Platelet Adhesion Research Articles

Muticomponent Melt‐Electrowritten Vascular Graft to Mimic and Guide Regeneration of Small Diameter Blood Vessels

AbstractCardiovascular disease is a leading cause of morbidity. Current treatments include vessel substitution using autologous/synthetic vascular grafts, but these commonly fail in small diameter applications, largely due to compliance mismatch and clot formation. In this study, a multicomponent vascular graft, that takes inspiration from native vessel architecture, is developed to overcome these limitations. Melt electrowriting (MEW) is used to produce tubular scaffolds with vascular‐mimetic fiber architecture and mechanics, which is combined with a lyophilized fibrinogen matrix with tailored degradation kinetics to generate a hybrid graft. The MEW framework not only contributes to graft mechanics, but also provides contact guidance to direct cell/neotissue orientation and mimic the native tunica media. This construct is further functionalized with heparin, which in combination with the smooth extracellular matrix (ECM) surface, reduced platelet adhesion and clot formation providing a substrate for endothelization, thereby mimicking the function of the intima. Lastly, an outer electrospun layer representing the adventitia is added to improve elasticity and reduce permeability. This graft satisfies ISO implantability requirements, matches the compliance of native vessels, and reestablishes physiological flow with minimal clot formation in a preclinical model. Therefore, this graft represents an innovative off‐the‐shelf alternative to address the unmet clinical need for small‐diameter vascular grafts.

Inhibitory effects of resveratrol on platelet activation and thrombosis in colon cancer through regulation of the MAPK and cGMP/VASP pathways

Thrombosis is the primary cause of death in patients with cancer. Resveratrol inhibits platelet activation, a crucial pathophysiological basis of thrombosis, in healthy individuals. However, its effects and mechanisms of action in patients with colon cancer remain unknown. Here, we investigated the effect of resveratrol on platelet adhesion and aggregation in patients with colon cancer. Through numerous in vitro and in vivo analyses, including flow cytometry, western blotting, ELISA, and immunofluorescence and colon cancer rat models, we demonstrated that resveratrol reduced thrombosis in patients with colon cancer by inhibiting the phosphorylation of the MAPK and activating the cyclic-GMP/vasodilator-stimulated phosphoprotein pathway. These findings demonstrate the potential of resveratrol in reducing thrombosis in patients with colon cancer and could be used to develop novel therapeutic strategies for this condition.

Influence of titanium surface roughness on a nanoscale on the zeta potential and platelet adhesion.

Thromboembolic complications still arise on blood contacting surfaces. Surface charge and topography influence the subsequent deposition of proteins and platelets, potentially leading to thrombi. Research showed a correlation of surface charge and nanoscale roughness, and a negative surface charge as well as a smooth surface finish are associated with lower thrombogenicity. The aim of this study was to compare the platelet adhesion on titanium with different nanoscale roughnesses and to examine if those roughness variations caused a change in surface charge. Titanium samples were polished and roughened to four different nanoscale roughness levels. Platelet adhesion (covered surface area (CSA), N = 8) was tested in flow chambers with human whole blood using fluorescence imaging. ζ-potential was measured over a broad range of pH-values and interpolated to obtain the ζ-potential for pHBlood (7.4). Platelet adhesion tests were evaluated in terms of p-values and the Wilcoxon test effect size and the trend of the ζ-potential at pHBlood and the CSA was compared. Ra-values ranged between 35 (polished) and 156 nm. Regarding platelet adhesion, the polished sample showed the lowest mean CSA with a medium or strong effect size compared to the roughened samples. The interpolated ζ-potentials for pHBlood follow a similar trend as the CSA, with the lowest ζ-potential measured for the polished surface. These findings suggest that the decreasing ζ-potential due to lower nanoscale roughness might be an additional explanation for the improved hemocompatibility besides the smoother topography.

Platelet Adhesion and Activation in an ECMO Thrombosis-on-a-Chip Model.

