Plastic Toys Research Articles

Microplastic and human health with focus on pediatric well-being: a comprehensive review and call for future studies.

Although humans are highly dependent on plastics from infancy to adolescence, these materials can degrade into ubiquitous microplastics (MPs) that affect individuals at every stage of life. However, information on the sources, mechanisms, detection techniques, and detrimental effects of MPs on children's health from infancy to adolescence is limited. Hence, here we identified and reviewed original research papers published in 2017-2023 across 11 database categories in PubMed, Google Scholar, Scopus, and Web of Science to improve our understanding of MPs with a focus on pediatric well-being. These studies found that milk and infant formulas are common sources of MP exposure in infants. Infant formula is the dominant source of MPs in babies, while plastic toys are a common source of MPs in toddlers. Adolescents are frequently exposed to MPs through the consumption of food contaminated with MPs and the use of plastics in food packaging. Water and air are sources of MP exposure in children from infancy through adolescence. This study thoroughly summarized how MP exposure in children of all ages causes cell damage and leads to adverse health effects such as cancer. With appropriate authorization from the relevant authorities, small amounts of human biological samples (10 g of feces) were collected from volunteers to assess the amounts of MPs in children with the aim of promoting pediatric well-being. The samples were then treated with Fenton's reagent, stored in glass jars, and filtered through nonplastic filters. Finally, MPs in children were quantified using stereomicroscopy and characterized using micro-Fourier transform infrared spectroscopy.

Extremely high levels of PBDEs in children’s toys from European markets: causes and implications for the circular economy

BackgroundWith the high influx of low-cost plastic toys on the market, there is growing concern about the safety of such toys. Some of these plastic toys contains hazardous chemicals like polybrominated diphenyl ethers (PBDEs) due to the use of recycled plastics in new toy manufacturing. Here, we investigated if toys marketed in Europe are compliant with EU directives to assess the safety of currently used children's toys and identify implications of PBDE content in toys.ResultsEighty-four toys purchased from international toy retailers were screened for bromine using X-ray fluorescence (XRF), and 11 of those with bromine content higher than 500 µg/g were analyzed for ten PBDEs using GC–HRMS. PBDEs were detected in all 11 toys. Ʃ10PBDE concentrations ranged up to 23.5 mg/g (with a median concentration of 8.61 mg/g), with BDE-209 being the most abundant compound (4.40 mg/g). Eight samples exceeded the EU’s Low POP Content Limit (LPCL) of 500 µg/g for the Ʃ10PBDEs by 6–47 times and the Unintentional Trace Contaminant (UTC) limits of 10 µg/g for Deca-BDE by 12–800 times.ConclusionsPBDEs were up to percent levels, suggesting direct recycling of flame retarded plastic, e.g., e-waste plastics, into toy components. This is a call for concern and requires intervention from all stakeholders involved in the toy market. Overall, the occurrence of non-compliant toys in the EU market, as indicated in this study is primarily attributed to gaps in regulations, inadequate legislation for recycled plastics, the rise of online sales, complexities in global and national supply chains, and economic challenges. Failure to address these issues will hinder the efforts of the plastics industry to transition into a circular economy. This suggests that more actions are needed to address gaps in cross-border enforcement, and stricter sanctions are required for toy manufacturers who fail to adhere to regulations and safety standards.

Defining greener, healthier and more sustainable toys: A case study of L.O.L. Surprise!

This study aims at reflecting on the potential risks of plastic toys for children's health and the environment, from an interdisciplinary approach. At the same time, it aims at contributing with a definition of greener, healthier and more sustainable toys that offer opportunities and alternatives to promote educational, humane, ecological, safer, and healthier play, designed to be benign or free from material or immaterial risks. This is achieved by adopting the main characteristics of Sustainable Chemistry and Critical Education and through the case study of the “L.O.L. Surprise! doll and its plastic world”. The study critically examines the L.O.L. Surprise! doll, encapsulated in layers of plastic and heavily marketed, and shows how its design and promotion are in stark contrast to the principles of greener, healthier and more sustainable toys.

