Plastic Film Mulching Research Articles

Alfalfa Cultivation Patterns in the Yellow River Irrigation Area on Soil Water and Nitrogen Use Efficiency

Establishing lucerne field is an efficient way to protect natural steppes, alleviate conflicts between meadows and livestock, and promote the development of animal husbandry. However, problems such as extensive field management, valuing yield over quality, and low resource utilization are endemic in production. Exploring reasonable cultivation patterns can contribute to improving the current situation of artificial grassland production and promoting the high-quality development of husbandry and prataculture. Lucerne the field experiment was carried out in Jingtai, Gansu Province, China in 2021–2022; this study compared and analyzed the effects of three cultivation patterns—ridge tillage with plastic film mulching (PM), ridge tillage with biodegradable film mulching (BM), and traditional flat planting (FP)—on soil water, heat, and fertilizer, as well as lucerne growth, yield, quality, and water and nitrogen use efficiency. The results show that: (1) during the growth period of lucerne, PM and BM treatments augment the average moisture content of the soil layer of 0–120 cm by 31.19% and 24.03% compared to the FP treatment, respectively. In the soil layer of 0–40 cm, PM and BM treatments abate the soil moisture content of the ridges by an average of 19.29% and 7.89% compared to that in the ditches, respectively. In the soil layer of 40–120 cm, PM and BM treatments elevate the soil moisture content of the ridges by 4.40% and 4.65% on average compared to that in the ditches, respectively. The average soil temperature in a soil layer of 5–25 cm shows PM > BM > FP. In contrast with the FP treatment, PM and BM treatments increase the soil temperature of the ridges by an average of 1.87 °C and 0.96 °C and decrease that of the ditches by an average of 0.47 °C and 0.46 °C, respectively. After two years of planting, the three cultivation patterns all promote the soil nutrient content. Compared to the FP treatment, PM and BM treatments increase the organic matter content by 9.94% and 19.94%, respectively. (2) Ridge tillage with film mulching can evidently stimulate the growth of lucerne and enhance yield and quality. Compared to the FP treatment, PM and BM treatments enhance plant height by an average of 15.37% and 4.04%, stem diameter by an average of 34.14% and 14.58%, yield by an average of 21.20% and 14.77%, crude protein content by an average of 13.47% and 7.68%, and relative feed value by an average of 8.71% and 4.41%, respectively. (3) During the two-year growing period, the irrigation amount of lucerne was 508.60–615.30 mm, and the evapotranspiration was 563.70–761.80 mm. Compared to the FP treatment, PM and BM treatments hoist water use efficiency by an average of 43.50% and 17.56%, nitrogen partial factor productivity by an average of 21.20% and 15.22%, and net income by an average of 14.78% and 11.05%, respectively. In summary, in ridge tillage, both ordinary film mulching and biodegradable film mulching can create a favorable soil environment for lucerne growth and heighten production effect. The former has a better effect on advancing the lucerne production effect, and the latter exhibits superior performance in improving soil fertility.

Film mulching counteracts the adverse effects of mild moisture deficiency, and improves the quality and yield of Cyperus esculentus. L grass and tuber in the oasis area of Tarim Basin.

Plastic film mulching (PFM) and deficit irrigation (DI) are vital water-saving approaches in arid agriculture. Cyperus esculentus is a significant crop in dry zones. However, scant data exists on the impacts of these water-saving methods on C. esculentus yield and quality. Using randomized block experiment design. Three irrigation strategies were tested: CK (standard irrigation), RW20 (20% water reduction), and RW40 (40% water reduction). Mulchin treatments included film mulching (FM) and no film mulching (NFM). Results revealed substantial effects of film mulching and drip irrigation on soil nutrients and physical properties, with minor influence on grass, root, and tuber stoichiometry. PF treatment, DI treatments, and their interaction significantly affected C. esculentus forage and tuber yields. Initially, grass and tuber yields increased and then decreased with reduced irrigation. The highest yields were under RW20 (3716.31 and 4758.19 kg/ha). FM increased grass and tuber yield by 17.99% and 8.46%, respectively, over NFM. The water reduction augmented the biomass distribuiton of the leaf and root, while reducing the tuber biomass in NFM. FM significantely impacted grass ether extract content, while reduced water influenced grass and tuber crude protein and tuber ether extract content. Mild water stress increased ether extract, crude protein, and soluble matter in grass and tubers, while excessive RW decreased them. Integrating soil traits, nutrients, yield, and quality, findings indicate C.esculentus yield and quality primarily hinge on soil water content, pond hydrogenase, and electrical conductivity. Based on this results, the recommended strategy is to reduce irrigation by 20% for cultivating C. esculentus in this area.