Use of extracorporeal membrane oxygenation (ECMO) for cardiorespiratory failure remains complicated by blood clot formation (thrombosis), triggered by biomaterial surfaces and flow conditions. Thrombosis may result in ECMO circuit changes, cause red blood cell hemolysis, and thromboembolic events. Medical device thrombosis is potentiated by the interplay between biomaterial properties, hemodynamic flow conditions and patient pathology, however, the contribution and importance of these factors are poorly understood because many in vitro models lack the capability to customize material and flow conditions to investigate thrombosis under clinically relevant medical device conditions. Therefore, an ECMO thrombosis-on-a-chip model is developed that enables highly customizable biomaterial and flow combinations to evaluate ECMO thrombosis in real-time with low blood volume. It is observed that low flow rates, decelerating conditions, and flow stasis significantly increased platelet adhesion, correlating with clinical thrombus formation. For the first time, it is found that tubing material, polyvinyl chloride, caused increased platelet P-selectin activation compared to connector material, polycarbonate. This ECMO thrombosis-on-a-chip model can be used to guide ECMO operation, inform medical device design, investigate embolism, occlusion and platelet activation mechanisms, and develop anti-thrombotic biomaterials to ultimately reduce medical device thrombosis, anti-thrombotic drug use and therefore bleeding complications, leading to safer blood-contacting medical devices.

In vivo biocompatibility of a new hydrophobic coated Al/Al2O3 nanowire surface on stents

BackgroundIntima proliferation and in-stent restenosis is a challenging situation in interventional treatment of small vessel obstruction. Al/Al2O3 nanowires have been shown to accelerate vascular endothelial cell proliferation and migration in vitro, while suppressing vascular smooth muscle cell growth. Moreover, surface modification of Al/Al2O3 nanowires with poly[bis(2,2,2-trifluoromethoxy)phosphazene (PTFEP) coating enables further advantages such as reduced platelet adhesion. Therefore, the study's goal was to compare the biocompatibility of novel Al/Al2O3 + PTFEP coated nanowire bare-metal stents to uncoated control stents in vivo using optical coherence tomography (OCT), quantitative angiography and histomorphometric assessment. Methods15 Al/Al2O3 + PTFEP coated and 19 control stents were implanted in the cervical arteries of 9 Aachen minipigs. After 90 days, in-stent stenosis, thrombogenicity, and inflammatory response were assessed. Scanning electron microscopy was used to analyse the stent surface. ResultsOCT analysis revealed that neointimal proliferation in Al/Al2O3 + PTFEP coated stents was significantly reduced compared to control stents. The neointimal area was 1.16 ± 0.77 mm2 in Al/Al2O3 + PTFEP coated stents vs. 1.98 ± 1.04 mm2 in control stents (p = 0.004), and the neointimal thickness was 0.28 ± 0.20 vs. 0.47 ± 0.10 (p = 0.003). Quantitative angiography showed a tendency to less neointimal growth in coated stents. Histomorphometry showed no significant difference between the two groups and revealed an apparent inflammatory reaction surrounding the stent struts. ConclusionsAt long-term follow-up, Al/Al2O3 + PTFEP coated stents placed in peripheral arteries demonstrated good tolerance with no treatment-associated vascular obstruction and reduced in-stent restenosis in OCT. These preliminary in vivo findings indicate that Al/Al2O3 + PTFEP coated nanowire stents may have translational potential to be used for the prevention of in-stent restenosis.

Effects of Panax notoginseng saponins on alleviating low shear induced endothelial inflammation and thrombosis via Piezo1 signalling

