Plasma-based Accelerators Research Articles

Laser-wakefield accelerators for high-resolution X-ray imaging of complex microstructures

Laser-wakefield accelerators (LWFAs) are high acceleration-gradient plasma-based particle accelerators capable of producing ultra-relativistic electron beams. Within the strong focusing fields of the wakefield, accelerated electrons undergo betatron oscillations, emitting a bright pulse of X-rays with a micrometer-scale source size that may be used for imaging applications. Non-destructive X-ray phase contrast imaging and tomography of heterogeneous materials can provide insight into their processing, structure, and performance. To demonstrate the imaging capability of X-rays from an LWFA we have examined an irregular eutectic in the aluminum-silicon (Al-Si) system. The lamellar spacing of the Al-Si eutectic microstructure is on the order of a few micrometers, thus requiring high spatial resolution. We present comparisons between the sharpness and spatial resolution in phase contrast images of this eutectic alloy obtained via X-ray phase contrast imaging at the Swiss Light Source (SLS) synchrotron and X-ray projection microscopy via an LWFA source. An upper bound on the resolving power of 2.7 ± 0.3 μm of the LWFA source in this experiment was measured. These results indicate that betatron X-rays from laser wakefield acceleration can provide an alternative to conventional synchrotron sources for high resolution imaging of eutectics and, more broadly, complex microstructures.

High-sensitivity plasma density retrieval in a common-path second-harmonic interferometer through simultaneous group and phase velocity measurement

Precise measurements of the plasma density in ionized gas cells and discharged capillaries are critical to the design and operation of plasma-based accelerators, active plasma lenses, and plasma-based radiation sources. In this manuscript, a spectral-domain common-path second-harmonic interferometer is upgraded with the simultaneous measurement of the group and phase velocity, allowing for high-sensitivity density characterization (from the phase velocity advance) without the need for phase tracking from zero-density (enabled by the group velocity delay). The technique is applied to 1.5-cm-long plasma structures, without density ambiguity in parameter scans with >2π phase jumps. The single-shot sensitivity in phase retrieval is demonstrated at 63 mrad, equivalent to a density-length product of 1.8·1015 cm−2. This is an improvement of ×45 compared to group velocity analysis alone.

Improvement of Properties of Self-Injected and Accelerated Electron Bunch by Laser Pulse in Plasma, Using Pulse Precursor

The accelerating gradients in conventional linear accelerators are currently limited to ~100 MV/m. Plasma-based accelerators have the ability to sustain accelerating gradients which are several orders of magnitude greater than that obtained in conventional accelerators. Due to the rapid development of laser technology the laser-plasma-based accelerators are of great interest now. Over the past decade, successful experiments on laser wakefield acceleration of electrons in the plasma have confirmed the relevance of this acceleration. Evidently, the large accelerating gradients in the laser plasma accelerators allow to reduce the size and to cut the cost of accelerators. Another important advantage of the laser-plasma accelerators is that they can produce short electron bunches with high energy. The formation of electron bunches with small energy spread was demonstrated at intense laser–plasma interactions. Electron self-injection in the wake-bubble, generated by an intense laser pulse in underdense plasma, has been studied. With newly available compact laser technology one can produce 100 PW-class laser pulses with a single-cycle duration on the femtosecond timescale. With a fs intense laser one can produce a coherent X-ray pulse. Prof. T. Tajima suggested utilizing these coherent X-rays to drive the acceleration of particles. When such X-rays are injected into a crystal they interact with a metallic-density electron plasma and ideally suit for laser wakefield acceleration. In numerical simulation of authors, performed according to idea of Prof. T.Tajima, on wakefield excitation by a X-ray laser pulse in a metallic-density electron plasma the accelerating gradient of several TV/m has been obtained. It is important to form bunch with small energy spread and small size. The purpose of this paper is to show by the numerical simulation that some precursor-laser-pulse, moved before the main laser pulse, controls properties of the self-injected electron bunch and provides at certain conditions small energy spread and small size of self-injected and accelerated electron bunch.