Reviewing the current state of legacy POP-brominated flame retardants in plastic childcare products and toys: a scoping review protocol

BackgroundDue to their adverse environmental and health impacts, brominated flame retardants (BFRs) are listed in Annex A of the Stockholm Convention for global elimination of production and use. Their health impacts include endocrine disruption, cancer, reproductive effects, and neurobehavioral and developmental disorders in children. Emerging literature suggests that legacy POP-BFRs are increasingly found in consumer products, including those used for and by children. The presence of legacy POP-BFRs in children’s products is a big concern. Children are more vulnerable to chemical exposure risks than adults because their bodies are still developing and fragile. The rising problem is contributed to by the global push towards a circular economy that encourages responsible production and consumption by practising the recycling of waste materials. Waste materials such as electronic and electrical equipment plastics often contain POP-BFRs. POP-BFRs in waste materials are transferred into new products through recycling. The recycled products have become a potential source of exposure to legacy POP-BFRs for vulnerable populations, particularly children. Our scoping review aims to map and summarise the emerging literature. This information is needed to inform evidence-based policies to protect children from toxic exposures.MethodsOur scoping review will follow a methodological framework proposed by Arksey and O’Malley. Peer-reviewed and grey literature on the topic will be retrieved from electronic databases and other relevant sites. Two reviewers will screen titles and abstracts, followed by a full-text review of studies for eligibility based on the established inclusion and exclusion criteria. Data will be extracted, and findings will be mapped in a table according to study settings, types of children’s products tested, and concentration of legacy POP-BFRs in contaminated products. A map chart will be created to display how contaminated products are spread globally.DiscussionBecause of their unique vulnerabilities, children continue to suffer disproportionate exposures to toxic chemicals compared to adults. Information on potential exposures, particularly for children, is crucial to make evidence-based policies. We intend to map and summarise the emerging literature on legacy POP-BFRs in children's products. Findings will be disseminated to relevant stakeholders through publishing in a peer-reviewed scientific journal and policy briefs.Systematic review registrationThe protocol is registered with the Open Science Framework (https://doi.org/10.17605/OSF.IO/7KDE5).

Determination of Metals in Children’s Plastic Toys using Inductively Coupled Plasma Optical Emission Spectrometry

Determination of Metals in Children’s Plastic Toys using Inductively Coupled Plasma Optical Emission Spectrometry

Children's exposure to halogenated flame retardants and organophosphate esters through dermal absorption and hand-to-mouth ingestion in Swedish preschools

Children are exposed to endocrine disrupting chemicals (EDCs) through inhalation and ingestion, as well as through dermal contact in their everyday indoor environments. The dermal loadings of EDCs may contribute significantly to children's total EDC exposure due to dermal absorption as well as hand-to-mouth behaviors. The aim of this study was to measure potential EDCs, specifically halogenated flame retardants (HFRs) and organophosphate esters (OPEs), on children's hands during preschool attendance and to assess possible determinants of exposure in preschool indoor environments in Sweden. For this, 115 handwipe samples were collected in winter and spring from 60 participating children (arithmetic mean age 4.5 years, standard deviation 1.0) and analyzed for 50 compounds. Out of these, 31 compounds were identified in the majority of samples. Levels were generally several orders of magnitude higher for OPEs than HFRs, and 2-ethylhexyl diphenyl phosphate (EHDPP) and tris(2-butoxyethyl) phosphate (TBOEP) were detected in the highest median masses, 61 and 56 ng/wipe, respectively. Of the HFRs, bis(2-ethyl-1-hexyl)-2,3,4,5-tetrabromobenzoate (BEH-TEBP) and 2,2′,3,3′,4,4′,5,5′,6,6′-decabromodiphenyl ether (BDE-209) were detected in the highest median masses, 2.8 and 1.8 ng/wipe, respectively.HFR and/or OPE levels were found to be affected by the number of plastic toys, and electrical and electronic devices, season, municipality, as well as building and/or renovation before/after 2004. Yet, the calculated health risks for single compounds were below available reference dose values for exposure through dermal uptake as well as for ingestion using mean hand-to-mouth contact rate. However, assuming a high hand-to-mouth contact rate, at the 95th percentile, the calculated hazard quotient was above 1 for the maximum handwipe mass of TBOEP found in this study, suggesting a risk of negative health effects. Furthermore, considering additive effects from similar compounds, the results of this study indicate potential concern if additional exposure from other routes is as high.