Ethnopharmacological relevancePanax notoginseng saponins (PNS) are the major effective components of Panax notoginseng (burk) F.H.Chen which is one of the classic promoting blood circulation herbs in traditional Chinese medicine. PNS is widely used in China for the treatment of cerebral ischemic stroke. Pathological low shear stress is a causal factor in endothelial inflammation and thrombosis. However, the mechanism of PNS against low shear related endothelial inflammation is still unclear. Aim to the studyThis study aims to investigate the effects of PNS against endothelial inflammation induced by low shear stress and to explore the underlying mechanical and biological mechanisms. Materials and methodsMouse model of carotid partial ligation for inducing low endothelial shear stress was established, the pharmacodynamic effect and mechanism of PNS against endothelial inflammation induced by low shear stress through Piezo1 were explored. Yoda1-evoked Piezo1 activation and expression in human umbilical vein endothelial cells (HUVECs) were determined at static condition. Microfluidic channel systems were used to apply shear stress on HUVECs and Piezo1 siRNA HUVECs to determine PECAM-1, p-YAP and VCAM-1 expression. And platelet rich plasma (PRP) was introduced to low shear treated endothelial cells surface to observe the adhesion and activation by fluorescence imaging and flowcytometry. ResultsPNS attenuated endothelial inflammation and improved blood flow in a reasonable dose response pattern in carotid partial ligation mouse model by influencing Piezo1 and PECAM-1 expression, while suppressing yes-associated protein (YAP) nuclear translocation. We found Piezo1 sensed abnormal shear stress and transduced these mechanical signals by different pathways in HUVECs, and PNS relieved endothelial inflammation induced by low shear stress through Piezo1. We also found Piezo1 signalling has interaction with PECAM-1 under low shear stress, which were involved in platelets adhesion to endothelial cells. Low shear stress increased YAP nuclear translocation and increased VCAM-1 expression in HUVECs which might activate platelets. PNS inhibited low shear induced Piezo1 and PECAM-1 expression and YAP nuclear translocation in HUVECs, furthermore inhibited platelet adhesion and activation on dysfunctional endothelial cells induced by low shear stress. ConclusionPNS ameliorated endothelial inflammation and thrombosis induced by low shear stress through modulation of the Piezo1 channel, PECAM-1 expression, and YAP nuclear translocation. PNS might serve as a potential therapeutic candidate for ameliorating endothelial inflammation induced by abnormal blood shear stress.

Diet and Nutraceuticals for treatment and prevention of primary and secondary stroke: Emphasis on nutritional antiplatelet and antithrombotic agents

Ischemic stroke is a devastating disease that causes morbidity and mortality. Malnutrition following ischemic stroke is common in stroke patients. During the rehabilitation, the death rates of stroke patients are significantly increased due to malnutrition. Nutritional supplements such as protein, vitamins, fish, fish oils, moderate wine or alcohol consumption, nuts, minerals, herbal products, food colorants, marine products, fiber, probiotics and Mediterranean diets have improved neurological functions in stroke patients as well as their quality of life. Platelets and their mediators contribute to the development of clots leading to stroke. Ischemic stroke patients are treated with thrombolytics, antiplatelets, and antithrombotic agents. Several systematic reviews, meta-analyses, and clinical trials recommended that consumption of these nutrients and diets mitigated the vascular, peripheral, and central complications associated with ischemic stroke (Fig. 2). Particularly, these nutraceuticals mitigated the platelet adhesion, activation, and aggregation that intended to reduce the risks of primary and secondary stroke. Although these nutraceuticals mitigate platelet dysfunction, there is a greater risk of bleeding if consumed excessively. Moreover, malnutrition must be evaluated and adequate amounts of nutrients must be provided to stroke patients during intensive care units and rehabilitation periods. In this review, we have summarized the importance of diet and nutraceuticals in ameliorating neurological complications and platelet dysfunction with an emphasis on primary and secondary prevention of ischemic stroke.

Anti-Platelet Activity of Sea Buckthorn Seeds and Its Relationship with Thermal Processing.

Sea buckthorn (Hippophae rhamnoides L.) is a tree or shrub with small, orange berries. Sea buckthorn seeds have shown many properties beneficial to human health, including antioxidant, anti-hypertensive, anti-hyperlipidemic, and retinoprotective activities. Seeds, as a component of food, are often exposed to high temperatures, which can increase or decrease their biological activity. In our previous study, we showed that both raw and roasted sea buckthorn seeds had significant antioxidant activity, which was measured in human plasma in vitro. In this paper, we evaluated the effect of extracts from raw and roasted sea buckthorn seeds on several parameters of hemostasis in vitro, including thrombus formation in full blood (measured by the Total Thrombus formation Analysis System-T-TAS), blood platelet activation (based on the exposition of P-selectin, the active form of GPIIb/IIIa on their surface and platelet-derived microparticles formation), aggregation (measured with impedance aggregometry), adhesion to fibrinogen and collagen, arachidonic acid metabolism in washed platelets stimulated by thrombin, and COX-1 activity. We also measured the levels of free 8-isoprostane in plasma and the total non-enzymatic antioxidant status of plasma. The extract from roasted seeds (50 µg/mL) significantly prolonged the time of occlusion measured by T-TAS-the AUC10 (area under the curve) value was decreased by approximately 18%. Both extracts decreased the exposition of the active form of GPIIb/IIIa on the surface of platelets activated with 10 μM ADP (by 38.4-62.2%) and 20 μM ADP (by 39.7-51.3%). Moreover, the extract from raw seeds decreased the exposition of P-selectin on the surface of platelets stimulated with 20 μM ADP (by 31.2-34.9%). The adhesion of thrombin-stimulated platelets to fibrinogen and collagen was inhibited only by the extract from roasted sea buckthorn seeds (by 20-30%). Moreover, the extract from raw seeds inhibited the level of TBARS (thiobarbituric acid-reactive substances, an indicator of enzymatic peroxidation of arachidonic acid) in washed platelets stimulated with thrombin; the activity of COX-1 was inhibited by both extracts, although the effect of the extract from raw seeds was stronger. These results indicate that sea buckthorn seeds have anti-platelet activity that is not decreased by thermal processing, but more research is needed to determine which exact chemical compounds and mechanisms are responsible for this phenomenon.

