular gas takes place. Aims. We explore the role of MHD waves in the CO chemistry in regions with striations within molecular clouds. Methods. We targeted a region with striations in the Polaris Flare cloud. We conducted a CO J = 2−1 survey in order to probe the molecular gas properties. We used archival starlight polarization data and dust emission maps in order to probe the magnetic field properties and compare against the CO morphological and kinematic properties. We assessed the interaction of compressible MHD wave modes with CO chemistry by comparing their characteristic timescales. Results. The estimated magnetic field is 38–76 µG. In the CO integrated intensity map, we observe a dominant quasiperiodic intensity structure that tends to be parallel to the magnetic field orientation and has a wavelength of approximately one parsec. The periodicity axis is ~17° off from the mean magnetic field orientation and is also observed in the dust intensity map. The contrast in the CO integrated intensity map is ~2.4 times higher than the contrast of the column density map, indicating that CO formation is enhanced locally. We suggest that a dominant slow magnetosonic mode with an estimated period of 2.1–3.4 Myr and a propagation speed of 0.30–0.45 km s−1 is likely to have enhanced the formation of CO, hence created the observed periodic pattern. We also suggest that within uncertainties, a fast magnetosonic mode with a period of 0.48 Myr and a velocity of 2.0 km s−1 could have played some role in increasing the CO abundance. Conclusions. Quasiperiodic CO structures observed in striation regions may be the imprint of MHD wave modes. The Alfvénic speed sets the dynamical timescales of the compressible MHD modes and determines which wave modes are involved in the CO chemistry.

The low cosmic-ray density in the Polaris Flare

We reported the γ-ray observation towards the giant molecular cloud Polaris Flare. Together with the dust column density map, we derived the cosmic ray (CR) density and spectrum in this cloud. Compared with the CR measured locally, the CR density in the Polaris Flare is significantly lower and the spectrum is softer. Such a different CR spectrum reveals either a rather large gradient of CR distribution in the direction perpendicular to the Galactic plane or a suppression of CR inside molecular clouds.

The structure and characteristic scales of molecular clouds

The structure of molecular clouds holds important clues regarding the physical processes that lead to their formation and subsequent dynamical evolution. While it is well established that turbulence imprints a self-similar structure onto the clouds, other processes, such as gravity and stellar feedback, can break their scale-free nature. The break of self-similarity can manifest itself in the existence of characteristic scales that stand out from the underlying structure generated by turbulent motions. In this work, we investigate the structure of the Cygnus-X North and Polaris Flare molecular clouds, which represent two extremes in terms of their star formation activity. We characterize the structure of the clouds using the delta-variance (Δ-variance) spectrum. In the Polaris Flare, the structure of the cloud is self-similar over more than one order of magnitude in spatial scales. In contrast, the Δ-variance spectrum of Cygnus-X North exhibits an excess and a plateau on physical scales of ≈0.5−1.2 pc. In order to explain the observations for Cygnus-X North, we use synthetic maps where we overlay populations of discrete structures on top of a fractal Brownian motion (fBm) image. The properties of these structures, such as their major axis sizes, aspect ratios, and column density contrasts with the fBm image, are randomly drawn from parameterized distribution functions. We are able to show that, under plausible assumptions, it is possible to reproduce a Δ-variance spectrum that resembles that of the Cygnus-X North region. We also use a “reverse engineering” approach in which we extract the compact structures in the Cygnus-X North cloud and reinject them onto an fBm map. Using this approach, the calculated Δ-variance spectrum deviates from the observations and is an indication that the range of characteristic scales (≈0.5−1.2 pc) observed in Cygnus-X North is not only due to the existence of compact sources, but is a signature of the whole population of structures that exist in the cloud, including more extended and elongated structures.