#2550 Micro(nano)plastics in human urine: a surprising contrast between Chongqing's urban and rural regions

Abstract Background and Aims Microplastics (100 nm-5 mm) and nanoplastics (<100 nm) collectively referred to as micro(nano)plastics (MNPs), which are emerging pollutants all over the world. Environmental differences affect its distribution. The content of MNPs differs between urban and rural environments, according to previous studies. Method To understand the actual situation of human exposure to MNPs in various environments, this study collected 12 urine samples from volunteers in urban and rural regions of Chongqing and used pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and laser direct infrared spectroscopy (LDIR) to detect and analyze MNPs in urine. Results With an average abundance of 1.50 (2.31) mg/kg, MNPs were found in 9 samples by Py-GC/MS. Polyethylene (PE), polyvinyl chloride (PVC) and polyamide 66 (PA66), three different types of MNPs were found, with PE content being the highest among them. By using LDIR, MNPs were found in 7 samples, with an average abundance of 15.17 (23.13) particles/kg. Five different types of MNPs were found, with acrylates (ACR) being the main type, followed by polymethylmethacrylate (PMMA), polyurethane (PU), polypropylene (PP), polyethylene terephthalate (PET). Conclusion The findings demonstrated that urban region had much greater levels and more types of MNPs in human urine than rural. Additionally, regular contact with plastic toys and the use of personal care products are linked to the presence of MNPs. The influence of environmental factors on the actual exposure of the human body to MNPs was preliminary explored in this study, and two different methods were used for the first time to simultaneously detect and analyze MNPs in human urine. This allowed for the feasibility of comprehensively and effectively quantitatively analyzing the actual exposure of the human body to MNPs, and also provided the theoretical foundation for further research on the harm of MNPs to human health in different environments.

Development of cellulose/ZnO based bioplastics with enhanced gas barrier, UV-shielding effect and antibacterial activity

Development of renewable and biodegradable plastics with good properties, such as the gas barrier, UV-shielding, solvent resistance, and antibacterial activity, remains a challenge. Herein, cellulose/ZnO based bioplastics were fabricated by dissolving cellulose carbamate in an aqueous solution of NaOH/Zn(OH)42−, followed by coagulation in aqueous Na2SO4 solution, and subsequent hot-pressing. The carbamate groups detached from cellulose, and ZnO which transformed from cosolvent to nanofiller was uniformly immobilized in the cellulose matrix during the dissolution/regeneration process. The appropriate addition of ZnO (below 10.67 wt%) not only improved the mechanical properties but also enhanced the water and oxygen barrier properties of the material. Additionally, our cellulose/ZnO based bioplastic demonstrated excellent UV-blocking capabilities, increased water contact angle, and enhanced antibacterial activity against S. aureus and E. coli, deriving from the incorporation of ZnO nanoparticles. Furthermore, the material exhibited resistance to organic solvents such as acetone, THF, and toluene. Indeed, the herein developed cellulose/ZnO based bioplastic presents a promising candidate to replace petrochemical plastics in various applications, such as plastic toys, anti-UV guardrails, window shades, and oil storage containers, offering a combination of favorable mechanical, gas barrier, UV-blocking, antibacterial, and solvent-resistant properties.

Developing an evaluation system for green resin suppliers in the plastic toy industry based on collaboration willingness

Developing an evaluation system for green resin suppliers in the plastic toy industry based on collaboration willingness

Comprehensive survey on the use of plastic additives in toy products used in Japan.