Intelligent and biocompatible cellulose aerogels featured with high-elastic and fast-hemostatic for epistaxis and wound healing

Nasal tamponade is a commonly employed and highly effective treatment method for preventing nasal bleeding. However, the current nasal packing hemostatic materials exhibit some limitations, such as low hemostatic efficiency, the potential for causing secondary injury when removed from the nasal cavity, limited intelligence in their design, and an inability to promote the healing of nasal mucosa wounds. Herein, we report the fabrication of a smart cellulose aerogel through the covalent cross-linking of carboxymethyl cellulose (CMC) macromolecules, while incorporating one-dimensional cellulose nanofibers (CNF) and two-dimensional MXene as reinforcing network scaffolds and conductive fillers. The abundant hydrogen and ether bonds in aerogels make them possess high elasticity in both dry and wet states, which can be compressed 100 times at 90 % deformation with a stress loss of <10 % under water. The highly elastic aerogels can be filled into the narrow nasal passages, pressuring the capillaries and reducing the amount of bleeding. Moreover, the strong interface between aerogels and blood can promote red blood cell aggregation, platelet adhesion and activation, activate intrinsic coagulation pathway and accelerate blood coagulation, resulting in excellent hemostatic ability. Furthermore, the aerogels exhibit excellent hemocompatibility and cytocompatibility, making them suitable for wound healing and capable of fully healing wounds within 15 days. Notably, the presence of MXene causes the aerogels to form a conductive network when exposed to blood, enabling them to perform real-time hemostatic monitoring without removing the dressing. This innovative biomedical aerogel, prepared from natural materials, shows excellent potential for applications in rapid nasal hemostasis.

Preparation of an anticoagulant polyethersulfone membrane by immobilizing FXa inhibitors with a polydopamine coating

Anticoagulation treatment for patients with high bleeding risk during hemodialysis is challenging. Contact between the dialysis membrane and the blood leads to protein adsorption and activation of the coagulation cascade reaction. Activated coagulation Factor X (FXa) plays a central role in thrombogenesis, but anticoagulant modification of the dialysis membrane is rarely targeted at FXa. In this study, we constructed an anticoagulant membrane using the polydopamine coating method to graft FXa inhibitors (apixaban and rivaroxaban) on the membrane surface. Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and atomic force microscopy (AFM) were used to characterize the membranes. The apixaban- and rivaroxaban-modified membranes showed lower water contact angles, decreased albumin protein adsorption, and suppressed platelet adhesion and activation compared to the unmodified PES membranes. Moreover, the modified membranes prolonged the blood clotting times in both the intrinsic and extrinsic coagulation pathways and inhibited FXa generation and complement activation, which suggested that the modified membrane enhanced biocompatibility and antithrombotic properties through the inhibition of FXa. Targeting FXa to design antithrombotic HD membranes or other blood contact materials might have great application potential.