Exposing the plural nature of molecular clouds

We present the Multiscale non-Gaussian Segmentation (MnGSeg) analysis technique. This wavelet-based method combines the analysis of the probability distribution function (PDF) of map fluctuations as a function of spatial scales and the power spectrum analysis of a map. This technique allows us to extract the non-Gaussianities identified in the multiscaled PDFs usually associated with turbulence intermittency and to spatially reconstruct the Gaussian and the non-Gaussian components of the map. This new technique can be applied on any data set. In the present paper, it is applied on a Herschel column density map of the Polaris flare cloud. The first component has by construction a self-similar fractal geometry similar to that produced by fractional Brownian motion (fBm) simulations. The second component is called the coherent component, as opposed to fractal, and includes a network of filamentary structures that demonstrates a spatial hierarchical scaling (i.e. filaments inside filaments). The power spectrum analysis of the two components proves that the Fourier power spectrum of the initial map is dominated by the power of the coherent filamentary structures across almost all spatial scales. The coherent structures contribute increasingly from larger to smaller scales, without producing any break in the inertial range. We suggest that this behaviour is induced, at least partly, by inertial-range intermittency, a well-known phenomenon for turbulent flows. We also demonstrate that the MnGSeg technique is itself a very sensitive signal analysis technique that allows the extraction of the cosmic infrared background (CIB) signal present in the Polaris flare submillimetre observations and the detection of a characteristic scale for 0.1 ≲ l ≲ 0.3 pc. The origin of this characteristic scale could partly be the transition of regimes dominated by incompressible turbulence versus compressible modes and other physical processes, such as gravity.

The relation between the turbulent Mach number and observed fractal dimensions of turbulent clouds

Abstract Supersonic turbulence is a key player in controlling the structure and star formation potential of molecular clouds (MCs). The three-dimensional (3D) turbulent Mach number, $\operatorname{\mathcal {M}}$, allows us to predict the rate of star formation. However, determining Mach numbers in observations is challenging because it requires accurate measurements of the velocity dispersion. Moreover, observations are limited to two-dimensional (2D) projections of the MCs and velocity information can usually only be obtained for the line-of-sight component. Here we present a new method that allows us to estimate $\operatorname{\mathcal {M}}$ from the 2D column density, Σ, by analysing the fractal dimension, $\mathcal {D}$. We do this by computing $\mathcal {D}$ for six simulations, ranging between 1 and 100 in $\operatorname{\mathcal {M}}$. From this data we are able to construct an empirical relation, $\log \operatorname{\mathcal {M}}(\mathcal {D}) = \xi _1(\operatorname{erfc}^{-1} [(\mathcal {D}-\operatorname{\mathcal {D}_\text{min}})/\Omega ] + \xi _2),$ where $\operatorname{erfc}^{-1}$ is the inverse complimentary error function, $\operatorname{\mathcal {D}_\text{min}}= 1.55 \pm 0.13$ is the minimum fractal dimension of Σ, Ω = 0.22 ± 0.07, ξ1 = 0.9 ± 0.1, and ξ2 = 0.2 ± 0.2. We test the accuracy of this new relation on column density maps from Herschel observations of two quiescent subregions in the Polaris Flare MC, ‘saxophone’ and ‘quiet’. We measure $\operatorname{\mathcal {M}}\sim 10$ and $\operatorname{\mathcal {M}}\sim 2$ for the subregions, respectively, which are similar to previous estimates based on measuring the velocity dispersion from molecular line data. These results show that this new empirical relation can provide useful estimates of the cloud kinematics, solely based upon the geometry from the column density of the cloud.