High Brightness Electron Beams from Plasma-based Acceleration

High Brightness Electron Beams from Plasma-based Acceleration

Uniform Focusing of Sequence of Relativistic Positron Bunches in Plasma

Plasma-based accelerators sustain accelerating gradients which are several orders greater than obtained in conventional accelerators. Focusing of electron and positron beams by wakefield, excited in plasma, in electron-positron collider is very important. The focusing mechanism in the plasma, in which all electron bunches of a sequence are focused identically, has been proposed by authors earlier. The mechanism of focusing of a sequence of relativistic positron bunches in plasma, in which all positron bunches of sequence are focused identically and uniformly, has been investigated in this paper by numerical simulation by 2.5D code LCODE. Mechanism of this identical and uniform focusing involves the use of wave-length λ, which coinciding with double longitudinal dimension of bunches λ=2Db, the first bunch current is in two times smaller than the current of the following bunches of sequence and the distance between bunches equals to one and a half of wavelength 1.5λ. We numerically simulate the self-consistent radial dynamics of lengthy positron bunches in homogeneous plasma. In simulation we use the hydrodynamic description of plasma. In other words the plasma is considered to be cold electron liquid, and positron bunches are aggregate of macroparticles. Positron bunches are considered to be homogeneous cylinders in the longitudinal direction. Positrons in bunches are distributed in radial direction according to Gaussian distribution. It is shown that in this case only first bunch is in the finite longitudinal electrical wakefield Ez¹0. Other bunches are in zero longitudinal electrical wakefield Ez=0. Between bunches of this sequence longitudinal electrical wakefield and radial force are not zero Ez¹0, Fr¹0. The focusing radial force in regions, occupied by bunches, is constant along each bunch Fr=const. Between bunches the radial force is inhomogeneous Fr¹const. All positron bunches of sequence are focused identically and uniformly.

Suppression of Beam Hosing in Plasma Accelerators with Ion Motion.

Mitigation of the beam hose instability in plasma-based accelerators is required for the realization of many applications, including plasma-based colliders. The hose instability is analyzed in the blowout regime including plasma ion motion, and ion motion is shown to suppress the hose instability by inducing a head-to-tail variation in the focusing force experienced by the beam. Hence, stable acceleration in plasma-based accelerators is possible, while, by use of proper bunch shaping, minimizing the energy spread and preserving the transverse beam emittance.

Direct measurement of focusing fields in active plasma lenses

Active plasma lenses have the potential to enable broad-ranging applications of plasma-based accelerators owing to their compact design and radially symmetric kT/m-level focusing fields, facilitating beam-quality preservation and compact beam transport. We report on the direct measurement of magnetic field gradients in active plasma lenses and demonstrate their impact on the emittance of a charged particle beam. This is made possible by the use of a well-characterized electron beam with 1.4 mm mrad normalized emittance from a conventional accelerator. Field gradients of up to 823 T/m are investigated. The observed emittance evolution is supported by numerical simulations, which suggest the potential for conservation of the core beam emittance in such a plasma lens setup.

Generation of GeV Electron Beam From a Laser-Plasma Accelerator and Its Prospect as a Desktop Source of Energetic Positrons and Gamma Rays For Applications