Electrospun polyhedral oligomeric silsequioxane-poly(carbonate-urea) urethane for fabrication of hemocompatible small-diameter vascular grafts with angiogenesis capacity

The clinical utility of small-diameter vascular grafts (SDVGs) is limited due to the possibility of thrombosis and intimal hyperplasia. These features can delay the development of a functional endothelial cell (EC) monolayer on the luminal surface of grafts. Therefore, the development and fabrication of vascular grafts (VGs) with comparable extracellular matrix (ECM) functions are mandatory to elicit hemocompatible confluent EC monolayers, and angiogenesis behavior inside the body. To promote the interactions between ECs and the surface of electrospun polyacrylic acid-grafted polyhedral oligomeric silsesquioxane-poly(carbonate-urea)-urethane (PAAc-POSS-PCUU), in this research, the surface of nanofibers was modified by covalently immobilizing extracted soluble proteins from aorta (ESPA) using EDC/NHS chemistry. The ATR-FTIR spectroscopy, WCA, and SEM microscopy confirmed the binding of acrylic acid and soluble vascular proteins on the surface of electrospun fibers. The PAAc-POSS-PCUU nanofibers and engineered biomimetic Pro-PAAc-POSS-PCUU nanofibers exhibited excellent biocompatibility indicated by increased survival rate (p < 0.05). Western blotting revealed the increase of VE-cadherin, Tie-2, vWF, and VEGFR-2 in HUVECs after being plated on PAAc-POSS-PCUU and Pro-PAAc-POSS-PCUU scaffolds, indicating appropriate angiogenesis behavior (p < 0.05). Besides, the antioxidant capacity was induced by the increase of SOD and GPx activity (p < 0.05). Additionally, blood compatibility tests revealed that Pro-PAAc-POSS-PCUU nanofibers accelerate the formation of a single EC layer without hemolysis and platelet adhesion. Taken together, Pro-PAAc-POSS-PCUU nanofibers exhibited excellent blood compatibility, and angiogenesis behavior, making them a promising candidate for clinical applications.

Stability Enhancement by Hydrophobic Anchoring and a Cross-Linked Structure of a Phospholipid Copolymer Film for Medical Devices.

Surface modification using zwitterionic 2-methacryloyloxyethylphosphorylcholine (MPC) polymers is one of the most reasonable ways to prepare medical devices that can suppress undesired biological reactions such as blood coagulation. Usable MPC polymers are hydrophilic and water soluble, and their surface modification strategy involves exploiting the copolymer structures by adding physical or chemical bonding moieties. In this study, we developed copolymers composed of MPC, hydrophobic anchoring moiety, and chemical cross-linking unit to clarify the role of hydrophobic interactions in achieving biocompatible and long-term stable coatings. The four kinds of MPC copolymers with cross-linking units, such as 3-methacryloxypropyl trimethoxysilane (MPTMSi), and four different hydrophobic anchoring moieties, such as 3-(methacryloyloxy)propyltris(trimethylsiloxy)silane (MPTSSi) named as PMMMSi, n-butyl methacrylate (BMA) as PMBSi, 2-ethylhexyl methacrylate (EHMA) as PMESi, and lauryl methacrylate as PMLSi, were synthesized and coated on polydimethylsiloxane, polypropylene (PP), and polymethyl pentene. These copolymers were uniformly coated on the substrate materials PP and poly(methyl pentene) (PMP), to achieve hydrophilic and electrically neutral coatings. The results of the antibiofouling test showed that PMBSi repelled the adsorption of fluorescence-labeled bovine serum albumin the most, whereas PMLSi repelled it the least. Notably, all four copolymers suppressed platelet adhesion similarly. The variations in protein adsorption quantities among the four copolymer coatings were attributed to their distinct swelling behaviors in aqueous environments. Further investigations, including 3D scanning force microscopy and neutron reflectivity measurements, revealed that the PMLSi coating exhibited a higher water intake under aqueous conditions in comparison to the other coatings. Consequently, all copolymer coatings effectively prevented the invasion of platelets but the proteins penetrated the PMLSi network. Subsequently, the dynamic stability required to induce shear stress was evaluated using a circulation system. The results demonstrated that the PMMMSi and PMLSi coatings on PMP and PP exhibited exceptional platelet repellency and maintained high stability during circulation. This study highlights the potential of hydrophobic moieties to improve hemocompatibility and stability, offering potential applications in medical devices.

In vitro biocompatibility analysis of protein-resistant amphiphilic polysulfobetaines as coatings for surgical implants in contact with complex body fluids.