Measuring the filamentary structure of interstellar clouds through wavelets

Context.The ubiquitous presence of filamentary structures in the interstellar medium asks for an unbiased characterization of their properties including a stability analysis.Aims.We propose a novel technique to measure the spectrum of filaments in any two-dimensional data set. By comparing the power in isotropic and anisotropic structures we can measure the relative importance of spherical and cylindrical collapse modes.Methods.Using anisotropic wavelets we can quantify and distinguish local and global anisotropies and measure the size distribution of filaments. The wavelet analysis does not require any assumptions on the alignment or shape of filaments in the maps, but directly measures their typical spatial dimensions. In a rigorous test program, we calibrate the scale dependence of the method and test the angular and spatial sensitivity. We apply the method to molecular line maps from magneto-hydrodynamic (MHD) simulations and observed column-density maps fromHerschelobservations.Results.When applying the anisotropic wavelet analysis to the MHD data, we find that the observed filament sizes depend on the combination of magnetic-field-dominated density–velocity correlations and radiative transfer effects. This can be exploited by observing tracers with different optical depth to measure the transition from a globally ordered large-scale structure to small-scale filaments with entangled field lines. The unbiased view toHerschelcolumn-density maps does not confirm a universal characteristic filament width. The map of the Polaris Flare shows an almost scale-free filamentary spectrum up to the size of the dominating filament of about 0.4 pc. For the Aquila molecular cloud the range of filament widths is limited to 0.05–0.2 pc. The filaments in Polaris show no preferential direction in contrast to the global alignment that we trace in Aquila.Conclusions.By comparing the power in isotropic and anisotropic structures we can measure the relative importance of spherical and cylindrical collapse modes and their spatial distribution.

The role of the magnetic field in a translucent molecular cloud

AbstractTranslucent molecular clouds represent a vastly underexplored regime of cloud evolution in terms of the effect of the magnetic field. Their pristine nature renders them ideal for investigating the initial properties of the magnetic field, prior to the onset of star formation. Using starlight polarimetry, we map the plane-of-sky magnetic field orientation throughout 10 sq. degrees of the Polaris Flare translucent molecular cloud. We provide the first quantitative estimate of the magnetic field strength in this type of system. By combining our measurements with the high-resolution Herschel dust emission map, we find a preferred alignment between filaments and the observed magnetic field. Our results support the presence of a strong magnetic field in this system (Panopoulou et al. 2016).

Statistics of the polarized submillimetre emission maps from thermal dust in the turbulent, magnetized, diffuse ISM

Context. The interstellar medium (ISM) is now widely acknowledged to display features ascribable to magnetized turbulence. With the public release of Planck data and the current balloon-borne and ground-based experiments, the growing amount of data tracing the polarized thermal emission from Galactic dust in the submillimetre provides choice diagnostics to constrain the properties of this magnetized turbulence. Aims. We aim to constrain these properties in a statistical way, focussing in particular on the power spectral index βB of the turbulent component of the interstellar magnetic field in a diffuse molecular cloud, the Polaris Flare. Methods. We present an analysis framework based on simulating polarized thermal dust emission maps using model dust density (proportional to gas density nH) and magnetic field cubes, integrated along the line of sight (LOS), and comparing these statistically to actual data. The model fields are derived from fractional Brownian motion (fBm) processes, which allows a precise control of their one- and two-point statistics. The parameters controlling the model are (1)–(2) the spectral indices of the density and magnetic field cubes, (3)–(4) the RMS-to-mean ratios for both fields, (5) the mean gas density, (6) the orientation of the mean magnetic field in the plane of the sky (POS), (7) the dust temperature, (8) the dust polarization fraction, and (9) the depth of the simulated cubes. We explore the nine-dimensional parameter space through a Markov chain Monte Carlo analysis, which yields best-fitting parameters and associated uncertainties. Results. We find that the power spectrum of the turbulent component of the magnetic field in the Polaris Flare molecular cloud scales with wavenumber as k−βB with a spectral index βB = 2.8 ± 0.2. It complements a uniform field whose norm in the POS is approximately twice the norm of the fluctuations of the turbulent component, and whose position angle with respect to the north-south direction is χ0 ≈−69°. The density field nH is well represented by a log-normally distributed field with a mean gas density 〈nH〉≈40 cm−3, a fluctuation ratio σnH/〈nH〉≈1.6, and a power spectrum with an index βn=1.7−0.3+0.4. We also constrain the depth of the cloud to be d ≈ 13 pc, and the polarization fraction p0 ≈ 0.12. The agreement between the Planck data and the simulated maps for these best-fitting parameters is quantified by a χ2 value that is only slightly larger than unity. Conclusions. We conclude that our fBm-based model is a reasonable description of the diffuse, turbulent, magnetized ISM in the Polaris Flare molecular cloud, and that our analysis framework is able to yield quantitative estimates of the statistical properties of the dust density and magnetic field in this cloud.