Study of Humic Acid Organic Liquid Mulching Film on Promoting Green Agriculture Development

Mulching film is an important measure to promote agricultural production income and increase, the current widely used plastic mulching film has high stability, difficult to decompose, resulting in "agricultural white pollution", the development and application of degradable mulching film has become a solution. This case focuses on the study of organic multifunctional liquid mulching film with humic acid as the main raw material, which plays a unique role in promoting biological activity and soil improvement, the application of "liquid" spray film, the integration of fertilizer, pesticides, mulching film in one multi-functional comprehensive effect, to clarify its functional characteristics, alternative feasibility and the promotion of green agricultural development, and put forward the existing problems and countermeasures. This paper provides technical support and practical demonstration for the elimination of exogenous pollutants in farmland, and looks forward to the broad application prospects of this liquid mulch film in environmental protection and other aspects.

Effects of Conventional Non-Biodegradable Film-Derived Microplastics and New Biodegradable Film-Derived Microplastics on Soil Properties and Microorganisms after Entering Sub-Surface Soil

Plastic film mulching, widely used in agriculture, leads to microplastic (MP) pollution in soils. While biodegradable polybutylene adipate terephthalate (PBAT) films may offer a solution, their impacts on subsurface soils and microorganisms remain unclear. To investigate the effects of conventional non-biodegradable polyethylene (PE) and biodegradable PBAT MPs on the properties of sub-surface soils and microbial communities, MPs were added at varying doses in a field experiment and incubated for 160 days. Physicochemical characteristics, nutrient dynamics, and microbial composition, diversity, and networks of soils were analyzed using standard techniques and 16S rRNA/ITS gene sequencing. Correlations between soil properties and microbes were assessed. Both MP types significantly altered soil characteristics, with PBAT-MP elevating pH and the levels of available phosphorus and potassium more than PE-MP. Microbial composition shifts occurred, with low-addition PBAT-MP promoting plastic-degrading genera. The assessment of α/β-diversity indicated that PBAT-MP predominantly influenced fungi while PE-MP impacted bacteria. An examination of microbial co-occurrence networks highlighted that PE-MP primarily disrupted fungal interactions, whereas PBAT-MP streamlined network complexity. Correlation analyses revealed that PBAT-MP promoted fungal diversity/network resilience correlating to nutrients. PE-MP and PBAT-MP significantly altered native soil/microbe relationships. PBAT-MP may exert greater, yet unknown, impacts over time through its biodegradation into newer and smaller fragments. Future research needs to integrate multi-omics and stable isotope science to elucidate the deep mechanistic impacts of degraded film-derived MPs on microbial ecological functions and biogeochemical cycles. Attention should also be paid to the long-term accumulation/transport of MPs in agricultural soils. Overall, this work deepens the impact and understanding of MPs from plastic film on sub-surface soil ecology. Furthermore, it provides a theoretical foundation for managing ‘white pollution’ in the film-covered farmlands of arid and semi-arid regions in China.

Modification of polyvinyl alcohol with 2-hydroxypropionic acid and cross-linking with glutaraldehyde for the preparation of biodegradable mulch paper and its properties

Abstract The preparation of biodegradable mulch film with paper-based materials has become a significant focus in mulch film development due to the serious pollution caused by plastic mulch film. This study utilized the esterification cross-linking reaction of LA, PVA, and GA to coat the surface of paper as the substrate. FTIR, TGA, XRD, SEM, tensile testing, and oxygen, water vapor barrier performance tests were performed. The optimal conditions for film preparation were determined to be a 10 % PVA aqueous solution, 5 % GA content, and a PVA/LA/GA ratio of 1:2:1. The resulting film paper exhibited a dry strength of 6.52 kN/m, a wet strength of 0.23 kN/m, a tearing degree of 969.35 mN, a Cobb value of 12.04 g/m2, a water vapor transmission rate of 573.27 g m−2 24 h−1, and an oxygen transmission rate of 7.373 cm3 m−2 24 h−1. After a 6-week landfill degradation test, the film showed a degradation rate of 25.3 %, while still maintaining a tensile strength of 1.89 kN/m. Field application tests in greenhouses confirmed that the film paper facilitated the growth of strawberry, its mechanical and barrier properties suitable for a biodegradable paper mulch.