The fouling resistance of zwitterionic coatings is conventionally explained by the strong hydrophilicity of such polymers. Here, the in vitro biocompatibility of a set of systematically varied amphiphilic, zwitterionic copolymers is investigated. Photocrosslinkable, amphiphilic copolymers containing hydrophilic sulfobetaine methacrylate (SPe) and butyl methacrylate (BMA) were systematically synthesized in different ratios (50:50, 70:30, and 90:10) with a fixed content of photo-crosslinker by free radical copolymerization. The copolymers were spin-coated onto substrates and subsequently photocured by UV irradiation. Pure pBMA and pSPe as well as the prepared amphiphilic copolymers showed BMA content-dependent wettability in the dry state, but overall hydrophilic properties a fortiori in aqueous conditions. All polysulfobetaine-containing copolymers showed high resistance against non-specific adsorption (NSA) of proteins, platelet adhesion, thrombocyte activation, and bacterial accumulation. In some cases, the amphiphilic coatings even outperformed the purely hydrophilic pSPe coatings.

New insights of glycoprotein Ib-IX-V complex organization and glycoprotein Ibα in platelet biogenesis.

Glycoprotein (GP) Ib-IX-V, a platelet surface receptor that plays a critical role in platelet adhesion and platelet-mediated immune responses, consists of GPIbα, GPIbβ, GPIX, and GPV in a stoichiometry of 2 : 4 : 2 : 1. Forming a complex is essential for GPIb-IX-V to function. GPIb-IX-V also plays an important role in platelet biogenesis by regulating the number and size of platelets. Yet how GPIb-IX-V regulates platelet biogenesis remains elusive. This review will summarize recent findings in the complex organization of GPIb-IX-V and its role in platelet biogenesis. Proteomics studies suggest that GPIbα, GPIbβ, GPIX, and GPV form the complex in a ratio of 1 : 2 : 1 : 1, which is supported by analysis of molecular weight of GPIb-IX-V and GPIb-IX and the structure of entire GPIb-IX-V. To activate platelets, GPIbα requires binding of CLEC-2 to trigger signals. Furthermore, disrupting the GPIbα anchorage to filamin A causes defects in platelet budding away from proplatelets leading to giant platelets and a low platelet count. New studies challenge the traditional model for the organization of GPIb-IX-V as a complex and indicate the role of GPIb-IX-V in platelet production. Those studies provide insights for GPIb-IX-V in the regulation of platelet activation and platelet biogenesis.

Tailored endothelialization enabled by engineered endothelial cell vesicles accelerates remodeling of small-diameter vascular grafts

Current gold standard for the replacement of small-diameter blood vessel (ID < 4 mm) is still to utilize the autologous vessels of patients due to the limitations of small-diameter vascular grafts (SDVG) on weak endothelialization, intimal hyperplasia and low patency. Herein, we create the SDVG with the tailored endothelialization by applying the engineered endothelial cell vesicles to camouflaging vascular grafts for the enhancement of vascular remodeling. The engineered endothelial cell vesicles were modified with azide groups (ECVs-N3) through metabolic glycoengineering to precisely link the vascular graft made of PCL-DBCO via click chemistry, and thus fabricating ECVG (ECVs-N3 modified SDVG), which assists inhibition of platelet adhesion and activation, promotion of ECs adhesion and enhancement of anti-inflammation. Furthermore, In vivo single-cell transcriptome analysis revealed that the proportion of ECs in the cell composition of ECVG surpassed that of PCL, and the tailored endothelialization enabled to convert endothelial cells (ECs) into some specific ECs clusters. One of the specific cluster, Endo_C5 cluster, was only detected in ECVG. Consequently, our study integrates the engineered membrane vesicles of ECVs-N3 from native ECs for tailored endothelialization on SDVG by circumventing the limitations of living cells, and paves a new way to construct the alternative endothelialization in vessel remodeling following injury.