The magnetic field and dust filaments in the Polaris Flare

In diffuse molecular clouds, possible precursors of star-forming clouds, the effect of the magnetic field is unclear. In this work we compare the orientations of filamentary structures in the Polaris Flare, as seen through dust emission by Herschel, to the plane-of-the-sky magnetic field orientation ($\rm B_{pos}$) as revealed by stellar optical polarimetry with RoboPol. Dust structures in this translucent cloud show a strong preference for alignment with $\rm B_{pos}$. 70 % of field orientations are consistent with those of the filaments (within 30$^\circ$). We explore the spatial variation of the relative orientations and find it to be uncorrelated with the dust emission intensity and correlated to the dispersion of polarization angles. Concentrating in the area around the highest column density filament, and in the region with the most uniform field, we infer the $\rm B_{pos}$ strength to be 24 $-$ 120 $\mu$G. Assuming that the magnetic field can be decomposed into a turbulent and an ordered component, we find a turbulent-to-ordered ratio of 0.2 $-$ 0.8, implying that the magnetic field is dynamically important, at least in these two areas. We discuss implications on the 3D field properties, as well as on the distance estimate of the cloud.

HERSCHELDUST EMISSION AS A PROBE OF STARLESS CORES MASS: MCLD 123.5+24.9 OF THE POLARIS FLARE

We present newly processed archival Herschel images of molecular cloud MCLD 123.5+24.9 in the Polaris Flare. This cloud contains five starless cores. Using the spectral synthesis code Cloudy, we explore uncertainties in the derivation of column densities, hence, masses of molecular cores from Herschel data. We first consider several detailed grain models that predict far-IR grain opacities. Opacities predicted by the models differ by more than a factor of two, leading to uncertainties in derived column densities by the same factor. Then we consider uncertainties associated with the modified blackbody fitting process used by observers to estimate column densities. For high column density clouds (N(H) $\gg$ 10$^{22}$ cm$^{-2}$), this fitting technique can underestimate column densities by about a factor of three. Finally, we consider the virial stability of the five starless cores in MCLD 123.5+24.9. All of these cores appear to have strongly sub-virial masses, assuming, as we argue, that $^{13}$CO line data provide reliable estimates of velocity dispersions. Evidently, they are not self-gravitating, so it is no surprise that they are starless.

Optical polarization map of the Polaris Flare with RoboPol

The stages before the formation of stars in molecular clouds are poorly understood. Insights can be gained by studying the properties of quiescent clouds, such as their magnetic field structure. The plane-of-the-sky orientation of the field can be traced by polarized starlight. We present the first extended, wide-field ($\sim$10 $\rm deg^2$) map of the Polaris Flare cloud in dust-absorption induced optical polarization of background stars, using the RoboPol polarimeter at the Skinakas Observatory. This is the first application of the wide-field imaging capabilities of RoboPol. The data were taken in the R-band and analysed with the automated reduction pipeline of the instrument. We present in detail optimizations in the reduction pipeline specific to wide-field observations. Our analysis resulted in reliable measurements of 641 stars with median fractional linear polarization 1.3%. The projected magnetic field shows a large scale ordered pattern. At high longitudes it appears to align with faint striations seen in the Herschel-SPIRE map of dust emission (250 $\mu m$), while in the central 4-5 deg$^2$ it shows an eddy-like feature. The overall polarization pattern we obtain is in good agreement with large scale measurements by Planck of the dust emission polarization in the same area of the sky.