Effects of the Plastic Mulching System and Fertilizer Application on the Yield of Tartary Buckwheat (Fagopyrum tataricum) and Water Consumption Characteristics in a Semi-arid Area

Although plastic film mulching is commonly utilized to enhance crop water use efficiency (WUE) in semi-arid areas, the combined effect of plastic film mulching and fertilizer application on Tartary buckwheat yield is still unknown. To address this gap, a four-year field experiment was conducted from 2018 to 2021 to investigate the effect of plastic film mulching and fertilizers on the soil water storage, plant growth, yield, and WUE of Tartary buckwheat in semi-arid environments. The treatments comprised traditional planting without fertilizer (TNF), traditional planting with fertilizer application (N–P2O5–K2O: 40–30–20 kg ha−1) (TF), plastic film mulching with fertilizer application (N–P2O5–K2O: 40–30–20 kg ha−1) (MF), and plastic film mulching without fertilizer (MNF). The results indicated that MF treatment significantly increased leaf area index and SPAD values compared to the other treatments. The yield of Tartary buckwheat under the film mulching increased by 23.3% in comparison to no-mulching treatments, and under fertilizer application it increased by 18.2% compared to no fertilizer. WUE under film mulching exhibited an increase of 3.1% in 2018, 34.9% in 2019, 45.5% in 2020, and 34.6% in 2021, respectively, compared to no mulching. The impact of film mulching on WUE was more significant in years with lower precipitation compared to those with normal or higher precipitation levels. Overall, MF significantly enhanced both the yield and WUE of Tartary buckwheat. This approach proved to be an effective strategy for bolstering drought-resistant yield and optimizing resource efficiency in Tartary buckwheat cultivation in semi-arid regions. Moreover, the positive effects of plastic mulching and fertilizer application on grain yield and water use efficiency were more pronounced in drier years.

Exploring the potential of earthworm gut bacteria for plastic degradation

The use of plastic mulch films in agriculture leads to the inevitable accumulation of plastic debris in soils. Here, we explored the potential of earthworm gut-inhabiting bacterial strains (Mycobacterium vanbaalenii (MV), Rhodococcus jostii (RJ), Streptomyces fulvissimus (SF), Bacillus simplex (BS), and Sporosarcina globispora (SG) to degrade plastic films (⌀ = 15 mm) made from commonly used polymers: low-density polyethylene film (LDPE-f), polylactic acid (PLA-f), polybutylene adipate terephthalate film (PBAT-f), and a commercial biodegradable mulch film, Bionov-B® (composed of Mater-Bi, a feedstock with PBAT, PLA and other chemical compounds). A 180-day experiment was conducted at room temperature (x̄ =19.4 °C) for different strain–plastic combinations under a low carbon media (0.1× tryptic soy broth). Results showed that the tested strain–plastic combinations did not facilitate the degradation of LDPE-f (treated with RJ and SF), PBAT-f (treated with BS and SG), and Bionov-B (treated with BS, MV, and SG). However, incubating PLA-f with SF triggered a reduction in the molecular weights and an increase in crystallinity. Therefore, we used PLA-f as model plastic to study the influence of temperature (“room temperature” & “30 °C”), carbon source (“carbon-free” & “low carbon supply”), and strain interactions (“single strains” & “strain mixtures”) on PLA degradation. SF and SF + RJ treatments significantly fostered PLA degradation under 30 °C in a low-carbon media. PLA-f did not show any degradation in carbon-free media treatments. The competition between different strains in the same system likely hindered the performance of PLA-degrading strains. A positive correlation between the final pH of culture media and PLA-f weight loss was observed, which might reflect the pH-dependent hydrolysis mechanism of PLA. Our results situate SF and its co-culture with RJ strains as possible accelerators of PLA degradation in temperatures below PLA glass transition temperature (Tg). Further studies are needed to test the bioremediation feasibility in soils.