Optimizing small-diameter vascular grafts: Harnessing the power of recombinant human type III collagen (rhCOLIII) for enhanced antiplatelet and endothelialization performance

Small-diameter vascular grafts hold great promise as potential substitutes for coronary and peripheral arteries. However, their clinical availability is hindered by thrombogenicity and intimal hyperplasia. Herein, bilayer vascular grafts with enhanced antithrombogenicity and endothelialization were developed by two-step electrospinning technology. First, the well-designed recombinant human type III collagen (rhCOLIII), featuring numerous triplets that promote cell adhesion while excluding sequences prone to platelet adhesion and activation, was composited with poly(L-lactide-co-ε-caprolactone) (PLCL) to create a bioactive inner layer. Afterward, a pure PLCL outer layer with exceptional elasticity was constructed to provide mechanical support. In vitro antiplatelet and cytocompatibility experiments revealed that the graft containing 60% rhCOLIII exhibited almost no platelet adhesion, while the number of adhered endothelial cells increased approximately 20 times compared to pure PLCL. Furthermore, Beagle dog femoral artery implantation models demonstrated that the rhCOLIII-modified grafts underwent endothelialization within three months, contributing to the patency of grafts. The potential mechanism for enhanced endothelialization by rhCOLIII was investigated through transcriptome sequencing and verified by an integrated analysis of gene and protein expression. The cell-affinity units, Gly-Glu-Arg (GER) and Gly-Glu-Lys (GEK) triplets, present in rhCOLIII contribute to initial adhesion of endothelial cells. Following adhesion, they may upregulate the expression of integrins αVβ8 on the cell surface, thereby further enhancing cell adhesion. Subsequently, the FAK/PI3K/AKT pathway within endothelial cells may also be activated to promote cell proliferation.

Evaluating the osteogenic properties of polyhydroxybutyrate-zein/multiwalled carbon nanotubes (MWCNTs) electrospun composite scaffold for bone tissue engineering applications

In this investigation, the electrospun nanocomposite scaffolds were developed utilizing poly-3-hydroxybutyrate (PHB), zein, and multiwalled carbon nanotubes (MWCNTs) at varying concentrations of MWCNTs including 0.5 and 1 wt%. Based on the SEM evaluations, the scaffold containing 1 wt% MWCNTs (PZ-1C) exhibited the lowest fiber diameter (384 ± 99 nm) alongside a suitable porosity percentage. The presence of zein and MWCNT in the chemical structure of the scaffold was evaluated by FTIR. Furthermore, TEM images revealed the alignment of MWCNTs with the fibers. Adding 1 % MWCNTs to the PHB-zein scaffold significantly enhanced tensile strength by about 69 % and reduced elongation by about 31 %. Hydrophilicity, surface roughness, crystallinity, and biomineralization were increased by incorporating 1 wt% MWCNTs, while weight loss after in vitro degradation was decreased. The MG-63 cells exhibited enhanced attachment, viability, ALP secretion, calcium deposition, and gene expression (COLI, RUNX2, and OCN) when cultivated on the scaffold containing MWCNTs compared to the scaffolds lacking MWCNTs. Moreover, the study found that MWCNTs significantly reduced platelet adhesion and hemolysis rates below 4 %, indicating their favorable anti-hemolysis properties. Regarding the aforementioned results, the PZ-1C electrospun composite scaffold is a promising scaffold with osteogenic properties for bone tissue engineering applications.

Effect of Diminazene Aceturate, an ACE2 activator, on platelet CD40L signaling induced glial activation in rat model of hypertension

Hypertension causes platelet activation and adhesion in the brain resulting in glial activation and neuroinflammation. Further, activation of Angiotensin-Converting Enzyme 2/Angiotensin (1–7)/Mas Receptor (ACE2/Ang (1–7)/MasR) axis of central Renin-Angiotensin System (RAS), is known to reduce glial activation and neuroinflammation, thereby exhibiting anti-hypertensive and anti-neuroinflammatory properties. Therefore, in the present study, the role of ACE2/Ang (1–7)/MasR axis was studied on platelet-induced glial activation and neuroinflammation using Diminazene Aceturate (DIZE), an ACE2 activator, in astrocytes and microglial cells as well as in rat model of hypertension. We found that the ACE2 activator DIZE, independently of its BP-lowering properties, efficiently prevented hypertension-induced glial activation, neuroinflammation, and platelet CD40-CD40L signaling via upregulation of ACE2/Ang (1–7)/MasR axis. Further, DIZE decreased platelet deposition in the brain by reducing the expression of adhesion molecules on the brain endothelium. Activation of ACE2 also reduced hypertension-induced endothelial dysfunction by increasing eNOS bioavailability. Interestingly, platelets isolated from hypertensive rats or activated with ADP had significantly increased sCD40L levels and induced significantly more glial activation than platelets from DIZE treated group. Therefore, injection of DIZE pre-treated ADP-activated platelets into normotensive rats strongly reduced glial activation compared to ADP-treated platelets. Moreover, CD40L-induced glial activation, CD40 expression, and NFкB-NLRP3 inflammatory signaling are reversed by DIZE. Furthermore, the beneficial effects of ACE2 activation, DIZE was found to be significantly blocked by MLN4760 (ACE2 inhibitor) as well as A779 (MasR antagonist) treatments. Hence, our study demonstrated that ACE2 activation reduced the platelet CD40-CD40L induced glial activation and neuroinflammation, hence imparted neuroprotection.