FERMILARGE AREA TELESCOPE STUDY OF COSMIC RAYS AND THE INTERSTELLAR MEDIUM IN NEARBY MOLECULAR CLOUDS

We report an analysis of the interstellar gamma-ray emission from the Chamaeleon, R Coronae Australis (R CrA), and Cepheus and Polaris flare regions with the Fermi Large Area Telescope. They are among the nearest molecular cloud complexes, within ~300 pc from the solar system. The gamma-ray emission produced by interactions of cosmic-rays (CRs) and interstellar gas in those molecular clouds is useful to study the CR densities and distributions of molecular gas close to the solar system. The obtained gamma-ray emissivities above 250 MeV are (5.9 +/- 0.1(stat) (+0.9/-1.0)(sys)), (10.2 +/- 0.4(stat) (+1.2/-1.7)(sys)), and (9.1 +/- 0.3(stat) (+1.5/-0.6)(sys)) x10^(-27) photons s^(-1) sr^(-1) H-atom^(-1) for the Chamaeleon, R CrA, and Cepheus and Polaris flare regions, respectively. Whereas the energy dependences of the emissivities agree well with that predicted from direct CR observations at the Earth, the measured emissivities from 250 MeV to 10 GeV indicate a variation of the CR density by ~20% in the neighborhood of the solar system, even if we consider systematic uncertainties. The molecular mass calibrating ratio, Xco = N(H2)/Wco, is found to be (0.96 +/- 0.06(stat) (+0.15/-0.12)(sys)), (0.99 +/- 0.08(stat) (+0.18/-0.10)(sys)), and (0.63 +/- 0.02(stat) (+0.09/-0.07)(sys)) x10^20 H2-molecule cm^(-2) (K km s^(-1))^(-1) for the Chamaeleon, R CrA, and Cepheus and Polaris flare regions, respectively, suggesting a variation of Xco in the vicinity of the solar system. From the obtained values of Xco, the masses of molecular gas traced by Wco in the Chamaeleon, R CrA, and Cepheus and Polaris flare regions are estimated to be ~5x10^3, ~10^3, and ~3.3x10^4 Msolar, respectively. A comparable amount of gas not traced well by standard HI and CO surveys is found in the regions investigated.

Herschel-SPIRE observations of the Polaris flare: Structure of the diffuse interstellar medium at the sub-parsec scale

We present a power spectrum analysis of the Herschel-SPIRE observations of the Polaris flare, a high Galactic latitude cirrus cloud midway between the diffuse and molecular phases. The SPIRE images of the Polaris flare reveal for the first time the structure of the diffuse interstellar medium down to 0.01 parsec over a 10 square degrees region. These exceptional observations highlight the highly filamentary and clumpy structure of the interstellar medium even in diffuse regions of the map. The power spectrum analysis shows that the structure of the interstellar medium is well described by a single power law with an exponent of -2.7 +- 0.1 at all scales from 30" to 8 degrees. That the power spectrum slope of the dust emission is constant down to the SPIRE angular resolution is an indication that the inertial range of turbulence extends down to the 0.01 pc scale. The power spectrum analysis also allows the identification of a Poissonian component at sub-arcminute scales in agreement with predictions of the cosmic infrared background level at SPIRE wavelengths. Finally, the comparison of the SPIRE and IRAS 100 micron data of the Polaris flare clearly assesses the capability of SPIRE in maping diffuse emission over large areas.

From filamentary clouds to prestellar cores to the stellar IMF: Initial highlights from theHerschelGould Belt Survey

We summarize the first results from the Gould Belt survey, obtained toward the Aquila Rift and Polaris Flare regions during the 'science demonstration phase' of Herschel. Our 70-500 micron images taken in parallel mode with the SPIRE and PACS cameras reveal a wealth of filamentary structure, as well as numerous dense cores embedded in the filaments. Between ~ 350 and 500 prestellar cores and ~ 45-60 Class 0 protostars can be identified in the Aquila field, while ~ unbound starless cores and no protostars are observed in the Polaris field. The prestellar core mass function (CMF) derived for the Aquila region bears a strong resemblance to the stellar initial mass function (IMF), already confirming the close connection between the CMF and the IMF with much better statistics than earlier studies. Comparing and contrasting our Herschel results in Aquila and Polaris, we propose an observationally-driven scenario for core formation according to which complex networks of long, thin filaments form first within molecular clouds, and then the densest filaments fragment into a number of prestellar cores via gravitational instability.