Laser wakefield acceleration (LWFA) is a plasma-based electron beam accelerator technology that can deliver electron beams with energies up to several GeVs, depending mainly on the power of the used laser system and the electron injection scheme. Here, we present the results from a GeV electron accelerator with a high reproducibility and a charge up to 30 pC using 110–120-TW laser pulses and by employing the well-established self-truncated ionization injection (STII) mechanism. These electron beams can be further used via bremsstrahlung in high-Z solid materials for the generation of gamma-rays and positron beams, therefore, composing a compact radiation source for various applications. Here, we use the Monte Carlo simulation code “Geant4” for studying the properties of those radiations. As expected, the characteristics of the generated gamma-rays and positron beams showed a strong dependence on the incident electron beam, target material, and thickness. The trend of positrons and gamma-rays energies and yield is shown for different high-Z to low-Z targets with the same areal mass density. Thicknesses of the target material in terms of its radiation length have been varied periodically in order to find the optimal thickness for obtaining the maximum energy and yield of the radiations. A trend can be seen in terms of energy spectra of the gamma-rays and positrons while increasing the thickness of the targets. The amount of radiation yields is also crucial to the choice of appropriate thickness of the target. In addition, this paper provides a brief description of the electrodynamics processes such as bremsstrahlung and electron–positron pair production initiated by LWFA electron beams.

Two-stage laser-driven plasma acceleration with external injection for EuPRAXIA

The EuPRAXIA (European Particle Research Accelerator with excellence In Applications) project aims at producing a conceptual design for the worldwide plasma-based accelerator facility, capable of delivering multi-GeV electron beams with high quality. This accelerator facility will be used for various user applications such as compact X-ray sources for medical imaging and high-energy physics detector tests. EuPRAXIA explores different approaches to plasma acceleration techniques. Laser-driven plasma wakefield acceleration with external injection of an RF-generated electron beam is one of the basic research directions of EuPRAXIA. We present studies of electron beam acceleration to GeV energies by a two-stage laser wakefield acceleration with external injection from an RF accelerator. Electron beam injection, acceleration and extraction from the plasma, using particle-in-cell simulations, are investigated.

Diagnostics for plasma-based electron accelerators

Plasma-based accelerators that impart energy gain as high as several GeV to electrons or positrons within a few centimeters have engendered a new class of diagnostic techniques very different from those used in connection with conventional radio-frequency (rf) accelerators. The need for new diagnostics stems from the micrometer scale and transient, dynamic structure of plasma accelerators, which contrasts with the meter scale and static structure of conventional accelerators. Because of this micrometer source size, plasma-accelerated electron bunches can emerge with smaller normalized transverse emittance (en<0.1 mm mrad) and shorter duration (τb∼1 fs) than bunches from rf linacs. Single-shot diagnostics are reviewed that determine such small en and τb noninvasively and with high resolution from wide-bandwidth spectral measurement of electromagnetic radiation the electrons emit: en from x rays emitted as electrons interact with transverse internal fields of the plasma accelerator or with external optical fields or undulators; τb from THz to optical coherent transition radiation emitted upon traversing interfaces. The duration of ∼1 fs bunches can also be measured by sampling individual cycles of a copropagating optical pulse or by measuring the associated magnetic field using a transverse probe pulse. Because of their luminal velocity and micrometer size, the evolving structure of plasma accelerators, the key determinant of accelerator performance, is exceptionally challenging to visualize in the laboratory. Here a new generation of laboratory diagnostics is reviewed that yield snapshots, or even movies, of laser- and particle-beam-generated plasma accelerator structures based on their phase modulation or deflection of femtosecond electromagnetic or electron probe pulses. Spatiotemporal resolution limits of these imaging techniques are discussed, along with insight into plasma-based acceleration physics that has emerged from analyzing the images and comparing them to simulated plasma structures.

OA083] Toward 4d micro-CT and radiotherapy of small animals using all-optical, ultrashort X-ray sources: feasibility study and preliminary experimental results