Plastic additives have adverse effects on human health. Children frequently use toys that contain various substances found in paints, plasticizers, and other materials, which heighten the risk of specific chemical exposure. Infants are particularly prone to chemical exposure through the "mouthing" behavior because of the possibility of placing toys in their mouths. Thus, this vulnerability should be considered during risk assessments of chemical exposure. This study performed a comprehensive analysis of the chemical components in various 84 plastic toys including "designated toys" (toys that may be harmful to infant health if in contact with their mouths: Article 78 of the Enforcement Regulations of the Food Sanitation Law by the Minister of Health, Labor and Welfare) such as dolls, balls, blocks, bathing toys, toy vehicles, pacifiers, and household items, purchased in the Japanese market by nontargeted and targeted analysis. Plasticizers, flame retardants, and fragrances were the main compounds in almost all the toy products. The results showed that plastic products made in China tended to contain high levels of phthalate esters. In particular, hazardous plasticizers, such as diisodecyl, di-n-octyl, and diisononyl phthalates were detected above the regulatory limit (0.1%) in used products manufactured before regulations were passed in Japan. Furthermore, we detected alternative plasticizers, such as acetyl tributyl citrate (ATBC; 52%), diisononyl adipate (DINA; 50%), and di(2-ethylhexyl) terephthalate (DEHT; 40%). ATBC was detected at high concentrations in numerous toy products. Thus, infants with free access to indoor plastic toys might be exposed to these chemicals. This study observed that the chemical profiles of toy products were dependent on the year of manufacture. Furthermore, the detection of currently regulated plasticizers in secondhand products manufactured before regulations were enforced, along with the increasing trend of using alternative substances to regulated phthalate esters in products, suggests the potential exposure of infants to these plasticizers through the use of toys. Therefore, regular fact-finding surveys should continue to be conducted for the risk assessment and safety management of domestic toy products.

Petrokemijski bestijarij

Given the almost simultaneous beginning of fossil fuel extraction and the foundation of socialist Yugoslavia, it can be argued that Yugoslav socialist modernity was petromodernity. Self-governing socialism and its relationship to the environment and nonhuman animals were grounded in and enabled by fossil fuel extraction, the products derived from it, and the energy produced by its use. In this article, I explore the relationships between Yugoslav petromodernity, plastic production, and plastic animal toys. I analyze the ways in which petromodernity and its attendant practices of fossil fuel extraction and petrochemical product consumption were naturalized through the habituation of bodily senses to plastic through petromodern pedagogy, as exemplified by the design of plastic animal toys. I argue that plastic animal toys become vehicles for the introduction of the Plasticene and means for the production of relations of dominance over animals and nature. The aesthetics of cuteness, as enacted through the design of plastic animal toys, played a key role in these processes.

Chemometrics-based Discrimination of Virgin and Recycled Acrylonitrile-Butadiene-Styrene Plastics Toys via Non-targeted Screening of Volatile Substances

Owing to the growing emphasis on child safety, it is greatly urgent to identify and assess the unknown compounds and discriminate the recycled materials for plastic toys. In this study, gas chromatography mass spectrometry coupled with static headspace has been optimized by response surface methodology for non-targeted screening of unknown volatiles in acrylonitrile-butadiene-styrene (ABS) plastic toys. Optimum conditions for static headspace were 120 °C for extraction temperature and 48 min for extraction time. A total of 83 volatiles in 11 categories were qualitatively identified by matching the NIST database library, retention index and standard materials. Considering high positive rate and potential toxicity, high-risk volatiles in ABS plastic toys were listed and traced for safety pre-warning. Moreover, the differential volatiles between virgin and recycled ABS plastics were screened out by orthogonal partial least-squares discrimination analysis. Principal component analysis, hierarchical cluster analysis and linear discrimination analysis were employed to successfully discriminate recycled ABS plastic toys based on the differential volatiles. The proposed strategy represents an effective and promising analytical method for non-targeted screening and risk assessment of unknown volatiles and discrimination of recycled materials combining with various chemometric techniques for children's plastic products to safeguard children's health.

Microbiological analysis concerning the antibacterial effect of atomized Ionless® hypochlorous acid water in a nursery school environment

IntroductionIn daycare centers, infants come in close contact with each other, and contact, droplet, and mouth-to-mouth infections may occur owing to sharing of toys. Additional effective disinfection methods should be considered aside from wiping with disinfectants—including alcohol or sodium hypochlorite solution—for environmental disinfection of daycare centers. We aimed to examine the usefulness of hypochlorous acid water atomization in the effective disinfection of the classroom environment and toys at a nursery school. MethodsEnvironmental cultures of the nursery and toys were prepared to evaluate the species and bacterial load and to assess the contaminated areas. Staphylococcus aureus petri dishes were placed at high-frequency contact sites, and hypochlorous acid water was atomized to achieve a 0.03-ppm atmospheric chlorine concentration. After the atomization, the amount of S. aureus bacteria on the Petri dish and the changes in bacterial count isolated from the environment and toys were evaluated. ResultsHypochlorous acid water atomization was performed for 5 h to avoid condensation. After a 3-h atomization, ≥99.99% of S. aureus was eliminated on petri dishes; furthermore, a significant disinfection effect was observed on environmental bacteria at least 1 h after atomization. For rubber and textile toys, the significant disinfection effect was observed 1 h after atomization, and for plastic toys, the effect was observed 3 h after atomization. ConclusionsHypochlorous acid water atomization is a useful strategy to disinfect nursery school classrooms.