AHerschelstudy of the properties of starless cores in the Polaris Flare dark cloud region using PACS and SPIRE

The Polaris Flare cloud region contains a great deal of extended emission. It is at high declination and high Galactic latitude. It was previously seen strongly in IRAS Cirrus emission at 100 microns. We have detected it with both PACS and SPIRE on Herschel. We see filamentary and low-level structure. We identify the five densest cores within this structure. We present the results of a temperature, mass and density analysis of these cores. We compare their observed masses to their virial masses, and see that in all cases the observed masses lie close to the lower end of the range of estimated virial masses. Therefore, we cannot say whether they are gravitationally bound prestellar cores. Nevertheless, these are the best candidates to be potentialprestellar cores in the Polaris cloud region.

Filamentary structures and compact objects in the Aquila and Polaris clouds observed byHerschel

Our PACS and SPIRE images of the Aquila Rift and part of the Polaris Flare regions, taken during the science demonstration phase of Herschel discovered fascinating, omnipresent filamentary structures that appear to be physically related to compact cores. We briefly describe a new multi-scale, multi-wavelength source extraction method used to detect objects and measure their parameters in our Herschel images. All of the extracted starless cores (541 in Aquila and 302 in Polaris) appear to form in the long and very narrow filaments. With its combination of the far-IR resolution and sensitivity, Herschel directly reveals the filaments in which the dense cores are embedded; the filaments are resolved and have deconvolved widths of 35 arcsec in Aquila and 59 arcsec in Polaris (9000 AU in both regions). Our first results of observations with Herschel enable us to suggest that in general dense cores may originate in a process of fragmentation of complex networks of long, thin filaments, likely formed as a result of an interplay between gravity, interstellar turbulence, and magnetic fields. To unravel the roles of the processes, one has to obtain additional kinematic and polarization information; these follow-up observations are planned.

Comparing the statistics of interstellar turbulence in simulations and observations

<i>Context. <i/>Density and velocity fluctuations on virtually all scales observed with modern telescopes show that molecular clouds (MCs) are turbulent. The forcing and structural characteristics of this turbulence are, however, still poorly understood.<i>Aims. <i/>To shed light on this subject, we study two limiting cases of turbulence forcing in numerical experiments: solenoidal (divergence-free) forcing and compressive (curl-free) forcing, and compare our results to observations.<i>Methods. <i/>We solve the equations of hydrodynamics on grids with up to 1024<sup>3<sup/> cells for purely solenoidal and purely compressive forcing. Eleven lower-resolution models with different forcing mixtures are also analysed.<i>Results. <i/>Using Fourier spectra and <i>Δ<i/>-variance, we find velocity dispersion-size relations consistent with observations and independent numerical simulations, irrespective of the type of forcing. However, compressive forcing yields stronger compression at the same rms Mach number than solenoidal forcing, resulting in a three times larger standard deviation of volumetric and column density probability distributions (PDFs). We compare our results to different characterisations of several observed regions, and find evidence of different forcing functions. Column density PDFs in the Perseus MC suggest the presence of a mainly compressive forcing agent within a shell, driven by a massive star. Although the PDFs are close to log-normal, they have non-Gaussian skewness and kurtosis caused by intermittency. Centroid velocity increments measured in the Polaris Flare on intermediate scales agree with solenoidal forcing on that scale. However, <i>Δ<i/>-variance analysis of the column density in the Polaris Flare suggests that turbulence is driven on large scales, with a significant compressive component on the forcing scale. This indicates that, although likely driven with mostly compressive modes on large scales, turbulence can behave like solenoidal turbulence on smaller scales. Principal component analysis of G216-2.5 and most of the Rosette MC agree with solenoidal forcing, but the interior of an ionised shell within the Rosette MC displays clear signatures of compressive forcing.<i>Conclusions. <i/>The strong dependence of the density PDF on the type of forcing must be taken into account in any theory using the PDF to predict properties of star formation. We supply a quantitative description of this dependence. We find that different observed regions show evidence of different mixtures of compressive and solenoidal forcing, with more compressive forcing occurring primarily in swept-up shells. Finally, we emphasise the role of the sonic scale for protostellar core formation, because core formation close to the sonic scale would naturally explain the observed subsonic velocity dispersions of protostellar cores.