Purpose All-optical, laser-driven X/gamma-ray sources, based on the primary electron acceleration via the Laser WakeField Acceleration (LWFA) process, have now entered a mature phase in terms of beam parameters, shot-to-shot stability, and reliability, so as to be considered as promising tools in medical physics. The high electron acceleration gradient results in the possibility of accelerating electrons up to the 100s MeV range over very short distances and thus opening the way to the generation of high energy photons using “table-top” machines. The PRELUDE (PREclinical Laser-based Ultrafast Diagnostics and therapy) project is ongoing, as a collaboration among different Italian Institutions aimed at studying the application of a laser-driven X-ray source for 4D micro-CT and radiotherapy of small animals. Methods As a first step, the exploitation of a Bremsstrahlung source driven by a LWFA, plasma-based accelerator is investigated, both theoretically and experimentally. The preliminary experimental results focused on characterizing the photon source, based on a 10TW ultrashort laser system for micro-CT of small animals is discussed. Issues related to both the primary electron acceleration and the generation of secondary photons via the Bremsstrahlung process will be discussed, including both numerical and experimental results. Results The X-ray spectrum, beam intensity, e- contamination and photon dosimetry have been simulated using the GEANT4 toolkit on top of experimental measurements of the e- spectrum obtained using our setup and numerical estimations of the accelerated charge per pulse. Proof-of-principle radiographic images of physical phantoms obtained with photostimulable phosphor image plates are presented. Conclusions We presented a system for small animal 4D-CT and radiotherapy based on a laser-driven X-ray source. The results of a theoretical and numerical study of a 4D micro-CT device based on a more advanced all-optical X-ray source based on Thomson scattering will be presented.

3D-printed capillary for hydrogen filled discharge for plasma based experiments in RF-based electron linac accelerator.

Plasma-based acceleration experiments require capillaries with a radius of a few hundred microns to confine plasma up to a centimeter scale capillary length. A long and controlled plasma channel allows to sustain high fields which may be used for manipulation of the electron beams or to accelerate electrons. The production of these capillaries is relatively complicated and expensive since they are usually made with hard materials whose manufacturing requires highly specialized industries. Fine variations of the capillary shape may significantly increase the cost and time needed to produce them. In this article, we demonstrate the possibility of using 3D printed polymeric capillaries to drive a hydrogen-filled plasma discharge up to 1 Hz of repetition rate in an RF based electron linac. The plasma density distribution has been measured after several shot intervals, showing the effect of the surface ablation on the plasma density distribution. This effect is almost invisible in the earlier stages of the discharge. After more than 55000 shots (corresponding to more than 16 h of working time), the effects of the ablation on the plasma density distribution are not evident and the capillary can still be used. The use of these capillaries will significantly reduce the cost and time for prototyping, allowing us to easily manipulate their geometry, laying another building block for future cheap and compact particle accelerators.

Trains of electron micro-bunches in plasma wake-field acceleration

Plasma-based charged particle accelerators have been intensively investigated in the past three decades due to their capability to open up new horizons in accelerator science and particle physics yielding electric field accelerating gradient more than three orders of magnitudes higher than in conventional devices. At the current stage the most advanced and reliable mechanism for accelerating electrons is based on the propagation of an intense laser pulse or a relativistic electron beam in a low density gaseous target. In this paper we concentrate on the electron beam-driven plasma wake-field acceleration and demonstrate using 3D PiC simulations that a train of electron micro-bunches with ∼10 fs period can be generated behind the driving beam propagating in a density down-ramp. We will discuss the conditions and properties of the micro-bunches generated aiming at understanding and study of multi-bunch mechanism of injection. It is show that the periodicity and duration of micro-bunches can be controlled by adjusting the plasma density gradient and driving beam charge.

Beam Quality Limitations of Plasma-Based Accelerators

Beam Quality Limitations of Plasma-Based Accelerators

Frontiers of beam diagnostics in plasma accelerators: Measuring the ultra-fast and ultra-cold

Advanced diagnostics are essential tools in the development of plasma-based accelerators. The accurate measurement of the quality of beams at the exit of the plasma channel is crucial to optimize the parameters of the plasma accelerator. 6D electron beam diagnostics will be reviewed with emphasis on emittance measurement, which is particularly complex due to large energy spread and divergence of the emerging beams, and on femtosecond bunch length measurements.