Unperforated film-covered planting contributes to improved film recovery rates and foxtail millet grain yields in sandy soils

Plastic film mulching improves the soil water content and temperature and, thus, contributes to enhanced grain yield in arid and semi-arid areas, such as Northwest China. However, in traditional film-covering methods, plastic films are difficult to recycle, causing environmental issues. Therefore, developing cultivation methods with enhanced film recovery rates is important for sustainable agricultural development. Here, we evaluated how the planting method affected the soil temperature, water content, film recovery rate, and grain yield by applying the following three planting patterns to the traditional crop, foxtail millet, in 2021–2022: no plastic film mulching (NP), plastic film mulching (MP), and planting on the film edge (PFE); in the latter, holes were not punched in the film and crops were planted approximately 5 cm from the film edge. The results for 2021 showed that the biomass ranged from 27.69 g to 33.76 g per plant, and the biomass was increased by 21.9% and 3.2% in PFE compared with NP and MP, respectively. However, in 2022, the biomass increased in PFE by 52.5% and 17.7% compared with NP and MP, respectively. In 2021, the highest grain yield was observed in PFE (2480 kg/hm2), followed by MP (2470 kg/hm2) and NP (2343 kg/hm2); in 2022, a significantly higher grain yield was observed in PFE than that in MP and NP. Although the soil temperature increased in PFE, it was not as high as in MP. The relatively higher soil temperature increased the root growth process, stimulated the production of root exudates (acetic acid and citric acid), and increased the soil enzyme (sucrase and urease) activity. Increases in organic acids and soil enzymes assisted in the decomposition of soil organic matter and induced relatively higher levels of available nutrients, such as nitrogen and phosphorus, and the higher root reuse rates contributed to higher grain yields. In addition, fewer holes were punched in the film of the PFE model, which improved film recovery, and the recovery rate of PFE was higher than that of MP. These results indicate that the proposed unperforated film-covered planting pattern is suitable for millet production in sandy soil.

Long‐term straw mulching alleviates microbial nutrient limitations and increases carbon‐use efficiency within aggregates

AbstractLong‐term straw mulching was known to change soil nutrient content, aggregate distribution and extracellular enzyme activities. However, the impact of long‐term straw mulching on microbial nutrient limitations and carbon‐use efficiency (CUEst) within aggregates remains unclear. To fill the gap, we conducted a 10‐year field experiment in a semi‐arid region and used an ecoenzymatic stoichiometry model to quantify microbial resource limitations in soil aggregates under long‐term mulching. We studied the effects of two mulching measures (plastic film mulching [FM] and straw mulching [SM], with no mulching as the control [CK]) on the nutrient content and limitations within aggregates. The results show that compared with FM, SM increased the proportion of aggregates to larger >2 mm and decreased the proportion of aggregates in the 2–0.25 mm classes. Additionally, FM resulted in carbon (C) and phosphorus (P) limitations in the soil, particularly in the >2 mm class, while SM alleviated these constraints. This effect was primarily attributed to the increase in soil organic carbon (SOC) and microbial biomass carbon content (Cm), especially the enhanced carbon content associated with larger aggregates (>2 mm) and the increased activities of carbon–nitrogen (C–N)‐acquiring enzymes. SM also resulted in high CUEst by influencing microbial P limitation. Random forest analysis indicates that soil abiotic factors, particularly SOC and total nitrogen (TN), were the main drivers of microbial resource limitations within the aggregates. These findings suggest that the mulching material determines the development of soil aggregates and resource allocation within these aggregates. Thus, the study provides valuable insights for formulating effective carbon management strategies in semi‐arid regions.

Optimized Design for Vibration Reduction in a Residual Film Recovery Machine Frame Based on Modal Analysis

The technology of plastic film mulching is widely applied in Xinjiang, but it also brings about serious issues of residual film pollution. Currently, the 1MSF-2.0 residual film recovery machine can effectively address the problem. However, it faces challenges such as high overall machine weight and noticeable frame vibrations, which affect the stability of the entire machine operation. The frame, as the installation foundation, needs to bear loads and impact. Therefore, the reliability of the frame is crucial for the stability of the entire machine. Improving the frame’s vibration is of great importance. In response to the significant vibration issues during the operation of the 1MSF-2.0 residual film recovery machine, this paper utilized Workbench 2020 R2 to establish a finite element model of the machine frame and conducted static analysis to obtain strength information, thereby initially understanding the optimization space of the frame. Building upon this, Mechanical was employed to solve the first 14 natural frequencies and mode shapes of the frame, and the accuracy of the theoretical analysis was verified through modal testing. After analyzing the frequency characteristics of external excitation forces, it was found that the fourth-order natural frequency of the frame fell within the frequency range of the excitation force of the shaft of the straw grinder, causing resonance in the frame and necessitating structural optimization. The optimal results indicated that the optimized frame increased in mass by 4.41%, reduced the maximum stress value by 2.56 MPa, and increased the fourth-order natural frequency to 22.7 Hz, avoiding the frequency range of the excitation force of the shaft of the straw grinder, thus improving the resonance issue. This paper provides a reference for optimizing the design of the frame of the residual film recovery machine.