Novel molecularly imprinted nanogel modified microfluidic paper-based SERS substrate for simultaneous detection of bisphenol A and bisphenol S traces in plastics

Paper-based surface-enhanced Raman scattering (SERS) optical nanoprobes provide ultrasensitive analyte detection; however, they lack selectivity, making them difficult to use in real-world sample analysis without a pretreatment process. This work describes the design of a microfluidic paper-based SERS substrate based on molecularly imprinted nanogels decorated with silver nanoparticles to simultaneously detect bisphenol A (BPA) and bisphenol S (BPS) traces in plastic toys and receipts. The synthesized nanogels have two characteristics that boost SERS performance: molecularly imprinted cavities that allow for selective adsorption and a wrinkled surface that creates uniformly distributed hot spots. Simple paper-based sensor devices were built as ‘drop and read’ SERS substrates with a separate reservoir to detect a single target, while advanced SERS platforms were designed as a microfluidic chip with two reservoirs connected by a channel for simultaneous detection of BPA and BPS. The SERS platform with a single reservoir showed outstanding analytical performance for the detection of BPA and BPS, with low detection limits of 0.38 pM and 0.37 pM, respectively. The microfluidic paper-based sensor allowed simultaneous and selective detection of BPA and BPS with detection limits estimated at 0.68 nM and 0.47 nM, respectively. The developed sensors are successfully applied to detect BPA and BPS in plastic products and receipts. Finally, the results obtained with our method showed greater sensitivity than those of commercially available ELISA kits, and the acquired values within the ELISA detection range were in excellent agreement.

Global survey of dioxin- and thyroid hormone-like activities in consumer products and toys

BackgroundChildren and consumers are exposed to increasingly complex mixtures of known and as-yet-unknown toxic chemicals from toys and products. However traditional chemical analysis methods only evaluate a small number of chemicals at a time thereby restricting consumer awareness of the full range of potentially harmful chemicals in products. MethodsWe used high-throughput effect-based non-animal methods to investigate exposures to complex chemical mixtures of several kinds of brominated flame retardants (BFRs) for their dioxin- and thyroid hormone-like activities in various kinds of consumer products and toys from 26 different countries, on four continents (Africa, America, Asia and Europe) in combination with chemical analysis of various polybrominated flame retardants (BFRs) and their impurities (such as polyhalogenated PCDD/Fs and PBDD/Fs). ResultsWe found high levels of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in toys and now, for the first time, also in consumer products that are manufactured from black plastics containing certain brominated flame retardants (BFRs). The presence of PBDD/PBDFs as well as other BFRs in various black plastic materials from additional countries as well as additional kinds of consumer products as confirmed by effect-based in vitro reporter gene DR CALUX and TTR-TRβ CALUX assays as well as congener-specific chemical analysis. We compared total Toxicity Equivalent (TEQ) levels of PBDD/F-TEQs analysed by chemical analysis to by CALUX bioassay measured Biological equivalence (BEQ) concentrations (for further info see at ISO 23196, ISO, 2022). In the case of TBBPA, both chemical and TTR-TRβ CALUX analysis measure direct the amount of TBBPA. Finally, the daily ingestion of 2,3,7,8-TCDD equivalents from PBDD/Fs-contaminated plastic toys by child mouthing habits have been related to our earlier study (Budin et al., 2020). ConclusionsInteraction of children with such contaminated plastics may significantly contribute to the daily uptake of dioxin- and thyroid hormone transport disrupting-like compounds. Effect-based bioassays for dioxin- and thyroid hormone-like activities are relevant to pick-out such complex mixtures of known and yet unknown (and therefore not regulated) substances for safer and more sustainable plastics. Low POPs Content Levels and other mechanisms set under the Basel and Stockholm Conventions are set far too high to prevent a significant flow of BFRs and PBDD/Fs into consumer products.