Accurate modeling of the hose instability in plasma wakefield accelerators

Hosing is a major challenge for the applicability of plasma wakefield accelerators and its modeling is therefore of fundamental importance to facilitate future stable and compact plasma-based particle accelerators. In this contribution, we present a new model for the evolution of the plasma centroid, which enables the accurate investigation of the hose instability in the nonlinear blowout regime. It paves the road for more precise and comprehensive studies of hosing, e.g., with drive and witness beams, which were not possible with previous models.

EuPRAXIA@SPARC_LAB: The high-brightness RF photo-injector layout proposal

At EuPRAXIA@SPARC_LAB, the unique combination of an advanced high-brightness RF injector and a plasma-based accelerator will drive a new multi-disciplinary user-facility. The facility, that is currently under study at INFN-LNF Laboratories (Frascati, Italy) in synergy with the EuPRAXIA collaboration, will operate the plasma-based accelerator in the external injection configuration. Since in this configuration the stability and reproducibility of the acceleration process in the plasma stage is strongly influenced by the RF-generated electron beam, the main challenge for the RF injector design is related to generating and handling high quality electron beams. In the last decades of R&D activity, the crucial role of high-brightness RF photo-injectors in the fields of radiation generation and advanced acceleration schemes has been largely established, making them effective candidates to drive plasma-based accelerators as pilots for user facilities. An RF injector consisting in a high-brightness S-band photo-injector followed by an advanced X-band linac has been proposed for the EuPRAXIA@SPARC_LAB project. The electron beam dynamics in the photo-injector has been explored by means of simulations, resulting in high-brightness, ultra-short bunches with up to 3 kA peak current at the entrance of the advanced X-band linac booster. The EuPRAXIA@SPARC_LAB high-brightness photo-injector is described here together with performance optimisation and sensitivity studies aiming to actual check the robustness and reliability of the desired working point.

Comparative study of active plasma lenses in high-quality electron accelerator transport lines

Electrically discharged active plasma lenses (APLs) are actively pursued in compact high-brightness plasma-based accelerators due to their high-gradient, tunable, and radially symmetric focusing properties. In this manuscript, the APL is experimentally compared with a conventional quadrupole triplet, highlighting the favorable reduction in the energy dependence (chromaticity) in the transport line. Through transport simulations, it is explored how the non-uniform radial discharge current distribution leads to beam-integrated emittance degradation and a charge density reduction at focus. However, positioning an aperture at the APL entrance will significantly reduce emittance degradation without additional loss of charge in the high-quality core of the beam. An analytical model is presented that estimates the emittance degradation from a short beam driving a longitudinally varying wakefield in the APL. Optimizing laser plasma accelerator operation is discussed where emittance degradation from the non-uniform discharge current (favoring small beams inside the APL) and wakefield effects (favoring larger beam sizes) is minimized.

Plasma ramps caused by outflow in gas-filled capillaries

Plasma confinement inside capillaries has been developed in the past years for plasma-based acceleration to ensure a stable and repeatable plasma density distribution during the interaction with either particles or laser beams. In particular, gas-filled capillaries allow a stable and almost predictable plasma distribution along the interaction with the particles. However, the plasma ejected through the ends of the capillary interacts with the beam before the inner plasma, affecting the quality of the beam. In this article we report the measurements on the evolution of the plasma flow at the two ends of a 1 cm long, 1 mm diameter capillary filled with hydrogen. In particular, we measured the longitudinal density distribution and the expansion velocity of the plasma outside the capillary. This study will allow a better understanding of the beam–plasma interaction for future plasma-based experiments.

Plasma-based wakefield accelerators as sources of axion-like particles

We estimate the average flux density of minimally-coupled axion-like particles (ALPs) generated by a laser-driven plasma wakefield propagating along a constant strong magnetic field. Our calculations suggest that a terrestrial source based on this approach could generate a pulse of ALPs whose flux density is comparable to that of solar ALPs at Earth. This mechanism is optimal for ALPs with mass in the range of interest of contemporary experiments designed to detect dark matter using microwave cavities.