Effect of plastic film mulch and irrigation water regimes on soil temperature pattern, plant growth and water productivity of maize

In arid and semi-arid climate, combining different plastic film mulches and irrigation water regimes may be lead to enhance of grain yield and water use efficiency (WUE) with water saving. For the optimum grain yield of maize crop, soil water content and temperature, and irrigation water use efficiency are still not well understood in the climate of Sindh, Pakistan. Therefore, the aim of this study was to examine the soil moisture pattern, soil temperature, yield and WUE under interaction of mulching and soil water status. This field experiment was conducted at the station of department of Irrigation and Drainage during cropping seasons 2021–22. In field trial involved three mulching modes (black and white film, without film) and two irrigation water regimes (sufficiently and severely water stress). The results showed that across the irrigation water regimes treatments, without mulched treatment plants depressed both moisture status and temperature of the soil, nonetheless, the decrease soil water status was more pronounced compared with the reduction in soil temperature. Plant dry biomass was improved when mulching with black plastic film as exemplified by the increased plant height, indicating the increased plant biomass. However, across the mulching treatments, by improving the plant micro-climate condition by black colored plastic film mulching increased significantly grain yield by 17–47% and WUE by 16–46% because less soil water depletion as compared with white plastic mulch and without mulch treatments, respectively, causing the serious waste of water resources. Across the water regimes, sufficiently water stressed condition (80% of soil water holding capacity, SWHC) could significantly enhance grain yield by 17.4% and WUE by 8% as compared to moderately water stressed condition (50% of SWHC). Mulching with black colored plastic film is suggested for maize in terms of high grain yield and water use efficiency with a minor dry biomass reduction.

Water productivity in pineapple (Ananas comosus) cultivation using plastic film to reduce evaporation and percolation

Irrigated agriculture needs significant amounts of water for increasing irrigated areas to meet the increase food demand. New alternatives with high water use efficiency are needed to increase crop productivity. This work evaluates the use of plastic film mulch either as groundcover or as a percolation barrier to increase yields and water use efficiency of pineapple (Ananas comosus L.). An experiment was carried out with pineapple on a loamy sand-soil. The treatments were: (i) soil tillage with plastic film as groundcover combined with plastic film as a percolation barrier installed at 0.40 m below the soil surface; (ii) soil tillage with no groundcover combined with a percolation barrier; (iii) soil tillage with plastic film as groundcover only; (iv) soil tillage without groundcover and percolation barrier. The use of plastic mulch maintained the levels of soil water availability at least 80% during the crop cycle, while without it soil water values ranged from 15% to 70%. Groundcover with plastic mulch contributed significantly to decrease evapotranspiration and the medium crop coefficient. The plastic groundcover combined with or without the plastic percolation barrier yielded the better results of productivity, irrigation water productivity, and water footprint. The mean irrigation water productivity and water footprint were 667.12 kg mm−1 ha−1 and 109.0 L kg−1, respectively, for the use of a plastic groundcover combined with a plastic percolation barrier. The percolation barrier was more effective for saving water than for increasing yield. The use of percolation barrier with plastic contributed for saving 92–103 L kg−1 ha−1 when combined with or without ground cover.

Mass spectral characterisation of cyclic oligoesters in a biodegradable mulch film.