Toxicity assessment of microplastic (MPs); a threat to the ecosystem

Plastic is now considered part and parcel of daily life due to its extensive usage. Microplastic (MP) pollution is becoming a growing worry and has been ranked as the second most critical scientific problem in the realm of ecology and the environment. Microplastics are smaller in size than the plastic and are more harmful to biotic and as well as abiotic environments. The toxicity of microplastic depends upon its shape and size and increases with an increase in its adsorption capacity and their toxicity. The reason behind their harmful nature is their small size and their large surface area-to-volume ratio. Microplastic can get inside fruits, vegetables, seeds, roots, culms, and leaves. Hence microplastic enters into the food chain. There are different entry points for microplastic to enter into the food chain. Such sources can include polluted food, beverages, spices, plastic toys, and household (packing, cooking, etc.). The concentration of microplastic in terrestrial environments is increasing day by day. Microplastic causes the destruction of soil structure; destroys soil microbiota, cause depletion of nutrients in the soil, and their absorption by plants decreases plant growth. Apart from other environmental problems caused by microplastic, human health is also badly affected by microplastic pollution present in the terrestrial environment. The presence of microplastics in the human body has been confirmed. Microplastic enters into the body of humans in different possible ways. According to their way of entering the body, microplastics cause different diseases in humans. MPs also cause negative effects on the human endocrine system. At the ecosystem level, the impacts of microplastic are interconnected and can disrupt ecological processes. Although recently different papers have been published on several aspects of the microplastic present in the terrestrial environment but there is no complete overview that focus on the interrelationship of MPs in plants, and soil and their effect on higher animals like a human. This review provides a completely detailed overview of existing knowledge about sources, occurrences, transport, and effects of microplastic on the food chain and soil quality and their ecotoxicological effects on plants and humans.

The current state of diagnostics and management of foreign bodies in the respiratory tract in children

Introduction. Foreign body aspiration (FBA) into the respiratory tract is a severe, life-threatening condition in children which requires urgent medical and diagnostic measures. Purpose. To study outcomes after FBA diagnostics and treatment in children and to develop an algorithm for diagnosing foreign bodies in the respiratory tract in this group of patients. Material and methods. Outcomes in 86 children who were hospitalized with suspected foreign bodies in their respiratory tract to the Clinic of Pediatric Surgery in Marat Ospanov West Kazakhstan Medical University, Aktobe, Republic of Kazakhstan in 2018–2022. Results. In 73 children, out of 86, FBA was confirmed. Distribution of children with FBA by age was as follows: less than one year – 5 (6.8 %) children; 1–3 years – 46 (63.1 %); 3–5 years – 7 (9.6 %), over 5 years – 15 (20.5 %). Localization of foreign bodies in the respiratory tract was as follows: larynx –6; trachea – 10, right main bronchus –26, left main bronchus – 30, both lower lobe bronchi – 1. The revealed foreign bodied were : peanuts – 24 (32.8 %) cases, sunflower seed – 13 (17.8 %), fountain pen cap – 7 (9.6 %), plastic toy part – 5 (6.8 %), fish bone – 5 (6.8 %), stationery carnation – 4 (5.5 %), bone – 4 (5.5 %), small rock – 4 (5.5 %), carrot – 3 (4.2 %), tooth – 2 (2.7 %), bead – 1 (1.4 %), food masses –1 (1.4 %). In the diagnostics of foreign bodies, anamnesis, clinical examination, radiation and endoscopic diagnostic techniques were of great importance. On analyzing the obtained clinical material, the researchers developed their own algorithm for FBA diagnosis. Foreign bodies were removed with rigid bronchoscopy in 55 children, with fibrobronchoscopy in 9 children, direct laryngoscopy – in 6 cases, at thoracotomy and bronchotomy – in 3 children. There were no complications associated with the removal of foreign bodies. Conclusions. Foreign bodies in the respiratory tract are met most often in children , aged 1–3. In doubtful cases, MSCT was used in addition to traditional diagnostic methods. It allows to exclude or identify foreign bodies invisible at X-ray images. FBA removal should be performed at the third level medical institutions.

Correlative Factors for Types of Tracheobronchial Foreign Bodies Encountered in Children.