Reduced platelet activation and thrombus formation in male transgenic model mice of Alzheimer's disease suggests early sex-specific differences in platelet pathophysiology

Alzheimer's disease (AD) is the most common form of dementia and characterized by extracellular amyloid-β (Aβ) plaques, intracellular neurofibrillary tau tangles and neurodegeneration. Over 80 % of AD patients also exhibit cerebral amyloid angiopathy (CAA). CAA is a cerebrovascular disease caused by deposition of Aβ in the walls of cerebral blood vessels leading to vessel damage and impairment of normal blood flow. To date, different studies suggest that platelet function, including activation, adhesion and aggregation, is altered in AD due to vascular Aβ deposition. For example, the transgenic AD model mice APP23 mice that exhibit CAA and parenchymal Aβ plaques, show pre-activated platelets in the blood circulation and increased platelet integrin activation leading to a pro-thrombotic phenotype in these mice late stages of AD. However, it is still an open question whether or not platelets exhibit changes in their activation profile before they are exposed to vascular Aβ deposits. Therefore, the present study examined platelets from middle-aged transgenic APP23 mice at the age of 8–10 months. At this age, APP23 mice show amyloid plaques in the brain parenchyma but not in the vasculature. Our analyses show that these APP23 mice have unaltered platelet numbers and size, and unaltered surface expression of glycoproteins. However, the number of dense granules in transgenic platelets was increased while the release was unaltered. Male, but not female APP23 mice, exhibited reduced platelet activation after stimulation of the thrombin receptor PAR4 and decreased thrombus stability on collagen under flow conditions ex vivo compared to control mice. In an arterial thrombosis model in vivo, male APP23 mice showed attenuated occlusion of the injured artery compared to controls. These findings provide clear evidence for early changes in platelet activation and thrombus formation in male mice before development of overt CAA. Furthermore, reduced platelet activation and thrombus formation suggest sex-specific differences in platelet physiology in AD that has to be considered in future studies of platelets and their role in AD.

Argatroban- and copper-modified polymers with improved thromboresistance and antimicrobial properties

This paper describes a novel approach the development of biocompatible polyvinyl chloride (PVC) and polyurethane (PU) polymers, modified with copper (II) ions followed by the immobilisation the thrombin inhibitor argatroban (AG) using dopamine chemistry. The surface loading of the immobilised AG was 6.06 µg cm−2 on PVC and 6.66 µg cm−2 on PU, confirmed by FTIR and inhibitor concentration measurements. Both AG/Cu-modified polymers produced NO by catalytically decomposing S-nitrosothiol, reaching NO levels in plasma of 0.59 × 10–10molcm-2min-1\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ ext{mol} \\, {\ ext{cm}}^{-2} \\, {\ ext{min}}^{-1}$$\\end{document} for AG/Cu-PVC and 0.51 × 10–10molcm-2min-1\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\ ext{mol} \\, {\ ext{cm}}^{-2} \\, {\ ext{min}}^{-1}$$\\end{document} for AG/Cu-PU, matching endothelial cell-produced physiological levels. This modification improved the haemocompatibility of the polymers through thrombin inhibition and reduced platelet aggregation and adhesion. Additionally, both modified polymers inhibited Staphylococcus aureus adhesion, growth and viability, confirming their acquired antibacterial properties. Antibacterial activity against Escherichia coli was also observed. These results demonstrate that modifying PVC and PU surfaces with copper (II) and AG produced materials with dual antithrombotic and antibacterial functions.Graphical abstract