Plastic mulch film manages weed growth and moisture loss on the surface of cropping beds. The chemical components of such plastics include polymer(s), additives and non-intentionally added substances (NIASs). The unknown chemical nature and behaviours of these constituents require investigation due to their potential to add to the anthropogenic chemical burden in the agrifood system. Solvent extracts of a commercial 15% polylactic acid (PLA)/85% poly(butylene adipate-co-terephthalate) mulch film were investigated using gas chromatography-mass spectrometry (GC-MS) with electron ionisation to characterise the additive and NIAS components. The obscurity of some of the NIASs meant their identification was not readily achieved through routine MS library comparisons. As such, the identification of several polymer-derived compounds required interpretation of the MS data and re-application of the derived fragmentation patterns with reference to the wider literature. Unknowns were confirmed using commercially available compounds. Unknown NIASs were identified as cyclic oligoesters comprised of the monomeric building blocks of the polymer system. Cyclic structures derived from the monomers of polybutylene adipate (PBA) and polybutylene terephthalate (PBT) fragmented through a primary pathway involving 1,5- and 1,3-H transfers at ester linkages. Characteristic ions at m/z 111, 129, 183 and 201 for PBA-derived cyclic oligoesters and m/z 104, 132, 149 and 221 for PBT-derived cyclic oligoesters were assigned in the mass spectra of unknowns. Cyclic oligoesters containing sebacate moieties were also identified, indicating the presence of polybutylene sebacate as an unexpected component of the mulch. Systematic analyses of the sort reported here are valuable for providing alternative approaches for the identification of plastic-related chemicals. Open publication of MS spectral data is required to build a greater understanding of the mulch film chemical components contributing to the environmental chemical load introduced to agroecosystems.

Modeling the effects of the plastic-mulched cropland over the arid and semi-arid areas of China on the East Asian regional climate

Arid and semi-arid areas of Northwest China are extremely sensitive to climate change. Plastic mulch is a technology used worldwide to inhibit soil evaporation and increase crop yield. The properties of plastic film are significantly different from the soil. Plastic mulch not only alters the physical attributes of the underlying surface, but also blocks the energy and mass exchanges between the land surface and the atmosphere. This latter situation has not been depicted in current regional climate models. This study couples a detailed plastic mulch layer submodel considering the effects of the plastic mulch on the radiation and heat transfer into the regional climate model RegCM4.5 to explore the effects of plastic mulch on East Asian regional climate over Northwest China. Results suggest that the plastic film covering cropland can enhance the near surface sensible heat transfer, accelerate the rise of near surface air temperature, and reduce the water vapor supply of convective process. Meanwhile, the rainfall is reduced in Northwest China and most areas south of the Yangtze River, while the precipitation is improved from Sichuan and Chongqing to North and Northeast China when the cropland underlying surface is covered by the plastic film. Moreover, the cyclone of the lower troposphere in Northwest China is strengthened and the air pressure is weakened, which promotes the subtropical high to the northwest, thus East Asian summer monsoon is influenced because of the plastic film mulching.

How do novel plant growth regulators and cultivation models strategies affect mechanical strength, lodging resistance and maize productivity in semi-arid regions?

Plant growth regulators are synthetic compounds that have become a significant and technical guarantee for agricultural productivity. In China, "Jindeli", which contains active elements of ethephon and cycocel (EC), has been proven to prevent maize stem elongation, improve maize stem thickness, stem morphology and mechanical strength, root growth, lodging resistance, and yield under various cultivation models. Diethyl aminoethyl hexanoate (DA-6) can promote cell division and growth. From 2020–2021, four growth regulators sprays were used to conduct a field experiment; G1: water spraying; G2: EC spraying; G3: DA-6 spraying; G4: EC+DA-6 spraying under two cultivation models; R: ridge covered with plastic film mulching and T: traditional flat planting without plastic mulching. The results indicated that RG4 treatment considerably decreased plant height, internode length, ear height, lodging rate, and center of gravity height, while improved the internode bending strength, cross-sectional area, cortical thickness, and stem vascular bundles as compared with rest of all other treatments. RG4 treatment considerably improved internode diameter, stem mechanical strength, filling degree, root growth, mean tilt angle, and lignin content, while significantly reducing LAI. In addition, RG4 considerably enhanced the quality of corn stems, such as increasing mechanical properties and enhancing the compressive strength of corn stalks that content of hemicellulose, cellulose, and lignin has been increased. Furthermore, RG4 treatment significantly improved grain yield by optimizing leaf layer structure and increasing bleeding saps levels, increasing the grains per row and ear. Thus, under the RG4 treatment maize lodging rate was decreased 72.1%, and increased WUE (52.8%), and grain yield (46.6%). In conclusion, the results clearly demonstrate that in the semi-arid regions risk of lodging can be avoided by spraying EC+DA-6 with ridge covered plastic film mulching to the enriched stalk quality, shaping plant morphological characteristics, and proving a stable cultivation model to improving maize productivity.