To characterize the correlative factors for types of tracheobronchial foreign bodies (TFBs) encountered in children. All included patients diagnosed with TFB underwent rigid bronchoscopy as the first surgery in the Children's Hospital of Chongqing Medical University. The data of 1026 patients aged 0-18years were retrospectively collected between February 2019 and January 2022. About 94.44% of the children with TFB had organic FBs, among which, peanuts were the most common FBs, followed by melon seeds and walnuts. The most common inorganic FBs included pen points or caps, plastic toys, and plastic papers. As compared to the children with organic FBs, those with inorganic FBs consisted of a higher proportion of children aged ≥3years old, a time before surgery of >7days, dyspnea, FBs size of >10mm, longer operation time, more than two operation procedures, and atelectasis. On the other hand, the proportion of children with aspiration history, cough, and obstructive emphysema in the inorganic FB group was lower as compared to the organic FBs (P< .05). The related factors related to the patient's characteristics, symptoms, operation situations, and preoperative complications can be predicted based on the identification of FB type.

Total and bio-accessible toxic metals in low-cost children toys sold in major markets in Ibadan, South West Nigeria

Toxic metals are usually added to children's toys to improve/impact some intrinsic properties such as colour which attracts children. Some of the toxic metals have life-threatening potentials on children when ingested. There is no specific legislation in Nigeria that monitors and regulates limits of such metals in toys. This study assessed total and bio-accessible concentrations of Pb, Cd, Cr, Ni, and Mn in imported low-cost children's plastic toys sold in popular markets in Ibadan, Nigeria. A total of 22 different toys were purchased and subjected to an indicative test for the presence of polyvinyl chloride (PVC) following the Beilstein method as well as analysing for total recoverable metals and migrated fractions into simulated saliva and gastric environments. Toy samples were crushed, ashed, and dissolved with dilute nitric acid for total recoverable metals while migration studies were carried out using simulated saliva and gastric environments to check bio-accessible fractions that could leach into the human system. Metals in all extracts were determined using flame atomic absorption spectrophotometric technique. The indicative PVC test showed 12 samples positive to PVC and 10 tested negative. Total recoverable metal concentrations (mg/kg) ranged as follows: Pb: Below Detection Limit (BDL) - 4838, Cd: BDL - 44.9, Cr: 0.331–79.8, Ni: 0.273–59.1 and Mn: 0.205–31.0 with Pb and Cr having 18 and 14% of samples higher than EU limits of 90 and 60 mg/kg. Bio-accessible concentrations in artificial saliva were: Pb: BDL - 42.4, Cd: BDL-0.450, Ni: BDL-1.40 and Mn: BDL-0.058 with Pb higher in 70% of samples compared to 2.0 mg/kg migrated EU limit while other metals were within the limits. Furthermore, metal concentrations that migrated to gastric environment were: Pb: 8.24–50.3, Cd: BDL-0.057, Ni: 0.103–1.96 and Mn: BDL-1.37 with Pb in 100% of samples higher than 2.0 mg/kg EU migrated limit. Chromium migration in both environments was BDL. The results of this study suggest that toxic metal contents are present in both PVC and non-PVC made toys, but higher in PVC containing toys. Though the calculated hazard index for health risk assessment of heavy metals was < 1 for all metals, Pb concentration in both total recoverable extract and saliva and gastric environments seem to be problematic and constant monitoring and regulation are required.

Application of validated migration models for the risk assessment of styrene and acrylonitrile in ABS plastic toys

With styrene and acrylonitrile in ABS plastic toys as examples, this paper introduces to the development of a systematic strategy for studying the chemical migration risk in toys. The approach, included the detection method, establishment of migration model, model verification, and the practical application of the model in risk assessment. First, simple and sensitive methods for detecting analyte residues and migration were developed by headspace GC-MS. Then, the migration models were established based on the migration data from 5 min to 168 h and verified using 11 ABS samples. The results showed that the predicted values of the models and the experimental values had a good fit (RMSE=0.10–8.72 %). Subsequently, the migration of analytes in 94 ABS toys was predicted with these models at specific migration times. The daily average exposure level to styrene and acrylonitrile were estimated for children (3 months to 3 years). At last, the migration models reasonably predicted that the cancer risk of styrene and acrylonitrile in ABS toys were 1.6 × 10−8–1.4 × 10−6 and 3.1 × 10−8–1.6 × 10−6, respectively. This research contributes to promote toy safety and child health by enriching migration models and risk assessments.