FERMIOBSERVATIONS OF CASSIOPEIA AND CEPHEUS: DIFFUSE GAMMA-RAY EMISSION IN THE OUTER GALAXY

We present the analysis of the interstellar γ-ray emission measured by the Fermi Large Area Telescope toward a region in the second Galactic quadrant at 100° ⩽ l ⩽ 145° and −15° ⩽ b ⩽ +30°. This region encompasses the prominent Gould Belt clouds of Cassiopeia, Cepheus, and the Polaris flare, as well as atomic and molecular complexes at larger distances, like that associated with NGC 7538 in the Perseus arm. The good kinematic separation in velocity between the local, Perseus, and outer arms, and the presence of massive complexes in each of them, make this region well suited to probe cosmic rays (CRs) and the interstellar medium beyond the solar circle. The γ-ray emissivity spectrum of the gas in the Gould Belt is consistent with expectations based on the locally measured CR spectra. The γ-ray emissivity decreases from the Gould Belt to the Perseus arm, but the measured gradient is flatter than expectations for CR sources peaking in the inner Galaxy as suggested by pulsars. The XCO = N(H2)/WCO conversion factor is found to increase from (0.87 ± 0.05) × 1020 cm−2 (K km s−1)−1 in the Gould Belt to (1.9 ± 0.2) × 1020 cm−2 (K km s−1)−1 in the Perseus arm. We derive masses for the molecular clouds under study. Dark gas, not properly traced by radio and microwave surveys, is detected in the Gould Belt through a correlated excess of dust and γ-ray emission: its mass amounts to ∼50% of the CO-traced mass.

Intermittency of interstellar turbulence: parsec-scale coherent structure of intense, velocity shear

Guided by the duality of turbulence (random versus coherent we seek coherent structures in the turbulent velocity field of molecular clouds, anticipating their importance in cloud evolution. We analyse a large map (40' by 20') obtained with the HERA multibeam receiver (IRAM-30m telescope) in a high latitude cloud of the Polaris Flare at an unprecedented spatial (11") and spectral (0.05 km/s) resolutions in the 12CO(2-1) line. We find that two parsec-scale components of velocities differing by ~2 km/s, share a narrow interface ($<0.15$ pc) that appears as an elongated structure of intense velocity-shear, ~15 to 30 km/s/pc. The locus of the extrema of line--centroid-velocity increments (E-CVI) in that field follows this intense-shear structure as well as that of the 12CO(2-1) high-velocity line wings. The tiny spatial overlap in projection of the two parsec-scale components implies that they are sheets of CO emission and that discontinuities in the gas properties (CO enrichment and/or increase of gas density) occur at the position of the intense velocity shear. These results disclose spatial and kinematic coherence between scales as small as 0.03 pc and parsec scales. They confirm that the departure from Gaussianity of the probability density functions of E-CVIs is a powerful statistical tracer of the intermittency of turbulence. They disclose a link between large scale turbulence, its intermittent dissipation rate and low-mass dense core formation.

MOLECULAR LINE OBSERVATION TOWARD POLARIS FLARE

In an attempt to investigate star formation activity and statistical properties of clumps of high Galactic latitude clouds (HLCs), we mapped the Polaris Flare region, PF121.3+25.5, in J