Selection of colored plastic-mulching films for the production of mini-tomatoes in the field

The objective of this research was to evaluate the effect of three plastic-mulching films of different colors in the cultivation of mini-tomato in the field. Two experiments were carried out: the first being sown in the summer and the second in the winter. Mini-tomatoes plants with distinct growing habit (determinate and indeterminate) were used and three plastic-mulching film color (black, black/silver, black/white) compared to control (uncovered soil) were tested. The design was in randomized blocks, 2x4 factorial schemes, with four repetitions. Soil temperature, productivity performance and quality of mini-tomatoes were determined. The plastic-mulching films increase the average soil temperature according to the color used. In summer, although small, the black/silver film improves the productive capacity of the mini-tomato with determined growth habit; however, none affects the total soluble solids content. In winter, the black plastic-mulching film favored the soluble solids content of both genotypes and the productivity of the indeterminate. The black plastic-mulching film is suggested as soil cover to produce mini-tomatoes in field conditions during the winter. In summer, low fruit yield quality can makes this technique unfeasible under field conditions.

Corrigendum to “Macro- and microplastic accumulation in soil after 32 years of plastic film mulching” [Environ. Pollut. 300, (2022), 118945]

Corrigendum to “Macro- and microplastic accumulation in soil after 32 years of plastic film mulching” [Environ. Pollut. 300, (2022), 118945]

Fungal necromass carbon contributes to organic carbon sequestration within soil macroaggregates under manure application combined with plastic film mulching

Fungal necromass carbon contributes to organic carbon sequestration within soil macroaggregates under manure application combined with plastic film mulching

A three-year record of CO2, CH4 and N2O emissions in maize fields influenced by mulching methods on the Loess Plateau, China

Exploring optimal mulching methods for maize production is critical to achieving a balance between maximizing yield and reducing negative environmental impacts in dryland agriculture. Therefore, a 3-yr field experiment was conducted to investigate the effects of three mulching methods—biodegradable plastic film mulching (BM), maize straw mulching (SM), and no mulching (NM)—on spring maize yield, greenhouse gas (GHGs) emissions (CO2, CH4, and N2O), soil factors, the net ecosystem GHG balance and greenhouse gas emission intensity (GHGI) on the Loess Plateau of China. The result showed indicated that CO2 and N2O are the primary sources of GHGs in dryland maize production. The yield of BM significantly increased 1.43–1.99 t ha−1 compared to NM, CO2 emissions (on average 32.83%) compared to the NM. And BM showed suitability for N2O emissions (3.7–11.2%). SM increased CO2 and N2O emissions (by 9.43–13.17% and 24.96–33.64%, respectively) compared to the NM. Structural equation model analysis showed that soil temperature was the most direct factor to affect GHGs. SM was the sink of net ecosystem GHGs, BM and NM were the source of net ecosystem GHGs. These results indicated that mulching emerges as a promising strategy for dryland agriculture. BM method can be used when the primary goal was to improve yield, while SM method is a better choice when the primary goal was to improve soil organic carbon sequestration and reduce net GHGs emissions. This study clarified the impacts of mulching methods on three GHGs emissions to provide information support for sustainable agriculture on the Loess Plateau.

Plastic film mulching increases crop yields and reduces global warming potential under future climate change

Identifying suitable cropping systems and planting areas with high yields and low greenhouse gas (GHG) emissions to adapt to climate change is essential for sustainable agricultural development. The DeNitrification-DeComposition (DNDC) model and the Coupled Model Inter-comparison Project Phase 6 (CMIP6) dataset were used to evaluate the impact of climate scenarios on the crop yields and global warming potential (GWP) of maize, winter wheat, and potato under plastic film mulching (PM) and without mulching (CK) systems on the Loess Plateau for 2020–2100. The result showed that the DNDC model could simulate crop yields and carbon dioxide, nitrous oxide, and methane emissions (adjusted R2 > 0.55, normalized root mean square error (nRMSE) < 0.32). Under multiple emission scenarios, the yields of maize and winter wheat increased linearly with time (p < 0.05), the GWP decreased linearly with time (p < 0.05), and the coefficients of variation of both were lower for the PM than CK, indicating that the impact of future climate change on PM system was small and can achieve synergy between food security and carbon reduction. The results of regional divergence characteristics suggested that areas with precipitation below 400 mm were suitable for maize cultivation, especially the PM system, while areas with precipitation above 400 mm were suitable for winter wheat cultivation – both of which could achieve the goals of high yield and low GHG emissions. This study presents an overview of spatiotemporal changes in production and ecological effects, providing a basis for developing agricultural management practices and cultivation areas to address climate change, and could promote the development of dryland agroecosystems in China in a green and sustainable direction.